tool solutions - save on top-quality glass tiles & glass gems

TM

TOOL SOLUTIONSProviding tools for tile and stone installations

C o n t e n t sIntroduction

1 Index of Products

2 - 19 Tools

3 Trowel Guide

www.mapei.com

Introduction

The Total SolutionMAPEI can provide architects, builders and contractors “The Solution” for all flooring

projects. This total solution means a single-source system for all floor coverings from

the ground up … all fully guaranteed and compatible with all specified manufacturers.

www.mapei.com

Index of Products 1

Preparation ToolsLevels, Measuring Tools

and Accessories

12" Undercut Saw . . . . . . . . . . . . . . . . . 6

Backerboard Cutter . . . . . . . . . . . . . . . . 6

12" Torpedo Level . . . . . . . . . . . . . . . . . 7

24", 48", 72" Levels . . . . . . . . . . . . . . . . 7

16" Level . . . . . . . . . . . . . . . . . . . . . . . . 7

Box-Style Screed Set . . . . . . . . . . . . . . 8

“L”-Angle Screed Set . . . . . . . . . . . . . . 8

Measuring Tape . . . . . . . . . . . . . . . . . .13

Backerboard Joint Tape . . . . . . . . . . . .13

Caution Tape . . . . . . . . . . . . . . . . . . . . .13

Shavers, Scrapers and Accessories

4" Wall Shaver w/ 12" Handle . . . . . . . .11

4" Wall Shaver w/ 18" Handle . . . . . . . .11

4" Shaver Replacement Blades . . . . . . .11

8" Extension Handle Scraper . . . . . . . . .11

8" Heavy-Duty

Replacement Scraper Blade . . . . . . .11

8" Replacement Scraper Blade . . . . . . .12

Floor Scraper w/ 14" Blade . . . . . . . . . .12

14" Replacement Scraper Blade . . . . . .12

8" Heavy-Duty Floor Scraper . . . . . . . . .12

Mapelath™ Installation System

Mapelath™ Air Stapler . . . . . . . . . . . . . .19

Rubber Air Hose . . . . . . . . . . . . . . . . . .19

Mapelath™ Staples. . . . . . . . . . . . . . . . .19

Air Compresser 2.5 HP . . . . . . . . . . . . .19

Installation ToolsMixing Tools

Angled Cross Blade Mixer . . . . . . . . . . .10

Double Pinwheel Mixer . . . . . . . . . . . . .10

Double Box Mixer . . . . . . . . . . . . . . . . .10

Single Box Mixer. . . . . . . . . . . . . . . . . .10

Plastic Bucket . . . . . . . . . . . . . . . . . . . .16

Tile-Cutting Tools and Accessories

“DIY” Hand Tile Cutter . . . . . . . . . . . . . 4

Pro-Style Tile Nippers . . . . . . . . . . . . . 4

Econo Tile Nippers . . . . . . . . . . . . . . . . 4

16" Two-Bar Tile Cutter . . . . . . . . . . . . . 5



“DIY” 13" Two-Bar Tile Cutter . . . . . . . . 5

“DIY” 12" Two-Bar Tile Cutter . . . . . . . . 5

7/8" Replacement Cutter Wheel . . . . . . 5

1/2" Replacement Cutter Wheel . . . . . . 5

Rubbing Stone . . . . . . . . . . . . . . . . . . . 6

1-3/8" Carbide Hole Saw . . . . . . . . . . . 6

1-3/8" Diamond Hole Saw . . . . . . . . . . 6

10" Rod Saw . . . . . . . . . . . . . . . . . . . . 6

6" Rod Saw . . . . . . . . . . . . . . . . . . . . . 6

Coping Saw . . . . . . . . . . . . . . . . . . . . . 6

Installation Accessories

Wedge Spacers . . . . . . . . . . . . . . . . . . 8

Tile Spacers . . . . . . . . . . . . . . . . . . . . . 8

Spacer Puller . . . . . . . . . . . . . . . . . . . . 8

Leave-In Spacers . . . . . . . . . . . . . . . . . 8

Spacer Popper . . . . . . . . . . . . . . . . . . . 8

Tile Markers . . . . . . . . . . . . . . . . . . . . .13

Soft-Cap Kneepads . . . . . . . . . . . . . . .14

Accordion-Style Kneepads . . . . . . . . . .14

“DIY” Kneepads . . . . . . . . . . . . . . . . . .14

MAPEI Softgel Kneepads . . . . . . . . . . .14

“DIY” Vinyl Utility Gloves . . . . . . . . . . .15

Plastic Bucket . . . . . . . . . . . . . . . . . . . .16

MAPEI Work Gloves . . . . . . . . . . . . . . .15

Handyman Tile Tool Bucket . . . . . . . . .17

Contractor Tile Tool Bucket . . . . . . . . .17

Vacuum Suction Cup . . . . . . . . . . . . . .18

Installation Trowels

ProGrip Notched Trowel . . . . . . . . . . . . 2

WoodGrip Notched Trowel . . . . . . . . . . 2

Econo Notched Trowel . . . . . . . . . . . . . 2

Notched Margin Trowel . . . . . . . . . . . . 2

Trowel Guide . . . . . . . . . . . . . . . . . . . . 3

ProGrip Margin Trowel . . . . . . . . . . . . . 4

WoodGrip Margin Trowel . . . . . . . . . . . 4

“DIY” Margin Trowel . . . . . . . . . . . . . . 4

Cement Finishing Trowel. . . . . . . . . . . . 4

GroutingGrout Application Tools

Aluminum Grout Float. . . . . . . . . . . . . . 9

Aluminum Offset Grout Float. . . . . . . . . 9

Plastic Grout Float. . . . . . . . . . . . . . . . . 9

Plastic Offset Grout Float . . . . . . . . . . . 9

Epoxy Grout Float . . . . . . . . . . . . . . . . . 9

Molded Rubber Grout Float. . . . . . . . . . 9

“DIY” Grout Float . . . . . . . . . . . . . . . . . 9

Margin Grout Float . . . . . . . . . . . . . . . . 9

Grout Bag . . . . . . . . . . . . . . . . . . . . . . . 9

Grout Accessories

Tile Setter's Grout Gloves . . . . . . . . . .15

Scrub Pads . . . . . . . . . . . . . . . . . . . . .16

Scrub Bug Pad Holder . . . . . . . . . . . . .16

Cheesecloth . . . . . . . . . . . . . . . . . . . . .16

Plastic Grout Brush . . . . . . . . . . . . . . .16

Large Grout Sponge . . . . . . . . . . . . . . .18

Square-Edge Cellulose Sponge . . . . . .18

Combo Grout Scrubber Sponge . . . . . .18

Flagged Tip Counter Brush . . . . . . . . . .18

Grout Sealing Tools

Grout Sealer Applicator Wand . . . . . . .15

Brush Tip Sealer Applicator . . . . . . . . .15

Grout-Cutting Tools and Accessories

Pro-Style Grout Saw . . . . . . . . . . . . . . 7

Grout Saw Blades . . . . . . . . . . . . . . . . . 7

Econo Grout Saw . . . . . . . . . . . . . . . . . 7

Carbide Triangle Grout Saw . . . . . . . . . 7

Carbide Tile File . . . . . . . . . . . . . . . . . . 7

www.mapei.com

Installation Tools2

PROGRIP NOTCHED TROWELFeaturesThe ProGrip Notched Trowels are built for the professional. They feature the ProGrip – a super-comfortable, nonslip, molded-rubber handle. It is attached to a rust-proof, stainless steel blade with a die-cast aluminum shank. These trowels are designed to spread thin-set and mortar for all ceramic tile, marble and stone installations.


