topsides and floaters - norwep · pg flow solutions (ing. per gjerdrum as) ... process equipment...
TRANSCRIPT
Topsides and FloatersServices, equipment and systems for
November 2015
Contents
Frontpage main: Source: Aker Solutions. Frontpage below: left: Source: ABB as, middle: Source: Marine Cybernetics, right: Source: ENWA Water Technology AS.
ABB AS 8Aibel as 9Aker Solutions 10Alfsen og Gunderson as 11Aquamarine Subsea AS 12Autronica Fire and Security AS 13Axess as 14Bilfinger Industrier Norge AS 15Bostek 16BVS AS 17Callenberg Technology Group 18CMA Contiki as 19ComputIT 20Cranemaster (Ernst-B. Johansen AS) 21CRE8 systems as 22Delta-p Pumpe og Kompressorsystemer as 23DNV GL 24Draka Norsk Kabel 25Dwellop as 26Eldor AS 27Enhanced Drilling 28Enwa Water Technology AS 29Eureka Pumps AS 30Fjords Processing 31FMC Technologies 32FMC Technologies Multi Phase Meters 33Force Technology Norway as 34Framo AS 35Freudenberg Oil & Gas Technologies 36Gexcon as 37GLAMOX AS 38GMC HVAC AS 39Harding Safety AS 40Hernis Scan Systems as 41Hitec Products AS 42IKM Testing 43Imenco 44Jotne E&P 45
Jotun Performance Coatings 46K. Lund Offshore 47Kongsberg Maritime 48Lloyd’s Register Consulting 49LMG Marin 50Marine Aluminium 51Marine Cybernetics 52MHWirth 53Minox Technology 54Moss Maritime a.s 55MRC Solberg & Andersen 56Multiconsult 57Nature Oil & Gas AS 58Nexans 59NLI Solutions 60Novenco 61Oglaend System 62PALFINGER MARINE 63Petrolink as 64PG Flow Solutions (Ing. Per Gjerdrum AS) 65Pon Power as 66PREZIOSO Linjebygg AS 67Rapp Bomek 68REINERTSEN AS 69Rolls Royce Marine 70Scana Industrier 71Semco Maritime 72Sevan Marine ASA 73Siemens Oil & Gas and Marine 74Tamrotor Marine Compressors AS 75Technip Norge 76TESS as 77Thermtech 78Torgy Mek Industri AS 79Trelleborg Offshore Norway AS 80Wood Group Mustang Norway AS 81Wärtsilä Oil & Gas Systems AS 82
Introduction
Regional Director,Per Hagen
Norwegian based companies in the oil and gas sector have a well established reputation and a significant market share as providers of services, equipment and systems to topsides and substructures for fixed and floating production platforms and drilling rigs. In this catalogue we present the cluster of INTSOK partners that provide products and services towards topsides in general, as well as for the various types of floating support structures.
TOPSIDESGenerally topsides comprises of production systems, supporting systems and accom-modation for personnel. Its content is derived from the services it delivers in exploiting an oil and/or gas field. E.g. separate oil, gas and water, deliver power and other utilities or house personnel.
Its support structure; e.g. jacket, semisubmersible, or a floating monohull vessel, is designed to support the Topsides in the marine environment and in some cases provide storage of the produced liquids. In the early years of offshore developments, jackets were normally used to support the topsides. However for water depths exceeding 150-200 meters, floating solutions are superior to fixed installations.
FLOATING SUPPORT STRUCTURESFloating support structures have been deployed in a number of specific offshore services both to find and develop oil & gas fields. Examples are mobile drilling rigs, service vessels and oil production platforms. While the FPSO has been the preferred floating production solution in most of the world, other solutions have been applied in the US GoM, particularly Tension Leg Platforms (TLPs) and SPARs. The FPSO is the dominant type of floating production unit and constitutes for around 70% of the market in 2010. The FPSOs are particularly effective in remote and/or deepwater locations without a pipelines infrastructure. In harsh environments the risers are connected to the vessel, through a turret, which allows the vessel to weather-wane. Alternatively, in benign environments like West Africa the FPSO can be spread moored and risers connected to the vessel at the side.
The selection of the floating support structure depends on the following criteria:• Dry or wet trees• Storage requirement• Available pipeline infrastructure• Operator familiarity• Field life• Cost• Area/field development plan (hub, tie-backs etc)
3
Capability MatrixEn
gine
erin
g &
Tech
nica
l se
rvic
es
Topsides engineering
Marine engineering & mooring design
Technical & production servicesAdministration & IT services
Equi
pmen
t & s
yste
ms
supp
liers
Electric/automation/telecomCranes, lifting & mooringsProcess equipment
Rotating equipment
Safety equipment
Other mechanical equipment
Drill
ing Drilling systems
ABBAibe
lAke
r Solu
tions
Alfsen
og G
unde
rson
Aquam
arine
Sub
sea A
S
Autro
nica F
ire &
Sec
urity
Axess
Bilfing
er In
dust
rier N
orge
AS
BVS
AS
Boste
k
Callen
berg
Tech
nolog
y Gro
up
CMA C
ontik
iCom
putit
Crane
mas
ter
CRE8 sy
stem
s as
4
Engi
neer
ing
& Te
chni
cal
serv
ices
Topsides engineering
Marine engineering & mooring design
Technical & production servicesAdministration & IT services
Equi
pmen
t & s
yste
ms
supp
liers
Electric/automation/telecomCranes, lifting & mooringsProcess equipment
Rotating equipment
Safety equipment
Other mechanical equipment
Drill
ing Drilling systems
Crane
mas
ter
CRE8 sy
stem
s as
Delta-
pDNV G
LDra
ka N
orsk
Kab
el
Dwellop
Eldor
AS
Enha
nced
Drill
ing
Enwa W
ater
Tech
nolog
y
Eure
ka P
umps
AS
FMC Te
chno
logies
Fjord
s Pro
cess
ingFM
C Tech
nolog
ies M
ulti P
hase
Met
ers
FORCE T
echn
ology
Nor
way A
S
Fram
o AS
Freu
denb
erg O
il & G
as Te
chno
logies
Gexco
nGlam
oxGM
C HVA
C
Hernis
Sca
n Sys
tem
s
Hardin
g Saf
ety A
SHite
c Pro
duct
s AS
IKM
Test
ingIm
enco
Jotn
e E&P
5
Engi
neer
ing
& Te
chni
cal
serv
ices
Topsides engineering
Marine engineering & mooring designTechnical & production servicesAdministration & IT services
Equi
pmen
t & s
yste
ms
supp
liers
Electric/automation/telecomCranes, lifting & mooringsProcess equipment
Rotating equipment
Safety equipment
Other mechanical equipment
Drill
ing Drilling systems
Mar
ine C
yber
netic
s
MHW
irth (
form
er A
ker M
H)
Mino
x Tec
hnolo
gy
Mos
s Mar
itime
MRC S
olber
g & A
nder
sen
Mult
icons
ultNat
ure O
il & G
as
Nexan
sNLI
Solu
tions
K. Lun
d Offs
hore
Kong
sber
g Mar
itime
Lloyd
s Reg
ister
Con
sultin
g
LMG M
arin
Mar
ine A
lumini
um
Capability Matrix
Jotu
n Coa
tings
6
Engi
neer
ing
& Te
chni
cal
serv
ices
Topsides engineering
Marine engineering & mooring designTechnical & production servicesAdministration & IT services
Equi
pmen
t & s
yste
ms
supp
liers
Electric/automation/telecomCranes, lifting & mooringsProcess equipment
Rotating equipment
Safety equipment
Other mechanical equipment
Drill
ing Drilling systems
Oglaen
d Sys
tem
Palfin
ger M
arine
Petro
link
PG Flow
Solu
tions
Pon P
ower
Prezio
so Li
njeby
gg
Rapp B
omek
REINER
TSEN
AS
Rolls R
oyce
Mar
ine
Scan
a Ind
ustri
erSe
van M
arine
Siem
ens O
il & G
as an
d Mar
ine
Tech
nip N
orge
Ther
mte
ch
TESS
as
Tam
roto
r Mar
ine C
ompr
esso
rs A
STo
rgy M
ek In
dust
ri AS
Trell
ebor
g Offs
hore
Nor
way A
S
Wär
tsilä
Oil &
Gas
Sys
tem
s
Woo
d Gro
up M
usta
ng
Sem
co M
aritim
e
Noven
co
7
ABB AS
ABB is a leader in power and automation technologies that enable utility and industry customers to improve their performance while lowering environmental impact. The ABB Group of companies operates in around 100 countries and employs about 150,000 people.
Innovation through oil and gas experience and proven ability to handle large projects in automation, tele-communication and electrification including e-houses distinguish ABB as a highly competent supplier to the offshore industry.
PRODUCTSABB combines innovative automation, electric, telecommunication solutions and EPC know-how for the offshore Oil and Gas industry including fixed, floating and subsea facilities. The portfolio specific to market are:
FULL EICT INCLUDING• e-house modules• Electrification• Power and energy Management• Power-from-shore (HVDC Light)• AC/DC Drilling drives• A complete range of AC electric propulsion and
thruster systems• Azipod propulsion• Integrated operations• Remote operations• Safety and automation system• Historian and information management• Instrumentation• Asset management
TURN-KEY EPC DELIVERY OF TOPSIDE MODULES INCLUDING• Flare systems • Water injection• Fuel gas• Process separation and PW treatment
• Compression and gas treatment (TEG)• Close/open drain systems• Power gen modules• On-skid fire & gas and safety systems• Pipe-racks with integrated process piping and
cable trays
SERVICESABB can participate and contribute in all phases of a project from feasibility study to operation as Main Instrument/Automation Contractor, Main Electrification Contractor, Main Telecommunication Contractor.
The activities include:• Project management• Studies• Engineering design• Procurement• Configuration / Integration• Start-up• Commissioning• Training• Full service• Global after market services
REFERENCESABB has delivered to more than 60 FPSO’s around the world. Clients include: Statoil, ENI, Petrobras, EnQuest, Teekay, Inpex, Dana.
Contact person: Stein GuldbrandsøyTitle: V.P: Global FPU Business ManagerE-mail address: [email protected] website: abb.com
TOPSIDES ENGINEERINGMARINE ENGINEERING &MOORING DESIGN
ELECTRIC/AUTOMATION/TELECOMROTATING EQUIPMENT
DRILLING SYSTEMS
8
Aibel as
Aibel is a Norwegian EPC company in the Oil & Gas Industry that has a strong track record in Greenfield Development and Brownfield Modification and Maintenance Programs. The Engineering, Procurement and Project Teams in various locations in Norway and its Yard in Haugesund are reinforced by its Singapore Engineering Office and Fabrication facility in Thailand in delivering high quality projects, safely and on time.
PRODUCTSTopside decks, FPSO topsides/modules, produc-tion modules for jack-up rigs, process systems, onshore terminals.
SERVICESThe core competence includes concept and FEED studies, Engineering, Procurement and Construction (EPC) contracts for complete platform and FPSO topsides, process systems, onshore terminals, maintenance, modification and operation.
Contact person: Teofilo Asuan Santiago IVTitle: Senior Manager-Business DevelopmentE-mail address: [email protected] website: aibel.com
TOPSIDES ENGINEERING
REFERENCES
Project Client Technology
Catcher FPSO BW Offshore Spore/Premier Oil Detailed Engineering DesignCatcher FPSO BW Offshore Spore/Premier Oil FEED studyLeviathan FPSO BW Offshore Spore/Noble Energy FEED studyGudrun Topside EPCH Aibel AS/Statoil EPCi, ModificationDraugen Topside Aibel AS/AS Norske Shell EPCm, ModificationBualuang FPSO Rubicon Offshore & Salamander
Energy Thailand/StatoilFeed study
Skuld Topside Modifications Aibel AS/Statoil EPCi, ModificationSnorre Export Topside Aibel AS/Statoil EPCi, ModificationVisund Sor Modification Aibel AS/Statoil EPCi, ModificationVolve Topsides (Mærsk Inspirer) Mærsk/Statoil EPCIC for topsidesGEM/GEMC Aibel AS/Statoil EPCi, Frame AgreementUla Fire & Gas Aibel AS/Statoil EPCi, Frame AgreementVincent FPSO Topsides Maersk/Woodside FPSO EPCEttrick FPSO Topside Modules Bluewater/Nexen FPSO EPCAlvheim FPSO Topside Aibel AS/Marathon FPSO EPCIC
9
Aker Solutions
Aker Solutions is a global provider of products, systems and services to the oil and gas industry. Its engineering, design and technology bring discoveries into production and maximize recovery. The company is headquartered in Oslo, Norway and employs approxi-mately 17,000 people in about 20 countries. Aker Solutions has been a major contributor to offshore technology development, particularly in deepwater and harsh environment.
Front End Spectrum: Front End Spectrum is the culmination of more than 40 years of Aker Solutions offshore technology experience packaged into a state of the art front end offering. Engineering field solutions, executing offshore development projects, delivering advanced technology and supporting field operations with modifications and upgrades is all embedded in the Front End Spectrum DNA. Our 500-strong global team has hands-on life of field know-how from all phases and disciplines of oil and gas fields. Topsides Engineering: Aker Solutions has been designing, constructing and delivering offshore platforms for more than 40 years. During this period, the company has designed and delivered around 40 offshore facilities, six of which have a topsides weight exceeding 30,000 tons. With a global engineering presence, Aker Solutions delivers FEED and detail engineering services from
its main hubs in Oslo, London, Mumbai and Kuala Lumpur, ensuring cost-effective project execution for our customers. Floaters/Sub-structures: Aker Solutions designed and delivered its first floating drilling rigs in the late 1960’s. Today we offer a full range of floating production systems designs, covering semisub-mersible platforms, Tension leg platforms, Spars and FPSO’s. In addition, a range of designs are offered for semisubmersible drilling rigs. Any kind of fixed substructures are also part of our engineering services.Maintenance, modifications & operations: Aker Solutions is a leading global provider brownfield services for offshore production facilities, includ-ing maintenance and major modifications such as field upgrades, tie-ins, IOR/EOR and life exten-sions. We serve the whole value chain from front end studies to installation and commissioning.
Contact person: Hans Petter JacobsenTitle: Head of Business Development, Engineering NorwayE-mail address: [email protected] website: akersolutions.com
TOPSIDES ENGINEERING MARINE ENGINEERING &MOORING DESIGNTECHNICAL & PRODUCTIONSERVICES
REFERENCESThe list below shows only a few examples of products and designs delivered for floating installations. For a more comprehensive list please contact us, or see www.akersolutions.comProject Client Technology
Johan Sverdrup field center, Norway Statoil Feasibility and concept studies, FEED and detail engineering
Johan Castberg semi/FPSO, Norway Statoil Extended concept studyKebabangan topside, Malaysia ConocoPhillips FEED + Detail engineeringGjøa semsubmersible, Norway Statoil EPCH for hull and topsidesSkarv FPSO, Norway BP FEED and EPcma P51 and P52 semi hulls, Brazil Petrobras FEEDHadrian semi, Gulf of Mexico ExxonMobil FEED Hull and MooringAasta Hansteen Belly SPAR hull, Norway Statoil FEEDEdvard Grieg topside, Norway Lundin FEED + EPBlind Faith semisubmersible Gulf of Mexico
Chevron FEED and EPCI of hull, mooring and risers
White Rose FPSO, Canada Husky Detail engineering and procurementH6e Drilling Rig Aker Drilling Concept development, FEED, engineering,
procurementIchtys semi + FPSO hull, Australia Inpex FEEDBrowse TLP, Australia Woodside FEEDAdriatic LNG regasification terminal, Italy
ExxonMobil and Qatar Petroleum
FEED and detail engineering
Bergading, Malaysia Hess Detail engineering
10
Alfsen og Gunderson as
Alfsen og Gunderson supplies a large scale of equipment for transport and treatment of water and process fluids offshore. Our scope of supply includes Chemical injection sys-tems, centrifugal pump packages, high pressure pumps, filters, mixers and equipment for disinfection of water based on dosing of chlorine or UV-radiation. The equipment can be supplied in many different materials according to the customer requirements.
A thorough knowledge of customers’ processes and requirements is vital if we are to give the best possible service. Close, long-term cooperation is essential to develop and perfect our systems. With efficient systems, thorough working methods and punctual deliveries, we aim to create added value for our customers Alfsen og Gunderson is accredited in Achilles.
PRODUCTS• Chemical- and methanol injection pump packages• Mixing Cabinets and tank systems including
agitators and control equipment• Miscelleaneous pump packages
• Basket Strainers, Cartridge Filters and Bag Filters• Automatic Backwash Filters• Kenics Static Mixers• Agitators for Drilling Fluids• UV-sterilizers – Atex approved and certified by FHI• Dehumidifier solutions
SERVICES• Package supplier for potable water treatment• Design• Project Management• Equipment delivery• Commissioning• After Sales
Contact person: Helge Randem Title: EVPE-mail address: [email protected] website: ag.no
PROCESS EQUIPMENT ROTATING EQUIPMENT OTHER MECHANICAL EQUIPMENT
REFERENCESA selection only. A complete reference list is available upon request.
Project Client Technology
EKOB 2/4 Conoco Phillips Dehumidifier for permanent corrosion protection in tanksNorne Statoil Potable water UV-sterilizer, Hypochlorite dosing system
and flow metersOseberg Field Aibel/ Statoil Potable water pre-filter skid, UV-sterilizer skid and
Hypochlorite dosing skidOseberg C Aibel/ Statoil Potable water pre-filter skid, UV-sterilizer skid and
Hypochlorite dosing skidOseberg Field Bilfinger Dehumidifiers for surface treatment jobsGoliat Hundai/ ENI Chemical injection package, Bilge pumps, Mixing/tote tanksGudrun Aibel/ Statoil Potable water UV-sterilizer, Hypochlorite dosing systemNorne Aibel/ Statoil Mixing cabinet, tank and pump skid unitsKollnes Aker Solutions/ Statoil Potable water filtration and UV-disinfectionAdriatic LNG Terminal
Exxon Mobile Dehumidifiers for equipment rooms between LNG tanks
Gullfaks C Aker Solutions/ Statoil Potable water UV-sterilizer installed in containerSnorre A Aker Solutions/ Statoil Potable water Cartridge filter and UV-sterilizer packageOrmen Lange Linjebygg Offshore Dehumidifier for surface treatment jobsGjøa Aker Kværner/ GFD
SuezPotable water Cartridge filter, UV-sterilizer package and Hypochlorite dosing
Tambar Aker Kværner/ BP Dual seawater filtration
11
Aquamarine Subsea AS
Contact person: Per-Allan RøsandTitle: Executive Vice President Business DevelopmentE-mail address: [email protected] website: aquamarine.no
TECHNICAL & PRODUCTIONSERVICES
CRANES, LIFTING & MOORINGSOTHER MECHANICAL EQUIPMENT
DRILLING SYSTEMS
Aquamarine Subsea provides oilfield products and services to improve assets utilization to the global oil and gas industry.
Our knowledge and technologies span from the top of the derrick to the wellhead connector at the seabed. Aquamarine offers innovative solutions and service for critical equipment used in drilling and production operations. Our service includes modifications, maintenance and repair of pressure control equipment/systems, drill floor and moon-pool handling. Our experience is related to equip-ment such as BOPs, risers, tensioners, valves, kill and choke manifolds, mud pumps, crown blocks and much more.
Innovative EngineeringAquamarine provides our customers specialized design, engineering, and manufacturing services for the offshore oil and gas market. Aquamarine can offer complete product support from con-ceptual engineering design, to fabrication and installation of these services. Aquamarine has the capability to perform rig surveys, installations, and technical assistance to our customers globally in order to cater a turnkey solution.
Pressure Control Equipment IMRAquamarine offers its customers a complete ser-vice center for the modification, maintenance, re-certification and repair of pressure control equipment for drilling and production units for both surface and subsea operations. Aquamarine’s experience relating to BOP repair work stretches back to the early 1980s. Since that point, over 150 BOPs have successfully passed through our dedicated workshop.
Riser IMRAquamarine’s expertise and commitment to inno-vation has empowered an industrial breakthrough. We have developed a new process for work over risers based on thermal coating, utilizing tungsten carbide and Inconel 625 coatings to significantly reduce the cost of maintenance. Our services also include inspection, maintenance, repair and modification of drilling risers, both for high-pressure and low-pressure operations.
Experts in thermal coatingAquamarine’s first class thermal coating solution unlocks greater efficiencies within the drilling and subsea sectors.Our unique treatment suitable for both repair and new products, extends equipment lifecycles and reduces overall costs. Instead of purchasing new equipment the Aquamarine Thermal Coating Solution makes it possible to repair and re-certify used equipment.
Advanced Welding.Aquamarine has established its welding repu-tation on the foundation of 30 years of experi-ence, achievement and customer satisfaction. Our welding team, consisting of experienced International Welding Engineers (IWE) and International Welding Specialists (IWS).
