tender details part-ii

रा ट्रीय कोिशका िवज्ञान कद्र NATIONAL CENTRE FOR CELL SCIENCE

(An Autonomous Institution of the Department of Biotechnology, Govt. of India) N.C.C.S. Complex, Ganeshkhind, Pune University Campus, Pune 411007.

PART-II (FINACIAL/PRICE BID)

TENDER DOCUMENT FOR INTERIOR WORKS AT N.C.C.S., PUNE

DUE DATE FOR SUBMISSION: 23.09.2014 @ 13 HRS

TO BE SUBMITTED TO: THE DIRECTOR National Centre For Cell Science PUNE UNIVERSITY CAMPUS, Pune 411007 (Maharashtra, India)

ARCHITECT/CONSULTANT: Shirish Beri & Associates 503, Skyville, Near Ram Mangal Karyalaya University ring road, E ward Kolhapur – 416004.

NAME AND ADDRESS OF BIDDER:_____________________

NATIONAL CENTRE FOR CELL SCIENCE, PUNE

BILL OF QUANTITIES FOR INTERIOR WORKS AT "A" BLDG. UNIT RATE COMPLETE (MATERIAL+

LABOUR)

TOTAL AMOUNT COMPLETE (MATERIAL+

LABOUR)

TOTAL AMOUNT LABOUR ONLY

(Rs.) (Rs.) (Rs.)I INTERIORS WORKS

1.0.

LOCATION CODE NO DWG NO QTYA 7.2B 7.2C 7.2D AD02 24E AD02 11.88

LOCATION CODE NO DWG NO QTYA 1.8B 3C 1.5DE

A- SEMINAR HALL AND CONFOCOLLOCATION

B- LIBRARYC- FACSD- ADMIN GR FLE- ADMIN BASEMENT

DESCRIPTION OF ITEM UNITS. NO TOTAL QTY

Unit Rate in Words:

SQ.MM

6.3

DEMOLITION

Demolition of Brick Walls

Demolition of Concrete Wall1.2.

1.1.

Unit Rate in Words:

Demolition of existing concrete of anythickness at site, including initial preparationslike removing / dismanteling existing doors,windows or any electrification or telephonelines if need to be shifted with removing andcarting away all the debris and disposal incontractor's own premises or elsewhere at hisown responibility.Site should be kept clean forwork with no remains of any material fromexisting structure. With all leads, lifts,plastering of existing damaged walls /surfaces with necessary finishing, curing, etc

Demolition of existing walls of any thicknessat site, with removing and carting away all thedebris and disposal in contractor's ownpremises or elsewhere at his ownresponibility.Site should be kept clean forconstruction with no remains of any materialfrom existing structure. With all leads, lifts,plastering of existing damaged walls /surfaces with necessary finishing, curing, etc

SQ.M 57.48

Page 1 of 55 Seal and Sign of the Bidder



LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)


LOCATION CODE NO DWG NO QTYA 25B 25C 16DE

LOCATION CODE NO DWG NO QTYABCD AD02 1.5E AD02 1.5

SQ.M 66

SQ.M 3

Unit Rate in Words:

Unit Rate in Words:

Finishing of existing marble floor as after wallsdemolished and shown in drawing, to matchadjacent flooring in type & level includinglineout, labour, tools, tackles and making goodany broken tiles to be retained, carting awaydebris with all leads with necessary finishing,curing, cleaning etc. Finished level of stone tobe levelled with adjacent floor

1.3.

1.4.

Dismanteling and disposing of existing falseceiling in gypsum boards including GI framingabove restricted to specified area.Care shouldbe taken of items like AC or existing pipingand wiring to be retained and on removinglight fixtures with adapters & light fittingsinside should be stacked in proper manner.Disposal to be done immediately andremoving and carting away all the debris anddisposal in contractor's own premises orelsewhere at his own responibility.Site shouldbe kept clean for work with no remains of anymaterial from existing structure. Rates includetools, labour,handling, storage with all leads,lifts, plastering of existing damaged walls /surfaces with necessary finishing & cleaning.

Finishing of Flooring

Demolition of False ceiling




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)


LOCATION CODE NO DWG NO QTYABCD 1.2E AD02 0.5

2

LOCATION CODE NO DWG NO QTYAB 3C 2DE

1.7

SQ M 5

Unit Rate in Words:

cu m

Unit Rate in Words:

CIVIL WORKS

Demolition of existing concrete lintels of anythickness at site, including initial preparationslike removing / dismanteling existing doors,windows or any electrification or telephonelines if need to be shifted. Costs to alsoinclude material, labour & tools & machinery ifneeded, all leads, lifts, making good ofdamaged existing walls / surfaces withnecessary finishing, curing, etc. removing andcarting away all the debris and disposal incontractor's own premises or elsewhere at hisown responibility.Site should be kept clean forwork with no remains of any material.

Demolition of Concrete & making good finished with POP

1.5.

2.1. BRICKWORK

Providing & fixing 150mm THK. second classBurnt Brick Masonry conventional / I.S. typebricks in cement mortar 1:6 in all wallsincluding labour, bailing out water, strikingjoints on unexposed faces, raking out joints onexposed faces if indicated & wateringetc.cleaning complete.Both sides of wallsfinished in plaster and POP.




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)


LOCATION CODE NO DWG NO QTYA 560B 516.5C 449.76D 330E 240


3

SQ M 257LOCATION CODE NO DWG NO QTY

A 216B 25C 16DE

Unit Rate in Words:

2096.3

875SQ M

Unit Rate in Words:

sqm

Parquet Flooring & skirting

Flooring

Painting

3.1.

Providing and applying Lustre Paint ofapproved brand, make and shade as specifiedby Architects, in two coats of required shadesto give even shades, over one coat of primeras per manufacturer's specifications, in allpositions to old and new surfaces afterthoroughly brushing the surfaces free frommortar droppings and other foreign matter,filling cracks with 'Crackseal' expansion filler,preparing the surface, all unevenness to belevelled applying putty on entire surface ofincluding filling up the undulations and sandpapering, scaffolding, etc., cleaning complete.

PVC Flooring

providing and laying of the 3mm PVC flooringwith the required finishing to be done beforeleveling existing floors with POP includingmaterials, labours, claening etc., completeand after laying of the tiles / sheet of approved colour and texture

2.2.

2.3.




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)



LOCATION CODE NO DWG NO QTYA AD15 13.81B AD16 13.81C AD17 13.81DE

SQM 299LOCATION CODE NO DWG NO QTY

A AD17 230B 39C 30DE

LOCATION CODE NO DWG NO QTYABCD AD01 55E

Unit Rate in Words:

55

41.43SQM

Unit Rate in Words:

RM 84

SQM

Unit Rate in Words:

Unit Rate in Words:

3.2.

3.3. Enclosing duct in metal deckingproviding and lfixng deck slab of 1.2 mm thksupported by ISMC 250 fixed to perifery onMS gusset plates 5mm thk bolted to beamswith chemical self expanding bolts as perdesign including welding fittting & connectingin line and level, supported at entire periferywith 50X50X6 MSA.

Provision of Modular False ceiling

600 X 600 Ceiling-Fine Fissured High NRC /High CAC 1821M - with Beveled Tegular withSillhoutte edge, Main Runner - 15mm x44mm x 3600mm Ceiling Suspension System,Grid system - Concealed T-system; CrossTees - 15mm x 44mm x 1200mm and 15mmx 44mm x 600mm - Perimeter section (shadow line wall angle) - 15mm x 15mm x25mm x 3000mm Lay -in Tile 600 x 600mm x15mm Mineral Fiberboard tile with virtuallyinvisible micro perforations and finelygranulated surface.Pin hole finish

Skirtingproviding and lfixng of the 12mm OAKHardwood flooring with tongue and groove orsimilar locking arrangement of Armstrong orequivalent as per selection and approval ofArchitect with the required finishing to be donebefore and after laying of the tiles / planks ofapproved colour and texture

Grid Ceilling

3.4.

3.5.




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)


LOCATION CODE NO DWG NO QTYAB AD17 15C AD17 11.25DE

LOCATION CODE NO DWG NO QTYABCD AD02 25E 25

LOCATION CODE NO DWG NO QTYABCD AD07 12E AD02 4.79

RM 50

Unit Rate in Words:

Unit Rate in Words:

SQM

Unit Rate in Words:

RM 26.25

16.79

S S RailingProviding and fixing AISI 304 Stainless Steelrailing of Kich India make top mounted flatbaluster system with flat railing posts atspecified distance having horizontal 10mm diaSS pipes 2 nos. at equal distances and tophand rail of 60mm dia AISI 304 with curvedcorners as per radius as directed, with allnecessary fittings and fixtures, as per detaileddrawing, etc., complete.

Providing & fixing New frame size50X50mmPanels to opening of duct in heavy dutyanodized aluminium section. Fixing 8mm thkfloat glass with opaque film of approveddesign & make.The entire panels to be madeout of 0.6m coated bronze anodisedaluminium section as approved, with allaccessories like powder-coated clips,transparent neoprene gasket, etc

Stonework on cills of walls

Anodized Aluminium framed Fixed Glass panels

Providing and laying 19mm thk MirrorPolished Black Granite stone slabs on cills asdirected on bedding of cement mortar (1:6)with cement float, filling joints with cementslurry and base pigment & grout to match,rubbing, all exposed & sharp edges to befinely chamfered & polished cutting in shapeas directed, cleaning, watering, laid to leveletc., complete.

