tisi library accession list acoustic testing...

TISI Library Accession List (April-June 2010)

TISI Library Accession List April-June 2010

ACOUSTIC TESTING ISO

ISO 4869-3 2007 Acoustics - Hearing protectors - P. 3: Measurement insertion loss of ear-muff type protectors using an acoustic test fixture /By International Organization for Standardization (ISO). Geneva: ISO, 2007.

ACOUSTICS ISO

ISO 4869-3 2007 Acoustics - Hearing protectors - P. 3: Measurement insertion loss of ear-muff type protectors using an acoustic test fixture /By International Organization for Standardization (ISO). Geneva: ISO, 2007.

ADHESIVES ISO ISO 11339 2010 Adhesives - T-peel test for flexible-to-flexible bonded assemblies /By

International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2010.

AIR ISO ISO 15337 2009 Ambient air - Gas phase titration - Calibration of analyzers for ozone /By

International Organization for Standardization (ISO). Geneva: ISO, 2009.

ARC WELDING AWS AWS C5.5/C5.5M 2003 Recommended practices for gas Tungsten arc welding /By American

Welding Society (AWS) and American National Standards Institute (ANSI). Miami: AWS, 2003.

ISO

ISO 14175 2008 Welding consumables - Gases and gas mixtures for fusion welding and allied processes /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008.


AUDIO EQUIPMENT BSI

BS EN 62087 2009 Methods of measurement for the power consumption of audio, video and related equipment /By British Standards Institution (BSI). London: BSI, 2010.

AUTOMATIC CONTROL SYSTEMS IEC IEC 60730-1 2010 Automatic electrical controls for household and similar use - P. 1: General

requirements /By International Electrotechnical Commission (IEC). 4th ed. Geneva: IEC, 2010.

AUTOMOTIVE FUELS BSI BS EN 15751 2009 Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with

diesel fuel - Determination of oxidation stability by accelerated oxidation method /By British Standards Institution (BSI). London: BSI, 2009.

BAFFLES AWWA ANSI/AWWA F102 2007 Matched-die-molded, fiberglass-reinforced plastic weir plates, scum

baffles, and mounting brackets /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2007.

BEDS IEC IEC 60601-2-52 2009 Medical electrical equipment - P. 2-52: Particular requirements for the

basic safety and essential performance of medical beds /By International Electrotechnical Commission (IEC). Geneva: IEC, 2009.

BIOLOGICAL ANALYSIS AND TESTING ISO

ISO 10993-9 2009 Biological evaluation of medical devices - P. 9: Framework for identification and quantification of potential degradation products /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2009.


ISO 10993-13 2010 Biological evaluation of medical devices - P. 13: Identification and quantification of degradation products from polymeric medical devices /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.

ISO 10993-16 2010 Biological evaluation of medical devices - P. 16: Toxicokinetic study design for degradation products and leachables /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.

BOARD (PAPER) ISO

ISO/TR 25477 2008 Paper, board and pulps - Basic guidelines for image analysis measurements /By International Organization for Standardization (ISO). Geneva: ISO, 2008.

BRACKETS AWWA

ANSI/AWWA F102 2007 Matched-die-molded, fiberglass-reinforced plastic weir plates, scum baffles, and mounting brackets /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2007.

BRAKING SYSTEMS ISO

ISO 4926 2006 Road vehicles - Hydraulic braking systems - Non-petroleum-base reference fluids /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.

BUILDINGS BSI

BS 7543 2003 Guide to durability of buildings and building elements, products and components /By British Standards Institution (BSI). London: BSI, 2003.

ISO

ISO 15392 2008 Sustainability in building construction - General principles /By International Organization for Standardization (ISO). Geneva: ISO, 2008.


BUOYANCY AIDS

BSI

BS EN 13138-1 2008 Buoyant aids for swimming instruction - P. 1: Safety requirements and test methods for buoyant aids to be worn /By British Standards Institution (BSI). London: BSI, 2008.

BS EN 13138-2 2007 Buoyant aids for swimming instruction - P. 2: Safety requirements and test methods for buoyant aids to be held /By British Standards Institution (BSI). London: BSI, 2007.

BS EN 13138-3 2007 Buoyant aids for swimming instruction - P. 3: Safety requirements and test methods for swim seats to be worn /By British Standards Institution (BSI). London: BSI, 2007.

CAFFEINE

ISO

ISO 20481 2008 Coffee and coffee products - Determination of the caffeine content using high performance liquid chromatography (HPLC) - Reference method /By International Organization for Standardization (ISO). Geneva: ISO, 2008.

CASEINS

ISO

ISO 5547 2008 Caseins - Determination of free acidity (Reference method) /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008.

CERAMICS

ISO

ISO 14703 2008 Fine ceramics (advanced ceramics, advanced technical ceramics) - Sample preparation for the determination of particle size distribution of ceramic powders /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008.

ISO 24235 2007 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of particle size distribution of ceramic powders by laser diffraction method /By International Organization for Standardization (ISO). Geneva: ISO, 2007.


CEREAL PRODUCTS ISO

ISO 712 2009 Cereals and cereal products - Determination of moisture content - Reference method /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2009.

CHEMICAL ANALYSIS AND TESTING ISO

ISO 10058-1 2008 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) - P. 1: Apparatus, reagents, dissolution and determination of gravimetric silica /By International Organization for Standardization (ISO). Geneva: ISO, 2008.

ISO 10058-2 2008 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) - P. 2: Wet chemical analysis /By International Organization for Standardization (ISO). Geneva: ISO, 2008.

ISO 10058-3 2008 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) - P. 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) /By International Organization for Standardization (ISO). Geneva: ISO, 2008.

COATINGS - SURFACE DEFECTS ISO

ISO 4628-6 2007 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - P. 6: Assessment of degree of chalking by tape method /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2007.

COAXIAL CABLES IEC IEC/TR 62153-4-1 2010 Metallic communication cable test methods - P. 4-1: Electromagnetic

compatibility (EMC) - Introduction to electromagnetic (EMC) screening measurements /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2010.


CODING (DATA CONVERSION) ISO ISO/IEC 15444-1 2004 Information technology - JPEG 2000 image coding system: Core

coding system /By International Organization for Standardization. 2nd ed. Geneva: ISO, 2004. ISO/IEC 15444-2 2004 Information technology - JPEG 2000 image coding system:

Extensions /By International Organization for Standardization (ISO). Geneva: ISO, 2004. ISO/IEC 15444-3 2007 Information technology - JPEG 2000 image coding system: Motion

JPEG 2000 /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2007. ISO/IEC 15444-8 2007 Information technology - JPEG 2000 image coding system - P. 8:

Secure JPEG 2000 /By International Organization for Standardization (ISO). Geneva: ISO, 2007. ISO/IEC 15444-9 2005 Information technology - JPEG 2000 image coding system:

Interactivity tools, APIs and protocols /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

ISO/IEC 15444-10 2008 Information technology - JPEG 2000 image coding system: Extensions for three-dimensional data /By International Organization for Standardization (ISO). Geneva: ISO, 2008.

ISO/IEC 15444-11 2007 Information technology - JPEG 2000 image coding system: Wireless /By International Organization for Standardization (ISO). Geneva: ISO, 2007.

ISO/IEC 15444-12 2008 Information technology - JPEG 2000 image coding system - P. 12: ISO base media file format /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2008.

COFFEE ISO ISO 20481 2008 Coffee and coffee products - Determination of the caffeine content using

high performance liquid chromatography (HPLC) - Reference method /By International Organization for Standardization (ISO). Geneva: ISO, 2008.

COLOUR FASTNESS ISO

ISO 105-J05 2007 Textiles - Tests for colour fastness - P. J05: Method for the instrumental assessment of the colour inconstancy of a specimen with change in illuminant (CMCCON02) /By International Organization for Standardization (ISO). Geneva: ISO, 2007.


COMMUNICATION CABLES

IEC

IEC 61156-2 2010 Multicore and symmetrical pair/quad cables for digital communications - P. 2: Symmetrical pair/quad cables with transmission characteristics up to 100 MHz - Horizontal floor wiring - Sectional specification /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2010.