Number Dimensions Notch UPC Code

04227 1/16" x 1/16" x 1/16" (2 x 2 x 2 mm) V 0-93994-04227-9

04228 1/16" x 1/16" x 1/16" (2 x 2 x 2 mm) SQ 0-93994-04228-6

04229 1/8" x 1/8" x 1/8" (3 x 3 x 3 mm) U 0-93994-04229-3

04230 1/8" x 3/16" x 1/8" (3 x 5 x 3 mm) U 0-93994-04230-9

04232 3/16" x 5/32" x 3/16" (5 x 4 x 5 mm) V 0-93994-04232-3

04233 1/4" x 3/8" x 1/4" (6 x 9 x 6 mm) SQ 0-93994-04233-0

04234 1/4" x 3/8" x 1/4" (6 x 9 x 6 mm) U 0-93994-04234-7

04235 1/4" x 1/2" x 1/4" (6 x 12 x 6 mm) U 0-93994-04235-4

04236 3/16" x 1/4" x 5/16" (5 x 6 x 8 mm) V 0-93994-04236-1

04237 3/4" x 9/16" x 3/8" (19 x 14 x 9 mm) U 0-93994-04237-8

04238 1/4" x 3/16" x 1/4" (6 x 5 x 6 mm) V 0-93994-04238-5

04239 1/4" x 5/16" x 1/4" (6 x 8 x 6 mm) U 0-93994-04239-2

04240 1/4" x 1/4" x 1/4" (6 x 6 x 6 mm) SQ 0-93994-04240-8

04241 1/2" x 1/2" x 1/2" (12 x 12 x 12 mm) SQ 0-93994-04241-5

Packaged 6 per case

WOODGRIP NOTCHED TROWELFeaturesThe WoodGrip Notched Trowels are built for the professional. They feature a comfortable, hardwood handle attached to a flexible, spring steel blade with a die-cast aluminum shank. These trowels are designed to spread thin-set and mortar for all ceramic tile, marble and stone installations.


04214 1/16" x 1/16" x 1/16" (2 x 2 x 2 mm) SQ 0-93994-04227-9

04215 1/8" x 3/16" x 1/8" (3 x 5 x 3 mm) U 0-93994-04228-6

04216 3/16" x 5/32" x 3/16" (5 x 4 x 5 mm) V 0-93994-04229-3

04217 1/4" x 3/8" x 1/4" (6 x 9 x 6 mm) SQ 0-93994-04230-9

04218 3/4" x 9/16" x 3/8" (19 x 14 x 9 mm) U 0-93994-04232-3

04219 3/16" x 1/4" x 3/16" (5 x 6 x 5 mm) V 0-93994-04233-0

04220 1/4" x 1/4" x 1/4" (6 x 6 x 6 mm) SQ 0-93994-04234-7

04221 1/2" x 1/2" x 1/2" (12 x 12 x 12 mm) SQ 0-93994-04235-4

Packaged 6 per case

ECONO NOTCHED TROWELFeaturesThe Econo Notched Trowels are tough, economical adhesive spreaders designed for do-it-yourself projects, or where a disposable trowel is needed. These trowels feature a 4" x 9" (101 x 228 mm) carbon steel blade with a sturdy, molded plastic handle.


04252 1/16" x 1/32" x 1/32" (2 x 1 x 1 mm) U 0-93994-04252-1

04253 1/16" x 1/16" x 1/16" (2 x 2 x 2 mm) SQ 0-93994-04253-8

04254 1/8" x 1/8" x 1/8" (3 x 3 x 3 mm) U 0-93994-04254-5

04255 1/8" x 3/16" x 1/8" (3 x 5 x 3 mm) U 0-93994-04255-2

04256 3/16" x 5/32" x 3/16" (5 x 4 x 5 mm) V 0-93994-04256-9

04257 1/4" x 3/8" x 1/4" (6 x 9 x 6 mm) SQ 0-93994-04257-6

04258 3/32" x 3/32" x 3/32" (2,2 x 2,2 x 2,2 mm) SQ 0-93994-04258-3

04259 3/16" x 1/4" x 3/16" (5 x 6 x 5 mm) V 0-93994-04259-0

04260 1/4" x 1/4" x 1/4" (6 x 6 x 6 mm) SQ 0-93994-04260-6

04261 1/2" x 1/2" x 1/2" (12 x 12 x 12 mm) SQ 0-93994-04261-3

Packaging Specs: 12 per case

NOTCHED MARGIN TROWELFeaturesThe Notched Margin Trowels are designed for the professional. Each is built with a lacquered, hardwood handle and a flexible, spring steel blade. This margin trowel is designed to spread setting materials on V-cap and hard-to-reach areas for all ceramic tile, marble and stone installations.


04206 3/16" x 5/32" x 3/16" (5 x 4 x 5 mm) V 0-93994-04206-4

04207 3/16" x 1/4" x 3/16" (5 x 6 x 5 mm) V 0-93994-04207-1

04208 1/4" x 1/4" x 1/4" (6 x 6 x 6 mm) SQ 0-93994-04208-8


www.mapei.com

1/4"1/4"3/8" 1/4"

1/4"1/2" 5/16" 1/4"1/4" 1/32" 1/16"

1/32"

1/16"1/16" 1/16" 3/16"3/16"5/32" 1/4"

1/4" 3/8"

3/16"3/16"1/4" 1/4" 1/4"

1/4"

1/2"

1/2"1/2"

1/16"1/16" 1/16" 3/16"5/16"1/4"

Trowel Guide 3

Dimensions 1/4" x 3/8" x 1/4"(6 x 9 x 6 mm)

Notch U

Uses 6" x 6" to 9" x 9" on masonry walls and concrete


Notch U

Uses 12" x 12" and larger on masonry walls, concrete and drywall


Notch U

Uses Wall tile and ceramic mosaics on masonry and concrete

Dimensions 1/16" x 1/32" x 1/32" (2 x 1 x 1 mm)

Notch U

Uses Carpet adhesives and vinyl composition floor less than 1/8" thick


Notch SQ

Uses Linoleum tiles, felt backed sheet goods, vinyl composition floor tile 1/8" thick

1/8"1/8" 1/8"


Notch U

Uses Carpet adhesives: Rough or deeply textured backed carpet, double glue-down carpet over pad installation


Notch V

Uses Plastic wall, ceramic and metal tile


Notch SQ

Uses Ceramic and quarry tile


Notch V

Uses Ceramic, metal and aluminum tile


Notch SQ

Uses Thin-set mortar installations, ceramic floor tile, laminated wood plank flooring


Notch SQ

Uses Large-format ceramic and quarry tile

1/8"3/16" 1/8"


Notch U

Uses Carpet adhesives: Rough or deeply textured backed carpet, double glue-down carpet over pad installation


Notch V

Uses Carpet and linoleum tiles

3/4"

3/8"

9/16"


Notch U

Uses Large-format ceramic and quarry tile


Notch V

Uses Wood wall paneling, plywood, drywall, fiberglass reinforced paneling (F.R.P.)

