Performance Review Institute • 161 Thorn Hill Road • Warrendale, PA 15086-7527, USA • 724-772-1616 • www.priregistrar.org  

 This is to certify that 

All Metals Processing of Orange County, LLC 8401 Standustrial Street 

Stanton, CA 90680 USA 

is registered as a Single Site quality management system in conformance with  

ISO 9001:2015 and AS9100D  

The audit was conducted in accordance with the requirements of SAE AS9104/1:2012‐01 PRI Registrar is accredited under the ICOP Scheme 

 

Scope of Registration:  

Plating, Painting, Anodizing and Non‐Destructive Testing 

Number: 16‐3018 Issued: 12/29/2016 

Reissued: 01/14/2018 Expires:  12/28/2019 

 

Performance Review Institute (PRI) | 161 Thorn Hill Road | Warrendale, PA 15086-7527

Joseph G. PintoExecutive Vice President and Chief Operating Offi cerJoseph G. Pinto

This certificate is granted and awarded by the authority of the Nadcap Management Council to:

All Metals Processing of Orange County, LLC

8401 Standustrial Ave Stanton, CA 90680-2688

United States

This certificate demonstrates conformance and recognition of accreditation for specific services, aslisted in www.eAuditNet.com on the Qualified Manufacturers List (QML), to the revision in effect at the

time of the audit for:

Chemical Processing

Certificate Number: 3320180969Expiration Date: 31 January 2020

SCOPE OF ACCREDITATION

Chemical Processing

All Metals Processing of Orange County, LLC 8401 Standustrial Ave

Stanton, CA 90680-2688

This certificate expiration is updated based on periodic audits. The current expiration date and scopeof accreditation are listed at: www.eAuditNet.com - Online QML (Qualified Manufacturer Listing).

In recognition of the successful completion of the PRI evaluation process, accreditation is granted to

this facility to perform the following: AC7108 Rev I - Nadcap Audit Criteria for Chemical Processing (to be used on audits on/after21 January 2018) AC7108/01– Painting Dry Film Coatings and Sol Gel as a Preparation for Paint – AC7108/1 must alsobe selected AC7108/02 – Etch Inspection – AC7108/2 must also be selected AC7108/04 – Solution Analysis and Testing – AC7108/4 must also be selected AC7108/08 – Anodizing (Not for Metal Bond) – AC7108/8 must also be selected AC7108/09 – Electroplating and Electroforming – AC7108/9 must also be selected AC7108/10 – Electroless Plating – AC7108/10 must also be selected AC7108/11 – Conversion Coating – AC7108/11 must also be selected AC7108/12 – Acid Cleaning, Descaling, Passivation and Electropolishing – AC7108/12 must also beselected AC7108/15 – Pre–Penetrant Etch – AC7108/15 must also be selected General Cleaning and Pre–Cleaning Alkaline Cleaning (If Titanium Alkaline Cleaning is also carried out then please check ChemicalCleaning – Titanium Cleaning – Alkaline” also) Solvent Cleaning Titanium Cleaning – Alkaline Other Titanium Cleaning Alkaline Ovens Used for Thermal Treatments at a Set Point above 250°F Ovens for Thermal Treatments with a set point at or below 250ºF (121ºC) or for MiscellaneousHeating Processes, e.g. Part Drying. Stripping of Coatings as an Internal Rework Process Inorganic Coatings

t-frm-17 17-Jun-10

Other Stripping Organic Coatings AC7108/1 Rev C - Nadcap Audit Criteria for Painting & Dry Film Coatings (to be used on auditson/after 5 June 2016) Dry Film Lubricant Coatings Other Painting Other Sol Gel AC7108/2 Rev F - Nadcap Audit Criteria for Etch Inspection Processes (Anodic Etch, BlueEtch, Anodize, Local, Macrostructure, Nital/Temper) Nital/Temper Etch Immersion Local Swab Other AC7108/4 Rev C - Nadcap Audit Criteria for Solution Analysis and Testing in Support ofChemical Processing to AC7108 (To Be Used On Audits Conducted On audits on/after 21January 2018) Solution Analysis In Support of AC7108 Testing Performed Internally In Support of the Chemical Process Accreditation B05 – Salt Spray Testing In Support of AC7108 B06 – Water Immersion / Humidity Testing In Support of AC7108 B07 – Heat Resistance Testing In Support of AC7108 B10 – Adhesion Testing (Adhesion Tape Testing) In Support of AC7108 B11 – Adhesion Testing (Scratch and Chisel Test) In Support of AC7108 B12 – Adhesion Testing (Bend Test) In Support of AC7108 B13 – Coating Weight Testing In Support of AC7108 B14 – Conductivity Testing In Support of AC7108 B16 – Coating Thickness Measurement In Support of AC7108 B21 – Paint Color and Gloss Testing In Support of AC7108 B22 – Solvent Resistance Testing In Support of AC7108 B23 – Other Testing In Support of AC7108 AC7108/8 - Nadcap Audit Criteria for Anodizing (Not For Metal Bond) (to be used on auditson/after 5 June 2016) Anodize Aluminum, Chromic Acid Other Anodize Aluminum Anodize Aluminum, Hard Anodize