REFERENCESProject Technology Operator LocationHeimdal Manufacturing of new HP drilling risers Statoil Norway
Ekofisk Repair and re-certification of drilling and hoisting equipment Conoco Phillips Norway
Statfjord Manufacturing HP Drilling risers Statoil Norway
Balder Repair and recertification of Work Over Risers ExxonMobil Norway
Ekofisk Repair and re-certification of HP Riser System Conoco Phillips Norway
Gullfaks Repair and recertification of drilling equipment Statoil Norway
Ormen Lange Refurbishment and re-certification of Work over risers Shell Norway
Tyrihans Refurbishment and re-certification of Work over risers Statoil Norway
BP West Africa 500/350 ton Motion Compensated Coil Tubing Lifting Frame BP Angola
Diamond Offshore
500/350 ton Motion Compensated Coil Tubing Lifting Frame (2-off)
Diamond Offshore
Gulf of Mexico
Diamond Offshore
Engineering, fabrication, stack-up and field assistance with modification of BOP stack frame for five (5) drilling units (MODU)
Diamond Offshore
Gulf of Mexico
Transocean Engineering, fabrication, stack-up and field assistance with BOP stack frame for three (3) drilling units (MODU)
Transocean Gulf of Mexico
12
Autronica Fire and Security AS
Oil and gas installations around the world are becoming a safer place to work - We are bold enough to take some of the credit.
Autronica Fire and Security is a leading innovator, manufacturer and supplier of fire and gas safety worldwide. Our products ensure safety in applica-tions onshore and offshore and in the petrochemical, oil and gas sectors. We employ more than 500 people handling the complete value chain, from idea, development and manufacturing to the marketing, sales and servicing of our products. We are an international company with worldwide offices and our HQ is located in Trondheim, Norway’s technology hotspot.
PRODUCTS• AutroSafe Integrated Fire & Gas Detection with
SelfVerify®; the world’s first IEC 61508 Safety Integrity Level 2 (SIL2) certified integrated addressable Fire & Gas Detection System.
• AutroSafe IFG provides smart technology performing full detection chamber self-testing and calibration every 24 hours. This reduces the maintenance cost significantly.
• Gas Sampling; gas detection for harsh environ-ment where direct gas detection is not suitable or impractical like shale shaker ventilation, bal-last tanks and vessels with double hull
• Full range of flame and gas detectors• High Sensitive Smoke Detection (HSSD)• AutroMaster ISEMS (Integrated Safety
Emergency Management System)
SERVICESWe offer world-wide service and support via our offices in Stavanger, London, Houston, Kuala Lumpur, Busan, Dubai, and Aberdeen, and have a global net-work of authorized distributors. Services include;• System design• Project management• Installation, commissioning and supervision• After sales service and spare parts• Training• 24/7 end user support
Contact person: Bjørn Willy KjærTitle: Vice President – Petrochemical, Oil & GasE-mail address: [email protected] website: autronicafire.com
ELECTRIC/AUTOMATION/TELECOM SAFETY EQUIPMENT
DRILLING SYSTEMS
REFERENCESAutronica Oil & Gas Division has a comprehensive global reference list. Sample of references are:
600 offshore platforms 250 drill ships/drill rigs 150 FPSO/FLNG 150 onshore productions/petrochemicals
100 semisub rigs
Ivar Aasen Pride BWO Catcher Estacao Norbe VIEdvard Grieg Saipem Clove Mongstad Sedco 711V.Filanovskaya Seadrill Ichthys Rnest SeadrillHess Stampede Odebrecht PetrobrasP51,52 Tout Lui Faut Jack BatesMariner Ocean Rig ENI Goliat Comperj Cosco QuestShell Malikai Diamond Petronas I FLNG Ras Laffan Sevan DrillerBP Clair Ridge Transocean Petronas II FLNG QC LNG COSL PioneerMartin Linge Ensco Shell Prelude QSTEC Scarabeo 7
13
REFERENCESA selection only, please contact Axess AS for a full list of references.TPU Client Product / Services
Mariner Project (Statoil)
DSME Crane and lifting technology
Gina Krog Project (Statoil)
DSME Crane and lifting technology
Aasta Hansteen (Statoil)
Technip Material handling and layoutSpecialist services in compliance with Norwegian regulations
Peregrino BW Offshore Integrity management and inspection servicesSpecialist services in compliance with Brazilian regulations
FPSO Fluminence MODEC Crane and lifting technologyP-63 Papa Terra BW Offshore Specialist services in compliance with Brazilian regulationsKnarr Teekay Petrojarl Crane and lifting technology
Material handling and layoutSpecialist services in compliance with Norwegian regulations
Edvard Grieg Lundin Norway Integrity management and inspection servicesHumminbird Spirit Teekay Petrojarl Integrity management and inspection servicesCidade de Itajai Teekay Petrojarl Specialist services in compliance with Brazilian regulationsFPSO Athena BW Offshore Electrical engineering
Axess as
Axess is a high competence partner to our customers in achieving long term benefits, helping them reach their goals of maximum production and zero harm. We deliver this through being a leading provider of world-class integrity solutions and material handling equipment. We assist in all phases from design to decommissioning, all over the world.
Axess has long term contracts with international companies from the rig-, oil/gas-, offshore- and energy industries. Our head office is in Molde, and we are also situated in Bergen, Trondheim, Kristiansund, Orkanger, Houston, St John’s, Rio de Janeiro, Singapore and Cape Town. Axess has 320 employees. In 2014 Axess performed work for more than 180 offshore units in all parts of the world.
PRODUCTSMaterial handling equipment e.g:• Winches• Spooling winches• Hose reel stations• Material handling cranes• BOP cranes• Gantry cranes• Gripper yokes• Tension ring manipulators• Stabbing baskets• Control systems (retrofittable)• Crane cabins (retrofittable)
SERVICESLifecycle – phase:FEED/Detail Engineering:• Crane and lifting technology• Material handling and layout• Maintenance engineering• Safety engineering• Integrity engineering• Specialist services in compliance with
Norwegian and Brazilian regulations
Construction/Mechanical Completion/Commissioning:• Crane and lifting technology• Material handling• QC services• Specialist services in compliance with
Norwegian and Brazilian regulations
Operation:• Crane and lifting technology• Safe lifting operations• Mechanical engineering• Electrical engineering• Maintenance management• Integrity management and inspection services
Contact person: Knut StefanussenTitle: VP Sales and MarketE-mail address: [email protected] website: axess.no
TOPSIDES ENGINEERINGTECHNICAL & PRODUCTIONSERVICES
CRANES, LIFTING & MOORINGS
DRILLING SYSTEMS
14
Bilfinger Industrier Norge AS
Bilfinger Industrier Norge AS is a leading provider of ISP (Insulation, Scaffolding and Surface Protection) and Related Services to the Norwegian Oil and Gas industry. Bilfinger Industrier is a part of the Oil and Gas Division within Bilfinger SE, a leading Engineering and Services Group with 70,000 employees worldwide, and revenue of €8billion. Bilfinger’s Oil and Gas Division is active in Norway, Denmark, UK and North America, providing a range of Fabric Maintenance Services. Bilfinger Industrier designs and manufactures a range of prefabricated insulation and passive fire protection (PFP) products for the global Oil & Gas Industry.
PRODUCTSThe Bilfinger Lambda Product Family include the following:• Lambda F – Fire Protection Boxes & Jackets for
valves, flanges, pipe• Lambda F – Pipe Penetration Seals and
Boltcare Solution• Lambda A – Acoustic Insulation, Curtains or
Flexible Jackets • Lambda C – Cryogenic Insulation• Lambda T – Thermal Insulation, including
acoustic and personnel protection• Lambda S – Subsea Insulation
All products are fully tested and certified by DNV-GL, and meet NORSOK requirements. The materials used for our Lambda F product line include Polymer Materials (Powered by Favuseal™) products, as well as epoxy and traditional
insulation materials. Bilfinger Lambda products are ultra-slim building, quick and easy to install with minimum use of personnel and tooling, and are cost effective, quality solutions for the Yards. The products are durable, maintenance-free and are easy to remove and re-install for inspection and repair of the protected object resulting in low total cost of ownership.
SERVICESBilfinger Industrier provides Engineering Services within the ISP trades, including development of IPS and training of personnel. The Bilfinger Academy has provided training in Korea, Brunei and Poland in addition to Norway. Within the Oil and Gas Division, we have access to Engineering Resources with a broad range of Fabric Maintenance experience, including Architectural & Interior Outfitting, Inspection and NDT services.
Contact person: Tor Ole MinsaasTitle: Director, Products & TechnologyE-mail address: [email protected] website: industrier.bilfinger.no
TECHNICAL & PRODUCTIONSERVICES
SAFETY EQUIPMENTOTHER MECHANICAL EQUIPMENT
REFERENCES
Customer Project Product
DSME Clov (Total Angola) Lambda F - PPSHHI Goliat Lambda F - PPSShell Ormen Lange Lambda F - Boxes, Jackets / Lambda T - Boxes, JacketsStatoil Hammerfest LNG Lambda F - Boxes, Jackets / Lambda T - Boxes, Jackets / Lambda CAker Ekofisk 2/4Z Lambda F - Boxes, Jackets / Lambda T - Boxes, JacketsAker Eldfisk Lambda F - Boxes, Jackets / Lambda T - Boxes, JacketsAker Kashaghan Lambda F - Boxes, Jackets / Lambda T - Boxes, JacketsAker Edvard Grieg Lambda F - Boxes, Jackets / Lambda T - Boxes, Jackets
15
Bostek
Bostek (Bertel O. Steen Teknikk AS) has more than 45 years’ experience as an importer and distributor of diesel engines and propulsion systems from MTU, one of the world’s leading manufacturers.
MTU supplies a wide range of diesel engines for ships, onshore industry, agriculture, railways, military vehicles, and the oil and gas industry. For commercial applications, the range includes the renowned Series 2000 engines (outputs from 300 to 1,500 kW) and Series 4000 engines (outputs from 700 to 3,500 kW).These diesel engines, renowned for their excellent quality, are highly suitable for maritime applica-tions due to their high power-to-weight ratio. The engines are economical, environmentally friendly and robust.Bosteks main business is deliveries of diesel engines, propulsion systems and generator sets for diesel-electric maritime systems. We design, engineer and manufacture marine generator sets for most types of maritime applications. We also provide service for all applications.We have an established and documented quality management system certified according to quality standard NS-EN ISO 9001:2008. The company is also registered in Achilles JQS and TransQ, as an approved supplier to the oil and gas industry and to the Nordic transport sector.
PRODUCTSDiesel generator sets for:• Diesel electric propulsion (typically OSVs) fixed
speed / variable speed gensets• Aux genset (OSVs, jack ups)• Emergency / harbour gensets
SERVICESBostek‘s engineering department consists of a
group of experienced project managers, engineers and assemblers who adapt our products to the customer’s requirements and ensure timely deliv-ery of projects in accordance with contractual and quality requirements. Based on our internal exper-tise in mechanical and system design, Bostek develops its own generator set solutions based on MTU engines and generators of different brands. We are continuously developing and improving our products in order to be a leading supplier of generator sets and propulsion solutions for our customer segment.Bostek can offer highly qualified service/electronics technicians, who have completed specialized courses in each engine series that we are dealers for on behalf of MTU, Detroit Diesel and Mercedes.Our technicians are highly skilled and have long experience of the industry, and they are ready to help our customers with service and maintenance at short notice. Support and guidance in how to main-tain and handle the products you buy are important in order to ensure safe operation of your vessel/plant.
REFERENCESExamples Main propulsion gensets OSVs:MS Basic Commander, MS Havila Charisma, MS Torsborg, MS Eldborg, MS Far Server
Examples Emergency gensets OSVs:MS Island Intervention, MS Fugro Symphony, MS Aker Wayfarer, MS Skandi Acergy
Examples Main gensets jack ups:Aryan & Arjun (Eversendai), GMS Sharqi, Scirocco & Shamal (GMS), Seajacks Hydra
Contact person: Erik H. TvedtTitle: Sales Manager MarineE-mail address: [email protected] website: bostek.no
MARINE ENGINEERING &MOORING DESIGNTECHNICAL & PRODUCTIONSERVICES
ELECTRIC/AUTOMATION/TELECOM ROTATING EQUIPMENT
16
BVS AS
BVS AS is a Norwegian based world supplier of cable management solutions for the oil and gas market. Our productrange is specially designed for offshore and arctic environments. Manufacturing is carried out in Norway, Estonia and United Kingdom.
PRODUCTSBVS offers a complete range of cable manage-ment systems and complementary products:Cable Ladders, Cable Trays, Tubing Clamps, Strut Systems, Glands, Special Brackets, Trefoil Cleats, Racks, Earthing Products
SERVICESAll products are produced in stainless steel AISI 316Land 6MO. Other material qualities can be produced on request. The products are specially designed for use on offshore installations and in arctic climates with extreme weather conditions.
We have come up with a new range of products specially designed to handle the tough conditions in the Caspian Sea.
REFERENCESNyhamna Expansion Project,Kashagan Field Development – Experimental Programme,Kashagan Field Development – Experimental Programme Hook Up,Ormen Lange Project, Blind Faith, Tyrihans, Kristin, Gjøa Semi EPCH, Gjøa Living Quarter
Contact person: Tom SvanbergTitle: Managing DirectorE-mail address: [email protected] website: bvscm.no
ELECTRIC/AUTOMATION/TELECOM OTHER MECHANICAL EQUIPMENT
17
Callenberg Technology Group
Callenberg Technology Group is an international provider of Insulation, HVAC and Electrical Energy Management solutions for the maritime, offshore & energy markets.
HVACWe design and deliver HVAC and refrigeration solutions for the lifecycle of a vessel, rig or platform, supported by a worldwide network of after-sales stations.
Electrical Energy ManagementWe design, produce, install, commission and ser-vice electrical and energy management solutions for newbuilds and retrofit projects. Our portfolio includes energy management, automation, electri-cal engineering & contracting and switchgears.
InsulationWe are the leading provider of low temperature and cryogenic insulation technology for liquefied gas cargos and NGL pipe applications. Within the offshore industry, we are providers of traditional insulation and architectural outfitting.
PRODUCTS FROM OUR OFFSHORE DIVISIONHVAC equipment supply capabilities:• Air handling units• Axial, centrifugal and plug fans• Fan coil units• Intake systems with filters and separators• Inlet and outlet louvers• Self-contained units• Refrigeration machinery• Provisional stores cooling• HVAC automation & controls• All types of dampers• In line duct accessories
SERVICES• Design• Project management• Equipment delivery• Installation• Testing and commissioning• Aftersales support, including:
· Operator training· Service agreements· Modifications and maintenance· Indoor climate and environmental analysis· Offshore surveys· Spare parts
REFERENCES• Aker Solutions• Apply Leirvik• AS NorskeShell• British Petroleum• Conoco Phillips• Daewoo Shipbuilding & Marine Engineering• Dolphin Drilling• Hyundai Heavy Industries• Jurong Shipyard Pte. Ltd.• Kværner• Odfjell Drilling• Prosafe• Samsung Heavy Industries• SMOE Pte. Ltd.• Songa Rig• Statoil• Technip• Total
Contact person: Stephen LawtonTitle: Sales directorE-mail address: [email protected] website: callenberg.com
ELECTRIC/AUTOMATION/TELECOMSAFETY EQUIPMENTOTHER MECHANICAL EQUIPMENT
18
CMA Contiki as
Founded in 1989, CMA Contiki is a software company that specializes in Contract Management and eSourcing solutions for oil and gas exploration companies and contractor industries. CONTIKI™ is suited for both large multinational operators and contractors, but also small business units with only a handful of contracting personnel.
Contiki manages all kinds of commercial contracts, such as strategic procurements, joint venture, partnering, sales and project contracts. CONTIKI is proven through 24 years and was in 2013 rated by Gartner as “best-in-class” for its contract management capabilities.
PRODUCTSOn-premises software solution offerings:• CONTIKI ECM – Contract Manager’s workbench• CONTIKI CCS – Collaboration portal for con-
tributors, approvers and stakeholders• CONTIKI Sourcing – Integrated with contract
manager’s workbench• CONTIKI eContracting- Integrated contract
workspace for your counterparts• CONTIKI Achilles Interface – transfer of bidder
lists to CONTIKI• CONTIKI ERP Interface – Framework for inte-
grating with SAP and other ERP systems
SERVICESProfessional services offerings to clients globally:• Implementation services• System integration• 24x7 Technical support • On-site Classroom training • Best Practices workshops
REFERENCESA selection only, please contact CMA Contiki for a full list of references.• Total E&P• Statoil • Gassco • Centrica • Gdf Suez E • Lundin Petroleum• DNO • DEA Group• Halliburton• Aker Solutions • Cofley Fabricom
Contact person: Christian Hjorth-JohansenTitle: VP SalesE-mail address: [email protected] website: cmacontiki.com
ADMINISTRATION & IT SERVICES
19
COMPUTATIONALINDUSTRY TECHNOLOGIES AS
ComputIT
Computational Industry Technologies AS, ComputIT, is a specialist company working worldwide with focus on CFD-based turbulent flow and combustion using our software KAMELEON FIREEX KFX® as basis for optimum design for fire and explosion safety. Cost effective solutions have been developed for the oil and gas industry with potential for huge savings combined with enhanced safety.
PRODUCTS
KAMELEON FIREEX KFX® In the oil and gas industry, KFX™ is recognized as the leading industrial CFD technology for simula-tion of flares, gas dispersion, fire development and fire mitigation for realistic conditions in complex structures. For prediction of consequences of gas explosions in congested geometries, KFX™ features the well-known and extensively validated EXSIM gas explosion simulator from Shell. The advanced and user-friendly KFX™ technology stands out as the preferred tool for finding cost-effective solutions to both fire and explosion safety problems.
SERVICESIn general our services cover Fire and Explosion Safety Design: • Cost effective solutions for design of Passive
Fire Protection, PFP• Cost effective water based fire mitigation solutions • Advanced flare analyses as basis for
design solutions• LNG accidents – detailed simulations and analy-
ses of leaks, dispersion, fires and cryogenic loads• Advanced gas explosion simulations including
also structural response to explosion loads• Ventilation analyses
Also other areas are covered: • Effective and environmental friendly design of
combustion devices as burners, incinerator, flare tips and others
• Marine hydrodynamics• Modeling of environmental loads on vessels and
marine structures for marine simulators• Aerodynamics
REFERENCESHundreds of projects references for:• offshore installations; platforms, rigs, FPSOs, FLNGs• onshore process plants• onshore LNG facilities• others
Main customers (services and software):• BP• Statoil• Total• ENI• ConocoPhillips• Gassco• Lloyds Register Consulting• DNV GL• GdF Suez• MMI• ERM• Vard
Contact person: Trond EvangerTitle: Managing Director / CEOE-mail address: [email protected] website: computit.no
TECHNICAL & PRODUCTIONSERVICES
20
Cranemaster (Ernst-B. Johansen AS)
The business of Cranemaster and Cranemaster technology is reduction of forces in offshore lifting operations originating from wave motions. These reductions are based on passive heave compensation and shock absorption. Clients worldwide have been able to increase the opera-tional weather window for lifting operations at sea since 1983 using Cranemaster products.
We have a large rental fleet for lifts up to 1200 Ton ready for immediate dispatch. In addition, we develop units tailor-made to clients specifications and pro-vide engineering services related to lift analysis.
COMMON APPLICATIONS: • Increase offshore crane lifting capacity• Reduce DAF in offshore lifts• Increase weather window for splash-zone crossing• Remove possibility for resonance during subsea
lowering operations• Reduce landing speed and motion for subsea
installations• Protect the crane/winch during subsea recovery
and decommissioning operations• Load tensioning for air or subsea installations• Protect equipment or personnel from shock loads
PRODUCTS:• Cranemaster units for rental with load range
from a few tons up to 1200 tons.• Special designed units for sale or rent.
SERVICES:Lift analysis. Cranemaster has significant expertise in lift analysis and planning. Analysis is conducted with Orcaflex and/or own developed software for all lifting phases.
REFERENCES / GLOBAL CONTACTS:Cranemaster - Ernst-B. Johansen AS is today the world leader in its field with a client roster rang-ing from small diving companies to most of the world’s largest marine contractors for oil, gas and renewable energy.During 2013 and 2014 Cranemaster Technology was used by Chevron and Subsea 7 on the Gorgon and Janz field in Australia for installation of 20 structures with rigging weight up to 1000 ton and installation depth down to 1300 meters. This represents the world record for load in heave compensated lifting operations.
MARINE ENGINEERING &MOORING DESIGN
CRANES, LIFTING & MOORINGS
Contact person: Kristian HellandTitle: Product ManagerE-mail address: [email protected] website: cranemaster.no 21
CRE8 systems as
CRE8 is an innovative and quality-oriented package supplier including engineering and manufacturing of systems for the international oil and gas industry.
CRE8 ADVANTAGESBy industrializing and standardizing systems, CRE8 now is the most successful Norwegian supplier of Wellhead Control Panels and Hydraulic Power Units.
CRE8 has a positive reputation for delivering on time and budget and we put a lot of effort in submitting documents to the right quality on first issue. This saves our customer for a lot of time for commenting documents and ensure we start the project correctly from day one.
Changes occur without exception in all projects. CRE8 Flexible WHCP is pre-designed with flexibil-ity to cover for the most common changes to be implemented with a minimum of impact.
