tip pump

www.tip-pumpen.de

› Submersible pumps

› Garden pumps

› Submersible pressure pumps

› Deep-well pumps

› Booster sets

› Petrol-engine pumps

› Special pumps

The Pump Pros

T.I.P.Pumpen

®

T.I.P. TECHNIK + KOMPETENZ

2

www.tip-pumpen.de

Dear customer,

we are pleased to present you our new catalogue on pump and irrigation technology. This new edition, too, contains all you have to know including useful tips around the topics of drainage and irrigation as well as domestic water supply. Our comprehensive pro-duct range and our more than 30 years of experience in the development of high-quality pumps will permit you to find the product tailored to your specific needs. In our specialised separate catalogue you will find a large selection of products around your pond.

More than 30 years of development of top-level pumpsOur company, specialised in the manufacture and distribution of water pumps and pond filters, was founded in 1978. When selec-ting the product range, quality had absolute priority from the onset. The excellent price/performance ratio of our products quickly yielded positive results. In Germany, for instance, T.I.P. has been counting for years among the leading suppliers of pumps for pri-vate use in the house, yard and garden. Meanwhile, we are also very successful in distributing our products on a Europe-wide basis and in some non-European countries.

Continuous further development guarantees high qualityThe success and high quality of our range of products are owing to the incessant further development of our products in line with the latest state in technological expertise. This is escorted by a consistent implementation of top-quality requirements in the selec-tion of the materials and in the planning of production flows. This approach has resulted in convincing, powerful high-quality pumps with a low energy consumption. Moreover, our focus in the development of products is on a rigorously responsible use of water as a resource which becomes more and more scarce and valuable. Saving water and the sensible use of grey, brown and rainwater instead of drinking water will not only decrease your household costs, it also means an active contribution to environmental protec-tion.The “safety” topic, too, plays a major role in the development of our products. This means, for instance, that all our pumps bear the “GS” mark (“Geprüfte Sicherheit” = “Tested for safety”).

T.I.P. with a customer-friendly service offer on the internetAt www.tip-pumpen.de you will find a comprehensive and neatly organised internet presence where the main focus is on the benefit for our customers. Detailed information about products and accessories will permit you to take a deep insight in our product range. Moreover, informational product sheets are ready for being printed out. Any required spare parts can be selected and ordered quickly in our online shop. Within a regular updating process, we introduce new products, describe innovative technologies and publish valuable tips so that dropping by at our internet presence is always worthwhile.

Service hotline to clarify technical questionsAs a special service, we offer you a hotline regarding technical questions. Our specialised staff are ready to advise you in questions regarding installation, maintenance or similar matters. You can reach our technicians Monday through Friday from 15.00 to 17.00 o‘clock on 0049-(0)7263-912582 and 0049-(0)7263-912583. Please note: This service hotline is not in charge of matters regar-ding spare parts and repair, these are under the responsibility of a separate department.

Spare parts with 10 years’ availability guaranteedOur products come up to high standards in terms of quality and reliability. Nevertheless, they are subject to natural wear and tear which entails the necessity for spare parts. In this regard we may proudly mention our quite unusual offer which is highly apprecia-ted by our customers: We guarantee 10 years of availability for our spare parts. You won‘t have any problems finding spare parts for any products up to an age of 10 years, calculated from the day of the product’s purchase. If any repair work or spare parts should become necessary, please contact us by post, fax or e-mail.The corresponding addresses can be found on page 35.Our internet presence at www.tip-pumpen.de offers you the fastest and most convenient way of ordering spare parts. In the spare-parts shop you will find explosion drawings and part lists of our products so that it takes just a few clicks to locate and order any part you may need.

We wish you a lot of fun and inspiration when browsing through our catalogue.

Your T.I.P. Technische Industrie Produkte GmbH

The Pump Pros

3

www.tip-pumpen.de

Inhalt

DrainageSubmersible clean-water pumps

Submersible drainage pumps

Submersible dirty-water pumps

Contractor’s dirty-water pumps P. 4-9

IrrigationRain-water pumpSubmersible pressure pumpsDeep-well pumpsGarden pumpsAutomatic booster setsAutomation P. 10 - 19

Automatic water supply

Booster sets

Booster set with 50 L pressure vessel

Booster set for deep intake P. 20 - 27

Special pumpsPetrol-engine driven water pumps

Peripheral pump P. 28 - 30

Accessoriesfor submersible pumps

for surface pumps P. 31 - 34

We have the solutionfor you!

T.I.P.Pumpen

®

Contact

Contact P. 35

DrainageT.I.P. TECHNIK + KOMPETENZ

4

www.tip-pumpen.de

Submersible clean-water pumps

•Forclearandmoderatelycontaminatedwater•Drainage,fluidtransfer,evacuation•Specialdesignsfornarrowdrainageshafts•Unitswithshallow-suctioncapabilityfordrainage down to surfaces ready to be wiped off•Floatswitchforautomaticoperation•Maintenance-free motor with thermal overload protection•Pumphousingmadeofimpact-resistantplastic•Variableconnectionsizesowingtomulti-dimensional connection piece

Submersible clean-water pumps are suit-able for pumping down or transferring pure or moderately contaminated liquids. Typical ap-plications include the discharge of household waste water, rain or seepage water as well as the evacuation of basins. One of the very particular features of submersible clean-water pumps is their shallow-suction capability which leaves surfaces ready to be wiped off.A pressure as low as 0.5 bar will be sufficient for the operation of a garden shower.

The float switch fulfils two important functions: On the one side, it will cut the pump in or out as a function of the water level, thus enabling the pump to be operated automatically. On the other, it protects the pump from damage caused by overheating resulting from operati-on in the absence of water, since it will cause the pump to cut out as soon as a specific fluid level is fallen short of.

Submersible drainage pumps are especially designed for use in narrow drainage shafts -owing to their compact design, the vertical pump outlet and the suspension cable. Thistype of pump is equipped with an integrat-ed float switch which gives you the choice between automatic or manual operation.

Shallow-suction units enable drainage down to surfaces ready for being wiped off since evacuation is possible down to a particularly low water level of just a few millimetres. The technical details of the pumps always specify the minimum evacuation level. This value indi-cates the lowest water level possible down to which liquids can be pumped off.

Pump housing – depending on the design, made of plastic, high-grade steel or cast metal

Float switch - automatic cut-in/cut-out as a function of the water level

Motor - protected from overload by a thermoprotector

Mains cable - 10 metres

Pump impeller - low-wearing design with a long life cycle

Horizontal pump outlet - large dimen-sion to ensure unrestricted passage of liquid

Proven technologyON

OFF

AUTOON

AUTO OFF

Submersible pumps

• Very reliable starter unit in conventional design• Optimally suited for all typical tasks of submersible clear water pumps

• Powerful, highly efficient unit in conventional design• Optimally suited for all typical tasks of submersible clear- water pumps

5

T.I.P.TECHNIK + KOMPETENZ

www.tip-pumpen.de

• Special design with shallow- suction capability for narrow shafts, wells etc.• Vertical pump outlet

Max. flow rate

Max. delivery height / pressure

Nominal performance

Max. submersion depth

Pressure port

Min. evacuation level

Max. grain size

Item number

Flow rate depending on the discharge height

7.800 l/h

6 m / 0,6 bar

300 Watt

5 m

41,91 mm (1 1/4“ MT)

10 mm

5 mm

30250

7.800 l/h

6 m / 0,6 bar

300 Watt

7 m

41,91 mm (1 1/4“ MT)

20 mm

6 mm

30251

12.000 l/h

7 m / 0,7 bar

400 Watt

7 m

41,91 mm (1 1/4“ MT)

20 mm

6 mm

30252

Submersible clean-water pump Submersible clean-water pump Submersible clean-water pump

TKV8000 TKX8000 TKX 12000

The product range - conventional and special designs

1,0 m2,0 m3,0 m4,0 m5,0 m6,0 m

6.780 l/h5.700 l/h4.500 l/h3.660 l/h2.580 l/h

• Special design with shallow- suction capability for narrow shafts from Ø 20 cm• Vertical pump outlet• Integrated float switch•Comes with a lowering rope

8.500 l/h

7 m / 0,7 bar

300 Watt

5 m

41,91 mm (1 1/4“ MT)

3 mm

5 mm

30112

Submersible drainage pump

INTEGRA440FS

1,0 m2,0 m3,0 m4,0 m5,0 m6,0 m7,0 m

7.300 l/h6.200 l/h4.950 l/h3.900 l/h2.500 l/h

950 l/h

1,0 m2,0 m3,0 m4,0 m5,0 m6,0 m

7.100 l/h6.000 l/h4.500 l/h2.800 l/h1.500 l/h

1,0 m2,0 m3,0 m4,0 m5,0 m6,0 m7,0 m

11.000 l/h9.600 l/h7.600 l/h5.000 l/h3.300 l/h1.650 l/h

DrainageT.I.P. TECHNIK + KOMPETENZ

6

www.tip-pumpen.de


•Forclearandheavilycontaminatedwater•Drainage,fluidtransfer,evacuation,emergencydrainage•Special designs for continuous operation and hot liquids•Extraordinarilysolidandefficientcontractor’spumps•Floatswitchforautomaticoperation•Maintenance-free motor with thermal overload protection•Pump housing made of plastic, cast iron or high-grade steel•Malethreadforunrestrictedflowrate•Allunitsareequippedwithconnectionpieces

Submersible dirty-water pumps were deve-loped for draining or transferring heavily con-taminated liquids. These units will take in and convey leaves and other plant residues, coarse particles and fibrous matters without any pro-blems. Therefore, they are optimally suited for draining garden ponds, pools, construction-sites and dirty-water pits.

The great variety of applications of submersi-ble dirty-water pumps is reflected in a carefully balanced range of products. This means, for instance, that the TVX series includes conven-tional designs for all common applications. In addition thereto, the DTX series is suitable for continuous operation. The top-quality Maxima series was developed for areas of use requi-ring extraordinarily strong, durable material.

With regard to emergency drainage of flooded premises, submersible dirty-water pumps are indispensable for rapid pumping off to minimise water damage. In these cases, the water mostly contains coarse particles. The max. grain size re-ferred to in the technical data specifies the max. diameter of the contaminating elements which the liquid being discharged is allowed to contain.