3/32"3/32" 3/32"

Dimensions 3/32" x 3/32" x 3/32" (2,2 x 2,2 x 2,2 mm)

Notch SQ

Uses Carpet and linoleum tiles

www.mapei.com


“DIY” HAND TILE CUTTER FeaturesThe “DIY” Hand Tile Cutter is equipped with a 1/2" (12 mm) carbide cutting wheel, rubber handle grips and attached breaker assembly. This economical cutter provides the ability to score and cut tile in both straight or curved lines.

Number UPC Code

04296 0-93994-04296-5


PRO-STYLE TILE NIPPERSFeaturesThe Pro-Style Tile Nippers are built for professional use. They are equipped with carbide-tipped offset jaws, die-cast metal construction, polished head and yellow vinyl handle grips.

Number UPC Code

04297 093994-04299-6


OFFSET TILE NIPPERS FeaturesThe “DIY” Hand Tile Cutter is equipped with a 1/2" (12 mm) carbide cutting wheel, rubber handle grips and attached breaker assembly. This economical cutter provides the ability to score and cut tile in both straight or curved lines.

Number UPC Code

04299-099 0-93994-04299-6


ECONO TILE NIPPERSFeaturesAs the economical version of the Pro-Style, the Econo Tile Nippers are equipped with carbide-tipped offset jaws, die-cast metal construction, black head and red vinyl handle grips.

Number UPC Code

04298 0-93994-04298-9


PROGRIP MARGIN TROWELFeaturesThe ProGrip Margin Trowels are built for professional use. They feature the ProGrip – a nonslip, molded-rubber handle that is attached to a hardened steel blade. They are used to mix and apply thin-set and adhesives, and for material cleanup.


Number Dimensions UPC Code

04201 5"x 2" (127 x 50 mm) 0-93994-04201-9

04202 5" x 1-1/2" (127 x 38 mm) 0-93994-04202-6

04203 6" x 2" (152 x 50 mm) 0-93994-04203-3

04204 8" x 2" (203 x 50 mm) 0-93994-04204-0


WOODGRIP MARGIN TROWELFeaturesThe WoodGrip Margin Trowels are built for professional use. They feature a comfortable wood handle that is attached to a hardened steel blade. These trowels are used to mix and apply thin-set and adhesives, and for material cleanup.

Number Dimensions UPC Code

04209 5" x 2" (127 x 50 mm) 0-93994-04209-5

04210 5-1/2" x 2" (140 x 50 mm) 0-93994-04210-1

04211 6" x 2" (152 x 50 mm) 0-93994-04211-8

04212 8" x 2" (203 x 50 mm) 0-93994-04212-5


“DIY” MARGIN TROWELFeaturesThe “DIY” Margin Trowel is a tough, economical trowel for do-it-yourself projects. It is used to spread setting materials in hard-to-reach areas for all ceramic tile, marble and stone installations. The trowel blade measures 5" x 2" (127 x 50 mm).

Number UPC Code

04205 0-93994-04205-7


CEMENT FINISHING TROWELFeaturesThe Cement Finishing Trowel is built for the professional. It features a comfortable, hardwood handle attached to a flexible spring steel blade with a die-cast aluminum shank. This trowel is recommended for general finishing of surface materials. The trowel blade measures 4-5/8" x 11" (117 x 279 mm).

Number UPC Code

04200 0-93994-04200-2


Installation Tools4

www.mapei.com

“DIY” 13" TWO-BAR TILE CUTTERFeaturesThe “DIY” 13" (330 mm) Two-Bar Tile Cutter is designed for the do-it-yourself trade. It is equipped with a sturdy die-cast aluminum base, dual chrome-plated steel rails and an adjustable measuring gauge, and includes a replaceable 7/8" (22 mm) carbide cutting wheel.

Tile-Cutting Specifications: 14" (355 mm) Straight11" x 11" (279 x 279 mm) Diagonally

Number UPC Code

04293 0-93994-04293-4


“DIY” 12" TWO-BAR TILE CUTTERFeaturesThe “DIY” 12" (304 mm) Two-Bar Tile Cutter is designed for the do-it-yourself trade. It is equipped with dual chrome-plated rails, a sturdy metal base and includes a 1/2" (12 mm) replaceable carbide cutting wheel.


Number UPC Code

04294 0-93994-04294-1


1/2" REPLACEMENT CUTTER WHEELFeaturesThe 1/2" (12 mm) Replacement Cutter Wheel is for use with the MAPEI 12" (304 mm) DIY Two-Bar Tile Cutter.

Number UPC Code

04353 0-93994-04353-5

Packaging Specs: 12 per box

Tile-Cutting Tools and Accessories 5


16" TWO-BAR TILE CUTTERFeaturesThe 16" (406 mm) Two-Bar Tile Cutter is designed for professional, heavy-duty use.It features sealed bearings on two solid round, chrome-plated slide bars, a sturdy die-cast aluminum body, rubber padded breakers, a heavy-duty handle, an adjustable measuring gauge and high-density rubber pads. This tile cutter includes a replaceable 7/8" (22 mm) carbide cutting wheel (Product No. 04354).

Tile-Cutting Specifications: 17" (431 mm) Straight 12" x 12" (304 x 304 mm) Diagonally

Number UPC Code

04290 0-93994-04290-3


7/8" REPLACEMENT CUTTER WHEELFeaturesThe 7/8" (22 mm) Replacement Cutter Wheel is for use with all MAPEI Two-Bar Tile Cutters that require the 7/8" (22 mm) wheel.

Number UPC Code

04354 0-93994-04354-2

Packaging Specs: 12 per box



Number UPC Code

04291 093994-04291-0



Tile-Cutting Specifications: 25.5" (647 mm) Straight18" x 18" (457 x 457 mm) Diagonally

Number UPC Code

04292 0-93994-04292-7


www.mapei.com

Installation Tools6


RUBBING STONE FeaturesThe White Rubbing Stone is constructed of the finest material. It will not mark tile while smoothing rough edges on freshly cut tile. This rubbing stone measures: 8" x 2" x 1" (203 x 50 x 25 mm).