3.6.

3.7.

3.8.

Width not more than 300 mm




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)


3.9.

LOCATION CODE NO DWG NO QTYABCDE


3.11.

LOCATION CODE NO DWG NO QTYABCD 93E

0

Unit Rate in Words:

Unit Rate in Words:

SQM 93

Steps Trade

s

SQM

Unit Rate in Words:

25

Staircase

MODULAR FALSE CEILLING

P&F fire escape staircase with treads in MSangle 35X35X5 and welded with weldmeshfitted in side rakers and one no.corner verticalof ISMC 200 MS, square tubes of 20X20 X 5for balusters 900 ht & 50mm dia for handrailon both sides as per dwg. Rates to include allmaterial, labour, tools and machinery forfabrication, transportation, chemical boltting toexisting wall surface grouting in concrete 1coat of red oxide & 2 coats approved oil paint.Rate also includes concrete bed in 1:3:6 PCC150 thk at base for fixing supports, levellingthe landing area with PCC, finishing &cleaning of site complete.

3.10.

Laminated wooden flooring3.11.1.P&F Superior quality 850kg / sqm; flooring of10 mm thk HDF planks with Laminated &embossed wood grain finish for Flooring, fireresistant, light to medium use including Subfloor Polythene & foam

600 X 600 Fine Fissured High NRC/High CAC1821M - with Beveled Tegular with Sillhoutteedge, Main Runner - 15mm x 44mm x3600mm Ceiling Suspension System, Gridsystem - Concealed T-system; Cross Tees -15mm x 44mm x 1200mm and 15mm x44mm x 600mm - Perimeter section ( shadowline wall angle) - 15mm x 15mm x 25mm x3000mm Lay -in Tile 600 x 600mm x 15mmMineral Fiberboard tile with virtually invisiblemicro perforations and finely granulatedsurface.Pin hole finish

Flooring




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)



LOCATION CODE NO DWG NO QTYA

B

C

D AD02 8

E

SQM 4.88

LOCATION CODE NO DWG NO QTYA 2.88BCD 2E

Unit Rate in Words:

NOS 8

RM 50

Unit Rate in Words:

Unit Rate in Words:

Dismanteling & removing existing doors &frames from Conference, Admin & accounts,Academic Room & stores - opening in theentrance lobby. Aluminium doors & Floorsprings to be handed over to the concernedauthority. Costs to also include labour & tools& machinery if needed, all leads, lifts, makinggood of damaged existing walls / surfaces withnecessary finishing. Site should be kept cleanfor work with no remains of any material.

Details-Toughen glass 8 mm in Aluminium frame

Dismantling aluminium doors

Superior quality skirting / end or thresholdprofile of prelaminated HDF of 100mm ht towall of matching shade & fixed with clip onmechanism including alignment & fitting,Rates for Flooring & skirting to includematerial & Labour, all tools tackles, etc. &cleaning of site complete

3.13.

3.12.

Skirting3.11.2

Fixed Glass for emergancy exit




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)


4.0.

LOCATION CODE NO DWG NO QTYAB AD17 61C AD17 34DE

LOCATION CODE NO DWG NO QTYA AD18 62B 350C AD18 145.41D P1-1,

P1.2,P4.2AD8, AD9A,D1

130.84

E P5.1, P5.2 AD9.2 39.4

4.2.

SQM

Unit Rate in Words:

Unit Rate in Words:

SQM 95

727.65

Full Height Partly Glazed Partition

All partitions 75mm thk (Full Ht 2450 andupto 2250) made of CALCIUM SILICATEacoustic boards with metal stud supportcomprising of a 55 mm stud of 0.55 mm thickand having two unequal flanges of 48 and 50mm each placed at 610 mm centre to centrein floor and ceiling channel with two equalflanges of 32 mm each fixed to floor andceiling at 600 mm centre, with the help ofnylon sleeves and wood screws. 8 mm thickCalcium Silicate Boards are then screw fixedby 25 mm long self-drilling and tapping screwshaving cross head with under head cutter, tothe studs and channels on both sides of theframe work. The board's joint are to bestaggered to avoid through passage.

Providing and fixing full height 10mm thkhermetically sealed toughened double glasspartition at edge of light duct. The doubleglass should be provided with Sealing framefinished at false ceiling and bottom supportlevel. Existing Gypsum False ceiling at edgeto be replaced by horizontal TW framedplywood panel finished in veneer ain visiblearea covering joint by 75mm and fixed firmlyto beam and slab above by TW members withbolts. Partition attached to the adjacent glassand partition junction with dorma or equivalentpatch fixtures Crystal polish provided at alledges. Rates include material, labour, toolsetc. complete

FURNITUREFull Height double Glass Partition4.1.




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)


LOCATION CODE NO DWG NO QTYA AD18 38BCDE


4.4.

SQM 0

Unit Rate in Words:

Unit Rate in Words:

Full height Acoustic Partition



SQM 38

Partitions Half Height

4.3.




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)


LOCATION CODE NO DWG NO QTYA 29.25B AD17 5.25C AD17 10.25DE

4.6.

SQM 65.75

LOCATION CODE NO DWG NO QTYAB D4 AD19 18.5C

D D1, D2AD8, AD9A,D1

41.85

E AD9.2 5.4SQM 32.4

LOCATION CODE NO DWG NO QTYA AD18 19.68B D4 AD19 6.4C 6.32DE

Unit Rate in Words:

Unit Rate in Words:

Unit Rate in Words:

SQM 44.75

WALL PANELLINGProviding & fixing panelling on wall with12mm marine ply on 25X25 mm seasonedteak battens covered with 4mm thk groupmatch veneer of approved shade and makelike green, Archid or equivalent as approved.6 mm Grooves to be defined between theveneers as indicated. Edges finished inmatching wood. Panelling also continued onwindow jambs & cills. Finishing in spraying oftwo coats of naturalcolour melamine polishafter surface preparatiion like rubbingsealcoat. Rates include material, tools, labour,hardware, finishing & cleaning complete.

Single Door

Double Door

Providing and fixing 35 mm Solid Core FlushDoors with 4mm thk veneer of approvedshade & make shall be provided on both sideof the door. Cut-out for glass as per design &fixing of 12mm glass with 12mm beading.Edges to be covered with 12mm BTCmembers as per design and finished inSealcoat, polish & 2 coats melamine polishincluding surface preparation with sandingrubbing & buffing. Rates shall includematerial, tools labour, all necessary hardwareor equivalent like heavy duty 4nos hinges, H-type 600mm long Handles & locks asapproved by the architect, with knobs on theinterior and Dorma or equivalent door closersfixed with SS screws & cleaning complete.

Self closing Doors

4.6.2.

4.6.1.

4.5.




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)


4.7.

SQM 45

LOCATION CODE NO DWG NO QTYABCD 42E 3



Cutting of existing Gypsum board false ceilingsuspended on GI framework to createopenings for approx every second or as reqdAluminium 50X50 vertical supports of partitionthat are to be fitted to the RCC slab withheavy duty alu cleats. Rates to include labour& tools & machinery, props, making good ofexisting surfaces with necessary materialboard, finishing paste,. removing and cartingaway all the debris. Initial preparations shouldinclude identifying any electrifical or telephonelines, AC piping or supports of ceiling.

Unit Rate in Words:

Unit Rate in Words:

Unit Rate in Words:

110

Accoustic Wall panellingProviding and fixing 30mm panelling with12mm thk marine ply base with 16mmAnutone Salon Slats PDS 160X2430 tovertical plastered surface finished as perdesign, covering all exposed edges with12mm thk.matching lipping patti finished withseal coat, matching polish & two melaminecoats and all cleaning complete

Cutting of existing Gypsum plaster board falseceiling suspended on GI framework to createopenings for approx every 3'-0" Aluminium50X50 vertical supports of partition that are tobe fitted to the RCC slab. Rates to includelabour & tools & machinery, props, makinggood of existing surfaces with necessarymaterial board, finishing paste,. removing andcarting away all the debris. Initial preparationsshould include identifying any electrifical ortelephone lines, AC piping or supports ofceiling.

4.7.2.

4.8.

4.7.1.




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)


LOCATION CODE NO DWG NO QTYAB 81CDE


4.11.

NOS 3

SQM 81

NOS 1

Unit Rate in Words:

Unit Rate in Words:

Rates include material, tools, labour,hardware, finishing & cleaning complete.

DISPLAY PARTITION 3900 X 1850 X H-750

Providing and fixing 850mm deep storagesupto directed & designed height as per thedrawing.All the external and internal membersare hollow box made using 12 mm thk ply withframing of 18 mm ply as per design. 4mmclear acrylic holders as per design to housenew edition covers to be provided with fixingon panel with curved lower end creating apocket.