COMMUNICATION EQUIPMENT

IEC

IEC 60950-1 2005 Information technology equipment - Safety - P.1: General requirements /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2005.

COMMUNICATION NETWORKS IEC

IEC/TR 61850-90-1 2010 Communication networks and systems for power utility automation - P. 90-1: Use of IEC 61850 for the communication between substations /By International Electrotechnical Commission (IEC). Geneva: IEC, 2010.

COSMETICS ISO

ISO 10130 2009 Cosmetics - Analytical methods - Nitrosamines: Detection and determination of N-nitrosodiethanolamine (NDELA) in cosmetics by HPLC, post-column photolysis and derivatization /By International Organization for Standardization (ISO). Geneva: ISO, 2009.

CUTTING AWS

AWS C5.10/C5.10M 2003 Recommended practices for shielding gases for welding and cutting /By American Welding Society (AWS) and American National Standards Institute (ANSI). Miami: AWS, 2003.


CYLINDRICAL SHAPE ISO ISO 3338-2 2007 Cylindrical shanks for milling cutters - P. 2: Dimensional characteristics of

flatted cylindrical shanks /By International Organization for Standardization (ISO). 6th ed. Geneva: ISO, 2007.

DAIRY PRODUCTS ISO ISO 5547 2008 Caseins - Determination of free acidity (Reference method) /By International

Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008. ISO 6091 2010 Dried milk - Determination of titratable acidity (Reference method) /By

International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.

DATA LAYOUT ISO ISO/IEC 15444-13 2008 Information technology - JPEG 2000 image coding system: An entry

level JPEG 2000 encoder /By International Organization for Standardization (ISO). Geneva: ISO, 2008. ISO/IEC 19794-4 2005 Information technology - Biometric data interchange formats - P. 4:

Finger image data /By International Organization for Standardization (ISO). Geneva: ISO, 2005. ISO/IEC 19794-5 2005 Information technology - Biometric data interchange formats - P. 5:

Face image data /By International Organization for Standardization (ISO). Geneva: ISO, 2005. ISO/IEC 19794-6 2005 Information technology - Biometric data interchange formats - P. 6:

Iris image data /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

DENTAL MATERIALS ISO ISO 9333 2006 Dentistry - Brazing materials /By International Organization for

Standardization (ISO). 2nd ed. Geneva: ISO, 2006.

DENTISTRY ISO

ISO 9333 2006 Dentistry - Brazing materials /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.


DOLOMITE ISO ISO 10058-1 2008 Chemical analysis of magnesite and dolomite refractory products

(alternative to the X-ray fluorescence method) - P. 1: Apparatus, reagents, dissolution and determination of gravimetric silica /By International Organization for Standardization (ISO). Geneva: ISO, 2008.



DRAINPIPES ISO ISO 8773 2006 Plastics piping systems for non-pressure underground drainage and

sewerage - Polypropylene (PP) /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.

DRIED MILK ISO ISO 6091 2010 Dried milk - Determination of titratable acidity (Reference method) /By


DRILLING (MINERAL EXTRACTION) ISO ISO 13500 2008 Petroleum and natural gas industries - Drilling fluid materials - Specifications

and tests /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2008.

DURABILITY BSI BS 7543 2003 Guide to durability of buildings and building elements, products and

components /By British Standards Institution (BSI). London: BSI, 2003.


EARTH-MOVING EQUIPMENT ISO ISO 16001 2008 Earth-moving machinery - Hazard detection systems and visual aids -

Performance requirements and tests /By International Organization for Standardization (ISO). Geneva: ISO, 2008.

ELECTRIC CONNECTORS IEC IEC 60603-7-7 2010 Connectors for electronic equipment - P. 7-7: Detail specification for

8-way, shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2010.

IEC/TR 62652 2010 Effects of engaging and separating under electrical load on connector interfaces in cabling used to support IEEE 802.3af (power-over-ethernet) applications /By International Electrotechnical Commission (IEC). Geneva: IEC, 2010.

ELECTRIC CONTROL EQUIPMENT IEC IEC 60730-1 2010 Automatic electrical controls for household and similar use - P. 1: General

requirements /By International Electrotechnical Commission (IEC). 4th ed. - - Geneva: IEC, 2010. IEC 62271-101 2006 High-voltage switchgear and controlgear - P.101: Synthetic testing /By

International Electrotechnical Commission (IEC). Geneva: IEC, 2006.

ELECTRIC CONVERTORS IEC IEC/TR 60919-1 2010 Performance of high-voltage direct current (HVDC) systems with line-

commutated converters - P. 1: Steady-state conditions /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2010.

IEC 62109-1 2010 Safety of power converters for use in photovoltaic power systems - P. 1: General requirements /By International Electrotechnical Commission (IEC). Geneva: IEC, 2010.

ELECTRIC POWER SYSTEMS IEC IEC/TS 61800-8 2010 Adjustable speed electrical power drive systems - P. 8: Voltage on the

power interface /By International Electrotechnical Commission (IEC). Geneva: IEC, 2010.


ELECTRICAL COMPONENTS IEC

IEC 60068-2-54 2006 Environmental testing - P. 2-54: Tests - Test Ta : Solderability testing of electronic components by the wetting balance method /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2006.

IEC 61190-1-3 2007 Attachment materials for electronic assembly - P.1-3: Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solders for electronic soldering applications /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2007.

ELECTRICAL EQUIPMENT IEC

IEC 60603-7-7 2010 Connectors for electronic equipment - P. 7-7: Detail specification for 8-way, shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2010.

ELECTRICAL HOUSEHOLD APPLIANCES IEC

IEC 60335-1 2010 Household and similar electrical appliances - Safety - P. 1: General requirements /By International Electrotechnical Commission (IEC). 5th ed. Geneva: IEC, 2010.

IEC 60730-1 2010 Automatic electrical controls for household and similar use - P. 1: General requirements /By International Electrotechnical Commission (IEC). 4th ed. Geneva: IEC, 2010.

ELECTRICAL INSTALLATIONS IEC

IEC 60364-4-42 2010 Low-voltage electrical installations - P. 4-42: Protection for safety - Protection against thermal effects /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2010.

IEC 60364-7-702 2010 Low-voltage electrical installations - P. 7-702: Requirements for special installations or locations - Swimming pools and fountains /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2010.


ELECTRICAL MEDICAL EQUIPMENT IEC

IEC 60601-1-11 2010 Medical electrical equipment - P. 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment /By International Electrotechnical Commission (IEC). Geneva: IEC, 2010.

IEC 60601-2-52 2009 Medical electrical equipment - P. 2-52: Particular requirements for the basic safety and essential performance of medical beds /By International Electrotechnical Commission (IEC). Geneva: IEC, 2009.

ELECTRICAL PROTECTION EQUIPMENT IEC

IEC 60364-4-42 2010 Low-voltage electrical installations - P. 4-42: Protection for safety - Protection against thermal effects /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2010.

ELECTRICAL SAFETY IEC

IEC 61508-1 2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - P. 1: General requirements /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2010.

IEC 61508-2 2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - P. 2: Requirements for electrical/electronic/programmable electronic safety-related systems /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2010.

IEC 61508-4 2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - P. 4: Definitions and abbreviations /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2010.

IEC 61508-5 2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - P. 5: Examples of methods for the determination of safety integrity levels /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2010.


ELECTROMAGNETIC COMPATIBILITY (EMC) IEC

IEC 61000-4-18 2006 Electromagnetic compatibility (EMC) - P.4-18: Testing and measurement techniques - Damped oscillatory wave immunity test /By International Electrotechnical Commission (IEC). Geneva: IEC, 2006.

IEC/TR 62153-4-1 2010 Metallic communication cable test methods - P. 4-1: Electromagnetic compatibility (EMC) - Introduction to electromagnetic (EMC) screening measurements /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2010.

