tnavigator. advanced technologies for dynamic simulations ... · units manager unit systems that...
TRANSCRIPT
![Page 1: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/1.jpg)
Rock Flow Dynamics
October 2019
tNavigator 19.3
![Page 2: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/2.jpg)
Key new features in 19.3
tNavigator kernel: Full GPU version is available for black oil models.
Geology Designer: New interpolation algorithms are available — TGS (Truncated Gaussian
Simulation) and Convergent.
Model Designer: Well pattern templates may be used to add new wells.
PVT Designer: Li critical temperature coefficient may be set in compositional variants to
calculate critical point temperature.
![Page 3: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/3.jpg)
Key new features in 19.3 (continued)
AHM and Uncertainty module: Several scenarios of adding variables to the workflow are introduced in Model
Designer. Variables the user can select are: RP parameters, equilibration parameters, property multipliers by regions.
VFP Designer: New object is available – Pressure Gauge.
Network Designer: New object is available – Gas lift; gaslift network may be built.
![Page 4: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/4.jpg)
Changes to the common interface
Many changes affect multiple modules, but are only mentioned once in this presentation. These include: Dark interface theme, Addition of wells (DLS, well pattern templates), Units manager, Backup manager, …etc.
For the full list of changes to each particular module read the Release Notes. This presentation contains just the main changes to every module. The complete list of changes, and also the new keywords and options are likewise available in the Release Notes
![Page 5: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/5.jpg)
Module: Simulator kernel Version 19.3
tNavigator kernel
![Page 6: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/6.jpg)
Full GPU version is available for black oil models (some part of calculations may still be run on CPU in case if the model contains many complex operations for wells).
What calculations are run on GPU is determined by the option GPU_MODE of the keyword TNAVCTRL.
tNavigator kernel Module: Simulator kernel Version 19.3
Linear solver
GPU_MODE value
1
Relative permeabilities
Compositional flash
Newton solver
2 3
4
![Page 7: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/7.jpg)
Export of OFM summary file is introduced (keyword OFM)
Export of RSM file in Excel-suitable format is enabled (keyword EXCEL)
Data input/output
Spaces
SEPARATE / RUNSUM EXCEL
OFM
Tabs
Module: Simulator kernel Version 19.3
![Page 8: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/8.jpg)
Module: Graphical Interface Version 19.3
Graphical Interface
![Page 9: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/9.jpg)
Modules: Graphical interface Geology Designer
Model Designer PVT Designer
Network Designer VFP Designer Version 19.3
Dark interface theme White text against black background
![Page 10: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/10.jpg)
Sample scripts in calculator
Sample scripts may be loaded to the Graph Calculator (Import Library Scripts button)
Import
Library
Scripts
Module: Graphical Interface Model Designer
Version 19.3
![Page 11: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/11.jpg)
Module: AHM and Uncertainty Version 19.3
AHM and Uncertainty
![Page 12: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/12.jpg)
Create real case from values of proxy model
Real simulation case may be created from the variant built by Monte Carlo algorithm for proxy model
Module: AHM and Uncertainty Version 19.3
![Page 13: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/13.jpg)
Objective function control points Historical points may be checked/unchecked in the table to be used or not
used in the objective function calculation (check Use near the point in the table on the right)
Module: AHM and Uncertainty Version 19.3
![Page 14: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/14.jpg)
Graph calculator
New modes of script execution speed up the loading of big AHM projects: • Automatically run script for new models • Script defined for single well
AHM variables can now be accessed directly from scripts (see the Variables tab in the list of objects)
Modules: Model Designer, AHM and Uncertainty
Version 19.3
![Page 15: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/15.jpg)
Scenarios in Model Designer
The following scenarios for adding variables to workflow are now available in Model Designer
• Adjust Analytical RP Table • Adjust Equil Table • Multiply Property by Regions • Multiply Faults • Expand Grid Property in Cosines • Aquifer Settings
Add variables
to Workflow
Modules: Model Designer, AHM and Uncertainty
Version 19.3
![Page 16: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/16.jpg)
Module: PVT Designer Version 19.3
PVT Designer
![Page 17: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/17.jpg)
Li correlation coefficient
In a compositional variant, Li correlation coefficient for critical temperature can be calculated and used
When using this coefficient, the critical temperature on the “Saturation Pressure” graph and in the Simulator coincides with that on the Phase Envelope which is calculated with higher precision
Module: PVT Designer Version 19.3
![Page 18: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/18.jpg)
Module: Network Designer Version 19.3
Network Designer
![Page 19: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/19.jpg)
Object Constraints New parameters are available for the object Constraints. New control types
that may be used: ORAT, GRAT, WRAT, LRAT, molar rate Minimum, maximum and target values of the control may be set
Module: Network Designer Version 19.3
![Page 20: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/20.jpg)
Object Constraints It is allowed to maintain pressure in regions
Module: Network Designer Version 19.3
![Page 21: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/21.jpg)
Object Master Constraints Several Constraints may be connected to each other using the object Master
Constraints. Constraints specified by the Master object will be used for all Constraints objects connected with it
Module: Network Designer Version 19.3
![Page 22: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/22.jpg)
Object Automatic Choke Automatic Choke may be controlled by inlet/outlet pressure Minimum, maximum and target values may be set for selected control of the
Automatic Choke (pressure)
Module: Network Designer Version 19.3
![Page 23: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/23.jpg)
New object is available -- Gas lift
Module: Network Designer Version 19.3
Gas lift object
![Page 24: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/24.jpg)
Injection network may be constructed and calculated
Module: Network Designer Version 19.3
Gas lift network
![Page 25: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/25.jpg)
Merging of compositional variants Merging of several compositional variants (EOS blend) may be used in
integrated model surface-subsurface. In case if there are several EOS regions in the model, then the data to merge is passed to the EOS blend function, the resulting fluid may be used in surface network calculation.