Initial Cost saving by comparing CRE8 Flexible WHCP towards customer specified is between 25% and 30%. Additional advantages are Customer significant reduction in following up and engineering, flexibility to changes, quality and weight, mainly achieved by the high level of advanced detailed engineering.
TYPICAL PRODUCTS:• Wellhead Control Panel (WHCP) Complete Control System for Dry-X-Mas Tree on Topside Wellhead/Drilling Platforms
• Hydraulic Power Unit (HPU) Typical Subsea Tie-in and Topside Projects
• Chemical Injection Systems (CIS)Typical for Process Platforms
REFERENCES:
Operators• Statoil• Total• Petrobras• BP• Talisman• Det Norske
Engineering• Aker Solution• SMOE• FMC• Technip• Wood Group Mustang Engineering• Aibel
Contact person: Morten BøgildTitle: CEOE-mail address: [email protected] website: cre8-systems.com
TOPSIDES ENGINEERINGTECHNICAL & PRODUCTIONSERVICES
ELECTRIC/AUTOMATION/TELECOM PROCESS EQUIPMENTROTATING EQUIPMENT OTHER MECHANICAL EQUIPMENT
DRILLING SYSTEMS
3 D Model CRE8 Flexible WHCP including HPU
22
Delta-p Pumpe og Kompressorsystemer as
Delta-p Pumpe og Kompressorsystemer as is a Norwegian OEM supplier of all kinds of pumps and pump packages for the oil and gas industry.
Our main features is to deliver customized rotatingequipment fully tested according to customers’specifications.
PRODUCTS• Miscellaneous Pump Packages• Crude oil and Condensate Pumps• Wellhead and Topside High pressure injection
Pump Packages (MEG/Methanol)• High Pressure MUD Injection Pumps
• Sampling Systems for oil export metering.• SW Booster and Water Injection Pumps• Process pumps for all type of applications.
SERVICESAftermarket department that will support spare parts and service / overhaul of equipmentService technicians with offshore certificate and personnel with OLF certificates. We can also offer support for installation activities on platforms.
Contact person: Inger Lise SandbeckTitle: Business/Sales ManagerE-mail address: [email protected] website: delta-p.no
ROTATING EQUIPMENTOTHER MECHANICAL EQUIPMENT
Full power mixing unit incl. sampling cabinet
Statoil water injection skid
Statoil MEG injection skid
FPSO chemical injection skid
23
DNV GL
Driven by our purpose of safeguarding life, property and the environment, DNV GL enables organizations to advance the safety and sustainability of their business. We provide clas-sification and technical assurance along with software and independent expert advisory services to the maritime, oil and gas, and energy industries. We also provide certification services to customers across a wide range of industries.
Combining leading technical and operational expertise, risk methodology and in-depth industry knowledge, we empower our customers’ deci-sions and actions with trust and confidence. We continuously invest in research and collaborative innovation to provide customers and society with operational and technological foresight. With our origins stretching back to 1864, our reach today is global. Operating in more than 100 countries, our 16,000 professionals are dedicated to helping cus-tomers make the world safer, smarter and greener.
SERVICES• Offshore Classification• Verification• Technical Advisory• Risk Advisory Services• Rig Moving• Marine Warranty Services
REFERENCES• Premier Oil Catcher Field • Statoil Aasta Hansteen Field• Modec Tweneboa, Enyenra (Owo) and
Ntomme(TEN) Field• (OCTP) - Sankofa and Gye Nyame Field• Teekay - Petrojarl Cidade de Rio Das Ostras FPSO• Petrobras 74 - Buzios 1 FPSO
Contact person: Ernst MeyerTitle: Director of Division – Offshore ClassificationE-mail address: [email protected] website: dnvgl.com
TECHNICAL & PRODUCTIONSERVICES
24
Draka Norsk Kabel
Draka Norsk Kabel is a part of the Prysmian Group, a worldwide leader in the cable industry. Prysmian Group believes in the effective, efficient and sustainable supply of energy and information as a primary driver in the development of communities. With this in mind, we provide major global organisations in many industries with best-in-class cable solutions, based on state-of-the-art technology.
Through two renowned commercial brands – Prysmian and Draka – based in almost 100 countries, we are constantly close to our custom-ers, enabling them to further develop the world’s energy and telecoms infrastructures, and achieve sustainable profitable growth.
In our energy business, we design, produce, distribute and install cables and systems for the transmission and distribution of power at low, medium, high and extra-high voltage. In telecoms, the Group is a leading manufacturer of all types of copper and fibre cables, systems and accessories – covering voice, video and data transmission.
Drawing on over 130 years’ experience and con-tinuously investing in R&D, we apply excellence, understanding and integrity to everything we do, meeting and exceeding the precise needs of our customers across all continents, at the same time shaping the evolution of our industry.
Power solutions for the future of energy
With global demand for energy rapidly increasing, companies blazing a trail in extreme northern climates like the Arctic region, Barents Sea, Kazakhstan, North America or even the frozen plains of Russia, have come to depend on Prysmian Group for their cabling solutions.
Prysmian Group’s broad range of cables, are proven to meet or exceed operational require-ments. Our manufacturing features the most advanced equipment and technology, while rigorous material testing ensures operational longevity.
The challenges posed by the different harsh environ-ments encountered in global oil and gas exploration need experienced engineering teams. By developing advanced/special cabling solutions, Prysmian Group is the ideal partner for your projects.
PRODUCTSDraka Norsk Kabel has built a long standing repu-tation as a leading wire and cable manufacture in the oil and gas segment. In addition to our RFOU and BFOU cable range we always have the desire to provide the absolute best solution to the market.
See the short elaborations of some of our other special cable solutions below. JET FIREDraka Norsk Kabel AS is proud to present and offer the new and unique cable design for jet fires to the offshore market. The newly developed Jet Fire cables have the right properties to withstand jet fires at 250 kW/m2 and temperatures exceeding 1200 °C for half an hour.
Arctic cables Cutting-edge materials and design enable our Arctic Grade cables to meet cold impact and cold bend requirements (-40˚C/-35˚C), whilst providing excellent mud and oil resistance. Both the RFOU and BFOU (1 kV & 250 V) cables are for installation in areas exposed to drilling mud (drilling fluids) non mud is also available.
REFERENCESSome of our most recent projects:
Main contracts offshore topsides• Valemon (Statoil/Samsung
Heavy Industries)• Edvart Grieg (Lundin/
Kværner)• Ivar Aasen (Det Norske/
Mustang/SOME)
Main contracts petrochemical plants• Nyhavna (Norske Shell/
Kværner Stord)
Contact person: Arild GranumTitle: Sales Director Oil & GasE-mail address: [email protected] website: prysmiangroup.no
ELECTRIC/AUTOMATION/TELECOM
25
Dwellop as
Dwellop is a Norwegian and independent systems and solutions provider focusing on the design and manufacturing of surface handling equipment for the well intervention market. We are providing a wide range of products from skidding systems to Drilling Units. The company was established in 2014 as result of a management buy-out of Rolls Royce’s well intervention branch, but has a proven track record based on 25 years in the well interven-tion business. We are located in Stavanger, Norway but serving a global market.
PRODUCTSDwellop can provide a range of products and systems to reduce time and cost and to increase safety and capacity for wireline and coil tubing operations on both floaters and fixed platforms.• Skidding System • Weather Deck Hoist for Wireline• Advances Tension Frame • Jacking Frame • Power Stand with Drop in Drum • Remote Operated Wireline Mast• Automated Wireline Handling Tower• Coiled Tubing Advanced Tower
We have also developed Modular Drilling Rigs:• Cantilever Rig 200 MT • Stand Alone Rig 200 MT• Stand Alone Rig 350 MT• P&A Rig
SERVICESDwellop has a highly qualified staff of engineers for pre studies, design and production, for support, upgrades and maintenances throughout the com-plete lifecycle of a well or a product
REFERENCES• BP• Schlumberger• Lupatech• Odfjell Drilling• Aker Q Serv• ConocoPhillips• Baker Hughes• Hess• ConocoPhillips• Statoil• Hess• Baker Hughes• Talisman
Contact person: Endre GaardTitle: Manager Sales and Business DevelopmentE-mail address: [email protected] website: dwellop.no
CRANES, LIFTING & MOORINGSROTATING EQUIPMENTOTHER MECHANICAL EQUIPMENT
DRILLING SYSTEMS
26
Contact person: Endre GaardTitle: Manager Sales and Business DevelopmentE-mail address: [email protected] website: dwellop.no
Eldor AS
Eldor is an engineering company situated at Forus, the heart of the oil capital in Norway. Eldor are providing world class expertise to the O&G Industries for the following fields:
• Control Room and Improved Operations• Control and Safety Systems & Alarm Management• Telecommunication and Industrial IT
PRODUCTSControl Room and Improved OperationsControl and Safety Systems & Alarm ManagementTelecommunication and Industrial IT
SERVICESEldor AS can participate and contribute in all phases of a project from feasibility study to opera-tion as Main Instrument/Automation Contractor, Main Telecommunication Contractor, or EPCI
contractor, as well as acting as consultant for our customer within the disciplines.
The activities include:• Project management• Studies• Engineering design• Procurement• Configuration / Integration• Start-up• Commissioning• Obsolescence studies • Lifetime Extension • Training• After market services
Contact person: Ola GuldbrandsenTitle: Sales ManagerE-mail address: [email protected] website: eldor.no
TOPSIDES ENGINEERINGTECHNICAL & PRODUCTIONSERVICES
ELECTRIC/AUTOMATION/TELECOM
REFERENCES
Project End user
Valhall-Integrated Operations and remote control BP NorgeValhall-Organizational development offshore and onshore BP NorgeValhall-Flanke upgrade project (EPCI) BP NorgeBP Skarv remote control and service procedures BP NorgeUla MP Upgrade Project BP NorgeValhall Server Upgrade BP NorgeTelecom Project Management ConocoPhillips NorwaySAS and Telecom project engineers ConocoPhillips Norway(NEM, South Sudan), IT system supply PetradStakeholder management and dialogue Total E&P NorwayDetail engineering OOC and CCR Martin Linge Total E&P NorwayNew OOC & CCR Martin Linge Total E&P NorwayOOC and CCR philosophies and strategies Det Norske Olje selskap ASAProject Management engineering and construction of Ivar Aasen Operation Center
Det Norske Olje selskap ASA
Ula CCR /Server upgrade BP Norge
27
REFERENCESPartial list from more than 600 wells to date:
EC-Drill®2014 Statoil USA Semi 14062015 Statoil Norway Semi 3292015 Statoil USA Semi 1799RMR® - 2014
Lundin Norway Storm TO ArcticMarathon Norway East Kamelon TO WinnerBP UK Greater Clair Paul B Lloyd
CTS - 2014Ex Mobile Canada West AquariusStatoil Norway Oseberg Delta II Songa DeltaStatoil Norway Oseberg Delta II Songa Delta
Enhanced Drilling
Enhanced Drilling delivers subsea systems and services that transport fluids and solids as well as manage wellbore pressures. We have, for more than 25 years, built a world-class reputation for innovative offshore drilling technology and services used on more than 600 wells to date. The company’s head office is in Straume (near Bergen), Norway. Offices and facilities globally include the UK, US, Australia, Azerbaijan, Canada and Malaysia.
PRODUCTSEC-Drill® is a Managed Pressure Drilling (MPD) system based on a Dual Gradient Drilling (DGD) method. It can be used in both shallow and deep water (including depleted wells), either from a jack-up, platform or a floating drilling vessel. The system reduces BHP (Bottom Hole Pressure) by reducing the riser level in a controlled manner. This way, Equivalent Circulating Density effect (ECD) can be drastically reduced - invaluable when drilling narrow pressure windows, especially in the reservoir section. Instant kick detection capability is also available.
RMR® Riserless Mud Recovery is a risk-reduction system that has enabled operators to drill better, more stable top holes safely, quickly and with less environmental impact since 2003. The system, which has been used on more than 220 wells worldwide, is an innovative way to return mud and cuttings to the rig before the marine riser is run, without discharge to the seabed. It gives primary well control, weighted mud is in the hole at all times, plus any gains or mud losses can be seen early.
MPC Managed Pressure Cementing enables the successful isolation of high-pressure, uncon-solidated water/gas bearing formations with high-performance cement. The wellbore pressure can be managed so that unwanted fluid exchanges between the wellbore and casing annulus are avoided during circulation of cement slurry and its setting time. With MPC, precise control over the pressure and return flow is possible to keep the wellbore pressure profile within the drilling pressure window.
The CTS Cuttings Transportation System transports cuttings away from the well area during top-hole drilling on semi-submersible rigs and during clean-up operations on the seabed. It has been used on more than 400 wells since its introduction in 1997.
SERVICESManaged Pressure Drilling, Dual Gradient Drilling, Managed Pressure Cementing, Cuttings Transportation.
Contact person: Andrés Escalante Title: EVP Sales, Business Development & MarketingE-mail address: [email protected] website: enhanced-drilling.com
TECHNICAL & PRODUCTIONSERVICES
DRILLING SYSTEMS
28
REFERENCES
Project Client Technology
Ekofisk 2/4L ConocoPhillips RO, UV, HypochloritePolar Duchess GC Rieber EnwaMatic on AC plantGrand Canyon Volstad Maritime EnwaMatic on engines and HVAC systemSnorre B Halliburton EOR injection water production 4000qm/dM/S Fram Hurtigruten EnwaMatic technology on HVAC systemBP – Water treatment contract BP Norge Framework contract for technical consulting,
training and maintenance of all fields on NCS
Enwa Water Technology AS
We are a leading manufacturer of competitive energy effective and environmentally friendly water treatment solutions. We supply our products and services to the offshore related, maritime, industrial and property market segments, as well as to clients with special requirements, hereunder Norsok and military specifications. Our head office and manu-facturing is in Norway as well as in Sweden. We manufacture equipment for the treatment of seawater, brackish and contaminated water into drinking, technical and EOR water.
Enwa Water Technology is a fully integrated engi-neering, manufacturing, installation, commission-ing and service/aftersales group of companies. Together with our distributors and agents Enwa is present in more than 30 countries, and we have Enwa subsidiaries in 6 of these countries.
PRODUCTS• Water Makers (RO and EVO) for potable and
technical use as well as EOR water• Ballast water treatment systems with all
approvals
• EnwaMatic®: Closed loop water treatment without chemicals (world patent) of HVAC and engine systems.
• Water treatment systems to safeguard quality, i.e. UV, Hypoclorination, UF etc.
SERVICESTechnical support and advice is provided for all Enwa products and services. We also offer opera-tors general courses in legislation, standards and treatment methods through the Enwa Academy.
Contact person: Björn DörumTitle: DirectorE-mail address: [email protected] website: enwa.com
TECHNICAL & PRODUCTIONSERVICES
PROCESS EQUIPMENT
29
Eureka Pumps AS
Eureka Pumps AS is a pump supplier with more than 35 years of experience in the oil and gas industry, offering a range of pumps and generator sets that covers a majority of applications. Eureka Pumps supplies to new builds and operates advanced maintenance and after market. The company also offers services for upgrading, modification, equipment testing, and installation.
Eureka Pumps is a market leader among companies operating on the Norwegian Continental shelf, and it is also present in the international markets with selected applications, based on own technology.Eureka Pumps main office is in Oslo (Lysaker), Norway, and has branch offices at strategic locations along the Norwegian coast. Eureka Pumps also has offices in Houston, Perth, Busan and Kuala Lumpur.
PRODUCTSMain applications:• Fire Water Pump Systems• Crude Oil Export Pumps• Generator sets• Process & Utlility Pumps• Seawater Lift Pumps• Produced Water Pumps• Cargo Pump Systems• Water Injection Pumps
REFERENCES• Skarv Idun4 off Fire Water Pump Packages with each dedi-cated 2.8 MW generator set.Client: Samsung Heavy Industries.Operator: BP Norway.• Valhall Re-development3 off Line Shaft SWL Pumps.Client: Mustang Engineering.Operator: BP Norway.• Ekofisk 2/4L2 off Fire Water Pump Packages with each dedi-cated 2.8 MW generator set.2 off Sea Water Pumps with 325 kW electric sub-mersible motors.Client: SMOEOperator: ConocoPhillips
• Clair Ridge3 off Fire Water Pump Packages with each dedi-cated 1,6 MW lineshaft with diesel driver.Client: Amec.Operator: BP.• Hebron4 off Fire Water Pump Packages with each dedicated 2,4 MW generator sets and submerged motors.3 off 2,4 MW generator sets, Emergency (1) and Stand by (2).Total 7 whereof 5 generator sets are installed to the platform grid, and configured in the load shar-ing power distribution system.3 off Sea Water Lift Pumps with 1 MW electricsubmersible motors.7 off Cargo Pumps with 780 kW electric motor.2 off Sea Water Essential Pumps with 300 kWelectric submersible motors.Client: Worley Parsons.Operator: Exxon Mobile.• Edvard Grieg4 off Fire Water Pump Packages with each dedi-cated 2,2 MW generator set.2 off Sea Water Lift Pumps with 1,5 MW electricsubmersible motors.1 off Sea Water Lift Pump with 200 kW electricsubmersible motors.Client: Kværner Stord.Operator: Lundin Norge AS.• Eldfisk3 off Lineshaft Fire Water Pump packages with each dedicated 2,1 MW diesel driver.2 off Sea Water Lift Pumps with 1,5 MW electricsubmersible motors.Client: Aker SolutionsOperator: ConocoPhillips• Mariner1 off Essential Generator set enclosures with 5,5 MW motors1 off Emergency Generator set with 1,5 MW motorClient: StatoilOperator: DSME• Bergading2 off Fire Water Packages with angle gear in container.3 off Sea Water Lift Pumps with 760 kW electric submersible motors.Client: HHIOperator: Hess
Contact person: Tom GustavsenTitle: Director Sales & MarketingE-mail address: [email protected] website: eureka.no
ROTATING EQUIPMENT OTHER MECHANICAL EQUIPMENT
30
Fjords Processing
Fjords Processing provides world-leading well stream processing technology, systems and services to the upstream oil and gas industry. Our company delivers expert, cash-generating solutions for separation and treatment of oil, gas and water, based on innovative technologies and extensive competence accumulated over 40 years.
Our product range includes fluid stream separa-tion, oil and gas processing, and water treatment. In every project, our advanced technologies and expertise are combined in tailored solutions to meet customer specifications and on-site conditions.
Headquartered in Norway, Fjords Processing is a global provider with a local presence in the key oil and gas centers around the world, through our 600 employees in 15 countries on five continents.
We offer complete processing systems for both onshore and offshore installations.
OIL SOLUTIONS• Separators with Internals• Scrubbers with Internals• Vertical/ Horizontal Flow Electrostatic
Dehydrator• Electrostatic Desalter Systems• Compact Electrostatic Coalescer (CEC®)• Heavy Oil Treatment Products
WATER SOLUTIONS• Sulphate Removal Unit (SRU)• Liquid/Liquid Hydrocyclones• Compact Flotation Unit (CFU)• Desanding Hydrocyclones /Sandjetting System• Degassers• Mare’s Tail® Coalescer• Plate Interceptors• Mechanical Induced Gas Flotation (MIGF)• Hydraulic Induced Gas Flotation (HIGF)• Nut Shell Filters• Vertical IGF
GAS SOLUTIONS• Gas Dehydration (DEG, TEG, Molecular Sieve)• Compact TEG (Super Purifier)• Gas Sweetening• Hydrate Inhibition (HITTM)• MEG Reclamation Technology• MEG Re-concentration
SERVICES• Commissioning and start-up• Operational and on-site support• Spare parts management• Diagnostic analyses and studies• Solution design, modeling and testing• Process optimization and field revamp• Mechanical services• Environmental services• Standard training programs• Customized training programs
MIDSUND BRUK Midsund Bruk is a leading supplier of pressure vessels to the oil-and gas industry, owned by Fjords Processing, with an international reputation for excellence in design, on time delivery and high quality manufacturing of pressure vessels.
• Separators• Scrubbers• Knock-Out Drums• Receivers• Reactors• Columns• Contactors• Slug Catchers
REFERENCESIchthys FPSO Project- MEG Reclamation PackagePetronas FLNG2- MEG Regeneration UnitWest Nile Delta Gas Development Project- MEG Regeneration and SystemJohan Sverdrup TEG, separation, coalescers Egina Produced waterCatcher Produced water, water injection Kraken Water injectionMariner SeparatorsGina Krog Separators
Contact person: Kjetil Ulving -TufteTitle: SVP Business Development & CommunicationsE-mail address: [email protected] website: www.fjordsprocessing.com
TOPSIDES ENGINEERING TECHNICAL & PRODUCTIONSERVICES
PROCESS EQUIPMENT OTHER MECHANICAL EQUIPMENT
Offshore Oil Treatment Process Train
31
FMC Technologies
FMC Technologies Measurement Solutions is the market leader in the design, manufacture and supply of measurement products for the worldwide oil and gas industries.
FMC engineers have developed solutions that overcome the oil and gas industry’s most dif-ficult measurement obstacles. Through a deep understanding of the industry, unmatched product and system knowledge and the highest standards for performance, FMC Technologies Measurement Solutions puts the most daunting measurement challenges within reach.With over 2,000 installed projects in over 100 countries worldwide, FMC Technologies has unparalleled expertise in designing and constructing diverse liquid and gas systems that meet the needs of its customers.Our engineers and project management staff are experts, many with decades of experience in the measurement industry, and offer complete sup-port at every phase of the project’s development. Whether a project necessitates language transla-tions, compliance with non-standard regional practices or project commissioning in remote locations, FMC’s project teams have the know-how to solve any measurement system challenge.