ELECTROMAGNETISM IEC

IEC/TR 62153-4-1 2010 Metallic communication cable test methods - P. 4-1: Electromagnetic compatibility (EMC) - Introduction to electromagnetic (EMC) screening measurements /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2010.

ELECTRON-BEAM WELDING AWS

AWS C7.1M/C7.1 2004 Recommended practices for electron beam welding /By American Welding Society (AWS) and American National Standards Institute (ANSI). Miami: AWS, 2004.

ELECTRON BEAMS AWS


ELECTRONIC EQUIPMENT AND COMPONENTS IEC

IEC 60603-7-7 2010 Connectors for electronic equipment - P. 7-7: Detail specification for 8-way, shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2010.


ENVIRONMENTAL TESTING IEC

IEC 60068-2-5 2010 Environmental testing - P. 2-5: Tests - Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2010.

IEC 60068-2-53 2010 Environmental testing - P. 2-53: Tests and guidance - Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2010.

IEC 60068-2-54 2006 Environmental testing - P. 2-54: Tests - Test Ta : Solderability testing of electronic components by the wetting balance method /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2006.

ERGONOMICS ISO

ISO/TS 14505-1 2007 Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles - P. 1: Principles and methods for assessment of thermal stress /By International Organization for Standardization (ISO). Geneva: ISO, 2007.

ERGONOMICS ANTHROPOMETRIC CHARACTERISTICS ISO

ISO 7250-1 2008 Basic human body measurements for technological design - P. 1: Body measurement definitions and landmarks /By International Organization for Standardization (ISO). Geneva: ISO, 2008.

EXTRACTION METHODS OF ANALYSIS ISO

ISO 1407 2009 Rubber - Determination of solvent extract /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2009.


EXTRACTION (MINERALS) ISO ISO/TS 29001 2010 Petroleum, petrochemical and natural gas industries - Sector-specific

quality management systems - Requirements for product and service supply organizations /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2010.

FIBRE OPTIC CONNECTORS IEC IEC 60875-1 2010 Fibre optic interconnecting devices and passive components - Non-

wavelength-selective fibre optic branching devices - P. 1: Generic specification /By International Electrotechnical Commission (IEC). 5th ed. Geneva: IEC, 2010.

IEC 61300-2-24 2010 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - P. 2-24: Tests - Screen testing of ceramic alignment split sleeve by stress application /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2010.

IEC 61753-121-2 2010 Fibre optic interconnecting devices and passive components - Performance standard - P. 121-2: Simplex and duplex cords with single-mode fibre and cylindrical ferrule connectors for category C - Controlled environment /By International Electrotechnical Commission (IEC). Geneva: IEC, 2010.

IEC 61753-121-3 2010 Fibre optic interconnecting devices and passive components - Performance standard - P. 121-3: Simplex and duplex cords with single-mode fibre and cylindrical ferrule connectors for category U - Uncontrolled environment /By International Electrotechnical Commission (IEC). Geneva: IEC, 2010.

IEC 61977 2010 Fibre optic interconnecting devices and passive components - Fibre optic filters - Generic specification /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2010.

FIBRE OPTICS IEC IEC 62149-4 2010 Fibre optic active components and devices - Performance standards -

P. 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2010.


IEC 62343-3-1 2010 Dynamic modules - P. 3-1: Performance specification templates - Dynamic channel equalizers /By International Electrotechnical Commission (IEC). Geneva: IEC, 2010.

FITS ISO ISO 286-1 2010 Geometrical product specifications (GPS) - ISO code system for tolerances

on linear sizes - P. 1: Basis of tolerances, deviations and fits /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.

ISO 286-2 2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - P. 2: Tables of standard tolerance classes and limit deviations for holes and shafts /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.

FLASH POINT ISO ISO 13736 2008 Determination of flash point - Abel closed-cup method /By International

Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008.

FLEXIBLE PIPES ISO ISO 3994 2007 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for

suction and discharge of aqueous materials - Specification /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2007.

FLOW MEASUREMENT ISO

ISO/TR 15377 2007 Measurement of fluid flow by means of pressure-differential devices - Guidelines for the specification of orifice plates, nozzles and Venturi tubes beyond the scope of ISO 5167 /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2007.

FLUID PRESSURE SAA

AS/NZS 4129 2008 Fittings for polyethylene (PE) pipes for pressure applications /By Standards Australia (SAA). New South Wales: SAA, 2008.


FOOD CONTROL BSI PAS 220 2008 Prerequisite programmes on food safety for food manufacturing /By British

Standards Institution (BSI). London: BSI, 2008. FOOD TECHNOLOGY BSI PAS 220 2008 Prerequisite programmes on food safety for food manufacturing /By British

Standards Institution (BSI). London: BSI, 2008. FOUNTAINS IEC IEC 60364-7-702 2010 Low-voltage electrical installations - P. 7-702: Requirements for

special installations or locations - Swimming pools and fountains /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2010.

FRICTION AWS AWS C6.2/C6.2M 2006 Friction welding of metals /By American Welding Society (AWS) and

American National Standards Institute (ANSI). Miami: AWS, 2006.

FUELS BSI BS EN 15751 2009 Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with

diesel fuel - Determination of oxidation stability by accelerated oxidation method /By British Standards Institution (BSI). London: BSI, 2009.

IEC IEC/TS 62282-1 2010 Fuel cell technologies - P. 1: Terminology /By International

Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2010.

FUNDAMENTAL TOLERANCES ISO ISO 286-1 2010 Geometrical product specifications (GPS) - ISO code system for tolerances

on linear sizes - P. 1: Basis of tolerances, deviations and fits /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.


FURNITURE BSI BS EN 12521 2009 Furniture - Strength, durability and safety - Requirements for domestic

tables /By British Standards Institution (BSI). London: BSI, 2009.

FUSES IEC IEC 60269-3 2010 Low-voltage fuses - P. 3: Supplementary requirements for fuses for use by

unskilled persons (fuses mainly for household and similar applications) - Examples of standardized systems of fuses A to F /By International Electrotechnical Commission (IEC). 4th ed. Geneva: IEC, 2010.

GAS-SHIELDED WELDING AWS AWS C5.10/C5.10M 2003 Recommended practices for shielding gases for welding and

cutting /By American Welding Society (AWS) and American National Standards Institute (ANSI). Miami: AWS, 2003.

GAS WELDING AWS AWS C5.5/C5.5M 2003 Recommended practices for gas Tungsten arc welding /By American

Welding Society (AWS) and American National Standards Institute (ANSI). Miami: AWS, 2003. ISO ISO 14175 2008 Welding consumables - Gases and gas mixtures for fusion welding and

allied processes /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008.

GLASSWARE ISO

ISO 4802-1 2010 Glassware - Hydrolytic resistance of the interior surfaces of glass containers - P. 1: Determination by titration method and classification /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.

ISO 4802-2 2010 Glassware - Hydrolytic resistance of the interior surfaces of glass containers - P. 2: Determination by flame spectrometry and classification /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.


HEALTH SERVICES ISO IEC/TS 13606-4 2009 Health informatics - Electronic health record communication -

P. 4: Security /By International Organization for Standardization (ISO). Geneva: ISO, 2009. ISO/TS 25238 2007 Health informatics - Classification of safety risks from health software

/By International Organization for Standardization (ISO). Geneva: ISO, 2007. ISO 27799 2008 Health informatics - Information security management in health using

ISO/IEC 27002 /By International Organization for Standardization (ISO). Geneva: ISO, 2008.

HELICAL GEARS ISO ISO 6336-1 2006 Calculation of load capacity of spur and helical gears - P. 1: Basic

principles, introduction and general influence factors /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2007.

ISO 6336-2 2006 Calculation of load capacity of spur and helical gears - P. 2: Calculation of surface durability (pitting) /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.

ISO 6336-3 2006 Calculation of load capacity of spur and helical gears - P. 3: Calculation of tooth bending strength /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO; 2007.

ISO 6336-6 2006 Calculation of load capacity of spur and helical gears - P. 6: Calculation of service life under variable load /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

HOSPITAL EQUIPMENT IEC


HYGIENE BSI

PAS 220 2008 Prerequisite programmes on food safety for food manufacturing /By British Standards Institution (BSI). London: BSI, 2008.