Module: Network Designer Version 19.3
EOS Blend
Well1
Well2
EOS 1
EOS 2
![Page 26: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/26.jpg)
Python Object Templates Python Object templates can be created
Module: Network Designer Version 19.3
![Page 27: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/27.jpg)
VFP Designer Module: VFP Designer Version 19.3
![Page 28: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/28.jpg)
Pressure Gauge New object is available – Pressure Gauge
Module: VFP Designer Version 19.3
![Page 29: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/29.jpg)
Well construction copy Well construction may be copied from other VFP projects to the current
project with an appropriate scale (for example if tubing in the source project was from the beginning to the middle of the casing, then the proportion will be the same in the current project)
Well construction will be copied from Project 1 to Project 3
Module: VFP Designer Version 19.3
![Page 30: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/30.jpg)
Multiediting Parameters of Basic data (well type, preferred phase, etc.), tables with
Samples etc. may be edited simultaneously in different VFP projects
Module: VFP Designer Version 19.3
![Page 31: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/31.jpg)
Module: Model Designer Version 19.3
Model Designer
![Page 32: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/32.jpg)
Modules: Geology Designer Model Designer
PVT Designer Network Designer
VFP Designer Version 19.3
Units manager
Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom systems which combine different units in any possible way
The unit system may be changed at any point. All calculated and entered data would be converted to the new unit system automatically.
![Page 33: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/33.jpg)
Take the DLS into account
Control of the curvature of the trajectory when a well is added If this option is activated, the created trajectory will be corrected in order to fit the
conditions of the upper value and the step of fragmentation (corresponding to the number of points that will be added between two defined points).
Modules: Geology Designer Model Designer
Version 19.3
![Page 34: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/34.jpg)
Modules: Geology Designer Model Designer
Version 19.3
Well placement editor
Wells Placement editor allows to create wells (injector and producers) Predefined common waterflood-pattern configurations User-defined configurations The placement is performed within an area bounded by Polygons
Regular five-spot, seven and nine designs.
Direct and staggered vertical line drives, direct
and staggered horizontal line drives
![Page 35: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/35.jpg)
Well templates Modules: Geology Designer Model Designer
Version 19.3 Each added type of wells can be designed and the controls and limits can be set
For each type of added well pattern, the geometry can edited
The list of objects and their location can be manually edited from the table
![Page 36: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/36.jpg)
BlockedWells in dynamic model
Production data from connections may be projected to the grid (DynamicModel → BlockedWells → BlockedWells by connections).
The created BlockedWells may be visualized in 3D or on the Well Section to analyze well production profile.