With its particularly high-quality technology, the EXTREMA 300/10 is an absolute top-class pump. The housing which is completely made of high-grade steel, the water-cooled motor and the high-precision ball bearings allow a performance level complying with very high standards. As a particular feature, it is possible to pump somewhat hot liquids up to 50 °C - temporarily even up to 95 °C.

Submersible dirty-water pumps are used to carry water which contains contaminants of various sizes. However, floating particles, sludge, sand, leaves, other plant residues and similar particles may interfere with the pump‘s proper operation or even stop it.

The VORTEX free-flow wheel efficiently pre-vents clogging of the pump since it swirls and shreds the contaminants to make them pass freely through the hydraulic system. This tech-nology has proven in practice for years in the evacuation of ponds and construction pits, but also for emergency drainage when every-thing has to be done very fast, although larger particles may be contained in the water and the pumps have to work at a maximum degree of efficiency and reliability.

TheVORTEXfree-flowwheel

Submersible pumps

• Powerful, highly efficient unit in conventional design• Optimally suited for all typical tasks of submersible dirty- water pumps

•Particularly powerful, highly efficient unit in conventional design• For speedy drainage of water containing exceptionally coarse contamination

7


www.tip-pumpen.de

•Ideal, very reliable starter unit in conventional design• Optimally suited for all typical tasks of submersible dirty- water pumps

• Versatile support system for all submersible pumps, submersible pressure and deep-well pumps• Increased installation versatility owing to horizontal or upright positioning of the pump• Increased stability and functional safety of the pump by installing the support system to the edges of cisterns or wells• When used as a wall support, the device is ideally suited as a storage place for the pump - e.g. in periods of frost

Max. flow rate


Nominal performance


Pressure port


Max. grain size

Item number


7.800 l/h

5 m / 0,5 bar

320 Watt

7 m

41,91 mm (1 1/4“ MT)

30 mm

20 mm

30260

10.800 l/h

6 m / 0,6 bar

480 Watt

7 m

41,91 mm (1 1/4“MT)

30 mm

20 mm

30261

14.200 l/h

8 m / 0,8 bar

600 Watt

7 m

41,91 mm (1 1/4“ MT)

37 mm

35 mm

30270 30947

Submersible dirty-water pump Submersible dirty-water pump Submersible dirty-water pump Support system (multifunctional)

TVX8000 TVX12000 TVX15000 TPT 20

TheTVXseries-classicdesignsforeachclassofperformance

1,0 m2,0 m3,0 m4,0 m5,0 m

6.500 l/h5.000 l/h3.400 l/h1.600 l/h

1,0 m2,0 m3,0 m4,0 m5,0 m6,0 m

10.500 l/h8.300 l/h6.500 l/h4.300 l/h2.000 l/h

1,0 m2,0 m3,0 m4,0 m5,0 m6,0 m

7,0 m

8,0 m

13.200 l/h11.300 l/h10.000 l/h

8.200 l/h6.000 l/h4.200 l/h

1.800 l/h

App

licat

ion

exam

ple

Drainage

• Special units for uninterrupted operation - optimally suited for both the typical application areas of submersible dirty-water pumps and for the recirculation of pond water and the operation of water courses

• Low-wearing design and silent operation owing to ceramics-coated high-grade steel motor shaft

• The VORTEX free-flow wheel minimises the risk of clogging and increases functional reliability

• Thermal overload protection will cut out the pump in the presence of any risk of overheating

• Float switch providing both automated cut-in and cut-out and an efficient protection from operation in the absence of water


8

www.tip-pumpen.de

• Solid starter unit• Suited for continuous operation - for instance for the recirculation of water or the operation of water courses

• Solid starter unit, comes with a support system for horizontal installation and a protection grid to prevent fish from being taken in• Suited for continuous operation

• Powerful, highly efficient unit• Suited for continuous operation - for instance for the recirculation of water or the operation of water courses

Max. flow rate


Nominal performance


Pressure port


Max. grain size

Item number


7.500 l/h

6 m / 0,6 bar

320 Watt

7 m

41,91 mm (1 1/4“ MT)

25 mm

22 mm

30157

7.500 l/h

6 m / 0,6 bar

320 Watt

7 m

41,91 mm (1 1/4“ MT)

25 mm

22 mm

30258

9.000 l/h

6 m / 0,6 bar

480 Watt

7 m

41,91 mm (1 1/4“ MT)

25 mm

22 mm

30158

Submersible dirty-water pump Submersible dirty-water pump Submersible dirty-water pump

DTX7500 DTX7500T DTX 10000


• Extremely powerful unit• All high-grade steel design• Water-cooled motor• High-precision ball bearings• Suitable for use with hot liquids up to 50 °C, temporarily even up to 95 °C

18.000 l/h

10 m / 1,0 bar

1.100 Watt

5 m

47,80 mm (1 1/2“ MT)

45 mm

40 mm

30038

Submersible dirty-water pump

EXTREMA 300/10

1,0 m2,0 m3,0 m4,0 m5,0 m6,0 m7,0 m8,0 m9,0 m

10,0 m

16.500 l/h14.400 l/h12.800 l/h10.500 l/h

8.600 l/h6.600 l/h4.300 l/h3.000 l/h1.500 l/h

1,0 m2,0 m3,0 m4,0 m5,0 m6,0 m

7.200 l/h6.000 l/h5.000 l/h3.000 l/h2.000 l/h

1,0 m2,0 m3,0 m4,0 m5,0 m6,0 m

7.200 l/h6.000 l/h5.000 l/h3.000 l/h2.000 l/h

1,0 m2,0 m3,0 m4,0 m5,0 m6,0 m

8.100 l/h6.800 l/h5.400 l/h3.500 l/h2.200 l/h

The DTX series: Submersible dirty-water pumps for continuous operation

Submersible pumps

• Especially designed, particularly solid and strong submersible dirty-water pump for use under very extreme conditions

• Optimally suited for all typical areas of use of submersible dirty-water pumps as well as for draining construction-sites and dirty-water pits and sewage water handling

• Hydraulic housing and impeller made of highly resistant cast iron, pump housing made of high- grade steel and cast iron

• Outstanding performance with extraordinary discharge volume, pump head and max. grain size

• Equipped with a VORTEX free-flow wheel, thermal overload protection and a float switch

9


www.tip-pumpen.de

• Powerful and efficient unit• High-grade steel pump housing• Very sturdy pump• With 2 connection pieces

• Very powerful and efficient unit• All high-grade steel design• Very sturdy pump• With 2 connection pieces

• Especially designed contractor’s pump• Pump housing in high-grade steel and cast iron•For use under particularly extreme conditions• With 2 connection pieces

Max. flow rate


Nominal performance


Pressure port


Max. grain size

Item number


14.500 l/h

8 m / 0,8 bar

600 Watt

5 m

41,91 mm (1 1/4“ MT)

37 mm

25 mm

30264

18.000 l/h

8 m / 0,8 bar

700 Watt

5 m

47,80 mm (1 1/2“ MT)

40 mm

30 mm

30116

24.000 l/h

9 m / 0,9 bar

950 Watt

5 m

45,48 mm (1 1/2“ FT)

40 mm

35 mm

30140

Submersible dirty-water pump Submersible dirty-water pump Submersible dirty-water pump

Maxima250SX Maxima300SX Maxima400SX

TheMaximaseries-unitsforuseinextremeconditions

1,0 m2,0 m3,0 m4,0 m5,0 m6,0 m7,0 m8,0 m

17.500 l/h16.000 l/h13.500 l/h11.200 l/h8.500 l/h6.000 l/h3.000 l/h

1,0 m2,0 m3,0 m4,0 m5,0 m6,0 m7,0 m8,0 m

13.050 l/h11.650 l/h10.200 l/h

8.750 l/h7.160 l/h5.550 l/h3.300 l/h

1,0 m2,0 m3,0 m4,0 m5,0 m6,0 m7,0 m8,0 m9,0 m

20.700 l/h18.100 l/h15.600 l/h13.500 l/h10.800 l/h

7.800 l/h4.800 l/h1.800 l/h

• Versatile entry unit to the Maxima top-class series• High-grade steel pump housing • Very sturdy pump

10.500 l/h

7 m / 0,7 bar

500 Watt

5 m

41,91 mm (1 1/4“ MT)

37 mm

25 mm

30121

Submersible dirty-water pump

Maxima180SX

1,0 m2,0 m3,0 m4,0 m5,0 m6,0 m7,0 m

8.800 l/h7.400 l/h6.000 l/h4.600 l/h3.900 l/h1.900 l/h

Maxima400SX:Absolutetop-classcontractor‘spump

“The … Maxima 400 SX will carry out its duty even under the toughest load”. (German do-it-your-self magazine “Praxis”, edition March/April 2010)

IrrigationT.I.P. TECHNIK + KOMPETENZ

10

www.tip-pumpen.de

Submersible pressure pumps / Rain-water pumps

•Fordischargingwaterfromgreatdepth•Theliquidwillbeconveyedonunderhighpressure•Watersupplyandwateringfromwellsandstorage reservoirs•Specialunitsforraindrumsandnarrowshafts•Pumphousingmadeofimpact-resistantplastic, sturdy cast aluminium or top-grade steel

Submersible pressure pumps are very power-ful pumps of a specific design, meant to draw water from very deep down. The fluid lifted in this way can be transported further under a high pressure and thus be used e.g. for an irrigation system or for domestic purposes. In addition, these pumps are perfectly suited for direct irrigation out of wells, cisterns and reser-voirs.

The DIO 45/13 rain-water pump is the unit of choice when it comes to conveniently filling watering cans or operating connected wate-ring shower heads with water taken from rain barrels or similar containers. A special clamp ensures the firm grip at the container edge, with three riser-pipe elements enabling the submersion depth to be adjusted. The float switch provides an efficient protection from dry-running.

The Brio 2000-M control system enables the operation of submersible pressure pumps to be automated. In this way it is possible to use pumps for automatic water supply. This means that the liquids being discharged can be used as if tapped from the water mains. And all this with a useful side effect: The control system will also protect the pumps from damage causes by dry-running since they will stop operation in the absence of water.

The PPG 225 diaphragm pump is a submersi-ble pressure pump which was developed espe-cially for use in narrow shafts. With its vertical pump outlet and the enclosed lowering rope this particularly compact and efficient pump is suitable for use in openings down to a diame-ter of 11 cm. The reliable motor with a nominal performance of 225 W insures a delightfully low energy consumption.