Number UPC Code

04355 0-93994-04355-9


BACKERBOARD CUTTERFeaturesThe Backerboard Cutter is built for heavy-duty use. It features all-steel construction with chrome plating. This cutting tool is equipped with a tubular, ribbed steel handle and dual carbide tips for easy scoring. This tool scores and cuts backerboard as well as all types of underlayment.

Number UPC Code

04295-099 0-93994-04295-8


1-3/8" CARBIDE HOLE SAWFeaturesThe 1-3/8" (34 mm) Carbide Hole Saw is designed for heavy-duty, professional use. It is equipped with a heavily coated carbide grit edge on a one-piece mandrel with a 1/4" (6 mm) carbide pilot drill. This general-purpose hole saw is designed for drilling all varieties of soft ceramic tiles and underlayment board.

Number UPC Code

04390 0-93994-04390-0


1-3/8" DIAMOND HOLE SAW FeaturesThe 1-3/8" (34 mm) Diamond Hole Saw is designed for heavy-duty professional use. It is equipped with multiple diamond segments on a one-piece mandrel with a 1/4" (6 mm) carbide pilot drill. The Diamond Hole Saw is designed for drilling hard ceramic tiles, marble, granite and stone.

Number UPC Code

04391 0-93994-04391-7


10" ROD SAW FeaturesThe carbide-embedded 10" (254 mm) Rod Saw is for use with standard hacksaw frames for cutting irregular shapes in tile, marble, glass and metals.

Number UPC Code

04392 0-93994-04392-4


6" ROD SAWFeaturesThe carbide-embedded 6" (152 mm) Rod Saw is for use with the 6" (152 mm) carbide Coping Saw for cutting irregular shapes in tile, marble, glass and metals.

Number UPC Code

04399 0-93994-04399-3


12" UNDERCUT SAW FeaturesThe 12" (304 mm) Undercut Saw includes a heavy-duty, trapezoid-shaped, replaceable carbon steel blade, attached to a removable lacquered wood handle. This saw is designed to cut moldings and door jambs, allowing tile to fit under for a clean, finished look. This also eliminates miter cuts on the tile.

Number UPC Code

04393 0-93994-04393-1


COPING SAWFeaturesThe 6" (152 mm) carbide Coping Saw was designed for professional use. It features steel frame construction teamed with the comfortable ProGrip-style handle. Also included is a 6" (152 mm) carbide-embedded rod saw blade. The Coping Saw provides a cutting depth of 6" (152 mm) for hard-to-reach angles and for cutting circles in various types of masonry and tile.

Number UPC Code

04397 0-93994-04397-9


7

www.mapei.com

16" LEVELFeaturesThe 16" (406 mm) Level is constructed of extruded aluminum frames. It features two unbreakable, solid-core acrylic vials and is finished with an electrostatic powder coating.

Number UPC Code

04437 0-93994-04437-2


Levels, Measuring Tools and Accessories

12" TORPEDO LEVEL FeaturesThe 12" (304 mm) Torpedo Level is constructed of die-cast aluminum. It features two unbreakable, solid-core acrylic vials and is finished with an electrostatic powder coating.

Number UPC Code

04436 0-93994-04436-5

Packaging Specs: 6 per case Number Size Quantity UPC Code

04438 24" (608 mm) 4 per case 0-93994-04438-9

04439 48" (122 cm) 4 per case 0-93994-04439-6

04440 72" (182 cm) 1 per case 0-93994-04440-2

24", 48" and 72" LEVELSFeaturesThe 24" (609 mm), 48" (122 cm) and 72" (182 cm) Levels are constructed of extruded aluminum frames. All levels feature two unbreakable, solid-core acrylic vials and are finished with an electrostatic powder coating. These levels are equipped with plastic end caps and hand holes for easy handling.



PRO-STYLE GROUT SAW FeaturesThis Pro-Style Grout Saw is constructed of sturdy, molded plastic with a soft grip handle and equipped with replaceable carbide grit blades. The handle has been ergonomically designed for comfort and ease of use while removing old grout from joints. Multiple blades may be attached for larger grout joints.

Number UPC Code

04395 0-93994-04395-5


GROUT SAW BLADESFeaturesThe Grout Saw Blade is constructed with a carbide grit edge. These replacement blades are packaged two blades per pack.

Number UPC Code

04396 0-93994-04396-2

Packaging Specs: 12 packs per case

ECONO GROUT SAWFeaturesThe economical Econo Grout Saw is built with a sturdy, molded plastic handle and comes with replaceable carbide grit blades. The handle has been designed for comfort and ease of use while removing old grout from joints.

Number UPC Code

04394 0-93994-04394-8


CARBIDE TRIANGLE GROUT SAW FeaturesThe Carbide Triangle Grout Saw (Grout GetterTM) is built with a hard plastic handle attached to a steel rod with a threaded end for the triangular carbide cutting insert. The easy-to-use grout saw is designed for removing old sanded or unsanded grout from joints or knocking down excess thin-set before grouting.

Number UPC Code

04398 0-93994-04398-6


CARBIDE TILE FILEFeaturesCarbide file used to sand and smooth out rough edges on ceramic tile, marble and stone. Flat and rounded sides used for straight and also contoured shapes.

Number UPC Code

04400 0-93994-04400-6


www.mapei.com

Installation Tools8

Levels, Measuring Tools and Accessories / Grout Application Tools

“L” ANGLE SCREED SET FeaturesThe 6-piece “L” Angle-style tile Screed Set is constructed of extruded high-strength aluminum. The various sized right-angle screeds included in this set provide accurate screeding for any job.Set includes sizes: 18" (45 cm), 24" (60 cm),30" (76 cm), 36" (91 cm),54" (137 cm) and 72" (182 cm)

Number UPC Code

04377 0-93994-04377-1


BOX-STYLE SCREED SETFeaturesThe 6-piece Box-Style Tile Screed Set is constructed of extruded 3/4" x 4" (19 x 101 mm) double-hollow, high-strength aluminum. Also included is an easy-carry handle and plastic end caps. The various sizes included in this set provide accurate screeding for bathtubs, shower stalls and drainboards.Set includes sizes: 18" (45 cm), 24" (60 cm),30" (76 cm), 36" (91 cm),54" (137 cm) and 72" (182 cm)

Number UPC Code

04376 0-93994-04376-4


WEDGE SPACERSFeaturesConstructed of soft vinyl material, Wedge Spacers are designed for spacing tile, marble and stone.

Number UPC Code

04283 0-93994-04283-5


Number Size Quantity UPC Code

04266 1/16" (1 mm) 300 0-93994-04266-8

04267 1/8" (3 mm) 200 0-93994-04267-5

04268 3/16" (5 mm) 150 0-93994-04268-2

04269 1/4" (6 mm) 100 0-93994-04269-9

04270 3/8" (9 mm) 50 0-93994-04270-5

04271 1/2" (12 mm) 35 0-93994-04271-2

Packaging Specs: 36 bags per case

TILE SPACERSFeaturesTile Spacers are constructed of a soft vinyl, flexible material with consistent edges. They are designed to keep accurate joints in ceramic tile, marble and stone applications. These spacers are conveniently packaged in bags for smaller jobs or repair work.

