thomafluid iii - socochim26424 4 2.5 m 12 x 1.5 32 10 50.00 26425 4 2.5 m 14 x 1.5 32 10 46.00 26426...
TRANSCRIPT
-
Shopping per mouseclickwww.rct-online.de
Thomafluid® iiiConnectors made of plastics
Tubing olive Connectors
Screw Joints for Pipes and Tubings
Quick-Release Coupling Systems
Threaded adapter
antistatic Screw fittings
Tri-Clamp Connections
Reichelt Chemietechnik ’14
Reichelt ChemietechnikGmbh + Co.
-
Studentenkarzer in Heidelberg
Englerstraße 18D-69126 HeidelbergGermanyTel. +49 6221 3125 0Fax +49 6221 3125 10
email:[email protected]:www.rct-online.de
Reichelt ChemietechnikGmbH + Co.
-
THOMAFLUID® III - 2014
Tubing Olive Connectors (I-Ø: 3 - 25 mm) 3 - 19
• made of HDPE, PA, PBT, POM, PP, PP glass fibre reinforced, PTFE, PVDF, TPX • barb unions, glass olive adapters, magic boxes, water flow regulation adapter • straight, reducing, T , Y , cross, elbow, bulkhead partially: with external or internal thread, with collar, detachable • Accessories: lock nuts and gaskets made of PE
Screw Joints for Tubings (I-Ø: 1.6 - 12 mm) 19 - 51
• made of PA, PFA, POM, PP, PP natural, PVDF • for metric and imperial tubing / pipes • straight, reducing, T, cross, elbow, bulkhead, wiveling partially: with external or internal thread
Screw Connections for Fabric Tubing (I-Ø: 4 - 13 mm) 51 - 58
• made of PP and PVDF • straight, T, elbow (partially with external thread)
Screw Joints for Pipes (O-Ø: 0.7 - 25 mm) 58 - 91
• made of PA, PFA, PP, PTFE, PVDF • micro connector, MULTIFIT® connector, pipe connector,
tubing screw joint system for corrugated pipes, accessories • straight, reducing, T, cross, elbow, bulkhead partially: with external or internal thread
Quick-Release Coupling Systems for Pipes (O-Ø: 4 - 32 mm) 91 - 101
• made of glass fibre reinforced Nylon 6.6, nickel-plated brass, PP, acetal• straight, reducing, T, Y, elbow, bulkhead partially: with external or internal thread, with coupling pipe
Inhaltsübersicht nach Werkstoffen (Elastomere) SeiteContent: One-Piece Connectors - Plastics page
-
THOMAFLUID® III - 2014
Content: One-Piece Connectors - Plastics page
Threaded Adapter 101 - 106
• made of HDPE, PA, PFA, POM, PP, PP glass fibre reinforced, PTFE, PVDF• double nipple, threaded sleeve, extension piece,
locking screw, screw cap • straight, reducing, T, elbow partially detachable
Conductive Connector 106 - 112
• made of PP and PVDF• tube connector, pipe connector• straight, elbow partially with external thread
Tri-Clamp Connections 112
• made of PP, PVDF, PFA• tube connector• straight
More Tri-Clamp connectors: see handbook THOMAFLUID® IV
-
THOMAFLUID® III - 2014 3
Fittings - Tubing Olive Connectors (I-Ø: 3 - 25 mm) One-Piece Connectors - Plastics
Fittings
Tubing Olive Connectors (I-Ø: 3 - 25 mm)
THOMAFLUID®-Straight Barb Union made of POM – with hex collar
Cat.-No. For tubing inside Ø Nominal width Unit Price mm mm piece EURO
94175 4 2.7 10 16.0094176 5 3 10 16.0094177 6 4 10 21.0094178 8 5.6 10 21.0026380 10 7 8 28.0026381 12 8.6 8 24.0026382 13 8.6 8 28.0026383 14 10 4 24.0026384 16 12 4 26.0026385 19 15 4 32.00
THOMAFLUID®-Straight Barb Union (reducing) made of POM
Cat.-No. For tubing inside Ø (A)
For tubing inside Ø (B)
Nominal width
Unit Price
mm mm mm piece EURO
94180 6 4 2.7 10 21.0094181 8 4 2.7 10 29.0094182 8 6 4 10 34.0026386 10 6 4 10 46.0026387 10 8 5.6 10 46.0026388 12 8 5.6 10 46.0094909 12 10 7 10 46.00
THOMAFLUID®-T-Shaped Barb Union made of POM
Cat.-No. For tubing inside Ø Nominal width Unit Price mm mm piece EURO
26389 4 2.5 10 21.0026390 5 3 10 23.0026391 6 4 10 29.0026392 8 5.6 10 31.0026393 10 7 8 40.0026394 12 8.6 8 44.0026395 13 9 8 52.0026396 14 10 8 52.0026397 15 11 4 40.0026398 16 12 4 42.0026399 19 15 4 70.00
THOMAFLUID®-T-Shaped Reducing Connector made of POM
Cat.-No. For tubing inside Ø
(A)
For tubing inside Ø
(B)
Nominal width
(A)
Nominal width
(B)
Unit Price
mm mm mm mm piece EURO
26400 4 6 2.5 4 10 34.0026401 6 4 4 2.5 10 34.0026402 8 4 5.6 2.5 10 36.0026403 8 6 5.6 4 10 36.0026404 10 6 7 4 8 36.0026405 10 8 7 5.6 8 44.0026406 12 8 8.6 5.6 4 34.0026407 12 10 8.6 7 4 44.0026408 8 12 5.6 8.6 4 44.0026409 18 15 14 11 4 54.00
-
4 THOMAFLUID® III - 2014
Fittings - Tubing Olive Connectors (I-Ø: 3 - 25 mm) One-Piece Connectors - Plastics
THOMAFLUID®-Y-Shaped Barb Union made of POM
Cat.-No. For tubing inside Ø Nominal width Unit Price mm mm piece EURO
94190 4 2.5 10 21.0094191 5 3 10 26.0094192 6 4 10 44.0094193 8 5.6 10 44.0026410 10 7 8 44.0026411 12 8.6 8 52.0026412 13 9 8 56.0026413 14 10 4 32.0026414 16 12 4 42.0026415 19 15 4 44.00
THOMAFLUID®-Y-Shaped Reducing Connector made of POM
Cat.-No. For tubing inside Ø
(A)
For tubing inside Ø
(B)
Nominal width
(A)
Nominal width
(B)
Unit Price
mm mm mm mm piece EURO
26416 4 6 2.7 4 10 29.0026417 6 8 4 5.6 10 39.00
THOMAFLUID®-Cross Barb Union made of POM
Cat.-No. For tubing inside Ø Nominal width Unit Price mm mm piece EURO
26418 4 2.9 10 31.0026419 5 3 10 39.0026420 6 4 10 44.00
THOMAFLUID®-Magic Box „Laboratory“ made of POM – 40 pieces
Product specification• Connecting pieces and adapters made of POM. Set contains:
20 connectors à 5 pieces each: Cat.-No. 94175-7812 adapters à 4 pieces each: Cat.-No. 94180-828 Y-connectors à 2 pieces each: Cat.-No. 94190-93
Cat.-No. Unit Price piece EURO
94199 1 75.00
THOMAFLUID®-Magic Box „Pilot Plant“ made of POM – 63 pieces
Product specification• Connecting pieces and adapters made of POM. Set contains:
12 connectors à 2 pieces each: Cat.-No. 26380-858 adapters à 2 pieces each: Cat.-No. 26386-88 / 9490912 T-connectors à 2 pieces each: Cat.-No. 26389-9412 T-adapters à 2 pieces each: Cat.-No. 26400-0512 Y-connectors à 2 pieces each: Cat.-No. 26410-154 Y-adapters à 2 pieces each: Cat.-No. 26416-13 Cross connectors à 1 piece each: Cat.-No. 26418-20
Cat.-No. Unit Price piece EURO
942001 1 126.00
THOMAFLUID®-Magic Box „Plant“ made of POM – 71 pieces
Product specification• Connecting pieces and adapters made of POM. Set contains:
20 connectors à 2 pieces each: Cat.-No. 94175-78 / 26380-858 adapters à 2 pieces each: Cat.-No. 26386-88 / 9490912 T-connectors à 2 pieces each: Cat.-No. 26394-9912 T-adapters à 2 pieces each: Cat.-No. 26404-0912 Y-connectors à 2 pieces each: Cat.-No. 26410-154 Y-adapters à 2 pieces each: Cat.-No. 26416-13 Cross connectors à 1 piece each: Cat.-No. 26418-20
Cat.-No. Unit Price piece EURO
942011 1 141.00
THOMAFLUID®-Straight Barb Union made of POM – Bulkhead
Technical specification• Material: POM (polyoxymethylene)• Outfit: with counter nut (nickel-plated brass) for control panel mounting
-
THOMAFLUID® III - 2014 5
Fittings - Tubing Olive Connectors (I-Ø: 3 - 25 mm) One-Piece Connectors - Plastics
• Temperature range: -15 to +80 °C• Bulkhead thread diameter: 12.7 mm• Bulkhead thread length: approx. 10 mm
Cat.-No. For tubing inside Ø Unit Price mm piece EURO
13951 4 3 33.0013952 6.4 3 33.0013953 9.5 3 33.00
THOMAFLUID®-Straight Barb Connector with Male Thread made of POM
Product specification• Male G-thread on one side, hose nozzle on the other side
Cat.-No. For tubing inside Ø
External thread
L l1 l2 Unit Price
mm inch mm mm mm piece EURO
14692 4 G 1/4“ 29 8 17 5 23.0014693 6 G 1/4“ 29 8 17 5 26.0014694 6 G 3/8“ 39 9 22 5 29.0014695 9 G 3/8“ 39 9 22 5 34.0014696 13 G 3/8“ 42 9 25 5 36.00
THOMAFLUID®-Straight Barb Connector with Male Thread made of POM – Bulkhead
Product specification• Male G-thread on one side; hose nozzle on the other side
Cat.-No. For tubing inside Ø
External thread
L l1 l2 Unit Price
mm inch mm mm mm piece EURO
14701 4 G 1/4“ 43 7 8 5 34.0014702 6 G 1/4“ 43 8 8 5 36.00
THOMAFLUID®-Connectors made of PA
General technical specification• Material: PA 6• Temperature range: -10 to +70 °C• Max. operating pressure: 8 bar• Tensile strength: 78 N/mm2 (DIN 53455)• Elongation at break: >50 % (DIN 53455)• Elastic modulus: 3,200 MPa (ISO 527)• Impact toughness: without break (DIN 53453)• Notch impact strength (Charpy): 3 kJ/m2 (ISO 179)• Ball pressure hardness: 160 N/mm2 (ISO 2039-1)
THOMAFLUID®-Straight Barb Connector with Male Thread made of PA
Cat.-No. For tubing inside Ø
Nominal width
Connection type
Length Unit Price
mm mm mm/inch mm piece EURO
26421 4 2.5 M 8 x 1.25 27 10 26.0026422 4 2.5 M 8 x 1 27 10 26.0026423 4 2.5 M 10 x 1 27 10 26.0026424 4 2.5 M 12 x 1.5 32 10 50.0026425 4 2.5 M 14 x 1.5 32 10 46.0026426 4 2.5 R 1/8“ 27 10 31.0026427 4 2.5 R 1/4“ 32 10 31.0026428 4 2.5 NPT 1/8“ 29 10 31.0026429 4 2.5 NPT 1/4“ 35 10 31.0026430 5 3 M 12 x 1.5 36 10 41.0026431 5 3 M 14 x 1.5 36 10 41.0026432 5 3 R 1/4“ 36 6 42.0026433 5 3 NPT 1/4“ 39 6 42.00
-
6 THOMAFLUID® III - 2014
Fittings - Tubing Olive Connectors (I-Ø: 3 - 25 mm) One-Piece Connectors - Plastics
Cat.-No. For tubing inside Ø
Nominal width
Connection type
Length Unit Price
mm mm mm/inch mm piece EURO
26434 6 4 M 10 x 1 33 10 43.0026435 6 4 M 12 x 1.5 38 10 44.0026436 6 4 M 14 x 1.5 37 10 44.0026437 6 4 R 1/8“ 33 10 44.0026438 6 4 R 1/4“ 38 10 44.0026439 6 4 NPT 1/8“ 35 10 44.0026440 6 4 NPT 1/4“ 41 10 44.0026441 8 5.6 M 10 x 1 38 10 44.0026442 8 5.6 M 12 x 1.5 41 10 44.0026443 8 5.6 M 14 x 1.5 41 10 46.0026444 8 5.6 M 18 x 1.5 49 8 48.0026445 8 5.6 M 22 x 1.5 49 8 48.0026446 8 5.6 M 26 x 1.5 49 8 48.0026447 8 5.6 R 1/4“ 41 10 49.0026448 8 5.6 R 3/8“ 41 8 44.0026449 8 5.6 R 1/2“ 49 8 44.0026450 8 5.6 NPT 1/4“ 44 10 44.0026451 10 7 M 12 x 1.5 44 10 49.0026452 10 7 M 14 x 1.5 44 10 49.0026453 10 7 M 16 x 1.5 44 10 49.0026454 10 7 R 1/4“ 44 10 41.0026455 10 7 R 3/8“ 44 10 41.0026456 10 7 NPT 1/4“ 47 10 44.0026457 10 7 NPT 3/8“ 47 10 44.0026458 12 8.6 M 16 x 1.5 46 8 44.0026459 12 8.6 M 18 x 1.5 54 8 44.0026460 12 8.6 M 22 x 1.5 54 8 44.0026461 12 8.6 M 26 x 1.5 54 8 44.0026462 12 8.6 R 3/8“ 46 8 44.0026463 12 8.6 R 1/2“ 54 8 44.0026464 12 8.6 NPT 3/8“ 48 8 44.0026465 14 10 M 18 x 1.5 56 8 44.0026466 14 10 M 20 x 1.5 56 8 44.0026467 14 10 M 22 x 1.5 56 8 44.0026468 14 10 R 1/2“ 56 8 44.0026469 14 10 R 3/8“ 56 8 44.0026470 14 10 NPT 1/2“ 56 8 48.00
THOMAFLUID®-Elbow Barb Connector with Male Thread made of PA
Cat.-No. For tubing inside Ø
Nominal width
Connection type
WAF Unit Price
mm mm mm/inch mm piece EURO
26471 4 2.7 M 8 x 1 10 10 21.0026472 4 2.7 M 10 x 1 10 10 39.0026473 4 2.7 M 12 x 1.5 14 10 41.0026474 4 2.7 M 14 x 1.5 14 10 41.0026475 4 2.7 R 1/8“ 10 10 46.0026476 4 2.7 R 1/4“ 14 10 46.0026477 4 2.7 NPT 1/8“ 10 10 39.0026478 4 2.7 NPT 1/4“ 14 10 39.0026479 6 4 M 10 x 1 10 10 39.0026480 6 4 M 12 x 1.5 14 10 41.0026481 6 4 R 1/8“ 10 10 49.0026482 6 4 R 1/4“ 14 10 36.0026483 6 4 NPT 1/8“ 10 10 36.0026484 6 4 NPT 1/4“ 14 10 36.0026485 8 5.6 M 10 x 1 14 10 52.0026486 8 5.6 M 12 x 1.5 14 10 52.0026487 8 5.6 M 14 x 1.5 14 10 52.0026488 8 5.6 M 18 x 1.5 19 8 56.0026489 8 5.6 M 22 x 1.5 22 8 60.0026490 8 5.6 R 1/4“ 14 10 44.0026491 8 5.6 R 3/8“ 17 10 44.0026492 8 5.6 R 1/2“ 22 10 64.0026493 8 5.6 NPT 1/4“ 14 10 39.0026494 12 8.6 M 16 x 1.5 17 8 48.0026495 12 8.6 M 18 x 1.5 19 8 48.0026496 12 8.6 M 22 x 1.5 22 8 48.0026497 12 8.6 M 26 x 1.5 22 8 48.0026498 12 8.6 R 3/8“ 17 8 48.0026499 12 8.6 R 1/2“ 22 8 56.0026500 12 8.6 NPT 3/8“ 19 8 56.00
THOMAFLUID®-T-Shaped Barb Connector with Male Thread made of PA
Cat.-No. For tubing inside Ø
Nominal width
Connection type
WAF Unit Price
mm mm mm/inch mm piece EURO
26508 4 2.5 M 8 x 1 10 8 64.0026509 4 2.5 M 10 x 1 10 8 64.0026510 4 2.9 M 12 x 1.5 14 8 64.0026511 4 2.5 R 1/8“ 10 10 36.0026512 4 2.5 R 1/4“ 14 10 36.0026513 4 2.5 NPT 1/8“ 10 10 41.00
-
THOMAFLUID® III - 2014 7
Fittings - Tubing Olive Connectors (I-Ø: 3 - 25 mm) One-Piece Connectors - Plastics
Cat.-No. For tubing inside Ø
Nominal width
Connection type
WAF Unit Price
mm mm mm/inch mm piece EURO
26514 4 2.5 NPT 1/4“ 14 8 52.0026501 6 4 M 12 x 1.5 10 10 41.0026502 6 4 M 12 x 1.5 14 10 41.0026503 6 4 R 1/8“ 10 10 41.0026504 6 4 R 1/4“ 14 10 41.0026505 6 4 NPT 1/8“ 10 10 41.0026506 6 4 NPT 1/4“ 14 10 70.0026515 8 5.6 M 12 x 1.5 14 10 46.0026516 8 5.6 M 14 x 1.5 14 10 54.0026517 8 5.6 R 1/4“ 14 10 54.0026518 8 5.6 NPT 1/4“ 14 10 54.00
THOMAFLUID®-Connectors made of TPX
TPX connectors
General product specification• TPX is the trade name for compound PMP (Polymethylpentene).• The material is highly transparent. In contrast to other transparent
resins, it is of remarkable stability combined with high chemical and temperature resistance.
