this tool is a quick and easy way to assemble all the components of your fiberbench system. use the...
TRANSCRIPT
This tool is a quick and easy way to assemble all the components of your FiberBench System. Use the various components in the following slides to lay out your design and to help you choose the correct components. See the last slide for inspiration.
How to Use:How to Use: Step 1: Select your FiberBench
Depending on your application, select a single-axis or multi-axis FiberBench (Slide 3) Basic part numbers are included All possible beam paths are drawn in red,
Delete or modify the length/direction of any beam paths by simply clicking on them Input/output FiberPorts are located where the beam exits the FiberBench (not all ports need to be
used) Once you have determined the bench(es) suitable for your application, copy and paste
the bench(es) in the 5th slide, which acts as your work area. Step 2: Choose your Components
The components are broken up into categories for easier selection (Slide 4) A transparent replica is next to most components for easier alignment on the
FiberBench. Beam diagrams are included where necessary for better understanding of function of
part. Basic part numbers are included. A vertical and horizontal part is included for some where applicable, however
components can be rotated also in order to have the proper alignment. Once you have chosen the components of your choice, copy and paste them into the 4 th
blank slide, which acts as your work area. Step 3: Build your system
The 4th slide contains some example systems for your reference. These can be easily deleted or re-configured based on your needs.
NOTE: This tool is meant only for approximation of alignment, and to aid in choosing proper parts for your system. A different program such as SolidWorks should be used to provide more precise dimensioning and alignment of parts.
It is easier to create beam paths without components, therefore leave all beam paths on the bench and delete the paths not needed.
All components are grouped, be sure to click on the outermost corner of the part to ensure you select the entire group of parts.
You can move parts in small increments by pressing down on the Ctrl button on your keyboard and using the arrow keys at the same time. This helps in precise alignments.
Zooming In: Click on the part you wish to zoom in on, THEN zoom in. This keeps the chosen part centered on your screen.
If you cannot see components, the order will have to be changed, click on the component and choose Bring to Front, Bring Forward, Send to Back, etc.
Single Axis
Multiple Axes
Step 1:Choose your Bench
Step 2: Choose your components
Left Handed
FBR-AQ - Rotating ¼ WavePlate
FBR-AH - Rotating ½ WavePlate
FBR - Rotating Linear Polarizer
PBB - Calcite Walk-OffPolarizer
MYOB -VR
½
¼
¼
LP
FBRFBR FBR – ½” Rotating Optic
Mount
Polarization componentsPolarization components
FT-SM05 - ½” optic Mount
H1C – Isolator Mount
HCBHCB HCB - Block mount
HWXYT - Tweaker Module**There is a movable plate on this part which helps to divert the beam path, therefore the plate may extend outside of the box shown here.
PSCLB -VL
PSCLB -VR
MYOB -VL
MYOB -HL
MYOB -HR
MSB -HR
MSB -HL
MSB -VR
MSB -VL
FT-EOMA: EO Modulator mount
Empty MountsEmpty Mounts
Offset Mirror Modules Offset Mirror Modules
Beamsplitter Modules Beamsplitter Modules
FiberPort Coupler/CollimatorFiberPort Coupler/Collimator
PBB
Right Handed
FT-E0MA
½L
P
PB
B
FBR
FBR
HWXYT
HW
XY
T
PSCLB -HL
PSCLB -HR
Polarizing BS cubesPolarizing BS cubes
Step 3: Build your System
Sample FiberBench Systems
PB
B½
PM Variable Optical Attenuator
Coupler, 1x3 Coupler, 2x4
Source 1Source 1Source 2Source 2
HW
XY
T
SM Variable Optical Attenuator(Lateral Misalignment)
PM
Fib
er
PM
Fib
er P
M F
iber P
M F
iber PM
Fib
er
PM
Fib
er P
M F
iber P
M F
iber SM
Fib
er
SM
Fib
er S
M F
iber S
M F
iber
PB
B
Polarization Splitter
1x4 variable coupler(Tweekers make it variable)
Sou
rce
1S
ourc
e 1
HW
XY
T
HWXYT
HWXYT HWXYT Sou
rce
1S
ourc
e 1
LP