SPACER PULLERFeaturesThis soft-grip Spacer Puller was created to remove spacers before grouting with minimal effort required by the user. Its simple fulcrum design gently lifts spacers out while the rubber bumper minimizes possible damage to the surrounding tile, marble or stone. May also be used to clean out excess thinset prior to grouting.

Number UPC Code

04285 0 93994 04285 9



04277 1/16" (1 mm) 3,000 0-93994-04277-4

04278 1/8" (3 mm) 1,600 0-93994-04278-1

04279 3/16" (5 mm) 850 0-93994-04279-8

04280 1/4" (6 mm) 550 0-93994-04280-4

04281 3/8" (9 mm) 300 0-93994-04281-1

04282 1/2" (12 mm) 185 0-93994-04282-8

Packaging Specs: 8 boxes per case

TILE SPACERSFeaturesTile Spacers are constructed of a soft vinyl, flexible material with consistent edges. They are designed to keep accurate joints in ceramic tile, marble and stone applications. These spacers are conveniently packaged in a resealable box for contractor use.

SPACER POPPERFeaturesThe Spacer Popper features a sturdy wood handle with a retractable tip and rubber-edge bumper. The retractable point and bumper pick spacers from the tile joint and pop them off all in one motion.

Number UPC Code

04284 0-93994-04284-2


LEAVE-IN SPACERSFeaturesThese cement tile spacers are made from actual MAPEI thin-set, They are designed to be left in the joint permanently and bond with the thin-set or mastic.


04287 3/16" (5 mm) 300 0-93994-04287-3

Packaging Specs: 12 boxes per case

www.mapei.com

Grouting

Grout Application Tools

ALUMINUM GROUT FLOATFeaturesThe Aluminum Grout Float is designed for durability with a one-piece molded black plastic handle, aluminum face and open-cell rubber with a gum rubber bottom. This Grout Float is generally used for grouting countertops, floors and walls. The float bottom measures 4" x 9" (101 x 228 mm).

Number UPC Code

04306 0-93994-04306-1


ALUMINUM OFFSET GROUT FLOATFeaturesThe Aluminum Offset Grout Float is designed for durability with a one-piece molded black plastic handle, aluminum face and open-cell rubber with a gum-rubber bottom. The Offset Grout Float is designed for grouting hard-to-reach areas under bathroom and kitchen counters. The float bottom is tapered, measuring 3" x 12" (76 x 304 mm).

Number UPC Code

04308 0-93994-04308-5


PLASTIC OFFSET GROUT FLOAT FeaturesThe Plastic Offset Grout Float is constructed of a one-piece molded black plastic handle attached to a nonmarring, plastic float back that is bonded to an open-cell rubber layer with a gum-rubber bottom. This float is designed for grouting hard-to-reach areas under bathroom and kitchen counters. The float bottom is tapered, measuring 3" x 12" (76 x 304 mm).

Number UPC Code

04309 0-93994-04309-2


PLASTIC GROUT FLOATFeaturesThe Plastic Grout Float is constructed of a one-piece molded black plastic handle attached to a nonmarring, plastic float back that is bonded to an open-cell rubber layer with a gum-rubber bottom. This float is for general grouting purposes. The bottom measures 4" x 9" (101 x 228 mm).

Number UPC Code

04307 0-93994-04307-8


EPOXY GROUT FLOATFeaturesThe Epoxy Grout Float is designed for the professional, with a one-piece, molded plastic handle and back bonded to a firm, blue, molded rubber bottom. This heavy-duty epoxy float is designed for harder-to-spread epoxy grouts. The bottom measures 3-3/4" x 10" (95 x 254 mm).

Number UPC Code

04310 0-93994-04310-8


MARGIN GROUT FLOAT FeaturesThe Margin Grout Float features a sturdy wood handle, aluminum face and open-cell rubber with a gum-rubber bottom. The narrow bottom allows the grouting of hard-to-reach areas.

Number UPC Code

04304 0-93994-04304-7

Packaging Specs: 12 pr case

“DIY” GROUT FLOATFeaturesThe “DIY” Grout Float is constructed of a one-piece, black plastic molded handle attached to a nonmarring, plastic float back bonded to an open-cell rubber layer. This float is for the “do-it-yourselfer” or homeowner for general grouting purposes. The bottom measures 3" x 9" (76 x 228 mm).

Number UPC Code

04305 0-93994-04305-4


MOLDED RUBBER GROUT FLOATFeaturesThe Molded Rubber Grout Float is constructed of a one-piece, black plastic molded handle attached to a nonmarring, flexible plastic float back that is bonded to a molded foam-rubber bottom. This float is for general grouting purposes. The bottom measures 4" x 9" (101 x 228 mm).

Number UPC Code

04311 0-93994-04311-5


GROUT BAGFeaturesThis reusable Grout Bag is constructed of sturdy cotton and vinyl, and features a built-in vinyl tip. It is designed for use with tile grout, masonry and concrete repair products.

Number UPC Code

04312 0-93994-043 12-2


9

www.mapei.com

Installation Tools10

Mixing Tools

DOUBLE BOX MIXERFeaturesThe Double Box Mixer is constructed of a 3/8" (9 mm) hexagonal, nonslip shaft with 2 welded box frames. This mixer is zinc-plated to resist wear and corrosion from alkali and harsh chemicals. The double-box design delivers excellent results while demanding minimal effort and wear to the drill motor. A minimum of air is injected into the dry or wet-mix thin-set, grout, plaster, stucco, mortar, concrete and most concrete restoration materials. For use at low rpm with most 1/2" (12 mm) drill motors.

Number UPC Code

04425 0-93994-04425-9


DOUBLE PINWHEEL MIXERFeaturesThe Double Pinwheel Mixer is constructed of a 3/8" (9 mm) hexagonal, nonslip shaft with 2 welded, pinwheel-like blades. This mixer is zinc-plated to resist wear and corrosion from alkali and harsh chemicals. The double-blade construction folds material in all directions. This no-lumping mix is the desired consistency for thin-set, grout, plaster, stucco, mortar and most concrete. For use at low rpm with most 1/2" (12 mm) drill motors.

Number UPC Code

04424 0-93994-04424-2


ANGLED CROSS BLADE MIXERFeaturesThe Angled Cross Blade Mixer is constructed of a 3/8" (9 mm) hexagonal, nonslip shaft with 2 welded angled blades. This mixer is zinc-plated to resist wear and corrosion from alkali and harsh chemicals. The flat-blade design mixes flat on the bottom, creating a figure-eight circulating motion that provides a desirable consistency for thin-set, grout, plaster, stucco, mortar and most concrete. For use at low rpm with most 1/2" (12 mm) drill motors.