• Continuously adjustable flow rate

• Three riser pipe elements for height adjustment

• Special clamp for fastening to the container edge

• Vertical pump outlet

• Float switch for automated cutting-in and cutting-out

Rain-waterpumpDIO45/13


11


www.tip-pumpen.de

• Continuously adjustable pump for emptying containers• Convenient filling of watering cans and operation of watering shower heads• Easy to install

• Very powerful pump with a high discharge capacity• Pump housing and motor shaft made of high-grade steel• For discharging water from great depth

• Energy-saving diaphragm pump for narrow shafts• Pump housing made of sturdy die-cast aluminium• For discharging water from great depth

Max. flow rate


Nominal performance


Pressure port

Well diameter min.

Max. grain size

Item number


2.700 l/h

13 m / 1,3 bar

350 Watt

5 m

26,44 mm (3/4“ MT)

-

2 mm

30263

6.000 l/h

34 m / 3,4 bar

950 Watt

7 m

41,91 mm (1 1/4“ MT)

500 mm

2 mm

30136

1.080 l/h

50 m / 5,0 bar

225 Watt

5 m

17 mm, with out thread

110 mm

P 2 mm

56000

Rain-water pump Submersible pressure pump Submersible pressure pump

DIO45/13 DRAIN 6000/36 PPG225


• Versatile support system for all submersible pumps, submersible pressure and deep-well pumps• Increased installation versatility owing to horizontal or upright positioning of the pump• Increased stability and functional safety of the pump by installing the support system to the edges of cisterns or wells• When used as a wall support, the device is ideally suited as a storage place for the pump - e.g. in periods of frost

30947

Application example

Support system (multifunctional)

TPT 20

Number of sprinklers

2 x 1 x

1,0 m2,0 m3,0 m4,0 m5,0 m6,0 m9,0 m

13,0 m

2.600 l/h2.500 l/h2.360 l/h2.120 l/h1.950 l/h1.810 l/h

800 l/h

1,0 m 1,0 m5,0 m 5,0 m

10,0 m 10,0 m15,0 m 15,0 m20,0 m 20,0 m25,0 m 25,0 m30,0 m 30,0 m34,0 m 40,0 m

45,0 m50,0 m

5.950 l/h 1.060 l/h5.800 l/h 1.020 l/h5.200 l/h 990 l/h4.500 l/h 900 l/h3.800 l/h 820 l/h2.600 l/h 760 l/h1.100 l/h 600 l/h

400 l/h220 l/h

• Submersible pressure pump in top-grade design with powerful, multistage pump mechanism for discharging water from great depth

• Pump housing and motor shaft made of top- grade steel

• Suitable for both mobile use or stationary installation

• The automated operation of the unit using the optionally available control system enables the water being discharged to be used conveniently as though it came tapped from the water mains

DRAIN6000/36:Highlyefficientsubmersiblepressurepump


12

www.tip-pumpen.de

Deep-well pumps / Cistern pumps

•Particularlyhigh-qualityworkmanship,technology and design•Fordischargingwaterfromverygreatdepth•Theliquidwillbeconveyedonunderhighpressure•Foruseinwells,cisterns,shafts•ForparticularlynarrowboreholewellsfromØ10cm•Optimallysuitedforautomatedwatersupplywhen used with special accessory for automation•All units come with a particularly long connection cable

Deep-well pumps are specifically develo-ped and most efficient submersible pressure pumps for use in particularly narrow shafts and in wells, cisterns and similar cavities. To facilitate the discharge of water from very deep down, the standard scope of delivery includes a long connection cable and a special rope for lowering and positioning the pumps.

All deep-well pumps from T.I.P. are capable of building up a pressure of 1.5 bar which is the minimum pressure required for automati-on. When installing the optional Brio 2000-M electronic controlling system which is needed for automation, the water being discharged can be used just as conveniently as if it was taken from the water mains, and moreover this feature provides an additional protection from damage caused by operation in the absence of water.

Deep-well pumps excel by their outstanding technical properties, the use of top-class ma-terials and a very high performance. Owing to their particular design, they can be used in very narrow borehole wells with diameters down to 10 cm. Their most reliable operation is guaranteed by a multistage hydraulic system and an integrated check (or non-return) valve.

The multistage hydraulic system of the deep-well pumps of the AJ 4 Plus series is equip-ped with floating impellers which have proven to be particularly resistant to the corrosive ef-fect of sand up to a contents of 50 g/m³. The compressed-ceramics ring in the diffuser and the graphite ring ensure a high durability in the case of operation in the absence of water.

• Very powerful and particularly high-quality special design in all top-grade steel design for use in cisterns - apart from that comes optimally suited for discharging water from wells and shafts

• For a versatile use of grey water - such as garden watering or the operation of irrigation systems

• Multistage hydraulic system with closed radial impellers made of Noryl

• High degree of stableness and secure positioning owing to a very solid support foot

• Comprehensive standard equipment: Solid lowering rope, high-grade suction hose made of food- proof material, intake filter with check/non-return valve, highly effective float for cistern pumps (its buoyant force insures a sufficient distance between the end of the suction line and the bottom, thus preventing particles at the bottom from being sucked in)

Cistern pump EJ 6 Plus


13


www.tip-pumpen.de

• For discharging water from very deep down• Pressure-intensive applications• High-grade steel pump housing

• For discharging water from great depth• Very large discharge volume• High-grade steel pump housing

• Very powerful unit• For discharging water from very deep down• Pressure-intensive applications• Very large discharge volume• High-grade steel pump housing

• High-quality special development in all high-grade steel design for use in cisterns and wells• For discharging water from very deep down

Max. flow rate


Nominal performance


Pressure port

Well diameter min.

Max. grain size / sand

Item number


3.300 l/h

50 m / 5,0 bar

800 Watt

20 m

39,59 mm (1 1/4“ FT)

100 mm

P 2 mm / 50 g/m3

30104

6.000 l/h

36 m / 3,6 bar

750 Watt

20 m

39,59 mm (1 1/4“ FT)

100 mm

P 2 mm / 50 g/m3

30155

6.000 l/h

57 m / 5,7 bar

1.100 Watt

20 m

39,59 mm (1 1/4“ FT)

100 mm

P 2 mm / 50 g/m3

30086

Deep-well pump Deep-well pump Deep-well pump Cistern pump

AJ4Plus55/50 AJ 4 Plus 100/36 AJ4Plus100/57 EJ 6 Plus


5,0 m10,0 m15,0 m20,0 m25,0 m30,0 m35,0 m40,0 m45,0 m50,0 m

2.950 l/h2.600 l/h2.300 l/h2.100 l/h1.900 l/h1.750 l/h1.400 l/h

950 l/h450 l/h

5,0 m10,0 m15,0 m20,0 m25,0 m30,0 m36,0 m

5.550 l/h5.150 l/h4.650 l/h4.100 l/h3.600 l/h2.700 l/h

5,0 m10,0 m15,0 m20,0 m25,0 m30,0 m35,0 m40,0 m45,0 m57,0 m

5.650 l/h5.300 l/h4.950 l/h4.650 l/h4.150 l/h3.950 l/h3.550 l/h2.950 l/h2.150 l/h

6.000 l/h

55 m / 5,5 bar

1.400 Watt

20 m

30,93 mm (1“ FT)

350 mm

0 mm

30156

5,0 m10,0 m15,0 m20,0 m25,0 m30,0 m35,0 m40,0 m45,0 m55,0 m

5.700 l/h5.450 l/h5.100 l/h4.800 l/h4.400 l/h3.950 l/h3.400 l/h2.600 l/h1.700 l/h


3 x 4 x 6 x 6 x


14

www.tip-pumpen.de

Garden pumps

Garden pumps are self-priming units. This me-ans that it is recommendable, yet not absolutely necessary, to fill the suction hose with water prior to the first use of the unit, since the pump will take in liquid independently. In this process, however, the pump housing must be complete-ly filled, i.e. vented. This means that the proce-dure has to be repeated so many times until the suction hose, too, is fully vented.

MaximumnumberofsprinklersThe max. number of sprinklers stated for pressure pumps, garden pumps and other surface pumps are subject to the following conditions:Water flow rate at the sprinkler: approx. 600 l/hWater pressure at the sprinkler: approx. 2 barSuction height: 5 m max.

The use of garden pumps enables the water being withdrawn to be conveyed on under high pressure. This means that these units are very well suitable for operating watering systems - most of the units can even be used with mul-tiple sprinklers. Moreover, the typical areas of use of garden pumps include other pressure-intensive purposes, such as the efficient flushing of terraces or boardwalks.

A suction hose of 4 metres length with check valve comes with some of our garden pumps as a convenient element of the standard scope of delivery. In addition, we offer you suction hoses of various lengths and quality grades - from solid plastic types up to professional suc-tion fitting sets in high-quality design with a very high operating-pressure rating. For the range of products offered, please refer to page 31.

•Water withdrawal from reservoirs, welds, watercourses•Fillingandemptyingofponds,basins,storagereservoirs•Wateringandoperationofirrigationsystems•Suitableformobileuseorstationaryinstallationsis•Maintenance-freemotorwiththermaloverload protection•Pumphousingmadeofplastic,castironorhigh-grade steel•Allunitsaresuitableforautomation

Garden pumps are versatile pumps for mobile use or stationary installation. They are ideally suited for pumping water out of wells, water-courses or cisterns, for instance to irrigate your garden. Their range of application also in-cludes the filling or emptying of ponds, basins or reservoir tanks. All units are equipped with a thermal motor protection.

Suctionheight ofall surface pumps:

9 m max.

Suction height:Height difference between the water surface and the pump.

Pump head:Height difference between the water surface and the point of water withdrawal. The max. delivery height is referred to as „pump head“.Example: If a pump takes in water in 5 m depth to lift it 15 m upwards, the pump head totals 20 m.

