Thread Standards and Definitions United States, Canada, and United Kingdom use the Unified of Unified Inch profile, in accordance with the Unified and American Screw Threads – ASA B1.1-1989. UNC – Unified National Coarse UNF – Unified National Fine UNEF – Unified National Extra Fine UNS – Unified National Special UNR – Unified National Round (round root) ISO – International Standards Organization (metric) Two major Unified thread series are in use: UN and UNR. For the UN series, you specify C (coarse), F (fine), or EF (extra fine), as required. For the UNR series, the root radius must also be specified. The UNR series screws are better for fatigue because the root radius reduces stress concentrations. The basic thread geometry for ISO and Unified threads is shown below.

p/4

p/8 pp

o60o30

crest

Root (minor)diameter ( d )r

Axis of Thread

Major diameter(d or d )c

Mean (pitch)diameter ( d or d )pm

Unified and ISO Thread Geometry

Pitch (p) – The distance between adjacent thread forms measured parallel to the thread axis. Lead (L) – The distance the nut moves parallel to the screw axis when the nut is given one turn. TPI (n) – The number of Threads Per Inch, related to the pitch by 1/p n= . Root (minor) Diameter – Smallest diameter of screw - rd . Major Diameter – Largest diameter of screw - cd (sometimes designated as d). Mean (pitch) Diameter – Average diameter of screw - md (sometimes designated as pd ). Lead Angle ( λ ) – The angle defining the inclination of the thread (see figure below). Helix Angle (ψ ) – The angle between the thread axis and the lead angle ( o90ψ λ+ = ).

Lead, Helix, and Pitch for single thread Lead and Pitch for double thread L p= 2L p=

p ψλ

p

L Thread Classifications: There are three classes of thread fit; Loose (where the joint is frequently disassembled) – Class 1 Standard (general assembly) – Class 2 Close (high accuracy, fine fits) – Class 3 Designations for each class and the type of thread (inside or outside) for Unified and Metric are given below.

Unified Metric Class External Thread Internal Thread External Thread Internal Thread Loose 1A 1B 8g 7h

Standard 2A 2B 6g 6h Close 3A 3B 4g 5h

Nomenclature: Examples of the nomenclature for specifying a threaded fastener are given below for Unified National and Metric specifications Unified National: Metric:

12

- 12 UNC - 3A LH

Major Diameter(< 1/4" are numbered, #12 = 0.2160", #0 = 0.060")

Threads per inch

Classification: UNC - unified national coarse UNF - unified national fine UNEF - unified national extra fine

Tolerance specification (class of fit)Type of thread (A- External, B - Internal)

Hand of thread (L = left, R = right)

M 12 x 1.75 , 6g x 85

Metric

Nominal size (diameter)

Length (mm)

Pitch (mm)Fit classification