Number UPC Code

04423 0-93994-04423-5


SINGLE BOX MIXERFeaturesThe Single Box Mixer is constructed of a 3/8" (9 mm) hexagonal, nonslip shaft with one welded steel box frame. This mixer is zinc-plated to resist wear and corrosion from alkali and harsh chemicals. The single-box design is effective at low speeds and mixes with minimal effort to the drill motor. It will mix everything from drywall mud, acoustic and setting materials, and self-leveling products to paint. For use at low rpm with most 1/2" (12 mm) drill motors.

Number UPC Code

04422 0-93994-04422-8


www.mapei.com

Preparation Tools 11


4" WALL SHAVER w/ 12" HANDLEFeaturesThe 4" (101 mm) Wall Shaver is designed for heavy-duty shaving and cleanup jobs. This tool is built with a die-cast head, tubular 12" (304 mm) handle with a rugged, yet comfortable rubber-grip handle and includes a sharp, replaceable 4" (101 mm) blade that is securely attached by three mounting screws. The Wall Shaver is generally used for cleaning up mastic and grout, removing wallpaper and removing paint from glass.

Number UPC Code

04332 0-93994-04332-0


4" WALL SHAVER w/ 18" HANDLEFeaturesThe 4" (101 mm) Wall Shaver is designed for heavy-duty shaving and cleanup jobs. This tool is built with a die-cast head, tubular 18" (457 mm) handle with a rugged, yet comfortable rubber-grip handle and includes a sharp, replaceable 4" (101 mm) blade that is securely attached by three mounting screws. The Wall Shaver is generally used for cleaning up mastic and grout, removing wallpaper and removing paint from glass.

Number UPC Code

04333 093994-04333-7


4" REPLACEMENT SHAVER BLADES FeaturesThe 4" (101 mm) Replacement Wall Shaver Blades attach securely with three mounting screws to the 4" (101 mm) Wall Shaver with 12" (304 mm) and 18" (457 mm) handle. They are available in a 5 or 10 pack.

Number Quantity UPC Code

04347 5 pack 0-93994-04347-4

04350 100 pack 0-93994-04350-4


8" EXTENSION HANDLE SCRAPERFeaturesThe 8" (203 mm) Extension Handle Scraper is designed for heavy-duty scraping and cleanup jobs. This tool is built with a die-cast aluminum head welded to an all-steel extension handle that extends from 3’ to 6’ (91 cm to 182 cm), fitted with a rugged, comfortable rubber grip handle. Also included is a sharp 8" (203 mm) replaceable scraper blade that is securely attached by four mounting screws. This scraper is designed to remove wallpaper, mastic, thin-set, grout and paint from ceramic tile, marble, stone and glass.

Number UPC Code

04334 0-93994-04334-4


8" HEAVY-DUTY REPLACEMENT SCRAPER BLADEFeaturesThe 8" (203 mm) Replacement Scraper Blades attach securely with four mounting screws to the 8" (203 mm) Extension Handle Scraper. They are available only in a 3 pack.

Number UPC Code

04349 0-93994-04349-8


www.mapei.com

Preparation Tools12


14" REPLACEMENT SCRAPER BLADEFeaturesThe 14" (355 mm) Replacement Scraper Blade is constructed of sturdy trowel steel. It attaches securely to the Floor Scraper with four mounting bolts.

Number UPC Code

04337 0-93994-04337-5


FLOOR SCRAPER w/ 14" BLADEFeaturesThe 14" (355 mm) Blade Floor Scraper is designed for heavy-duty floor scraping and cleanup jobs. This all-steel, welded floor scraper features a tubular steel handle. Also included is a sturdy, but flexible 14" (355 mm) trowel steel replaceable blade that is securely attached by four mounting bolts. This scraper is designed for the removal of tile, concrete, plaster, glue, mastic, thin-set and linoleum, and for general cleanup.

Number UPC Code

04335 0-93994-04335-1


8" HEAVY-DUTY FLOOR SCRAPERFeaturesThe Heavy-Duty Floor Scraper is designed for demanding floor scraping and cleanup jobs. The all-steel welded scraper features a steel “T” handle designed for maximum leverage. Also included is a sturdy 8" (203 mm) steel blade that can be resharpened for long life. This scraper is designed for the most demanding floor removal jobs, including lifting tile and brick as well as scraping concrete, plaster, glue, mastic, thin-set and linoleum.

Number UPC Code

04336 0-93994-04336-8


8" REPLACEMENT SCRAPER BLADEFeaturesThe 8" (203 mm) Replacement Scraper Blade is constructed of heavy-duty steel that can be resharpened for long life. It attaches securely to the 8" Heavy-Duty Floor Scraper with two mounting bolts.

Number UPC Code

04338 0-93994-04338-2


www.mapei.com

Preparation Tools 13


MEASURING TAPE FeaturesThe 30' (9,1 m) Measuring Tape is brightly colored for improved visibility. It is constructed of a durable, plastic case and a bright yellow, dual graduation blade for easy reading. Also included is a blade lock feature and a belt clip. This sturdy measuring tape is for all-purpose use.

CAUTION TAPEFeaturesThe 3" (76 mm) Caution Tape is constructed of durable vinyl. It features a bright “safety” yellow color for high visibility and effective warning application. Each roll measures 3" x 300'(76 mm x 91 m).

Number UPC Code

04409 0-93994-04409-9


Number UPC Code

04416 0-93994-04416-7


TILE MARKERSFeaturesAn assortment of 6 colored Tile Markers per clamshell. These grease pencils can be sharpened without additional tools and will easily mark any slick surface, such as ceramic tile, marble, granite, porcelain and glass. The marks will remain on the surface when it is cut with a wet saw.

Number UPC Code

04417 0-93994-04417-4


BACKERBOARD JOINT TAPEFeaturesThe Backerboard Joint Tape is an alkali-resistant, joint mesh tape. It features a special adhesive that provides fast and easy application. This joint tape is used to cover seams, joints, cracks and holes in all types of underlayment board. Each convenient roll is 2" (50 mm) wide and 50' (15,2 m) long.

Number UPC Code

04412 0-93994-04412-9


www.mapei.com

SOFT-CAP KNEEPADSFeaturesThe Soft-Cap Kneepads are the popular skateboard-style pads that provide protection with maximum comfort. They are constructed of a hard, plastic face with a flexible, rubber molded outer shell and a 1/2" (50 mm)-thick soft, padded foam inner pad. Also featured are nylon reinforcement and elastic straps with Velcro for quick connection.

ACCORDION-STYLE KNEEPADSFeaturesThe Accordion-Style Kneepads provide the best protection with maximum comfort on even the hardest of surfaces. They are constructed of a flexible-rubber, nonskid outer shell with a soft, high-density foam inner pad and all-rubber, easy-to-adjust straps. The “accordion” outer shell is designed to flex with natural movement.

