the next generation of fx family the worlds best selling ... · mitsubishi electric turkey elektrik...

12
Improved debugging & troubleshooting functions Increasing productivity & reducing TCO The worlds best selling Compact PLC just got even better Product Information Various built-in functionalities Improved connectivity EBG 257-EN The next generation of FX family iQ-F

Upload: others

Post on 18-Jan-2021

4 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: The next generation of FX family The worlds best selling ... · Mitsubishi Electric Turkey Elektrik Ürünleri A.Ş. Turkey Şerifali Mahallesi Nutuk Sokak No:5 TR-34775 Ümraniye-İSTANBUL

Improved debugging & troubleshooting functions

Increasing productivity & reducing TCO

The worlds best selling Compact PLCjust got even better

Product Information

Various built-in functionalities

Improved connectivity

EBG 257-EN

The next generation of FX familyiQ-F

Page 2: The next generation of FX family The worlds best selling ... · Mitsubishi Electric Turkey Elektrik Ürünleri A.Ş. Turkey Şerifali Mahallesi Nutuk Sokak No:5 TR-34775 Ümraniye-İSTANBUL

FX5U Compact PLC

Outstanding performanceWith the launch of the FX5U compact PLC, as a part of the iQ-F series, Mitsubishi Electric has made the world’s best selling PLC even better. Since the launch of the original FX over 30 years ago, Mitsubishi Electric has sold over 13 million units across the globe.

As the first compact PLC to be seen in the European market, the FX transformed automation by bringing PLC control and functionality into smaller, lower cost appli-cations that would previously have had to rely solely on discrete relay-based logic. For over three decades, Mitsubishi Electric has been the market leader in this sector.

Each generation of the FX has set new standards, and not only in the compact con-trollers class. Successive innovations and improvements have taken these compact controllers into another dimension, deliv-ering performance that was previously the exclusive domain of larger control systems in a compact package.

Now, with the introduction of the FX5U, Mitsubishi Electric has given these com-pact controllers a huge performance boost, focusing on processing power, expansion, built-in functionality and positioning & motion functions. At the same time, users benefit from simpler programming and reduced maintenance effort to greatly reduce the total cost of ownership.

Premium compact PLCThe FX5U gives the FX a performance boost and adds new features that set benchmark standards for compact PLCs. It enables users to develop more complex and sophisticated automation systems, as well as higher per-formance applications, without having to migrate to a larger and more costly PLC fam-ily. At the same time, programming through the same GX Works software used for other controllers in the Mitsubishi Electric range supports scalability.

Designed to improve output and reduce costs

Optimized products for higher production output with less engineering efforts

Built-in Ethernet port

Page 3: The next generation of FX family The worlds best selling ... · Mitsubishi Electric Turkey Elektrik Ürünleri A.Ş. Turkey Şerifali Mahallesi Nutuk Sokak No:5 TR-34775 Ümraniye-İSTANBUL

FX5U Compact PLC

Making high performance control affordableWith their compact dimensions and unri-valled cost/performance ratio, the FX5U PLCs offer the means to drive up innovation in numerous machine control applications and automation tasks, giving users the func-tionality and flexibility to realise new ideas and increase system performance.

Features and benefits: � High speed input & outputs

With embedded multi-speed, interrupt positioning and simultaneous start, users can achieve high speed, precise positioning at low cost with the FX5U. Further, the coun-ter interrupt and sensor interrupt deliver high speed and accurate positioning inde-pendent of PLC scan time.

� Analogue and PID

With 2 analogue inputs and 1 analogue output as standard, and with improved PID performance, users have a low cost means of implementing sophisticated functions at low cost and without the need for additional hardware.

� Improved connectivity

The FX5U offers simple connection options to a wide range of automation equipment, including Mitsubishi Electric servos and inverters, Cognex vision systems, networks and energy meters, with reduced wiring effort and no additional programming.

� Built in Ethernet

With Ethernet communications included as standard, users can easily set up com-munications with other Ethernet-enabled systems and the higher level enterprise, and perform remote data monitoring over the internet plus use the SNTP function (time synchronization from a time server via a network).

� Positioning control

The FX5U includes Mitsubishi Electric´s Simple Motion Unit as an intelligent func-tion module, providing the ability to per-form sophisticated motion control for up to 4 axes. Functions include linear interpo-lation, circular interpolation, positioning control, synchronised control, encoder fol-lowing and electronic cam.

� Advanced synchronous control

Software-based synchronous control can be used as an alternative to mechanical control, such as gear, shaft, transmission and cam. In addition, cam control is even easier with cam auto-generation. Synchronous control can be simply operated (start/stop) for each axis, allowing synchronous and positional control axes within the same program.

� Cam auto-generation

Cam data for a rotary cutter can be gener-ated automatically simply by registering the sheet length, synchronization width, rotary cutter axis dimensions, etc. All servo axes can be synchronized via SSCNETIII/H by plug & play.

� Mark detection

The actual position of the servo motor can be obtained based on the registration mark printed on the high-speed moving film. Compensation of the cutter axis position, based on the registration marks, keeps the constant cutting position.

� Simple troubleshooting

The FX5U offers a range of troubleshooting functions to speed system set-up, increase system availability and reduce maintenance requirements. Comprehensive debugging functions are included, along with improved diagnostics functions. Simple maintenance is facilitated through improved diagnostics including error history, hardware monitor, SD card for logging & tracing functions, automatic system recognition and several program debugging functions.

� Security functions

To protect your intellectual property FX5U comes with several security functions like privilege based program access and program on SD card with copy protection password.

� Backward compatibility

Reuse existing FX3 expansion modules with the FX5U via a bus conversion module and easily port existing FX3 programs to FX5U.

Example of simple motion application

Add-on modules to meet your needs

P+ P+ P+

FX5U series

Inverter

RS485

FX5-40SSC-S

Axis 1

Axis 2MR-JE/J4 series Axis 3

Page 4: The next generation of FX family The worlds best selling ... · Mitsubishi Electric Turkey Elektrik Ürünleri A.Ş. Turkey Şerifali Mahallesi Nutuk Sokak No:5 TR-34775 Ümraniye-İSTANBUL

Mitsubishi Electric Europe B.V. / FA - European Business Group / Gothaer Straße 8 / D-40880 Ratingen / Germany / Tel.: +49(0)2102-4860 / Fax: +49(0)2102-4861120 / [email protected] / https://eu3a.mitsubishielectric.com

Vers

ion

chec

k

Art. no. 271496-B / 11.2014 / Specifications subject to change / All trademarks and copyrights acknowledged.

