tm xtender pole - platinum tools• xtender pole-12 (three 4' sections, ceilings up to...
TRANSCRIPT
Xten
der
Pole • Work from the floor
• Speed Installation• Improve Safety• Save money
TM
The professional contractor’s and low-voltage cable installer’s tool for easier overhead installations. Working from the floor provides a safer way to reach areas that previously were dangerous or inaccessible by ladders, scaffolding, and scissor lifts.... including vaulted ceilings, over stairwells, and through ceiling grid. This multi-purpose telescoping pole has interchangeable heads for installing J-Hooks, eye lag screws, ceiling wire, jack chain and threaded rod from the work floor.
Features• Install hanging hardware from work floor, improves
safety and efficiency• All-In-One adapter system for threaded rod, eye lag
screws, wire & jack chain• Install multiple fastener types to a variety of ceiling
structures – Elco®, Hanger Mate®, Buildex Sammy Super Screws®, Powers VertigoTM
• Powered with any 3/8" or 1/2" drill• Includes female hex adapter for 1/4" male driver
and 5/8" hex adapter• Video instructions for applications (Platinum website)• Tips & Instruction Booklet• Xtender Pole-12 (three 4' sections, ceilings up to 18')• Xtender Pole-18 (three 6' sections ceilings up to 24')
Applications• Hang ceiling wire (12 or 9 gauge)
Install up to 100 ceiling wires per hour.• Hang Threaded Rod
3/8" or 1/4" rod up to 10 feet long.• Overhead Screw Installation
Transforms into a very long screwdriver.• Hang Jack Chain
Easily from the work floor.• Hang Wire & Clip Assemblies
Eye lag screws, hangers, multi-purpose clips.
Technical Data• Material: Aircraft quality aluminum• Finish: Black anodized
See reverse for additional information.
California, USA Phone: 805.384.2777 / 800.749.5783 • Fax: 800.749.5784
www.platinumtools.comWe Make Connections EZ!™
Xtender Pole™
Adapters:
1/2" Hex - Use with Elco® HangerMate screws to install 1/4-20 or 3/8-16 threaded rod.
Included:
Drill Adapter - JH707Power the pole with any 3/8" or 1/2" drill
Additional adapters:
Saves money. Speeds installation. Improves safety.
AdapterBase
Open End 3/8" Adapter - JH702Use to install threaded rod.
1/2" NPT Adapter - JH705Use with installation tool, P/N JH975 or any other tool requiring 1/2" NPT (National Pipe Thread.)
Keyless Chuck Adapter, 3/8” - JH711
Female Open End 5/8" Hex Adapter - JH703For installing ITW Buildex Sammy Super Screws® & will work with Powers Vertigo™. For use with 1/4-20 & 3/8-16 threaded rod installation.
Female Hex Adapter for 1/4" Male Driver - JH701Use with any 1/4" hex bit.
(Shown with Phillips bit to create a very long screwdriver.)
Installation Tool - JH975For vertical (JH901-100) & angled (JH902-100) overhang.
Versatility comes from the unique adapter heads that are specific to each application.
Wire & chain adapter included.
Xtender Pole & AccessoriesPart No. Description UPCJH712 Xtender Pole-12 – (Box) 849160004202
JH718 Xtender Pole-18 – (Box) 849160004219
JH711 Keyless Chuck Adapter, 3/8” 849160010180
JH701 Female Hex Adapter – 1/4” Male Driver 849160004226
JH702 Open End 3/8” Adapter 849160004233
JH703 Female Open End 5/8” Hex Adapter 849160004240
JH705 1/2” NPT Adapter 849160004264
JH707 Drill Adapter 849160004288
JH975 Installation Tool – Vertical Overhang – (Box) 849160002987
We Make Connections EZ! ™
2017© Platinum Tools, Inc. All rights reserved. Xtender Pole 12/17 JB
California, USA Phone: 805.384.2777 / 800.749.5783 • Fax: 800.749.5784
www.platinumtools.com