techno multi-purpose check valves for...

VALVES & MEASUREMENT

TECHNO™ Multi-Purpose Check Valves for Industry

TECHNO™


BRP-TEC-GENERAL-0110/11 SWP-3M

TECHNO™2



TECHNO™ 3

TECHNO™ MULTI-PURPOSE CHECK VALVES FOR INDUSTRY

Introduction .................................................................................................. 4

Elastomer Hinge Designs ............................................................................... 5

Elastomer Hinge Design ................................................................................ 6

TECHNO’s Metal Hinged Design .................................................................... 7

How to Order ............................................................................................... 8

How to Order ............................................................................................... 9

Aftermarket Services ..................................................................................... 10

Trademark Information ................................................................................. 11

TABLE OF CONTENTS



TECHNO™4

Cameron’s Valves & Measurement (V&M) group is a leading provider of valves

and measurement systems to the oil and gas industry. The group’s products are

primarily used to control, direct and measure the flow of oil and gas as it is moved

to refineries, petrochemical plants and industrial centers for processing.

The Distributed Valves division provides valves products that are sold through

distributor networks worldwide, for use in both oil and gas and industrial

applications and include such widely recognized brand names as DEMCO®,

NAVCO®, NUTRON®, THORNHILL CRAVER®, TECHNO®, TOM WHEATLEY®,

WHEATLEY® and WKM®.

The design features of TECHNO’s elastomer hinge and metal hinge check valve

including a tight shutoff feature, and the ability to be mounted in almost any

position. TECHNO Check Valves are known for their ease of maintenance and

exceptional flow characteristics. TECHNO provides economical and dependable

multi-purpose check valves for use within a wide range of service conditions.

Oklahoma City, Oklahoma



TECHNO™ 5

TECHNO™ MULTI-PURPOSE CHECK VALVES FOR INDUSTRYELASTOMER HINGE DESIGNS

The Short Form (SF) Wafer

Is the perfect design for Air Service and Light Duty.Liquid applications. Available in sizes 1” - 72”

Full Flanged

125#, 150# and 300#Available in sizes 1” - 48”

Male Threaded Ends, Grooved Ends & Plain Ends

Available in sizes 1” - 20”

Deep Well

Female threaded valve designed for deep Well.Applications down to 1000 ft.

Available in sizes 1” - 12”



TECHNO™6

C

B

A

TECHNO™ MULTI-PURPOSE CHECK VALVES FOR INDUSTRYELASTOMER HINGE DESIGN

DESIGN FEATURES:

Unrestricted Full Port Seatless Design

• Maximumflowarea

• Minimumpressuredrop

Elimination of Metal-to-Metal Rotating Parts

• Nopinstowear

• Noseatstowear

• Nospringtobreak

Non-Slam Quick Closure Feature

• Minimumtravelofvalveplatesfromfullopen

to full closed position reduces closing time

• Eliminationofspringrestricts“slamming”

action

Tight Shut-Off Feature

• Flexibleelastomerprovidesperfectseal

• Sealstightlyatextremelylowbackpressure

Can be mounted in almost any position

* Temperature range is for general guidance. The figures may vary with application and body/internal materials. Consult factory for materials, sizes and pressure ratings not shown as standard.

Standard Materials & Configuration

Body InternalsElastomer Materials

Body ConfigurationMaterials Temperature Range*

Aluminum Aluminum Buna-N -60°F to 225°F Male Threaded Ends

Brass Brass EPDM -40°F to 225°F Female Threaded Ends

Cast Iron 316 Stainless Steel VITON -20°F to 400°F Plain Ends

Carbon Steel SILICONE -100°F to 500°F Grooved Ends

316 Stainless Steel Flanged Ends

Wafer Style

D

G

E

F

A. FULL PORT Provides maximum flow with minimum pressure loss.B. VALVE PLATES Offers metal support and minimum travel.C. SEALING MEMBER Provides tight shut-off and prolonged cycle life.D. HINGE POST Precision air foil design offers streamlined flow.E. TRAVEL STOP Prevents over-travel of plates. Location is size dependent,

smaller valves have stops attached to hinge clamp.F. CLAMP PLATE Provides added support.G. HINGE CLAMP Remains stationary, no metal components around hinge

post rotation.



TECHNO™ 7

TECHNO™ MULTI-PURPOSE CHECK VALVES FOR INDUSTRYTECHNO’S METAL HINGED DESIGN

Standard Models & Materials of Construction

Style Body Valve Plates Seals Springs Trim* ASME Class

5050 Cast Iron Bronze EPDM 316 Stainless Steel 316 Stainless Steel 125

5051 Carbon Steel Carbon Steel ++ Buna-N 316 Stainless Steel 316 Stainless Steel 150

5051-316 316 Stainless Steel 316 Stainless Steel Buna-N 316 Stainless Steel 316 Stainless Steel 150





* Trim items include: Shaft Supports, Clamp Plates and Fasteners. Teflon Thrust Washers are Standard Through 12” Size.++ 316 Stainless Steel Valve Plates Standard on 2” to 6” Sizes.

** This temperature is for general guidance. The figures may vary with application and body/internal materials.+ 316 Stainless Steel Thrust Washers are Standard with Metal-to-Metal Seal Option.

The industry has long awaited the dual plate metal

hinged check valve that offers the innovative features

of the new TECHNO design.

The ease of maintenance, the exceptional flow

characteristics and increased safety by elimination of

body leakage, allows this check valve to be a valve of

choice industry-wide.