FX5U Compact PLC

SpecificationsType FX5U-32M FX5U-64M FX5U-80M

I/O range (input:output) 32 (1:1) 64 (1:1) 80 (1:1)

Maximum I/O range (including network) 256 (512)

Dimensions (WxHxD) 150x90x83 220x90x83 285x90x83

CPU performanceLD X0 34 ns

MOV D0 D1 34 ns

Memory size

Program 64 K steps

Comment 2 MB

Device/label memory 120 KB

Power 85–264 V AC

Output type Relay, Transistor

Inte

grat

ed fu

nctio

ns

High speedcounter

1-phase counter 6 ch (200 kHz)2 ch (10 kHz) 8 ch (200 kHz)

2-phase counter 3 ch (200 kHz) 5 ch (10 kHz)

4 ch (200 kHz)4 ch (10 kHz)

Pulse output200 kHz 4 axis (Open collector)

Simple linear interpolation(Transitor type only)

Memory card interface SD card

Communication port Ethernet port, RS485 1ch

AnalogInput (resolution) 2ch (12 bit)

Output (resolution) 1ch (12 bit)

Real time clock Retained up to 10 days with capacitor (Ambient temperature 25°C)

Service power supply (24 V DC) 400 mA

Expansion board slots 1 slot

AdaptorCommunication expandability 2

Analog expandability 4

AustriaGEVAWiener Straße 89A-2500 BadenPhone: +43 (0)2252 / 85 55 20

BelarusOOO TECHNIKONProspect Nezavisimosti 177-9BY-220125 MinskPhone: +375 (0)17 / 393 1177

BelgiumESCO DRIVESCulliganlaan 3BE-1831 DiegemPhone: +32 (0)2 / 717 64 60

BelgiumKONING & HARTMAN B.V.Woluwelaan 31BE-1800 VilvoordePhone: +32 (0)2 / 257 02 40

Bosnia and HerzegovinaINEA RBT d.o.o.Stegne 11SI-1000 LjubljanaPhone: +386 (0)1/ 513 8116

BulgariaAKHNATON4, Andrei Ljapchev Blvd., PO Box 21BG-1756 SofiaPhone: +359 (0)2 / 817 6000

CroatiaINEA CRLosinjska 4 aHR-10000 ZagrebPhone: +385 (0)1 / 36 940 - 01/ -02/ -03

Czech RepublicAutoCont C.S. S.R.O.Kafkova 1853/3CZ-702 00 Ostrava 2Phone: +420 595 691 150

DenmarkBeijer Electronics A/SLykkegardsvej 17DK-4000 RoskildePhone: +45 (0)46/ 75 76 66

DenmarkHANS FØLSGAARD A/STheilgaards Torv 1DK-4600 KøgePhone: +45 4320 8600

EstoniaBeijer Electronics Eesti OÜPärnu mnt.160iEE-11317 TallinnPhone: +372 (0)6 / 51 81 40

FinlandBeijer Electronics OYVanha Nurmijärventie 62 FIN-01670 VantaaPhone: +358 (0)207 / 463 500

FinlandPROVENDOR OYTeljänkatu 8 A3 FIN-28130 PoriPhone: +358 (0) 2 / 522 3300

GreeceUTECO A.B.E.E.5, Mavrogenous Str.GR-18542 PiraeusPhone: +30 (0)211 / 1206-900

HungaryMELTRADE Kft.Fertő utca 14.HU-1107 BudapestPhone: +36 (0)1 / 431-9726

KazakhstanTOO Kazpromavtomatika Ul. Zhambyla 28KAZ-100017 KaragandaPhone: +7 7212 / 50 10 00

LatviaBeijer Electronics SIARitausmas iela 23LV-1058 RigaPhone: +371 (0)6 / 784 2280

LithuaniaBeijer Electronics UABGoštautų g. 3 LT-48324 KaunasPhone: +370 37 262707

MaltaALFATRADE Ltd.99, Paola HillMalta-Paola PLA 1702Phone: +356 (0)21 / 697 816

MoldovaINTEHSIS SRLbld. Traian 23/1MD-2060 KishinevPhone: +373 (0)22 / 66 4242

NetherlandsHIFLEX AUTOM. B.V.Wolweverstraat 22NL-2984 CD RidderkerkPhone: +31 (0)180 / 46 60 04

NetherlandsKONING & HARTMAN B.V.Energieweg 1NL-2627 AP DelftPhone: +31 (0)15 260 99 06

NorwayBeijer Electronics ASPostboks 487NO-3002 DrammenPhone: +47 (0)32 / 24 30 00

PortugalFonseca S.A.R. João Francisco do Casal 87/89PT-3801-997 Aveiro, Esgueira Phone: +351 (0)234 / 303 900

RomaniaSirius Trading & ServicesAleea Lacul Morii Nr. 3RO-060841 Bucuresti, Sector 6Phone: +40 (0)21 / 430 40 06

SerbiaINEA SR d.o.o.Ul. Karadjordjeva 12/217SER-11300 SmederevoPhone: +386 (026) 461 54 01

SlovakiaSIMAP SKJána Derku 1671SK-911 01 TrenčínPhone: +421 (0)32 743 04 72

SloveniaINEA RBT d.o.o.Stegne 11SI-1000 LjubljanaPhone: +386 (0)1 / 513 8116

SwedenBeijer Electronics Automation ABBox 426SE-20124 MalmöPhone: +46 (0)40 / 35 86 00

SwitzerlandOMNI RAY AGIm Schörli 5CH-8600 DübendorfPhone: +41 (0)44 / 802 28 80

UkraineOOO “CSC-AUTOMATION”4-B, M. Raskovoyi St.UA-02660 KievPhone: +380 (0)44 / 494 33 44

IsraelGIRIT CELADON Ltd.12 H’aomanut StreetIL-42505 NetanyaPhone: +972 (0)9 / 863 39 80

LebanonCEG LIBANCebaco Center/Block A Autostrade DORALebanon-BeirutPhone: +961 (0)1 / 240 445

South AfricaADROIT TECHNOLOGIES20 Waterford Office Park 189 Witkoppen RoadZA-FourwaysPhone: + 27 (0)11 / 658 8100

GermanyMitsubishi Electric Europe B.V.Gothaer Straße 8D-40880 RatingenPhone: +49 (0)2102 / 486-0

Czech Rep.Mitsubishi Electric Europe B.V.Radlická 751/113e Avenir Business ParkCZ-158 00 Praha 5Phone: +420 251 551 470

FranceMitsubishi Electric Europe B.V.25, Boulevard des BouvetsF-92741 Nanterre CedexPhone: +33 (0)1 / 55 68 55 68

ItalyMitsubishi Electric Europe B.V.Viale Colleoni 7 Palazzo SirioI-20864 Agrate Brianza (MB)Phone: +39 039 / 60 53 1