PRODUCTSFMC provides total Measurement solutions, including:• Continuous and batch liquid metering. Export
(Custody transfer) metering on liquid (Crude, condensate)
• Inline LNG flow measurement
• Gas export and gas re-injection • On line Gas analysis• Fuel gas• Flare gas• Metering for all phases of test separators• Complete test separators including metering• Metering Control Systems• Multiphase metering, typically for well testing• Installation, Commission, Service, Operation and
Maintenance
SERVICESAs the global leader in custody transfer flow measurement, FMC Technologies now offers our consolidated Measurement CARE program: a comprehensive service that can be tailored to fit our customer’s exact needs. Measurement CARE helps to ensure the accuracy, reliability and regula-tory compliance of all measurement systems, regardless of manufacturer, throughout the equip-ments’ life cycle.
REFERENCESFMC Technologies Measurement Solutions has supplied more than 2,000 Measurement Systems installed in over 140 Countries and designed to all International & Domestic Measurement Requirements. Please contact us if you would like more information about these projects.
Contact person: Steinar HeggeliTitle: Managing DirectorE-mail address: [email protected] website: fmctechnologies.com/MeasurementSolutions
TECHNICAL & PRODUCTIONSERVICES
PROCESS EQUIPMENT OTHER MECHANICAL EQUIPMENT
32
FMC Technologies Multi Phase Meters
Multi Phase Meters is advancing multiphase and wetgas metering to new levels, to satisfy our customer’s needs and requirements. MPM’s headquarter is based in Stavanger, Norway, and is fully owned by FMC Technologies.
MPM supplies HighPerformanceFlowmeters that accurately measure multiphase and wetgas flow (oil, gas, water) at topside and subsea facilities. MPM takes great aim in supplying products that provide consistent high accuracy in real life applications.
MPM aims to serve customers in all relevant regions of the world and with this in mind has located sales and service centers in Dubai (UAE), Houston (USA), Milan (Italy) and Singapore. MPM subsea projects are managed from Kongsberg, Norway.
MPM’s patented technology platform as well as the MPM meter were developed and qualified in a close co-operation with 6 major oil companies.
PRODUCTSThe MPM HighPerformanceFlowmeter is made to measure the oil companies’ most valuable asset.It works, it’s accurate, it’s easy to use and it’s self-calibrating.• Topside: Topside MPM meters can be installed
at onshore and offshore sites. They are ideal for allocation metering, well testing and serve as important tools to help increase oil and gas production. They can be used instead of test separators, and be equipped with all of the unique features offered by MPM, like Dual Mode (combined wetgas and multi phase meter), water salinity measurement (automatic field configura-tion), Droplet Count and In-Situ verification.
• Subsea: MPM’s subsea meter encompasses all the features of the topside meter. It has a
uniquely simple field configuration procedure, without the need of any subsea sampling. It has been designed and qualified for use at water depths of up to 3 500 m (10 000 feet), at operat-ing pressures of up to 1 000 bar (15 k psi) and at operating temperatures of up to 250 °C (480 °F).
SERVICESMPM recognizes the importance of dedication and long term commitment towards our customers. The organization is finely tuned towards perform-ing high quality worldwide service and support. The high emphasis we put on this is reflected in our excellent customer satisfaction score.
With the highest standards in all aspects of com-mitment and a “hands-on” attitude, the people at MPM find the greatest pleasure in exceeding our clients’ expectations on all levels.
MPM offers a range of services related to training of operators and field personnel• Testing in MPM’s full-scale flow loop• Installation, commissioning and start-up assistance• Studies of metering applicability and design• Operational Integrity services with In-Situ verification
REFERENCESMulti Phase Meters has successfully delivered meters to a large number of projects around the world, operated by BSP, Chevron, ConocoPhillips, Dong, ENI, Esso, Gazprom, PDO, Shell, Statoil, Total.
Contact person: Bjørn L. PedersenTitle: Sales DirectorE-mail address: [email protected] website: fmcti.com
PROCESS EQUIPMENT
33
Force Technology Norway as
FORCE Technology is among the leading technological consulting and service companies in Scandinavia and internationally. We provides our technology and services globally.
FORCE Technology is organized as a neutral self-owning foundation where our profit must be re-invested in research and technology development. Since our origin as The Danish Welding institute in 1939, FORCE has developed into one of northern Europe’s leading research and technology hubs.FORCE is present in Norway, Denmark, Sweden, USA, Singapore, China and Australia and employ-ees more than 1300 skilled people.FORCE Technology’s operations within Oil & Gas contain several specialized technologies that focus primarily on servicing the offshore industry.FORCE Technology’s mission is to safeguard lives and assets in a sustainable manner and protect values that create values.
PRODUCTS• Vent gas monitoring systems• Fatigue Monitoring Systems.• Online Riser & Pipeline Monitoring Systems• Corrosion Protection-Modeling Systems.• Advanced NDTInspection and Verification for
topside and subsea applications.
SERVICESFORCE Technology can participate and provide technology and services from the very early feasi-bility study phase and all the way to the end of life of your offshore installation.Our highly skilled management, engineers and service teams provides the following applicable disciplines:• Asset integrity management• Structural design, verification, analysis, model-
ling and calculation services• Material and corrosion management• Cathodic protection design, verification,
management & services• Inspection, onshore, offshore and subsea
inspection and verification.• Training and certification• Calibration of Gas meters• Maintenance management• Pipeline integrity management and services.• Polymers – life time assessments, consultancy,
analysis and characterization• Destructive testing & root cause failure analyses
REFERENCESFORCE Technology has decades of proven track record of global supplies of both products and services to all major operators. Please contact us for further and detailed information of your particular interest.
Contact person: Leiv Erling GryttenTitle: Sales ManagerE-mail address: [email protected] website: force.no
TECHNICAL & PRODUCTIONSERVICES
OTHER MECHANICAL EQUIPMENT
34
Framo AS
Frank Mohn Flatøy AS is the production facility for the oil & gas and environmental activities within the Frank Mohn Group of companies.
In the international oil and gas industry we are recognized as a leading designer, manufacturer and supplier of complete pumping systems for both onshore and offshore applications, and for production of offshore oil recovery systems.All our products are factory tested and delivered to our customers ready for operation in the field.Frank Mohn Oil & Gas is dedicated to providing ourcustomers with world class reliable pumping systems engineered to meet their needs, both offshore and onshore. When your business needs a lift, talk to Frank Mohn Oil & Gas.
PRODUCTSOffshore and onshore pumping systems:• Electric submersible pumps, for sea water lift,
ballast, fire water service, crude cavern etc.• Fire Water Pumps, hydraulic and electrical driven• Booster integrated Water Injection Pumps
SERVICES• Aftermarket services• Engineering support
REFERENCESOn Floating production systems• 178 Fire water pump systems• 160 Electric submersible pumps• 43 Water injection pumps
Contact person: Frode Hjelmeland Title: Sales ManagerE-mail address: [email protected] website: framo.no
ROTATING EQUIPMENT
DRILLING SYSTEMS
35
Freudenberg Oil & Gas Technologies
Freudenberg Oil & Gas Technologies (FO>) is a global solutions provider of innovative seal solutions and differentiated seal products to the global oil and gas industry. The company is focused on the exploration and production (upstream) segment, and acquired Vector Technology Group in January 2013. Our 620 associates serve a wide range of customers including oil and gas producing companies, original equipment manufacturers (OEMs) and engineering and service companies that provide technologies, equipment and services for producing oil and gas from land based and offshore platforms throughout the world.
The Vector products and sealing technology are used in some of the most demanding appli-cations in oil and gas, including: offshore oil & gas platforms, FPSOs, refineries, riser and swivel applications, flowlines and subsea installations, and chemical and petrochemical plants. Featured products are the SPO Compact Flange, the TECHLOK Clamp Connector and the ROV-operatedOPTIMA Subsea Connector. Freudenberg Oil & GasTechnologies has locations in Australia, Brazil, Canada, Malaysia, Norway, Singapore, the UK, the United Arab Emirates, and the US.
A BROAD INDUSTRY KNOWLEDGEFreudenberg Oil & Gas Technologies’ high level oftechnical expertise, broad industry knowledge andproblem solving capabilities have earned industry wide recognition, helping to build close working relationships with customers whilst delivering high quality products and customised solutions on-time.In-house capabilities include; raw material stock,manufacturing facilities, coating, NDT and metrol-ogy equipment, pressure and hydro testing as well as complete pressure, bending and torsion testing facilities. In combination with an efficient supply chain FO> is able to deliver both flexible and fast track deliveries in addition to executing larger projects. Its products cover pressure classes up to 15,000 psi and have a proven track record within High Pressure / High Temperature and harsh environment applications where fatigue, high bend-ing and stress loads are of primary importance.
COMMITMENT TO CONTINUOUS IMPROVEMENTFreudenberg Oil & Gas Technologies is committedto designing and manufacturing the safest and most efficient sealing and pressure containment technology in the market. Setting HSEQ as the highest priority throughout a project, core focus is on product quality and development, the recruitment and retention of highly trained and competent personnel, continuous improvement and product installation support. In addition to its commitment to safety, reliability and technologicaldevelopment, FO> continuously aims to excel in order to meet or surpass its client’s expectations.
PRODUCT SUPPORTGood quality products need proper support.Accordingly we offer the following services:• Training courses including: Introduction,
Handling & Protection, Assembly/Disassembly, Bolting and Damage assessment
• Dimensional Inspection at customer’s locations or at FO> premises.
• Leak Investigation: FO> can help by giving an assessment of leaks, and solving the leak issues.
• Damage assessment & repair management• Leak Reduction Initiative: Supervising during• Fabrication, Construction and Commissioning
with respect to leak reduction. Reducing leaks and creating significant time saving, due to the reduction of repairs and modifications.
Contact person: Jon-Ivar AndersenTitle: Daglig leder/ General ManagerE-mail address: [email protected] website: fogt.com
PROCESS EQUIPMENT OTHER MECHANICAL EQUIPMENT
36
Gexcon as
GexCon AS is a world-leading company in the field of safety and risk management and advanced dispersion, explosion and fire modelling. GexCon’s software FLACS has become an industry standard, and is now the world #1 explosion simulator.
PRODUCTSFLACS - Dispersion, Explosion and Fire simulatorFLACS is one of the best validated tools for model-ing flammable and toxic releases in the technical safety context. FLACS is a comprehensive, yet easy to use, software tool for safety modelling consequences in full 3D. It is used extensively in the Oil and Gas and Process industries.
SERVICES• Safety consultancy• Safety training• Laboratories
Our Consultancy teams will help you identify all your hazards, understand your risks and contribute to improving your company’s safety performance. Process/Technical Safety and Risk Management• Dispersion Modelling• Explosion Modelling• Fire Modelling• Gas and Dust Explosion Safety Regulatory
Compliance• Occupational Health and Safety• Incident Investigation, litigation• Courses and training
At GexCon, all explosion tests and equipment testing, together with our experimental research is performed at the Laboratories Department in Bergen, Norway. Our test facilities include a well-equipped test laboratory and a large-scale test site.• Certification of Equipment Intended for Use in
Explosive Atmospheres – ATEX• Tests Related to Certification and Classification• Gas Explosion Mitigation Systems Testing, Design
and Certification and Dust Explosion Properties• Specialised Testing and Research
REFERENCESFLACS users:Statoil, BP, Total Petrochemical, ExxonMobil, GDF Suez, Petrobras, CNCP, Sinopec, PDVSA, FERC, HSL, Sandia, IRSN, EDF, DNV, Safetec, Lloyds Register, ABS, Baker Risk, ERM, WorleyParsons, Atkins, BMT, MMI, Saipem, CB&I, HQC, Technip
LNG references from GexCon Consulting:Explosion risk, Vessel layout and optimum safety design, safety gaps, risk calculation, gas detection optimization, spill consequence etc• Snøhvit LNG, Masala FLNG, Petronas FLNG2, #1
Generic FLNG (Shell FLNG), #2 Generic FLNG (Shell FLNG), #3 Generic FLNG (US oil com-pany), #4 Generic FLNG (US oil company), #5 Generic FLNG (Japanese engineering company), Livorno LNG FRSU, Facility siting studies (18 of a present total 21 US terminals)
Offshore vessels, safety studiesMany 100s of studies, using FLACS doing simula-tions and risk calculation. Also an increasing number of Onshore safety studies.
Incident investigation, litigation:Piper Alpha, Buncefield, TW800 Plane crash, Danvers Explosion, West – Texas Explosion, and 100s of more.
Experimental work/Laboratory testing:More than 30 years of experience, 100s of projects – both research/FLACS validation, but also contract work related to Explosion vent panels, Explosion drag load on PFP, explosion barriers, equipment testing and certification etc. Customers: Total, Statoil, engineering companiesand manufacturer of explosion proof equipment.
Contact person: Erik AadlandTitle: International Sales and Business DirectorE-mail address: [email protected] website: gexcon.com
TECHNICAL & PRODUCTION SERVICES
37
GLAMOX AS
Glamox is the world market leader in the manufacture and supply of lighting solutions to the global marine and offshore markets. The company is involved in lighting design and calculations, large installation projects and offshore maintenance and modifications.
The company’s business area is represented glob-ally through its own sales units in Norway, Finland, Germany, Netherlands, Dubai, Singapore, China, Korea, Canada, USA and Brazil. The Group owns a range of quality lighting brands including Glamox, Aqua Signal, Luxo, Høvik Lys and Norselight. Glamox GMO head office is located in Oslo, Norway.
PRODUCTSComprehensive portfolios of conventional and LED lighting solutions;Outdoor lighting• Hazardous area and safe zone• Flood lights and Area lights• Standard & Emergency lightsIndoor lighting• Hazardous area and safe zone• Control & Technical rooms• Accommodation & Public areasDesignated areas• Searchlights• Navigation lights• Helideck lights• Signal lightsLighting Software• OptiWin - from a simple area to full 3D render-
ings - Design/Calculations• PDMS plug-in tool – combine your modelling
with OptiWin lighting design
SERVICESComplete product range that fulfills with all inter-national codes and standards. Local market knowledge with agents & distributors worldwide.On-site technical support and international net-work of after sales and services.Lighting design and light calculation service with added services such as TCO/ROI.
REFERENCES• ENI E&P• Fred Olsen Energy• Transocean• Statoil• Shell• Total E&P• BP• BW Offshore• Seadrill• National Oilwell Varco• Stena• COSL• Songa• Odfjell
For detailed references contact your nearest Glamox office.
Contact person: Ola WiikTitle: Vice President Oil & GasE-mail address: [email protected] website: glamox.com/gmo
ELECTRIC/AUTOMATION/TELECOM
38
GMC HVAC AS
GMC HVAC has been a major HVAC supplier to the Norwegian Oil & Gas market since 1988. The company is involved in large installation projects, offshore maintenance and modifica-tions, and the supply of ductwork and equipment. GMC HVAC is currently employing a total of approx. 100 skilled people with experienced Senior personnel, HVAC engineers, Technicians and operators. Most of them have offshore certificates and long experience in offshore work. Our in-house document control centre keeps us up to date towards require-ments from operators and clients.
Our goal is to be the preferred supplier of HVAC services for new and existing installations on the offshore market.
The culture of the company is characterized by continual work for improvement, achieved through coordination of expectations and requirements from customers, employees, authorities and owners.
GMC HVAC is part of the GMC Group consisting of 7 companies offering services and products to the oil and gas-, and shipping industry. The group are currently employing approximately 300 persons.
When in need of a partner or supplier with the highest level of experience in providing HVAC solu-tions to the oil and gas industry, GMC HVAC is an excellent choice.
Our Quality System is certified according to NS-EN ISO 9001:2008 manufacturing /supplying the fol-lowing products/ services: Front End Engineering and Design, Detail Engineering and design, Equipment delivery, Installation, Mechanical Completion, and Commissioning of all type of HVAC systems. We are also certified according to OHSAS 18001
Our HSE / Quality policy shall be carried out by having focus on safety, quality and communication with customer and the ability to deliver. We have our Achilles registration no. 950093617 Id. 15391 and our Sellicha reg.no 106066
GMC HVAC delivers a full range of HVAC, Cooling and Refrigeration equipment, and is an expert on bespoke products for harsh environments, i.e. our
own in-house developed air conditioning systems, Simvent, delivered to drilling rigs worldwide. We have our own Refrigerant Department currently consisting of two engineers and four technicians.
In our workshop, we have specialized in acid proof stainless steel, and manufacture welded ductwork and plate constructions according to our customers’ specifications.Our duct system, SIMDUCT® is manufactured in accordance to NORSOK, IMO and ISO 15138. Our products can many times be an excellent alternative, saving both weight (approx.. 70%) and installation time (approx..35 %) compared to conventional, welded galvanized ductwork. The LCC (Life Cycle Cost) is NOK 0, - zero -. Compared to conventional duct systems the savings are substantial.
GMC offers a full range of HVAC related services; our scope of delivery can include but not be limited to all type of Engineering and Design within HVAC, Procurement, Equipment delivery and Installation of new HVAC systems.
We do also troubleshooting and maintenance, repairs and modifications on existing HVAC instal-lations, cooling and refrigeration plants.
An important aspect of our contracts is also to take responsibility for the Mechanical Completion, Commissioning and final Documentation for the installations
An important aspect of our contracts is also totake responsibility for Mechanical Completion,Commissioning and final Documentation.
Contact person: John-Erik OlstadTitle: Business Development ManagerE-mail address: [email protected] website: gmc.no/gmc-hvac/category497.html
OTHER MECHANICAL EQUIPMENT
DRILLING SYSTEMS
39
Harding Safety AS
Harding is one of the leading manufacturers of lifesaving equipment. Headquartered in Norway with offices worldwide, we offer the world’s largest service network for lifesaving equipment.
Our range of equipment is known to be highly innovative and in front of rules and regulations. Harding was estab-lished in 2013 when Noreq and Schat Harding was joined together as one com-pany in order to form the world’s leading supplier of lifesaving equipment.
PRODUCTSHarding offers a full range of lifeboats, rescue boats and belonging davits for the marine and off-shore industry. We aim to be leading in delivering the latest technology and innovation has a high priority within our company.We offer free fall lifeboats according to the latest regulations and Harding’s lifeboat, FF 1200 holds a world record with its successful drop from 65,1 meters. FF 1200 was also the first lifeboat to meet the new regulations for the North Sea, DnV-OS-E406. Harding is the company behind the totally enclosed lifeboat davit concept and ship owners and yards world-wide because of their safe opera-tion, easy installation and product lifetime prefer our davits.Because of our broad range of lifesaving equip-ment we can offer our products to any ship and rig in world-wide operation. We are located where our clients are and we take pride in being competitive
on delivery times as well as commercial terms and, not the least, quality.
SERVICESWith more than 60 service stations, Harding offers the world’s largest service network in our industry. With nearly 200 service engineers, we stand ready to assist our clients at any location.
REFERENCESAker Solutions BP ConocoPhillips Daewoo Heerema HyundaiKeppelFels Modec Odfjell Drilling Perenco Saipem Samsung Seadrill Shell Statoil Subsea7 Transocean
Contact person: Bjørn Sturle HillestadTitle: Sales & Marketing DirectorE-mail address: [email protected] website: harding.no
SAFETY EQUIPMENT
40
Hernis Scan Systems as
HERNIS Scan Systems AS is a world leader within high quality Closed Circuit Television (CCTV) systems for hazardous, corrosive and high-risk environments. We are geared towards tailored system designs based on specific project demands. Our employees have extensive experience in project development and are uniquely qualified to provide oil & gas industry engineering companies and operators advice on CCTV systems. The systems are well documented and supported, and are supplied to discerning customers operating in the coldest deserts of the arctic to the hottest deserts around the equator.
Contact person: Jan KristensenTitle: HAC Regional Sales Director, EMEAE-mail address: [email protected] website: hernis.com
ELECTRIC/AUTOMATION/TELECOM SAFETY EQUIPMENT
DRILLING SYSTEMS
Since 2012 HERNIS is a part of the Eaton Corporation, a global technology leader in diversified power management solutions that make electrical, hydraulic and mechanical power operate more efficiently, effectively, safely and sustainably.
COST EFFECTIVE SOLUTIONS DESIGNED TO DE-RISKWe offer:• complete, compliant CCTV systems• explosion proof solutions with all relevant
certification• advanced analytics systems, such as oil spill
detection• Our packages cover:• needs assessment• initial design• engineering• manufacturing• installation and testing• supply of detailed documentation
OUR SERVICES• Engineering• Manufacturing• Testing• Installation supervision• Commissioning services• After sale services throughout the
product life cycle
A SELECTION OF OUR REFERENCES• BP• BW Offshore• Chevron• Golar• Luke Oil• NOV• Petrobras• Rosneft• Statoil• Sevan• Shell• Teekey• Total
41
Hitec Products AS
Hitec Products AS design and manufacture high quality Electro-Hydraulic control systems and Chemical Injection Units for the Oil & Gas Industry. We are organised in four divisions: TOPSIDE SYSTEMS, SUBSEA SYSTEMS, OILFIELD SYSTEMS and CUSTOMER SUPPORT.