• TPX tubing connectors allow optimal flow control of liquids due to their absolute transparency.
• The material is non-toxic and can be used in food application areas as well as in medicine and biology.
• TRX tubing connectors can be autoclaved several times. They are used at temperatures of -20 to +120 °C.
• TPX tubing connectors have a smooth inner surface producing a constant and reproducible flow rate.
THOMAFLUID®-Straight Barb Union made of TPX
Product specification• Straight, same tubing adapters on both sides
Cat.-No. For tubing inside Ø Unit Price mm piece EURO
28556 3 - 5 5 31.0028557 3 - 5 10 47.0028558 5 - 8 5 38.0028559 5 - 8 10 60.0028560 8 - 15 5 51.0028561 8 - 15 10 79.00
THOMAFLUID®-Straight Barb Union (reducing) made of TPX
Product specification• Straight, but with reducing tubing adapters of different sizes on both
sides.
Cat.-No. For tubing inside Ø (A)
For tubing inside Ø (B)
Unit Price
mm mm piece EURO
28563 3 - 5 5 - 8 5 41.0028564 3 - 5 5 - 8 10 63.0028565 5 - 8 8 - 15 5 56.0028566 5 - 8 8 - 15 10 87.00
THOMAFLUID®-T-Shaped Barb Union made of TPX
Product specification• T-shape, all outlets with tubing adapters of the same size
Cat.-No. For tubing inside Ø Unit Price mm piece EURO
28567 3 - 5 5 41.0028568 3 - 5 10 63.0028569 5 - 8 5 56.0028570 5 - 8 10 87.0028571 8 - 15 5 64.0028572 8 - 15 10 99.00
-
8 THOMAFLUID® III - 2014
Fittings - Tubing Olive Connectors (I-Ø: 3 - 25 mm) One-Piece Connectors - Plastics
THOMAFLUID®-Y-Shaped Barb Union made of TPX
Product specification• Y-shape, all outlets with tubing adapters of the same size
Cat.-No. For tubing inside Ø Unit Price mm piece EURO
28573 3 - 5 5 41.0028574 3 - 5 10 63.0028575 5 - 8 5 56.0028576 5 - 8 10 87.0028577 8 - 15 5 64.0028578 8 - 15 10 99.00
THOMAFLUID®-Straight Barb Union made of HDPE
Product specification• Tubing connections made of natural-coloured, rigid polyethylene
(HDPE)
Cat.-No. For tubing inside Ø
Nominal width
L Unit Price
inch mm mm piece EURO
40744 3/8“ 7 65 10 19.0040745 1/2“ 9 74 10 21.0040746 3/4“ 15 74 10 23.0040747 1“ 20 84 10 30.00
THOMAFLUID®-Straight Barb Union (reducing) made of HDPE
Product specification• Reducing tubing connections made of natural-coloured, rigid polyethy-
lene (HDPE).
Cat.-No. For tubing
inside Ø (A)
Nominal width
(A)
For tubing
inside Ø (B)
Nominal width
(B)
L Unit Price
mm mm mm mm mm piece EURO
40742 19 15 12.7 9 74 10 25.0040743 12.7 9 9.5 7 66 10 25.00
THOMAFLUID®-Straight Barb Connector (reducing) made of HDPE – detachable
Product specification• Screw fitting made of natural-coloured, rigid polyethylene (HDPE)
Cat.-No. For tubing inside Ø
Nominal width
Length Unit Price
inch mm mm piece EURO
40749 3/8“ 7 81 7 35.0040750 1/2“ 9 89.5 7 42.0040751 3/4“ 15 93 7 63.00
THOMAFLUID®-Straight Barb Connector with Male Thread made of HDPE
Product specification• Screw-in threaded joints made of natural-coloured, rigid polyethylene
(HDPE) with male R-thread
-
THOMAFLUID® III - 2014 9
Fittings - Tubing Olive Connectors (I-Ø: 3 - 25 mm) One-Piece Connectors - Plastics
Cat.-No. For tubing inside Ø
Nominal width
External thread
L Unit Price
mm mm inch mm piece EURO
40734 10 7 R 1/2“ 44 10 26.0040735 12 9 R 1/2“ 48 10 30.0040736 12 9 R 3/4“ 50 10 34.0040737 19 15 R 1“ 52 10 40.0040738 25 21 R 5/4“ 64 5 59.0040739 16 13 R 3/4“ 50 5 34.00
THOMAFLUID®-Straight Barb Connector with Female Thread made of HDPE
Product specification• Screw-on threaded joints made of natural-coloured, rigid polyethylene
(HDPE) with cap screw fitting (female R-thread)
Cat.-No. For tubing inside Ø
Nominal width
Internal thread
Length Unit Price
mm mm inch mm piece EURO
40729 10 7 R 1/2“ 46 10 26.0040730 12 9 R 3/4“ 50 10 30.0040731 19 15 R 1“ 52 10 40.0040732 25 21 R 5/4“ 80 5 59.00
THOMAFLUID®-Elbow Barb Connector with Female Thread made of HDPE
Cat.-No. For tubing inside Ø
Nominal width
Internal thread
h Unit Price
mm mm inch mm piece EURO
40716 12 9 R 3/4“ 25 5 23.00407171 12 9 R 3/4“ 32 5 25.00407181 19 14.6 R 1“ 41 5 30.00407191 10 7 R 1/2“ 31 5 23.00
1 with rubber seal
THOMAFLUID®-Glass-Thread Adapter made of PBT
Produktspezifikation:• The screw thread adapters are deliverable for the following products:
Schott (GL 14), Normag (RD 14), and Corning (SQ 13)• The mating hose nozzles are available in two sizes, with outer diame-
ters of 4.5 mm and 9 mm resp.
Technische Spezifikation:• Material: PBT (thermoplastic polyester), dyed, glass fibre reinforced• Max. temperature: +180 °C• Sterilisation: autoclavable
Cat.-No. For tubing inside Ø External thread Unit Price mm piece EURO
40191 4.5 GL14 1 14.0040192 4.5 GL14 5 55.0040193 9 GL14 1 14.0040194 9 GL14 5 55.0040195 4.5 RD14 1 14.0040196 4.5 RD14 5 55.0040197 9 RD14 1 14.0040198 9 RD14 5 55.0040199 4.5 SQ13 1 14.0040200 4.5 SQ13 5 55.0040201 9 SQ13 1 14.0040202 9 SQ13 5 55.00
THOMAFLUID®-Glass Olive Adapter made of PBT
Produktspezifikation:• The glass olive adapters are similar to the screw thread adapters, they
are additionally equipped with a locking ring for mounting on glass olives.
• They are deliverable for the following products: Schott (GL 14), Normag (RD 14), and Corning (SQ 13).
• They are hardly stressed and thus protected. There are no problems with adapting or disconnecting of the adapters, that means no distortion of the tubing.
• The mating hose nozzles are available in two sizes, with outer diame-ters of 4.5 mm and 9 mm resp.
Technische Spezifikation:• Material: PBT (thermoplastic polyester), dyed, glass fibre reinforced• Max. temperature: +180 °C• Sterilisation: autoclavable
-
10 THOMAFLUID® III - 2014
Fittings - Tubing Olive Connectors (I-Ø: 3 - 25 mm) One-Piece Connectors - Plastics
Cat.-No. For tubing inside Ø External thread Unit Price mm piece EURO
40179 4.5 GL14 1 14.0040180 4.5 GL14 5 51.0040181 9 GL14 1 14.0040182 9 GL14 5 51.0040183 4.5 RD14 1 14.0040184 4.5 RD14 5 51.0040185 9 RD14 1 14.0040186 9 RD14 5 51.0040187 4.5 SQ13 1 14.0040188 4.5 SQ13 5 51.0040189 9 SQ13 1 14.0040190 9 SQ13 5 51.00
THOMAFLUID®-Glass Olive Adapter made of PBT – Bulkhead
Product specification• The mounting tubing connector is suitable for dashboards or mounting
walls with 1-10 mm thickness. A mounting hole of 8 mm is required. The tubing connector can be installed without tools and guarantees absolute tightness.
Cat.-No. For tubing inside Ø Unit Price mm piece EURO
40173 4.5 3 51.0040174 4.5 10 118.0040175 4.5 15 141.0040176 9 3 51.0040177 9 10 118.0040178 9 15 141.00
THOMAPLAST®-Straight Barb Union made of PBT – detachable
Product specification• The tubing connectors consist of blue-dyed, glass-fibre reinforced,
thermoplastic polyester (PBT).• The tubing connectors are autoclavable. They are used at temperatu-
res up to max. +180 °C.• Each adapter tubing connector consists of two hose nozzle adapters
and an adapter coupling. The connection of the two hose nozzles by the adapter coupling ensures absolute tightness.
Cat.-No. For tubing inside Ø (A)
For tubing inside Ø (B)
Unit Price
mm mm piece EURO
40167 4.5 4.5 1 21.0040168 4.5 4.5 5 72.0040169 9 9 1 21.0040170 9 9 5 72.0040171 4.5 9 1 21.0040172 4.5 9 5 72.00
THOMAFLUID®-Straight Barb Union made of PP – with collar
Product specification• Tubing connections on both sides
Cat.-No. For tubing inside Ø Nominal width Unit Price mm mm piece EURO
60811 4 - 6 3 10 46.0060812 6 - 8 5 10 46.0060813 8 - 10 7 10 52.0060814 10 - 12 9 10 52.0060815 12 - 14 11 5 31.0060816 14 - 16 13 5 36.00
-
THOMAFLUID® III - 2014 11
Fittings - Tubing Olive Connectors (I-Ø: 3 - 25 mm) One-Piece Connectors - Plastics
THOMAFLUID®-Straight Barb Union made of HDPE – detachable
Product specification• Tubing connections on both sides, two-part
Cat.-No. For tubing inside Ø Unit Price mm piece EURO
60791 3 - 5 8 28.0060792 5 - 7 8 36.0060793 7 - 9 8 40.0060794 9 - 12 8 40.0060795 11 - 14 4 24.0060796 13 - 16 4 30.00
THOMAFLUID®-Straight Barb Union (reducing) made of PP
Product specification• Tubing connections on both sides
Cat.-No. For tubing inside Ø (A)
For tubing inside Ø (B)
Unit Price
mm mm piece EURO
60817 4 - 8 8 - 12 5 23.0060818 4 - 8 12 - 16 5 29.0060819 8 - 12 12 - 16 5 34.00
THOMAFLUID®-Straight Barb Union made of PP/PVDF
Product specification• Tubing connections on both sides• Autoclavable at +121 °C, 20 min.• Suitable for contact with food
Cat.-No. For tubing inside Ø
Nominal width
Material Max. temp.
Unit Price
mm mm °C piece EURO
29363 3 - 4.5 2 PP 135 10 45.0029364 3 - 4.5 2 PVDF 160 10 68.0029365 5 - 6.5 4 PP 135 10 51.0029366 5 - 6.5 4 PVDF 160 10 70.0029367 7 - 8.5 6 PP 135 10 60.0029368 7 - 8.5 6 PVDF 160 10 74.0029369 9 - 10.5 8 PP 135 10 61.0029370 9 - 10.5 8 PVDF 160 10 80.0029371 11 - 12.5 10 PP 135 10 62.0029372 11 - 12.5 10 PVDF 160 10 87.0029373 13 - 14.5 12 PP 135 10 64.0014274 13 - 14.5 12 PVDF 160 10 95.00
THOMAFLUID®-Elbow Barb Union made of PP/PVDF
Product specification• Tubing connections on both sides• Autoclavable at +121 °C, 20 min.• Suitable for contact with food
Cat.-No. For tubing inside Ø
Nominal width
Material Max. temp.
Unit Price
mm mm °C piece EURO
29376 3 - 4.5 2 PP 135 15 48.0029377 3 - 4.5 2 PVDF 160 15 60.0029378 5 - 6.5 4 PP 135 15 48.0029379 5 - 6.5 4 PVDF 160 15 60.0029380 7 - 8.5 6 PP 135 15 51.0029381 7 - 8.5 6 PVDF 160 15 66.0029382 9 - 10.5 8 PP 135 15 57.0029383 9 - 10.5 8 PVDF 160 10 61.0029384 11 - 12.5 10 PP 135 10 45.0029385 11 - 12.5 10 PVDF 160 10 70.0029386 13 - 14.5 12 PP 135 10 58.0029387 13 - 14.5 12 PVDF 160 10 78.00
-
12 THOMAFLUID® III - 2014
Fittings - Tubing Olive Connectors (I-Ø: 3 - 25 mm) One-Piece Connectors - Plastics
THOMAFLUID®-T-Shaped Barb Union made of PP/PVDF
Product specification• Tubing connections on three sides• Autoclavable at +121 °C, 20 min.• Suitable for contact with food
Cat.-No. For tubing inside Ø
Nominal width
Material Max. temp.
Unit Price
mm mm °C piece EURO
29389 3 - 4.5 2 PP 135 15 48.0029390 3 - 4.5 2 PVDF 160 15 60.0029391 5 - 6.5 4 PP 135 15 57.0029392 5 - 6.5 4 PVDF 160 15 63.0029393 7 - 8.5 6 PP 135 10 45.0029394 7 - 8.5 6 PVDF 160 10 61.0029395 9 - 10.5 8 PP 135 10 51.0029396 9 - 10.5 8 PVDF 160 10 62.0029397 11 - 12.5 10 PP 135 10 54.0029398 11 - 12.5 10 PVDF 160 10 64.0029399 13 - 14.5 12 PP 135 10 58.0029400 13 - 14.5 12 PVDF 160 10 70.00
THOMAFLUID®-Y-Shaped Barb Union made of PP/PVDF
Product specification• Tubing connections at three sides• Autoclavable at +121 °C, 20 min.• Suitable for contact with food
Cat.-No. For tubing inside Ø
Nominal width
Material Max. temp.
Unit Price
mm mm °C piece EURO
29402 3 - 5 2 PP 135 10 45.0029403 3 - 5 2 PVDF 160 10 68.0029404 5 - 7 4 PP 135 10 51.0029405 5 - 7 4 PVDF 160 10 70.0029408 7 - 9 6 PP 135 10 61.0029409 7 - 9 6 PVDF 160 10 80.00
Cat.-No. For tubing inside Ø
Nominal width
Material Max. temp.