INFORMATION ISO

IEC/TS 13606-4 2009 Health informatics - Electronic health record communication - P. 4: Security /By International Organization for Standardization (ISO). Geneva: ISO, 2009.

ISO/TS 25238 2007 Health informatics - Classification of safety risks from health software /By International Organization for Standardization (ISO). Geneva: ISO, 2007.

INFORMATION SECURITY MANAGEMENT ISO

ISO/IEC 27005 2008 Information technology - Security techniques - Information security risk management /By International Organization for Standardization (ISO). Geneva: ISO, 2008.

ISO 27799 2008 Health informatics - Information security management in health using ISO/IEC 27002 /By International Organization for Standardization (ISO). Geneva: ISO, 2008.

INFORMATION SYSTEMS IEC

IEC 82045-1 2001 Document management - P. 1: Principles and methods /By International Electrotechnical Commission (IEC). Geneva: IEC, 2001.

ISO

ISO 82045-5 2005 Document management - P. 5: Application of metadata for the construction and facility management sector /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

INFORMATION TECHNOLOGY ISO


ISO/IEC TR 29163-1 2009 Information technology - Sharable Content Object Reference Model (SCORM®) 2004 3rd Edition - P. 1: Overview Version 1.1 /By International Organization for Standardization (ISO). Geneva: ISO, 2009.


ISO/IEC 12785-1 2009 Information technology - Learning, education, and training - Content packaging - P. 1: Information model /By International Organization for Standardization (ISO). Geneva: ISO, 2009.

ISO/IEC 15444-1 2004 Information technology - JPEG 2000 image coding system: Core coding system /By International Organization for Standardization. 2nd ed. Geneva: ISO, 2004.

ISO/IEC 15444-2 2004 Information technology - JPEG 2000 image coding system: Extensions /By International Organization for Standardization (ISO). Geneva: ISO, 2004.

ISO/IEC 15444-3 2007 Information technology - JPEG 2000 image coding system: Motion JPEG 2000 /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2007.

ISO/IEC 15444-9 2005 Information technology - JPEG 2000 image coding system: Interactivity tools, APIs and protocols /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

ISO/IEC 15444-8 2007 Information technology - JPEG 2000 image coding system - P. 8: Secure JPEG 2000 /By International Organization for Standardization (ISO). Geneva: ISO, 2007.

ISO/IEC 15444-10 2008 Information technology - JPEG 2000 image coding system: Extensions for three-dimensional data /By International Organization for Standardization (ISO). Geneva: ISO, 2008.

ISO/IEC 15444-11 2007 Information technology - JPEG 2000 image coding system: Wireless /By International Organization for Standardization (ISO). Geneva: ISO, 2007.

ISO/IEC 15444-12 2008 Information technology - JPEG 2000 image coding system - P. 12: ISO base media file format /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2008.

ISO/IEC 15444-13 2008 Information technology - JPEG 2000 image coding system: An entry level JPEG 2000 encoder /By International Organization for Standardization (ISO). Geneva: ISO, 2008.

ISO/IEC 18033-2 2006 Information technology - Security techniques - Encryption algorithms - P. 2: Asymmetric ciphers /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

ISO/IEC 18033-3 2005 Information technology - Security techniques - Encryption algorithms - P. 3: Block ciphers /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

ISO/IEC 19794-4 2005 Information technology - Biometric data interchange formats - P. 4: Finger image data /By International Organization for Standardization (ISO). Geneva: ISO, 2005.


ISO/IEC 19794-5 2005 Information technology - Biometric data interchange formats - P. 5: Face image data /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

ISO/IEC 19794-6 2005 Information technology - Biometric data interchange formats - P. 6: Iris image data /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

ISO/IEC 27005 2008 Information technology - Security techniques - Information security risk management /By International Organization for Standardization (ISO). Geneva: ISO, 2008.

INSULATING OILS IEC

IEC 60666 2010 Detection and determination of specified additives in mineral insulating oils /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2010.

INTEGRATED CIRCUITS IEC IEC/TR 61967-1-1 2010 Integrated circuits - Measurement of electromagnetic emissions -

P. 1-1: General conditions and definitions - Near-field scan data exchange format /By International Electrotechnical Commission (IEC). Geneva: IEC, 2010.

INTERNAL COMBUSTION ENGINES ISO ISO 3046-3 2006 Reciprocating internal combustion engines - Performance - P. 3: Test

measurements /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2006. ISO 4548-9 2008 Methods of test for full-flow lubricating oil filters for internal combustion

engines - P. 9: Inlet and outlet anti-drain valve tests /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008.

IRON ORES ISO ISO 4696-1 2007 Iron ores for blast furnace feedstocks - Determination of low-temperature

reduction-disintegration indices by static method - P. 1: Reduction with CO, Co2, H2 and N2 /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2007.


ISO 4696-2 2007 Iron ores for blast furnace feedstocks - Determination of low-temperature reduction-disintegration indices by static method - P. 1: Reduction with CO and N2 /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2007.

LABORATORY GLASSWARE ISO ISO 4787 2010 Laboratory glassware - Volumetric instruments - Methods for testing of

capacity and for use /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.

LAMPS BSI BS EN 62471 2008 Photobiological safety of lamps and lamp systems /By British Standards

Institution (BSI). London: BSI, 2009.

LATICES ISO ISO 2006-1 2009 Rubber latex, synthetic - Determination of mechanical stability - P. 1: High-

speed method /By International Organization for Standardization (ISO). Geneva: ISO, 2009. ISO 2006-2 2009 Rubber latex, synthetic - Determination of mechanical stability - P. 2:

Moderate-speed method under load /By International Organization for Standardization (ISO). Geneva: ISO, 2009.

LIBRARY AND INFORMATION SCIENCE ISO

ISO 9230 2007 Information and documentation - Determination of price indexes for print and electronic media purchased by libraries /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2007.

LIGHT BSI

BS EN 13032-2 2004 Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - P. 2: Presentation of data for indoor and outdoor work places /By British Standards Institution (BSI). London: BSI, 2007.


LIGHTING SYSTEMS BSI

BS EN 13032-2 2004 Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - P. 2: Presentation of data for indoor and outdoor work places /By British Standards Institution (BSI). London: BSI, 2007.

LOAD CAPACITY ISO ISO 6336-1 2006 Calculation of load capacity of spur and helical gears - P. 1: Basic

principles, introduction and general influence factors /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2007.




LOW-VOLTAGE EQUIPMENT IEC

IEC 60269-3 2010 Low-voltage fuses - P. 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) - Examples of standardized systems of fuses A to F /By International Electrotechnical Commission (IEC). 4th ed. Geneva: IEC, 2010.

MAGNESITE ISO





MANAGEMENT OPERATIONS AWWA

ANSI/AWWA G410 2009 Business practices for operation and management /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2009.

ANSI/AWWA G430 2009 Security practices for operation and management /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2009.

MANAGEMENT SYSTEM AWWA

AWWA G400 2009 Utility management system /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2009.

MANAGEMENT TECHNIQUES AWWA AWWA G400 2009 Utility management system /By American Water Works Association

(AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2009. ANSI/AWWA G410 2009 Business practices for operation and management /By American

Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2009.



MARINE SAFETY BSI

BS EN 13138-1 2008 Buoyant aids for swimming instruction - P. 1: Safety requirements and test methods for buoyant aids to be worn /By British Standards Institution (BSI). London: BSI, 2008.

BS EN 13138-2 2007 Buoyant aids for swimming instruction - P. 2: Safety requirements and test methods for buoyant aids to be held /By British Standards Institution (BSI). London: BSI, 2007.

BS EN 13138-3 2007 Buoyant aids for swimming instruction - P. 3: Safety requirements and test methods for swim seats to be worn /By British Standards Institution (BSI). London: BSI, 2007.