IrelandMitsubishi Electric Europe B.V.Westgate Business Park, BallymountIRL-Dublin 24Phone: +353 (0)1 4198800

NetherlandsMitsubishi Electric Europe B.V.Nijverheidsweg 23aNL-3641RP MijdrechtPhone: +31 (0) 297250350

PolandMitsubishi Electric Europe B.V.ul. Krakowska 50PL-32-083 BalicePhone: +48 (0) 12 347 65 00

RussiaMitsubishi Electric (Russia) LLC52, bld. 1 Kosmodamianskaya emb.RU-115054 MoscowPhone: +7 495 / 721 2070

SpainMitsubishi Electric Europe B.V.Carretera de Rubí 76-80 Apdo. 420E-08190 Sant Cugat del Vallés (Barcelona)Phone: +34 (0) 93 / 5653131

SwedenMitsubishi Electric Europe B.V. (Scandinavia) Fjelievägen 8SE-22736 LundPhone: +46 (0) 8 625 10 00

TurkeyMitsubishi Electric Turkey Elektrik Ürünleri A.Ş.Şerifali Mahallesi Nutuk Sokak No:5 TR-34775 Ümraniye-İSTANBUL Phone: +90 (0)216 / 526 39 90

UKMitsubishi Electric Europe B.V.Travellers LaneUK-Hatfield, Herts. AL10 8XBPhone: +44 (0)1707 / 28 87 80

UAEMitsubishi Electric Europe B.V.Dubai Silicon OasisUnited Arab Emirates - DubaiPhone: +971 4 3724716

European Offices Representatives

Page 5: The next generation of FX family The worlds best selling ... · Mitsubishi Electric Turkey Elektrik Ürünleri A.Ş. Turkey Şerifali Mahallesi Nutuk Sokak No:5 TR-34775 Ümraniye-İSTANBUL

Comprehensive communications functions including Ethernet

Monitoring speed and booting time twice as fast

Intuitive operation by multi-touch/gesture

Viewing your production outputhas never looked better

Product Information

High end CPU and expanded memory

EBG 259-EN

The next level of Graphic Operator TerminalsGOT2000 Series

Page 6: The next generation of FX family The worlds best selling ... · Mitsubishi Electric Turkey Elektrik Ürünleri A.Ş. Turkey Şerifali Mahallesi Nutuk Sokak No:5 TR-34775 Ümraniye-İSTANBUL

GOT2000

Advanced functionalityMitsubishi Electric has raised the bar for HMIs with the GOT2000 series, designed to optimise operator control and monitoring of device and line status. With vastly increased performance, advanced functions, seamless connectivity to other automation devices and highly intuitive, tablet-like opera-tion* and the highest quality graphics, the GOT2000 series provides a range of models and sizes to meet the needs of the broadest spread of applications.

With their enhanced functionality, these HMIs extend capabilities beyond monitor-ing and visualisation, providing additional features that will help to reduce downtime, enable fast recovery from simple errors, increase availability and boost production efficiency. More than simply displaying data, these enhanced HMIs deliver genu-ine perspective on the automation process and provide a platform to solve the typical production problems that drive down OEE.

* Some functions such as Multi-touch/gesture are only available on certain models.

A comprehensive line-up of products pro-vides screen sizes from 3.8” up to 15” in four basic ranges: the GT27 for high end appli-cations that demand the highest levels of performance and functionality, the GT25 high performance mid-range model, the GT23 for cost-sensitive applications that can now benefit from new benchmark perfor-mance standards and the GT21 as an entry level model. In addition, a software HMI version, the GT SoftGOT2000, realises all of the GOT2000 features on a PC or panel computer.

Seamless gateway to many devicesThe GOT2000 offers seamless connectivity to Mitsubishi Electric automation devices such as PLCs, variable speed drives, servo drives and robots, simplifying automation system set up. Inbuilt Ethernet communica-tions means users can operate the GOT2000 remotely from a PC (VNC Server) or even from a tablet or portable terminal. An MES interface option enables the GOT2000 to transmit data collected from PLCs and other automation devices directly to higher level system databases, eliminating the need for gateway PCs or complex programming. Fur-ther the GOT2000 comes with the “FA trans-parent” function that enables users to link from a PC through the HMI to any supported connected automation products.

Your window to better production control

GOT2000 improves transparency and productivity in your production

Multi-touch and gestures for easy operation

Page 7: The next generation of FX family The worlds best selling ... · Mitsubishi Electric Turkey Elektrik Ürünleri A.Ş. Turkey Şerifali Mahallesi Nutuk Sokak No:5 TR-34775 Ümraniye-İSTANBUL

GOT2000

Benefits: � Benchmark performance

High-speed processors deliver responsive HMI operation even during high-load activi-ties such as logging, script, alarm or device data transmission. Monitoring speed and booting time is twice as fast as the previous flagship GOT1000 model.

� Increased memory size

With memory four times greater than the models they replace, GOT2000 HMIs enable flexible screen design without any concerns regarding data capacity. The product data compression technology plus up to 128 MB with the use of a standard SD card make it possible.

� Multi-touch/gestures*

GOT2000 series HMIs deliver tablet-like usability with the introduction of multi-touch and gestures, even when wearing gloves. Screen gestures enable users to eas-ily enlarge screens for better visualisation and easy operation of small switches. After enlarging, users can scroll across the dis-play. Object gestures allow specific objects to be enlarged, scrolled or flicked, includ-ing historical data lists, alarm displays, trend graphs and documents. GOT2000 screens also allow two-point pressing, for simultane-ous operation of two switches on important operations – such as ”interlock release” and ”start”. This eliminates the need for external panel hardware.

� Beautiful graphics

GOT2000 HMIs provide 65536 colours, and support a wide range of image formats – including PNG – for clear screens with well defined objects that are crisp even when enlarged or reduced. The HMI also supports a library of outline fonts in different sizes.

Simplified startup and debugging

Reusable sample projects

� Advanced communications

All GOT2000 HMIs provide Ethernet, RS232 and RS422/485 communications. SD card and front and rear USB ports deliver increased flexibility. Options include a wireless LAN interface for communication with PCs and tablets, enabling users to download/upload screen data and use the FA Transparent function.

� Easy screen design

The GOT2000 screens are fully compatible with HMI design software GT Works3, with features such as the ability to use templates and sample projects to greatly reduce the number of steps in the screen creation process. GT Works3 also offers a full suite of common functions, objects and shapes. Help facilities include a ”device input assist” function and a search wizard for the GT Works3 manuals.