Unit Price
mm mm °C piece EURO
29410 9 - 11 8 PP 135 10 62.0029411 9 - 11 8 PVDF 160 10 87.0029412 11 - 13 10 PP 135 10 64.0029413 11 - 13 10 PVDF 160 10 100.0029414 13 - 15 12 PP 135 10 76.0029415 13 - 15 12 PVDF 160 10 116.00
THOMAFLUID®-Cross Barb Union made of PP
Product specification• Tubing connections at four sides• Autoclavable at +121 °C, 20 min.• Maximum temperature at +135 °C• Suitable for contact with food
Cat.-No. For tubing inside Ø Nominal width Unit Price mm mm piece EURO
11796 3 - 3.5 2 20 30.0060837 4 - 5.5 3 10 45.0060838 6 - 7.5 5 10 51.0060839 8 - 9.5 7 10 61.0060840 10 - 11.5 9 10 61.0060841 12 - 13.5 11 5 31.00
THOMAFLUID®-Magic Box „Conglomeration“ made of PP – 56 pieces
Product specification• In this 56-piece smorgasbord the right tubing connectors are almost
always to be found:2 universal tubing connectors for tubing of 4-17 mm; reducing adap-ters 4-8/8-12; 4-8/12-16; 8-12/12-16 à 2 pieces each; straight tubing connectors, elbow connectors, T-shaped pieces and Y-shaped pieces à 2 pieces each of the sizes: 4; 6; 8; 10; 12 and 14 mm.
• Shatterproof and transparent• UV-resistant
Technical specification• Material: PP (polypropylene)• Temperature range: -10 to +80 °C• Sterilization: autoclavable (+121 °C)
-
THOMAFLUID® III - 2014 13
Fittings - Tubing Olive Connectors (I-Ø: 3 - 25 mm) One-Piece Connectors - Plastics
Cat.-No. Unit Price piece EURO
93051 1 98.00
THOMAFLUID®-Straight Barb Connectors with Male G-Thread made of PVDF
General product specification• Resistance to alcohols, aldehydes, petrol, benzene and other aromatic
hydrocarbons, chlorine gas, esters, glycols, motor oils, salt solutions, alkalis and acids
General technical specification• Material: PVDF (polyvinylidene fluoride)• Colour: transparent/white• Temperature range: -20 to +120 °C
THOMAFLUID®-Straight Barb Connector with Male Thread made of PVDF
Product specification• Male G-thread on one side, hose nozzle on the other side
Cat.-No. For tubing
inside Ø
Ex-ternal thread
L l1 l2 WAF Unit Price
mm inch mm mm mm mm piece EURO
14707 4 G 1/4“ 29 8 17 14 3 24.0014708 6 G 1/4“ 29 8 17 14 3 27.0014709 6 G 3/8“ 39 9 22 17 3 30.0014710 9 G 3/8“ 39 9 22 17 3 30.0014711 13 G 3/8“ 42 9 25 17 3 33.00
THOMAFLUID®-Straight Barb Connector with Male Thread made of PVDF – Bulkhead
Product specification• Male G-thread on one side, hose nozzle on the other side
Cat.-No. For tubing inside Ø
External thread
L l1 l2 Unit Price
mm inch mm mm mm piece EURO
14716 4 G 1/4“ 43 7 8 2 37.0014717 6 G 1/4“ 43 8 8 2 39.00
THOMAFLUID®-Connectors made of PP/PVDF/PTFE
Application area• Connection of tubing of the same diameter in areas of chemical and
physical laboratory technology, biotechnology, medical engineering, nuclear technology.
• For conveyance of ultrapure media and all kinds of aggressive and dangerous liquids and gases.
General product specification• Solvent and chemically resistant, non-leachable tubing connections,
non-slip fluted nozzles on both sides, construction in one piece without joints, mirror-smooth inner surfaces with low tendency to adhesion, made of application-oriented, sterilizable high-performance polymer materials polytetrafluoroethylene (PTFE), polyvinylidene fluoride (PVDF) or polypropylene (PP).
• For elastic tubing with inside diameters of 4 to 12 mm.
General technical specification• PP (Polypropylene):
Extremely good impact toughness and notch impact strengthHigher hardness and stiffness as well as better resilience than PEThermoforming possibleVery good dielectrical propertiesGood resistance to alcohols, ketones, conc. acids and alkalisNot stable to aromatic hydrocarbons, fats and oils, halogenesAutoclavableResistant to hydrolysisPhysiologically safeColour: greyDensity: 0.90 g/cm3
Temperature range: +5 to +90 °CShore hardness D: 72°Max. operating pressure: 10 barWater absorption: 1013 OhmMelt flow index MFR: 0.3 g/10 min.
• PVDF (Polyvinylidene fluoride):High-quality technical plastic for chemical apparatus and machine building, especially in the petrochemical, metallurgical, pharmaceu-tical, food processing, paper and textile industry as well as in the nuclear technology.High impact toughness even at low temperaturesGood breakdown strengthLow dielectric loss factor
-
14 THOMAFLUID® III - 2014
Fittings - Tubing Olive Connectors (I-Ø: 3 - 25 mm) One-Piece Connectors - Plastics
Highest mechanical stability and stiffnessMeeting highest purity requirementsComply with the guidelines from FDA and USP class VI, additionally PVDF has the KTW approval. Up to +150 °C it is non-toxic and since it has a similar property to glass it is a no-culture medium for microorganisms.Can be treated by autoclave (absolute sterile) and sterilized with gamma-rays without losing its mechanical qualitiesOutstanding resistance to UV, weather and agingFlame-resistantHigh thermal stabilityResistant to alcohols, fats and oils, halogenes, alkalis, acidsNot stable to aromatic hydrocarbons, ketones, amines, pyridine, dimethylformamide, hot alkalis, fuming sulfuric acidColour: nature, slightly translucentDensity: 1.75 g/cm3
Temperature range: -40 to +140 °CShore hardness D: 79°Water absorption: 1013 OhmMelt flow index MFR: 6 g/10 min.
• PTFE (Polytetrafluoroethylene):Heavy-duty plasticAntiadhesive surfaceOutstanding sliding propertiesLowest friction coefficient of all fluorinated plasticsExcellent stress cracking resistanceExcellent weather resistanceHighest gas-tightnessNo water absorptionVery good dielectric properties independent of frequency and temperatureVery good electrical insulating capacity also at air humidityHigh tracking resistanceNon-combustibleColour: milky, whiteDensity: 2.20 g/cm3
Temperature range: -200 to +150 °CShore hardness D: 60°Max. operating pressure: 6 barTearing strength: 30 - 40 N/mm2
Elongation at break: 300 %Water absorption: 0.01 %Surface resistance: >1017 Ohm
THOMAFLUID®-Straight Barb Union made of PP/PVDF/PTFE
Product specification• Tubing connections, non-slip fluted nozzles on both sides, straight way,
construction in one piece without joints, mirror-smooth inner surfaces with low tendency to adhesion
Cat.-No. For tubing inside Ø Material Unit Price mm piece EURO
47303 4 PTFE 3 27.0047304 4 PVDF 3 27.0047305 4 PP 10 59.0047306 6 PTFE 3 36.0047307 6 PVDF 3 36.0047308 6 PP 10 65.0047309 8 PTFE 3 39.0047310 8 PVDF 3 39.0047311 8 PP 10 77.0047312 10 PTFE 3 45.0047313 10 PVDF 3 45.0047314 10 PP 10 120.0047315 12 PTFE 2 54.0047316 12 PVDF 2 54.0047317 12 PP 6 85.00
THOMAFLUID®-T-Shaped Barb Union made of PP/PVDF/PTFE
Product specification• T-shaped tubing connections, orthogonally oriented, non-slip fluted
nozzles, non-restricted port, construction in one piece without joints, mirror-smooth inner surfaces with low tendency to adhesion
Cat.-No. For tubing inside Ø Material Unit Price mm piece EURO
47384 4 PTFE 3 54.0047385 4 PVDF 3 54.0047386 4 PP 10 86.0047387 6 PTFE 3 78.0047388 6 PVDF 3 78.0047389 6 PP 10 134.0047390 8 PTFE 3 105.0047391 8 PVDF 3 105.0047392 8 PP 8 124.0047393 10 PTFE 2 93.0047394 10 PVDF 2 93.0047395 10 PP 6 120.0047396 12 PTFE 2 124.0047397 12 PVDF 2 124.0047398 12 PP 6 150.00
-
THOMAFLUID® III - 2014 15
Fittings - Tubing Olive Connectors (I-Ø: 3 - 25 mm) One-Piece Connectors - Plastics
THOMAFLUID®-Straight Barb Connector with Male Thread made of PP/PVDF/PTFE
Product specification• Screw-in tubing connections, cylindrical male G- or NPT-thread in
commonly used inch sizes on one side, non-slip fluted hose nozzle on the other side, non-restricted port, construction in one piece without joints, mirror-smooth inner surfaces with low tendency to adhesion
Cat.-No. For tubing inside Ø
External thread
Thread length
WAF Mate-rial
Unit Price
mm inch mm mm piece EURO
47399 4 G 1/8“ 8 14 PTFE 3 30.0047400 6 G 1/8“ 8 14 PTFE 3 39.0047401 8 G 1/8“ 8 14 PTFE 3 39.0047540 10 G 1/8“ 8 14 PTFE 3 49.0047402 4 G 1/4“ 12 17 PTFE 3 39.0047403 6 G 1/4“ 12 17 PTFE 3 39.0047404 8 G 1/4“ 12 17 PTFE 3 42.0047405 10 G 1/4“ 12 17 PTFE 3 51.0047406 12 G 1/4“ 12 17 PTFE 2 59.0047407 4 G 3/8“ 12 22 PTFE 3 33.0047408 6 G 3/8“ 12 22 PTFE 3 42.0047409 8 G 3/8“ 12 22 PTFE 3 45.0047410 10 G 3/8“ 12 22 PTFE 3 54.0047411 12 G 3/8“ 12 22 PTFE 2 80.0047412 4 G 1/2“ 14 27 PTFE 3 33.0047413 6 G 1/2“ 14 27 PTFE 3 42.0047414 8 G 1/2“ 14 27 PTFE 3 57.0047415 10 G 1/2“ 14 27 PTFE 3 66.0047416 12 G 1/2“ 14 27 PTFE 2 87.0047417 4 NPT 1/8“ 10 12 PTFE 3 30.0047418 6 NPT 1/8“ 10 12 PTFE 3 39.0047419 8 NPT 1/8“ 10 12 PTFE 3 42.0047420 4 NPT 1/4“ 15 17 PTFE 3 42.0047421 6 NPT 1/4“ 15 17 PTFE 3 42.0047422 8 NPT 1/4“ 15 17 PTFE 3 42.0047423 10 NPT 1/4“ 15 17 PTFE 3 51.0047424 12 NPT 1/4“ 15 17 PTFE 2 60.0047425 4 NPT 3/8“ 15 19 PTFE 3 33.0047426 6 NPT 3/8“ 15 19 PTFE 3 42.0047427 8 NPT 3/8“ 15 19 PTFE 3 45.0047428 10 NPT 3/8“ 15 19 PTFE 3 54.0047429 12 NPT 3/8“ 15 19 PTFE 2 80.0047430 4 NPT 1/2“ 20 24 PTFE 3 33.0047431 6 NPT 1/2“ 20 24 PTFE 3 42.0047432 8 NPT 1/2“ 20 24 PTFE 3 57.0047433 10 NPT 1/2“ 20 24 PTFE 3 66.0047434 12 NPT 1/2“ 20 24 PTFE 2 88.00
Cat.-No. For tubing inside Ø
External thread
Thread length
WAF Mate-rial
Unit Price
mm inch mm mm piece EURO
47435 4 G 1/8“ 8 14 PVDF 3 30.0047436 6 G 1/8“ 8 14 PVDF 3 39.0047437 8 G 1/8“ 8 14 PVDF 3 39.0047541 10 G 1/8“ 8 14 PVDF 3 49.0047438 4 G 1/4“ 12 17 PVDF 3 39.0047439 6 G 1/4“ 12 17 PVDF 3 39.0047440 8 G 1/4“ 12 17 PVDF 3 42.0047441 10 G 1/4“ 12 17 PVDF 3 51.0047442 12 G 1/4“ 12 17 PVDF 2 60.0047443 4 G 3/8“ 12 22 PVDF 3 33.0047444 6 G 3/8“ 12 22 PVDF 3 42.0047445 8 G 3/8“ 12 22 PVDF 3 45.0047446 10 G 3/8“ 12 22 PVDF 3 54.0047447 12 G 3/8“ 12 22 PVDF 2 84.0047448 4 G 1/2“ 14 27 PVDF 3 33.0047449 6 G 1/2“ 14 27 PVDF 3 42.0047450 8 G 1/2“ 14 27 PVDF 3 57.0047451 10 G 1/2“ 14 27 PVDF 3 66.0047452 12 G 1/2“ 14 27 PVDF 2 87.0047453 4 NPT 1/8“ 10 12 PVDF 3 30.0047454 6 NPT 1/8“ 10 12 PVDF 3 39.0047455 8 NPT 1/8“ 10 12 PVDF 3 39.0047456 4 NPT 1/4“ 15 17 PVDF 3 39.0047457 6 NPT 1/4“ 15 17 PVDF 3 39.0047458 8 NPT 1/4“ 15 17 PVDF 3 42.0047459 10 NPT 1/4“ 15 17 PVDF 3 51.0047460 12 NPT 1/4“ 15 17 PVDF 2 60.0047461 4 NPT 3/8“ 15 19 PVDF 3 33.0047462 6 NPT 3/8“ 15 19 PVDF 3 42.0047463 8 NPT 3/8“ 15 19 PVDF 3 45.0047464 10 NPT 3/8“ 15 19 PVDF 3 54.0047465 12 NPT 3/8“ 15 19 PVDF 2 84.0047466 4 NPT 1/2“ 20 24 PVDF 3 33.0047467 6 NPT 1/2“ 20 24 PVDF 3 42.0047468 8 NPT 1/2“ 20 24 PVDF 3 57.0047469 10 NPT 1/2“ 20 24 PVDF 3 66.0047470 12 NPT 1/2“ 20 24 PVDF 2 87.0047471 4 G 1/8“ 8 14 PP 10 36.0047472 6 G 1/8“ 8 14 PP 10 62.0047473 8 G 1/8“ 8 14 PP 10 85.0047542 10 G 1/8“ 8 14 PP 10 99.0047474 4 G 1/4“ 12 17 PP 10 39.0047475 6 G 1/4“ 12 17 PP 10 67.0047476 8 G 1/4“ 12 17 PP 10 87.0047477 10 G 1/4“ 12 17 PP 5 67.0047478 12 G 1/4“ 12 17 PP 5 97.0047479 4 G 3/8“ 12 22 PP 10 80.0047480 6 G 3/8“ 12 22 PP 10 90.0047481 8 G 3/8“ 12 22 PP 10 90.0047482 10 G 3/8“ 12 22 PP 5 57.0047483 12 G 3/8“ 12 22 PP 5 85.0047484 4 G 1/2“ 14 27 PP 10 82.0047485 6 G 1/2“ 14 27 PP 10 90.0047486 8 G 1/2“ 14 27 PP 10 95.0047487 10 G 1/2“ 14 27 PP 5 67.00
-
16 THOMAFLUID® III - 2014
Fittings - Tubing Olive Connectors (I-Ø: 3 - 25 mm) One-Piece Connectors - Plastics
Cat.-No. For tubing inside Ø
External thread
Thread length
WAF Mate-rial
Unit Price
mm inch mm mm piece EURO
47488 12 G 1/2“ 14 27 PP 5 90.0047489 4 NPT 1/8“ 10 12 PP 10 36.0047490 6 NPT 1/8“ 10 12 PP 10 62.0047491 8 NPT 1/8“ 10 12 PP 10 90.0047492 4 NPT 1/4“ 15 17 PP 10 39.0047493 6 NPT 1/4“ 15 17 PP 10 67.0047494 8 NPT 1/4“ 15 17 PP 10 87.0047495 10 NPT 1/4“ 15 17 PP 5 67.0047496 12 NPT 1/4“ 15 17 PP 5 97.0047497 4 NPT 3/8“ 15 19 PP 10 80.0047498 6 NPT 3/8“ 15 19 PP 10 90.0047499 8 NPT 3/8“ 15 19 PP 10 90.0047500 10 NPT 3/8“ 15 19 PP 5 60.0047501 12 NPT 3/8“ 15 19 PP 5 85.0047502 4 NPT 1/2“ 20 24 PP 10 90.0047503 6 NPT 1/2“ 20 24 PP 10 90.0047504 8 NPT 1/2“ 20 24 PP 10 100.0047505 10 NPT 1/2“ 20 24 PP 5 67.0047506 12 NPT 1/2“ 20 24 PP 5 90.00
THOMAFLUID®-Straight Barb Connector with Female Thread made of PP/PVDF/PTFE
Product specification• Screw-on tubing connections, cylindrical female G-thread in commonly
used inch sizes on one side, non-slip fluted hose nozzle on the other side, non-restricted port, construction in one piece without joints, mirror-smooth inner surfaces with low tendency to adhesion.