Module: Model Designer Version 19.3
![Page 37: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/37.jpg)
Hydraulic fractures Different increment size of Near-Fracture Zone may be used in different
directions Fracture template settings → Optional parameters → Increment size of Near-Fracture Zone (Stimulated Delta 1/2/Up/Down)
Module: Model Designer Version 19.3
![Page 38: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/38.jpg)
Export/Import Template The table template may be specified for hydraulic fracture, defining the list of
columns to load; this selection may be used while importing the next table (button on the right panel Export/Import Template)
Module: Model Designer Version 19.3
![Page 39: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/39.jpg)
Create LGR by Fracture Stage Fracture stage may be imported and may be used them to create LGR
(calculations Fracture Stage → Import → Import Fracture Stage, Grids → LGR operations → Create LGR by Fracture Stage)
Module: Model Designer Version 19.3
![Page 40: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/40.jpg)
Module: Geology Designer Version 19.3
Geology Designer
![Page 41: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/41.jpg)
2D Visualization:
Visualize the interpreted or the imported seismic horizon in 2D
Display the contour lines
Data Quality Check (seismic) Module: Geology Designer Version 19.3
![Page 42: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/42.jpg)
A new well may be added in the Wells Table
Wells can be copied with a defined shift
A specific color can be assigned to each well from Wells Table and diplayed in 3D
Wells management Modules: Geology Designer Model Designer
Version 19.3
![Page 43: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/43.jpg)
Well icons can be assigned according to the well code and visualized in 2D
Wells management Modules: Geology Designer Model Designer
Version 19.3
![Page 44: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/44.jpg)
Well filters exist as separate objects in the objects tree:
Well Filters can be used on 2D, 3D, Well Table tabs
Well filters can be created by well attributes, markers, properties, horizons, Log curves, comment logs, selecting the wells where those objects are defined
Well filters
If a parent well filter is selected, the created filter will be placed under the parent filter.
A filter created using a parent filter cannot
contain more wells than the parent filter and the wells selected in this filter must be included in the parent one.
Modules: Geology Designer Model Designer
Version 19.3
![Page 45: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/45.jpg)
Water Saturation Regression
It is suitable for a trend of saturation modeling a и b coefficients are calculated based on well data 3D Porosity model is converted into Sw model by Cuddy relationship
Sw = (a*H^b)/Phit (Cuddy et al. (1993))
• a и b – coefficients • Sw- water saturation • H – height above contact • Phit – porosity
Module: Geology Designer Version 19.3
![Page 46: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/46.jpg)
Thickness calculation by markers Define the name of a Well Attribute Define the Attribute Depth Select the Top and Bottom well markers for thickness calculation Toggle on the Well Filter Define the Scale Type: MD or TVD
Module: Geology Designer Version 19.3
![Page 47: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/47.jpg)
The possibility to compute reservoir top and bottom markers using a discrete log (corresponding to the facies for example) was implemented:
First, you need to define the interval, in which it is sure to find the reservoir. These markers will delimitate the searching area.
A lithology log has to be defined. The deepest reservoir lithology point will be the bottom of the reservoir, while the shallowest one will be the top.
Well markers Module: Geology Designer Version 19.3
![Page 48: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/48.jpg)
Well Section Possibility to set as default the well log display settings Possibility of temporary data hiding
Module: Geology Designer Version 19.3
GK visualization is temporary switched off
![Page 49: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/49.jpg)
Fault lines are computed and taken into account during the structural model building
Structural model horizons can be built using the fault lines
Structural model Module: Geology Designer Version 19.3
![Page 50: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/50.jpg)
Work with Point Sets Point selection using lasso tool. Ctrl button may be used to select several
areas one by one
Module: Geology Designer Version 19.3
![Page 51: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/51.jpg)
Random Point Set may be created inside the boundary polygon
Work with Point Sets Module: Geology Designer Version 19.3
![Page 52: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/52.jpg)
Faults can be created by sticks (Sticks have to be loaded as polygons)
Faults by sticks and merging faults
Faults can be merged
Module: Geology Designer Version 19.3
![Page 53: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/53.jpg)
A color can be assigned to each fault and be displayed in 3D and 2D
Faults visualization Module: Geology Designer Version 19.3
![Page 54: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/54.jpg)
Convergent interpolation method for horizons and 2D-Maps The advantage of the method is its flexibility. It reliably works both with linear data
type (for example, seismic interpretation of faults) and with point data of high (seismic interpretation of horizons) and low (well markers) density.
2D map calculation by “Thickness between markers” attribute
Module: Geology Designer Version 19.3
![Page 55: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/55.jpg)
Dip Angle and Azimut Map by Horizon
Dip and Azimut map can be computed by horizons
Definition of the azimuth: Vn is the normal vector to the direction vector Vd
The azimuth is defined as the angle between the projection of the normal vector to the direction vector of the horizon and Y axis
Definition of the dip: Vn is the normal vector to the direction vector Vd The dip is defined as the angle between the projection of the
normal vector to the direction vector of the horizon and Z axis
Module: Geology Designer Version 19.3
![Page 56: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/56.jpg)
Module: Geology Designer Version 19.3
Local Map Update Well Filter Inner Bounding Polygon. Select a polygon that bounds a map region to be updated Outer Bounding Polygon. It is used to create a buffer zone in order to provide a smooth
coupling of updated part of map with the rest of it
![Page 57: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/57.jpg)
Top and base layering horizons
During the grid building, the layering horizon used for the base of the zone can be different from the top of the previous zone
Zone 3: Top1 and Top5 are used as layering horizons
Top1
Top2
Top4 Top5
Module: Geology Designer Version 19.3
![Page 58: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/58.jpg)
Truncated Gaussian Simulation
TGS is suitable in the case when facies consistently replace each other in the subsurface and don’t have the clear geometrical shape.