MECHANICAL TESTING AWS

ANSI/AWS B4.0 2007 Methods for mechanical testing of welds /By American Welding Society (AWS) and American National Standards Institute (ANSI). Miami: AWS, 2007.

MEDICAL EQUIPMENT IEC

IEC 60601-1-11 2010 Medical electrical equipment - P. 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment /By International Electrotechnical Commission (IEC). Geneva: IEC, 2010.


ISO

ISO 10993-9 2009 Biological evaluation of medical devices - P. 9: Framework for identification and quantification of potential degradation products /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2009.

ISO 10993-13 2010 Biological evaluation of medical devices - P. 13: Identification and quantification of degradation products from polymeric medical devices /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.


ISO 10993-16 2010 Biological evaluation of medical devices - P. 16: Toxicokinetic study design for degradation products and leachables /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.

MILK ISO ISO 488 2008 Milk - Determination of fat content - Gerber butyrometers /By International

Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008. ISO 1211 2010 Milk - Determination of fat content - Gravimetric method (Reference method)

/By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2010. ISO 5764 2009 Milk - Determination of freezing point - Thermistor cryoscope method

(Reference method) /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2009. ISO 6091 2010 Dried milk - Determination of titratable acidity (Reference method) /By


ISO 8196-1 2009 Milk - Definition and evaluation of the overall accuracy of alternative methods of milk analysis - P. 1: Analytical attributes of alternative methods /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2009.

ISO 11870 2009 Milk and milk products - Determination of fat content - General guidance on the use of butyrometric methods /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2009.

ISO 17678 2010 Milk and milk products - Determination of milk fat purity by gad chromatographic analysis of triglycerides (Reference method) /By International Organization for Standardization (ISO). Geneva: ISO, 2010.

ISO 26462 2010 Milk - Determination of lactose content - Enzymatic method using difference in pH /By International Organization for Standardization (ISO). Geneva: ISO, 2010.

MILK PRODUCTS ISO

ISO 11870 2009 Milk and milk products - Determination of fat content - General guidance on the use of butyrometric methods /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2009.


ISO 17678 2010 Milk and milk products - Determination of milk fat purity by gad chromatographic analysis of triglycerides (Reference method) /By International Organization for Standardization (ISO). Geneva: ISO, 2010.

MILLING CUTTERS ISO

ISO 3338-2 2007 Cylindrical shanks for milling cutters - P. 2: Dimensional characteristics of flatted cylindrical shanks /By International Organization for Standardization (ISO). 6th ed. Geneva: ISO, 2007.

MOISTURE MEASUREMENT ISO

ISO 712 2009 Cereals and cereal products - Determination of moisture content - Reference method /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2009.

MOULDED MATERIALS AWWA


NATURAL GAS ISO

ISO 13500 2008 Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2008.

OIL FILTERS ISO

ISO 4548-9 2008 Methods of test for full-flow lubricating oil filters for internal combustion engines - P. 9: Inlet and outlet anti-drain valve tests /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008.


OZONE ISO

ISO 15337 2009 Ambient air - Gas phase titration - Calibration of analyses for ozone /By International Organization for Standardization (ISO). Geneva: ISO, 2009.

PAINTS ISO

ISO 4628-6 2007 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - P. 6: Assessment of degree of chalking by tape method /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2007.

ISO 11890-2 2006 Paints and varnishes - Determination of volatile organic compound (VOC) content - P. 2: Gas-chromatographic method /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.

PAPER ISO


PAPER PULP ISO


PARTICLE SIZE MEASUREMENT ISO

ISO 13320 2009 Particle size analysis - Laser diffraction methods /By International Organization for Standardization (ISO). Geneva: ISO, 2009.

ISO 22412 2008 Particle size analysis - Dynamic light scattering (DLS) /By International Organization for Standardization (ISO). Geneva: ISO, 2008.


PEELING TESTS ISO

ISO 11339 2010 Adhesives - T-peel test for flexible-to-flexible bonded assemblies /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2010.

PERFORMANCE INDICATORS BSI

BS EN 15341 2007 Maintenance key performance indicators /By British Standards Institution (BSI). London: BSI, 2007.

PETROLEUM ISO

ISO 13500 2008 Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2008.

PETROLEUM PRODUCTS BSI

BS EN 13016-1 2007 Liquid petroleum products - Vapour pressure - P. 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE) /By British Standards Institution (BSI). London: BSI, 2007.

BS EN 13016-2 2007 Liquid petroleum products - Vapour pressure - P. 2: Determination of absolute pressure (AVP) between 40ºC and 100ºC /By British Standards Institution

ISO ISO 13736 2008 Determination of flash point - Abel closed-cup method /By International

Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008.

PHOTOVOLTAIC CELLS IEC

IEC 62109-1 2010 Safety of power converters for use in photovoltaic power systems - P. 1: General requirements /By International Electrotechnical Commission (IEC). Geneva: IEC, 2010.


PIPE FITTINGS SAA

AS/NZS 4129 2008 Fittings for polyethylene (PE) pipes for pressure applications /By Standards Australia (SAA). New South Wales: SAA, 2008.

AS/NZS 5065 2005 Polyethylene and polypropylene pipes and fittings for drainage and sewerage applications /By Standards Australia (SAA). New South Wales: SAA, 2005.

PIPES ISO

ISO 13479 2009 Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2009.

PIPES - PLASTICS SAA

AS/NZS 5065 2005 Polyethylene and polypropylene pipes and fittings for drainage and sewerage applications /By Standards Australia (SAA). New South Wales: SAA, 2005.

PIPEWORK SYSTEMS ISO

ISO 8773 2006 Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.

PLASTICS ISO ISO 4575 2007 Plastics - Poly(vinyl chloride) pastes - Determination of apparent viscosity

using the severs rheometer /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2007.

ISO 6401 2008 Plastics - Poly (vinyl chloride) - Determination of residual vinyl chloride monomer - Gas-chromatographic method /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008.


ISO 11357-1 2009 Plastics - Differential scanning calorimetry (DSC) - P. 1: General principles /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2009.

PLASTICS AND RUBBER TECHNOLOGY ISO

ISO/TR 24699 2009 Rubber and rubber products - Environmental aspects - General guidelines for their inclusion in standards /By International Organization for Standardization (ISO). Geneva: ISO, 2009.

PLASTICS - COLOUR FASTNESS ISO

ISO 4582 2007 Plastics - Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2007.

PLASTICS - ENVIRONMENTAL TESTING ISO

ISO 4582 2007 Plastics - Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2007.

PLATES AWWA


POLYVINYL CHLORIDE ISO ISO 4575 2007 Plastics - Poly(vinyl chloride) pastes - Determination of apparent viscosity

using the severs thermometer /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2007.


ISO 6401 2008 Plastics - Poly (vinyl chloride) - Determination of residual vinyl chloride monomer - Gas-chromatographic method /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008.

POWER MEASUREMENT (ELECTRIC) BSI BS EN 62087 2009 Methods of measurement for the power consumption of audio, video and

related equipment /By British Standards Institution (BSI). London: BSI, 2010.

PRESSURE PIPES SAA AS/NZS 4130 2009 Polyethylene (PE) pipes for pressure applications /By Standards Australia

(SAA). New South Wales: SAA, 2009.

PRINTED-CIRCUIT BOARDS IEC IEC 61249-2-41 2010 Materials for printed boards and other interconnecting structures -

P. 2-41: Reinforced base materials clad and unclad - Brominated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly /By International Electrotechnical Commission (IEC). Geneva: IEC, 2010.

IEC 61249-2-42 2010 Materials for printed boards and other interconnecting structures - P. 2-42: Reinforced base materials clad and unclad - Brominated epoxide non-woven/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly /By International Electrotechnical Commission (IEC). Geneva: IEC, 2010.

QUALIFICATION APPROVAL AWS AWS B5.1 2003 Qualification of welding inspectors /By American Welding Society (AWS) and


QUALITY ASSURANCE ISO ISO/TS 10004 2010 Quality management - Customer satisfaction - Guidelines for monitoring

and measuring /By International Organization for Standardization (ISO). Geneva: ISO, 2010.