Cat.-No. For tubing inside Ø
Internal thread
Material Unit Price
mm inch piece EURO
303508 4 G 1/8“ PTFE 3 33.00303509 6 G 1/8“ PTFE 3 42.00303510 8 G 1/8“ PTFE 3 42.00303511 10 G 1/8“ PTFE 3 54.00303512 4 G 1/4“ PTFE 3 36.00303513 6 G 1/4“ PTFE 3 42.00303514 8 G 1/4“ PTFE 3 45.00303515 10 G 1/4“ PTFE 3 54.00303516 12 G 1/4“ PTFE 2 45.00303517 4 G 3/8“ PTFE 3 36.00303518 6 G 3/8“ PTFE 3 45.00303519 8 G 3/8“ PTFE 3 48.00303520 10 G 3/8“ PTFE 3 60.00
Cat.-No. For tubing inside Ø
Internal thread
Material Unit Price
mm inch piece EURO
303521 12 G 3/8“ PTFE 2 66.00303522 4 G 1/2“ PTFE 3 36.00303523 6 G 1/2“ PTFE 3 48.00303524 8 G 1/2“ PTFE 3 63.00303525 10 G 1/2“ PTFE 3 75.00303526 12 G 1/2“ PTFE 2 92.00303527 4 G 1/8“ PVDF 3 33.00303528 6 G 1/8“ PVDF 3 42.00303529 8 G 1/8“ PVDF 3 42.00303530 10 G 1/8“ PVDF 3 54.00303531 4 G 1/4“ PVDF 3 36.00303532 6 G 1/4“ PVDF 3 42.00303533 8 G 1/4“ PVDF 3 45.00303534 10 G 1/4“ PVDF 3 54.00303535 12 G 1/4“ PVDF 2 45.00303536 4 G 3/8“ PVDF 3 36.00303537 6 G 3/8“ PVDF 3 45.00303538 8 G 3/8“ PVDF 3 48.00303539 10 G 3/8“ PVDF 3 60.00303540 12 G 3/8“ PVDF 2 66.00303541 4 G 1/2“ PVDF 3 36.00303542 6 G 1/2“ PVDF 3 48.00303543 8 G 1/2“ PVDF 3 63.00303544 10 G 1/2“ PVDF 3 75.00303545 12 G 1/2“ PVDF 2 92.00303546 4 G 1/8“ PP 10 45.00303547 6 G 1/8“ PP 10 53.00303548 8 G 1/8“ PP 10 60.00303549 10 G 1/8“ PP 5 50.00303550 4 G 1/4“ PP 10 47.00303551 6 G 1/4“ PP 10 55.00303552 8 G 1/4“ PP 10 63.00303553 10 G 1/4“ PP 5 55.00303554 12 G 1/4“ PP 5 75.00303555 4 G 3/8“ PP 10 84.00303556 6 G 3/8“ PP 10 75.00303557 8 G 3/8“ PP 10 79.00303558 10 G 3/8“ PP 5 55.00303559 12 G 3/8“ PP 5 80.00303560 4 G 1/2“ PP 10 74.00303561 6 G 1/2“ PP 10 82.00303562 8 G 1/2“ PP 10 85.00303563 10 G 1/2“ PP 5 60.00303564 12 G 1/2“ PP 5 85.00
THOMAFLUID®-Elbow Barb Connector with Male Thread made of PP/PVDF/PTFE
Product specification• Screw-in tubing connections, cylindrical male G- or NPT-thread in
commonly used inch sizes on one side, non-slip fluted hose nozzle on the other side, non-restricted rectangular port, construction in one piece without joints, mirror-smooth inner surfaces with low tendency to adhesion
-
THOMAFLUID® III - 2014 17
Fittings - Tubing Olive Connectors (I-Ø: 3 - 25 mm) One-Piece Connectors - Plastics
Cat.-No. For tubing inside Ø
External thread
Thread length
Material Unit Price
mm inch mm piece EURO
47543 4 G 1/8“ 8 PTFE 3 42.0047544 6 G 1/8“ 8 PTFE 3 48.0047545 8 G 1/8“ 8 PTFE 3 78.0047546 4 G 1/4“ 12 PTFE 3 45.0047547 6 G 1/4“ 12 PTFE 3 63.0047548 8 G 1/4“ 12 PTFE 3 84.0047549 10 G 1/4“ 12 PTFE 2 84.0047550 12 G 1/4“ 12 PTFE 1 57.0047551 4 G 3/8“ 12 PTFE 3 63.0047552 6 G 3/8“ 12 PTFE 3 75.0047553 8 G 3/8“ 12 PTFE 3 93.0047554 10 G 3/8“ 12 PTFE 2 92.0047555 12 G 3/8“ 12 PTFE 1 59.0047556 4 G 1/2“ 14 PTFE 3 93.0047557 6 G 1/2“ 14 PTFE 3 99.0047558 8 G 1/2“ 14 PTFE 2 80.0047559 10 G 1/2“ 14 PTFE 2 104.0047560 12 G 1/2“ 14 PTFE 1 65.0047561 4 NPT 1/8“ 10 PTFE 3 42.0047562 6 NPT 1/8“ 10 PTFE 3 48.0047563 8 NPT 1/8“ 10 PTFE 3 78.0047564 4 NPT 1/4“ 15 PTFE 3 45.0047565 6 NPT 1/4“ 15 PTFE 3 63.0047566 8 NPT 1/4“ 15 PTFE 3 84.0047567 10 NPT 1/4“ 15 PTFE 2 84.0047568 12 NPT 1/4“ 15 PTFE 1 57.0047569 4 NPT 3/8“ 15 PTFE 3 63.0047570 6 NPT 3/8“ 15 PTFE 3 75.0047571 8 NPT 3/8“ 15 PTFE 3 93.0047572 10 NPT 3/8“ 15 PTFE 2 92.0047573 12 NPT 3/8“ 15 PTFE 1 59.0047574 4 NPT 1/2“ 20 PTFE 3 93.0047575 6 NPT 1/2“ 20 PTFE 3 99.0047576 8 NPT 1/2“ 20 PTFE 2 80.0047577 10 NPT 1/2“ 20 PTFE 2 104.0047578 12 NPT 1/2“ 20 PTFE 1 65.0047579 4 G 1/8“ 8 PVDF 3 42.0047580 6 G 1/8“ 8 PVDF 3 48.0047581 8 G 1/8“ 8 PVDF 3 78.0047582 4 G 1/4“ 12 PVDF 3 48.0047583 6 G 1/4“ 12 PVDF 3 63.0047584 8 G 1/4“ 12 PVDF 3 84.0047585 10 G 1/4“ 12 PVDF 2 84.0047586 12 G 1/4“ 12 PVDF 1 57.0047587 4 G 3/8“ 12 PVDF 3 63.00
Cat.-No. For tubing inside Ø
External thread
Thread length
Material Unit Price
mm inch mm piece EURO
47588 6 G 3/8“ 12 PVDF 3 75.0047589 8 G 3/8“ 12 PVDF 3 93.0047590 10 G 3/8“ 12 PVDF 2 92.0047591 12 G 3/8“ 12 PVDF 1 59.0047592 4 G 1/2“ 14 PVDF 3 93.0047593 6 G 1/2“ 14 PVDF 3 99.0047594 8 G 1/2“ 14 PVDF 2 80.0047595 10 G 1/2“ 14 PVDF 2 104.0047596 12 G 1/2“ 14 PVDF 1 65.0047597 4 NPT 1/8“ 10 PVDF 3 42.0047598 6 NPT 1/8“ 10 PVDF 3 48.0047599 8 NPT 1/8“ 10 PVDF 3 78.0047600 4 NPT 1/4“ 15 PVDF 3 45.0047601 6 NPT 1/4“ 15 PVDF 3 63.0047602 8 NPT 1/4“ 15 PVDF 3 84.0047603 10 NPT 1/4“ 15 PVDF 2 84.0047604 12 NPT 1/4“ 15 PVDF 1 57.0047605 4 NPT 3/8“ 15 PVDF 3 63.0047606 6 NPT 3/8“ 15 PVDF 3 75.0047607 8 NPT 3/8“ 15 PVDF 3 93.0047608 10 NPT 3/8“ 15 PVDF 2 92.0047609 12 NPT 3/8“ 15 PVDF 1 59.0047610 4 NPT 1/2“ 20 PVDF 3 93.0047611 6 NPT 1/2“ 20 PVDF 3 99.0047612 8 NPT 1/2“ 20 PVDF 2 80.0047613 10 NPT 1/2“ 20 PVDF 2 104.0047614 12 NPT 1/2“ 20 PVDF 1 65.0047615 4 G 1/8“ 8 PP 5 57.0047616 6 G 1/8“ 8 PP 5 70.0047617 8 G 1/8“ 8 PP 5 90.0047618 4 G 1/4“ 12 PP 5 55.0047619 6 G 1/4“ 12 PP 5 67.0047620 8 G 1/4“ 12 PP 5 87.0047621 10 G 1/4“ 12 PP 5 95.0047622 12 G 1/4“ 12 PP 5 120.0047623 4 G 3/8“ 12 PP 5 55.0047624 6 G 3/8“ 12 PP 5 57.0047625 8 G 3/8“ 12 PP 5 67.0047626 10 G 3/8“ 12 PP 5 97.0047627 12 G 3/8“ 12 PP 5 126.0047628 4 G 1/2“ 14 PP 5 70.0047629 6 G 1/2“ 14 PP 5 75.0047630 8 G 1/2“ 14 PP 5 85.0047631 10 G 1/2“ 14 PP 5 110.0047632 12 G 1/2“ 14 PP 5 145.0047633 4 NPT 1/8“ 10 PP 5 57.0047634 6 NPT 1/8“ 10 PP 5 70.0047635 8 NPT 1/8“ 10 PP 5 90.0047636 4 NPT 1/4“ 15 PP 5 52.0047637 6 NPT 1/4“ 15 PP 5 70.0047638 8 NPT 1/4“ 15 PP 5 90.0047639 10 NPT 1/4“ 15 PP 5 95.0047640 12 NPT 1/4“ 15 PP 5 120.0047641 4 NPT 3/8“ 15 PP 5 55.0047642 6 NPT 3/8“ 15 PP 5 60.00
-
18 THOMAFLUID® III - 2014
Fittings - Tubing Olive Connectors (I-Ø: 3 - 25 mm) One-Piece Connectors - Plastics
Cat.-No. For tubing inside Ø
External thread
Thread length
Material Unit Price
mm inch mm piece EURO
47643 8 NPT 3/8“ 15 PP 5 70.0047644 10 NPT 3/8“ 15 PP 5 100.0047645 12 NPT 3/8“ 15 PP 5 130.0047646 4 NPT 1/2“ 20 PP 5 70.0047647 6 NPT 1/2“ 20 PP 5 75.0047648 8 NPT 1/2“ 20 PP 5 85.0047649 10 NPT 1/2“ 20 PP 5 110.0047650 12 NPT 1/2“ 20 PP 5 145.00
THOMAFLUID®-Water Flow Regulating Adapter
Product specification• Stabilizer of inconstant water pressure.• The indispensable helper for every lab. If a constant water flow from
the water-supply line is required, the THOMAFLUID®-water regulating adapter is needed.
• It is required for metering of constant water volumes in thermostats and distillation condensers or for liquid level control of water bathes. In contrast to conventional metal connections, the THOMAFLUID®-water regulating adapter offers following advantages:Very simple regulation of the flow valve from outside; no calcification of the adapter; simplest installation at the cock directly, no mainte-nance; no rusting, no greasing; constant and stable water flow when the cock is fully opened; constant water flow rate guaranteed; no coming off of the tube from cock due to overpressure; highest safety. The THOMAFLUID®-water regulating adapter is designed in such a way that water flow is only regulated but never shut off when the check valve is turned. To turn off the water, the cock has to be shut off.
Cat.-No. For tubing inside Ø Internal thread Unit Price inch inch piece EURO
95418 1/2“ R 1/2“ 1 98.00954183 1/2“ R 1/2“ 3 235.00
THOMAFLUID®-Connectors made of PP (glass fibre reinforced) - macro
General technical specification• Housing: light-grey, made of glass fibre reinforced PP (polypropylene)• Max. operating pressure: 10 bar at +20 °C• Temperature range: 0 to +80 °C• Sterilization: autoclavable at +121 °C
THOMAFLUID®-Straight Barb Connector with Male Thread made of PP – macro
Product specification• Hose Nozzle with cylindrical male G-thread
Cat.-No. For tubing inside Ø
External thread
d L WAF Unit Price
mm inch mm mm mm piece EURO
14297 13 G 1/2“ 8.5 55 21 10 36.0014298 16 G 1/2“ 10.5 63 21 10 36.0014299 20 G 1/2“ 15 63.5 24 10 39.0014300 16 G 3/4“ 10.5 46 21 10 41.0014301 12 G 3/4“ 7.5 56 19 10 44.0014302 20 G 3/4“ 15 64 24 10 46.0014303 22 G 1“ 17 69.5 30 10 49.00
THOMAFLUID®-Straight Barb Connector with Female Thread made of PP – macro
Product specification• Hose Nozzle with cylindrical female G-thread with loose cap nut
Cat.-No. For tubing inside Ø
Internal thread
d L Unit Price
mm inch mm mm piece EURO
14304 13 G 1/2“ 9 52 5 34.0014305 16 G 1/2“ 10 61 5 34.0014306 16 G 3/4“ 10 63 5 36.0014307 12 G 3/4“ 7.5 54 5 39.0014308 20 G 3/4“ 13 64 5 41.0014309 25 G 1“ 20 69 5 44.00
THOMAFLUID®-Elbow Barb Connector with Male Thread made of PP – macro
Product specification• Angle hose nozzle with cylindrical male G-thread
-
THOMAFLUID® III - 2014 19
Fittings - Tubing Olive Connectors (I-Ø: 3 - 25 mm) One-Piece Connectors - Plastics
Cat.-No. For tubing inside Ø
External thread
d WAF Unit Price
mm inch mm mm piece EURO
14310 12 G 1/2“ 7.5 19 5 34.0014311 16 G 1/2“ 11 19 5 34.0014312 20 G 1/2“ 15.5 24 5 39.0014313 12 G 3/4“ 7.5 19 5 39.0014314 22 G 3/4“ 17 30 5 39.0014315 22 G 1“ 17 30 5 44.00
THOMAFLUID®-Elbow Barb Connector with Female Thread made of PP – macro
Product specification• Angle hose nozzle with cylindrical female G-thread
Cat.-No. For tubing inside Ø
Internal thread
d WAF Unit Price
mm inch mm mm piece EURO
14316 12 G 1/2“ 7.5 11 5 44.0014317 16 G 3/4“ 11 7 5 49.0014318 12 G 3/4“ 7.5 12 5 49.0014319 20 G 3/4“ 15.7 8 5 52.0014320 22 G 1“ 17 9 5 54.00
RCT®-Accessories: Hexagon Lock Nut made of PE
Cat.-No. Internal thread WAF Unit Price inch mm piece EURO
14332 G 1/2“ 27 10 36.0014333 G 3/4“ 36 10 41.0014334 G 1“ 46 10 54.00
RCT®-Accessories: Flat Gasket made of PE
Cat.-No. Suitable for Unit Price piece EURO
14326 internal thread R 1/2“ 5 29.0014327 internal thread R 3/4“ 5 34.0014328 internal thread R 1“ 5 54.0014329 external thread R 1/2“ 5 29.0014330 external thread R 3/4“ 5 34.0014331 external thread R 1“ 5 54.00
Screw Joints for Tubings (I-Ø: 1.6 - 12 mm)
THOMAFLUID®-Screw Joints for Tubings
General product specification• THOMAFLUID®-tubing screw joints are used for connecting flexible
THOMAFLUID®-tubing.• The connecting spigot is nearly cylindrical and dimensioned in such a
way that dilatation of the tubing does not exceed 6 % (referring to the tubing outside diameter) even with unfavourable tolerances.