All the external surfaces are covered with theveneer and the internal surfaces are coveredwith the veneer as per selection


WORKSTATION PARTITION 50mm Thk (1050 X 1150)

P & F of the 18mm thk wooden partitioncovered with the veneer as per selection

All T.W members and Veneer finished in mattmelamine polish and two coats of transparentpolyurethene coating

READING TABLE PARTITION (50 mm thk X300mm high)

4.9.

4.10.

Providing and fixing of partitions made ofmembers of hollow box made using 12 mmthk ply with framing of 18 mm ply as perdesign





LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)


LOCATION CODE NO DWG NO QTYAB D1 AD20 1CDE

LOCATION CODE NO DWG NO QTYA 2BCDE

2

Unit Rate in Words:

SQM

NOS 30

Unit Rate in Words:

12mm thk. Bent glass to be provided as perdesign with all exposed edges crystal polishedand supported by 12mm thk glass at center.



BOOK SHELF WITHOUT SHUTTERS 2X0.35X2.1

Providing and fixing 350mm deep storagesupto directed & designed height as per thedrawing.All the external and internal membersare hollow box made using 12 mm thk ply withframing of 18 mm ply as per design

35 mm thk Book shelves in 8mm thk ply boxwith framing of 18 mm ply as per designfinished with 1mm approved laminate. Ratesinclude material, tools, labour,hardware,finishing & cleaning complete.

Fixed glass 1400 X 2400 (Emergency Exit)

P & F Rack in 8mm box with 19mm Ply framefinished in 1 mm thk. Laminate of approvedmake and colour.Edges in 12 mm thk. T.Wlipping polished in matching colour of laminatefinished in Malamine



4.12.

4.13.




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)


LOCATION CODE NO DWG NO QTYAB BR 30CDE

LOCATION CODE NO DWG NO QTYAB D1 LIB2 1CDE


1NOS

Unit Rate in Words:

SQM 11

Unit Rate in Words:

Unit Rate in Words:

Providing and fixing 350mm deep storagesupto directed & designed height as per thedrawing.All the external surfaces are coveredwith the veneer as per selection and theinternal surfaces are covered with the white/laminate as per selection. The cabinets areprovided with the openable doors covered withthe veneer from outside and laminate white/asper selection and includes handles and allother accessories required.

A/V ROOM 350 DEEP MATERIAL STORAGE 4500 X 2250



4.14.

4.15.

NEW BOOKS DISPLAY 3200 X 700P & F Rack in 8mm box with 19mm Ply framefinished in 1 mm thk. Laminate of approvedmake and colour.Edges in 12 mm thk. T.Wlipping polished in matching colour of laminatefinished in Malamine12mm thk. Bent glass to be provided as perdesign with all exposed edges crystal polishedand supported by 12mm thk glass at center.All T.W members and Veneer finished in mattmelamine polish and two coats of transparentpolyurethene coating





LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)


LOCATION CODE NO DWG NO QTYAB S10 AD20 6.88CDE

LOCATION CODE NO DWG NO QTYAB JI AD20 6.88CDE

LOCATION CODE NO DWG NO QTYAB D2 AD20 2CDE

NOS

Unit Rate in Words:

2

Unit Rate in Words:

Unit Rate in Words:

SQM 6.88

SQM 6.88

4.17.

Newspaper & Periodicals Racks (500 wide) 1850 X 1000

Providing and fixing Rack, in 19mm thk.Plywood of approved make as per design,finished in 1 mm thk. Laminate of approvedmake and edges in 12 mm thk. T.W lippingpolished in matching colour of laminate.

Rates shall include all necessary hardwarelike hinges, locks and handles.



JOURNAL RACK 3700 X.1800

Storage using 18 mm thk ply with veneer asper selection on the external surface andwhite veneer on the internal surface. Mattfinish melamine polish

18mm thk plywood back finished with 1mmlaminate on both sides as per selection.All T.W members and Veneer finished in mattmelamine polish and two coats of transparentpolyurethene coating

FULL HEIGHT STORAGE IN THE SERVER ROOM 1.80 X0.45Storage using 18 mm thk ply with veneer asper selection on the external surface andwhite laminate on the internal surface. 12mmthk ply back finished with 1mm laminate onboth sides as per selection.

4.16.

4.18.




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)



LOCATION CODE NO DWG NO QTYAB T09,T9 AD19 3.7CDE

4.19.

NOS 1

3.7NOS

Unit Rate in Words:

Unit Rate in Words:

4.20.

Appended small table for assistant Top in plyframe & covered with 12 mm ply and supportsin 18mm ply as approved & as per designfinished in 1mm thk Laminate cabinets with openable / sliding doors behind18 mm thk ply door finished with 1mmLaminate on one side and white laminateinternally as per selection and approval

All T.W members - 35X12 BTC edge lipping inmatching wood as per vLaminate selectionfinished in 2 coats matt melamine polishRates include material, conveyance, tools,labour,handling, storage, hardware, finishing &cleaning complete.

ISSUE RETURN COUNTER ( 3700 mm X 1000 mm)Appended small table for assistant50mm plywood top made in 12 mm ply on 18mm ply frame finished with 1mm thk laminateas per design and approval including keyboard trays & cable managers to match Front in 2 layers 8mm thk flexi ply withinternal supports of 18 mm ply framing as perdesign to support table top finished withlaminate 35X12 BTC edge lipping in matching wood as per Laminate selection finished in 2coats matt melamine polish

Photo-copy machine base Unit 700 X 1500X H 750Providing and fixing Unit for supporting photocopy machine, in 18 mm thk. Plywood ofapproved make as per design, finished in1mm thk. Laminate as per Architect'sselection & edges in 12mm thk BTC lippingpolished in matching colour of laminate.

Unit to house drawers as indicated finishedinternally and externally in 1mm thk. egg white laminate of approved BRANDS.




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)


LOCATION CODE NO DWG NO QTYA 2B T2 AD19 1CDE

LOCATION CODE NO DWG NO QTYA 0.63B S11 AD19 0.75CDE

4.23.

NOS 1.38

3

1.58

Unit Rate in Words:

Unit Rate in Words:

SQM

NOS


4.21. Table & Work top (2100 X 750)

Table to be provided with 1 nos fibre mouldedkeyboard trays.Drawers with 12mm thk ply with veneer as perselection on the external surface and 1mm thkwhite veneer on the inner surface with lockingmechanism, sliding tracks, etc.

All T.W members finished in matching mattmelamine polish

Back runner (2100X400XHt 750)

Providing and manufacturing top in 18 mm thkply including 4mm thick veneer as perselection Table to be provided with fibre mouldedkeyboard tray.

Drawer with 12mm thk ply with veneer as perselection on the external surface and 1mm thkwhite veneer on the inner surface with lockingmechanism, sliding tracks, etc.12 mm thick ply cabinet with sliding doors withveneer as per selection on the externalsurface and 1mm thk white veneer on theinner surface

Providing and manufacturing table in 18 mmthk ply with 1mm thick Laminate as perselection


Providing and manufacturing table in 18 mmthk ply with 1mm thick Laminate as perselection

Side Storage (950 X 450 X Ht750)4.22.




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)


LOCATION CODE NO DWG NO QTYAB S12 AD19 1.58CDE

LOCATION CODE NO DWG NO QTYAB 1.12CDE


SQM 1.5

Unit Rate in Words:

SQM 1.12

Unit Rate in Words:

Unit Rate in Words:

All T.W members finished in matt melamine polish two coats of natural coatingRates include material, tools, labour, hardware, finishing & cleaning complete.

Off Line Computer Tables 950 X 500 X H-750

Providing and manufacturing table in 18 mmthk ply including 1mm thicklam as perselection

4.24.

4.25.

Table to be provided with fibre mouldedkeyboard tray, underdesk fibre moulded CPUholder and cable manager etc


All T.W members finished in matt melaminepolish two coats of natural coating

Round Discussion Table 750 dia

Providing and manufacturing table in 18 mm thk ply including 1mm thicklam as per selection




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)


LOCATION CODE NO DWG NO QTYAB T3 AD19 3.6CDE

SQM 3.6

NOS 3

Unit Rate in Words:

4.26.

Below table storage unit 500mm wide as indrawing to be of 18mm thk ply & veneer finishas per designer's selection with top having35mm thk half-round BTC profile. All internalshelves shall be finished in 1mm thk egg white laminate and edges in 6mm thk. T.W lippingpolished in natural colour

Side runner 450mm wide as in drawingin18mm ply & 4mm veneer finish as perdesigner's selection with top having 35mm thkhalf-round BTC profile. All internal shelvesshall be finished in 1mm thk egg whitelaminate and edges in 12mm thk. T.W lippingpolished in natural colour

Table to be provided with Fibre mouldedkeyboard tray, CPU trolley and cable manageretc complete. Rates include material, tools,labour, hardware of HAFELE make asapproved & miscellaneous hardware items.single key locking system to all storage units,finishing & cleaning

Drawers with 12mm thk ply with laminate asper selection on the external surface and 1mmthk white/as per selection veneer on the innersurface with locking mechanism, slidingtracks, etc.

All T.W members finished in matt melaminepolish and two coats of transparent melaminecoating

C.O.A., Accts officer & Dean table 2100x750 with 450 wide side runner Worktop 750 mm wide as in drawing to be of19mm thk plywood & 4mm veneer with 35mmedge in full round BTC finished in natural clearpolish & 2 coats of melamine table top to befinished in 2 coats of clear matt finishPolyurethane

4.27.