“DIY” KNEEPADSFeaturesThe “DIY” Kneepads are a low-cost alternative for knee protection. They are constructed of a super-lightweight foam with 1" (25 mm) nylon-Velcro straps. These kneepads are ideal for the do-it-yourselfer or the homeowner.

MAPEI SOFTGEL KNEEPADSFeaturesThe advanced technology of the MAPEI Softgel Kneepads ensures maximum comfort and endurance. The softgel core allows for a soft feel and even weight distribution while the neoprene liner keeps knees cool, dry and comfortable during work. Dual straps provide the ultimate protection and comfort.


Installation Accessories

Number UPC Code

04323 0-93994-04323-8


Number UPC Code

04324 0-93994-04324-5


Number UPC Code

04326 0-93994-04326-9


Number UPC Code

04328 0-93994-04328-3

Packaging Specs: 6 pair

www.mapei.com

“DIY” VINYL UTILITY GLOVESFeaturesThe “DIY” Vinyl Utility Gloves are designed to protect the skin from damaging substances and materials. Constructed of a lightweight, durable pre-powdered vinyl, they can be worn on either hand and can be reused many times over.

MAPEI WORK GLOVESFeaturesThese all-around work gloves have many uses beyond those of mechanics, tile setters, handymen and sports enthusiasts. Made from synthetic leather with stretch-spandex, double palm and Velcro closure, the lightweight gloves are designed to give excellent durability with maximum comfort and protection.

TILE SETTER’S GROUT GLOVESFeaturesThe orange Tile Setter’s Grout Gloves provide maximum comfort and protection. They are constructed of sturdy rubber and resistant to most caustic chemicals, paints and sealers. These gloves are designed for setting tile as well as general industrial and household uses.

Installation Tools 15

Grout Accessories

Number UPC Code

04384 0-93994-04384-9

Packaging Specs: 5 pair per bag and 36 bags per case

Number Size UPC Code

04382 MD 0-93994-04382-5

04381 LG 0-93994-04381-5

04383 XL 0-93994-04383-2

Packaging Specs: 12 pair per case

Number Size UPC Code

04487 MD 0-93994-04487-0

04488 LG 0-93994-04488-7

04489 XL 0-93994-04489-0

Packaging Specs: 12 pair per box

www.mapei.com


BRUSH TIP SEALER APPLICATORFeaturesThe Brush Tip Sealer Applicator is a sturdy plastic bottle with an adjustable valve top brush. This applicator is designed to apply sealants or colorants to grout joints on floors, walls and counters. The brush tip provides an accurate application to the grout line only.

Number UPC Code

04429 0-93994-04429-9


CHEESECLOTHFeaturesThe Cheesecloth is made of 24/20-weave, unbleached cotton. It is available in a convenient 5-yard (4,5 m) package. Cheesecloth is excellent for polishing the tile surface after grouting.

Number UPC Code

04369 0-93994-04369-6


GROUT SEALER APPLICATOR WANDFeaturesThe Grout Sealer Applicator Wand is all-plastic and has a 12-oz. sealer capacity. It also has an adjustable flow valve and two sizes of wheels to cover most sizes of grout joints. This stand-up applicator can be reused again and again.

Number Packaging UPC Code

04428 25 per case 0-93994-04428-0

04428B 6 per box 0-93994-04428-0

SCRUB BUG PAD HOLDERFeaturesThe Scrub Bug Pad Holder has a comfortable plastic handle with plastic backing and Velcro scrub pad holders. The holder is for use with the blue or white scrub pad. With a pad attached, the holder is designed to clean epoxy and grout residue from floors and walls in ceramic tile, marble and stone applications.

Number UPC Code

04367 0-93994-04367-2


SCRUB PADSFeaturesThe Scrub Pads are designed to clean epoxy and grout residue from floors and walls in ceramic tile, marble and stone applications. The blue Scrub Pad is built for more aggressive cleaning. Both scrub pads measure 5" x 9" (127 x 228 mm).

Number Color UPC Code

04368 White 0-93994-04368-9

04366 Blue 0-93994-04366-5


PLASTIC GROUT BRUSH FeaturesThe Plastic Grout Brush combines a sturdy plastic handle with firm, built-in bristles. It is designed for cleaning or removing loose particles from grout joints.

Number UPC Code

04411 0-93994-04411-2


PLASTIC BUCKETFeaturesThis 5-gallon (18,9 L) Plastic Bucket is constructed of heavy-duty plastic with a steel handle and a plastic grip for easy pouring. This bucket is perfect for mixing thin-set, mortar and grout. Dried mortar is easy to remove after material sets.

Number UPC Code

04370 0-93994-04370-2

Packaging Specs: 12 per bundle

Grout Accessories

www.mapei.com

Installation Tools 17

Tile Installation Kits

HANDYMAN TILE TOOL BUCKETFeaturesThe Handyman Tile Tool Bucket is a sturdy 3-1/2-gallon (13,2 L) bucket containing all the tools needed to install ceramic tile on walls or countertops. The kit contains a notched trowel, tile-cutting pliers, tile spacers, a grout sponge, a grout float, a margin trowel and vinyl gloves.

Number UPC Code

04510 0-93994-04510-2

Packaging Specs: 48 per pallet

CONTRACTOR TILE TOOL BUCKETFeaturesThe Contractor Tile Tool Bucket is a full-size, 5-gallon (18,9 L)bucket with all the tools needed for a handyman or contractor to install ceramic tile on floors or walls. The kit contains a full-size notched trowel, a large grout sponge, pro grout gloves, offset tile nippers, a gum-rubber grout float and a pro margin trowel.

Number UPC Code

04520 0-93994-04520-1

Packaging Specs: 36 per pallet

www.mapei.com


VACUUM SUCTION CUPFeaturesThe Vacuum Suction Cup is used to install large tile and marble sections fast and accurately.

Number UPC Code

04418 0-93994-04418-1


FLAGGED TIP COUNTER BRUSHFeaturesThe Flagged Tip Counter Brush is constructed of a solid, hardwood block with staple-set, nylon flagged bristles and a stainless steel scraper attached to the front. This brush is popular for dusting and brushing away grout. The scraper allows the removal of excess thin-set or grout.

Number UPC Code

04410 0-93994-04410-5


Grout Application Tools

COMBO GROUT SCRUBBER SPONGEFeaturesThe Combo Grout Scrubber Sponge combines a standard grout sponge bottom with a coarse plastic foam scrub pad on the top. This allows basic sponge use and light surface cleaning, all with one tool. This sponge is also excellent for general cleaning of tile, marble, stone, tile and porcelain in pools, showers, baths, etc. This combo sponge measures 6-1/2" x 4-1/2" x 2-1/8" (165 x 114 x 53 mm).