• The tension of the remaining dilatation achieves tightness of the screw joint also without knurled nut (checked up to 6 bar).
• The locking ring of the screw joints causes the arrestment of the tubing thus preventing effects of shear and torsion forces. Please note that of course the locking ring has to be left in place if the screw joint should be closed by a cover cap.
• The elastic locking ring can be used repeatedly within the same screw joint, which means that the screw joint can be opened and tightly closed again using the same locking ring.
• The locking ring is fitted with a flange serving as a stop. The tube can be pressed only to the point where the flange of the locking ring abuts to the body of the screw joint which causes an additional safety effect.
• This safety effect is given by the fact that the screw joint remains tight even when the connecting spigot is teared off or heavily damaged by any impact. This tightness is caused by the knurled nut pressing in the locking ring into the cone of the screw joint thus producing a seal in the cone. The connecting spigot functions as a carrying bracket, and a carrying bracket has not necessarily to be a fixed component part of the screw joint body.
-
20 THOMAFLUID® III - 2014
Fittings - Screw Joints for Tubings (I-Ø: 1.6 - 12 mm) One-Piece Connectors - Plastics
General technical specification• PA (Polyamide):
High HardnessGood impact toughnessHigh dimensional stability and wear-resistanceGood resistance to oils, greases and lubricants, as well as weak alkalis. Not resistant to mineral acids, strong organic acids, oxidants and phenols.Colour: light-greyDensity: 1.1 g/cm3
Temperature range: -20 to +60 °CWater absorption: 9 - 10 %Tensile strength: 40 - 80 N/mm2
Elongation at break: 60 %Surface resistance: >1010 Ohm
• PP (Polypropylene):Extremely good impact toughness and notch impact strengthHigher hardness and stiffness as well as better resilience than PEThermoforming possibleVery good dielectrical propertiesGood resistance to alcohols, ketones, conc. acids and alkalisNot stable to aromatic hydrocarbons, fats and oils, halogenesAutoclavableResistant to hydrolysisPhysiologically safeColour: greyDensity: 0.90 g/cm3
Temperature range: +5 to +90 °CShore hardness D: 72°Max. operating pressure: 10 barWater absorption: 1013 OhmMelt flow index MFR: 0.3 g/10 min.
• PVDF (Polyvinylidene fluoride):High-quality technical plastic for chemical apparatus and machine building, especially in the petrochemical, metallurgical, pharmaceu-tical, food processing, paper and textile industry as well as in the nuclear technology.High impact toughness even at low temperaturesGood breakdown strengthLow dielectric loss factorHighest mechanical stability and stiffnessMeeting highest purity requirementsComply with the guidelines from FDA and USP class VI, additionally PVDF has the KTW approval. Up to +150 °C it is non-toxic and since it has a similar property to glass it is a no-culture medium for microorganisms.Can be treated by autoclave (absolute sterile) and sterilized with gamma-rays without losing its mechanical qualitiesOutstanding resistance to UV, weather and agingFlame-resistantHigh thermal stabilityResistant to alcohols, fats and oils, halogenes, alkalis, acidsNot stable to aromatic hydrocarbons, ketones, amines, pyridine, dimethylformamide, hot alkalis, fuming sulfuric acidColour: nature, slightly translucentDensity: 1.75 g/cm3
Temperature range: -40 to +140 °CShore hardness D: 79°Water absorption: 1013 OhmMelt flow index MFR: 6 g/10 min.
EMP-3 tubing connection principle
THOMAFLUID®-Straight Connector made of PA/PP/PVDF
Product specification• Straight, tubing connection on both sides
Cat.-No. NW L WAF Material Unit Price mm mm mm piece EURO
20024 4/6 39 14 PA 10 26.0020025 4/6 39 14 PP 10 52.0020026 4/6 39 14 PVDF 5 82.0020027 6/8 47 19 PA 10 57.0020028 6/8 47 19 PP 10 69.0020029 6/8 47 19 PVDF 5 101.0020030 6/10 53 22 PA 10 69.0020031 6/10 53 22 PP 10 75.0020032 6/10 53 22 PVDF 5 101.0020033 8/10 53 19 PA 10 79.0020034 8/10 53 19 PP 10 86.0020035 8/10 53 19 PVDF 5 126.0020036 8/12 58 24 PA 10 121.0020037 8/12 58 24 PP 10 151.0020038 8/12 58 24 PVDF 5 151.0020039 10/14 62 24 PA 5 100.0020040 10/14 62 24 PP 5 120.0020041 10/14 62 24 PVDF 5 160.00
THOMAFLUID®-Straight Connector made of PA/PP/PVDF – Bulkhead
Product specification• Straight, tubing connection on both sides, control panel mounting
-
THOMAFLUID® III - 2014 21
Fittings - Screw Joints for Tubings (I-Ø: 1.6 - 12 mm) One-Piece Connectors - Plastics
Cat.-No. NW l L1 WAF Material Unit Price mm mm mm mm piece EURO
20060 4/6 9 53 14 PA 10 50.0020061 4/6 9 53 14 PP 10 62.0020062 4/6 9 53 14 PVDF 5 95.0020063 6/8 9 64 19 PA 10 54.0020064 6/8 9 64 19 PP 10 79.0020065 6/8 9 64 19 PVDF 5 141.0020066 6/10 10 73 22 PA 10 80.0020067 6/10 10 73 22 PP 10 100.0020068 6/10 10 73 22 PVDF 5 151.0020069 8/10 10 73 22 PA 10 65.0020070 8/10 10 73 22 PP 10 102.0020071 8/10 10 73 22 PVDF 5 151.0020072 8/12 12 84 24 PA 10 117.0020073 8/12 12 84 24 PP 10 172.0020074 8/12 12 84 24 PVDF 5 182.0020075 10/14 14 98 27 PA 5 110.0020076 10/14 14 98 27 PP 5 150.0020077 10/14 14 98 27 PVDF 5 205.00
THOMAFLUID®-Straight Connector (reducing) made of PP/PVDF
Product specification• Straight, tubing connection (A) on one side; pipe connection (B) on the
other side
Cat.-No. NW For pipes outside Ø
L WAF Material Unit Price
mm mm mm mm piece EURO
20043 4/6 6 42 17 PP 10 62.0020044 4/6 6 42 17 PVDF 5 150.0020046 6/8 8 47 19 PP 10 79.0020047 6/8 8 47 19 PVDF 5 163.0020049 6/10 8 52 22 PP 10 100.0020050 6/10 8 52 22 PVDF 5 184.00
Cat.-No. NW For pipes outside Ø
L WAF Material Unit Price
mm mm mm mm piece EURO
20052 8/10 10 52 22 PP 10 133.0020053 8/10 10 52 22 PVDF 5 184.0020055 8/12 12 56 24 PP 10 160.0020056 8/12 12 56 24 PVDF 5 194.0020058 10/14 14 59 27 PP 10 160.0020059 10/14 14 59 27 PVDF 5 202.00
THOMAFLUID®-Straight Connector (reducing) made of PA/PP/PVDF – Bulkhead
Product specification• Straight, tubing connection (A) on one side; pipe connection (B) on the
other side, control panel mounting
Cat.-No. NW For pipes outside Ø
L1 WAF Material Unit Price
mm mm mm mm piece EURO
20080 4/6 6 64 17 PA 10 62.0020081 4/6 6 64 17 PP 10 82.0020082 4/6 6 64 17 PVDF 5 159.0060570 4/6 8 56 17 PA 3 48.0020083 6/8 8 70 19 PA 10 110.0020084 6/8 8 70 19 PP 10 120.0020085 6/8 8 70 19 PVDF 5 197.0020086 6/10 8 78 22 PA 10 170.0020087 6/10 8 78 22 PP 10 190.0020088 6/10 8 78 22 PVDF 5 197.0020089 8/10 10 78 22 PA 10 160.0020090 8/10 10 78 22 PP 10 190.0020091 8/10 10 78 22 PVDF 3 129.0020092 8/12 12 89 24 PA 5 115.0020093 8/12 12 89 24 PP 5 130.0020094 8/12 12 89 24 PVDF 3 144.0020095 10/14 14 98 27 PA 5 125.0020096 10/14 14 98 27 PP 5 132.0020097 10/14 14 98 27 PVDF 3 168.00
THOMAFLUID®-Straight Connector with Male Thread made of PA/PP/PVDF – short
Product specification• Straight, tubing connection on one side; male G- or NPT-thread on the
other side
-
22 THOMAFLUID® III - 2014
Fittings - Screw Joints for Tubings (I-Ø: 1.6 - 12 mm) One-Piece Connectors - Plastics
Cat.-No. NW External thread
l1 WAF Material Unit Price
mm inch mm mm piece EURO
20170 4/6 NPT 1/8“ 10 12 PA 10 31.0020171 4/6 NPT 1/8“ 10 12 PP 10 36.0020172 4/6 NPT 1/8“ 10 12 PVDF 5 82.0020173 4/6 NPT 1/4“ 15 17 PA 10 41.0020174 4/6 NPT 1/4“ 15 17 PP 10 54.0020175 4/6 NPT 1/4“ 15 17 PVDF 5 90.0020176 4/6 NPT 3/8“ 15 19 PA 10 79.0020177 4/6 NPT 3/8“ 15 19 PP 10 99.0020178 4/6 NPT 3/8“ 15 19 PVDF 5 91.0020179 4/6 NPT 1/2“ 20 24 PA 10 86.0020180 4/6 NPT 1/2“ 20 24 PP 10 106.0020181 4/6 NPT 1/2“ 20 24 PVDF 5 93.0020182 6/8 NPT 1/8“ 10 14 PA 10 86.0020183 6/8 NPT 1/8“ 10 14 PP 10 113.0020184 6/8 NPT 1/8“ 10 14 PVDF 5 95.0020185 6/8 NPT 1/4“ 15 17 PA 10 86.0020186 6/8 NPT 1/4“ 15 17 PP 10 113.0020187 6/8 NPT 1/4“ 15 17 PVDF 5 95.0020188 6/8 NPT 3/8“ 15 19 PA 10 90.0020189 6/8 NPT 3/8“ 15 19 PP 10 113.0020190 6/8 NPT 3/8“ 15 19 PVDF 5 99.0020191 6/8 NPT 1/2“ 20 24 PA 10 96.0020192 6/8 NPT 1/2“ 20 24 PP 10 115.0020193 6/8 NPT 1/2“ 20 24 PVDF 5 102.0020194 6/10 NPT 1/8“ 10 19 PA 10 100.0020195 6/10 NPT 1/8“ 10 19 PP 10 120.0020196 6/10 NPT 1/8“ 10 19 PVDF 5 104.0020197 6/10 NPT 1/4“ 15 19 PA 10 100.0020198 6/10 NPT 1/4“ 15 19 PP 10 116.0020199 6/10 NPT 1/4“ 15 19 PVDF 5 104.0020200 6/10 NPT 3/8“ 15 19 PA 10 100.0020201 6/10 NPT 3/8“ 15 19 PP 10 120.0020202 6/10 NPT 3/8“ 15 19 PVDF 5 104.0020203 6/10 NPT 1/2“ 20 24 PA 10 99.0020204 6/10 NPT 1/2“ 20 24 PP 10 130.0020205 6/10 NPT 1/2“ 20 24 PVDF 5 110.0020206 8/10 NPT 1/8“ 10 19 PA 10 99.0020207 8/10 NPT 1/8“ 10 19 PP 10 104.0020208 8/10 NPT 1/8“ 10 19 PVDF 5 109.0020209 8/10 NPT 1/4“ 15 19 PA 10 99.0020210 8/10 NPT 1/4“ 15 19 PP 10 109.0020211 8/10 NPT 1/4“ 15 19 PVDF 5 104.0020212 8/10 NPT 3/8“ 15 19 PA 10 100.0020213 8/10 NPT 3/8“ 15 19 PP 10 115.0020214 8/10 NPT 3/8“ 15 19 PVDF 5 106.00
Cat.-No. NW External thread
l1 WAF Material Unit Price
mm inch mm mm piece EURO