Garden pumps

15


www.tip-pumpen.de

• Reliable starter unit with pump housing made of impact-resistant plastic• Low weight• Suitable for all areas of use of garden pumps

• Smooth-running starter unit with pump housing made of solid cast iron• Very solid and reliable unit• Suitable for all areas of use of garden pumps

• Smooth-running, very powerful starter unit with housing made of solid cast iron• Suitable for continuous operation• Also very well suited for the agricultural sector, for instance for large-area watering

Max. flow rate


Nominal performance

Pressure port

Suction port

Pump housing

Cross weight

Item number


2.800 l/h

42 m / 4,2 bar

550 Watt

33,25 mm (1“ MT)

33,25 mm (1“ MT)

Plastic

6,2 kg

30124

2.800 l/h

42 m / 4,2 bar

600 Watt

30,93 mm (1“ FT)

30,93 mm (1“ FT)

Cast iron

8,6 kg

31175

4.300 l/h

50 m / 5,0 bar

1.200 Watt

30,93 mm (1“ FT)

30,93 mm (1“ FT)

Cast iron

16,4 kg

31174

Garden pump Garden pump Garden pump

GPK 46/42 Garten-Jet750 Garten-Jet 1200

Garden pumps

10 m

20 m

30 m

40 m

42 m

2.500 l/h

1.850 l/h

700 l/h

150 l/h

10 m

20 m

30 m

40 m

42 m

2.400 l/h

1.500 l/h

600 l/h

150 l/h

10 m

20 m

30 m

40 m

45 m

50 m

4.100 l/h

3.600 l/h

2.650 l/h

1.700 l/h

800 l/h

The Garten-Jet series: Smooth-running units with robust pump housing

Owing to their cast-iron pump housing, the units of the Garten-Jet series excel by their particular robustness and smooth running operation. The Garten-Jet 750, which completes all tasks of garden pumps in a highly reliable manner and with a comparably low energy consumption, is the ideal starter model in compact design. The Garten-Jet 1200 with its high efficiency degree also permits large-area watering and applications in the agricultural range.


1 x 1 x 5 x

Irrigation / Garden pumpsT.I.P. TECHNIK + KOMPETENZ

16

www.tip-pumpen.de

• Ideal starter unit to the product series equipped with high-grade steel pump housing• Suitable for all areas of use of garden pumps

• High-grade steel pump housing• Top-class unit• Comes with a suction hose (4 m) with inlet filter and check (non-return) valve

• High-grade steel pump housing• Superior unit• Comes with a suction hose (4 m) with inlet filter and check (non-return) valve• Solid metal plate included

• Absolute top-class unit with a very high performance• High-grade steel pump housing• Solid metal plate included

Max. flow rate


Nominal performance

Pressure port

Suction port

Pump housing

Cross weight

Item number


2.950 l/h

42 m / 4,2 bar

550 Watt

30,93 mm (1“ FT)

30,93 mm (1“ FT)

High-grade steel

6,3 kg

30111

4.350 l/h

50 m / 5,0 bar

1.200 Watt

30,93 mm (1“ FT)

30,93 mm (1“ FT)

High-grade steel

11,4 kg

30106

3.300 l/h

46 m / 4,6 bar

800 Watt

30,93 mm (1“ FT)

30,93 mm (1“ FT)

High-grade steel

8,9 kg

30094

5.400 l/h

50 m / 5,0 bar

1.600 Watt

30,93 mm (1“ FT)

41,91 mm (1 1/4“ MT)

High-grade steel

13,0 kg

30159

Garden pump Garden pump Garden pump Garden pump

GP3000INOX GP4500INOX/Kit Clean Jet 1000 Plus/Kit Clean Jet 1600 Plus

Garden pumps

• Very powerful garden pump in high-quality workmanship

• Pump housing made of high- grade steel

• Maintenance-free capacitor motor with thermal overload protection

• Particularly large suction port

• A solid metal plate provides for a solid standing and ease of installation in the case of stationary use

10 m

20 m

30 m

40 m

42 m

2.400 l/h

1.500 l/h

600 l/h

150 l/h

10 m

20 m

30 m

40 m

42 m

50 m

3.900 l/h

3.500 l/h

2.700 l/h

1.400 l/h

800 l/h

10 m

20 m

30 m

40 m

42 m

46 m

3.200 l/h

2.550 l/h

1.200 l/h

460 l/h

400 l/h

10 m

20 m

30 m

40 m

42 m

50 m

5.100 l/h

5.000 l/h

3.200 l/h

1.500 l/h

1.000 l/h

Clean Jet 1600 Plus: Garden pump meeting highest demands


2 x 5 x 2 x 6 x

Irrigation / General information

17


www.tip-pumpen.de

Installation and maintenance

Installation of submersible pressure pumps and deep-well pumps

MaintenanceCapacity of pumps under various conditions

When selecting a suitable pump, the desired flow rate and the required suction height - i.e. the height difference between the water surface and the point of the water withdrawal - count among the major criteria. Therefore, the information pro-vided for all pumps includes the maximum flow rate and the maximum suction height. When plan-ning an installation or selecting a pump, please consider that the flow rate will drop with the in-crease of the suction height. Diagrams given with the pumps are intended to illustrate this relation-ship, and they also provide the applicable values for different conditions. Similar considerations apply to the max. achievable pressure which will also decrease with an increase of the suction height.

Garden pumps, booster sets and automatic booster sets from T.I.P. are self-priming units. This means that it is not strictly necessary to fill the suction line, since the pump will take in liquid independently. However, it has to be ensured that the pump housing is completely filled, i.e. fully vented. Depending on the suc-tion height of the water, this process may have to be repeated several times until the suction line, too, is fully vented. This means that filling the suction line may nevertheless be recom-mendable. In any case, the inlet of the suction line has to be equipped with a check valve with an intake filter to prevent the water from escaping and coarse particles from being su-cked in. Once the line and pump vented, the system will work as desired. During operation, any inadvertent venting of the system through leaks or the like must be excluded under all circumstances. This means that all threaded and other connections on both the suction and the pressure side have to be absolutely tight. Perfect tightening results can be obtained by using Teflon tape, hemp or a similar material.

10 x (ca. 1 m)

MIN

To lower submersible pressure pumps and deep-well pumps down into cisterns, wells etc., one should always use the lowering rope coming with the unit or another suitable cable made of stainless steel or nylon. The lowering rope, the connection cable and the pressure line should be tied together at intervals of ap-prox. 2 m using an appropriate adhesive tape or cable ties to make sure that they will not get entangled when lowering or raising the pump.

Regular maintenance and thorough care will reduce the risk of operational disturbances and extend the lifetime of pumps. Where ne-cessary, it is recommendable for submersible pumps to clean the hydraulic parts by way of counter-flushing the unit with clear water through the pressure port. To facilitate the re-moval of stubborn dirt, the pump foot can be dismantled. In the case of booster sets, a re-gular check of the pressure being generated and the energy being consumed makes sense. Also, the pre-charge pressure (atmospheric pressure) in the pressure tank, which must not fall below 1.5 bar, should be checked regularly through the tank valve. The intake filter of the deep-well pumps of the AJ 4 Plus series, which can be unscrewed from the unit for this purpo-se, should be cleaned on a regular basis. In frosty conditions, submersible pumps have to be removed from the water, and in this case basically all pumps including their pipe system should be drained.

The pump has to be located at least 50 cm abo-ve the ground to prevent bottom particles from being sucked in, since they may block or even damage the unit. Please observe the max. wa-ter immersion depth which is indicated in the technical data of the pump. During operation, the intake port must always remain immersed in the water, since otherwise damage caused by overheating may occur. With regard to po-sitioning the pump this means that you should take into account fluctuations of the water level

during operation, for instance as a result of the withdrawal of liquid or seasonal changes. Some units - such as the entire AJ 4 Plus se-ries - come with a standard check valve.

10 m

20 m

30 m

40 m

42 m

50 m

5.100 l/h

5.000 l/h

3.200 l/h

1.500 l/h

1.000 l/h

Relationship between flow rate and suction height with the Clean Jet 1600 Plus garden pump serving as an example

Irrigation / AutomationT.I.P. TECHNIK + KOMPETENZ

18

www.tip-pumpen.de

Automated operation of pumps

•Watertappingjustasfromthemains•Availableforallgarden,submersiblepressure,deep- well pumps•Combinationofpumpsandcontrolsystem•Electroniccontrolsystemprotectsfromdamagecaused by operation in the absence of water•Automaticon/offfunction•Verysimple,highlyefficientinstallation•Multipleoptions,adaptabletoindividualrequirements

Automation is possible with all submersible pressure pumps, garden pumps and deep-well pumps from T.I.P. By installing an electronic or mechanical control system you can use the discharged fluid the same way as if you took it from the water mains: By simply opening or closing water taps. Apart from that, electronic control systems will protect your pump from damage caused by dry-running since these systems will cut out automatically in the ab-sence of water.

The automated operation of a pump offers nu-merous benefits. For instance, it is possible to use water taken from wells or rainwater col-lected in cisterns for domestic water provision, e.g. for the operation of washing machines, showers or toilet flushing systems. Owing to its high efficiency and reliability, an automated pump will also convince when used for water-ing or the operation of sprinklers.

Electronic control systems will provide a pump control as a function of pressure and water flow rate. The Brio 2000-M control system will switch the pump on either when the tap is opened or as soon as pressure has dropped to a specific minimum value. When water tapping stops, the pump will switch off. The ON pres-sure can be set individually.

Mechanical control systems will control the pump on the basis of an interaction between a pressure tank and the ON and OFF pressure. They will switch the pump on by enabling the current to flow. When the water-consuming ap-pliance is switched off or the tap is shut, thecurrent supply will be cut out, and the pump will switch off. The ON and OFF pressure can be set by a mechanic.

The cut-in and cut-out pressure can be set individually

Automation:Veryeasyinstallation-highefficiency

In order to be actually used for automation, a pump has to be able to build up a mini-mum pressure of 1.5 bar. This basic condi-tion is met by all garden, submersible pres-sure, cistern and deep-well pumps from T.I.P. Installation requires only a minimum of action. The control system, for instance, can be mounted directly onto the pump. As an alternative, a hose can be fitted between the pump and the control system. Another possibility of automation consists in fitting the pump with a pressure tank, an armoured hose and a pressure switch. Optionally, the pump and the pressure tank can be fitted directly to each other or connected by a hose.

