INSERT PICTURE

Titanium Advanced Woofer

SPECIFICATIONSGeneral Data FEATURES Overall Dimensions DxH * Uniflow™ Aluminum diecast chassisNominal Power Handling (DIN) P * Double magnet Ferrite systemTransient Power 10ms * Titanium coil bobbinSensitivity 2.83V/1M * 3" Large Hexatech™ Aluminum voice coilFrequency Response * High power handlingCone Material * High Xmax, Low Qts, Low Fs, High QMSNet Weight Kg

Electrical Data Unit Dimentions Nominal Impedance ZDC Resistance Re

Voice Coil Inductance @ 1KHz LBM

Voice Coil and Magnet ParametersVoice Coil Diameter DIAVoice Coil Height HE Magnetic Gap Height HE

Max. Linear Excursion XVoice Coil bobbinVoice Coil WireNumber Of Layers

TiW 634Ft

150W1000W88dB See graph

Ø 6", Ø 3" voicecoil, 4

Damped Polymer Composite

160mm (6.3") x 69mm (2.71")

Hexatech™ Aluminum2

14.5 mm (0.62")6 mm (0.20")

± 4.25mmTitanium

1.2 Kg

43.6 0.45 mH

75 mm (3")

Number Of LayersMagnet System TypeB Flux Density BBL Product BXL

T-S Parameters Small Signal 1 VSuspension Compliance Cms 0.998 mm/N 1.273 mm/N A - Overall diameter 160mm Mechanical Q Factor Qms 4.30 4.50 B - Cut out diameter 140mm Electrical Q Factor Qes 0.43 0.43 C - Flange thickness 6mm Total Q Factor Qts 0.39 0.39 D - Overall height 69mm Mechanical Resistance Rms 0.923 m 0.803 m E - Basket + magnet depth 63mm Moving Mass Mms 15.7 gr F - Mounting holes location diameter 152mm Eq. Cas Air Load (liters) VAS 19.7 Lt. 26 Lt. G - 6 Mounting holes, at 60º interval, Resonant Frequency Fs 40 Hz 34 Hz inner hole diameter Ø 4.2mm Effective Piston Area SD 119 cm ²

Measured on IEC baffle using Bruel & Kjaer 3144 model microphone.

Morel operate policy of continuous product design improvement, consequently specifications are subject to alteration without prior notice.

5.6 N.A

2Double Magnet Ferrite 0.66 T