QUALITY ASSURANCE SYSTEMS ISO

ISO/TS 29001 2010 Petroleum, petrochemical and natural gas industries - Sector-specific quality management systems - Requirements for product and service supply organizations /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2010.

QUALITY CONTROL ISO

ISO/TS 10004 2010 Quality management - Customer satisfaction - Guidelines for monitoring and measuring /By International Organization for Standardization (ISO). Geneva: ISO, 2010.

QUALITY MANAGEMENT TECHNIQUES ISO ISO/TS 10004 2010 Quality management - Customer satisfaction - Guidelines for monitoring

and measuring /By International Organization for Standardization (ISO). Geneva: ISO, 2010.

RADIATION MEASUREMENT IEC IEC 60068-2-5 2010 Environmental testing - P. 2-5: Tests - Test Sa: Simulated solar radiation

at ground level and guidance for solar radiation testing /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2010.

RADIO DISTURBANCES - MEASUREMENT IEC CISPR 16-2-3 2010 Radio disturbance and immunity measuring apparatus and methods -

P. 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2010.

RAILWAY ENGINEERING IEC IEC/TR 62278-3 2010 Railway applications - Specification and demonstration of reliability,

availability, maintainability and safety (RAMS) - P. 3: Guide to the application of IEC 62278 for rolling stock RAM /By International Electrotechnical Commission (IEC). Geneva: IEC, 2010.


RAILWAY VEHICLES IEC

IEC/TR 62278-3 2010 Railway applications - Specification and demonstration of reliability, availability, maintainability and safety (RAMS) - P. 3: Guide to the application of IEC 62278 for rolling stock RAM /By International Electrotechnical Commission (IEC). Geneva: IEC, 2010.

REFRACTORY MATERIALS ISO




REINFORCED PLASTICS AWWA


ROAD VEHICLES ISO

ISO 4926 2006 Road vehicles - Hydraulic braking systems - Non-petroleum-base reference fluids /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.


ROLLERS - VULCANIZED RUBBER ISO

ISO 7267-1 2008 Rubber-covered rollers - Determination of apparent hardness - P. 1: IRHD method /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2008.

ISO 7267-2 2008 Rubber-covered rollers - Determination of apparent hardness - P. 2: Shore-type durometer method /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008.

ISO 7267-3 2007 Rubber-covered rollers - Determination of apparent hardness - P. 3: Pusey and Jones method /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2007.

ROTATING ELECTRICAL MACHINES IEC

IEC/TS 60034-31 2010 Rotating electrical machines - P. 31: Selection of energy-efficient motors including variable speed applications - Application guide /By International Electrotechnical Commission (IEC). Geneva: IEC, 2010.

RUBBER ISO ISO 2006-1 2009 Rubber latex, synthetic - Determination of mechanical stability - P. 1: High-



SAFETY MEASURES IEC

IEC 60950-1 2005 Information technology equipment - Safety - P.1: General requirements /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2005.

SAFETY REQUIREMENTS IEC

IEC 60335-1 2010 Household and similar electrical appliances - Safety - P. 1: General requirements /By International Electrotechnical Commission (IEC). 5th ed. Geneva: IEC, 2010.


SATURATED VAPOUR PRESSURE BSI

BS EN 13016-1 2007 Liquid petroleum products - Vapour pressure - P. 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE) /By British Standards Institution (BSI). London: BSI, 2007.

SCORM ISO

ISO/IEC TR 29163-1 2009 Information technology - Sharable Content Object Reference Model (SCORM®) 2004 3rd Edition - P. 1: Overview Version 1.1 /By International Organization for Standardization (ISO). Geneva: ISO, 2009.

SECTIONS (STRUCTURES) BSI

BS EN 10088-3 2005 Stainless steels - P. 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes /By British Standards Institution (BSI). London: BSI, 2005.

SECURITIES - MANAGEMENT AWWA


SECURITY TECHNIQUES ISO ISO/IEC 18033-2 2006 Information technology - Security techniques - Encryption algorithms -

P. 2: Asymmetric ciphers /By International Organization for Standardization (ISO). Geneva: ISO, 2006. ISO/IEC 18033-3 2005 Information technology - Security techniques - Encryption algorithms -

P. 3: Block ciphers /By International Organization for Standardization (ISO). Geneva: ISO, 2005. ISO/IEC 27005 2008 Information technology - Security techniques - Information security risk

management /By International Organization for Standardization (ISO). Geneva: ISO, 2008.



SEMICONDUCTOR DEVICES IEC IEC 60747-1 2006 Semiconductor devices - P. 1: General /By International Electrotechnical

Commission (IEC). 2nd ed. Geneva: IEC, 2006. IEC 62415 2010 Semiconductor devices - Constant current electromigration test /By

International Electrotechnical Commission (IEC). Geneva: IEC, 2010. IEC 62416 2010 Semiconductor devices - Hot carrier test on MOS transistors /By

International Electrotechnical Commission (IEC). Geneva: IEC, 2010. IEC 62417 2010 Semiconductor devices - Mobile ion tests for metal-oxide semiconductor field

effect transistors (MOSFETs) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2010. IEC 62418 2010 Semiconductor devices - Metallization stress void test /By International

Electrotechnical Commission (IEC). Geneva: IEC, 2010.

SEWERS ISO ISO 8773 2006 Plastics piping systems for non-pressure underground drainage and

sewerage - Polypropylene (PP) /By International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2006.

SHIELDED WELDING AWS


SHOWERS SAA

AS/NZS 3662 2005 Performance of showers for bathing /By Standards Australia (SAA). New South Wales: SAA, 2010.


SOLDERS IEC

IEC 61190-1-3 2007 Attachment materials for electronic assembly - P.1-3: Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solders for electronic soldering applications /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2007.

SPORTS EQUIPMENT BSI

BS EN 957-2 2003 Stationary training equipment - P. 2: Strength training equipment, additional specific safety requirements and test methods /By British Standards Institution (BSI). London: BSI, 2003.

SPUR GEARS ISO

ISO 6336-1 2006 Calculation of load capacity of spur and helical gears - P. 1: Basic principles, introduction and general influence factors /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2007.




STAINLESS STEELS BSI BS EN 10088-2 2005 Stainless steels - P. 2: Technical delivery conditions for sheet/plate and

strip of corrosion resisting steels for general purposes /By British Standards Institution (BSI). London: BSI, 2005.


BS EN 10088-3 2005 Stainless steels - P. 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes /By British Standards Institution (BSI). London: BSI, 2005.

STANDARD TOLERANCES ISO ISO 286-2 2010 Geometrical product specifications (GPS) - ISO code system for tolerances

on linear sizes - P. 2: Tables of standard tolerance classes and limit deviations for holes and shafts /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.

STEELS - SURFACE TREATMENT ISO ISO 8502-6 2006 Preparation of steel substrates before application of paints and related

products - Tests for the assessment of surface cleanliness - P. 6: Extraction of soluble contaminants for analysis - The Bresle method /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.

STRIPS BSI BS EN 10088-2 2005 Stainless steels - P. 2: Technical delivery conditions for sheet/plate and

strip of corrosion resisting steels for general purposes /By British Standards Institution (BSI). London: BSI, 2005.

SURFACES - PREPARATION ISO ISO 8502-6 2006 Preparation of steel substrates before application of paints and related

products - Tests for the assessment of surface cleanliness - P. 6: Extraction of soluble contaminants for analysis - The Bresle method /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.

SWIMMING POOLS IEC IEC 60364-7-702 2010 Low-voltage electrical installations - P. 7-702: Requirements for

special installations or locations - Swimming pools and fountains /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2010.


SWITCHGEAR IEC

IEC 62271-101 2006 High-voltage switchgear and controlgear - P.101: Synthetic testing /By International Electrotechnical Commission (IEC). Geneva: IEC, 2006.