� Backwards compatibility

Providing an advanced solution for today’s monitoring and visualisation requirements, the GOT2000 HMIs provide significant improvements on the GOT1000 models that they replace, while ensuring backwards compatibility: panel sizes remain identical whilst existing projects can be easily ported to the HMIs.

� Horizontal integration

The superior integration capabilities of Mitsubishi Electric factory automation prod-ucts is demonstrated by functions such as parameter and program backup/restore for PLCs, inverters and servo drives; GOT transparent mode to connect via the HMI to Mitsubishi Electric devices for program-ming, monitoring etc; pre-made monitor screens for network diagnostics, etc.

GT Works3 displays your screen assets

*Some functions such as Multi-touch/gesture are only available on certain models.

Personal computer for program-ming and setup software

USB

Ethernet

HUB

Bus connection CPU direct connection Ethernet connection

Easily access remote PLC

Wireless LAN connection

CPU direct connection Ethernet connection

RS485 connection

Mount wireless LAN communication module (GT25-WLAN) onto GOT unit

Mitsubishi Electric PLC

CC-Link IE Field network CC-Link IE controller network, etc.

Mitsubishi Electric PLCMitsubishi Electric servo amplifier

Mitsubishi Electric inverter

Mitsubishi Electric PLC Ethernet

Mitsubishi Electric PLC , etc.Bus connection / CPU direct connection / Computer link connection / Ethernet connection

Page 8: The next generation of FX family The worlds best selling ... · Mitsubishi Electric Turkey Elektrik Ürünleri A.Ş. Turkey Şerifali Mahallesi Nutuk Sokak No:5 TR-34775 Ümraniye-İSTANBUL

Mitsubishi Electric Europe B.V. / FA - European Business Group / Gothaer Straße 8 / D-40880 Ratingen / Germany / Tel.: +49(0)2102-4860 / Fax: +49(0)2102-4861120 / [email protected] / https://eu3a.mitsubishielectric.com

Vers

ion

chec

k

Art. no. 271500-B / 11.2014 / Specifications subject to change / All trademarks and copyrights acknowledged.

GOT2000

Specifications

Dimensions

Item GT2715 (2 Models)

GT2712 (4 Models)

GT2710 (6 Models) 4

GT2708 (4 Models)

GT2510 (4 Models)

GT2508 (4 Models)

GT2310 (2 Models)

GT2308 (2 Models)

GT2103 (2 Models)

Display section 1 2

Display device TFT color LCD TFT (monochrome)

Screen size 15" 12.1" 10.4" 8.4" 10.4" 8.4" 10.4" 8.4" 3.8"

Resolution 1024x768 800x600 800x600 640x480 800x600 640x480 640x480 640x480 320x128

Display size WxH (mm) 304.1x228.1 246.0x184.5 211.2x158.4 170.9x128.2 211.2x158.4 170.9x128.2 211.2x158.4 170.9x128.2 89.0x35.6

Number of characters (chars. x lines)

64x48 (16 dot)85x64 (12 dot)

50x37 (16 dot)66x50 (12 dot)

50x37 (16 dot)66x50 (12 dot)

40x30 (16 dot)53x40 (12 dot)

50x37 (16 dot)66x50 (12 dot)

40x30 (16 dot)53x40 (12 dot)

40x30 (16 dot)53x40 (12 dot)

40x30 (16 dot)53x40 (12 dot)

20x8 (16 dot)26x10 (12 dot)

User memory

Memory for storage (ROM) 57 MB 32 MB 9 MB 3 MB

Memory for operation (RAM) 128 MB 80 MB 9 MB —

Built-ininterface

RS232Transmission speed 1 ch: 115200/57600/38400/19200/9600/4800bps

Connector shape D-sub 9-pin (male) MINI-DIN6-pin (female) (GT2103-PMBD: none)

RS422/ 485

Transmission speed 1 ch: 115200/57600/38400/19200/9600/4800bps

Connector shape D-sub 9-pin (female) Terminal block 9-pin (GT2103-PMBD: 5-pin)

Ethernet 1 ch Data transfer method: 10BASE-T/100BASE-TX Connector shape: RJ-45 (modular jack) (GT2103-PMBDS: none)

USB Maximum transfer speed: High-Speed 480 Mbps, Connector shape: USB Mini-BMax. transfer speed: Full-Speed 12 Mbps,

USB Mini-BSD card 1 ch SDHC compliant (maximum 32 GB) (GT2103: card slot optional)

Protective structure Front: IP67f 3 In control panel: IP2X

1 On LCD panels, bright dots (permanently lit) and black dots (never lit) generally appear. Because the number of display elements that exist on an LCD panel is large, it is not possible to reduce appearance of the bright and black dots to zero. Individual differences in LCD panels may cause differences in color, uneven brightness and flickering. Note that these are characteristics of LCD panels and it does not mean the products are defective or damaged.

2 Flickering may occur due to vibration or shock depending on the display colors.3 Pressing “PUSH” mark firmly and locking the USB environmentally protective cover makes it conform to IP67f. (The USB interface conforms to IP2X when the cover is open.) However, this does not guarantee protection in all users’ environments.

The unit may not be used in an environment where it is exposed to splashing oil or chemicals for a long time or it is soaked with oil mist.4 GT2710-STBA & GT2710-STBD Resolution: SVGA: 800x600 dots. Number of characters: 16-dot standard font: 50 chars. x 37 lines; 12-dot standard font: 66 chars. x 50 lines

A

BFF1

F1

DD

1

A1

C

E

BFF1

F1

DD

1

E

AA1

C

AustriaGEVAWiener Straße 89A-2500 BadenPhone: +43 (0)2252 / 85 55 20

BelarusOOO TECHNIKONProspect Nezavisimosti 177-9BY-220125 MinskPhone: +375 (0)17 / 393 1177

BelgiumESCO DRIVESCulliganlaan 3BE-1831 DiegemPhone: +32 (0)2 / 717 64 60

BelgiumKONING & HARTMAN B.V.Woluwelaan 31BE-1800 VilvoordePhone: +32 (0)2 / 257 02 40

Bosnia and HerzegovinaINEA RBT d.o.o.Stegne 11SI-1000 LjubljanaPhone: +386 (0)1/ 513 8116

BulgariaAKHNATON4, Andrei Ljapchev Blvd., PO Box 21BG-1756 SofiaPhone: +359 (0)2 / 817 6000

CroatiaINEA CRLosinjska 4 aHR-10000 ZagrebPhone: +385 (0)1 / 36 940 - 01/ -02/ -03

Czech RepublicAutoCont C.S. S.R.O.Kafkova 1853/3CZ-702 00 Ostrava 2Phone: +420 595 691 150

DenmarkBeijer Electronics A/SLykkegardsvej 17DK-4000 RoskildePhone: +45 (0)46/ 75 76 66