20215 8/10 NPT 1/2“ 20 24 PA 10 107.0020216 8/10 NPT 1/2“ 20 24 PP 10 120.0020217 8/10 NPT 1/2“ 20 24 PVDF 5 123.0020218 8/12 NPT 1/8“ 10 22 PA 10 120.0020219 8/12 NPT 1/8“ 10 22 PP 10 130.0020220 8/12 NPT 1/8“ 10 22 PVDF 5 126.0020221 8/12 NPT 1/4“ 15 22 PA 10 130.0020222 8/12 NPT 1/4“ 15 22 PP 10 136.0020223 8/12 NPT 1/4“ 15 22 PVDF 5 131.0020224 8/12 NPT 3/8“ 15 22 PA 10 140.0020225 8/12 NPT 3/8“ 15 22 PP 10 150.0020226 8/12 NPT 3/8“ 15 22 PVDF 5 133.0020227 8/12 NPT 1/2“ 20 24 PA 10 147.0020228 8/12 NPT 1/2“ 20 24 PP 10 152.0020229 8/12 NPT 1/2“ 20 24 PVDF 5 148.0020230 10/14 NPT 1/8“ 10 22 PA 10 170.0020231 10/14 NPT 1/8“ 10 22 PP 10 180.0020232 10/14 NPT 1/8“ 10 22 PVDF 5 155.0020233 10/14 NPT 1/4“ 15 22 PA 10 170.0020234 10/14 NPT 1/4“ 15 22 PP 10 178.0020235 10/14 NPT 1/4“ 15 22 PVDF 5 157.0020236 10/14 NPT 3/8“ 15 22 PA 10 130.0020237 10/14 NPT 3/8“ 15 22 PP 10 184.0020238 10/14 NPT 3/8“ 15 22 PVDF 5 157.0020239 10/14 NPT 1/2“ 20 24 PA 10 190.0020240 10/14 NPT 1/2“ 20 24 PP 10 197.0020241 10/14 NPT 1/2“ 20 24 PVDF 5 163.0020242 4/6 G 1/8“ 8 14 PA 10 36.0020243 4/6 G 1/8“ 8 14 PP 10 41.0020244 4/6 G 1/8“ 8 14 PVDF 5 85.0020245 4/6 G 1/4“ 12 17 PA 10 36.0020246 4/6 G 1/4“ 12 17 PP 10 46.0020247 4/6 G 1/4“ 12 17 PVDF 5 100.0020248 4/6 G 3/8“ 12 22 PA 10 87.0020249 4/6 G 3/8“ 12 22 PP 10 107.0020250 4/6 G 3/8“ 12 22 PVDF 5 93.0020251 4/6 G 1/2“ 14 27 PA 10 96.0020252 4/6 G 1/2“ 14 27 PP 10 116.0020253 4/6 G 1/2“ 14 27 PVDF 5 104.0020254 6/8 G 1/8“ 8 14 PA 10 96.0020255 6/8 G 1/8“ 8 14 PP 10 116.0020256 6/8 G 1/8“ 8 14 PVDF 5 104.0020257 6/8 G 1/4“ 12 17 PA 10 96.0020258 6/8 G 1/4“ 12 17 PP 10 116.0020259 6/8 G 1/4“ 12 17 PVDF 5 109.0020260 6/8 G 3/8“ 12 22 PA 10 99.0020261 6/8 G 3/8“ 12 22 PP 10 116.0020262 6/8 G 3/8“ 12 22 PVDF 5 120.0020263 6/8 G 1/2“ 14 27 PA 10 99.0020264 6/8 G 1/2“ 14 27 PP 10 126.0020265 6/8 G 1/2“ 14 27 PVDF 5 121.0020266 6/10 G 1/8“ 8 19 PA 10 99.0020267 6/10 G 1/8“ 8 19 PP 10 126.0020268 6/10 G 1/8“ 8 19 PVDF 5 121.0020269 6/10 G 1/4“ 12 19 PA 10 99.00
-
THOMAFLUID® III - 2014 23
Fittings - Screw Joints for Tubings (I-Ø: 1.6 - 12 mm) One-Piece Connectors - Plastics
Cat.-No. NW External thread
l1 WAF Material Unit Price
mm inch mm mm piece EURO
20270 6/10 G 1/4“ 12 19 PP 10 126.0020271 6/10 G 1/4“ 12 19 PVDF 5 121.0020272 6/10 G 3/8“ 12 22 PA 10 104.0020273 6/10 G 3/8“ 12 22 PP 10 126.0020274 6/10 G 3/8“ 12 22 PVDF 5 121.0020275 6/10 G 1/2“ 14 27 PA 10 104.0020276 6/10 G 1/2“ 14 27 PP 10 133.0020277 6/10 G 1/2“ 14 27 PVDF 5 132.0020278 8/10 G 1/8“ 8 19 PA 10 104.0020279 8/10 G 1/8“ 8 19 PP 10 133.0020280 8/10 G 1/8“ 8 19 PVDF 5 132.0020281 8/10 G 1/4“ 12 19 PA 10 104.0020282 8/10 G 1/4“ 12 19 PP 10 133.0020283 8/10 G 1/4“ 12 19 PVDF 5 132.0020284 8/10 G 3/8“ 12 22 PA 10 104.0020285 8/10 G 3/8“ 12 22 PP 10 133.0020286 8/10 G 3/8“ 12 22 PVDF 5 132.0020287 8/10 G 1/2“ 14 27 PA 10 107.0020288 8/10 G 1/2“ 14 27 PP 10 133.0020289 8/10 G 1/2“ 14 27 PVDF 5 132.0020290 8/12 G 1/8“ 8 22 PA 10 107.0020291 8/12 G 1/8“ 8 22 PP 10 145.0020292 8/12 G 1/8“ 8 22 PVDF 5 134.0020293 8/12 G 1/4“ 12 22 PA 10 113.0020294 8/12 G 1/4“ 12 22 PP 10 164.0020295 8/12 G 1/4“ 12 22 PVDF 5 139.0020296 8/12 G 3/8“ 12 22 PA 10 118.0020297 8/12 G 3/8“ 12 22 PP 10 164.0020298 8/12 G 3/8“ 12 22 PVDF 5 148.0020299 8/12 G 1/2“ 14 27 PA 10 123.0020300 8/12 G 1/2“ 14 27 PP 10 187.0020301 8/12 G 1/2“ 14 27 PVDF 5 172.0020302 10/14 G 1/8“ 8 22 PA 10 138.0020303 10/14 G 1/8“ 8 22 PP 10 202.0020304 10/14 G 1/8“ 8 22 PVDF 5 176.0020305 10/14 G 1/4“ 12 22 PA 10 149.0020306 10/14 G 1/4“ 12 22 PP 10 229.0020307 10/14 G 1/4“ 12 22 PVDF 5 183.0020308 10/14 G 3/8“ 12 22 PA 10 154.0020309 10/14 G 3/8“ 12 22 PP 10 238.0020310 10/14 G 3/8“ 12 22 PVDF 3 171.0020311 10/14 G 1/2“ 14 27 PA 10 192.0020312 10/14 G 1/2“ 14 27 PP 10 246.0020313 10/14 G 1/2“ 14 27 PVDF 3 198.00
THOMAFLUID®-Straight Connector with Male Thread made of PA/PP/PVDF – long
Product specification• Straight, tubing connection on one side; male G-thread on the other
side; long model
Cat.-No. NW External thread
l1 L1 Material Unit Price
mm inch mm mm piece EURO
20368 4/6 G 1/8“ 8 39 PA 10 55.0020369 4/6 G 1/8“ 8 39 PP 10 79.0020370 4/6 G 1/8“ 8 39 PVDF 5 109.0020371 4/6 G 1/4“ 12 41 PA 10 48.0020372 4/6 G 1/4“ 12 41 PP 10 74.0020373 4/6 G 1/4“ 12 41 PVDF 5 103.0020374 4/6 G 3/8“ 12 43 PA 10 90.0020375 4/6 G 3/8“ 12 43 PP 10 93.0020376 4/6 G 3/8“ 12 43 PVDF 5 115.0020377 4/6 G 1/2“ 14 46 PA 10 110.0020378 4/6 G 1/2“ 14 46 PP 10 123.0020379 4/6 G 1/2“ 14 46 PVDF 5 119.0020380 6/8 G 1/8“ 8 44 PA 10 110.0020381 6/8 G 1/8“ 8 44 PP 10 130.0020382 6/8 G 1/8“ 8 44 PVDF 5 125.0020383 6/8 G 1/4“ 12 45 PA 10 110.0020384 6/8 G 1/4“ 12 45 PP 10 119.0020385 6/8 G 1/4“ 12 45 PVDF 5 122.0020386 6/8 G 3/8“ 12 47 PA 10 119.0020387 6/8 G 3/8“ 12 47 PP 10 116.0020388 6/8 G 3/8“ 12 47 PVDF 5 123.0020389 6/8 G 1/2“ 14 50 PA 10 119.0020390 6/8 G 1/2“ 14 50 PP 10 132.0020391 6/8 G 1/2“ 14 50 PVDF 5 127.00
THOMAFLUID®-Straight Connector with Male Thread made of PA/PP/PVDF – Bulkhead
Product specification• Straight, tubing connection on one side; male G-thread on the other side
-
24 THOMAFLUID® III - 2014
Fittings - Screw Joints for Tubings (I-Ø: 1.6 - 12 mm) One-Piece Connectors - Plastics
Cat.-No. NW External thread
l1 L1 Material Unit Price
mm inch mm mm piece EURO
20314 4/6 G 1/4“ 12 37 PA 10 52.0020315 4/6 G 1/4“ 12 37 PP 10 79.0020316 4/6 G 1/4“ 12 37 PVDF 5 109.0020317 4/6 G 3/8“ 12 41 PA 10 110.0020318 4/6 G 3/8“ 12 41 PP 10 120.0020319 4/6 G 3/8“ 12 41 PVDF 5 121.0020320 4/6 G 1/2“ 14 43 PA 10 120.0020321 4/6 G 1/2“ 14 43 PP 10 127.0020322 4/6 G 1/2“ 14 43 PVDF 5 125.0020323 6/8 G 1/4“ 12 45 PA 10 118.0020324 6/8 G 1/4“ 12 45 PP 10 127.0020325 6/8 G 1/4“ 12 45 PVDF 5 126.0020326 6/8 G 3/8“ 12 46 PA 10 130.0020327 6/8 G 3/8“ 12 46 PP 10 130.0020328 6/8 G 3/8“ 12 46 PVDF 5 127.0020329 6/8 G 1/2“ 14 48 PA 10 130.0020330 6/8 G 1/2“ 14 48 PP 10 140.0020331 6/8 G 1/2“ 14 48 PVDF 5 130.0020332 6/10 G 1/4“ 12 50 PP 10 130.0020333 6/10 G 1/4“ 12 50 PA 10 140.0020334 6/10 G 1/4“ 12 50 PVDF 5 130.0020335 6/10 G 3/8“ 12 51 PP 10 125.0020336 6/10 G 3/8“ 12 51 PA 10 140.0020337 6/10 G 3/8“ 12 51 PVDF 5 135.0020338 6/10 G 1/2“ 14 53 PA 10 130.0020339 6/10 G 1/2“ 14 53 PP 10 136.0020340 6/10 G 1/2“ 14 53 PVDF 5 135.0020341 8/10 G 1/4“ 12 50 PA 10 130.0020342 8/10 G 1/4“ 12 50 PP 10 140.0020343 8/10 G 1/4“ 12 50 PVDF 5 136.0020344 8/10 G 3/8“ 12 51 PA 10 130.0020345 8/10 G 3/8“ 12 51 PP 10 140.0020346 8/10 G 3/8“ 12 51 PVDF 5 140.0020347 8/10 G 1/2“ 14 53 PA 10 140.0020348 8/10 G 1/2“ 14 53 PP 10 150.0020349 8/10 G 1/2“ 14 53 PVDF 5 155.0020350 8/12 G 1/4“ 12 58 PA 10 160.0020351 8/12 G 1/4“ 12 58 PP 10 170.0020352 8/12 G 1/4“ 12 58 PVDF 5 140.0020353 8/12 G 3/8“ 12 59 PA 10 170.0020354 8/12 G 3/8“ 12 59 PP 10 180.0020355 8/12 G 3/8“ 12 59 PVDF 5 170.0020356 8/12 G 1/2“ 14 60 PA 10 200.0020357 8/12 G 1/2“ 14 60 PP 10 199.0020358 8/12 G 1/2“ 14 60 PVDF 5 200.0020359 10/14 G 1/4“ 12 67 PA 10 210.0020360 10/14 G 1/4“ 12 67 PP 10 213.0020361 10/14 G 1/4“ 12 67 PVDF 5 205.0020362 10/14 G 3/8“ 12 68 PA 10 230.0020363 10/14 G 3/8“ 12 68 PP 10 230.0020364 10/14 G 3/8“ 12 68 PVDF 3 186.0020365 10/14 G 1/2“ 14 68 PA 10 250.0020366 10/14 G 1/2“ 14 68 PP 10 272.0020367 10/14 G 1/2“ 14 68 PVDF 3 195.00
THOMAFLUID®-Straight Connector with Female Thread made of PA/PP/PVDF
Product specification• Straight, tubing connection on one side, female G-thread on the other
side
Cat.-No. NW Internal thread
l1 L Material Unit Price
mm inch mm mm piece EURO
20392 4/6 G 1/8“ 10 30 PA 10 62.0020393 4/6 G 1/8“ 10 30 PP 10 77.0020394 4/6 G 1/8“ 10 30 PVDF 5 87.0020395 4/6 G 1/4“ 15 36 PA 10 108.0020396 4/6 G 1/4“ 15 36 PP 10 121.0020397 4/6 G 1/4“ 15 36 PVDF 5 90.0061605 4/6 G 1/4“ 15 36 PTFE 1 28.0020398 4/6 G 3/8“ 15 36 PA 10 110.0020399 4/6 G 3/8“ 15 36 PP 10 121.0020400 4/6 G 3/8“ 15 36 PVDF 5 87.0020401 4/6 G 1/2“ 16 37 PA 10 110.0020402 4/6 G 1/2“ 16 37 PP 10 128.0020403 4/6 G 1/2“ 16 37 PVDF 5 92.0020404 6/8 G 1/8“ 10 31 PA 10 110.0020405 6/8 G 1/8“ 10 31 PP 10 128.0020406 6/8 G 1/8“ 10 31 PVDF 5 92.0020407 6/8 G 1/4“ 15 37 PA 10 110.0020408 6/8 G 1/4“ 15 37 PP 10 128.0020409 6/8 G 1/4“ 15 37 PVDF 5 92.0020410 6/8 G 3/8“ 15 37 PA 10 110.0020411 6/8 G 3/8“ 15 37 PP 10 128.0020412 6/8 G 3/8“ 15 37 PVDF 5 92.0020413 6/8 G 1/2“ 16 39 PA 10 110.0020414 6/8 G 1/2“ 16 39 PP 10 128.0020415 6/8 G 1/2“ 16 39 PVDF 5 92.0020416 6/10 G 1/8“ 10 34 PA 10 110.0020417 6/10 G 1/8“ 10 34 PP 10 130.0020418 6/10 G 1/8“ 10 34 PVDF 5 92.0020419 6/10 G 1/4“ 15 40 PA 10 110.0020420 6/10 G 1/4“ 15 40 PP 10 130.0020421 6/10 G 1/4“ 15 40 PVDF 5 92.0020422 6/10 G 3/8“ 15 40 PA 10 110.0020423 6/10 G 3/8“ 15 40 PP 10 130.0020424 6/10 G 3/8“ 15 40 PVDF 5 92.0020425 6/10 G 1/2“ 16 41 PA 10 130.0020426 6/10 G 1/2“ 16 41 PP 10 150.0020427 6/10 G 1/2“ 16 41 PVDF 5 120.0020428 8/10 G 1/8“ 10 36 PA 10 130.00
-
THOMAFLUID® III - 2014 25
Fittings - Screw Joints for Tubings (I-Ø: 1.6 - 12 mm) One-Piece Connectors - Plastics
Cat.-No. NW Internal thread
l1 L Material Unit Price
mm inch mm mm piece EURO
20429 8/10 G 1/8“ 10 36 PP 10 150.0020430 8/10 G 1/8“ 10 36 PVDF 5 120.0020431 8/10 G 1/4“ 15 41 PA 10 130.0020432 8/10 G 1/4“ 15 41 PP 10 148.0020433 8/10 G 1/4“ 15 41 PVDF 5 117.0020434 8/10 G 3/8“ 15 41 PA 10 130.0020435 8/10 G 3/8“ 15 41 PP 10 148.0020436 8/10 G 3/8“ 15 41 PVDF 5 117.0020437 8/10 G 1/2“ 16 43 PA 10 130.0020438 8/10 G 1/2“ 16 43 PP 10 148.0020439 8/10 G 1/2“ 16 43 PVDF 5 117.0020440 8/12 G 1/4“ 15 41 PA 10 160.0020441 8/12 G 1/4“ 15 41 PP 10 160.0020442 8/12 G 1/4“ 15 41 PVDF 5 120.0020443 8/12 G 3/8“ 15 41 PA 10 150.0020444 8/12 G 3/8“ 15 41 PP 10 160.0020445 8/12 G 3/8“ 15 41 PVDF 5 120.0020446 8/12 G 1/2“ 16 43 PA 10 150.0020447 8/12 G 1/2“ 16 44 PP 10 160.0020448 8/12 G 1/2“ 16 43 PVDF 5 120.0020449 10/14 G 1/4“ 15 44 PA 10 201.0020450 10/14 G 1/4“ 15 44 PP 10 220.0020451 10/14 G 1/4“ 15 44 PVDF 5 155.0020452 10/14 G 3/8“ 15 44 PA 10 210.0020453 10/14 G 3/8“ 15 44 PP 10 220.0020454 10/14 G 3/8“ 15 44 PVDF 5 231.0020455 10/14 G 1/2“ 16 45 PA 10 210.0020456 10/14 G 1/2“ 16 45 PP 10 247.0020457 10/14 G 1/2“ 16 45 PVDF 5 249.00
THOMAFLUID®-Elbow Connector made of PA/PP/PVDF
Product specification• L-shape, tubing connection on both sides
Cat.-No. NW D L1 Material Unit Price mm mm mm piece EURO
20545 4/6 15 25 PA 10 41.0020546 4/6 15 25 PP 10 52.0020547 4/6 15 25 PVDF 5 115.0020548 6/8 15 29 PA 10 59.0020549 6/8 15 29 PP 10 69.0020550 6/8 15 29 PVDF 5 126.0020551 6/10 20 35 PA 10 80.00
Cat.-No. NW D L1 Material Unit Price mm mm mm piece EURO