Providing and manufacturing table in 18 mmthk ply including 1mm thick laminate as perselection

STAFF WORKSTATION 1200n600nHt 750

Table to be provided with fibre mouldedkeyboard tray.




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)


LOCATION CODE NO DWG NO QTYABCD T2 AD3 3E

LOCATION CODE NO DWG NO QTYABCD T3 AD4 5E T3 AD8 2

1

Unit Rate in Words:

Unit Rate in Words:

SQM 7

NOS

All T.W members & Veneer finished in highquality polish & two coats of transparentmelamine coating

Fabricating in 3 parts and fixing conferencetable in 19mm thk ply in veneer finish as perdesigner's selection with 50mm edge profile in12X50mm thk BTC. with 4mm "V" groove incentre of edging. Lipping rounded by 10mm.Base structure to be in Teakwood sectionframing & finished in sealcoat, clear polish & 2coats of melamine fivish & Top with 2 coats ofPolyurethane finish as per design.

Provision to be made for the table to haveelectrical & Data connectivity at edge asshown for each seat with arrangements formicrophone & provision be made inconjunction with electrical contractor to runconduits through the supports as needed to bequoted separately

21 seater Meeting Table

Providing and manufacturing tables in 19 mmthk ply of approved make & 4mm veneer with35mm edge in full round BTC finished innatural clear polish & 2 coats of melamine asper designer's selection on vertical &horizontal edges as per design Rates includematerial, tools, labour,hardware like handles,locks, finishing & cleaning complete.

Officer Tables 700 Wide -1800X750 with side unit

Table to be provided with Fibre mouldedkeyboard tray, CPU trolley and cable manager

Conference Table 6618mm x 1750mm4.29.

4.28.




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)



LOCATION CODE NO DWG NO QTYABCD T10 AD4E 1

4.31.

4.30.

NOS 1

Work Stations and Patitions

Unit Rate in Words:

Unit Rate in Words:

The table to have electrical & Dataconnectivity at edge as shown & provision tobe made in conjunction with electricalcontractor for running conduits through thesupports as needed

Conference Table Size :2400mm x 950mm

Work Stations 1500 X 1500 with partition 1070 ht.

Fabricating fixing conference table in 19mmthk ply in veneer finish as per designer'sselection with 35mm edge profile in 12X35mmthk BTC. With rounding of. Lipping by 10mmAll T.W members & Veneer finished in highquality polish & two coats of melamine coatingTable tops to be finished in 2 coats Matt PUC

Base structure to be in Teakwood sectionframing & finished in seasoned, clear polish &2 coats of melamine coating as per design.

Worktop 500mm wide as in drawing to be of19mm thk ply and laminate finish as perdesigner's selection with 18mm Particle boardtop in one piece of 1500X1500 with matchingPVC lipping edge / end profile. Rate shall beinclusive of all necessary fittings like hinges,locks, ball catches, handles of approveddesign and miscellaneous hardwareitems.Table to be provided with Fibre mouldedkeyboard tray,and cable manager, Metal CPUswivel stand.

4.31.1.

NOS 46




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)


LOCATION CODE NO DWG NO QTYABCD T6 AD4 32E T6 AD4 14


LOCATION CODE NO DWG NO QTYABCD T8 AD4 2.25E

4.32

SQM 139

Unit Rate in Words:

SQM 2.25

Unit Rate in Words:

Unit Rate in Words:

4.31.2. Partition to be 50mm thk x 1050mm high, in30x50mm CP teak members with 8mm ply &1.5mm Laminate on both sides, with minimum2 10mm wide raceway cable managementtrays

Provision in conjunction with electricalcontractor for running conduits or racewaysthrough the partitions.if & where neededduring installation on site

Assistant to COA (1500mm X 500mm)Worktop 500mm wide as in drawing to be of19mm thk ply & laminate finish as perdesigner's selection with matching PVC lipping edge / end profile. All internal surfaces shallbe finished in 1mm thk laminate of approvedmake Rate shall be inclusive of all necessaryfittings like hinges, locks, ball catches,handles of approved design andmiscellaneous hardware items.Table to beprovided with Fibre moulded keyboardtray,and cable manager, Metal CPU trolley/stand Drawer pedestal to be 450mm wide withsimultaneous locking mechanism for alldrawers. All internal surfaces shall be finishedin 1mm thk laminate of approved make andedges in 12mm thk. T.W lipping polished inmatching colour of laminate.

Drawer pedestal to be 450mm wide withsimultaneous locking mechanism for alldrawers. All internal surfaces shall be finishedin 1mm thk laminate of approved make andedges in 12mm thk. T.W lipping polished inmatching colour of laminate.




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)



4.34.

LOCATION CODE NO DWG NO QTYABCD S4 AD3 3.5E

NOS

SQM 3.5

Unit Rate in Words:

10

Unit Rate in Words:

4.34.1.

4.33.

Partition to be 50mm thk x 1070mm high, in30x50mm CP teak members with 8mm ply &1.5mm Laminate on both sides, with minimum2 10mm wide raceway cable managementtrays

Storage behind COA (S3+S4) Accounts officer & Dean (S3)Providing and fixing 350mm deep DisplayRack above 1150 mm upto2800 level, in19mm thk ply of approved make & approvalas per design, finished in 1mm thk laminate ofapproved colour & make and edges in 12mmthk. lipping polished iwood of veneer.Providing 12mm thik glass shelves withcrystal edge polish -3 nos as per dwgsupported on 4 no Satin steel finished brass D-brackets as approved by architect & provisionof light points in top panelled pelmet as perdwg.

Worktop 500mm wide as in drawing to be of19mm thk ply and laminate finish as perdesigner's selection with matching PVC lipping edge / end profile. Rate shall be inclusive ofall necessary fittings like hinges, locks, ballcatches, handles of approved design andmiscellaneous hardware items.Table to beprovided with Fibre moulded keyboardtray,and cable manager, Metal CPU swivelstand . Table to be provided with cablemanager, Metal CPU trolley . Drawer pedestalto be 450mm wide with simultaneous lockingmechanism for all drawers. All internalsurfaces shall be finished in 1mm thk laminateof approved make and edges in 12mm thk.T.W lipping polished in matching colour oflaminate.

500 X 1000 Work runner with 50thk partition 1070 ht.

STORAGES




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)




Unit Rate in Words:

4.4SQM

SQM 3.5

Unit Rate in Words:

4.34.2. Providing Storage upto 700mm above FFLwith 2 nos openable shutters & 4 drawers inone module in 19mm ply with 1mm thklaminate of approved colour & make andedges in 12mm thk. lipping polished iwood ofveneer. & 19mmply selves finished in 1mmthk egg white laminate & BTC lipping

Finishing in Sealcoat, polish & 2 coatsmelamine polish including surface preparationwith sanding rubbing & buffing. Rates shallinclude material, tools labour, all necessaryhardware or equivalent like heavy duty 4noshinges, H-type 600mm long Handles & locksas approved by the architect, with knobs onthe interior and Dorma or equivalent doorclosers fixed with SS screws & cleaningcomplete.

Providing and fixing 350mm deep file Rackin 19mm thk ply of approved make design &500mm deep enclosure to house the Safedeposit vault 450X450X750 with lockableshutters finished in 1mm thk laminate ofapproved colour & make and edges in lippingpolished . Providing 19mm thik Ply shelveswith 1imm thk white laminate -as per dwg asapproved by architect & All exposed edges ofplywood to have 1"X1/4" BTC lipping finishedin polish matching laminate. Rate shall beinclusive of all necessary fittings like springloaded genuine hinges, 100mm brush steelfinish brass handles ball catch, locks, &miscellaneous hardware items as approved &all finishing & cleaning complete.

Storage behind Cashier 1250 X 28004.34.3.




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)


LOCATION CODE NO DWG NO QTYAB T5 AD20 1CDE

LOCATION CODE NO DWG NO QTYA 2B T1 6CDE

Unit Rate in Words:

NOS

NOS 8

1

Unit Rate in Words:

4.35.

4.36.

Table to be provided with fibre mouldedkeyboard tray, underdesk fibre moulded CPUholder and cable manager etc

All T.W members finished in matt melaminepolish two coats of natural coatingRates include material, tools, labour,hardware, finishing & cleaning complete.

GENERAL READING TABLE 2000 X850 X H-750Providing and manufacturing table in 18 mmthk ply including 4mm thick veneer as perselection

100mmx100mm box Legs in 18mm plyfinished with 1mm Laminate as selectedCorners with matching wood 8 X 8mmfinished in 2 coats of melamine polish

All T.W members finished in natural polishand two coats of transperant melaminecoating

Rates include material, tools, labour, hardwareof like handles, locks, finishing & cleaningcomplete.

BROWSING TABLE 950 X 500 X H-750

Providing and manufacturing table in 18 mmthk ply including 1mm thicklam as perselection

Providing and manufacturing table in 18 mmply with front edge thickened to 36mm upto75mm depth including vertical supportsinternally finished in 1mm white laminate andfinished in approved Laminate as per design.