DenmarkHANS FØLSGAARD A/STheilgaards Torv 1DK-4600 KøgePhone: +45 4320 8600

EstoniaBeijer Electronics Eesti OÜPärnu mnt.160iEE-11317 TallinnPhone: +372 (0)6 / 51 81 40

FinlandBeijer Electronics OYVanha Nurmijärventie 62 FIN-01670 VantaaPhone: +358 (0)207 / 463 500

FinlandPROVENDOR OYTeljänkatu 8 A3 FIN-28130 PoriPhone: +358 (0) 2 / 522 3300

GreeceUTECO A.B.E.E.5, Mavrogenous Str.GR-18542 PiraeusPhone: +30 (0)211 / 1206-900

HungaryMELTRADE Kft.Fertő utca 14.HU-1107 BudapestPhone: +36 (0)1 / 431-9726

KazakhstanTOO Kazpromavtomatika Ul. Zhambyla 28KAZ-100017 KaragandaPhone: +7 7212 / 50 10 00

LatviaBeijer Electronics SIARitausmas iela 23LV-1058 RigaPhone: +371 (0)6 / 784 2280

LithuaniaBeijer Electronics UABGoštautų g. 3 LT-48324 KaunasPhone: +370 37 262707

MaltaALFATRADE Ltd.99, Paola HillMalta-Paola PLA 1702Phone: +356 (0)21 / 697 816

MoldovaINTEHSIS SRLbld. Traian 23/1MD-2060 KishinevPhone: +373 (0)22 / 66 4242

NetherlandsHIFLEX AUTOM. B.V.Wolweverstraat 22NL-2984 CD RidderkerkPhone: +31 (0)180 / 46 60 04

NetherlandsKONING & HARTMAN B.V.Energieweg 1NL-2627 AP DelftPhone: +31 (0)15 260 99 06

NorwayBeijer Electronics ASPostboks 487NO-3002 DrammenPhone: +47 (0)32 / 24 30 00

PortugalFonseca S.A.R. João Francisco do Casal 87/89PT-3801-997 Aveiro, Esgueira Phone: +351 (0)234 / 303 900

RomaniaSirius Trading & ServicesAleea Lacul Morii Nr. 3RO-060841 Bucuresti, Sector 6Phone: +40 (0)21 / 430 40 06

SerbiaINEA SR d.o.o.Ul. Karadjordjeva 12/217SER-11300 SmederevoPhone: +386 (026) 461 54 01

SlovakiaSIMAP SKJána Derku 1671SK-911 01 TrenčínPhone: +421 (0)32 743 04 72

SloveniaINEA RBT d.o.o.Stegne 11SI-1000 LjubljanaPhone: +386 (0)1 / 513 8116

SwedenBeijer Electronics Automation ABBox 426SE-20124 MalmöPhone: +46 (0)40 / 35 86 00

SwitzerlandOMNI RAY AGIm Schörli 5CH-8600 DübendorfPhone: +41 (0)44 / 802 28 80

UkraineOOO “CSC-AUTOMATION”4-B, M. Raskovoyi St.UA-02660 KievPhone: +380 (0)44 / 494 33 44

IsraelILAN & GAVISH Ltd.24 Shenkar St., Kiryat ArieIL-49001 Petah-TikvaPhone: +972 (0)3 / 922 18 24

IsraelGIRIT CELADON Ltd.12 H’aomanut StreetIL-42505 NetanyaPhone: +972 (0)9 / 863 39 80

LebanonCEG LIBANCebaco Center/Block A Autostrade DORALebanon-BeirutPhone: +961 (0)1 / 240 445

South AfricaADROIT TECHNOLOGIES20 Waterford Office Park 189 Witkoppen RoadZA-FourwaysPhone: + 27 (0)11 / 658 8100

GermanyMitsubishi Electric Europe B.V.Gothaer Straße 8D-40880 RatingenPhone: +49 (0)2102 / 486-0

Czech Rep.Mitsubishi Electric Europe B.V.Radlická 751/113e Avenir Business ParkCZ-158 00 Praha 5Phone: +420 251 551 470

FranceMitsubishi Electric Europe B.V.25, Boulevard des BouvetsF-92741 Nanterre CedexPhone: +33 (0)1 / 55 68 55 68

ItalyMitsubishi Electric Europe B.V.Viale Colleoni 7 Palazzo SirioI-20864 Agrate Brianza (MB)Phone: +39 039 / 60 53 1

IrelandMitsubishi Electric Europe B.V.Westgate Business Park, BallymountIRL-Dublin 24Phone: +353 (0)1 4198800

NetherlandsMitsubishi Electric Europe B.V.Nijverheidsweg 23aNL-3641RP MijdrechtPhone: +31 (0) 297250350

PolandMitsubishi Electric Europe B.V.ul. Krakowska 50PL-32-083 BalicePhone: +48 (0) 12 347 65 00

RussiaMitsubishi Electric (Russia) LLC52, bld. 1 Kosmodamianskaya emb.RU-115054 MoscowPhone: +7 495 / 721 2070

SpainMitsubishi Electric Europe B.V.Carretera de Rubí 76-80 Apdo. 420E-08190 Sant Cugat del Vallés (Barcelona)Phone: +34 (0) 93 / 5653131

SwedenMitsubishi Electric Europe B.V. (Scandinavia) Fjelievägen 8SE-22736 LundPhone: +46 (0) 8 625 10 00

TurkeyMitsubishi Electric Turkey Elektrik Ürünleri A.Ş.Şerifali Mahallesi Nutuk Sokak No:5 TR-34775 Ümraniye-İSTANBUL Phone: +90 (0)216 / 526 39 90

UKMitsubishi Electric Europe B.V.Travellers LaneUK-Hatfield, Herts. AL10 8XBPhone: +44 (0)1707 / 28 87 80

UAEMitsubishi Electric Europe B.V.Dubai Silicon OasisUnited Arab Emirates - DubaiPhone: +971 4 3724716

European Offices Representatives

Type A A1 B C D D1 E F F1

GT2715 397 322 300 322 60

6

382 281

10

GT2712 316 241 246 24152

301 227

GT2710/2510303 208 218 228 288 199

GT2310 56

GT2708/2508241 166 194

171.6 52226 175

GT2308 166 56

GT2103 113 64 74 64 27 4 104 65 9.5

All dimensions in mm

GT23/25/27 GT21

Page 9: The next generation of FX family The worlds best selling ... · Mitsubishi Electric Turkey Elektrik Ürünleri A.Ş. Turkey Şerifali Mahallesi Nutuk Sokak No:5 TR-34775 Ümraniye-İSTANBUL

Long term recording of machine conditions by USB trace function

Advanced energy saving functions reduce production costs

Excellent Drive PerformancePrecise, powerful, versatile

FR-A800

Product Information

Higher production quality by three times faster response mode

EBG 248-EN

Frequency Inverters

Page 10: The next generation of FX family The worlds best selling ... · Mitsubishi Electric Turkey Elektrik Ürünleri A.Ş. Turkey Şerifali Mahallesi Nutuk Sokak No:5 TR-34775 Ümraniye-İSTANBUL

FR-A800 / Inverters

Excellent control performance and response levelDesigned for unparalleled drive precision, speed control, simple startup, and versatil-ity, Mitsubishi Electric has developed a new generation of drive technology: the remark-able FR-A800.