SYNTHETIC RUBBER ISO ISO 1407 2009 Rubber - Determination of solvent extract /By International Organization for

Standardization (ISO). 3rd ed. Geneva: ISO, 2009. ISO 2006-1 2009 Rubber latex, synthetic - Determination of mechanical stability - P. 1: High-



TABLES BSI

BS EN 12521 2009 Furniture - Strength, durability and safety - Requirements for domestic tables /By British Standards Institution (BSI). London: BSI, 2009.

TELEPHONE EQUIPMENT IEC

IEC 62209-2 2010 Human exposure to radio frequency fields form hand-held and body-mounted wireless communication devices - Human models, instrumentation, and procedures - P. 2: Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2010.

TERMINOLOGY IEC

IEC/TS 62282-1 2010 Fuel cell technologies - P. 1: Terminology /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2010.


TESTING ISO

ISO 105-J05 2007 Textiles - Tests for colour fastness - P. J05: Method for the insutrumental assessment of the colour inconstancy of a specimen with change in illuminant (CMCCON02) /By International Organization for Standardization (ISO). Geneva: ISO, 2007.

ISO 4548-9 2008 Methods of test for full-flow lubricating oil filters for internal combustion engines - P. 9: Inlet and outlet anti-drain valve tests /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008.

TEXTILES ISO

ISO 105-J05 2007 Textiles - Tests for colour fastness - P. J05: Method for the instrumental assessment of the colour inconstancy of a specimen with change in illuminant (CMCCON02) /By International Organization for Standardization (ISO). Geneva: ISO, 2007.

THERMAL ENVIRONMENT SYSTEMS ISO ISO/TS 14505-1 2007 Ergonomics of the thermal environment - Evaluation of thermal

environments in vehicles - P. 1: Principles and methods for assessment of thermal stress /By International Organization for Standardization (ISO). Geneva: ISO, 2007.

THERMAL TESTING IEC

IEC/TS 60034-31 2010 Rotating electrical machines - P. 31: Selection of energy-efficient motors including variable speed applications - Application guide /By International Electrotechnical Commission (IEC). Geneva: IEC, 2010.

THERMOPLASTIC POLYMERS ISO

ISO 3994 2007 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2007.


TOOL SHANKS ISO

ISO 3338-2 2007 Cylindrical shanks for milling cutters - P. 2: Dimensional characteristics of flatted cylindrical shanks /By International Organization for Standardization (ISO). 6th ed. Geneva: ISO, 2007.

TRANSPORTATION ISO

ISO 22837 2009 Vehicle probe data for wide area communications /By International Organization for Standardization (ISO). Geneva: ISO, 2009.

TUNGSTEN AWS

AWS C5.5/C5.5M 2003 Recommended practices for gas Tungsten arc welding /By American Welding Society (AWS) and American National Standards Institute (ANSI). Miami: AWS, 2003.

VALVES BSI BS EN 13175 2003 Specification and testing for Liquefied Petroleum Gas (LPG) tank valves

and fittings /By British Standards Institution (BSI). London: BSI, 2003.

ISO ISO 5208 2008 Industrial valves - Pressure testing of metallic valves /By International

Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2008.

VAPOUR PRESSURE BSI BS EN 13016-1 2007 Liquid petroleum products - Vapour pressure - P. 1: Determination of

air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE) /By British Standards Institution (BSI). London: BSI, 2007.

BS EN 13016-2 2007 Liquid petroleum products - Vapour pressure - P. 2: Determination of absolute pressure (AVP) between 40ºC and 100ºC /By British Standards Institution (BSI). London: BSI, 2007.


VARNISHES ISO

ISO 11890-2 2006 Paints and varnishes - Determination of volatile organic compound (VOC) content - P. 2: Gas-chromatographic method /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.

ISO 4628-6 2007 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - P. 6: Assessment of degree of chalking by tape method /By International Organization for Standardization (ISO). 2nd ed Geneva: ISO, 2007.

VEHICLES ISO

ISO 22837 2009 Vehicle probe data for wide area communications /By International Organization for Standardization (ISO). Geneva: ISO, 2009.

VIBRATION TESTING IEC

IEC 60068-2-53 2010 Environmental testing - P. 2-53: Tests and guidance - Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2010.

VIDEO RECORDING BSI

BS EN 62087 2009 Methods of measurement for the power consumption of audio, video and related equipment /By British Standards Institution (BSI). London: BSI, 2010.

VISCOSITY ISO

ISO 4575 2007 Plastics - Poly(vinyl chloride) pastes - Determination of apparent viscosity using the severs rheometer /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2007.


VOLATILE MATTER DETERMINATION ISO ISO 11890-2 2006 Paints and varnishes - Determination of volatile organic compound (VOC)

content - P. 2: Gas-chromatographic method /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.

WATER ISO ISO/TR 11044 2008 Water quality - Scientific and technical aspects of batch algae growth

inhibition tests /By International Organization for Standardization (ISO). Geneva: ISO, 2008.

WATER - QUALITY AWWA ANSI/AWWA G300 2007 Source water protection /By American Water Works Association

(AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2007. ISO ISO/TR 11044 2008 Water quality - Scientific and technical aspects of batch algae growth

inhibition tests /By International Organization for Standardization (ISO). Geneva: ISO, 2008.

WEIRS AWWA ANSI/AWWA F102 2007 Matched-die-molded, fiberglass-reinforced plastic weir plates,

scum baffles, and mounting brackets /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2007.

WELD METAL AWS AWS C6.2/C6.2M 2006 Friction welding of metals /By American Welding Society (AWS) and


WELDERS AWS AWS B5.4 2005 Qualification of welder test facilities /By American Welding Society (AWS)

and American National Standards Institute (ANSI). Miami: AWS, 2005.


WELDING AWS

AWS B5.1 2003 Qualification of welding inspectors /By American Welding Society (AWS) and American National Standards Institute (ANSI). Miami: AWS, 2003.

AWS B5.9 2006 Qualification of welding supervisors /By American Welding Society (AWS) and American National Standards Institute (ANSI). Miami: AWS, 2006.

AWS B5.14 2009 Qualification of welding sales representatives /By American Welding Society (AWS) and American National Standards Institute (ANSI). Miami: AWS, 2009.

AWS C6.2/C6.2M 2006 Friction welding of metals /By American Welding Society (AWS) and American National Standards Institute (ANSI). Miami: AWS, 2006.


WELDING EQUIPMENT AWS


WELDING - QUALIFICATION APPROVAL AWS

AWS B5.1 2003 Qualification of welding inspectors /By American Welding Society (AWS) and American National Standards Institute (ANSI). Miami: AWS, 2003.

WELDS JOINTS AWS

ANSI/AWS B4.0 2007 Methods for mechanical testing of welds /By American Welding Society (AWS) and American National Standards Institute (ANSI). Miami: AWS, 2007.


0123415678

9:;95<=1 !". 2067 2552 GHIGJKLMNLMOPQRSTPUVIWNXYZQ[\] S^_MàbMJNcVWdeafbIg: GMPhPÒiQaJKLM

913>3?@13AB10CDEF8G !". 22301 2553 P`RRGMPRPcOMPTeMgjkISJUVIWlMWmXPGcn - YbIGLMOJa

913H?7I9JKD?FGLBMNO;0 !". 2066 2552 opGRQeIMRJKLM S^_MàbMJNcVWdeafbIg: GMPhPÒiQaJKLM

!". 2067 2552 GHIGJKLMNLMOPQRSTPUVIWNXYZQ[\] S^_MàbMJNcVWdeafbIg: GMPhPÒiQaJKLM

913;5P3I9JKHNIGG15 !". 2066 2552 opGRQeIMRJKLM S^_MàbMJNcVWdeafbIg: GMPhPÒiQaJKLM


AB10QN;MRI8 !". 2320 2552 PqiJj]YJMarOskltVrubSTPUVIWiJj]dRRnXaP`SRca abeihP`GMivwltVrubGxMymPPguMjc

OPUI GxMyhz{jPSftigSOfeSh|JSuUKIS_fcW S^_MàbMJTeMghfIaZQi: NMPgf_c}nMGSTPUVIWiJj] PàQRltV 1

