the operation processing of cluster adjusting via obd method€¦ · ⑶turn on the vehicle...
TRANSCRIPT
The operation processing of cluster adjusting via OBD method
(Take the VW GOLF F4 for an example： ) ⑴Try to find the OBD-II 16 pin diagnostic plug in vehicle.
⑵Choose proper adapter and connect the cable with 9 PIN COM, 25 PIN COM with DIGIMASTER- II body.
⑶Turn on the vehicle electrical power, click into the “OdoAd Juster”.
⑷Click into “European vehicles”.
www.cardiag.co
.uk
Any questions, please don't hesitate to contact us. Email: [email protected] Skype:cardiag.co.uk [email protected] Yahoo:[email protected] Phone:86-15072360818
⑸Click into “ VW ”.
⑹Click into “Diagnosis”.
⑺Click into “Golf4 V2”.
www.cardiag.co
.uk
Any questions, please don't hesitate to contact us. Email: [email protected] Skype:cardiag.co.uk [email protected] Yahoo:[email protected] Phone:86-15072360818
⑻Click into “Next”.
www.cardiag.co
.uk
Any questions, please don't hesitate to contact us. Email: [email protected] Skype:cardiag.co.uk [email protected] Yahoo:[email protected] Phone:86-15072360818
⑼Click into “write KM”. Attention: Current KM Value 099984KM. Only allowed to adjust if not existing large error between the original and new mileage.
⑽Write into new mileage and click “ok”.
www.cardiag.co
.uk
Any questions, please don't hesitate to contact us. Email: [email protected] Skype:cardiag.co.uk [email protected] Yahoo:[email protected] Phone:86-15072360818
⑾After hitting the cluster, click “ok”, exit the interface.
⑿Check if it displays the right mileage and disconnect the wiring.
www.cardiag.co
.uk
Any questions, please don't hesitate to contact us. Email: [email protected] Skype:cardiag.co.uk [email protected] Yahoo:[email protected] Phone:86-15072360818