WORK TABLE IN SERVER ROOM 1.80 X 0.6

4.37.

NOS 2





LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)





NOS 2

4.39.

Providing and manufacturing table in 18 mmthk ply including 1mm thicklam as perselection All T.W members finished in matt melaminepolish two coats of natural coating

4.38.

NOS 6

Unit Rate in Words:

Unit Rate in Words:

Unit Rate in Words:


construction of a concrete column with theplaster finish of the size 400mm x 400mm inthe center.

GARDEN TABLE 1 DIA

fixing of the 1m dia kadappa on the top as atable top with finishing and polishing

fixing of tiles on top of kadappa to avoidcracking due to heat with finishing andpolishing.Rates include material, tools, labour,hardware, finishing & cleaning complete.


READING TABLES 1050 X 500 X H-750Table top of 12mm Ply on framing of 18mmply with 1mm wenge wood Laminate as perselection & TW edge covering laminatefinished in wood with 2 coats matchingmelamine polish

100mmx100mm box Legs in 18mm plyfinished with 1mm Laminate as selectedCorners with matching wood 8 X 8mmfinished in 2 coats of melamine polishAll T.W members for corners, edges, handlesand grooves finished in matt melamine polishmatching laminate and two coats of matchingmelamine polish





LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)



LOCATION CODE NO DWG NO QTYAB ST1 AD20 2CDE

LOCATION CODE NO DWG NO QTYABC T4 AD20 6DE

NOS 6

Unit Rate in Words:

Unit Rate in Words:

Unit Rate in Words:

2NOS

2RM

4.40.

4.41.

4.42.

All T.W members for edges & Veneer finished in natural polish and coated with 2 coats of Melamine

Seating with backrest

Work Tables 1500 X 500 X H750Worktop 500mm wide as in drawing to be of18mm thk WP ply and laminate finish as perdesigner's selection with a single drawer &matching PVC lipping edge / end profile. Rateshall be inclusive of all necessary fittings likehinges, locks, ball catches, handles ofapproved design and miscellaneous hardwareitems.Table to be provided with Fibre mouldedkeyboard tray,and cable manager, Metal CPUswivel stand.

WHITE BOARD 1000 X 800providing and fixing of the white boardincluding the miscellaneous fixtures

Providing & fixing 750mm wide seating atspecified location in 18mm ply box supportscovered with 4mm thk Veneer . Seating in75mm cushion of 50mm HD foam and 25mmof MD foam covered with MAnjarpat & cloth(Rate Rs. 500 per m) T.W. member roundedat top & bottom fixed as facia 25X 100 mm.Finishing to be iin natural polish with 2 coatsof melamine coat. Back rest provided in18mm tapered ply supports coveredwith12mm ply and finished in wood Veneer asper drawing and approval. Edge finished in fullrounded T.W member for entire length of backrest.




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)


LOCATION CODE NO DWG NO QTYABC 4DE


SQM 6

Unit Rate in Words:

SQM 4

Unit Rate in Words:

4.43.

4.44. Over Head storages 1500 X 350 X 1450

Providing and fixing 350mm deep storagesupto directed & designed height in 18mm thkply shutters as per drg. All the externalsurfaces including exposed surfaces of plyshall be finished with 1 mm thk Laminate ofapproved make.All Internal supports, shelvesand shutters to be in 18mm thk ply finished in1 mm Base white / Egg white Laminate . Allexposed edges of plywood to have 1"X1/4"BTC lipping finished in polish matchinglaminate. Rate shall be inclusive of allnecessary fittings like spring loaded HAFELEhinges, 100mm brush steel finish brasshandles ball catch, locks, & misc hware itemsas approved & all finishing cleaning complete

Worktables for Offline computers 1050 X 600 X 750Worktop 600mm wide as in drawing to be of18mm WP ply and laminate finish as perdesigner's selection with a single drawer &matching PVC lipping edge / end profile. Rateshall be inclusive of all necessary fittings likehinges, locks, ball catches, handles ofapproved design and miscellaneous hardwareitems.Table to be provided with Fibre mouldedkeyboard tray,and cable manager, Metal CPUswivel stand




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)




B S1 AD20 4

C

D S1 AD10 114

E S1 AD10 27

145

SQM 6

Unit Rate in Words:

Unit Rate in Words:

NOS

4.45.

4.46.

File Storages 2250 X 350 X 2800

Providing and fixing 350mm deep storages upto directed & designed height in 18mm thk plyshutters as per drg. All the external surfacesincluding exposed surfaces of ply shall befinished with 1 mm thk Laminate of approvedmake. All Internal supports, shelves andshutters to be in 18mm thk ply finished in 1mm Base white / Egg white Laminate . Allexposed edges of plywood to have 1"X1/4"BTC lipping finished in polish matchinglaminate. Rate shall be inclusive of allnecessary fittings like spring loaded HAFELEhinges, 100mm brush steel finish brasshandles ball catch, locks, & misc hardwareitems as approved & all finishing cleaningcomplete

Modular File storages 855 X 775

Providing and fixing 350mm deep storagesupto directed & designed height in 18mm thkply shutters as per drg. All the externalsurfaces including exposed surfaces of plyshall be finished with 1.5 mm thk Laminate ofapproved make.All Internal supports, shelvesand shutters to be in 18mm thk ply finished in1 mm Base white / Egg white (GreenLam)Laminate . All exposed edges of plywood tohave 1"X1/4" BTC lipping finished in polishmatching laminate. Rate shall be inclusive ofall necessary fittings like spring loadedhinges, 100mm brush steel finish brasshandles ball catch, locks, & miscellaneoushardware items as approved & all finishing &cleaning complete.




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)


LOCATION CODE NO DWG NO QTYAB S2 LIB2 4CD S2 AD10 18E S2 AD10 13


B

C

D S5 AD7 4.3

E

Unit Rate in Words:

SQM

35NOS

4.3

Unit Rate in Words:

4.48.

4.47. File storages 1275 X 775 - Overhead.

Providing and fixing 350mm deep storagesupto directed & designed height in 18/19mmthk ply shutters as per drg. All the externalsurfaces including exposed surfaces of plyshall be finished with 1.5 mm thk Laminate ofapproved make.All Internal supports, shelvesand shutters to be in 18mm thk ply finished in1 mm Base white / Egg white Laminate . Allexposed edges of plywood to have 1"X1/4"BTC lipping finished in polish matchinglaminate. Rate shall be inclusive of allnecessary fittings like hinges, ball catch,locks, & miscellaneous hardware items ofapproved design

Pigeon Hole Storage in Reprographic Room 2000 X 2150Providing and fixing 350mm deep Pigeon holeRack above 800 mm upto2150 level, in 19mmthk ply of approved make & approval as perdesign, finished in 1.5mm thk laminate ofapproved colour & make

Providing Storage upto 800mm above FFLwith openable shutters and a set of Drawers in19mm ply with 1.5mm thk laminate ofapproved colour & make and edges in 12mmthk. lipping polished iwood matching thelaminate, top edge in profile as per design. &19mmply selves finished in 1mm thk eggwhite laminate & BTC lipping

Finishing in polish including surfacepreparation with sanding rubbing & buffing.Rates shall include material, tools labour, allnecessary hardware or equivalent likecabinets hinges, & locks as approved by thearchitect, fixed with SS screws & cleaningcomplete.




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)


SQM 19.88

LOCATION CODE NO DWG NO QTYA 19.88

B

C

D

E

SQM 9.72

LOCATION CODE NO DWG NO QTYA 9.72

B

C

D

E

Stage (Rostrum): Providing and fixing 200mm high stage in 18mm thk marine ply framegrid with 12mm TW lipping at bottom edge @600mm c/c in both directions with 12mmmarine ply fixed on top finished internally withtwo coats of white oil paint and top andexposed verticals fitted with approved PVCflooring with adhesive as per manufacturer'sspecifications, over one coat of primer afterthoroughly brushing the surfaces free fromforeign matter, filling cracks & preparing thesurface, all unevenness to be levelledapplying putty including filling up anyundulations and sand papering,etcandcleaning complete.

Unit Rate in Words:

Unit Rate in Words:

Podium: Providing & fixing 750mm wideX1300 Rostrum as per drawing to be of 50mmthk plywood and 1mm laminate finish as perdesigner's selection with provision of ledge forplacing papers & fixing of microphone etc in12mm ply with edge of 12thk TW lippingbullnose end profile supported by MS powdercoated brackets. All internal areas in 19mmply shall be finished top in1mm laminate ofapproved make with 12mm thk. T.W lippingedges polish to match laminate. Provision ofelectrification and data connectivity. Ratesinclude material, tools, labour,hardware ofapproved make and finishing & cleaningcomplete.

4.50.

4.49.




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)


5.0.



NOS 1LOCATION CODE NO DWG NO QTY

ABC 1DE

7.0.

RM

3

Unit Rate in Words:

5

Unit Rate in Words:

Unit Rate in Words:

8

NOS

NOS

Unit Rate in Words:

High back Executive chair with Head Rest synchronized tilting mechanism with single locking systems, Mesh back with lumber support and height Adjustable PU arm pad, pneumatic gas lift for height adjustment, imported Nylon base with castors. Dual layered PU foam cushion seat material-fabric of approved colour.Seat size- 21”WX17”DSeat height- 22”W X 30” H, Overall dimensions- 22”W X18”DX45”-47”H.