Number UPC Code

04363 0-93994-04363-4


SQUARE-EDGE CELLULOSE SPONGEFeaturesThe Square-Edge Cellulose Sponge is made with square edges for hard-to-reach corners. It is resistant to chemicals and is built for long life. This sponge measures 6-1/2" x 4-1/2" x 2-1/8" (165 x 114 x 53 mm).

Number UPC Code

04365 0-93994-04365-8


LARGE GROUT SPONGEFeaturesThe Large Grout Sponge provides incredible absorption, is easy to rinse and will not load up with such materials as sand, grout and cement. This sponge is the industry standard for tile-setting jobs and for overall general uses. This sponge measures 7-1/2" x 5-1/2" x 2-1/8" (190 x 139 x 53 mm).

Number Quantity UPC Code

04362 102/case 0-93994-04362-7

04361 400/bale 0-93994-04361-0

www.mapei.com

AIR COMPRESSER 2.5 HPFeaturesThis 2.5 HP, 115 V, 60 Hz air compresser features a 4-gallon (15,1 L) twin tank with one regulator, one coupler, two gauges and a direct-drive compressor pump. It comes lubricated with oil for long life, and offers thermal overload protection for safety and reliability. (7.75 CFM at 40 psi; 6.6 CFM at 90 psi; maximum pressure at 115 psi)

Number UPC Code

04470 0-93994-04470-9

Packaging Specs: 1 each

RUBBER AIR HOSEFeaturesThe Rubber Air Hose has a standard 1⁄4" (6 mm)air fitting with 50 feet (15,2 m) of heavy-duty rubber hose.

Number UPC Code

04464 0-93994-04464-8


Preparation Tools

Mapelath™ Installation System

MAPELATH™ AIR STAPLERFeaturesThe Mapelath Air Stapler is an air-operated staple gun designed to apply Mapelath to all wood substrates. Along with heavy-duty construction, the staple gun features a bottom-feed magazine for easy loading and a rubber comfort grip for reduced hand fatigue. The staple gun’s industrial-grade quality is ideal for high-volume applications.

Number UPC Code

04460 0-93994-04460-0

Packaging Specs: 1 each

MAPELATH™ STAPLESFeaturesThese 1/2"-crown (12 mm), 9/16"-depth (14 mm)divergent point staples are specifically designed to apply Mapelath to all sound wood substrates. The industrial-grade, galvanized staples are designed to suit any application, and to deliver maximum holding power and long-lasting performance.The staples come 5,000 per box.

Number UPC Code

04462 0-93994-04462-4

Packaging Specs: 5000 staples per box, 20 boxes per case

19

www.mapei.com

NotesNumber Product Notes

20

www.mapei.com

INNOVATIVETile & Stone Installation Systems 2008

C o n t e n t s2 - 5 Introduction

6 - 7 Quick-Reference Chart

8 - 10 Surface Preparation Products

11 - 12 Membrane Systems and Waterproofing Products

12 - 17 Mortars

17 Mastics

18 - 19 Grouts

19 Caulks, and Finishing and Care Product

C o n t e n t s2 - 3 Introduction 10 - 11 Screeds/Toppings

4 - 5 Quick-Reference Chart 11 - 13 Concrete Repair Mortars

6 Self-Leveling Underlayments 14 Construction Grouts

7 Self-Leveling Toppings 15 Exterior Refinishing

7 - 8 Primers for Self-Leveling 16 - 17 Waterproofing Products

8 Moisture-Reduction Barrier 18 Bonding Agents and Corrosion Protection

9 - 10 Patching and Skim-Coating Compounds 19 Additives/Accessories

INNOVATIVEConcrete Restoration Systems 2008

C o n t e n t s2 - 3 Introduction

4 - 5 Adhesive Selection Chart

6 - 9 Surface Preparation Products

10 - 15 Floor-Covering Adhesives

15 Mastics

INNOVATIVEFloor Covering Installation Systems 2008

For products focusing on tile and stone installation, ask

your MAPEI sales representative for a copy of our

Tile & Stone Installation Systems brochure.

For products focusing on concrete repair and

restoration, ask your MAPEI sales representative for a

copy of our Concrete Restoration Systems brochure.

For products focusing on resilient flooring and carpet

installation, ask your MAPEI sales representative for a

copy of our Floor Covering Installation Systems brochure.

www.mapei.com

For more information on the complete line of MAPEI products,call 1-800-42-MAPEI (1-800-426-2734) or visit our Website.

HEADQUARTERS OF THE AMERICAS1144 East Newport Center Drive

Deerfield Beach, FL 33442Phone: 1-888-US-MAPEI • Fax: (954) 246-8800

CUSTOMER SERVICE1-800-42-MAPEI (1-800-426-2734)

TECHNICAL SERVICES1-800-992-6273 (U.S. and Puerto Rico)

1-800-361-9309 (Canada)

UNITED STATES

Arizona401 South Smith RoadTempe, AZ 85281-2925Phone: (480) 968-7722 Fax: (480) 966-9659

California5415 North Industrial ParkwaySan Bernardino, CA 92407Phone: (909) 475-4100 Fax: (909) 475-4101

Florida1851 N.W. 22nd StreetFt. Lauderdale, FL 33311-2940Phone: 1-888-FL-MAPEI

(1-888-356-2734) Fax: (954) 485-9081

Illinois530 Industrial DriveWest Chicago, IL 60185-1828Phone: (630) 293-5800 Fax: (630) 293-5079

New JerseyP.O. Box 105,Off Whitehead Ave.South River, NJ 08882Phone: (732) 254-8001 Fax: (732) 254-9103

Texas1501 Wall StreetGarland, TX 75041-4046Phone: (972) 271-9500 Fax: (972) 271-9464

Virginia300 Nelms CircleFredericksburg, VA 22406Phone: (540) 310-0111 Fax: (540) 310-4887

CANADA

Quebec2900 avenue Francis-HughesLaval, QC H7L 3J5Phone: (450) 662-1212 Fax: (450) 662-0444

British Columbia7440 Vantage WayDelta, BC V4G 1H1Phone: (604) 940-0002 Fax: (604) 940-2572

Ontario2130 Williams ParkwayBrampton, ON L6S 5X7 Phone: (905) 799-6884 Fax: (905) 799-9870

ARGENTINA

MAPEI Argentina S.A.Rondeau 51, 1er PisoWilde, B1875DZABuenos Aires, Argentina Phone: (5411) 4207-0009 Fax: (5411) 4217-1088

PUERTO RICO

Road 2 km 26.2 BO. EspinosaDorado, Puerto Rico 00646Phone: (787) 270-4162 Fax: (787) 270-4135

VENEZUELA

Calle Orinoco Torre D&D Lc 11-12 PBUrbanización Las MercedesCaracas, Venezuela 1060Phone: (58-212) 991-1797 Fax: (58-212) 991-9423

TM

PR4365 Tools08© 2008 MAPEI Corporation

All Rights Reserved.Printed in the USA

tool solutions - save on top-quality glass tiles & glass gems

Documents