We have a project-oriented organisation with a culture for succeeding and exceeding our clients’ expectations. Our production facilities are in Stavanger, Sandnes, Forsand and Singapore, including a deep-water quay and facilities for large module assembly. We are also present with sales and engineering offices in Telemark, Norway and Lowestoft, UK.
PRODUCTSHighly innovative electro-hydraulic control and chemical injection systems with a modular and stan-dardized approach in design. We have high focus on user interface and safety. Our systems include:• IWOCS - Installation Workover Control Systems
with HPU• Operator Control Room for Workover Systems• HPU - Hydraulic Power Units for Production /
Subsea, Ballast, Wellhead and Drilling• TFHPU Test & Flushing Hydraulic Power Units• SCMTS – Subsea Control Module Test Stand• TUTU – Topside Umbilical Termination Unit• WHCP – Wellhead Control Panel• CIU – Chemical Injection unit
• MIU – MEG / Methanol Injection Unit• FCP w/IRCD – Flow Control Panel w/ Injection
Rate Control Device• LCP – Local Control Panels• Instrumentation for Xmas threes• Accumulator Packages
SERVICESHitec Products assists in all stages of your project, including FEED assistance, project management, Engineering & Design, 3D modeling and real life prototyping, procurement, manufacturing and test-ing. Our Customer Support centers provide service and solutions to ensure immediate and long-term satisfaction to clients worldwide. This include Surveys & Inspections, Modification & Maintenance, re-certifications and supply of spare parts.
REFERENCESHitec Products have enjoyed working with our clients on more than 1000 projects. Our clients include the major oil companies, smaller independent oil com-panies and engineering companies, as well as key players in the subsea, oil service and FPSO market.
Contact person: David SouthTitle: Sales & Marketing ManagerE-mail address: [email protected] website: hitecproducts.no
ELECTRIC/AUTOMATION/TELECOM
42
IKM Testing
IKM Testing, with 1000 employees, is a company within the IKM Group and is a global multi-discipline supplier of pipeline-, drilling-, mechanical completion- and commissioning services to the oil & gas industry.
IKM Testing has its head office at Sola, Norway and international departments in UK, Canada, Spain, Brazil, Poland, Australia, Singapore, Indonesia, Thailand, Malaysia, Korea and Mexico.
SERVICESNitrogen services• N2/He Leak testing• Nitrogen purging / -foaming• Pipe freezing• N2 gas liftTesting/Plugging• Pressure and vacuum testing• Plugging Services• Riser annulus testingCleaning• Cleaning in place (CIP)• Chemical cleaning• Oil flushing/oil cleaning• Hydrojetting• HVAC cleaning• Tank-/Vessel cleaning• Preservation
• Decommissioning• LRA/NORM handlingInspection• Video inspection• Tank inspection• RPAS-/UAV inspectionMachining On-Site• Cold cutting• Flange facing• Hot-/cold tapping• Conductor cuttingCertification/Maintenance• Certification of accumulators• Maintenance of heat
exchangers• PSV Calibration On-siteFlange Work• Flange Management• Bolting work services• Hot bolting• Flow coding / labelling / taggingPipeline services• Pigging /pipeline services/
RFO / PCO• Umbilical testing/cleaning• Subsea spools commissioning
• Subsea template/manifolds FAT• Pig Tracking/ Isotope servicesDrilling services• Cuttings transport System (CTS)• Scale squeeze inhibition• Acid stimulation servicesTraining courses• Bolt tensioning (OLF118)• Valves (OLF 119)• Hot Bolting Services• Plugging services• Compact flanges• Pressure testing• Hot oil flushing• HydrojettingRental• Pumps and tanks• Inspection equipment• Bolt working equipment• Drying and filter units• Flanges and plugs• Air compressors• Testing equipment• Hydraulic hose reels• Hot water cleaners
Contact person: Jens BolmeTitle: International Sales & Marketing DirectorE-mail address: [email protected] website: ikm.com
TECHNICAL & PRODUCTION SERVICES
REFERENCES IKM Testing has extensive experience supplying services to large scale projects including FPSO’s, drill ships and drilling rigs worldwide.
A complete reference list is available upon request.
43
Imenco
Imenco is a major sub-contractor to the maritime industry. We design, develop and produce a wide range of products within Lifting & Handling, Subsea guiding systems, Subsea cameras and tools, surveillance systems and helicopter refueling units. 30 years of experience gives our customers added value and smart solutions. Our engineering team is specialized in the area of mechanics, hydraulics and electronics engineering. We provide services for some of the world’s leading oil companies and contractors. Imenco is approved by Achilles and DNV-GL, holding a 9001 Quality Management System Standard.
PRODUCTS• Subsea Guiding Systems & Products• Special Subsea Tools• Lifting & Handling• Subsea Cameras, lights and laser• Aviation Fuel Systems• Surveillance CCTV• Diving Systems
SERVICES• Engineering and development
REFERENCESImenco delivers more than 20 tailored helicopter refueling systems pr year and a varity of subsea products and systems.
Contact person: Geir Egil ØstebøvikTitle: CEOE-mail address: [email protected] website: imenco.com
MARINE ENGINEERING & MOORING DESIGN TECHNICAL & PRODUCTION SERVICES
ELECTRIC/AUTOMATION/TELECOM CRANES, LIFTING & MOORINGS OTHER MECHANICAL EQUIPMENT
SELECTED REFERENCESProject Client Technology
Ichthys Aker Subsea Guide Poste ExtensionMoho TLP Hyundai Guide Wire Winch SystemP55 Petrobas Riser Pull-in SystemEkofisk SMOE Helifuel SystemIchthys Samsung Helifuel SystemPipeline Repair Systems Statoil Hot Tap TeesPipeline Repair Systems Statoil Remote Operated Welding HabitatVarious Deep Ocean Subsea Cameras and ToolsAlvheim FPSO Technip / Marathon Truster Replacement System
44
Jotne E&P
Contact person: Alexander Loe FredenfeldtTitle: Project DirectorE-mail address: [email protected] website: jotne.no
TOPSIDES ENGINEERINGTECHNICAL & PRODUCTIONSERVICES
PROCESS EQUIPMENTOTHER MECHANICAL EQUIPMENT
DRILLING SYSTEMS
Jotne is an EPC company, providing a complete product range within drilling fluid systems, subsea structures/manifolds, process modules/skids and advanced CNC Machining. We have a dedicated engineering division, with flexible and multidiscipline engineers. Making Jotne the efficient choice for low cost and fast track projects. All products certified according to ABS, DNV GL, BV or any other third party. Jotne have its own fabrication facilities, including a dry dock.
PRODUCTSDrilling Fluid Systems and process equipmentJotne offers leading technology and complete packages, equipment and engineering within Drilling Fluid Systems/Mud Systems. Our focus is on reliable and easy maintainable products to reduce cost and increase operability. Our portfolio consist of the following product segments:• Mud Mixing and Additive Systems• Mud Storage Equipment• Mud Treatment System/Solids Control• Bulk Storage System• HP Manifold Systems• HP Pump Systems• LP Pump Systems• Mud Control System
Subsea Manifolds and structuresEPC supplier for subsea structures and manifolds. We have our own fabrication facilities with a dry dock that makes logistics easy for handling larger projects. We are a small organisation, making us a flexible company, improved delivery and decreased cost.
Rig Upgrade projectsJotne deliver complete EPCI projects for rig upgrades. Offshore surveys to advise system upgrades, maintenance or repairs. Study reports and documentation for details description of modifications and upgrades. Projects include fab-rication and delivery of equipment (incl. valves and instrumentation), installation and commissioning.
Process skids and modulesWe supply engineering and fabrication for process and utility systems like chemical injection units, water treatment units, MEG units, TEG packages, pump packages, power units and other related systems.
SERVICESEngineering and design• Engineering (subsea and topside)• Mechanical and piping engineering• FEED studies, Detail engineering• Structural analysis• Procurement• QAFabrication and assembly services• Structural fabrication• Piping fabrication• E&I installation• Assembly and testing• Pressure testing• Surface protection• MachiningMechanical completion and Upgrade projects• Installation, testing and commissioning• Upgrade and modification projects
· Service agreements· Modifications and maintenance· Offshore surveys
SELECTED REFERENCESProject Client Technology
Norne Statoil FEED, subseaNjord A Statoil Subsea Manifolds Svalin Statoil PLEMs, PLETs and PLRsGina Krogh Kongsberg PLRsVigdis Statoil FEED, subseaBalder EXXON Subsea manifoldMartin Linge Technip IngeniumMariner Eureka Engineering, fabrication assembly
45
Jotun Performance Coatings
The Group has 68 companies and 33 production facilities on all continents. Jotun is represented in over 90 countries. We supply paints and coatings that have been specially developed for unique conditions. The world of Jotun is diverse, but we have one common agenda: Jotun Protects Property.
PRODUCTSJotun is a leading manufacturer and supplier of high performance coatings. Specialties are corrosion protection and passive fire protection of offshore installations and structures as well as protection and decoration of concrete and advanced antifouling technologies. We offer a wide range of specialty products coupled with expertise and guidance in selected business areas like:• Offshore• HPI (Hydrocarbon Processing Industry)• Energy• Infrastructure (airports, buildings, bridges)• Mining• Tankcoatings• Drydock• SeaStock• Newbuildings• Waterballast tanks
Throughout the lifecycle of a construction, Jotun is on hand to give technical advice and assis-tance so that you achieve the most effective and economic coating protection and performance. Jotun products have been proven in use in any condition in the world, supported by an unrivalled standard of technical service. The Jotun range of coatings offers protection for ever part of a steel and concrete object large or small, in service, in any trade, around the world.
SERVICES• Certified coating advisors• More than 1000 coating advisors around the world• High level of education and experience
REFERENCESJotun Performance Coatings is a leading Global supplier.For references contact your nearest Jotun office.See www.jotun.com
Contact person: Frank NordbyTitle: Vice President MarketingE-mail address: [email protected] website: jotun.com
SAFETY EQUIPMENT
46
K. Lund Offshore
Contact person: Robert NielsenTitle: VP CompressorsE-mail address: [email protected] website: kl-offshore.no
CRANES, LIFTING & MOORINGS ROTATING EQUIPMENT
CENTAC Centrifugal Air Compressor – by K.LUND Offshore
K.LUND Offshore is a strong and dependable supplier of compressors and lifting equipment for the Norwegian and international oil and gas industry. We reside in Sola, Norway, where we manufacture the following according to the oil-companies specifications:
• Compressors• Air dryers• Winches• HPU• Air hoists
PRODUCTS• Compressors and dryers for air and gas.• Lifting equipment, Air and Hydraulic.• Rental of Lifting Equipment
SERVICES• Service of compressors in workshop and offshore• Service and certification of lifting equipment in
workshop and offshore
REFERENCES• Statoil• Aker Solution• Kvaerner• Aible• Shell• ConocoPhillips
• Texaco• ExxonMobile• BP• Petrobras• Sakhaline Energy• Marathon• Agip/ENI• Nexen Petroleum• Det Norske• Total• Lundin• Aker Solution• Technip• Able• Hundai Heavy Industries• Samsung• Daewoo• CB&I.• AMEC• Deutag• Transocean• Seadrill• Subsea 7• Archer
47
Kongsberg Maritime
SOLUTIONS FOR MERCHANT MARINE, OFFSHORE AND SUBSEAKongsberg Maritime provide innovative and reliable solutions for on- and offshore, mer-chant marine, subsea, navy, coastal marine, fisheries, simulation & training, port & harbour surveillance, wind energy and more.
PRODUCTSKongsberg Maritime deliver systems for dynamic positioning and navigation, marine automation, safety management, cargo handling, subsea survey and construction, maritime simulation and training, and satellite positioning. Our solutions enhance efficiency and safety throughout the whole maritime technology spectrum and we offer additional competence in providing turnkey engineering services within the shipbuilding and offshore production sectors.
• Bridge systems• Camera Systems• Deck systems• Engine room and automation systems• Information and safety systems• Naval systems
• Onshore systems• Process control systems• Sensors and Transmitters• Simulators• Subsea systems• Tank gauging and measurements
SERVICESKongsberg Maritime is focused on integration and interface engineering through a global execution within the electro, instrument and telecom disciplines as follows:
• Electric power distribution system• Safety shutdown system• Fire & gas detection systems• Integrated control & safety systems• Navigation & positioning• Telecommunication & IT
• Marine systems• Field instrumentation• Global project execution • Global customer support and training centres• Operational support
REFERENCES• More than 4000 offshore vessels with
Kongsberg Maritime products and systems• More than 16000 merchant vessels with
Kongsberg Maritime products and systems
Contact person: Cato FranckTitle: Vice President LNG & Offshore Production UnitsE-mail address: [email protected] website: km.kongsberg.com
TOPSIDES ENGINEERING
ELECTRIC/AUTOMATION/TELECOM
DRILLING SYSTEMS
48
Lloyd’s Register Consulting
Lloyd’s Register Consulting (LR Consulting) provides specialist expertise and practical guid-ance that help companies to operate safely and profitably. We support owners, operators and supply chains of complex, high-risk and capital intensive assets throughout the life cycle.
By identifying risks, problems and challenges before they materialise, we enable clients to mitigate risk up front. This facilitates savings through optimised designs and more efficient processes. But the most significant savings are in the accidents that are prevented through a safer operation.
LR Consulting builds on the strong heritage of Scandpower, Lloyd’s Register ODS and Human Engineering and draws on more than 250 years of experience from Lloyd’s Register in assisting clients with technical and organisational matters.
Our services are delivered from offices around the world, including Norway, Sweden, Denmark, USA, Brazil, China, UK, UAE, Korea, Malaysia, India, Japan, and Singapore. Today we have around 450 experts delivering services to the global market, including oil and gas, nuclear power industry, marine, railway and other industries.
PRODUCTSLR Consulting has extensive competence, capacity and software tools within all product areas related to HSE, quality, asset and risk management and engineering dynamics.• Risk Spectrum PSA software, risk assessments
(fault tree and event tree)
• RiskWatcher BOP, tool for online assessment of BOP reliability
• COSAC, a software tool for offshore concept safety assessment
• BLOWFAM, a software tool for estimating blow-out frequencies
• DROPHY, an interactive tool for systematically assessing risk of dropped objects
• WINDCHILL, an interactive tool for operations to assess exposure of outdoor workplaces related to cooling
• GASDETECTOR LAYOUT, a software tool for optimizing gas detector layout (location and number of units) for topside process modules
• ESCAPE is a SW tool for analyzing impairment of escape due to smoke and heat from fires.
SERVICESOur services include:• Risk based management• Risk assessments/QRA• Technical safety and consequence modeling• Reliability and asset performance• Human factors and work environment• Engineering dynamics• Noise and vibration predictions and measurements• Cyber security and intergraded operations
Contact person: Jan Reier HuseTitle: Vice PresidentE-mail address: [email protected] Company website: lr.org/consulting
TECHNICAL & PRODUCTIONSERVICES
REFERENCES
Project Client Services
Johan Sverdrup Aker Solutions/Aibel QRA, Working environment analyses, Reliability assess-ments/SIL documentation, Human Factors
Hebron Worley Parsons/Exxon CFD consequence assessments (Dispersion, Fire and explo-sion, Helideck availability, Exhaust contamination for working environment)
Gina Krog Aker Solutions/DSME QRA, Working environment, Human factors and reliability/SIL Peregrino FPSO Maersk FPSO/Statoil QRA, Safety Case, HAZOP, Reliability/SIL
49
LMG Marin
LMG Marin is an independent marine engineering company offer design and engineering of offshore ships and floaters, providing complete package solutions for the vessels. LMG Marin celebrated its 70th anniversary in 2013, and references covers more than 1000 ships and floaters built at shipyards worldwide.
The company has main offices in Bergen, Norway, and branch engineering offices in Poland and France, in addition to representation offices in many countries.
PRODUCTSLMG Marin has long experience in providing inno-vative and reliable solutions for the upstream and downstream industries, such as:• Deepwater drillships: LMG pioneered the
development of the harsh environment drillships leading to the delivery of the “Navis Explorer 1”. LMG Marin has currently design and engineering responsibility for the delivery of 14 drillships during 2015 – 2019
• FPSOs and FPSO/D: LMG Marin provides design of FPSOs and has developed a unique FPSO with drilling capabilities - the Sea Twin FPSO/D
• Gravity based LNG terminals: LMG Marin has facilitated the development of a gravity based LNG terminal for shallow water installations, based on cost effective fabrication at a shipyard and to be towed, and finally installed fully outit-ted at the seabed.
• Floating LNG and el.power systems: LMG Marin provides several solutions related to floaters for
offshore LNG processing and facilitate integra-tion into a complete LNG supply chain.
• LNG powered ships: LMG Marin has become a leader in the design and engineering of LNG powered ships, currently with 18 units in opera-tion or under construction.
SERVICESLMG Marin provides design and engineering services with most types of floaters and ships, such as:• All naval architectual disciplines• Hydrodynamics• Structural analysis• Systems engineering• Mechanical• Electrical and instrumentation• Integration of design disciplines• Fabrication preparation• Project Planning and management
REFERENCESDrillships Navis Explorer 1 (now Belford Dolphin”), 14 drillships under construction. FPSO conver-sions, FPSO design, several LNG powered ferries
Contact person: Geir KjersemTitle: Managing DirectorE-mail address: [email protected] website: lmgmarin.no
MARINE ENGINEERING &MOORING DESIGN
50
Marine Aluminium
Marine Aluminium is an internationally recognized supplier of innovative and sustainable access solutions. The company is world leading EPC supplier of various aluminium struc-tures for on and offshore installations and for the shipbuilding industry.
The company has more than 60 years of experi-ence working with aluminium, with particular competence in the fields of material technology, extrusion tooling and welding techniques. Marine Aluminium operates close to key markets, with modern production facilities in Norway and China. Important markets are in Norway, Korea, Brazil, the Middle East, Asia, Europe and the USA.
PRODUCTS• Telescopic gangways• Helidecks for Offshore vessels, semi-subs
and platforms• Marine and Offshore Access Systems • Handrail, Walkway & Stair Tower systems • Elevator Shafts & Modules• FlexiBarriers, protection of personnel
and equipment • FSW Panels• Modules/containers purpose built for
accomodation, offices, workshops and storage• Telescopic gangway rental service
SERVICES• EPC contracts• NDE services• Inspections• Maintenance• Modifications• Product training• Rental of telescopic gangways
MODELL• JSM deck #1. Helideck for FPSO, Chevreon• JSM deck #2. Helideck for FPSO, Chevreon• Goliat. Helideck for FPSO, Eni• SM 434. Helideck for FPSO, Sevan Marine• Petrojarl Ciadade de Rio das Ostras. Helideck for
FPSO, Petrojarl• Hummingbird. Helideck for FPSO, Sevan Marine
Contact person: Arild FrøkedalTitle: Sales DirectorE-mail address: [email protected] website: m-a.no
TOPSIDES ENGINEERINGMARINE ENGINEERING &MOORING DESIGNTECHNICAL & PRODUCTIONSERVICES
SAFETY EQUIPMENTOTHER MECHANICAL EQUIPMENT
REFERENCESA selection of our references is given below: Please contact Marine Aluminium for a full list of references:
Project Client Services
Edda Fortis Østensjø Rederi Telescopic Gangway 57mBorgsten Dolphin Dunbar Dolphin Drilling Telescopic Gangway 44mFloatel Victory Floatel International Telescopic Gangway 45,5mHOS Achiever Hornbeck Offshore Telescopic Gangway 23,4mGoliat FPSO ENI Norway NORSOK helideckEldfisk 2/7S ConocoPhillips NORSOK helideckPosh Endurance PAXOCEAN Marine helideckREM Pioneer REM Maritime Marine helideckGoliat Statoil EPCI Access systems
Olympia, Gran Energia. Helideck and Telescopic gangway delivered by Marine Aluminium
51
Marine Cybernetics
Marine Cybernetics functions as a third-party between the customer and the system provider, making us an independent tester and verifier. We use our CyberSea technology to perform Hardware-In-the-Loop (HIL) testing to verify practically any control system for errors and robustness in the Maritime and Offshore Industry.
PRODUCTS• Drill-HIL• PMS-HIL• DP-HIL• ESD-HIL• Crane-HIL• SPT-HIL• BOP-HIL• VMS-HIL• MPD/DGD-HIL• BOP-HIL• Dynamic Capability Analysis• Cybersecurity and network resilience Testing
SERVICESProviding Third-party Hardware-in-the-loop (HIL) testing technology to be used on control system software.
REFERENCESMarine Cybernetics has been setting the industry standard for more than 10 years with an extensive and systematic database of test cases and test results. We are proud to have a track record for more than 150 vessels and working closely with satisfied customers. A complete reference list is available upon request.
Contact person: Ryanne JasminTitle: Marketing ManagerE-mail address: [email protected] website: marinecybernetics.com
TECHNICAL & PRODUCTIONSERVICES
52
MHWirth
MHWirth delivers oilfield products, systems and services. Our knowledge and technologies span from reservoir to production and through the life of the field.