20552 6/10 20 35 PP 10 86.0020553 6/10 20 35 PVDF 5 135.0020554 8/10 20 35 PA 10 85.0020555 8/10 20 35 PP 10 88.0020556 8/10 20 35 PVDF 5 141.0020557 8/12 20 37 PA 10 110.0020558 8/12 20 37 PP 10 152.0020559 8/12 20 37 PVDF 5 165.0020560 10/14 25 42 PA 5 105.0020561 10/14 25 42 PP 5 120.0020562 10/14 25 42 PVDF 5 164.00
THOMAFLUID®-Elbow Connector made of PA/PP/PVDF – Bulkhead
Product specification• L-shape, tubing connection on both sides, control panel mounting
Cat.-No. NW L1 L2 WAF Material Unit Price mm mm mm mm piece EURO
20563 4/6 25 36 14 PA 10 46.0020564 4/6 25 36 14 PP 10 64.0020565 4/6 25 36 14 PVDF 5 153.0020566 6/8 27 39 17 PA 10 72.0020567 6/8 27 39 17 PP 10 100.0020568 6/8 27 39 17 PVDF 5 192.0020569 6/10 32 46 22 PA 10 100.0020570 6/10 32 46 22 PP 10 110.0020571 6/10 32 46 22 PVDF 5 189.0020572 8/10 34 47 22 PA 10 100.0020573 8/10 34 47 22 PP 10 124.0020574 8/10 34 47 22 PVDF 5 200.0020575 8/12 34 51 24 PA 10 93.0020576 8/12 34 51 24 PP 10 132.0020577 8/12 34 51 24 PVDF 5 131.0020578 10/14 39 56 27 PA 5 105.0020579 10/14 39 56 27 PP 5 147.0020580 10/14 39 56 27 PVDF 3 138.00
THOMAFLUID®-Elbow Connector with Male Thread made of PA/PP/PVDF – short
Product specification• L-shape, tubing connection on one side; male G- or NPT-thread on the
other side; short model
-
26 THOMAFLUID® III - 2014
Fittings - Screw Joints for Tubings (I-Ø: 1.6 - 12 mm) One-Piece Connectors - Plastics
Cat.-No. NW External thread
L1 L2 Material Unit Price
mm inch mm mm piece EURO
20581 4/6 G 1/8“ 25 12 PA 10 39.0020582 4/6 G 1/8“ 25 12 PP 10 52.0020583 4/6 G 1/8“ 25 12 PVDF 5 96.0020584 4/6 G 1/4“ 25 12 PA 10 50.0020585 4/6 G 1/4“ 25 12 PP 10 65.0020586 4/6 G 1/4“ 25 12 PVDF 5 99.0020587 4/6 G 3/8“ 28 12 PA 10 75.0020588 4/6 G 3/8“ 28 12 PP 10 73.0020589 4/6 G 3/8“ 28 12 PVDF 5 114.0020590 4/6 G 1/2“ 31 15 PA 10 100.0020591 4/6 G 1/2“ 31 15 PP 10 113.0020592 4/6 G 1/2“ 31 15 PVDF 5 141.0020593 6/8 G 1/8“ 27 12 PA 10 100.0020594 6/8 G 1/8“ 27 12 PP 10 113.0020595 6/8 G 1/8“ 27 12 PVDF 5 141.0020596 6/8 G 1/4“ 27 12 PA 10 100.0020597 6/8 G 1/4“ 27 12 PP 10 113.0020598 6/8 G 1/4“ 27 12 PVDF 5 141.0020599 6/8 G 3/8“ 30 12 PA 10 120.0020600 6/8 G 3/8“ 30 12 PP 10 120.0020601 6/8 G 3/8“ 30 12 PVDF 5 144.0020602 6/8 G 1/2“ 33 15 PA 10 130.0020603 6/8 G 1/2“ 33 15 PP 10 126.0020604 6/8 G 1/2“ 33 15 PVDF 5 160.0020605 6/10 G 1/8“ 32 15 PA 10 130.0020606 6/10 G 1/8“ 32 15 PP 10 127.0020607 6/10 G 1/8“ 32 15 PVDF 5 160.0020608 6/10 G 1/4“ 32 15 PA 10 130.0020609 6/10 G 1/4“ 32 15 PP 10 127.0020610 6/10 G 1/4“ 32 15 PVDF 5 159.0020611 6/10 G 3/8“ 32 15 PA 10 130.0020612 6/10 G 3/8“ 32 15 PP 10 130.0020613 6/10 G 3/8“ 32 15 PVDF 5 160.0020614 6/10 G 1/2“ 35 15 PA 10 130.0020615 6/10 G 1/2“ 35 15 PP 10 140.0020616 6/10 G 1/2“ 35 15 PVDF 5 173.0020617 8/10 G 1/8“ 34 15 PA 10 130.0020618 8/10 G 1/8“ 34 15 PP 10 133.0020619 8/10 G 1/8“ 34 15 PVDF 5 175.0020620 8/10 G 1/4“ 34 15 PA 10 130.0020621 8/10 G 1/4“ 34 15 PP 10 133.0020622 8/10 G 1/4“ 34 15 PVDF 5 173.0020623 8/10 G 3/8“ 34 15 PA 10 129.0020624 8/10 G 3/8“ 34 15 PP 10 134.0020625 8/10 G 3/8“ 34 15 PVDF 5 123.00
Cat.-No. NW External thread
L1 L2 Material Unit Price
mm inch mm mm piece EURO
20626 8/10 G 1/2“ 37 15 PA 10 131.0020627 8/10 G 1/2“ 37 15 PP 10 134.0020628 8/10 G 1/2“ 37 15 PVDF 5 160.0020629 8/12 G 1/8“ 34 17 PA 5 120.0020630 8/12 G 1/8“ 34 17 PP 5 125.0020631 8/12 G 1/8“ 34 17 PVDF 5 180.0020632 8/12 G 1/4“ 34 17 PA 5 120.0020633 8/12 G 1/4“ 34 17 PP 5 125.0020634 8/12 G 1/4“ 34 17 PVDF 5 176.0020635 8/12 G 3/8“ 34 17 PA 5 125.0020636 8/12 G 3/8“ 34 17 PP 5 130.0020637 8/12 G 3/8“ 34 17 PVDF 5 190.0020638 8/12 G 1/2“ 37 17 PA 5 140.0020639 8/12 G 1/2“ 37 17 PP 5 152.0020640 8/12 G 1/2“ 37 17 PVDF 5 190.0020641 10/14 G 1/8“ 39 18 PA 5 140.0020642 10/14 G 1/8“ 39 18 PP 5 155.0020643 10/14 G 1/8“ 39 18 PVDF 5 135.0020644 10/14 G 1/4“ 39 18 PA 5 140.0020645 10/14 G 1/4“ 39 18 PP 5 155.0020646 10/14 G 1/4“ 39 18 PVDF 5 180.0020647 10/14 G 3/8“ 39 18 PA 5 140.0020648 10/14 G 3/8“ 39 18 PP 5 155.0020649 10/14 G 3/8“ 39 18 PVDF 5 180.0020650 10/14 G 1/2“ 39 18 PA 5 160.0020651 10/14 G 1/2“ 39 18 PP 5 165.0020652 10/14 G 1/2“ 39 18 PVDF 5 200.0020653 4/6 NPT 1/8“ 18 17 PA 10 39.0020654 4/6 NPT 1/8“ 18 17 PP 10 52.0020655 4/6 NPT 1/8“ 18 17 PVDF 5 96.0020656 4/6 NPT 1/4“ 23 12 PA 10 49.0020657 4/6 NPT 1/4“ 23 12 PP 10 65.0020658 4/6 NPT 1/4“ 23 12 PVDF 5 99.0020659 4/6 NPT 3/8“ 28 12 PA 10 75.0020660 4/6 NPT 3/8“ 28 12 PP 10 73.0020661 4/6 NPT 3/8“ 28 12 PVDF 5 109.0020662 4/6 NPT 1/2“ 31 15 PA 10 100.0020663 4/6 NPT 1/2“ 31 15 PP 10 120.0020664 4/6 NPT 1/2“ 31 15 PVDF 5 141.0020665 6/8 NPT 1/8“ 27 12 PA 10 100.0020666 6/8 NPT 1/8“ 27 12 PP 10 120.0020667 6/8 NPT 1/8“ 27 12 PVDF 5 141.0020668 6/8 NPT 1/4“ 27 12 PA 10 100.0020669 6/8 NPT 1/4“ 27 12 PP 10 113.0020670 6/8 NPT 1/4“ 27 12 PVDF 5 141.0020671 6/8 NPT 3/8“ 30 12 PA 10 120.0020672 6/8 NPT 3/8“ 30 12 PP 10 120.0020673 6/8 NPT 3/8“ 30 12 PVDF 5 145.0020674 6/8 NPT 1/2“ 33 15 PA 10 130.0020675 6/8 NPT 1/2“ 33 15 PP 10 126.0020676 6/8 NPT 1/2“ 33 15 PVDF 5 160.0020677 6/10 NPT 1/8“ 32 15 PA 10 130.0020678 6/10 NPT 1/8“ 32 15 PP 10 130.0020679 6/10 NPT 1/8“ 32 15 PVDF 5 160.0020680 6/10 NPT 1/4“ 32 15 PA 10 130.00
-
THOMAFLUID® III - 2014 27
Fittings - Screw Joints for Tubings (I-Ø: 1.6 - 12 mm) One-Piece Connectors - Plastics
Cat.-No. NW External thread
L1 L2 Material Unit Price
mm inch mm mm piece EURO
20681 6/10 NPT 1/4“ 32 15 PP 10 127.0020682 6/10 NPT 1/4“ 32 15 PVDF 5 159.0020683 6/10 NPT 3/8“ 32 15 PA 10 130.0020684 6/10 NPT 3/8“ 32 15 PP 10 130.0020685 6/10 NPT 3/8“ 32 15 PVDF 5 159.0020686 6/10 NPT 1/2“ 35 15 PA 10 130.0020687 6/10 NPT 1/2“ 35 15 PP 10 140.0020688 6/10 NPT 1/2“ 35 15 PVDF 5 175.0020689 8/10 NPT 1/8“ 34 15 PA 10 130.0020690 8/10 NPT 1/8“ 34 15 PP 10 140.0020691 8/10 NPT 1/8“ 34 15 PVDF 5 175.0020692 8/10 NPT 1/4“ 34 15 PA 10 130.0020693 8/10 NPT 1/4“ 34 15 PP 10 133.0020694 8/10 NPT 1/4“ 34 15 PVDF 5 173.0020695 8/10 NPT 3/8“ 34 15 PA 10 130.0020696 8/10 NPT 3/8“ 34 15 PP 10 134.0020697 8/10 NPT 3/8“ 34 15 PVDF 5 123.0020698 8/10 NPT 1/2“ 37 15 PA 10 140.0020699 8/10 NPT 1/2“ 37 15 PP 10 134.0020700 8/10 NPT 1/2“ 37 15 PVDF 5 129.0020701 8/12 NPT 1/8“ 34 17 PA 5 130.0020702 8/12 NPT 1/8“ 34 17 PP 5 130.0020703 8/12 NPT 1/8“ 34 17 PVDF 5 173.0020704 8/12 NPT 1/4“ 34 17 PA 5 130.0020705 8/12 NPT 1/4“ 34 17 PP 5 129.0020706 8/12 NPT 1/4“ 34 17 PVDF 5 173.0020707 8/12 NPT 3/8“ 34 17 PA 5 128.0020708 8/12 NPT 3/8“ 34 17 PP 5 130.0020709 8/12 NPT 3/8“ 34 17 PVDF 5 180.0020710 8/12 NPT 1/2“ 37 17 PA 5 140.0020711 8/12 NPT 1/2“ 37 17 PP 5 155.0020712 8/12 NPT 1/2“ 37 17 PVDF 5 180.0020713 10/14 NPT 1/8“ 39 18 PA 5 140.0020714 10/14 NPT 1/8“ 39 18 PP 5 155.0020715 10/14 NPT 1/8“ 39 18 PVDF 5 180.0020716 10/14 NPT 1/2“ 39 18 PA 5 160.0020717 10/14 NPT 1/2“ 39 18 PP 5 165.0020718 10/14 NPT 1/2“ 39 18 PVDF 5 200.00
THOMAFLUID®-Elbow Connector with Male Thread made of PA/PP/PVDF – long
Product specification• L-shape, tubing connection on one side; male G- or NPT-thread on the
other side; long model
Cat.-No. NW External thread
l1 L1 Material Unit Price
mm inch mm mm piece EURO
20791 4/6 G 1/8“ 8 25 PA 10 46.0020792 4/6 G 1/8“ 8 25 PP 10 60.0020793 4/6 G 1/8“ 8 25 PVDF 5 165.0020794 4/6 G 1/4“ 12 25 PA 10 60.0020795 4/6 G 1/4“ 12 25 PP 10 70.0020796 4/6 G 1/4“ 12 25 PVDF 5 165.0020797 4/6 G 3/8“ 12 28 PA 10 100.0020798 4/6 G 3/8“ 12 28 PP 10 110.0020799 4/6 G 3/8“ 12 28 PVDF 5 165.0020800 4/6 G 1/2“ 14 31 PA 10 130.0020801 4/6 G 1/2“ 14 31 PP 10 136.0020802 4/6 G 1/2“ 14 31 PVDF 3 123.0020803 6/8 G 1/8“ 8 27 PA 10 123.0020804 6/8 G 1/8“ 8 27 PP 10 140.0020805 6/8 G 1/8“ 8 27 PVDF 5 165.0020806 6/8 G 1/4“ 12 27 PA 10 130.0020807 6/8 G 1/4“ 12 27 PP 10 140.0020808 6/8 G 1/4“ 12 27 PVDF 5 164.0020809 6/8 G 3/8“ 12 30 PA 10 130.0020810 6/8 G 3/8“ 12 30 PP 10 150.0020811 6/8 G 3/8“ 12 30 PVDF 5 180.0020812 6/8 G 1/2“ 14 33 PA 10 130.0020813 6/8 G 1/2“ 14 33 PP 10 150.0020814 6/8 G 1/2“ 14 33 PVDF 3 129.0020815 6/10 G 1/8“ 8 32 PA 1 on req.20816 6/10 G 1/8“ 8 32 PP 1 on req.20817 6/10 G 1/8“ 8 32 PVDF 1 on req.20818 6/10 G 1/4“ 12 32 PA 1 on req.20819 6/10 G 1/4“ 12 32 PP 1 on req.20820 6/10 G 1/4“ 12 32 PVDF 1 on req.20821 6/10 G 3/8“ 12 32 PA 1 on req.20822 6/10 G 3/8“ 12 32 PP 1 on req.20823 6/10 G 3/8“ 12 32 PVDF 1 on req.20824 6/10 G 1/2“ 14 35 PA 1 on req.20825 6/10 G 1/2“ 14 35 PP 1 on req.20826 6/10 G 1/2“ 14 35 PVDF 1 on req.20827 4/6 NPT 1/4“ 15 23 PA 10 62.0020828 4/6 NPT 1/4“ 15 23 PP 10 72.0020829 4/6 NPT 1/4“ 15 23 PVDF 5 185.0020830 4/6 NPT 3/8“ 15 28 PA 10 90.0020831 4/6 NPT 3/8“ 15 28 PP 10 93.0020832 4/6 NPT 3/8“ 15 28 PVDF 5 190.0020833 4/6 NPT 1/2“ 20 31 PA 10 110.0020834 4/6 NPT 1/2“ 20 31 PP 10 120.0020835 4/6 NPT 1/2“ 20 31 PVDF 3 153.0020836 6/8 NPT 1/8“ 10 27 PA 10 110.0020837 6/8 NPT 1/8“ 10 27 PP 10 120.0020838 6/8 NPT 1/8“ 10 27 PVDF 5 155.0020839 6/8 NPT 1/4“ 15 27 PA 10 110.0020840 6/8 NPT 1/4“ 15 27 PP 10 120.0020841 6/8 NPT 1/4“ 15 27 PVDF 5 152.0020842 6/8 NPT 3/8“ 15 30 PA 10 130.0020843 6/8 NPT 3/8“ 15 30 PP 10 130.0020844 6/8 NPT 3/8“ 15 30 PVDF 5 170.0020845 6/8 NPT 1/2“ 20 33 PA 10 130.00
-
28 THOMAFLUID® III - 2014
Fittings - Screw Joints for Tubings (I-Ø: 1.6 - 12 mm) One-Piece Connectors - Plastics
Cat.-No. NW External thread
l1 L1 Material Unit Price
mm inch mm mm piece EURO
20846 6/8 NPT 1/2“ 20 33 PP 10 130.0020847 6/8 NPT 1/2“ 20 33 PVDF 3 141.0020848 6/10 NPT 1/8“ 10 32 PA 1 on req.20849 6/10 NPT 1/8“ 10 32 PP 1 on req.20850 6/10 NPT 1/8“ 10 32 PVDF 1 on req.20851 6/10 NPT 1/4“ 15 32 PA 1 on req.20852 6/10 NPT 1/4“ 15 32 PP 1 on req.20853 6/10 NPT 1/4“ 15 32 PVDF 1 on req.20854 6/10 NPT 3/8“ 15 32 PA 1 on req.20855 6/10 NPT 3/8“ 15 32 PP 1 on req.20856 6/10 NPT 3/8“ 15 32 PVDF 1 on req.20857 6/10 NPT 1/2“ 20 35 PA 1 on req.20858 6/10 NPT 1/2“ 20 35 PP 1 on req.20859 6/10 NPT 1/2“ 20 35 PVDF 1 on req.