This new drive series is the successor of the highly successful FR-A700 series. It is equipped with the new state-of-the-art high-speed processor by Mitsubishi Electric. With better than ever control performance and response level, safe and accurate operation is assured in a diverse range of applications.

Some of the outstanding features are the integrated USB port for programming and parameter copying, an-easy to-read control panel, optimum power usage and energy saving functions, improved system safety, three expansion slots for a range of option and supported network cards

With its impressive versatility to meet equip-ment system needs ranging from machining and molding to winding, the FR-A800 is an extremely economical and highly-versatile solution for a wide range of applications.

The FR-A800 Series is fully backwards com-patible with the FR-A700 series. Parameters can be easily copied by FR Configurator2. In order to match the former machine response time, the input/output signals of the FR-A800 can be delayed.

Powerful features and intelligent functions

� Real Sensorless Vector Control

The Real Sensorless Vector control provides high-precision, fast-response speed control in open loop. Combined with offline auto tuning, a maximum of 200 % torque can be generated from 0.2 Hz to 400 Hz.

� Perfect autotuning of PM and IM motors

Based on the new autotuning method, even Permanent Magnet motors can be used with ease.

� Absolute positioning & built-in PLC function

By using the built-in absolute positioning function and the built-in high level PLC function, an complete machine can be managed by a stand alone drive. Sensor-less positioning is possible with IPM Motors.

� Optimum excitation control

Optimum control of the excitation cur-rent maximizes motor efficiency for addi-tional energy savings. As an example, an approximately 15 % increase in efficiency is obtained at a motor load torque of 10 % compared to conventional V/F control.

Leading drive performance: the FR-A800

Perfect for crane appliactions due to built-in 100 % ED Break chopper up to 55 k

Positioning is one out of many scopes.

Fast processors due to short response times.

Page 11: The next generation of FX family The worlds best selling ... · Mitsubishi Electric Turkey Elektrik Ürünleri A.Ş. Turkey Şerifali Mahallesi Nutuk Sokak No:5 TR-34775 Ümraniye-İSTANBUL

FR-A800 / Inverters

� High flexibility by built-in PLC

The FR-A800 is easy to program with Mitsubishi Electric standard PLC software, which is available in FR Confiurator2. It is also possible to combine the PLC program with the Real time clock of the LU-08 opera-tion panel.

� Energy saving by 24 V control power supply

By connecting an external 24 V DC control power supply, the system can be operated even when the main power supply is turned off. Furthermore parameters can be set and network communication can be maintained with this power supply which facilitates safe maintenance. More energy saving can be achieved by using the automatic “stand by” function which switches off the drive main power supply. Capacitors and other devices are offline, so heat loss is reduced.

� Improved system safety

The FR-A800 series has a two channel emer-gency stop for safe shutdown. This ensures safe operation in compliance with the Euro-pean Machinery Directive without installa-tion of another contactor. The FR-A800 thus conforms to the EN ISO13849-1/PLd cat. 3, EN 61508 and EN 61800-5-2 SIL2 standards.

� Easy operation

The operation panel with the one touch Dig-ital Dial allows direct access to all important parameters. Select the operation panel ideal for your needs. Choose either a LU operation panel with an LCD screen offering enhanced display functionality and a clock function, or a more economical DU operation panel with a 5-digit, 12-segment display.

The FR-A800 series also allows the con-nection of a Mitsubishi Electric graphical operation terminal (GOT). Communica-tion parameters for the HMI connection are automatically set as a batch. The GOT provides operators with an easy-to-follow and intuitively high resolution display and facilitates easy operation via a touch panel.

� Comprehensive noise countermeasures

The drive’s built-in EMC filter ensures full compliance with European EMC Directive standards (EN 61800-3 2nd environment category C3), so separate certification is not required for the drive. The newly developed drive technology and power supply tech-nology significantly reduce electromagnetic noise.

� Energy saving functions

Take advantage of the energy saving func-tion, that suits your application. You can for example reduce power consumption in the standby mode by using the cooling fan ON/OFF control. During operation optimum excitation control or returning regenerative motor energy to other drives helps to save energy. The impressive energy savings can be displayed on the energy monitor.

� More energy savings with PM motors

The FR-A800 series enables factory energy savings, which can be achieved by replacing current induction motors with permanent magnet motors (PM motors). A PM motor is very efficient because the current does not flow to the rotor, so there is no second-ary copper loss. There is also magnetic flux generated by permanent magnets, so less current is required to drive a motor.

� Various network compatibility

The drive can be controlled and monitored by a controller via network. For the major network protocols such as CC-Link IE Field, CC-Link, Profibus DP/DPV1, Profinet/Ether-Net IP/EtherCat (to be released soon) and SSCNETIII/H as well as DeviceNet™ and LONWORKS communication options are available. RS485 communication (Mitsubishi Electric drive protocol, Modbus-RTU proto-col) is supported as standard.

� Easy maintenance

To reduce the wiring check time, only a cover has to be removed for accessing the target wiring area. The administration of dif-ferent drives has become much more sim-ple, because serial numbers of drives can be retrieved via communication.

� Easy set-up

Users can comfortably setup the drives with the Setup-Software FR Configurator2. The easy plug-and-play connection to USB ter-minal is equipped as standard. Parameters can be simply copied to commercial USB memory devices.

� Long life components

The cooling fans and the built-in capaci-tors have an estimated lifespan of 10 years. By using the ON/OFF control function, the service life of the fans can be even further extended.

FR-LU08 as full text display with up to fifteen language and real time clock.