MHWirth is a leading global provider of first-class drilling solutions and services designed to offer our valued clients with the safer, more efficient and reliable alternative. Our company vision is centered on an unparalleled commitment to quality and yielding economic advantages for our customers and stakeholders. With a remarkable legacy founded more than a century ago, MHWirth has transformed into a new brand reflective of our robust company strategy and compelling ambitions. Our reputation is pre-served through a winning combination of values, people and innovative technologies, proven by a respected track record and a vast collection of customer success stories.
PRODUCTS• Global Concept Designs• Structures and Traveling Equipment• Drilling• Make and Break Equipment• Handling Equipment and Cranes• Motion Compensation Systems• Control and Monitoring• Drilling Fluid Processing and High Pressure
Manifolds• Drilling Risers and Managed Pressure Drilling
SERVICESSupport and Services throughout the lifetime of the products we deliver; • Spare parts• Service
• Overhaul• Training• Product Support• Performance Optimization• Condition Based Maintenance and Service
Development
REFERENCESComplete Drilling Equipment Packages - our Major Project deliveries
Drillships1. Guarapari, Jurong Shipyard2. Tungsten Explorer, Daewoo Shipbuilding3. Deepwater Invictus, Daewoo Shipbuilding4. Deepwater Asgard, Daewoo Shipbuilding5. Dalian Developer, Cosco Shipyard
Semi-Submersibles1. Songa Encourage, Daewoo Shipbuilding2. West Mira, Hyundai Heavy Industries3. Sevan Developer, Cosco Shipyard4. Songa Endurance, Daewoo Shipbuilding5. Songa Equinox, Daewoo Shipbuilding
Jackups1. Central Shipping Monaco 1, Yantai CIMC
Raffles Offshore2. Central Shipping Monaco 2, Yantai CIMC
Raffles Offshore3. Coastal Contracts 1, CIMC Raffles Offshore4. Coastal Contracts 2, CIMC Raffles Offshore5. Maersk Reacher, Resolve, Resolute and
Resilient, Maersk Contractors
Contact person: Øystein BondevikTitle: Vice President Major ProjectsE-mail address: [email protected] website: mhwirth.com
TOPSIDES ENGINEERING TECHNICAL & PRODUCTIONSERVICES
CRANES, LIFTING & MOORINGSROTATING EQUIPMENTOTHER MECHANICAL EQUIPMENT
DRILLING SYSTEMS
53
Minox Technology
Minox Technology is the leading provider of deoxygenation solutions bringing state of the art technology to the IOR water injection market worldwide. Although our activities are primarily targeted towards international oil companies, we also design and develop water treatment equipment for the onshore and offshore processing industries.
PRODUCTSThe Minox Deoxygenation process is a gas stripping process where ultra-pure nitrogen gas is used to remove dissolved oxygen from water without the use of oxygen scavenging chemicals. The Minox process can be designed to meet any practical demand for reduction of oxygen content in water, and is recognized by the industry as the most efficient way to deoxygenate water.
The Minox Deoxygenation system is the market leader in footprint and height and has 30 to 70% less weight than competing technology. Minox make two products within deoxygenation which are Minox®Compact and Minox®Tower. One of our current new developments is Minox®DryGas, an innovative, compact and lightweight system for dehydration of natural gas.
The Minox Process• State of the art technology for IOR water injection• No chemicals (oxygen scavenger) needed to
meet required specifications• Low weight• Small footprint and height• Flexible in design and capacity• Operates on positive pressure• Wide operational range• Non-hazardous area application• Field proven technology• More than 20 years experience
SERVICES• We provide and deliver:• Upgrades of existing systems • Start-up and commissioning services • Spare Parts • Remote Plant Condition Monitoring• Training Programs• Inspection & Maintenance Agreements
Contact person: Bjørn Einar BrathTitle: CEOE-mail address: [email protected] website: minox.no
TECHNICAL & PRODUCTIONSERVICES
PROCESS EQUIPMENT
LATEST REFERENCES
Project End Client/Operator
Capacity BWPD Performace PPB
Delivered Year
Minox Gen.
Egina/Nigeria Total 2 x 251 000 20 2016 4thHebron/Newfoundland ExxonMobil 2 x 189 000 10 2014 4thClov/Angola Total 280 000 30 2013 4thTahiti/Gulf of Mexico Chevron 100 000 20 2010 4thSture/Onshore Norway Statoil 3 000 20 2009 4thSumandak II/Malaysia Petronas 55 000 20 2007 TowerUrsa/Gulf of Mexico Shell 240 000 20 2007 4thAgbami/Nigeria Chevron 2 x 225 000 10 2005 4th
54
Moss Maritime a.s
Moss Maritime is a leading designer and provider of licensed technology for innovative floater designs for both exploration and production facilities and for solutions within the LNG industry.
Moss Maritime develops and delivers leading technology, advanced floating production solu-tions and expert engineering support and services to offshore oil and gas developments world-wide.The company is located in Oslo and has an office in Houston. The company is part of the Saipem Group which gives access to broad global resources and to supplementary engineering services.Moss Maritime delivers technologies and services and undertakes projects with design and engineer-ing within the following business areas:• Exploration and Drilling floaters• Floating Production Units• Supply and Service Vessels• LNG Technology• Arctic and Green Technology
PRODUCTSExploration Units and Service Vessels• Moss Maritime CS-series of catamaran semi-
submersible drilling platforms• Supply and service vessels Floating Production Units and Terminals• Conventional semi-submersible production
platform
• Octabuoy deep draft dry-tree semi-submersible with storage capabilities
• Octopus FPSO – axis-symmetrical octagon-shaped purpose-built floater design which also may be used for other applications such as drilling rig or floating LNG (FLNG)
• Ship-shaped FPSO/FSRU/FLNGArctic Environmental Units• Arctic drilling platform solutions including
semisubmersible, drillship, axis-symmetrical Octopus, shallow-water ship-shaped jack-up
• Icebreaking ship-shaped FPSO/FPU• Icebreaking LNG carrier• Icebreakers
SERVICESMoss Maritime delivers a comprehensive and wide range of design, expert engineering and technical support and services including:• Concept-, feasibility- and FEED studies• Detail engineering• Life extension engineering• Compliance engineering• Green & Arctic technology studies• Fabrication and commissioning support
Contact person: Jan A. KorsnesTitle: Vice President Floating ProductionE-mail address: [email protected] website: mossmaritime.com
TOPSIDES ENGINEERING MARINE ENGINEERING &MOORING DESIGN
DRILLING SYSTEMS
REFERENCESA selection of our references is given below. Please contact Moss Maritime for a full list of references.
Project Client Technology
Bollsta Dolphin Fred Olsen Energy CS-60 drilling semisubmersiblePolar Star Gazflot CS-50 MkII drilling semisubmersibleCheviot Moss Octabuoy ATP Detail design Octabuoy dry-tree semi FPSO PetroJarl 1 Teekay Production FPSO FEED life extensionFPSO Gimboa Sonangol/Saipem Detail design - FPSO conversion hull & marine systemsBerge Helene BW Offshore Detail design - FPSO conversion hull & marine systemsShtokman SDAG/Saipem FEED development icebreaking FPU/FPSOLuva/Aasta Hansten Statoil Octabuoy Concept studyOffshore LNG Toscana OLT FSRU detail engineeringGolar Spirit Golar FSRU detail engineeringDeepwater FPU Tullow Oil Octabuoy Feasibility studyFPU Noble Energy Feasibility studyHilli FLNG Keppel/Golar Basic and detail engineering
55
MRC Solberg & Andersen
MRC Solberg & Andersen has been active on the offshore market since the early 80s. The company is the market leader within its field, and has suplied valves and related services to most platforms on the Norwegian continental shelf, making it a lead-ing supplier of technological-based services and solutions on our markets. We help cut costs by becoming an active link in the customer’s value chain. We possess solid specialist knowledge to undertake advanced design and engineering within our core areas. The result is reliable, effective solutions focusing on cost-effectiveness, quality and function.
PRODUCTSControl valves, safety valves, on/off valves, rupture discs, actuators, Walther couplings, valve diagnos-tic, leak detection, Valve Management.Courses for the oil industry on the subject of valves.
SERVICESEngineering services, workshop repairs, field service, machining and part production, welding services, warehouse services.
Contact person: Kaare SunnarvikTitle: Director, Market & Project DivisionE-mail address: [email protected] website: saas.no
TECHNICAL & PRODUCTIONSERVICES
ELECTRIC/AUTOMATION/TELECOM
REFERENCESSolberg & Andersen AS product range can be offered within following segments:
End user Contractor Project Start End Scope of supply Manufacturer Customer reference
Statoil Statoil All Installations 2007 2015 Control and Choke Valves Fisher Mokveld
Frame Agreement SAP4600008753
Statoil Statoil All Installations 2007 2015 Non Slam Check Valves Mokveld Frame Agreement SAP4600008754
Statoil Statoil All Installations 2013 > Spareparts for Farris and Elfab
FarrisElfab
Frame Agreement SAP4600019775
ConocoPhillips ConocoPhillips All Installations 2010 > Control Valves Fisher Frame Agreement NSBU-081494
ConocoPhillips Aker Egersund Ekofisk Zulu 2011 2012 Control valves Fisher EKOZ-AK-B-EI210-1001
Aibel Aibel Dolwin 2012 2013 Ball Valves ABV Velan 4500130078
ENI ABB / HHI Goliat 2010 2014 Control Valves Fisher 4560192976
ENI ABB / HHI Goliat 2010 2014 Safety Relief Valves Farris 4560192976
ENI ABB / HHI Goliat 2010 2014 Gate, Globe, Check and Butterfly Valves
Solent &Pratt ABV
4560192976
ATV ABB / HHI Goliat 2010 2014 Linear Actuators Emerson/Bettis 504843
Statoil Statoil All Installations 2008 2017 Valve Management and Service Agreement
All
ConocoPhillips ConocoPhillips Ekofisk Area 2008 2018 Valve Management and Service Agreement
All
BP Norge BP Norge All Installations 2008 2017 Valve Management and Service Agreement
All
BP Norge BP Norge Skarv 2011 2017 Valve Management and Service Agreement
All
GDF Suez GDF Suez Gjøa 2013 2017 Valve Management and Service Agreement
All SAP4600004088
Marathon Oil Marathon Oil Alvheim 2014 2019 Valve Management and Service Agreement
All SAP4600010742
Statoil Statoil Sture Ongoing Online Valve Monitoring and Diagnostic Agreement
All Frame agreement
Statoil Statoil Kvitebjørn Ongoing Online Valve Monitoring and Diagnostic Agreement
All 4502976487
ENI ABB / HHI Goliat 2010 ValveWatch Projects
Statoil Statoil Gudrun 2013 ValveWatch Projects
Statoil Statoil Valemon 2014 ValveWatch Projects
Statoil Statoil Gina Krog 2014 ValveWatch Projects
Statoil Statoil Mariner 2015 ValveWatch Projects
Statoil Statoil Aasta Hansteen 2015 > ValveWatch Projects
56
Multiconsult
Multiconsult has been involved in oil & gas projects in Norway and abroad for over 40 years. We have developed leading expertise in design, engineering and follow up of execution and installations for both on- and offshore projects. Our expertise covers civil, geotechnic, design of sophisticated concrete and steel structures as well as multidiscipline engineering including special services for offshore structures and floaters and onshore plants according to NORSOK requirements. Our specialized services within marine geotechnical and arctic technology comprising cold climate engineering and offshore ice simulations are recognized on a world class level. Our expertise is based on heavy involvement in R&D projects.
The harsh climate along the Norwegian coastline and offshore in the arctic areas poses challenges which have required technology development in many areas. Multiconsult has been heavily involved in challenging projects and technology development in this area.
MULTICONSULT TOPSIDE RELATED DISCIPLINES:Architectural disciplines, environmental loads, cold climate engineering, structural engineering, mechanical engineering, HVAC, piping & lay-out, EIT engineering, acoustics, noise and vibration, engineering management, project control, site supervision, HSE & technical safety, mechanical completion and commissioning.
SELECTED OBJECTS:• Selected modules and structures for fixed and
floating platforms• Living Quarters
SERVICES:• Concept development and engineering • Noise and vibration measurement according to
NORSOK • Light measurement, according to NORSOK• Specialized structural analyses including
dynamic and fatigue analyses• Lifting and transport analyses, dropped-object
analyses, boat-impact analyses. • Fire and explosion analyses• CFD analyses • Winterization design• 3rd Party verifications• NORSOK compliance and verification services
REFERENCES:Valemon, Ekofisk New Hotel, Gjøa, Troll A Extension, Valhall PH LQ, Gudrun, STENA DrillMAX 1-5, Maracc Inovator, Valemon LQ, North sea Wind Farm, EAS 200, Ula HVDC Module, Skrugard HVDC module.
Contact person: Ivar EngTitle: Vice President Market Oil & GasE-mail address: [email protected] website: multiconsult.no
TOPSIDES ENGINEERINGMARINE ENGINEERING & MOORING DESIGNTECHNICAL & PRODUCTION SERVICES
57
Nature Oil & Gas AS
Nature Oil & Gas provides products and services to treat slop water associated with offshore oil & gas exploration.
PRODUCTSDesigned for offshore treatment of sludge, the Long Beach Decanter Centrifuge (Sludge Treatment Unit) is a separator specially designed to separate solids from the liquid phase. A process linking a minor chemical footprint and centrifugal power reaches optimal separation. The unit achieves a significant reduction in the volume of dry matter (or sludge) returned to shore for final environmental treatment.
The Compact Treatment Unit (CTU) is an offshore slop-water treatment system. A chemical method aided by a mechanical process achieves a throughput of up to 20m3 per hour. The OiW con-tent is compliant with international environmental standards for water discharged to sea.
Optimized for deployment offshore, the systems are fit for all types of rigs, drill ships, FPSO and platforms.
SERVICESSite-surveys, engineering services, land based treatment plants, slop treatment units for new build projects, tank cleaning services and similar.
REFERENCESNature Oil & Gas systems are deployed onboard semi-submersibles, drill ships and at land based treatment facilities. For a full list of references, please visit www.natureog.com.
Contact person: John GiljeTitle: Director – Global Sales & MarketingE-mail address: [email protected] website: natureog.com
PROCESS EQUIPMENT
CTU
STU
58
Nexans
Nexans, the all-in-one cable provider, creates value upstream.
To meet the needs of upstream development, Nexans proposes an offer based on Four Pillars to create value for upstream oil & gas players. It provides the technology, quality and collaboration needed for future upstream growth.
Cable PerformanceTo increase operational safety on platforms, protect field assets, handle drilling muds, avoid operational downtime, allow drilling in arctic temperatures, protect against UV, and increase cable length between Variable Speed Drives and Motors, Nexans upstream cables are made to meet and exceed standards.Cable InstallationTo ensure optimized installation, Nexans offer cables featuring handling, rerouting, less weight, cable pulling and thus significantly reducing cost and manpower.Full Cable System OfferTo increase flexibility, protection, strength, safety and connectivity Nexans proposes modular systems, special packages and complete kits.ServicesTo shorten lead times, increase availability,
reduce the number of cable type references, optimize sizing and routing, provide testing, improve designs and assure certification, Nexans offers global inventory, one-stop shopping and engineering partnership.
PRODUCTS• SHIPLINK® LV/MV power control and
instrumentation IEC (NEK 606, BS6883, IEC60092-350 series)
• GEXOL® LV/MV power, control and instrumentation IEEE1580 (Type P, CIR)
• HV power cables and accessories• Data cables (LAN, fieldbus, coax and fiber)• Service loops• Bridles and assemblies• Variable Frequency Drive cables• ICEFLEX® cables
Contact person: Salvatore Di GiorgioTitle: Marketing Director Oil & Gas UpstreamE-mail address: [email protected] website: nexans.com
TECHNICAL & PRODUCTIONSERVICES
ELECTRIC/AUTOMATION/TELECOM
SELECTED REFERENCES
Goliat FPSO Year: 2015 Owner: ENI Shipyard: Hyundai Cable: RFOU, BFOU (NEK)Class: DNV
Atwood Osprey Semi-Sub 11 Year: 2011Owner: Atwood Oceanics/Chevron Australia Shipyard: Jurong ShipyardCable: RFOU, BFOU (NEK)Class: ABS
USAN (FPSO) Year: 2010Owner: TOTAL-ElfShipyard: Hyundai Cable: RFOU, TKCK, (NEK, IEC)Class: BV
59
NLI Solutions
NLI Solutions is a group of companies supplying engineering and fabrication services, technology products and process solutions to the offshore oil and gas industry.
We undertake the complete responsibility from concept development to manufactured product.Our mission is to make life easy for our custo-mers. To fulfill this goal we focus on competence development, high quality, flexibility and punctuality. NLI Solutions have more than 500 highly qualified employees in our locations in Norway.
PRODUCTSOffshore & Onshore process modules and skids
Buildings, bridges and structures
Active fire fighting and fire suppression systems:NLI Solutions is a provider of reputable products which is NORSOK classified and suitable for offshore facilities.
• Gaseous systems:· Novec 1230· Ingergen· Argonite· CO2
• Water / Foam systems:· Deluge· Foam tanks· Water mist· Sprinkler
SERVICESNLI Solutions is a highly qualified supplier of multi-discipline engineering services. Engineering services:• FEED, Area, Detail Engineering • Piping, Layout, Structural, Mechanical, HVAC, E&I • Material Handling • Fire and Safety• PDMS • Procurement • Planning• QA/QC • DCC
Fabrication and assembly services:• Construction management • Constructability analysis • Supervision • Lifting and transport analysis and reports • Structural fabrication • Piping fabrication • E&I installation • Inspection and Pressure testing • Surface protection
Mechanical completion and Commissioning Services:• Management • Inspectors / Supervisors • Offshore Surveys • Condition evaluation and reports • VMC 2.0 - Vcon Mechanical Completion system
Contact person: Jan-Erik Bjørge Title: VP Oil & GasE-mail address: [email protected] website: nli.no
TOPSIDES ENGINEERINGTECHNICAL & PRODUCTIONSERVICES
ELECTRIC/AUTOMATION/TELECOMROTATING EQUIPMENTSAFETY EQUIPMENTOTHER MECHANICAL EQUIPMENT
REFERENCESA complete reference list is available upon request.
Project Client Technology
Gina Krog Schlumberger/Statoil EPC: Produce Water Treatment PackageJohan Sverdrup Power from Shore FEED
ABB/Statoil Engineering services (HVDC):HVAC, Mech, Piping/Layout, PDMS
Martin Linge Apply Emtunga/Total EPC: Clean Agent Novec 1230 systemMartin Linge Technip/Total EPC: Fixed Foam (AFFF) PackageTroll TPC3-4 ABB/Statoil Engineering services (HVDC):
Structural, Mech, Piping/Layout, PDMSAasta Hansteen Kanfa Aragon/Statoil Engineering services (TEG Skid):
Structural, Mech, Piping/Layout, PDMS, Safety
60
Novenco
Novenco AS is a global market leader with regard to the manufacture supply and installa-tion of complete Heating, Ventilation and Air Conditioning (HVAC) systems for the offshore industry. Projects range from engineering and supply of equipment, to complete turn key packages involving installation and commissioning. Novenco have a global network of partners and a worldwide reference list.
PRODUCTS• Air handling units • Air handling containers • Axial flow and Centrifugal fans • Cooling plant, including provisional stores • Self-contained cooling Units • HVAC Control systems • Louvres, Drop separators & filters • Duct heating and cooling coils • All type of dampers • Cabin units / air devices • Sound attenuators • Bottle bank for emergency air under shut down • Air scrubber systems (Air cleaners) • Dehumidifiers
SERVICES• Design • Project Management • Equipment delivery • Commissioning • After Sales
REFERENCESMajor Offshore Projects 2012-2015:
Orders 2015
BT-4000 Light workover unitDSOC – Etesco System, Engineering and Equipment.Sevan LQ UnitCosco Nantong– Teekay Offshore, Engineering and Equipment.
Orders 2014
Norshore Pacific drillshipCIMC Raffels – Norshore Drilling, System engi-neering, equipment delivery and installation.Island Navigator drillship Kawasaki– Island Offshore, System engineering and equipment delivery.Gina Krog Apply – Statoil, HVAC equipment for living quarters.2 x New rigs JU-2000E jack-up Waigaoqiao shipyard– CSSC Lease, System engi-neering and equipment delivery.
2 x Ocean 500Cosco Nantong – Prosafe, 990 men living quarters.Ivar Aasen Top SideSMOE - Det Norske Oljeselskap, HVAC equipment.
Orders 2013
P-74, El-module M-17SeaOil Engineering / EBR – Petrobras, Equipment engineering and delivery.Gina KrogDaewoo Shipbuilding & Marine Eng. (DSME), Delivery of HVAC equipment for topside.Ivar AasenApply - Det Norske Oljeselskap, HVAC equipment and engineering support for Ivar Aasen LQ.CJ 70 Jack upDSME – Maersk Drilling, System engineering and equipment delivery of HVAC system.DANA FPSOCosco – DANA Petroleum, System engineering, equip-ment delivery and commissioning of HVAC systems.P-69 Electrical & lab moduleSeaOil/KFels – Petrobras, Equipment engineering & delivery.P-66 Electrical & lab moduleSeaOil/KFels – Petrobras, Equipment engineering & delivery.Ocean 500 IICosco/Nantong – Cotemar, AC system engineering and equipment delivery for 990 men living quarters.Two rigs JU-2000E jack-upWaigaoqiao shipyard – Prospector, AC system engineering and equipment delivery.