7.1.

Additional if required for 5.1.

6.0.

5.1.

5.2.

Supply, installation, testing andcommissioning of 1.5 TR Hi wall Split AirConditioner, 5 star rated with standardinstallation charges and wall brackets, withstandard copper, cabling and drain piping upto5 RMT. Complete.

Split Air Conditioners

Heavy duty copper piping

Shoe Rack 1200X 1200 X 350

CHAIRS

Executive Chairs: (Refer as per CH1)

Power cabling from indoor to outdoor unit Drain piping with hard PVC pipe forcondensate water




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)


Executive training room chairs in prime quality ERW powder coated tube supports and high density foam seat back with folding writing tablet in laminated ply. Upholstered in high quality fabric as approved by Architect.Seat size- 21”WX18”DSeat height- 22”W X 25” H, Overall dimensions-22”WX22”DX33”H.

Unit Rate in Words:

NOS 86

NOS

Medium back Executive chair with synchronized tilting mechanism with single locking position of mesh back with lumber support and height Adjustable PU arm pad, pneumatic gas lift for height adjustment, imported Nylon base with castors. Dual layered PU foam cushion seat material-fabric of approved colour.Seat size- 21”WX17”DSeat height- 22”W X 25” H, Overall dimensions- 22”W X 18”DX41”-44”H.

NOS 51

Unit Rate in Words:

Unit Rate in Words:

40

7.2.

7.3.

AV Room Chairs: (Refer as per CH4)

Non- executive Chairs: (Refer as per CH2)

7.4.

Visitors/Library Chairs/ Discussion room: (Refer as per CH3)Medium back Executive chair with synchronized tilting mechanism with single locking position of mesh back with height PU arm pad, pneumatic gas lift for height adjustment, imported Nylon base with castors. Dual layered PU foam cushion seat material-fabric of approved colour.Seat size- 21”WX17”DSeat height- 22”W X 25” H, Overall dimensions-22”WX18”DX41”-44”H.




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)


Revolving stool/Chair with adjustable seat height & foot rest in prime quality ERW powder coated tube supports and high density foam seat and back in pipe covered with ≥100mm rubber covered with foam and upholstered in synthetic leather in colour as approved by Architect/consultant.Overall Size : H-32”-34” x W-18” x D-18”

Unit Rate in Words:

7.8. Garden Chair:(Refer as per CH7)NOS 12

NOS 12

Garden chair with gas injection molded plastic legs and primary seat and back in molded Polyurethane (PUR and PU) in approved colour by Architect.Overall dimensions-19”WX21”DX 32”H

Executive chair with P type handle, tilting & revolving, Seat Height adjustable by Pneumatic gas lift, Chromium plate base.Seat size- 21”WX17”DSeat height- 22”W X 30” H, Overall dimensions-22”WX18”DX45”-47”H.

Unit Rate in Words:

Unit Rate in Words:

Providing & fixing in position, heavy duty fully upholstered chairs at 535mm c to c tip-up type with Powder Coated Heavy duty MS Stand mounted with required number of 12 mm x 100 mm Anchor fasteners, with Individually moulded , ergonomically designed seat of molded PU Foam Cushion manufactured in certified ISO 9001 facility to ensure consistency in density for longevity of density > 55 ±5% kgs/cu.mtr having thickness not less than 75 mm and back cushion of Uniblock Integrally molded Polyurethane Foam cushion of density >55 ±5% kgs/cu.mtr min 90 mm thick at the base tapering to not less than 55 mm at top, fully upholstered, offering enhanced acoustic absorption properties having molded plastic cover from rear, in Foam laminated stretch sandwich Fabric for clean finish and soft comfortable feel as per the color & pattern as selected & approved by the architect & client, as per specifications given . Wooden armrest 65mm x 30mm - 330mm long with housing writing tablet and finished in melamine polish.

Unit Rate in Words:

7.6. Board room and meeting room chairs:(Refer as per CH6)

NOS 45

NOS 81

7.7. Lab Stool/Chairs:(Refer as per CH7)

7.5. Seminar Hall Chairs: (Refer as per CH5)




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)


NOS 1


8.0.

LOCATION CODE NO DWG NO QTYA 32B 32CD 41E 15


Unit Rate in Words:

Unit Rate in Words:

SQM 120

Unit Rate in Words:

SQM 354

Mounting: Pocket mounted. (pocket to beprovided by other agency)Shade Orientation: Regular roll, shade clothfalls at window side of roller

Providing & fixing in position roller blinds ofapproved make or & as directed of varyinglength, approved fabric with heavy dutyfittings, rollers, by nylon cords and handlesincluding necessary fittings and fixtures (approved colour & shade ) etc.complete.

7.9. Three Seater sofa

Configuration: Single band

Operation: - Manual. Offset side-mountedchain operated

Vertical BlindsBLINDS

Providing & fixing in position vertical blinds ofapproved make or & as directed of varyinglength, approved fabric with heavy dutyanodised aluminium fittings, nylon rollers,tiling blinds with stainless steel chain andstacking of blinds by nylon cords and handlesincluding necessary fittings and fixtures (approved colour & shade ) etc.complete.

Fabric shade as approved, sunscreen, densebasket weave 5% openness factor

8.1.

8.2.

75mm closure with up-stand along the length of the dry pocket, removable type for servicing shades

Roller Blinds




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)


LOCATION CODE NO DWG NO QTYABCD AD1 4.32E 2


SQM 40

LOCATION CODE NO DWG NO QTYA 40BCDE

NOS 1


13.0.

13.1.

SQM 88.35

LOCATION CODE NO DWG NO QTYAB 58.35C 30DE

Soft Board

Sink and Stainless steel platform

Providing and fixing pin board with approvedcloth in specified areas above back storageconsisting of 12mm pinup board fixed on12mm ply and edges in 12mm thk. T.Wlipping polished including material,labour,hardware finishing & cleaningcomplete.

12.0.

13.1.1.

SQM

Unit Rate in Words:

Unit Rate in Words:

Unit Rate in Words:

Unit Rate in Words:

Unit Rate in Words:

SQM 6.32

3

10.0.

White Board9.0.

Civil work and Hardscape

11.0. Film

LANDSCAPE

Providing and fixing white board in specifiedareas consisting of 1.0mm white boardLaminate fixed on 19mm ply and edges in12mm thk. T.W lipping polished in matchingcolour of laminate. Rates include material,tools, labour,hardware of finishing & cleaningcomplete.

Providing and laying brick bat coba (150mmdeep)of specified thickness in 1:2:4 limeconcrete over the specified areas includingrubbing and cleaning the base giving properslope compacting and curing complete.




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)


SQM 45.65


CU.M 1.5

LOCATION CODE NO DWG NO QTYAB 0.6C 0.9DE

CU.M 4.91


CU.M 0.45


Unit Rate in Words:

Supplying & Spreading average 6mm-20mmtrap/ granite/ quartzite/ gneiss stone metal atthe road side including conveying andstacking for use as directed by the Engineer-in-charge. (CRUSHED METAL)

Providing and laying in situ cement concreteM-10 / 1:3:6 of trap / granite / quartzite /gneiss metal for foundation ( PCC for kerbhaunching) including bailing-out watermanually formwork, compacting, coveringnewly laid concrete by gunny bag, plastic ortarpaulin, curing etc. complete. (Woodenplanks / shuttering will not be allowed) Spec.No. : Bd.E.1 Page No. 287 / IS 456:2000

Unit Rate in Words:

Unit Rate in Words:

Unit Rate in Words:

13.1.5.

13.1.3.

13.1.4.

Providing and laying brick bat filling (100mmdeep) of specified thickness in 1:2:4 limeconcrete over the specified areas includingrubbing and cleaning the base giving properslope compacting and curing complete.

Providing Brick masonry in cement mortar 1:6using Second class burnt bricks in foundationsand plinth of inner walls / in plinth of externalwalls including bailing-out water manually,striking joints on unexposed faces, raking outjoints on exposed faces and wateringcomplete. (BBM below paving and steping stone)

13.1.2.




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)


SQM 3.11


SQM 26.62


13.2.

SQM 0

LOCATION CODE NO DWG NO QTY

A

B

C

D

E

Civil work and Softscape

Unit Rate in Words:

13.1.6.

Providing & Fixing Antique Finish cotta Stoneor as directed of best quality to Dado / Skirting/ Cladding of approved colour & feature&20/25mm thick or in specified thickness inrequired position with ready made adhesivemortar of approved quality including jointfilling with coloured cement slurry, cleaning,curing etc. compelete. Sp.No.: As directed byEngineer-in-charge.

13.1.7.

Unit Rate in Words:

Unit Rate in Words:

Providing and laying in required positionskerbs / skirting or dado of polished Tandurstone slab 25mm to 30mm thick or inspecified thickness and of required width on1:4 cement plaster / 1:2 lime plaster includingcement float, filling joints with cement slurry,curing, rubbing, polishing and cleaningcomplete.