FWD

RE V

STOPRES ET

RE V

FWD

STOPRES ET

P.RUN

PUEX TNET

MONPRM

IMPM

Comprehensive noise countermeasures

90

80

70

60

50

40

30

20

10

030 50 70 100 200 300

[dBμV/m]

Frequency [MHz]

EN61800-3Category C3 QP level

FR-A700 QP value

FR-A800 QP value

EN61800-3Category C3 QP level

FR-A700 QP value

FR-A800 QP value

Page 12: The next generation of FX family The worlds best selling ... · Mitsubishi Electric Turkey Elektrik Ürünleri A.Ş. Turkey Şerifali Mahallesi Nutuk Sokak No:5 TR-34775 Ümraniye-İSTANBUL

Mitsubishi Electric Europe B.V. / FA - European Business Group / Gothaer Straße 8 / D-40880 Ratingen / Germany / Tel.: +49(0)2102-4860 / Fax: +49(0)2102-4861120 / [email protected] / https://eu3a.mitsubishielectric.com

Vers

ion

chec

k

Art. no. 271482-B / 06.2014 / Specifications subject to change / All trademarks and copyrights acknowledged.

FR-A800 / Inverters

AustriaGEVAWiener Straße 89A-2500 BadenPhone: +43 (0)2252 / 85 55 20

BelarusOOO TECHNIKONProspect Nezavisimosti 177-9BY-220125 MinskPhone: +375 (0)17 / 393 1177

BelgiumESCO DRIVESCulliganlaan 3BE-1831 DiegemPhone: +32 (0)2 / 717 64 60

BelgiumKONING & HARTMAN B.V.Woluwelaan 31BE-1800 VilvoordePhone: +32 (0)2 / 257 02 40

Bosnia and HerzegovinaINEA RBT d.o.o.Stegne 11SI-1000 LjubljanaPhone: +386 (0)1/ 513 8116

BulgariaAKHNATON4, Andrei Ljapchev Blvd., PO Box 21BG-1756 SofiaPhone: +359 (0)2 / 817 6000

CroatiaINEA CRLosinjska 4 aHR-10000 ZagrebPhone: +385 (0)1 / 36 940 - 01/ -02/ -03

Czech RepublicAutoCont C.S. S.R.O.Kafkova 1853/3CZ-702 00 Ostrava 2Phone: +420 595 691 150

DenmarkBeijer Electronics A/SLykkegardsvej 17DK-4000 RoskildePhone: +45 (0)46/ 75 76 66

DenmarkHANS FØLSGAARD A/STheilgaards Torv 1DK-4600 KøgePhone: +45 4320 8600

EstoniaBeijer Electronics Eesti OÜPärnu mnt.160iEE-11317 TallinnPhone: +372 (0)6 / 51 81 40

FinlandBeijer Electronics OYVanha Nurmijärventie 62 FIN-01670 VantaaPhone: +358 (0)207 / 463 500

FinlandPROVENDOR OYTeljänkatu 8 A3 FIN-28130 PoriPhone: +358 (0) 2 / 522 3300

GreeceUTECO A.B.E.E.5, Mavrogenous Str.GR-18542 PiraeusPhone: +30 (0)211 / 1206-900

HungaryMELTRADE Kft.Fertő utca 14.HU-1107 BudapestPhone: +36 (0)1 / 431-9726

KazakhstanTOO Kazpromavtomatika Ul. Zhambyla 28KAZ-100017 KaragandaPhone: +7 7212 / 50 10 00

LatviaBeijer Electronics SIARitausmas iela 23LV-1058 RigaPhone: +371 (0)6 / 784 2280

LithuaniaBeijer Electronics UABGoštautų g. 3 LT-48324 KaunasPhone: +370 37 262707

MaltaALFATRADE Ltd.99, Paola HillMalta-Paola PLA 1702Phone: +356 (0)21 / 697 816

MoldovaINTEHSIS SRLbld. Traian 23/1MD-2060 KishinevPhone: +373 (0)22 / 66 4242

NetherlandsHIFLEX AUTOM. B.V.Wolweverstraat 22NL-2984 CD RidderkerkPhone: +31 (0)180 / 46 60 04

NetherlandsIMTECH Marine Netherlands B.V.Sluisjesdijk 155NL-3087 AG RotterdamPhone: +31 10 / 487 18 24

NetherlandsKONING & HARTMAN B.V.Energieweg 1NL-2627 AP DelftPhone: +31 (0)15 260 99 06

NorwayBeijer Electronics ASPostboks 487NO-3002 DrammenPhone: +47 (0)32 / 24 30 00

PortugalFonseca S.A.R. João Francisco do Casal 87/89PT-3801-997 Aveiro, Esgueira Phone: +351 (0)234 / 303 900

RomaniaSirius Trading & ServicesAleea Lacul Morii Nr. 3RO-060841 Bucuresti, Sector 6Phone: +40 (0)21 / 430 40 06

SerbiaINEA SR d.o.o.Ul. Karadjordjeva 12/217SER-11300 SmederevoPhone: +386 (026) 461 54 01

SlovakiaSIMAP SKJána Derku 1671SK-911 01 TrenčínPhone: +421 (0)32 743 04 72

SloveniaINEA RBT d.o.o.Stegne 11SI-1000 LjubljanaPhone: +386 (0)1 / 513 8116

SwedenBeijer Electronics Automation ABBox 426SE-20124 MalmöPhone: +46 (0)40 / 35 86 00

SwitzerlandOMNI RAY AGIm Schörli 5CH-8600 DübendorfPhone: +41 (0)44 / 802 28 80

UkraineOOO “CSC-AUTOMATION”4-B, M. Raskovoyi St.UA-02660 KievPhone: +380 (0)44 / 494 33 44

EgyptI.C. SYSTEMS Ltd.23 Al-Saad-Al-Alee St.EG-Sarayat, Maadi, CairoPhone: +20 (0) 2 / 235 98 548

IsraelSHERF MOTION TECHN. Ltd.Rehov Hamerkava 19IL-58851 HolonPhone: +972 (0)3 / 559 54 62

LebanonCEG LIBANCebaco Center/Block A Autostrade DORALebanon-BeirutPhone: +961 (0)1 / 240 445

South AfricaADROIT TECHNOLOGIES20 Waterford Office Park 189 Witkoppen RoadZA-FourwaysPhone: + 27 (0)11 / 658 8100

GermanyMitsubishi Electric Europe B.V.Gothaer Straße 8D-40880 RatingenPhone: +49 (0)2102 / 486-0

Czech Rep.Mitsubishi Electric Europe B.V.Radlická 751/113e Avenir Business ParkCZ-158 00 Praha 5Phone: +420 251 551 470

FranceMitsubishi Electric Europe B.V.25, Boulevard des BouvetsF-92741 Nanterre CedexPhone: +33 (0)1 / 55 68 55 68

ItalyMitsubishi Electric Europe B.V.Viale Colleoni 7 Palazzo SirioI-20864 Agrate Brianza (MB)Phone: +39 039 / 60 53 1