Automatic booster setsHWA4500INOX:High-CapacityAutomatedBoosterSet

Irrigation / Automatic booster sets

19


www.tip-pumpen.de

• Unit in high-quality workmanship• High-grade steel pump housing• Electronic pump control and pressure gauge• Solid metal plate included

• Very powerful unit in high-quality workmanship• High-grade steel pump housing• Electronic pump control and pressure gauge• Solid metal plate included

Max. flow rate


Nominal performance

Pressure port

Suction port

Pump housing

Cross weight

Item number


2.800 l/h

42 m / 4,2 bar

550 Watt

33,25 mm (1“ MT)

30,93 mm (1“ FT)

High-grade steel

7,3 kg

31142

4.350 l/h

50 m / 5,0 bar

1.200 Watt

33,25 mm (1“ MT)

30,93 mm (1“ FT)

High-grade steel

11,1 kg

31193

Automatic booster set Automatic booster set

HWA3000INOX HWA4500INOX

The Brio 2000-M electronic control system excels by its extremely high reliability and functional safety. Easily and instantly installed, the Brio 2000-M allows the automation of any kind of pressure pump capable of genera-ting a minimum of 1.5 bar. Unlike the cut-out pressure, the cut-in pressure is adjustable, since after closing the water tap cutting out will occur automatically as a function of perfor-mance. The Brio 2000-M is equipped with a pressure gauge for accurate pressure control. As an additional benefit, the Brio 2000-M will cut out the pump in the absence of water and thus prevent the pump from damage caused by dry-running.

An automatic booster set corresponds to the combination of a garden pump with an elec-tronic control system. Our broad and careful-ly scaled range of garden pumps provides a variety of options, which allow the purposeful realisation of individual requirements. In additi-on, with the HWA 3000 INOX and HWA 4500 INOX, our range of products includes two con-ventional automatic booster sets in high-grade workmanship.

10 m

20 m

30 m

40 m

42 m

2.400 l/h

1.500 l/h

600 l/h

150 l/h

10 m

20 m

30 m

40 m

42 m

50 m

3.900 l/h

3.500 l/h

2.700 l/h

1.400 l/h

800 l/h

• Very powerful automated booster set in high-quality workmanship for watering, irrigation, domestic water supply with grey water, use of collected rainwater

• Pump housing made of high-grade steel

• Pressure gauge to facilitate monitoring of the operating pressure

• Electronic pump control provides additional protection from damage caused by dry-running

• A solid metal plate provides for a solid standing and ease of installation in the case of stationary use


2 x 5 x

Automatic water supplyT.I.P. TECHNIK + KOMPETENZ

20

www.tip-pumpen.de

Booster sets

•Domesticwatersupplywithgreywater•Pressureincreaseinthedomesticwatersystem•Automatedwateringusingsprinklers•Withdrawalofwaterataconstantpressure•Largetankforoptimumpressureequalisation•Unitswithantidry-runningfeatureandprefilter•Pumphousingmadeofimpact-resistantplastic, sturdy cast or top-grade steel•Allunitssuppliedwithfood-proofdiaphragm

Domestic water supply counts among the key applications of booster sets. In an increasing number of households, people rather use rain, grey or groundwater for many applications in-stead of expensive and valuable drinking wa-ter taken from the mains. This makes sense, for instance, for flushing toilets, operating washing machines or supplying showers - and of course for irrigation.

Almost all booster sets from T.I.P. are equip-ped with a mechanical control system. Upon reaching the cut-in or cut-out pressure, usually preset to 2 or 3 bar, respectively, the pump will cut in or cut out. Changing these preset values which are ideally suited for most installations must only be done by a qualified plumbing or electrical expert.

Automatic irrigation is one of typical ranges of applications for which booster sets are espe-cially suited. Normally, the expansion of the long flexible hoses which are commonly used is responsible for a pressure drop within the system. The size of the large tank of a boo-ster set compensates for this and prevents the pump from cutting in again.

Pressure boosting in a domestic water system may be necessary for various reasons. For in-stance in the top storeys the water frequently arrives with a poor pressure. In such cases the installation of a booster set to act as a pressu-re-increasing system is recommendable. The cut-in and the cut-out pressure can be set very specifically, so that the insufficient pressure provided in the domestic water system can be increased to highly accurate target values.

The cut-in and cut-out pressurecan be set individually

Anti dry-running feature andprefilter

An anti dry-running feature prevents the hy-draulic parts of pumps from possible overhe-ating occurring as a result of operating the pump in the absence of liquid. This so-called dry-running is frequently the reason of consi-derable damage to the unit. The anti dry-run-ning feature consistently suppresses this risk since it causes the pump to cut out in time.

Prefilters are recommended as accessories, in particular for self-priming pumps. They will extend the lifetime of the pump since they fil-ter out efficiently sand and solid matters from the fluid being conveyed. The high-quality fil-ter mesh made of highly impact-resistant pla-stic can be cleaned conveniently so that it can be used over and over again. Some booster sets come with an anti dry-running feature and/or a prefilter as a standard. Units without these features can be retrofitted without any problems. You will find the appropriate acces-sories on pages 32 and 33.

Booster sets

21


www.tip-pumpen.de

• Solid starter unit• Plastic pump housing• 18 L pressure tank• Compact design• Low weight

• Proven starter unit• Pump housing made of cast iron• 18 L pressure tank• Compact design• Very smooth-running pump

• Extremely powerful unit• Pump housing made of cast iron• 24 L pressure tank• Large discharge volume and pressure• Very smooth-running pump

• Powerful unit• High-grade steel pump housing• 18 L pressure tank• Compact design

Max. flow rate


Nominal performance

Pressure port

Suction port

Pump housing / Pressure tank

Cross weight

Item number


2.800 l/h

42 m / 4,2 bar

550 Watt

33,25 mm (1“ MT)

33,25 mm (1“ MT)

Plastic / Steel

12,3 kg

31202

2.800 l/h

42 m / 4,2 bar

600 Watt

30,93 mm (1“ FT)

30,93 mm (1“ FT)

Cast iron / Steel

14,7 kg

31300

4.300 l/h

50 m / 5,0 bar

1.200 Watt

30,93 mm (1“ FT)

30,93 mm (1“ FT)

Cast iron / Steel

23,0 kg

31111

3.600 l/h

40 m / 4,0 bar

650 Watt

30,93 mm (1“ FT)

30,93 mm (1“ FT)

High-grade steel / Steel

13,1 kg

31188

Booster set Booster set Booster set Booster set

HWK 46/42 HWW900/25Plus HWW1200/25 HWW 3600 I

Booster sets

• Smooth-running, self-priming booster sets with pump housings made of robust cast iron and pressure tanks made of painted steel

• For discharging water at constant pressure, domestic water supply with grey water, pressure boosting, watering, irrigation


• Compact, space-saving, lightweight units coming with an 18 L pressure tank

• Units with a large 24 L pressure tank for an increase of the water supply and a reduction of the cut-in/cut-out frequency

• All units come with a pressure gauge and a food-proof diaphragm

10 m

20 m

30 m

40 m

42 m

2.400 l/h

1.500 l/h

600 l/h

150 l/h

10 m

20 m

30 m

40 m

42 m

2.500 l/h

1.850 l/h

700 l/h

150 l/h

10 m

20 m

30 m

40 m

42 m

50 m

4.100 l/h

3.600 l/h

2.650 l/h

1.700 l/h

800 l/h

10 m

20 m

30 m

40 m

3.200 l/h

2.430 l/h

1.250 l/h

The robust series: Cast-iron pump housings


1 x 1 x 5 x 2 x


22

www.tip-pumpen.de

Max. flow rate


Nominal performance

Pressure port

Suction port


Cross weight

Item number


Booster sets

• Powerful unit• High-grade steel pump housing• 24 L pressure tank• Anti dry-running feature• High-quality prefilter

3.300 l/h

46 m / 4,6 bar

800 Watt

30,93 mm (1“ FT)

30,93 mm (1“ FT)


14,6 kg

31141

Booster set

HWW1000/25PlusTLSF

10 m

20 m

30 m

40 m

42 m

46 m

3.200 l/h

2.550 l/h

1.200 l/h

460 l/h

400 l/h

• Powerful unit• High-grade steel pump housing• 24 L pressure tank• High-quality prefilter

3.300 l/h

46 m / 4,6 bar

800 Watt

30,93 mm (1“ FT)

30,93 mm (1“ FT)


14,2 kg

31144

Booster set

HWW1000/25PlusF

10 m

20 m

30 m

40 m

42 m

46 m

3.200 l/h

2.550 l/h

1.200 l/h

460 l/h

400 l/h

• Powerful and efficient unit• High-grade steel pump housing• 24 L pressure tank• Anti dry-running feature

3.300 l/h

46 m / 4,6 bar

800 Watt

30,93 mm (1“ FT)

30,93 mm (1“ FT)


13,9 kg

31145

Booster set

HWW1000/25PlusTLS

10 m

20 m

30 m

40 m

42 m

46 m

3.200 l/h

2.550 l/h

1.200 l/h

460 l/h

400 l/h

• Powerful unit• High-grade steel pump housing• 24 L pressure tank

3.300 l/h

46 m / 4,6 bar

800 Watt

30,93 mm (1“ FT)

30,93 mm (1“ FT)


13,5 kg

31146

Booster set

HWW1000/25Plus

10 m

20 m

30 m

40 m

42 m

46 m

3.200 l/h

2.550 l/h

1.200 l/h

460 l/h

400 l/h

The higher graded series: High-grade-steel pump housing

• Self-priming booster sets with pump housings made of high-grade steel and pressure tanks made of painted steel



• Units equipped with a high-quality prefilter and/or a very efficient anti dry-running feature

• All units with a large 24 L pressure tank for an increase of the water supply and a reduction of the cut-in/cut-out frequency

• All units come with a pressure gauge and a food-proof diaphragm


2 x 2 x 2 x 2 x

Booster sets

23


www.tip-pumpen.de

Max. flow rate


Nominal performance

Pressure port

Suction port


Cross weight

Item number


Booster sets

• Powerful and efficient unit• High-grade steel pump housing• 24 L pressure tank• Anti dry-running feature• High-quality prefilter

4.200 l/h

50 m / 5,0 bar

1.200 Watt

30,93 mm (1“ FT)

30,93 mm (1“ FT)


17,2 kg

31157

Booster set

HWW1300/25PlusTLS/F

10 m

20 m

30 m

40 m

42 m

50 m

3.800 l/h

3.100 l/h

2.500 l/h

1.200 l/h

1.100 l/h

• Powerful and efficient unit• High-grade steel pump housing• 24 L pressure tank• Anti dry-running feature

4.200 l/h

50 m / 5,0 bar

1.200 Watt

30,93 mm (1“ FT)