All Metals Processing of Orange County, LLC #2Stanton, CA

t-frm-17 17-Jun-10

Other Anodize Aluminum Anodize Aluminum, Sulfuric Acid Other Anodize Aluminum Dye Impregnation Seal AC7108/9 - Nadcap Audit Criteria for Electroplating and Electroforming (to be used on auditson/after 5 June 2016) Electroplating Alloy Plating Other Alloy Plating Cadmium Plating Other Cadmium Plating Copper Plating Other – Copper Plating Silver Plating Other Silver Plating Tin Plating AC7108/10 - Nadcap Audit Criteria for Electroless Plating (to be used on audits on/after 5 June2016) Nickel Other Nickel AC7108/11 - Nadcap Audit Criteria for Conversion Coating (to be used on audits on/after 5June 2016) Aluminum Other Aluminum Aluminum, Non–Hexavalent Chrome Alternatives Steel Titanium Other Titanium AC7108/12 - Nadcap Audit Criteria for Acid Cleaning, Descaling, Passivation andElectropolishing (to be used on audits on/after 5 June 2016) Electropolishing Nickel & Cobalt Alloys Steels Other Steels Passivation

All Metals Processing of Orange County, LLC #3Stanton, CA

t-frm-17 17-Jun-10

Other Passivation Titanium Cleaning – Acid (This process also requires “Chemical Cleaning – Titanium Cleaning –Alkaline” to also be checked unless customer specifications permit otherwise) Other Titanium Cleaning Acid AC7108/15 - Nadcap Audit Criteria for Pre-Penetrant Etch (to be used on audits before 9September 2018) Immersion Pre penetrant Etch

All Metals Processing of Orange County, LLC #4Stanton, CA

t-frm-17 17-Jun-10

Performance Review Institute (PRI) | 161 Thorn Hill Road | Warrendale, PA 15086-7527

Joseph G. PintoExecutive Vice President and Chief Operating Offi cerJoseph G. Pinto

This certificate is granted and awarded by the authority of the Nadcap Management Council to:

All Metals Processing of Orange County, LLC

8401 Standustrial Ave Stanton, CA 90680-2688

United States

This certificate demonstrates conformance and recognition of accreditation for specific services, aslisted in www.eAuditNet.com on the Qualified Manufacturers List (QML), to the revision in effect at the

time of the audit for:

NonDestructive Testing

Certificate Number: 3320173385Expiration Date: 31 July 2019

SCOPE OF ACCREDITATION

NonDestructive Testing

All Metals Processing of Orange County, LLC 8401 Standustrial Ave

Stanton, CA 90680-2688

This certificate expiration is updated based on periodic audits. The current expiration date and scopeof accreditation are listed at: www.eAuditNet.com - Online QML (Qualified Manufacturer Listing).

In recognition of the successful completion of the PRI evaluation process, accreditation is granted to

this facility to perform the following: AC7114 Rev K - Nadcap Audit Criteria for NonDestructive Testing (NDT) SuppliersAccreditation (to be used on audits before 31 December 2017) AC7114S Rev L - Nadcap Supplemental Audit Criteria for NonDestructive Testing (NDT)Suppliers Accreditation Program (to be used on audits before 31 December, 2017) S–U1 Honeywell S–U11 The Boeing Company S–U17 Sikorsky S–U8 Airbus AC7114/1 Rev J - Nadcap Audit Criteria for NonDestructive Testing Facility Penetrant Survey(to be used on audits before 31 December 2017) AC7114/1S Rev K - Nadcap Supplemental Audit Criteria for Penetrant Suppliers AccreditationProgram (to be used on audits before 31 December 2017) S–U1 Honeywell S–U11 The Boeing Company S–U17 Sikorsky S–U8 Airbus AC7114/2 Rev J - Nadcap Audit Criteria for NonDestructive Testing Magnetic Particle Survey(to be used on audits before 31 December 2017) AC7114/2S Rev K - Nadcap Supplemental Audit Criteria for NonDestructive Testing MagneticParticle Survey (to be used before 31 December 2017) t-frm-17 17-Jun-10

S–U11 The Boeing Company S–U17 Sikorsky S–U8 Airbus

All Metals Processing of Orange County, LLC #2Stanton, CA

t-frm-17 17-Jun-10

October 04, 2017

RE: Drug & Alcohol Testing Certification of Compliance

BEA CERVANTES

ALL METALS PROCESSING OF ORANGE COUNTY, INC. (FAA)

8401 Standustrial Ave.

Stanton, CA 906804552

All safety sensitive employees, for the period indicated below, are hereinafter referred to as a "consortium

members." These are members of the DrugTestNetwork Consortium, per the United States Department of

Transportation (DOT), FAA.

Period of Coverage 09-25-2017 - 09-28-2018

Consortium members have been placed into a computerized "random selection generator." Periodic

drawings from this generator will result in names of consortium members being randomly selected for drug

and alcohol testing.

At least 25% of the consortium will be selected each calendar year for controlled substance abuse urine

testing.

At least 10% of the consortium will be selected each calendar year for controlled alcohol breath testing.

Consortium members who are selected for testing are responsible for reporting immediately for testing.

Failure to test, or failure to complete a test in a timely fashion, per DOT regulations, will be deemed a

"refusal to test."

All test results will be available to employing agency. All postive tests will be forwarded to the employing

agency.

We remain available to answer your questions or assist you in solving problems as they may arise.

Estik Punangsih

10572 Chestnut St.

Los Alamitos, CA. 90720

562-280-0177 x. 1011