Cleaning entire plantation area, checking forsurface water drainage, laying polypropelyndrainboards and fixing of geotextil fabric on toit.Laying a thin layer of fine sand approx, 7-10mm over geotextile fabric.Dumping ofspecially prepared LIGHT WEIGHTPLANTING MIXTURE over sand to a depth of10", spreading it evenly, rolling, dressing itwith extra soil to remove undulations if anyand plantation of specified type of Lawn(Korean Carpet)

13.2.1.




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)


13.2.2.

SQM 5


A

B

C 5

D

E

NOS 29


NOS 2


CU.M 7.38


Unit Rate in Words:

Unit Rate in Words:

Unit Rate in Words:

Unit Rate in Words:

Cleaning entire plantation area, checking forsurface water drainage, laying polypropelyndrainboards and fixing of geotextile fabric onto drainboards and sides of planter wall so asto avoid planting mixture from going on toterrace.Laying a thin layer of fine sand approx, 7-10mm over geotextile fabric.Dumping ofspecially prepared LIGHT WEIGHTPLANTING MIXTURE over sand to a depth of2'6" and plantation of specified plants.Laying adrip line along all shrub beds. (considerng soildepth 700mm)

Loose Planter of 450X1200mm of YUCCABEPLANTERS with Yuccabe Pleasant White Finish

Loose Planter of 750mm dia of YUCCABEPLANTERS with Yuccabe Pleasant WhiteFinish

Providing & supplying sweet soil for filling inplantation areas as per the directions of theLandscape Consultant & Engineer-in-charge.(only for loose planter box )

13.2.3.

13.2.4.

13.2.5.




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)


NOS 4


AB 2C 2DE

NOS 150



SQM 2.1Signage: Providing and fixing of signage printed on PVC Vinyle material including installation with screwing as size and colour approval by Architect.

Artificial Plants:

TOTAL AMOUNT- I (Rs.)

Unit Rate in Words:

14.0.

Unit Rate in Words:

Unit Rate in Words:

14.0.

Unit Rate in Words:

Small Trees 13.2.6.

13.2.7. Shrubs




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)


II

1.0

ELECTRICAL WIRING INTERNAL

Unit Rate in Words:2.16/20 A SP MCB,10kA : 10 Nos. (G.F WS)

8 Way VTPN DB double door for Ground FloorIncoming :- 1.63A TPN MCB,10 KA -1 no.2. 4P,15KA,TYPE 2 Surge Arrestor :- 1 No.Outgoing : - 1.40 A TP MCB , 10 KA : 2 Sets (1st floor + Spare)

No.

Main UPS VTPN DB (Loc : UPS Room) - Ground floor

1

1.40A TPN MCB,10 KA -1 no.

Sub incomer :-

1.2.

Fabricated main UPS VTPN DB (Loc : UPSRoom) with RYB Indication

No. 1

4 Way VTPN MCB DB double door.

Incoming :-

2.25 2P ELCB, 100mA : 3 nos.

1.63A TPN MCB,10 KA -1 no.

2.4P ,15KA,TYPE 2 SURGE ARRESTOR:- 1 NO.

UPS SUB DB for Basement Floor & (For WS)

No. 2

4 way TPN MCB DB double door

Outgoing :- 1. 16/20 A SP MCB,10kA : 12 Nos.

DISTRIBUTION BOARDS (UPS)-Supply, Installation, Testing &commissioning of concealed Double Door,IP43 MCB/MCCB DB complete withinterconnecting links, earth & neutralbar,proper copper lugs and ferruelingrequired for any circuiting etc.

UPS SUB DB for Ground Floor (For WS)

No. 1

6 way TPN MCB DB double doorIncoming :- 1.40A TPN MCB,10 KA -1 no.Sub incomer :-

1.1.

1.4.

Outgoing :- 1. 16/20 A SP MCB,10kA : 18 Nos.

1.3.

Incoming :-

2.25 2P ELCB, 100mA : 3 Set

Unit Rate in Words:Outgoing :- 1.40 A TP MCB , 10 KA : 2 SETS + 2 SPARES

Unit Rate in Words:

Unit Rate in Words:




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)


Nos. 9

Nos. 9

1. 16/20 A SP MCB,10kA : 21 Nos.

All sample boxes with accessories / fixtures shall be got approved Brands only.

Connections shall be done with crimped type tinned copper lugs and washers. All switches shall be Modular Type.25 /32 mm dia PVC, MMS catagory with ISI mark.

No. 1

8 way TPN DB double door (Phase segregated DB )Incoming :-1.80A TPN MCCB,16 KA -1 no.Sub incoming :- 1.40A DP ELCB, 100mA -3 no.Outgoing :-

Unit Rate in Words:

Unit Rate in Words:

Unit Rate in Words:

1.5.

POINT WIRING (S.B Alration work):Point wiring for Light fittings & Switchboard altration works for light points With1.1 KV grade FRLS PVC insulatedmultithreaded copper conductor wires, in35X35mm PVC Trunking/ Casing Caping /25/32 mm dia PVC conduits , with allaccessories, exposed in Slap/celling / wallor on G.I. spacers fixed with no.10 nettlefold wood screws with nylon plugcomplete with all conduit accessories G.Isaddles and MS switch boxes, factory builtsuitable for modular type switchaccessories including 1.00 / 1.5 sq.mmPVC insulated copper earth continuityconductor, switches etc. as detailedmentioned below

UPS DB for Second Floor (For WS)

Note :-

2.2. Primary light point with 1.5 sq.mm wires and 6/10A 240 V switch and earth conitinutiy wire of size 1.5 sq.mm. Avg length up to 9mtr.

2.1. Switch board altration point with 1.5 sq.mm wires and 6/10A 240 V switch and earth conitinutiy wire of size 1.5 sq.mm - Avg length up to 4 mtr

2.0.

2. 32 A DP MCB,10kA : 1No




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)


Nos. UR

Nos. 4

Nos. 2

Mtr. UR

No. UR

Mtrs 60

Nos. 10

3.0.

2.4.

2.3.

2.6.

2.5.

POWER OUTLET FOR UPS/RAWPOWER/PRINTERS & PROJECTORS :Supply, Installation, Testing &Commissioning of computer UPS / RAWpower sockets shuttered, Modular typecomplete with chrome plated mountingbox. The switch box shall be fixed inpartition works/ wall as per requirements.The rate shall be inclusive of connectingthe switches /sockets.

2.7. Supply and Laying of 80X50 mm PVC trunking /Casing Caping laid in open above flase celling and wall and Partion with all accessories.(Each 2mtr lentgh with cover, joints, angle, etc.)

Submain Wiring for switchboard using 2x1.5 Sq.mm Wire with 1x1.5 Sq.mm earth wire from nearest switch board.

80A FP MCCB with PVC Encloser (for UPS)

63A FP MCB with PVC Encloser (for UPS)

Secondary light point looped to above item 2.2 (avg length up to 8mtr)

Unit Rate in Words:

Unit Rate in Words:

Unit Rate in Words:

Unit Rate in Words:

Unit Rate in Words:

Unit Rate in Words:

Unit Rate in Words:

2.9. End joint connector for HDMI cable.

2.8. Suppy and Laying of HDMI cable for Screen & Projector.




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)


Nos. 173

Nos. 12

Nos 3

Nos 1

Nos. 40

Nos. 2

No. 132A DP Socket outlet point for Power Point.

1 no. 6A Socket outlet point for Power Point .

1 no. 16A Socket outlet point for Power Point .

3.7.

3.6.

3.5.

Unit Rate in Words:

Unit Rate in Words:

Unit Rate in Words:

Unit Rate in Words:

Unit Rate in Words:

Unit Rate in Words:

Unit Rate in Words:

3.4. Popup Boxes of 2 set 6 module (on top table) with 2 arrangements - 2nos. of 6A socket +1 no. of 16A switch with 1 no. of data for ups.

3.3. Popup Boxes of 2 set 6 module (on top table) with 2 arrangements - 2nos. of 6A socket +1 no. of 16A switch with 1 no. of data & voice for ups

3.2. 1 No.of socket 6A 5pin universal with 1 No.6A Switch in 3 module box for Projector and Printers.

3.1. 2 Nos.of sockets 6A 5pin universal & 1 No.16A Switch in 6 module box for UPS.




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)


4.0.

Mtrs 46

Mtrs 10

Mtrs 20

Mtrs 45

Mtrs 25

Mtrs 50

4.2. 1 C X 25 Sq.mm Al Arm. Cables


4 C X 16 Sq.mm Cu Arm. Cables

4 C X 6 Sq.mm Al Arm. Cables

4 C X 16 Sq.mm Al Arm. Cables (Including-termination)

3.5 C X 25 Sq.mm Al Arm. Cables (Including termination)

4.6.

4.5.

4.4.

4.1.

MAINS CABLING:Supply, Laying, testing, Excavation andcommissioning of 1.1 KV grade XLPEinsulated, inner sheath PVC taped outersheath PVC extruded, GI strip /wirearmoured, multistranded / solid aluminium/ copper conductor power cable as per IS1554 and specifications, fixed on wall /column / slab / shaft / in existing humepipes / trenches 5 mm thick GI spacer fixed/ coach screws / anchor fastners in wall /column / slab with 2 mm thick GI saddler ,all fixing accessories etc. completeincluding painting of saddler / flat / angleiron etc. or in ground at a depth of 750 /900 mm , the following sizes :-

Unit Rate in Words:

Unit Rate in Words:

Unit Rate in Words:

Unit Rate in Words:

Unit Rate in Words:

Unit Rate in Words:




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)


Mtrs 100

5.0.