30,93 mm (1“ FT)


16,4 kg

31158

Booster set

HWW1300/25PlusTLS

10 m

20 m

30 m

40 m

42 m

50 m

3.800 l/h

3.100 l/h

2.500 l/h

1.200 l/h

1.100 l/h

• Powerful and efficient unit• High-grade steel pump housing• 24 L pressure tank

4.200 l/h

50 m / 5,0 bar

1.200 Watt

30,93 mm (1“ FT)

30,93 mm (1“ FT)


16,0 kg

31147

Booster set

HWW1300/25Plus

10 m

20 m

30 m

40 m

42 m

50 m

3.800 l/h

3.100 l/h

2.500 l/h

1.200 l/h

1.100 l/h

• Particularly powerful unit with very large discharge volume• High-grade steel pump housing• 24 L pressure tank• Anti dry-running feature

5.400 l/h

50 m / 5,0 bar

1.600 Watt

30,93 mm (1“ FT)

41,91 mm (1 1/4“ MT)


18,6 kg

31148

Booster set

HWW1600/25PlusTLS

10 m

20 m

30 m

40 m

42 m

50 m

5.100 l/h

5.000 l/h

3.200 l/h

1.500 l/h

1.000 l/h


4 x 4 x 4 x 6 x


24

www.tip-pumpen.de

• Reliable starter unit in all high-grade steel series• Pump housing and pressure tank made of high-grade steel• 24 L pressure tank

• Powerful and efficient unit• Pump housing and pressure tank made of high-grade steel• 24 L pressure tank

• Powerful and efficient unit• Pump housing and pressure tank made of high-grade steel• 24 L pressure tank• High-quality prefilter

• Particularly powerful unit with very large discharge volume• Pump housing and pressure tank made of high-grade steel• 24 L pressure tank• Anti dry-running feature

Max. flow rate


Nominal performance

Pressure port

Suction port


Cross weight

Item number


2.950 l/h

42 m / 4,2 bar

550 Watt

30,93 mm (1“ FT)

30,93 mm (1“ FT)

High-grade steel

12,2 kg

31143

4.350 l/h

50 m / 5,0 bar

1.200 Watt

30,93 mm (1“ FT)

30,93 mm (1“ FT)

High-grade steel

16,2 kg

31140

4.200 l/h

50 m / 5,0 bar

1.200 Watt

30,93 mm (1“ FT)

30,93 mm (1“ FT)

High-grade steel

17,1 kg

31155

5.400 l/h

50 m / 5,0 bar

1.600 Watt

30,93 mm (1“ FT)

41,91 mm (1 1/4“ MT)

High-grade steel

18,5 kg

31163

Booster set Booster set Booster set Booster set

HWW3000INOX HWW4500INOX HWWINOX1300PlusF HWWINOX1600TLS

High-grade steel booster sets

• Self-priming booster sets with pump housings and pressure tanks made of high-grade steel


• Very solid units, therefore particularly suited for installation in shafts


• Units equipped with a high-quality prefilter and/or a very efficient anti dry-running feature

• All units come with a large 24 L pressure tank, a pressure gauge and a food-proof diaphragm

10 m

20 m

30 m

40 m

42 m

2.400 l/h

1.500 l/h

600 l/h

150 l/h

10 m

20 m

30 m

40 m

42 m

50 m

3.900 l/h

3.500 l/h

2.700 l/h

1.400 l/h

800 l/h

10 m

20 m

30 m

40 m

42 m

50 m

3.800 l/h

3.100 l/h

2.500 l/h

1.200 l/h

700 l/h

10 m

20 m

30 m

40 m

42 m

50 m

5.100 l/h

5.000 l/h

3.200 l/h

1.500 l/h

1.000 l/h

The top workmanship series: All high-grade steel units


1 x 5 x 4 x 6 x

General information

25


www.tip-pumpen.de

It takes just a few calculations to find out the suita-ble type of booster set for your requirements. First of all, use the opposite chart to determine your max. water consumption.Example: If you wish that your bath tub, dishwas-her and washing machine can be used at the same time, you simply add up the individual values and arrive at 33 l/min for the max. water consumption. Multiplied by 60, this leads to the water volume per hour: 792 l/h.The next thing to do is to calculate the total dischar-ge height. First of all, you need the actual dischar-ge height - i.e. the height difference between the water surface and the highest place of withdrawal, increased by 15% to allow for the calculation of friction losses. Subsequently, you consider the re-quired min. pressure which is defined by the con-sumer device with the highest operating pressu-re. The pressure, here indicated in terms of bar, is then to be multiplied by 10 to convert it to metres. Adding the two values will result in the arithmetical

total discharge height.Example: Your booster set is supposed to be able to withdraw water from a depth of 4 m and convey it to the highest withdrawal place in 6 m height (actual discharge height = 10 m). Increa-sed by 15%, you arrive at 11.15 m.The minimum pressure is supposed to be 2 bar. When converted, this corresponds to 20 m. When adding up these values (11.5 m plus 20 m) you will arrive at the total discharge height of 31.5 m.On the basis of the calculated max. water con-sumption and the mathematical total dischar-ge height, all you need to do is to refer to the discharge volume and discharge height charts for the specific booster set to see whether a spe-cific product will fit your requirements. For in-stance, you will see on page 21 that the HWW 3600 I (30 m / 1,250 l/h) will actually satisfy your needs, whereas the HWW 46/42 (30 m / 700 l/h) will not.

How to determine the appropriate booster set

Delivery height (HM) + 10 mFriction loss (15%) + 1,5 m = 11,5 mMin. pressure* + 20 mTotal delivery height = 31,5 m

* Min. delivery pressure 2,0 bar W 20 m delivery height

HM

Water consumption:Sink: 6 L/minBath tub: 15 L/min Shower: 10 L/minWashing machine: 10 L/minDishwasher: 8 L/minCistern (toilet flush-ing tank): 4 L/min

min. 10 l/min

Calculation example of the total delivery height

Automated water supply with pump and pressure tank

Functioningofthepressuretank

Installing a garden, deep-well or submersible pressure pump in combination with a pressure tank will produce an automated water supply system offering the functioning and benefits of a booster set: Pressure equalisation and reduced switching frequency. Besides the pressure tank, the basic equipment requires the following components: An electronic con-trol system or a pressure switch for automated operation, a pressure gauge for pressure mo-nitoring, a 3-way diverter for various connec-tions and an armoured hose for connecting the pressure tank. It is e.g. possible to install a hose of some length between the pump and the tank. In this way the pump can be installed in a cistern, and the water being discharged can then be conveyed into the house where the pressure tank is installed, may be together with a pre-filter. This example is a highly effici-ent system for domestic water supply.Together with the necessary accessories which you find from page 31 it is possible to achieve highly versatile and efficient solutions.

As is generally the case with booster sets, the pressure tank plays a major role for automated water supply. The larger the pressure tank, the less frequently will the pump have to cut in or cut out, respectively. The underlying principle is as simple as that: If you tap a small quantity of liquid, such as a glass of water, the water volume contained in the pressure tank will pre-vent the pump from cutting in. With the size of the tank, the volume of the liquid contained in it will also increase, which means that the pump will have to cut in less frequently. Considering

that each start of the pump requires electricalenergy, the reduction of the cut-in frequency will clearly reduce the energy consumption, thus saving costs. As another positive side ef-fect of the reduced number of cut-in operations the noise caused by the start and operation of the pump will be reduced.Booster sets from T.I.P. are equipped with pressure tanks of different sizes, ranging from 18 to 24 L volume. As a special unit, we offer the HWW 1300/50 Plus TLS which comes

with a particularly large 50 L pressure tank. In this way, the bandwidth ranges from compact, space-saving low-weight models up to particu-larly large units. These differences enable an on-site selection to be made on the basis of individual criteria and specific conditions.

oder

oder

The HWW 1300/50 Plus TLS booster set is the ideal device for users who attach great importance to a clearly reduced switching fre-quency. In particular in context with domestic water supply in grey water, this is an important criterion since the resulting decrease of the switching frequency will also reduce the noise level involved with the start and operation of the pump. This noise may be extremely distur-bing, in particular in times of silence or at night-time, and it may be considerably decreased by selecting a pump that is equipped with a large pressure tank.


26

www.tip-pumpen.de

• Very large 24 L pressure tank• Integrated anti dry-running feature• High-grade-steel pump housing• Suitable for all areas of use of booster sets - in particular to be used as a pressure increase system

Max. flow rate


Nominal performance

Pressure port

Suction port


Cross weight

Item number


4.200 l/h

50 m / 5,0 bar

1.200 Watt

30,93 mm (1“ FT)

30,93 mm (1“ FT)


21,2 kg

31311

Booster set with 50 L pressure tank

HWW1300/50PlusTLS

10 m

20 m

30 m

40 m

42 m

50 m

3.800 l/h

3.100 l/h

2.500 l/h

1.200 l/h

1.100 l/h

Special booster set designed to save energyBoosterset:HWW1300/50PlusTLS

The HWW 1300/50 Plus TLS special booster set is equipped with a very powerful, self pri-ming pump with a housing made of high-grade steel. With its considerable max. discharge flow rate and its high maximum pressure, in combination with the large pressure tank and the armoured hose, this unit is best suited for all application areas of booster sets, in particu-lar for domestic water supply and as a pressure increase system. This superior type is rounded off by an integrated anti dry-running feature.


4 x

The capacity of the pressure tank is of a very high signi-ficance with regard to the functioning and efficiency of a booster set.Compared to smaller designs, a larger tank will ensure an increased water supply. This means a clearly improved pressure equalisation so that the operation of the booster set requires a reduced number of switching actions. As a pleasant side consequence both the electricity consump-tion and the operating noise will be reduced - besides, the reduced switching frequency leads to a more sparing operation of the unit.Quite a few booster sets from T.I.P. come with a relatively large sized pressure tank in their standard version. In most cases, this is a pressure tank with a volume of 24 litres.With the HWW 1300/50 Plus TLS, we have designed a device with a pressure tank volume of 50 litres, which means a volume of more than double the standard size. In this way we provide the user with totally new options to plan their installation even more purposeful - based on their specific wishes and particular requirements.

Particularlyefficentowingtolarge50Lpressuretank

While conventional booster sets are equipped with just a suction line, the units conceived for deep intake feature an additional circulation line with a separate port. When the liquid is su-cked in, a part of the water is led back through the circulation line into an injector. This gene-rates the pressure that is needed for taking in water from great depth.