THOMAFLUID®-Elbow Connector with Female Thread made of PA/PP/PVDF
Product specification• Straight, tubing connection on one side, female G-thread on the other
side
Cat.-No. NW Internal thread
l1 L1 Material Unit Price
mm inch mm mm piece EURO
20860 4/6 G 1/8“ 12 25 PA 10 49.0020861 4/6 G 1/8“ 12 25 PP 10 62.0020862 4/6 G 1/8“ 12 25 PVDF 5 87.0020863 4/6 G 1/4“ 15 28 PA 10 62.0020864 4/6 G 1/4“ 15 28 PP 10 75.0020865 4/6 G 1/4“ 15 28 PVDF 5 90.0020866 4/6 G 3/8“ 15 31 PA 10 110.0020867 4/6 G 3/8“ 15 31 PP 10 130.0020868 4/6 G 3/8“ 15 31 PVDF 5 90.0020869 4/6 G 1/2“ 16 33 PA 10 110.0020870 4/6 G 1/2“ 16 33 PP 10 121.0020871 4/6 G 1/2“ 16 33 PVDF 5 105.0020872 6/8 G 1/8“ 12 27 PA 10 110.0020873 6/8 G 1/8“ 12 27 PP 10 121.0020874 6/8 G 1/8“ 12 27 PVDF 5 105.0020875 6/8 G 1/4“ 15 30 PA 10 109.0020876 6/8 G 1/4“ 15 30 PP 10 121.0020877 6/8 G 1/4“ 15 30 PVDF 5 105.0020878 6/8 G 3/8“ 15 33 PA 10 110.0020879 6/8 G 3/8“ 15 33 PP 10 130.00
Cat.-No. NW Internal thread
l1 L1 Material Unit Price
mm inch mm mm piece EURO
20880 6/8 G 3/8“ 15 33 PVDF 5 105.0020881 6/8 G 1/2“ 16 35 PA 10 110.0020882 6/8 G 1/2“ 16 35 PP 10 121.0020883 6/8 G 1/2“ 16 35 PVDF 5 105.0020884 6/10 G 1/8“ 12 32 PA 10 110.0020885 6/10 G 1/8“ 12 32 PP 10 130.0020886 6/10 G 1/8“ 12 32 PVDF 5 136.0020887 6/10 G 1/4“ 15 32 PA 10 120.0020888 6/10 G 1/4“ 15 32 PP 10 130.0020889 6/10 G 1/4“ 15 32 PVDF 5 140.0020890 6/10 G 3/8“ 15 32 PA 10 117.0020891 6/10 G 3/8“ 15 32 PP 10 129.0020892 6/10 G 3/8“ 15 32 PVDF 5 150.0020893 6/10 G 1/2“ 16 37 PA 10 120.0020894 6/10 G 1/2“ 16 37 PP 10 130.0020895 6/10 G 1/2“ 16 37 PVDF 5 150.00
THOMAFLUID®-T-Shaped Connector made of PA/PP/PVDF
Product specification• T-shape, tubing connections at three sides
Cat.-No. NW L1 L2 Material Unit Price mm mm mm piece EURO
21028 4/6 50 25 PA 10 52.0021029 4/6 50 25 PP 10 83.0021030 4/6 50 25 PVDF 5 152.0021031 6/8 54 27 PA 10 87.0021032 6/8 54 27 PP 10 123.0021033 6/8 54 27 PVDF 5 192.0021034 6/10 65 32 PA 10 104.0021035 6/10 65 32 PP 10 135.0021036 6/10 65 32 PVDF 3 135.0021037 8/10 68 34 PA 10 104.0021038 8/10 68 34 PP 10 135.0021039 8/10 68 34 PVDF 3 135.0021040 8/12 68 34 PA 5 152.0021041 8/12 68 34 PP 5 169.0021042 8/12 68 34 PVDF 2 108.0021043 10/14 79 39 PA 5 185.0021044 10/14 79 39 PP 5 203.0021045 10/14 79 39 PVDF 2 124.00
-
THOMAFLUID® III - 2014 29
Fittings - Screw Joints for Tubings (I-Ø: 1.6 - 12 mm) One-Piece Connectors - Plastics
THOMAFLUID®-T-Shaped Connector with Male Thread made of PA/PP/PVDF – symmetrical
Product specification• T-shape, tubing connections on two sides; male G- or NPT-thread on
the third side
Cat.-No. NW External thread
L1 Material Unit Price
mm inch mm piece EURO
21046 4/6 G 1/8“ 50 PA 10 90.0021047 4/6 G 1/8“ 50 PP 10 96.0021048 4/6 G 1/8“ 50 PVDF 3 132.0021049 4/6 G 1/4“ 50 PA 10 85.0021050 4/6 G 1/4“ 50 PP 10 96.0021051 4/6 G 1/4“ 50 PVDF 3 132.0021052 4/6 G 3/8“ 56 PA 10 90.0021053 4/6 G 3/8“ 56 PP 10 96.0021054 4/6 G 3/8“ 56 PVDF 3 144.0021055 4/6 G 1/2“ 62 PA 10 110.0021056 4/6 G 1/2“ 62 PP 10 125.0021057 4/6 G 1/2“ 62 PVDF 3 162.0021058 6/8 G 1/8“ 54 PA 10 110.0021059 6/8 G 1/8“ 54 PP 10 125.0021060 6/8 G 1/8“ 54 PVDF 3 162.0021061 6/8 G 1/4“ 54 PA 10 110.0021062 6/8 G 1/4“ 54 PP 10 125.0021063 6/8 G 1/4“ 54 PVDF 3 162.0021064 6/8 G 3/8“ 60 PA 10 110.0021065 6/8 G 3/8“ 60 PP 10 125.0021066 6/8 G 3/8“ 60 PVDF 3 162.0021067 6/8 G 1/2“ 66 PA 10 110.0021068 6/8 G 1/2“ 66 PP 10 125.0021069 6/8 G 1/2“ 66 PVDF 3 162.0021070 6/10 G 1/8“ 65 PA 10 130.0021071 6/10 G 1/8“ 65 PP 10 130.0021072 6/10 G 1/8“ 65 PVDF 3 162.0021073 6/10 G 1/4“ 65 PA 10 130.0021074 6/10 G 1/4“ 65 PP 10 130.0021075 6/10 G 1/4“ 65 PVDF 3 162.0021076 6/10 G 3/8“ 65 PA 10 130.0021077 6/10 G 3/8“ 65 PP 10 150.0021078 6/10 G 3/8“ 65 PVDF 3 174.0021079 6/10 G 1/2“ 71 PA 10 160.0021080 6/10 G 1/2“ 71 PP 10 180.0021081 6/10 G 1/2“ 71 PVDF 1 61.0021082 8/10 G 1/8“ 68 PA 10 160.0021083 8/10 G 1/8“ 68 PP 10 180.00
Cat.-No. NW External thread
L1 Material Unit Price
mm inch mm piece EURO
21084 8/10 G 1/8“ 68 PVDF 2 122.0021085 8/10 G 1/4“ 68 PA 10 160.0021086 8/10 G 1/4“ 68 PP 10 172.0021087 8/10 G 1/4“ 68 PVDF 2 122.0021088 8/10 G 3/8“ 68 PA 10 155.0021089 8/10 G 3/8“ 68 PP 10 172.0021090 8/10 G 3/8“ 68 PVDF 2 111.0021091 8/10 G 1/2“ 74 PA 10 160.0021092 8/10 G 1/2“ 74 PP 10 172.0021093 8/10 G 1/2“ 74 PVDF 1 60.0021094 8/12 G 1/8“ 68 PA 5 195.0021095 8/12 G 1/8“ 68 PP 5 205.0021096 8/12 G 1/8“ 68 PVDF 2 120.0021097 8/12 G 1/4“ 68 PA 5 195.0021098 8/12 G 1/4“ 68 PP 5 205.0021099 8/12 G 1/4“ 68 PVDF 2 119.0021100 8/12 G 3/8“ 68 PA 5 210.0021101 8/12 G 3/8“ 68 PP 5 215.0021102 8/12 G 3/8“ 68 PVDF 1 61.0021103 8/12 G 1/2“ 74 PA 5 210.0021104 8/12 G 1/2“ 74 PP 3 138.0021105 8/12 G 1/2“ 74 PVDF 1 65.0021106 10/14 G 1/8“ 79 PA 3 135.0021107 10/14 G 1/8“ 79 PP 3 138.0021108 10/14 G 1/8“ 79 PVDF 1 65.0021109 10/14 G 1/4“ 79 PA 3 150.0021110 10/14 G 1/4“ 79 PP 3 162.0021111 10/14 G 1/4“ 79 PVDF 1 68.0021112 10/14 G 3/8“ 79 PA 3 156.0021113 10/14 G 3/8“ 79 PP 3 165.0021114 10/14 G 3/8“ 79 PVDF 1 73.0021115 10/14 G 1/2“ 79 PA 3 165.0021116 10/14 G 1/2“ 79 PP 3 168.0021117 10/14 G 1/2“ 79 PVDF 1 76.0021118 4/6 NPT 1/8“ 50 PA 10 85.0021119 4/6 NPT 1/8“ 50 PP 10 100.0021120 4/6 NPT 1/8“ 50 PVDF 3 132.0021121 4/6 NPT 1/4“ 50 PA 10 90.0021122 4/6 NPT 1/4“ 50 PP 10 135.0021123 4/6 NPT 1/4“ 50 PVDF 3 138.0021124 4/6 NPT 3/8“ 56 PA 10 110.0021125 4/6 NPT 3/8“ 56 PP 10 115.0021126 4/6 NPT 3/8“ 56 PVDF 3 147.0021127 4/6 NPT 1/2“ 62 PA 10 110.0021128 4/6 NPT 1/2“ 62 PP 10 130.0021129 4/6 NPT 1/2“ 62 PVDF 3 159.0021130 6/8 NPT 1/8“ 54 PA 10 110.0021131 6/8 NPT 1/8“ 54 PP 10 130.0021132 6/8 NPT 1/8“ 54 PVDF 3 159.0021133 6/8 NPT 1/4“ 54 PA 10 110.0021134 6/8 NPT 1/4“ 54 PP 10 125.0021135 6/8 NPT 1/4“ 54 PVDF 3 159.0021136 6/8 NPT 3/8“ 60 PA 10 110.0021137 6/8 NPT 3/8“ 60 PP 10 150.0021138 6/8 NPT 3/8“ 60 PVDF 2 102.00
-
30 THOMAFLUID® III - 2014
Fittings - Screw Joints for Tubings (I-Ø: 1.6 - 12 mm) One-Piece Connectors - Plastics
Cat.-No. NW External thread
L1 Material Unit Price
mm inch mm piece EURO
21139 6/8 NPT 1/2“ 66 PA 10 120.0021140 6/8 NPT 1/2“ 66 PP 10 148.0021141 6/8 NPT 1/2“ 66 PVDF 2 110.0021142 6/10 NPT 1/8“ 65 PA 10 120.0021143 6/10 NPT 1/8“ 65 PP 10 150.0021144 6/10 NPT 1/8“ 65 PVDF 2 110.0021145 6/10 NPT 1/4“ 65 PA 10 120.0021146 6/10 NPT 1/4“ 65 PP 10 150.0021147 6/10 NPT 1/4“ 65 PVDF 2 110.0021148 6/10 NPT 3/8“ 65 PA 10 150.0021149 6/10 NPT 3/8“ 65 PP 10 170.0021150 6/10 NPT 3/8“ 65 PVDF 2 110.0021151 6/10 NPT 1/2“ 71 PA 10 160.0021152 6/10 NPT 1/2“ 71 PP 10 170.0021153 6/10 NPT 1/2“ 71 PVDF 2 120.0021154 8/10 NPT 1/8“ 68 PA 10 160.0021155 8/10 NPT 1/8“ 68 PP 10 170.0021156 8/10 NPT 1/8“ 68 PVDF 2 120.0021157 8/10 NPT 1/4“ 68 PA 10 160.0021158 8/10 NPT 1/4“ 68 PP 10 170.0021159 8/10 NPT 1/4“ 68 PVDF 2 119.0021160 8/10 NPT 3/8“ 68 PA 10 160.0021161 8/10 NPT 3/8“ 68 PP 10 170.0021162 8/10 NPT 3/8“ 68 PVDF 2 120.0021163 8/10 NPT 1/2“ 74 PA 10 170.0021164 8/10 NPT 1/2“ 74 PP 10 190.0021165 8/10 NPT 1/2“ 74 PVDF 2 124.0021166 8/12 NPT 1/8“ 68 PA 5 175.0021167 8/12 NPT 1/8“ 68 PP 3 126.0021168 8/12 NPT 1/8“ 68 PVDF 2 124.0021169 8/12 NPT 1/4“ 68 PA 5 175.0021170 8/12 NPT 1/4“ 68 PP 3 126.0021171 8/12 NPT 1/4“ 68 PVDF 2 124.0021172 8/12 NPT 3/8“ 68 PA 5 175.0021173 8/12 NPT 3/8“ 68 PP 3 126.0021174 8/12 NPT 3/8“ 68 PVDF 2 124.0021175 8/12 NPT 1/2“ 74 PA 5 175.0021176 8/12 NPT 1/2“ 74 PP 3 126.0021177 8/12 NPT 1/2“ 74 PVDF 2 124.0021178 10/14 NPT 1/8“ 79 PA 3 147.0021179 10/14 NPT 1/8“ 79 PP 3 159.0021180 10/14 NPT 1/8“ 79 PVDF 2 124.0021181 10/14 NPT 1/4“ 79 PA 3 147.0021182 10/14 NPT 1/4“ 79 PP 3 159.0021183 10/14 NPT 1/4“ 79 PVDF 2 124.0021184 10/14 NPT 3/8“ 79 PA 3 147.0021185 10/14 NPT 3/8“ 79 PP 3 159.0021186 10/14 NPT 3/8“ 79 PVDF 2 124.0021187 10/14 NPT 1/2“ 79 PA 3 159.0021188 10/14 NPT 1/2“ 79 PP 3 165.0021189 10/14 NPT 1/2“ 79 PVDF 1 95.00
THOMAFLUID®-T-Shaped Connector with Male Thread made of PA/PP/PVDF – asymmetrica