Module: Geology Designer Version 19.3
![Page 59: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/59.jpg)
Identify the connectivity between wells using connected components
This option allows to compute the components related to the blocks contained in the blocked wells (i.e. related to the wells) and to identify the "effective" components and the connectivity between the wells
A classifier property (the lithology for example) has to be selected As input a given blocked wells is used, from which the connected components property will be build,
and the given property Index, according to which the calculation will be performed (Index – one of the values of Classifier property). Everything else is not taken into account, and a zero value is assigned
A) Lithology property displayed on a cross-section. Yellow areas correspond to the reservoir zones. B) Resulting connected components associated to the blocked wells. 4 components are computed.
Module: Geology Designer Version 19.3
![Page 60: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/60.jpg)
Module: Geology Designer Version 19.3
Cross-sections via any objects
A cross-section can be built based on any geometry object, including grids, pointsets, horizons, etc.
Cross-sections may be created via Calculations, and also via workflows
Use grid Use horizons
![Page 61: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/61.jpg)
Modules: Geology Designer Model Designer
AHM and Uncertainty Version 19.3
Saving properties from variants
All grid properties, horizons, 2D maps, and tables, calculated for different Uncertainty (AHM) variants at different variable values, are stored in the initial model.
![Page 62: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/62.jpg)
Modules: Geology Designer Model Designer
Version 19.3
Automatic backups
Backup copies of Designer project are made automatically Frequency and the number of copies to keep are set by the user
![Page 63: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/63.jpg)
Modules: Geology Designer Model Designer
PVT Designer Network Designer
VFP Designer Version 19.3
Zip archive of a project
An entire Designer project can be put in a single zip archive
Geology & Model Designers Network, PVT, and VFP Designers
![Page 64: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/64.jpg)
Module: Documentation Version 19.3
Documentation & Localization
![Page 65: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/65.jpg)
Localization Module: Documentation Version 19.3
Translated into Spanish: graphical interface of PVT Designer, AHM and Uncertainty module.
Translated into Chinese: graphical interface of Geology Designer, Network Designer, and VFP Designer.
Translated into both: • License server Administration Guide • Dispatcher Administration Guide
Translated into Chinese: …
![Page 66: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/66.jpg)
More built-in context help
Embedded help has been added to the Simulator graphical interface
Module: Documentation Version 19.3
![Page 67: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/67.jpg)
New tutorials Module: Documentation Version 19.3
SIM0.3 EOR Tools In Simulator General overview of EOR options: Alkaline, Surfactant, Polymer (ASP), BrightWater nanopolymer technology, Foam; Salinity (dissolution of rock salt, low salinity combined with ASP); CO2 injection, WAG, alternating water-gas injection, mixed injection; Thermal methods (steam-assisted gravity drainage, combustion in situ).
GD7.1. How To Use Python Scripts For Static Modeling An example of Python scripts in Geology Designer. The tutorial uses the Teapot dome field (open source data set – 1315 wells). A custom Python workflow is built, demonstrating the basic language features and the use of predefined Geology Designer Python functions.
AHM1.12 How To Do Economic Optimization An example of Field Development Planning optimization coupled with an economic model calculated via user-defined algorithms in MS Excel. Integration between tNavigator and MS Excel is done via custom Python script.
MDAHM1.3 How To Find The BestWell Trajectory Optimization of the trajectory of horizontal well. A Python workflow is used to vary the geometry of the model. The best variants is then located using the AHM optimization algorithms.14
Simulator
Geology Designer
AHM and Uncertainty
Model Designer + AHM
![Page 68: tNavigator. Advanced technologies for dynamic simulations ... · Units manager Unit systems that may be used in a project include: METRIC, FIELD, LAB, and an arbitrary number of custom](https://reader034.vdocument.in/reader034/viewer/2022042110/5e8a37877b195d4f3433307c/html5/thumbnails/68.jpg)
Thank you for your attention! Module: Documentation Version 19.3
The complete list of new features is available in Release Notes
Rock Flow Dynamics www.rfdyn.com [email protected]