Automatic water supply

27


www.tip-pumpen.de

• Special development for deep intake down to 20 m• Special water recirculation system using an injector and circulation line• Very smooth-running unit with pump housing made of cast iron• Suitable for all typical areas of use of booster sets

Max. flow rate


Nominal performance

Pressure port

Suction port


Cross weight

Item number

Flow rate depending on the suction height

2.600 l/h

45 m / 4,5 bar

1.000 Watt

30,93 mm (1“ FT)

39,59 mm (1 1/4“ FT)

Cast iron / Steel

23,0 kg

31078

Booster set for deep intake

HWW AP 1000 N 20

Delivery height

Suction height 10 m 15 m 25 m 35 m

10 m 40 l/min 32 l/min 18 l/min 8 l/min

15 m 35 l/min 28 l/min 14 l/min 4 l/min

20 m 24 l/min 16 l/min 10 l/min –

Special booster set for deep intakeBooster set: HWW AP 1000 N 20

max.20 m

max.45m

In the case of self-priming pumps, physical laws usually restrict the suction height to a maximum of 9 m. Owing to an innovative water recirculating process the HWW AP 1000 N 20is capable of extending the suction depth down to 20 m. This permits particularly deep-lying water resources to be used efficiently for all typical areas of application of booster sets.

Special pumpsT.I.P. TECHNIK + KOMPETENZ

28

www.tip-pumpen.de

Petrol-engine pumps

•Operationindependentoftheelectricalmains•Idealpumpsforuseinallotmentgardens,weekend homes, agricultural applications, and on construction- sites•Pumphousingmadeofaluminium•Drainage,irrigation,evacuation,emergencydrainage•Robust,air-cooled4-strokeengines•Easyenginestartbymeansofaropepull

Petrol-engine pumps have proven to be the op-timum solution in places which are far from the electrical mains. The LTP series includes units of a very high quality equipped with robust, power-ful 4-stroke engines. The convenient equipment includes connection pieces for the pressure- and suction-side ports, an integrated non-return flap on the suction side and an oil-level protec-tion feature (Auto-Stop).

Starting on page 31, you will find high-quality ac-cessories for the LTP series - for instance, hoses with large dimensions which are also available by the metre. Professional installations can be reali-sed using joint bolt clips, connection pieces and brass foot valves.The reducing piece coming with the LTP 40 ser-ves to reduce the connection dimension from 47,80 mm (1 ½“ MT) to 41,91 mm (1 ¼“ MT).

For agricultural use, such as watering or irriga-tion, petrol-engine pumps with their very high flow rates have proven to be almost perfectly suited. The typical areas of use include em-ptying or filling of ponds and basins far away from any available electrical connection, or the water supply of construction-sites, allotment gardens, weekend homes or garden sheds.

During inundations, the electricity supply fre-quently collapses so that electrical pumps cannot be used for emergency drainage. Also, flooding leads to situations where the use of an electrically driven pump is not advisable for reason of the ha-zard of an electrical shock. In emergency cases like that, petrol-engine pumps with their large ca-pacity are the almost perfect solution.

Dirty air filters will obstruct the airflow to the carburettor. To avoid functional disturbances, this means that the air filter should be in-spected regularly and cleaned or replaced, if necessary. Generally, it is recommended to check the air filter for contamination prior to each use. The filter should be cleaned at the latest every three months or after 50 hours of operation. If the unit is used in a highly con-taminated or dusty environment, the cleaning intervals ought to be shortened appropriately.

The careful maintenance and care of petrol-engine pumps include the check of the oil level prior to each start of the unit. The units of the LTP series are equipped with an Auto-Stop feature. This convenient feature pro-tects the unit from damage caused by the absence of oil, since the motor cannot be started unless a sufficient quantity of motor oil is available. The oil should be changed at least once per year. In this context, obser-ving the local regulations regarding the dis-posal of waste oil is imperative.The cleaning of the spark plug and, where necessary, a correction of the electrode gap should be performed every six months or af-ter 100 hours of operation.

Maintenance of petrol-engine pumps

Petrol-engine driven water pumps

29


www.tip-pumpen.de

Flow rate max.

Pressure max.

Delivery height max.

Suction height max.

Cylinder capacity

Power max.

Pressure port

Suction port

Tank volume

Fuel

Liquid temperature min. / max.

Item number


10.000 l/h

1,5 bar

15 m

4 m

97,7 ccm

1,1 kW (1,5 HP)

47,80 mm (1 1/2“ MT), 40 mm

47,80 mm (1 1/2“ MT), 40 mm

1,4 l

Petrol, unleaded

2 °C / 35 °C

30131

25.000 l/h

2,6 bar

26 m

6 m

196 ccm

3,8 kW (5,1 HP)

59,61 mm (2“ MT), 50 mm

59,61 mm (2“ MT), 50 mm

3,6 l

Petrol, unleaded

2 °C / 40 °C

30132

48.000 l/h

3,0 bar

30 m

6 m

196 ccm

3,8 kW (5,1 HP)

87,88 mm (3“ MT), 75 mm

87,88 mm (3“ MT), 75 mm

3,6 l

Petrol, unleaded

2 °C / 40 °C

30129

Petrol-engine pump Petrol-engine pump Petrol-engine pump

LTP40/10 LTP50/25 LTP80/48

Petrol-engine pumps

1 m

4 m

8 m

12 m

15 m

9.950 l/h

9.900 l/h

8.800 l/h

6.700 l/h

1 m

4 m

8 m

12 m

16 m

20 m

24 m

26 m

24.900 l/h

24.700 l/h

24.500 l/h

23.100 l/h

20.800 l/h

17.000 l/h

11.100 l/h

1 m

4 m

8 m

12 m

16 m

20 m

24 m

30 m

47.800 l/h

47.600 l/h

47.000 l/h

44.500 l/h

41.200 l/h

36.000 l/h

29.000 l/h

Special pumpsT.I.P. TECHNIK + KOMPETENZ

30

www.tip-pumpen.de

1 m

5 m

10 m

15 m

20 m

25 m

30 m

35 m

34 l/min

27,5 l/min

21,5 l/min

16,5 l/min

11 l/min

7 l/min

3,5 l/min

Special pump for discharging fuel

•Robustperipheralpumpfordischargingdieselfuel, fuel oil and rapeseed oil•Pumphousingmadeofcastiron•Impellermadeofbrass•Suitableforfuellingvehicles•Fillingoremptyingoffueloiltanks•Comescompletewithgun-typefuellingnozzle, fuelling hose, suction hose and brass foot valve

Discharging liquids such as diesel fuel, fuel oil and rapeseed oil is only possible with pumps which were especially designed for these purposes. The MultiOil 35 M is a very robust special development suited for filling and emptying fuel oil tanks or for fuelling trucks, cars, construction and agricultural machines with diesel fuel and rapeseed oil. The pump housing made of cast-iron and the impeller made of brass guarantee a long lifetime. The MultiOil 35 M comes completely equipped with a gun-type fuelling nozzle, a fuelling hose, a suction hose and a brass foot valve.

Flow rate max.

Delivery height max.

Pressure max.

Nominal performance

Pressure port

Suction port

Suction height max.

Liquid temperature max.

Impeller

Power cord

Weight

Item number


35 l/min (2.100 l/h)

35 m

3,5 bar

550 Watt

30,93 mm (1“ FT)

30,93 mm (1“ FT)

5 m

40 °C

Brass

1,5 m

10,8 kg

30070

Special pump

MultiOil35M

Accessories

31


www.tip-pumpen.de

Drainage hose, 10 m, infinitely extendable. Suitable for connec-tion not only to submersiblepumps, but also to submersible pressure pumps since the hose will stand pressures up to 6 bar. For feeding on clean and slightly soiled water from swimming pools, basins, ponds, cisterns etc.Accessory items: Connection pieces for pumps with 30.93 mm (1” FT), 33.25 mm (1” MT),39.59 mm (1¼“ FT) and41.91 mm (1¼“ MT).

For suction and pressure appli-cations up to 6 bar operating pres-sure and 60 % vacuum. Made of kink and abrasion-proof material. Covered hard-PVC helix; comes complete with a threaded brass high-pressure suction coupling piece with GK connector, brass foot valve with high-grade steel coarse filter and brass clamping brackets. Professional accessory item for all garden pumps, booster sets and automatic booster sets.

The large interior diameter (28 mm) ensures a speedy drainage and minimises the risk of clog-ging. Infinitely extendable when connected to additional drainage hoses.For feeding on clean and soiled water from the cellars, basins, ponds, cisterns etc.Accessory items: Connection pieces for pumps with 30.93 mm (1” FT), 33.25 mm (1” MT),39.59 mm (1¼“ FT) and41.91 mm (1¼“ MT).

Professional design. Made of kink and abrasion-proof material. Cove-red hard-PVC helix. For suction/pressure applications up to:40 mm (1 ½“) - 6 bar operating pressure and 60 % vacuum50 mm (2“) - 5 bar operating pres-sure and 50 % vacuum 75 mm (3“) - 4 bar operating pres-sure and 40 % vacuum

Professional design. Made of kink and abrasion-proof material. Cove-red hard-PVC helix. For suction/pressure applications up to:40 mm (1 ½“) - 6 bar operating pressure and 60 % vacuum50 mm (2“) - 5 bar operating pres-sure and 50 % vacuum 75 mm (3“) - 4 bar operating pres-sure and 40 % vacuum

Suction hose set made of plastic. Comes complete with coarse inlet filter and integrated check valve.For garden pumps, booster sets and automatic booster sets.Special design for use with gar-den pump starter sets.Accessory items: Connection pieces for pumps with 33.25 mm (1” MT) and 30.93 mm (1“ FT).

For suction and pressure appli-cations up to 6 bar operating pressure and 60 % vacuum. Made of kink and abrasion-proof material. Covered hard-PVC helix; comes with a brass foot valve with high-grade steel coarse filter and brass connector for connection to the pump. Suitable for all garden pumps, booster sets and automa-tic booster sets.Accessory items: Connection pieces for pumps with 30.93 mm (1” FT) and 33.25 mm (1” MT).