Flo

w

Spring Data

Materials Temperature Range**INCONEL 600 to 750°F

INCONEL X-750 to 1000°F

Seal Data

Materials Temperature Range**Buna-N -60°F to 225°F

EPDM -40°F to 300°F

Viton -20°F to 400°F

Teflon -20°F to 450°F

Silicone -90°F to 500°F

Metal-to-Metal + -400°F to 1000°F

Clamp Plates

Replaceable Seals(5050 & 5051 Only)

Body

Valve Plates

Springs

Shaft

Thrust Washers

Shaft Supports



TECHNO™8

TECHNO™ MULTI-PURPOSE CHECK VALVES FOR INDUSTRYHOW TO ORDER

Size

1.0 = 1”

1.3 = 1 1/4”

1.5 = 1 1/2”

2.0 = 2”

2.5 = 2 1/2”

3.0 = 3”

4.0 = 4”

5.0 = 5”

6.0 = 6”

8.0 = 8”

10.0 = 10”

12.0 = 12”

Through

72.0 = 72”

XXX = Other**

Valve Series

DPW = Dual Plate Wafer Check, ASME rated 5050, 5051, 5053, 5056

EHF = Elastomer Hinge Flanged 5003, 5004, 5102, 5107

EHW = Elastomer Hinge Short Form Wafer 5118, 5296, 5355, 5412

EHL = Elastomer Hinge Short Form Lug (5463) 5463-300

EHT = Elastomer Hinge Threaded Valve (5002)

EHV = Elastomer Hinge Victaulic Grooved Valve (5103)

EHP = Elastomer Hinge Plain End Valve (5104)

Body Material

AL = Alluminum

BR = Brass 5002 only

CI = Cast Iron

CS = Carbon Steel

WC = Cast Steel, A216 Gade WCB

36 = 316 Stainless Steel

Internal Material

AL = Alluminum

BR = Brass 5002 only

BZ = Bronze (DPW)

CS = Carbon Steel

WC = Cast Steel, A216 Grade WCB

36 = 316 Stainless Steel

XX = Other**

Size Valve Series Body Material Internal Materials

SAMPLE:

6 . 0 E H T C S A L



TECHNO™ 9

TECHNO™ MULTI-PURPOSE CHECK VALVES FOR INDUSTRYHOW TO ORDER

Seal Material

B = Buna-N

U = EPDM

M = Metal (Metal Hinge Valves Only)

S = Silicone

T = Teflon (Metal Hinge Valves Only)

V = Viton A

XX = Other**

Spring Material

32 = 302 SS

36 = 316 SS

60 = Inconel 600

75 = Inconel X-750

NS = No Spring

XX = Other**

Valve Rating

A12 = ASME 125

A15 = ASME 150

A60 = ASME 600

030 = 30 psi-cwp

050 = 50 psi-cwp

100 = 100 psi-cwp

125 = 125 psi-cwp

150 = 150 psi-cwp

300 = 300 psi-cwp

450 = 450 psi-cwp

XXX = Other**

End Connections

RF = Raised Face

FF = Flat Face

MP = Male Threaded Ends

FP = Female Threaded Ends

VC = Victaulic Grooved

PE = Plain Ends

XX = Other**

Options*

Consult factory for options such as:

Epoxy Coat

Drain Holes

Bypass Holes

Special Ports

Special Paint

Fasteners

Etc.

* TECHNO assigns option suffix numbers to identify special valves. Once an option number is assigned to specify the special valve, that number can then be used to

reorder an identical valve. Consult factory for options.** Other: “X” or “XX” or “XXX” indicates a choice other than standards shown. Note: Certain combinations are not available.

Seal Material

Valve RatingSpring Material Options

SAMPLE:

B

End Connections

3 2 1 5 0 M P 1 4 5



TECHNO™10

CAMSERV™ AFTERMARKET SERVICES

Cameron’s Aftermarket Services’ goal is to help our

customers lower the total cost of valve ownership. To

that end we offer a full range of services from over

twenty-five Service Centers worldwide and can provide

experienced personnel trained to meet the specific service

requirements of each valve type.

Aftermarket Services

• Suppliesreplacementvalvesandparts:

– Maintains a full inventory of new and

reconditioned valves for immediate delivery

– Provides factory warranty support for all

Cameron OEM brands as well as service for most

other valves

• FieldService&TechnicalSupport

– Field service technicians on call 24 hours a day

7 days a week to handle service issues wherever

they arise

– Provides equipment installation, field repairs, as

well as track and perform scheduled

maintenance

• CustomerPropertyRepair

– The Customer Property Repair program allows

Cameron valve customers to store assets at our

service centers throughout the world

– Valves tracked in electronic database accessible

through the Internet

• RemanufacturedProducts

– Offers a broad range of API-compliant

reconditioned equipment with fast delivery

• TotalValveManagement

– Supply and service automation and control

packages

– Assist with valve installation, commissioning and

start-up



TECHNO™ 11

TRADEMARK INFORMATION

TECHNO™ is a registered trademark which is owned by Cameron.

This document contains references to registered trademarks or product designations,

which are not owned by Cameron.

Trademark Owner

INCONEL INCO Nickel Sales, Inc.

MONEL INCO Alloys International, Inc.

TEFLON E.I. DuPont De Nemours & Company

VITON E.I. DuPont De Nemours & Company

CERTIFICATIONS ISO 9001 Certified


© Cameron Printed in USA 10/11-SWP-3M BRP-TEC-GENERAL-01

Valves & Measurement3250 Briarpark Drive, Suite 300Houston, TX 77042USA Toll 800 323 9160

For the most current contact and location information go to: www.c-a-m.com

Cameron strives for continuous improvement in all aspects of our business. Cameron reserves the right to modify designs and specifications without notice or obligation. Nothing contained in this brochure is intended to extend any type of warranty, expressed or implied.

techno multi-purpose check valves for...

Documents