thermal, cut, and abrasion protection tsg-141 seriesastm f1060-08 up to 608of ansi heat level 5...
TRANSCRIPT
Size Cuff Color
Small Yellow
Medium Green
Large White
Extra large Grey
Description:The TSG-141 is a 7 gauge Glove-in-a-Glove. The outer glove is 100% virgin Twaron® and the inner glove is constructed with Nomex®, overcast at the cuff edge to create a single glove system. The TSG-141 includes a 2” cuff (pictured) and the TSG-141-1 features a 4 1/2” cuff. The fingers are bartacked to prevent separation.
Properties: Fit and sizing of the TSG-141 are incremental, providing consistency of product and performance. It performs very well at the highest level of heat testing, 608ºF and is launderable, providing cost saving opportunities.
Recommended: The TSG-141 Glove-in-a-Glove series targets work areas requiring heat, cut, and abrasion protection such as parts handling, stamping, and some plastics departments. For an option with excellent grip and heat dissipation, this glove is also available with high heat silicone dots in the 2” cuff length (TSG-141-SBD) and the 4 1/2” cuff length(TSG-141-1-SBD).
TSG-141 Series
Thermal, Cut, and Abrasion Protection
ASTM F2992-15 1703 gramsCut Level A4
Based on third-party testing
ASTM F1060-08 up to 608oF
ANSI Heat Level 5Based on third-party testing
[email protected] 5th Street Plainville, IN 47568
17
To extend the life of the glove and your investment, purchase this glove with high-heat silicone dots on both sides, which also provides back-of- the hand protection from concussion. Use TSG-141-SBDD for the 2” cuff and TSG-141-1-SBDD for the 4 1/2”