Foot valve, complete, brass

; Joint bolt clip

= GK connection piece, brass

10 mItem number 31008




75 mm (3“) / rmItem number 30933

75 mm (3“) / 50 mItem number 30936

50 mm (2“) / rmItem number 30932

50 mm (2“) / 50 mItem number 30935

40 mm (1 ½“) / rmItem number 30931

40 mm (1 ½“) / 50 mItem number 30934





50,8 mm (2“)Item no. 30938

40 mm (1 ½“)Item no. 30937

Ø 43 - 47 mm / Width: 18 mmfor 40 mm (1 ½“) hosesItem no. 30948 Ø 54-58 mm / Width: 20 mmfor 50 mm (2“) hosesItem no. 30949 Ø 79-85 mm / Width: 25 mmfor 75 mm (3“) hosesItem no. 30950

45,48 mm (1 ½“FT)Item no. 30946

Drainage hoseclean water, 10 m

PROFIbrasssuctionset4 m / 7 m

Drainage hosedirty water, 10 m

Pump spiral hose for large-scale pumps (petrol-engine pumps)

Suction set4 m / 7 m

Pump spiral hose for large-scale pumps (petrol-engine pumps)

ECObrasssuctionset4 m / 7 m

Hose accessories

;

=


32

www.tip-pumpen.de

Accessories

For floating withdrawal of rainwa-ter from cisterns, containers, wells etc.Prevents dirt particles such as sand from being sucked in from the bottom.To be used in combination with the inlet hose for cistern pumps(Item number 30913).

Prefilter for use with garden pumps and booster sets. This filter will extend the lifetime of the pump. It consists of three sections, with threaded ring for filter glass. Brass bleeding screw, high-quality30,93 mm (1” FT) connection thread made of brass, including washable filter cartridge for sand and solids. Transparent filter cham-ber made of highly impact-resistant plastic.Max. flow rate 7.000 l/h

Food-proof, pressure resistant hose for floating withdrawal of rainwater from cisterns, contai-ners, wells etc.Prevents dirt particles such as sand from being sucked in from the bottom.Connection 39.59 mm (1 ¼“ FT), and 33,25 mm (1“ MT)Length 2,4 mTo be used in combination with the ball-type float for cistern pumps (Item number 30914).

Disposable fibre filter cartridge for filtering out sand and solids. Filtering effect 80 µ.

; Washable plastic filter cartridge for sand and solids.

Heavy-duty nylon lowering rope.Suitable to be fastened to sub-mersible pumps for lowering them down into shafts.

Active carbon filter for removing chlorine, odours, taste and cloudi-ness from the mains water.Recommended flow rate: 12 l/min

; Polyphosphate special filter for lowering mains water hardness. Provides efficient protection from calcination and also protects from damage caused by corrosion.Recommended flow rate: 4 l/min

Active carbon filter cartridgeFor use in active carbon water filter, item number 31081 - to improve water quality.

; Polyphosphate filter cartridgeFor use in polyphosphate water filter, item number 31084 - for removing mains water hardness.

Item number 30914

G 10, 254 mm (10“)Item number 31050

G 7, 178 mm (7“)Item number 31058

G 5, 127 mm (5“)Item number 31052

Item number 30913 20 mItem number 30912

G 10, 254 mm (10“)Item number 31084

G 10, 254 mm (10“)Item number 31081

254 mm (10“) for filter G 10Item number 31082

Item number 30947

;254 mm (10“) for filter G 10Item number 31083

Ball-typefloatwithfootvalvefor cistern pumps

Multi-purposewaterfilterG5/G7/G10

Inlet hose with connection piece for cistern pumps

DisposablefiltercartridgesReusablefiltercartridges

Loweringrope20 m

ActivecarbonspecialfilterPolyphosphatespecialfilter

TPT 20 support system(multifunctional)

ActivecarbonfiltercartridgePolyphosphatefiltercartridge

Versatile support system for all submersible pumps, submersible pressure and deep-well pumps.Increased installation versatility owing to horizontal or upright positioning of the pump.Increased stability and functional safety of the pump by installing the support system to the edges of cisterns or wells.When used as a wall support, the device is ideally suited as a storage place for the pump - e.g. in periods of frost.

254 mm (10“) for filter G 10Item no. 31051






; ; ;

;

;

33


www.tip-pumpen.de

Accessories

Pressure gaugeFor accurate pressure control. Measuring range up to 6 bar max.Connection port 13,16 mm (1/4“ MT)

; Pressure switchUsed to automate the on / offfunction in combination with theappropriate additional accessories.Connection port 11,89 mm (1/4“ FT)Fluid temp. max. 35 °CWeight 0,37 kg

Food-proof pressure tank membrane made of high-quality EPDM. Suitable for drinking water. Suitable for installation in all booster sets.Volume max. 24 LFluid temerature max. 90 °CThickness 1,8 mm

Conveniently retrofittable to all booster sets and garden pumps. Protects the device from damage caused by insufficient water level.Optical functions and malfunctions indicator.Inlet 33,25 mm (1“ MT)Outlet 30,93 mm (1“ FT)

Complete with food-proof mem-brane, flange and vessel valve.

Volume 24 LConnection port 26,44 mm / (3/4“ MT)Weight 4,4 kg

Its simple installation allows you to automate any kind of pres-sure pump delivering more than 1.5 bar. Protects from damage caused by dry-running. The pump will cut in automatically as soon as the minimum pressure is reached. After shutting the consumer, auto-mated cutting out will occur as a function of performance.Comes with a pressure gauge and double nipple.Inlet 33,25 mm (1“ MT) or30,93 mm (1“ FT)Outlet 33,25 mm (1“ MT)Cut-in pressure 1,0 - 3,5 barOperating overpressure max. 10 barConnection port 33,25 mm (1” MT)Fluid temperature max. 55 °C

Complete with food-proof mem-brane, flange and vessel valve.

Volume 24 LConnection port 26,44 mm / (3/4“ MT)Weight 4,0 kg

Flexible, rust-free connection hose. Simple, fast installation.Perfectly suited for connecting water pipe and pump, heating boiler or pressure tanks. For wa-ter distribution in heating and air-conditioning installations. Suitable for drinking water. Food-proof.Includes gaskets.

Operating temperaturemin. / max. - 5 °C / + 100 °COperating pressure max. 10 barConnection port30,93 mm (1” FT) /33,25 mm (1” MT)

This vibration dampener set is intended for units such as booster sets, automatic booster sets or garden pumps. Their use clearly reduces the transmission of noise. Owing to the use of high-quality material in their pro-duction (rubber), abrasion, scrat-ching or skidding is excluded. The required fastening material comes with the set.

;Item number 31002

Item number 31003

Item number 30905

Item number 30915

Item number 30995

Item number 30241

Item number 30996

Item number 30903

Item number 30943

Pressure gaugePressure switch

Membranefor all booster sets

Anti dry-running featureTLS100E

Pressure tankSteel

Elektronic control systemBrio 2000-M

Pressure tankHigh-grade steel

Armoured hose60 cm

VibrationdampenerVD4

;


34

www.tip-pumpen.de

Accessories

SW connection bent39,59 mm (1 ¼“ FT)hose connection 32 mm

Multi-dimensional connection piece41,91 mm (1“ MT) 26,44 mm (¾“ MT)Hose connection28 mm + 34 mm

Double nipple47,80 mm (1½“ MT) 47,80 mm (1½“ MT)

Double nipple33,25 mm (1“ MT) 33,25 mm (1“ MT)

Multi-dimensional connection piece30,93 mm (1“ FT) 26,44 mm (¾“ MT)Hose connection28 mm + 34 mm

Reducing nipple47,80 mm (1½“ MT) 41,91 mm (1¼“ MT)

Multi-dimensional connection bent39,59 mm (1 ¼“ FT) 26,44 mm (¾“ MT)Hose connection28 mm + 34 mm

Check (non-return) valve - plastic39,59 mm (1¼“ FT) 39,59 mm (1¼“ FT)

; SW connection bent45,48 mm (1 ½“ FT)hose connection 38 mm

; Muffle39,59 mm (1¼“ FT)39,59 mm (1¼“ FT)

; Reducer piece45,48 mm (1½“ FT) 41,91 mm (1¼“ MT)

; Double nipple140 mm long33,25 mm (1“ MT) 33,25 mm (1“ MT)

; Connection bent39,59 mm (1 ¼“ FT) 33,25 mm (1“ MT)

; Reducer piece41,91 mm (1¼“ MT) 30,93 mm (1“ FT)

; Foot valve, complete, brass26 mm (1“)

;Item number 30910

;Item number 30945

;Item number 30923

;Item number 30944

;Item number 30917

;Item number 30926

Item number 30908

;Item number 30955

Item number 30909

Item number 30920

Item number 30921

Item number 30942

Item number 30941

Item number 30911

Item number 30924

SW connection bents

Multi-dimensional connection pieceMuffle

Double nippleReducer piece

Double nipple

Multi-dimensional connection pieceConnection bent

Reducing nippleReducer piece

Multi-dimensional connection bent

Check (non-return) valve - plasticFootvalve-brass

;

;

;

;

;

; ;

35


www.tip-pumpen.de

Contact

Design: Angelika Zeck, Diplom-Designerin, [email protected]

© T.I.P. Technische Industrie Produkte GmbH The data given in the catalogue do not represent any warranty of a promised quality. Specifications may vary as a result of technological progress. We assume no liability for typing errors.

Service hotline for technical questions:+49 (0)7263 9125-82+49 (0)7263 9125-83

Monday through Friday from 15.00 to 17.00 o´clock.

Spare parts and repair

Please contact us per e-mail, per fax, on the internet or by post:

E-mail: [email protected] Fax: +49 (0)7263 9125-85

Internet: www.tip-pumpen.de

Post: T.I.P. Technische Industrie Produkte GmbH Abt. Ersatzteile und Reparaturen (Spare pars and repair dept.) Siemensstraße 17 D - 74915 Waibstadt

T.I.P. Technische Industrie Produkte GmbHSiemensstraße 17

D - 74915 Waibstadt

Tel. +49 (0)7263 9125-0

Fax +49 (0)7263 9125-25

[email protected]

www.tip-pumpen.de

www.tip-pumpen.de

Siemensstraße 17 • D - 74915 Waibstadt

Tel. +49 7263 9125-0 • Fax +49 07263 9125-25

www.tip-pumpen.de • [email protected]

The Pump Pros

T.I.P.Pumpen

®

tip pump

Documents