Nos 4

Nos 8

Nos 4

Nos 4

Nos 8

6.0.

Mtrs 11606.1.

SUBMAIN WIRING: Supply,Installation,testing & commissioning of SubmainPiping ,Wiring for Power wiring (UPS DB toSB's, UPS Sockets ) with ExistingRaceways / PVC Trunking includinginterconnecting in existing DB's usingcopper lugs , ferrule numbers etc.Submain wiring with 2x2.5 sq.mm with 1.5 Sqmm(E) continuity wire from DB to 6A UPS points through Existing raceways/PVC Trunking (for main & looping) - for UPS points for projector & workstation.

Unit Rate in Words:

Unit Rate in Words:

Unit Rate in Words:

Unit Rate in Words:

Unit Rate in Words:

Unit Rate in Words:

Unit Rate in Words:

5.5. 4 C X 6 Sq.mm Cu. Arm. Cables

5.4. 4 C X 16 Sq.mm Cu Arm. Cables




4.7. 4 C X 6 Sq.mm Cu. Arm. Cables

Supply, Installation, Testing andCommisiong of Al/Cu. End Jointing ofabove cables using compression glands,aluminium / copper lugs, PVC insulationtape, copper earth clip for the abovecables in following size




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)


Mtrs 1000

Mtrs 35

7.0.

Mtr UR

Mtr UR

Mtr. 40

Mtr. Existing

Mtrs Existing50x50 mm PVC Trunking for UPS & Data,Voice sockets

7.5.

RACEWAYS & WIRING : Supply and layingof Heavy gauge factory builtRaceways/Conduits (for under floortrenches ) on existing flooring .Theraceways / conduits shall be fixed to theflooring with clamps for finished levels asper site conditions or through partitionswith all accessories, bends,Tee joints, pullwire etc. but excluding the floor mountedjunction boxes which shall be paidseparately. The metal/PVCconduits/Raceways shall be earth withcopper earthing clips at suitable intervalsthe distance between the data conduits &power conduits shall be maintained atleast 6" apart.

Unit Rate in Words:

Unit Rate in Words:

Unit Rate in Words:

Unit Rate in Words:

Unit Rate in Words:

Unit Rate in Words:

Unit Rate in Words:

7.4. 50x38 mm Aluminium raceways, 2 mm thick.

7.3. 35x35 mm PVC Trunking for UPS & Data,Voice sockets

7.2. 32 mm Dia PVC Flex. Pipe

7.1. 25 mm Dia PVC Flex. Pipe

6.3. Submain wiring with 2x4 sq.mm with 1x2.5 Sqmm(E) continuity wire from DB to 32A DP Power points through Existing raceways/PVC Trunking (for main).

6.2. Submain wiring with 2x2.5 sq.mm with 1.5 Sqmm(E) continuity wire from DB to 16/20A Raw Power & UPS points through Existing raceways/PVC Trunking (for main & looping) - for Power points




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)


7.0.

Mtr UR

Mtr UR

8.0.

Nos. Existing

9.0.

CONDUITS: Supply & Installation of following sizes ofconduits with connector box, sadle andwith all other accessories, for laying of allcamera, speaker & Data cabling

7.1. 25mm dia PVC, MMS grade

G.I. JUNCTION BOXES:Supplying and fixing 4 way GI. junctionboxes with knock-outs on all sidessuitable for Raceways/conduits. The knockout shall be removed at site as perrequirements. The junction boxes shall belaid in trenches for Raceways/conduits asdetailed in item No3. The top cover shallbe fixed with counter sunk screws. (Forfloor trenches).

EARTHING: Supply and laying of all earthing stationswith all earthing works including laying ofGI Strip/ wires from earth pit, but withoutexcavation complete with all materialincluding funnel work. (Excavation,refilling/ Civil Works by NCCS)

Unit Rate in Words:

Unit Rate in Words:

Unit Rate in Words:

8.1. 100x100x50mm

7.2. 32mm dia PVC, MMS grade




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)


Mtrs 30

Mtrs 25

9.2.1.

Nos.

Unit Rate in Words:

Nos. 4

9.1.1. 2

Note-i) The chamber cover & frame shallwithstand the load of fire engine & shall be gotapproved by consultants/Architects.

Unit Rate in Words:

Unit Rate in Words:

9.1.3. 1Cx16sqmm. Cu un arm.Cable

9.1.2. 25 x 5 mm GI earth strip.

PLATE EARTHING – Supply, installation,testing & commissioning of Earthing station asper IS 3043 using G.I. Plate electrode of600X600X6.3mmTH’K complete with 2 Mtrs.long perforated watering pipe of 40 mm dia. &50x6 mm GI strip up to chamber, soiltreatment with charcoal and salt, brickinspection chamber with 450 x 450 mm CIcover, disconnecting link complete with allrequired hardware,accessories. for 50KVAUPS

Note-i) The chamber cover & frame shallwithstand the load of fire engine & shall be gotapproved by consultants/Architects.

ii) Measurement of resistance of each earth station should be in between 2 to 3 Ohm and resistance of complete scheme should be less 1 ohm of earthing layout must be measured, recorded and got approved by Consultants / Architects

PLATE EARTHING – Supply, installation,testing & commissioning of Earthing station asper IS 3043 using G.I. Plate electrode of600X600X6.3mmTH’K complete with 2 Mtrs.long perforated watering pipe of 40 mm dia. &25x6 mm GI strip up to chamber, soiltreatment with charcoal and salt, brickinspection chamber with 450 x 450 mm CIcover, disconnecting link complete with allrequired hardware,accessories. 20KVA forUPS




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)


Mtrs 30

Mtrs 25

ii) Measurement of resistance of each earthstation should be in between 2 to 3 Ohm andresistance of complete scheme should beless 1 ohm of earthing layout must bemeasured, recorded and got approved byConsultants / Architects.

Total Amount for II (Rs.)

Unit Rate in Words:

Unit Rate in Words:

Unit Rate in Words:

9.2.2. 25 x 5 mm GI earth strip.

9.2.3. 1Cx10sqmm. Cu un arm. Cable




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)


III

Mtrs. 3900

2.2.

Nos 103

Nos 45

Nos 54

Nos 103

Nos 198

Nos. 3

Nos 103

2.5.

2.6. 24 Port Patch max Panel

LAN AND VOICE

2.7.

Supply, Installation , Testing &commissioning of Quard plate with , cat 6information outlet , back box , necessaryhardware to be considered , cost ofpunching the cable at both the ends to betaken here.

Unit Rate in Words:

Supply , Store , Install , Test , commission Patch cord (mi.7 feet)

Unit Rate in Words:

Unit Rate in Words:

Unit Rate in Words:

Unit Rate in Words:

Unit Rate in Words:

Unit Rate in Words:

Unit Rate in Words:

2.3. Supply & Installation of dual face flate .

2.2. Supply & Installation of single module face flate .

2.1. Supply & Installation of backbox.

1.1. Supply and laying of CAT 6 cable in existing laid Raceways/ PVC trunking.

Crimping of LAN Cable.

2.4. Supply & Installation of for cat 6 information outlet.




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)


Nos 103

Nos 2

2.8. Supply , Store , Install , Test , commission Patch cord (min.3 feet)

Unit Rate in Words:

Unit Rate in Words:

2.9. Supply , Installation , Testing & commission 50 pair Crone Box

Total Amount for III (Rs.)




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)


IV

1.0.

Set 1

Set 1

Set 1

GREEN POWER UPS SYSTEM

Total Amount for IV (Rs.)

Supply, Installation, testing andcommissioning of 20 kVA Extensible TypeOnline UPS IGBT Dual Conversion type(3Ph.Input and 3 Ph.output) for 30 MinBackup with Battery & stand etc (ProvideMaintenanace free battery)

Unit Rate in Words:

Unit Rate in Words:

Unit Rate in Words:

1.1.

1.2.

1.3.

20 KVA

15 KVA

40 KVA




LABOUR)


LABOUR)


(Rs.) (Rs.) (Rs.)


V

Nos 33

ELECTRICAL FIXTUERS

Supply, installation, testing,commissioning of Light fixtures eithersuspended with MS Dog chains / hooks /surface mounted / recess mounted / floormounted type with necesarry civil/interiorworks for the fixing of fixtures pre cutopenings complete with lamps anddimmable ballast using 3Cx14 /.0076 PVCflexible wires interconnections etc.

NET TOTAL AMOUNTIN (Rs.)

SERVICE TAX _______% ON LABOUR CHARGES ONLY IN (Rs.)

Total Amount for V (Rs.)

TOTAL AMOUNT (I + II+ III + IV+ V) IN (Rs.)

Unit Rate in Words:

1.0.

Square Lights Wipro Cat No: CRCO10RO38HP57, 38WATT (Recess mounted LED luminaire)

(NET TOTAL AMOUNT: Ruppees )


tender details part-ii

Documents