Orders 2012
P-74, P-75, P-76 & P-77Cosco/Dalian – Petrobras, AC system engineering and equipment for living quarters.Ocean 500Cosco/Nantong – Cotemar, AC system engineering and equipment delivery for 990 men living quarters.Mariner frame agreementDSME – Statoil, HVAC blanket order for new pro-duction platform.Edvard GriegAker – Lundin, Delivery of HVAC equipment.
Contact person: Henrik JorkjenTitle: Sales & Marketing Manager – offshoreE-mail address: [email protected] website: novenco-group.com
OTHER MECHANICAL EQUIPMENT
61
Oglaend System
Oglaend System leads the market for multi-discipline support systems and cable manage-ment systems. Serving the Marine, Oil and Gas, Petrochemical, Alternative Energy, Clean Room and Infrastructure industries, we produce a range of flexible cable tray & ladder systems and various innovative support technologies that deliver added value through reduced installation time, maximized volume utilisation, weight reductions, enhanced life time integrity and improved safety performance.
PRODUCTS• Multidiscipline support systems• Cable tray and cable ladder systems• Cable ladders & accessories for ships• Lighting support equipment• Racks, instrument stands & equipment plates• Pipe support• Trefoil & single foil cable cleats• Engineering support
SERVICESOur systems are supplied in primarily stainless steel and FRP (Fibre Reinforced Polyester)• Drilling rigs• Offshore platforms• FPSOs• Petro chemical plants• LNG terminals
REFERENCES• Shell Prelude FLNG• Inpex Ichthys CPF• Shell Pearl GTL• Ekofisk 2/4 L• Peregrino FPSO• Goliat• South Arne• Quad Turret• North Rankin• Gudrun• Johan Sverdrup Field
Contact person: Søren ArentsenTitle: Group MarCom ManagerE-mail address: [email protected] website: oglaend-system.com
ELECTRIC/AUTOMATION/TELECOM OTHER MECHANICAL EQUIPMENT
62
PALFINGER MARINE
PALFINGER MARINE is the global leading manufacturer of highly reliable, innovative and customised deck equipment and handling solutions for the maritime and oil and gas industries. Its worldwide services network, including spare parts supply, guarantees prompt and professional on-site support. PALFINGER MARINE Norway has it’s headquarter in Bergen. The internationally operating company, which has its registered office in Salzburg (Austria) is part of the publicly listed PALFINGER Group.
The PALFINGER MARINE portfolio covers a range of offshore and marine cranes for different appli-cations, winches, lifting and handling equipment, bulk and bunker handling equipment in addition to davits and boats. PALFINGER MARINE work closely with customers, authorities and classifi-cation societies in all phases of the project from design to installation to ensure the best and most cost effective solution.
PRODUCTSCranes:• Foldable knuckle boom cranes• Stiff boom cranes• Telescopic boom cranes• Knuckle boom cranes• Wire luffing lattice boom cranes• Travelling cranes• Active Heave Compensated Cranes
Functions:Gantry cranesBOP and XMAS tree cranesPipe handling cranesRiser handling cranesPersonnel basket
Winches:• CT winches• AHC winches• Guideline/pod line winches• Spooling winches• Umbilical winches• Thruster replacement winches
Lifting and handling equipment:• Skidding systems• XMAS handling systems• Module handling systems
Bulk and bunker handling equipment:• Bulk loading stations• Reels for cuttings hoses• Dry bulk handling system
SERVICES• Upgrades & modifications • Engineering and product development• Technical support and assistance• Equipment installation and training• Commissioning• Testing• Annual inspection and maintenance• General maintenance, repair and upgrading• Original spare parts• Service engineers and experts• Training services• Service management database
Contact person: Kjetil RoksvågTitle: Sales Manager NorwayE-mail address: [email protected] website: palfingermarine.com
TECHNICAL & PRODUCTIONSERVICES
CRANES, LIFTING & MOORINGSROTATING EQUIPMENTSAFETY EQUIPMENTOTHER MECHANICAL EQUIPMENT
REFERENCES
Project Client Product Year
Johan Sverdrup Statoil 7 x Fully electric lattice boom Offshore cranes OngoingSete Brazil Drillships /Petrobras
Jurong shipyard Brazil
28 x Offshore-cranes for 7 Drillships Ongoing
Mariner Statoil / Aker 3 x BOP handling cranes2 x Foldable knuckle boom service cranes
2015
Shell FLNG Shell / Samsung 1 x Offshore crane2 x 130 T Thruster room cranes
2015
Moho Nord FPU Total / HHI 2 x Stiff boom offshore cranes 2015Catcher FPSO BW Offshore 2 x Knuckle boom offshore cranes 2015Ichthys FPSO INPEX / DSME 1 x Knuckle boom offshore crane 2015Peregrino/Statoil Brazil Technip Bulk loading stations 2014Borgland Dolphin Dolphin Drilling XMT handling system 2014
63
Petrolink as
Petrolink support operations of platforms, subsea installations and floating production units’ offshore, oil and gas terminals onshore, refineries and process plants including power plants and carbon capture facilities. In addition, we provide services concerned with concept selection, preparation for operations, operations support and emergency response. Operating companies and asset owners in Norway and internationally are our main clients.
PRODUCTSPreparation for OperationsFrom strategies, technical studies and work processes to flawless start-up.
Thorough preparation for operations is essential to optimising performance, meeting production targets and complying with HSE&Q requirements. Petrolink has the experience and skills to participate from project inception and development through fabrication, installation and mechanical completion to commissioning and start-up of operations.
Production OperationsManagement, technical services and operations assurance for any facilities.
The main target for any stakeholder in exploita-tion of natural resources is that operations are efficient and safe. Petrolink provides the complete set of services required to establish and maintain operations strategies, organisation plans and work procedures. We are ready to participate in live facility operations including taking on full operational responsibility through duty holder assignments. We have participated in operations since many years by providing a variety of services to increasing values while improving performance and reducing risk. Operations SupportFrom training, personnel assistance and documentation to maximum uptime
Operating facilities need continuous attention to maintain and improve efficiency and safety for ascertaining technical integrity at any time. Petrolink has the knowledge and resources representing the competence, experience and workmanship required for any such tasks during the entire operations phase, i.e. from start-up through operations to abandonment.
SERVICESOur main business areasPetrolink supplies services for the entire lifecycle of projects, i.e. from development and construction
through start-up and operations to abandonment. Main focus is on the project phases Preparation for Operations, Production Operations and Operations Support, which are our main business lines.
REFERENCESCentrica Energi – Offshore Development Assignment: Operation Philosophy and Subsea Concept Study Location: Stavanger, Norway Man-hours: 4400Duration: 2014 – 2015Main deliverables:• Development of operations philosophies• Perform conceptual study to evaluate subsea
system for an FPSO solution • Manage and evaluate an FPSO study for quality
and possible technical improvement
Ghana Gas – Gas Treatment & Export PlantAssignment: Competence assurance and training of operation and maintenance teamLocation: Stavanger, Norway & Atuabo, GhanaMan-hours: 8400Duration: 2013 – July 2014Main deliverables:• Perform competence and gap analysis of
personnel versus job description• Develop training program and instructors manuals• Deliver instructors and perform operations
training, including safety and emergency response, on site in Ghana
• Evaluate performance of operation and maintenance team after training
Total - Martin Linge, Competence and Training ProgramAssignment: Competence assurance and training of operation and maintenance teamLocation: StavangerMan-hours: 10 000Duration: 2014 – presentMain deliverables:• Develop training program and instructors manuals• Deliver instructors and perform operations training• Process overview drawing in wall sized format• Zoom & Pan function
Contact person: Arve Sem-HenriksenTitle: VP Business DevelopmentE-mail address: [email protected] website: petrolink.no
TOPSIDES ENGINEERINGTECHNICAL & PRODUCTIONSERVICES
64
PG Flow Solutions (Ing. Per Gjerdrum AS)
PG offers innovative pump and compressor solutions for the global oil and gas, subsea and marine markets. Our product range is further enhanced to cover related products and applications to up-stream and downstream the processes, including:
• Mechanical Seal Buffer Fluid Systems• Cargo handling solutions• Control systems• HPU’s• Heaters/coolers• Drives• Agitators• Start-up• Commissioning• Spare parts of advanced systems and pump
packagesPG pumps and compressor packages and related equipment are suitable for fixed and floating production facilities such as:• FPSO• FDPSO• Semi-submersible platforms• Seawater injection• Drilling rigs,• Intervention vessels• Cargo handling for supply ships/ vessels and
refineriesFurther, PG has innovative solutions for:• Subsea boosting and processing facilities• Subsea well boosting• Subsea water injection• Subsea mud and drill cuttings boosting
PG represents high-quality pump and compressor suppliers throughout Europe.
PRODUCTSPG focus on the export of our pump packages and pump solutions, such as:
PG MACS Cargo handling• PG MACS - Multi Application Cargo Solution, for
Riggs, Supply ships and onshore plants Mud & drill cuttings included
Injection packages:• Chemicals Injection packages• MEG injection Packages• Methanol Injection Packages for Topside (and /
or subsea) production facilities• Water Injection Pump PackagesPump Packages (API610/674/675/676/ISO/EN):
· Condensate/ Crude Oil Export Pumps· Cooling Medium/SW/FW Pumps · Misc. Pump Packages· Process & Utility Pumps
· Hot Oil Pumps · Open/Closed Drain Pumps· Submerged / Top Mounted Tank Pumps · Chemical/MEG pumps
Subsea Pumps:• Subsea Multiphase pump solutions
(Bornemann)• Vertical Twin screw multiphase• Subsea pumps for subsea separation facilities,
wellhead boosting and tiebacks• PG MAPS (Multi Application Pump Solution)• Subsea and topside Liquid / abrasive Pump
solution, for liquid injection and /or boosting (HP/HT), drilling mud and cuttings boosting
SERVICESPG deliver spare parts and performs service and maintenance worldwide.
REFERENCES• Containerized Chemical Injection Modules for
Gjøa, Valemon, Aasta Hansteen and Mariner• CIP/MEG/Methanol Injection Systems for
Statfjord B/C, Siri, Heidrun, Troll A, Valhall, Gullfaks, Snorre A, Alvheim, Kvitebjørn, Åsgaard B, Gudrun, Valemon, Draugen, Johan Sverdrup
• Chemical injection Package: Gjøa chemical injection module, 150 ton module including 28 dosing pumps, 19 steel tanks, all associated equipment and project management. Client: StatoilHydro (2009)
• Chemical injection Package: Valemon chemical injection module, 62 ton module including 14 dosing pumps, 12 steel tanks, all associated equipment and project management. Client: StatoilHydro (2013)
• PG MACS: Deliveries of environmental friendly, closed loop - Cargo solutions incl. Drill Cuttings below deck - feeder and -pumping systems for 19 supply ships. Clients: Farstad Shipping, Østensjø, DOF, Deep Sea Supply, Siem Offshore, Bourbon Offshore, Edison Chouest, Wilson Sons (Saveiros/Ultratug). (2007-2013)
• Subsea Pumping Solution:• Vertical Multi-phase twin screw pump for the
test facility in Porsgrunn. Designed as a subsea solution. Client: StatoilHydro (2009)
• Single phase:, PG-MAPS: (Multi Application Pump Solution), HP/HT Feluwa Pump.
Contact person: Roy NorumTitle: CEOE-mail address: [email protected] website: pg-flowsolutions.com
PROCESS EQUIPMENT ROTATING EQUIPMENT OTHER MECHANICAL EQUIPMENT
DRILLING SYSTEMS
65
Pon Power as
Pon Power is the authorized distributor of CAT and MaK engines and generator sets in Scandinavia and the Netherlands. We offer complete systems throughout the product spectrum, ranging from 6,4 to 16.200 kW, which are mainly used as propulsion and auxiliary engines, primary power or emergency power, for firefighting pumps and cranes in offshore installations.
All engines are designed and tested to fit your needs. With our special engineered products like Genflex and ATEX solutions, you can minimize vibrations and heat to safely install CAT engines in Zone II areas.Pon Power is certified according to these standards for the O&G industry: ISO 9001, ISO14001, OHSAS18001, MSA Platinum and Achilles - illustrating our focus on quality, safety and environmental responsibility. Our goal is not just to be certified but that quality, safety and focus on environmental impact is a part of our daily operations in all aspects of the company by having a common mindset focusing on continu-ous improvement. We are your reliable partner in highquality power installations.
PRODUCTSPon Power provides high quality solutions in the offshore market following all relevant standards in
the full power range of CAT and MaK products. Our installations are engineered to match all require-ments which we visualize in our FAT testcell.
Our products have been successfully installed in all types of vessels and in various types of jack-up rigs, FPSO, FDPSO, semi-sub platforms and semi-deepwater rigs.
SERVICESWe are renowned for our efficient 24-hour service and rapid delivery of spare parts, wherever they are needed. Our Caterpillar certified Service Technicians and original CAT spare parts will keep your business running. Anytime. With our specialized program for planned maintenance we offer you flexible service solutions with remote monitoring to plan and budget your service jobs years in advance.
Contact person: Vidar RasmussenTitle: Sales Manager, Oil&GasE-mail address: [email protected] website: pon-cat.com
PROCESS EQUIPMENT
REFERENCESWe are upgrading and servicing CAT engines in offshore installations for the world’s largest O&G com-panies and our Pon-developed Genflex solution is highly popular to minimize vibrations. See references below. This is a selection only, please contact Pon Power for a full list of references.
Project Client Technology
Greater Ekofisk ConocoPhillips Pon GenflexBP Ula BP Pon GenflexPT 63 BW Offshore Pon GenflexOSX Siemens Pon GenflexENI Ghana OCTP Yinsin Holdings C280 2500 ekW
66
PREZIOSO Linjebygg AS
PREZIOSO Linjebygg assists our customers in extending the life and optimizing the cost of their most critical assets. The PzL Group is counting more than 5000 employees working across 17 countries. Regional coverage: Northern Europe, Continental Europe, Sub-Saharan Africa, Middle East & North Africa and South America. Norway head office is located in Molde.
BUSINESS LINES• Insulation, Scaffolding & Surface Treatment• Inspection, Modification & Decommissioning• Asset Integrity Management
SERVICESWe plan, design, engineer and execute a range of technically safe and cost effective solutions to challenging projects both high and low on oil and gas installations. In addition, we provide traditional services such as scaffolding, rigging operations, insulation, surface treatment and maintenance. To maintain a highly skilled and professional work force, we operate our own training center covering most of the work disciplines. We also have developed our own innovation process - the Tempo Process - for developing new ideas and solutions according to our customers needs for efficiency and safety.Through our subsidiary MainTech AS, we also assist our customers in designing, engineering and deploying asset integrity solutions for the oil & gas industry.
SPECIAL PRODUCTS• Remote operations in the splash zone/subsea
without need of traditional ROV’s or divers• FPSO swivel exchange and modifications while
vessel is on it’s offshore location• Lifting and rigging operations in areas with
limited or no crane coverage• Topside diamond wire cutting in ATEX zone 1• Cleaning & inspection inside process vessels
without entering of personnel• Piping integrity services (repair of corroded pipe
systems while under operational conditions) • Hook-up assistance• Rope Access Services
REFERENCESOur track record in Northern Europe goes back to the early 90’s. Our clients are oil companies and contractors within the oil & gas industry in defined geographical markets. For detailed information in your particular field of interest, please contact us!
Contact person: Bernt Schjetne Title: International Sales ManagerE-mail address: [email protected] website: prezioso-linjebygg.no
TECHNICAL & PRODUCTIONSERVICES
CRANES, LIFTING & MOORINGS
New and unique topside ATEX certified cutting tool. Special rigging solutions for areas outside crane coverage.
67
Rapp Bomek
Rapp Bomek AS is a leading global supplier of fire-rated heavy, medium and light duty doors for off- and onshore applications. With origins dated back to 1864, Rapp Bomek is one of Norway’s oldest companies within marine mechanical engineering. Our doors safeguards both material, human and environmental values. Rapp Bomek designs doors for long lasting, high quality and cost effective safety measures.
PRODUCTSRapp Bomek utilizes a comprehensive quality man-agement system which covers all business areas. We are certified with the following standards:• Quality Management System NS-EN ISO 9001:2008• Environment Management System NS-EN ISO
14001:2004
Specific requirements for installations are shown in certificates. Rapp Bomek have certificates with all major classification societies such as:• DNV-GL• Bureau Veritas• US Coast Guard• ABS• Russian Maritime Register of Shipping• RINA
Rapp Bomek doors cover all fire ratings and types:• Hinged and sliding• Single and double• Light-duty A0/A60 rated
• Super light-duty A0/A60 rated• Medium-duty A0/A60 rated• Heavy-duty A0/A60/H60/H120/J30 rated• Combination doors, fire rated and weather/
watertight• Non-rated• Louvered• Pneumatically operated• Hydraulically operated• Electrically operated
SERVICESRapp Bomek has a professional service team of more than 20 highly trained service engineers who can provide installation and maintenance on all types of fire doors and systems/equipment. The service team has extensive experience, and the necessary certificates and safety courses required for offshore work. We have established a considerable stock of spare parts required during normal operation.We have established a considerable stock of spare parts required during normal operation.
Contact person: Per Arne HaugTitle: Sales, Marketing and Service DirectorE-mail address: [email protected] website: rappbomek.com
MARINE ENGINEERING & MOORING DESIGN
SAFETY EQUIPMENTOTHER MECHANICAL EQUIPMENT
REFERENCESSince 1975, Rapp Bomek has delivered more than 35,000 doors to oil and gas installations, ships and other projects, including the following:
Name Company Location
Johan Sverdrup Statoil NorwayMariner Statoil UKGoliat FPSO ENI NorwayBP Quad 204 HHI UKBig Foot General Marine USAAasta Hansteen Statoil NorwayAgbami DSME/Chevron NigeriaNorthern Endavour FPSO Woodside TimorValhall BP NorwayEdvard Grieg Kværner Stord/Lundin NorwayIchthys FPSO LNG DSME/Inpex AustraliaValemon Statoil NorwayStatfjord B Statoil NorwayEldfisk 2/7 E Phillips/Aker Maritime NorwayKårstø AF Gruppen Norway
68
REINERTSEN AS
REINERTSEN has been a supplier of services and products to the oil & gas industry since 1980, and is one of the largest engineering offices in Norway. The organization is recognized by a high educational level, and extensive experience.
REINERTSEN has many large and demanding clients requiring streamlined execution of large projects. This has driven a fast development of systems within IT, HES&QA, engineering, procure-ment and material management.
REINERTSEN cover all phases of a project, providing the staff with the opportutity to work within all parts of the value chain from early conceptual studies through detail engineer-ing, procurement, fabrication, installation and operation/maintenance.
PRODUCTSREINERTSEN have supplied the following types of process systems to offshore oil & gas platforms:• Gas dehydration systems• Compressor modules• Power generation modules
• Manifold modules• Tie-in systems• Chemical injection skids
SERVICESREINERTSEN AS has been involved in the Oil & Gas industry since 1980, and has in this period executed conceptual- and FEED-studies, detail engineering projects, and during almost 20 years also EPCI Modification Contracts.
Offshore process facilities supplied on an EPCI basis is REINERTSEN’s core business, and our references include the following projects; Oseberg Delta 2, Heidrun LPP, Svalin (Grane), Heidrun LPP, Njord LPP & Hyme, Troll B gas injection, Morvin and Tyrihans, Heimdal NPG, Oseberg Delta and Skirne Byggve (Heimdal).
Contact person: Geir SuulTitle: Director Business DevelopmentE-mail address: [email protected] Company website: reinertsen.com
TOPSIDES ENGINEERINGMARINE ENGINEERING & MOORING DESIGN
PROCESS EQUIPMENT
69
Rolls Royce Marine
Rolls-Royce is a world leader in marine solutions, providing products, services and expertise to more than 30.000 commercial and naval vessels through their extensive global network.
Main products for the E&P segment are Azimuthing Propulsion systems with a market share of 70%, Power systems, Electric and Control systems and Mooring systems. In 2015 we celebrated 50 years anniversary since we delivered the first Azimuth thruster, as of today we have delivered more than 1.000 azimuth units to the industry.
PRODUCTSRolls-Royce products include a wide range of:• Ship Design• Thrusters• Diesel and Gas engines, Medium speed• Diesel and Gas engines, MTU High Speed• Gas Turbines• Deck Machinery• Winches• Mooring Systems• Waterjets• Marine control Systems• DP systems• Health Monitoring Systems
PRODUCT EXAMPLES FROM THE UT RANGE:• Offshore Supply Vessels• Well Stimulation Vessels• Top Hole Drilling Vessels
• IMR Vessels• Standby and Rescue Vessels• Offshore Ice breaking AHTS and PSV• Anchor Handling Supply Vessels
SERVICESBased on decades of experience in the Marine Industry and a close collaboration with the service networks globally including the Rolls-Royce Aviation Service Network, Rolls-Royce has capability to offer support to our customers globally.Equipment Health Monitoring via our 24/7 Helpdesk with remote access to critical parts and an extensive network of more than 1.500 service engineers.