IrelandMitsubishi Electric Europe B.V.Westgate Business Park, BallymountIRL-Dublin 24Phone: +353 (0)1 4198800

NetherlandsMitsubishi Electric Europe B.V.Nijverheidsweg 23aNL-3641RP MijdrechtPhone: +31 (0) 297250350

PolandMitsubishi Electric Europe B.V.ul. Krakowska 50PL-32-083 BalicePhone: +48 (0) 12 630 47 00

RussiaMitsubishi Electric Europe B.V.52, bld. 3 Kosmodamianskaya nab 8 floor RU-115054 MoscowPhone: +7 495 / 721 2070

SpainMitsubishi Electric Europe B.V.Carretera de Rubí 76-80 Apdo. 420E-08190 Sant Cugat del Vallés (Barcelona)Phone: +34 (0) 93 / 5653131

SwedenMitsubishi Electric Europe B.V. (Scandinavia) Fjelievägen 8SE-22736 LundPhone: +46 (0) 8 625 10 00

TurkeyMitsubishi Electric Turkey Elektrik Ürünleri A.Ş.Şerifali Mahallesi Nutuk Sokak No:5 TR-34775 Ümraniye-İSTANBUL Phone: +90 (0)216 / 526 39 90

UKMitsubishi Electric Europe B.V.Travellers LaneUK-Hatfield, Herts. AL10 8XBPhone: +44 (0)1707 / 28 87 80

UAEMitsubishi Electric Europe B.V.Dubai Silicon OasisUnited Arab Emirates - DubaiPhone: +971 4 3724716

European Offices Representatives

Specifications

Operating conditions Specifications

Power supply FR-A820: 3-phase, 200–240 V AC (-15 %, +10 %) at 50/60 Hz; FR-A840: 3-phase, 380–500 V AC (-15 %, +10 %) at 50/60 Hz

Ambient temperature -10 ºC to +50 ºC (non-freezing) (LD, ND, HD ratings); -10 ºC to +40 ºC (non-freezing) (SLD rating)

Ambient humidity Compliance to IEC 60721-3-3 class 3C2, maximum 95 % RH (non-condensing)

Altitude Maximum 1000 m above sea level

Protection rating IP20 up to 22 kW, IP00 from 30 kW

Vibration resistance Max. 0.6 G

Break chopper Built-in up to 55 k (400 V) and up to 22 k (200 V)

1 SLD= Super light duty (110 % at 60 s, 120 % at 3 s); LD= Light duty (120 % at 60 s, 150 % at 3 s); ND= Normal duty (150 % at 60 s, 200 % at 3 s); HD= Heavy duty (200 % at 60 s, 250 % at 3 s)2 The FR-A842 models must be operated in combination with a converter unit FR-CC2, which has to be ordered seperately. For more details please refer to the inverter family catalogue.

Type Rated current [A] Rated motor capacity [kW]WxHxD (mm)200 V class SLD1 LD1 ND1 HD1 SLD1 LD1 ND1 HD1

FR-A820-00046 4.6 4.2 3 1.5 0.75 0.75 0.4 0.2 110x260x110

FR-A820-00077 7.7 7 5 3 1.5 1.5 0.75 0.4 110x260x125

FR-A820-00105 10.5 9.6 8 5 2.2 2.2 1.5 0.75

150x260x140FR-A820-00167 16.7 15.2 11 8 3.7 3.7 2.2 1.5

FR-A820-00250 25 23 17.5 11 5.5 5.5 3.7 2.2

FR-A820-00340 34 31 24 17.5 7.5 7.5 5.5 3.7220x260x170

FR-A820-00490 49 45 33 24 11 11 7.5 5.5

FR-A820-00630 63 58 46 33 15 15 11 7.5 220x300x190

FR-A820-00770 77 70.5 61 46 18.5 18.5 15 11

250x400x190FR-A820-00930 93 85 76 61 22 22 18.5 15

FR-A820-01250 125 114 90 76 30 30 22 18.5

FR-A820-01540 154 140 115 90 37 37 30 22 325x550x195

FR-A820-01870 187 170 145 115 45 45 37 30435x550x250

FR-A820-02330 233 212 175 145 55 55 45 37

FR-A820-03160 316 288 215 175 75 75 55 45 465x700x250

FR-A820-03800 380 346 288 215 110 90 75 55465x740x360

FR-A820-04750 475 432 346 288 132 110 90 75

Type Rated current [A] Rated motor capacity [kW]WxHxD (mm)400 V class SLD1 LD1 ND1 HD1 SLD1 LD1 ND1 HD1

FR-A840-00023 2.3 2.1 1.5 0.8 0.75 0.75 0.4 0.2

150x260x140

FR-A840-00038 3.8 3.5 2.5 1.5 1.5 1.5 0.75 0.4

FR-A840-00052 5.2 4.8 4 2.5 2.2 2.2 1.5 0.75

FR-A840-00083 8.3 7.6 6 4 3.7 3.7 2.2 1.5

FR-A840-00126 12.6 11.5 9 6 5.5 5.5 3.7 2.2

FR-A840-00170 17 16 12 9 7.5 7.5 5.5 3.7220x260x170

FR-A840-00250 25 23 17 12 11 11 7.5 5.5

FR-A840-00310 31 29 23 17 15 15 11 7.5220x300x190

FR-A840-00380 38 35 31 23 18.5 18.5 15 11

FR-A840-00470 47 43 38 31 22 22 18.5 15250x400x190

FR-A840-00620 62 57 44 38 30 30 22 18.5

FR-A840-00770 77 70 57 44 37 37 30 22 325x550x195

FR-A840-00930 93 85 71 57 45 45 37 30

435x550x250FR-A840-01160 116 106 86 71 55 55 45 37

FR-A840-01800 180 144 110 86 75 75 55 45

FR-A840-02160 216 180 144 110 110 90 75 55465x620x300

FR-A840-02600 260 216 180 144 132 110 90 75

FR-A840-03250 325 260 216 180 160 132 110 90465x740x360

FR-A840-03610 361 325 260 216 185 160 132 110

FR-A840-04320 432 361 325 260 220 185 160 132498x1010x380

FR-A840-04810 481 432 361 325 250 220 185 160

FR-A840-05470 547 481 432 361 280 250 220 185

680x1010x380FR-A840-06100 610 547 481 432 315 280 250 220

FR-A840-06830 683 610 547 481 355 315 280 250

FR-A842-077002 770 683 610 547 400 355 315 280540x1330x440

FR-A842-086602 866 770 683 610 450 400 355 315

FR-A842-096202 962 866 770 683 500 450 400 355

680x1580x440FR-A842-109402 1094 962 866 770 560 500 450 400

FR-A842-121202 1212 1094 962 866 630 560 500 450