A;593E2 !". 213 2552 TIJGPtj~NgSNPHn

CA3SF;GTI939N !". 1501 2552 SOfHGGfbMTMP]RIJlPWdRJPtaPbIJ NLMOPQRWMJ{TPWNPbMWSTPUVIWnQGPGf

CA3SF;GDPURIVWK - ;PQ93VK !". 2066 2552 opGRQeIMRJKLM S^_MàbMJNcVWdeafbIg: GMPhPÒiQaJKLM


XY9>IB !". 2066 2552 opGRQeIMRJKLM S^_MàbMJNcVWdeafbIg: GMPhPÒiQaJKLM


8?QZI0 !". 219 2552 d~kJichyQg

3[852K !". 2320 2552 PqiJj]YJMarOskltVrubSTPUVIWiJj]dRRnXaP`SRca abeihP`GMivwltVrubGxMymPPguMjc


3[852K - \?<5D]B5 !". 2320 2552 PqiJj]YJMarOskltVrubSTPUVIWiJj]dRRnXaP`SRca abeihP`GMivwltVrubGxMymPPguMjc


3^>>>3?@13AB102];C5SF;G71G_P39?T !". 22301 2553 P`RRGMPRPcOMPTeMgjkISJUVIWlMWmXPGcn - YbIGLMOJa

BIDMPLN^;PQ93VK9];D3O1G !". 213 2552 TIJGPtj~NgSNPHn

!". 219 2552 d~kJichyQg

D130NH?J - 3[852K !". 2320 2552 PqiJj]YJMarOskltVrubSTPUVIWiJj]dRRnXaP`SRca abeihP`GMivwltVrubGxMymPPguMjc


D?FGLBMNO;0 !". 2066 2552 opGRQeIMRJKLM S^_MàbMJNcVWdeafbIg: GMPhPÒiQaJKLM


@O;G5<=1 - ;PQ93VK !". 2066 2552 opGRQeIMRJKLM S^_MàbMJNcVWdeafbIg: GMPhPÒiQaJKLM

C@N`99NO1 !". 1501 2552 SOfHGGfbMTMP]RIJlPWdRJPtaPbIJ NLMOPQRWMJ{TPWNPbMWSTPUVIWnQGPGf

C@N`9La]5 !". 1501 2552 SOfHGGfbMTMP]RIJlPWdRJPtaPbIJ NLMOPQRWMJ{TPWNPbMWSTPUVIWnQGPGf


Alphabetical Subject Index

Subject Index Page

Acoustic testing 1 Acoustics 1 Adhesives 1 Air 1 Arc welding 1 Audio equipment 2 Automatic control systems 2 Automotive fuels 2 Baffles 2 Beds 2 Biological analysis and testing 2 Board (paper) 3 Brackets 3 Braking systems 3 Buildings 3 Buoyancy aids 4 Caffeine 4 Caseins 4 Ceramics 4 Cereal products 5 Chemical analysis and testing 5 Coatings - Surface defects 5 Coaxial cables 5 Coding (data conversion) 6 Coffee 6 Colour fastness 6 Communication cables 7 Communication equipment 7


Subject Index Page

Communication networks 7 Cosmetics 7 Cutting 7 Cylindrical shape 8 Dairy products 8 Data layout 8 Dental materials 8 Dentistry 8 Dolomite 9 Drainpipes 9 Dried milk 9 Drilling (mineral extraction) 9 Durability 9 Earth-moving equipment 10 Electric connectors 10 Electric control equipment 10 Electric convertors 10 Electric power systems 10 Electrical components 11 Electrical equipment 11 Electrical household appliances 11 Electrical installations 11 Electrical medical equipment 12 Electrical protection equipment 12 Electrical safety 12 Electromagnetic compatibility (EMC) 13 Electromagnetism 13 Electron-beam welding 13 Electron beams 13 Electronic equipment and components 14


Subject Index Page

Environmental testing 14 Ergonomics 14 Ergonomics - Anthropometric characteristics 14 Extraction methods of analysis 14 Extraction (minerals) 15 Fibre optic connectors 15 Fibre optics 15 Fits 16 Flash point 16 Flexible pipes 16 Flow measurement 16 Fluid pressure 16 Food control 17 Food technology 17 Fountains 17 Friction 17 Fuels 17 Fundamental tolerances 17 Furniture 18 Fuses 18 Gas-shielded welding 18 Gas welding 18 Glassware 18 Health services 19 Helical gears 19 Hospital equipment 19 Hygiene 19 Information 20 Information security management 20 Information systems 20


Subject Index Page

Information technology 20 Insulating oils 22 Integrated circuits 22 Internal combustion engines 22 Iron ores 22 Laboratory glassware 23 Lamps 23 Latices 23 Library and information science 23 Light 23 Lighting systems 24 Load capacity 24 Low-voltage equipment 24 Magnesite 24 Management operations 25 Management system 25 Management techniques 25 Marine safety 26 Mechanical testing 26 Medical equipment 26 Milk 27 Milk products 27 Milling cutters 28 Moisture measurement 28 Moulded materials 28 Natural gas 28 Oil filters 28 Ozone 29 Paints 29 Paper 29


Subject Index Page

Paper pulp 29 Particle size measurement 29 Peeling tests 30 Performance indicators 30 Petroleum 30 Petroleum products 30 Photovoltaic cells 30 Pipe fittings 31 Pipes 31 Pipes - Plastics 31 Pipework systems 31 Plastics 31 Plastics and rubber technology 32 Plastics - Colour fastness 32 Plastics - Environmental testing 32 Plates 32 Polyvinyl chloride 32 Power measurement (electric) 33 Pressure pipes 33 Printed-circuit boards 33 Qualification approval 33 Quality assurance 33 Quality assurance systems 34 Quality control 34 Quality - Management techniques 34 Radiation measurement 34 Radio disturbances - Measurement 34 Railway engineering 34 Railway vehicles 35 Refractory materials 35


Subject Index Page

Reinforced plastics 35 Road vehicles 35 Rollers - Vulcanized rubber 36 Rotating electrical machines 36 Rubber 36 Safety measures 36 Safety requirements 36 Saturated vapour pressure 37 SCORM 37 Sections (structures) 37 Securities - Management 37 Security techniques 37 Semiconductor devices 38 Sewers 38 Shielded welding 38 Showers 38 Solders 39 Sports equipment 39 Spur gears 39 Stainless steels 39 Standard tolerances 40 Steels - Surface treatment 40 Strips 40 Surfaces - Preparation 40 Swimming pools 40 Switchgear 41 Synthetic rubber 41 Tables 41 Telephone equipment 41 Terminology 41


Subject Index Page

Testing 42 Textiles 42 Thermal environment systems 42 Thermal testing 42 Thermoplastic polymers 42 Tool shanks 43 Transportation 43 Tungsten 43 Valves 43 Vapour pressure 43 Varnishes 44 Vehicles 44 Vibration testing 44 Video recording 44 Viscosity 44 Volatile matter determination 45 Water 45 Water - Quality 45 Weirs 45 Weld metal 45 Welders 45 Welding 46 Welding equipment 46 Welding - Qualification approval 46 Welds joints 46


M33\5E@IBC3SF;G

@IBC3SF;G @5O1

GxIGJKLM 47 GMPRPcOMPTeMgSNtViW 47 GMP_clQG}]NcVWdeafbIg 47 GMPIJXPQG}]_fQWWMJ 47 TeMghfIaZQi 47 TIJGPtj 47 STPUVIWnQGPGf 47 STPUVIWNXYZQ[\] - IXhGP[] 47 opGRQe 47 ichyQg 48 PqiJj] 48 PqiJj] � ucKJNkeJ 48 P`RRRPcOMPTeMgjkISJUVIWlMWmXPGcn 48 eQNaXdf`IXhGP[]GkINPbMW 48 NMPgf_c} - PqiJj] 48 NcVWdeafbIg 48 ObIWJKLM - IXhGP[] 48 SOfHGGfbM 48 SOfHGd~kJ 48

tisi library accession list acoustic testing...

Documents