REFERENCESOur reference list consists of more than 30.000 vessels and includes:• More than 120 Drillships• 100 + Semi Subs• 50 + Accomodation-, Pipelay and Construction
Barges• 1.200 + Offshore Support Vessels
Please contact us for complete reference lists
Contact person: Yrjar GarsolTitle: Vice President Commercial MarineE-mail address: [email protected] website: rolls-royce.com
MARINE ENGINEERING & MOORING DESIGNTECHNICAL & PRODUCTIONSERVICES
ELECTRIC/AUTOMATION/TELECOM CRANES, LIFTING & MOORINGSROTATING EQUIPMENT SAFETY EQUIPMENTOTHER MECHANICAL EQUIPMENT
DRILLING SYSTEMS
70
Scana Industrier
SCANA INDUSTRIER ASA
Scana Industrier ASA (Scana) is a Nordic industrial group with main business areas to deliver products and systems to energy related customers. This includes oil and gas, other energy and maritime acitivities within the offshore area. In addition Scana deliver service and perform repairs and maintenance for clients within the same markets.
Scana’s technology, unique materials knowledge and extensive production experience form the basis of our competitiveness. Our aim is to be the preferred supplier to leading companies within our market segments. The majority of our customers are located in Europe, the Americas and Southeast Asia.The group has as at 31.12.2014 814 employees. The head office is located in Stavanger. The group has operative companies in Norway, Sweden, USA, South-Korea, Brazil Poland and Singapore, and representatives in a series of countries, worldwide.
PRODUCTSEngineeering design and production of• Mooring systems• Offloading systems• Swivel and turret solutions• Valve control systems• Hydraulic and pneumatic valve actuators• Forged special components, high alloy castings,
machined components (shafts, axels, connectors and risers)
SERVICES• World-wide service and maintenance on all
delivered products and systems• Material technology consultancy• Engineering and design• Machining
REFERENCES• Sevan Marine (Several)– Offloading and
mooring systems• Dana Petroleum (Western Isles)– Mooring system• Ecovix (Petrobras) – Offloading systems (16 units)• APL (several) – Turret, swivel and bow
loading systems• FMC/Aker/Other – riser & connector
components• Huyndai/Samsung/Other – Gas and ballast
actuators and controls• Misc – Special casting and machined products
and components• Teekay (Gina Krog)– Offloading system• Knutsen (Martin Linge) – Mooring system• Yinson (OCTP, Ghana) – Mooring system• Jurong (Petrobras/Libra) – Offloading system
Contact person: Jan Henry MelhusTitle: Group Director Oil & GasE-mail address: [email protected] website: scana.no
MARINE ENGINEERING &MOORING DESIGN TECHNICAL & PRODUCTION SERVICES
ELECTRIC/AUTOMATION/TELECOMCRANES, LIFTING & MOORINGSOTHER MECHANICAL EQUIPMENT
71
Semco Maritime
Contact person: Jeff PetersenTitle: Snr Sales ManagerE-mail address: [email protected] Company website: semcomaritime.com
TOPSIDES ENGINEERING
ELECTRIC/AUTOMATION/TELECOMROTATING EQUIPMENTSAFETY EQUIPMENTOTHER MECHANICAL EQUIPMENT
Semco Maritime is a Global Company and Market leader in the Design, Manufacture & installation of Topside systems for the Offshore Market specializing in Firefighting, Telecommunications & Nitrogen Generation. With Engineering & Fabrication sites around the world we are strategically placed to provide our clients with local and international sup-port to all codes & standards.
PRODUCTS Nitrogen Generation Systems (incl Boosters com-pressors & Receivers)Fire Fighting Systems (Deluge & Foam systems)Semsafe Watermist systems (Total & Local Flooding)Gaseous Systems (FM200, Novec, Co2, Argonite, etc)Telecommunications systems (full integrated system)
SERVICESDesign & CalculationsProject ManagementProcurementCommissioning, Testing & ServiceManufacture & SupplyFeed StudiesComponents & Aftersales Service & support 24/7
REFERENCES
Project Client Technology
KNARR Jordbaer FPSO Teekay / Samsung SHI Fire Fighting systems Deluge & Foam & Misc FFEOCTP Ghana FPSO Yinson Nitrogen Generation SystemCidade De Paraty FPSO SBM Nitrogen Generation & Booster SystemPeregrino FPSO Statoil Supply Telecommunications PAGA, PABX,
WAN/LANPeregrino FPSO Statoil Design, Supply & Commission of Deluge & FFE
equipmentCIDADE DE ITAJAI “ARC II“ Jurong Coms package, GMDSS, VHF/UHF, V-Sat, PAGAEZRA FPSO Premier Oil Eng, Fabrication Deluge EnclosuresTiro & Sidon FPSO ARC II Jurong Design Supply Instal VHF/UHF Repeater
Network etcCatcher FPSO Kongsberg SG Design, build & supply of communications, IPTV,
LAN, PABX systemWLAN-FSO Maersk oil Qatar WiFi Solution for communication between field
Platform and FPSOValemon Platform / FSO Statoil Design, Fab, Comm of Watermist Systems & N2
Generation
72
Sevan Marine ASA
Sevan Marine ASA is listed on Oslo Børs (ticker SEVAN) and has developed a cylinder shaped floater, suitable for all offshore environments. The Company’s primary focus is to create value for its shareholders by delivering products and solutions to the offshore industry, utilizing its core competencies within the areas of design, engineering and project execution. The basis for the products and solutions is the Sevan technology.
So far, the Company has concentrated its efforts in utilizing the Sevan technology for floating storage, production, drilling and accommodation. Other appli-cations, including Gas to Wire (GTW), FDPSO (Floating Drilling & Production) and floating LNG (FLNG) are also developed and presented to the market. Sevan Marine was founded in 2001 based on a build-own-operate scheme, where the Company assumed responsibility for the construction, ownership and operation of the Sevan units. After a restructuring process in 2011, main focus is on
licensing the technology and providing engineer-ing and project management support for the construction projects.
PRODUCTSFPSO, FSO, FLNG, GTW, MODU, FDPSO
SERVICESFor projects based on the Sevan proprietary tech-nology: Specialist and general engineering services, project management support and site supervision.
Contact person: Fredrik MajorTitle: VP Business DevelopmentE-mail address: [email protected] website: sevanmarine.com
TOPSIDES ENGINEERINGMARINE ENGINEERING & MOORING DESIGNTECHNICAL & PRODUCTION SERVICESADMINISTRATION & IT SERVICES
ELECTRIC/ AUTOMATION/ TELECOM CRANES, LIFTING & MOORINGS PROCESS EQUIPMENTROTATING EQUIPMENTSAFETY EQUIPMENTOTHER MECHANICAL EQUIPMENT
DRILLING SYSTEMS
REFERENCESPlease refer to www.sevanmarine.com for details.
Project Client Technology
Piranema Petrobras FPSO “Piranema Spirit” (ex “Sevan Piranema”) 1)Chestnut Centrica Energy FPSO “Hummingbird Spirit” (ex “Sevan
Hummingbird”) 1)Shelley Premier Oil FPSO “Sevan Voyageur”Huntington EON Ruhrgas FPSO “Voyageur Spirit” (ex “Sevan Voyageur”) 1)Goliat ENI FPSO TBN 2)Western Isles Dana Petroleum FPSO TBN 2)Ultra Deepwater Drilling Petrobras Sevan Driller 3)Ultra Deepwater Drilling Petrobras Sevan Brasil 3)Ultra Deepwater Drilling LLOG Sevan Louisiana 3)Ultra Deepwater Drilling TBC Sevan Devaloper 3)FAU Petrobras Arendal Spirit 4)FAU TBC Stavanger Spirit 4)
1) Owned and operated by TK Petrojarl2) Client owned units3) Owned and operated by Sevan Drilling4) Owned and operated by Logitel Offshore
73
Siemens Oil & Gas and Marine
Siemens’ comprehensive solutions portfolio extends across the entire oil and gas value chain and is built upon leading Siemens technology and competence. Siemens provides reliable, innovative, efficient and environmentally friendly products, systems and solutions for your production infrastructure, both onshore and offshore with global support. Siemens innovative solutions are continually being optimised and developed through our extensive, market oriented development and research programs, with a view to develop the key enabling technologies for today’s and tomorrow’s emerging processes and applications and at the same time providing our customers with the safest, most reliable solutions, life cycle services in a cost effective and attractive offering.
Expert solutions tailored to your needs and specifications: For over three decades, Siemens has been specializing in automation, electrical, compression and power generation systems for offshore structures. From tension-leg platforms through semi-submersibles and floating produc-tion systems, Siemens can guide you through the early stages of your projects with concept and front-end engineering and design support, to the equipment supply and commissioning operations and life cycle maintenance services. All of our technology is API and NACE compliant can be skid-mounted or delivered as turn key modules, providing you with peace of mind, risk reduction and confidence of your schedule. Siemens has a track record of many years in the Subsea business and are developing new innovative solutions for subsea electrical distribution to enable large-scale subsea processing. Our key business areas are Offshore Drilling, Marine vessels, Production, Drives, Pipelines, Gas Storage, E-houses and Modules and Water Solutions.
PRODUCTS & SOLUTIONS• Power generation modules and systems• Compression modules and systems • Electrical transmission and distribution solutions• Integrated electrical, automation, instrumentation
and telecom systems• Fault tolerant power supply systems• Marine power management• Variable Speed Drive systems for both marine &
offshore applications and onshore duties• Uninterruptable Power supply systems (UPS)• Subsea power supply, distribution, drives, com-
pression and control
• Water solutions for sea water treatment and injection
• Water solutions for produced water• Drilling power systems incorporating diesel
power generation• Process Equipment • Enhanced Oil Recovery• Automation and control systems• Telecommunication solutions• Navigation solutions• Safety and security solutions• Remote access solutions• Condition based monitoring
SERVICESSiemens offers customized service plans for ensuring production uptime is maintained at the highest levels and issues are dealt with quickly. Troubleshooting with 24/7 hotline support or with integrated operations capabitlies,, spare parts delivery, repairs, system upgrades and main-tenance operations form a very important part of our offering. Siemens’ global presence often guar-antees a local presence for quicker response times and in support of local content requirements.
REFERENCESWater Solutions• Golden Eagle • BG Knarr• Edvard GriegTopside/FPSO• Sevan Hummingbird & Piranema• BP Skarv• Petrobras P50 P52 P55
Contact person: Simonetta Brossa HoelTitle: Head of Oil & Gas and Marine, NorwayE-mail address: [email protected] website: siemens.com/oilgas
ELECTRIC/AUTOMATION/TELECOMROTATING EQUIPMENTSAFETY EQUIPMENTOTHER MECHANICAL EQUIPMENT
DRILLING SYSTEMS
74
Tamrotor Marine Compressors AS
Tamrotor Marine Compressors (TMC) is the world’s leading supplier of compressed air systems for marine and offshore use. The product range includes screw compressors, dryers and filters for any compressed air requirement, including tailor-made systems and custom engineered compressors for offshore and topside installations. TMC has a world-wide service, spare part and sales network.
All our compressors are approved by the major classification societies, and our quality documentation meets the specific requirements of the industry.
STANDARD RANGE OF COMPRESSORSTMC’s standard range of marine screw compressors covers capacities from 30 to 4000m3. TMC is the only screw compressor manufacturer making equip-ment strictly for the marine and offshore markets. • Made for marine and offshore use - designed for
55°C ambient temperature• Testing includes simulation of extreme
conditions• High quality parts - our air ends are famous for
their long lifetime• Delivery of original TMC parts anywhere in the
world within 48 hours
CUSTOM ENGINEERED COMPRESSORS FOR OFFSHORE AND TOPSIDE USETMC’s Custom Engineered Compressors are compliant with all requirements for offshore and topside use.• Water or air cooled systems• Capacity range 10– 55 m³/min• Non-hazardous zone installations• EX Zone 1 & 2 installations
• Compact with low noise level• Electrical, diesel or hydraulic drive• ATEX certified• Meets NORSOK requirements• Can be installed in DNV-approved offshore
container
TMC SMART AIR® COMPRESSORSTMC Smart Air® energy-saving marine screw compressors utilize the latest technology to offer precise control of compressor speed to match actual system demand. The result is up to 50% reduction in energy consumption, which means lower energy costs and reduced life cycle costs, as well as a significant reduction in harmful emissions.
AIR DRYERS AND FILTERSTMC offers complete compressed air systems including dryers and filters to achieve the highest air quality. Proper filtration is the only way to obtain oil-free air.
REFERENCESTMC compressors have been chosen by the market leaders for a large number of drillships, drilling rigs, FPSOs and OSVs worldwide. A detailed reference list is available on request.
Contact person: Hans Petter TanumTitle: Sales Director OffshoreE-mail address: [email protected] website: tmc.no
PROCESS EQUIPMENTROTATING EQUIPMENTOTHER MECHANICAL EQUIPMENT
Custom Engineered Compressors installed in DNV-approved container
75
Technip Norge
If energy were easy, there would be no need for a company like Technip. We work with our clients, today and tomorrow, wherever they are, to bring energy to the World. We will continue to contribute to their success through our constant customer focus and our integrated and sustainable project approach.
Technip’s mission is to deliver safe and successful energy projects across the World for the benefit of all our stakeholders. ‘Take it further’ is our approach to business, partnerships and aspirations. It conveys the unique message that Technip intends to excel in what we do, succeeding together, exceeding expectations and innovating continuously.
Technip’s main focus area in Norway is within the domain of subsea hydrocarbon field development, covering design, manufacture and installation of rigid and flexible subsea pipelines and umbilicals. Technip is a key integrated player in this market thanks to our portfolio of state-of-the-art subsea pipe technologies and our industrial and operational assets. Technip’s workforce in Norway comprises ~700 employees out of ~40,000 worldwide, is split between the main office in near Oslo and offices in Stavanger and Haugesund. Since the mid 1990s Technip in Norway has been playing a leading role in the development of subsea fields.
Technip Norge has recently acquired ownerships in both KANFA and Inocean enabling engineering capabilities within topsides/process and floating units. Including KANFA, Inocean and Genesis, a leading worldwide front-end engineering
consultancy belonging to Technip, the group totals some 150 Norway based employees. Their main area of expertise is as follows:
KANFA Topside / Process• Concept and FEED • Topside process modules/packages, typically
less than 5,000 t based on EPC contracts• Process trouble shooting & training
InoceanMarine hull & mooring • Design, concept and FEED• Engineering and yard supervision• FPSO Conversion specialist• Life extension studies• FPS, MODU’s (Drilling Rigs), Special
Vessels & SURF
Their capabilities have been a good fit for some of Technip’s ongoing projects and thus have already contributing to increased activities. Similarly, through KANFA and Inocean’s track record in servicing the Lease FPSO owners, has opened up a new area for Technip.
Contact person: Christian NygaardTitle: Offshore Facility DirectorE-mail address: [email protected] website: technip.com
TOPSIDES ENGINEERINGMARINE ENGINEERING & MOORING DESIGN
REFERENCESSome North Sea Technip references in addition to some FPSO lease projects by KANFA and Inocean.
Project Client Technology
Martin Linge Total Topside EPCAasta Hansteen Statoil Spar hull EPCValemon Statoil Topside E + PPiranema Spirit Sevan Marine Topside/Process EPC (KANFA)Hummingbird Spirit Sevan Marine Topside/Process EPC (KANFA)Voyageur Spirit Sevan Marine Topside/Process EPC (KANFA)Yuum K’ak’naab BWO Topside/Process EPC (KANFA) + Hull Conversion (Inocean)OCTP Ghana Yinson Topside/Process EPC (KANFA) + Hull Conversion (Inocean)Cascade Chinook BWO Hull Conversion (Inocean)Papa Terre BWO Hull Conversion (Inocean)
76
TESS as
PSF UPTIME solutions and Hose Management. TESS is a Global Company and Europe’s leading supplier of engineered system and services for hoses and hydraulics for the energy and maritime industry. TESS operates more than 110 service centers in Norway and is globally present in Brazil, Denmark, UK, US and Asia. TESS has for over 40 years been acknowledged as a reliable supplier of certified quality solutions.
ENGINEERING AND SYSTEMSTESS capabilities are complete engineering, procurement, construction and installation. Together with Partners, TESS undertakes the full responsibility of:• Customized hose solutions• Hydraulic Flying Leads (HFL) and bundles• Subsea Umbilicals• Hose handling systems/offshore loading
HOSE MANAGEMENT AND SERVICESTESS has extensive field experience and product knowledge.TESS service personnel are continuously updated and certified by training courses. We offer Service Agreements, Customer Support and Life Cycle Care Systems – in order to help Customers to improve HSE/QA and increase uptime.
• Uptime Solutions with THM, TESS Hose Management 24/7
• Manufacturing and Project Management• Pressure Testing, Flushing and Certifying of
Hoses and Systems• Piping/Welding• Vendors management Inventory/Partnershop
PRODUCTS (MRO)Our experts and engineering staff are continuously improving our product range enabling TESS to meet the present and future demands. TESS is innovative, and cooperates directly with some of
the world’s leading manufacturers. TESS offers:• Hoses and couplings• Industrial, hydraulic and ultra high pressure hoses• Bunkering and drilling hoses• Fire resistant – Warmguard hoses• Fittings and valves• Pipe fittings and quick coupling• Steel hoses, compensators and pipes
MROP• Welding equipment and materials• Personal protection and work wear equipment
(PPE)• Tools & material handling• Transmission products• Chemicals and lubricants• Other MRO products
QUALITY ASSURANCETESS has a quality assurance system in accor-dance with the requirements in ISO 9001:2008 and NS-EN ISO 3834-2:2006.
REFERENCES• Statoil• FMC Technologies• Aker Solutions• Shell• Exxon Mobil• Schlumberger• Maersk... and other world class customers!
Contact person: Stefan JohnsenTitle: Sales Manager SubseaE-mail address: [email protected] website: tess.no
OTHER MECHANICAL EQUIPMENT
WWW.GNIZTREKLAME.NO
77
Thermtech
Direct Thermal Desorption units - TMD® and TCC®
Thermtech is the technology owner of the patented TMD® and TCC® processes used to treat the contaminated solids, like the oily waste produced during drilling, production and refinery activities. The TMD® and the TCC® convert kinetic energy to thermal energy by creating friction in the waste.
Across the world numerous oil companies require the use of the Direct Thermal Desorption Units for the treatment of their waste. Thermtech supply this technology to its customers, who in turn provide services to the Exploration and Production companies. The most important property of the TMD® and TCC® is their ability to recover every component of the waste, with the same qualities of the original components. At the end of the treatment, the oil can be re-used and the clean solids (down to 0,01% TOC) can be used in different applications, land filled or discharged to sea. The design of a compact, mobile TCC® unit is among Thermtech recent developments. With this solution, instead of transporting the waste to the
location of the treatment unit, the mobile unit is transported to the waste. Aside from the obvious logistical savings that such a mobile unit can bring, its use can also make the whole process much safer by reducing the waste movements, which in itself are dangerous, unhealthy and environmentally negative. This very compact unit can be transported on trailers, supply boats and cranes, and still offers the same technological advantages, capacities and parameters that have made the TCC® process so successful.As of December 2014, more than 55 TCC® based units, designed and build by Thermtech and by its license holders, can be found in operation across the globe, located on land, platforms and rigs both onshore and offshore.
Contact person: Rocco V. ValentinettiTitle: Sales & marketing DirectorE-mail address: [email protected] website: thermtech.no
PROCESS EQUIPMENT
78
Torgy Mek Industri AS
Keeping it all together
Torgy Group is a leading supplier of all types of Pipe Supports, including Thermal Insulating (PUF) & Thermal Isolating (ASEplas), to the Worlds Oil & Gas projects.
We specialise in the design, manufacture & supply of Thermal Insulation Cryogenic and High Temperature Pipe Supports and Thermal Isolation Breaks for Hot & Cold process Pipelines & Vessels. Marketed under the globally recognised Atplas & ASEplas brands.Based on our newly developed and patented IMO A LNG containment system for fuel and cargo, we specialise in LNG Fuel and cargo units for the small scale LNG market.
PRODUCTSPipe supports, thermal insulation, Cryogenic sup-ports, high temperature supports, vessel supports.Pressure Vessels Approval Certificate, DNV, GL, ABS, LRS, BV. Hydrophore Units. LNG fuel and Cargo tank systems
LNG cargo handling systemsLNG Re-gasifications systems
SERVICESFinite element Thermal & Stress analysis
REFERENCESShortlist of major projects:
Ivar Aasen SMOEGina Krogh DSMEMartin Linge TechnipJamnagar 3 RelianceNyhamna KværnerEdvard Grieg KværnerEldfisk KværnerGorgon ChevronKarachaganak Petrofac
Contact person: Sven HalvorsenTitle: CEOE-mail address: [email protected] website: torgy.no
TECHNICAL & PRODUCTIONSERVICES
PROCESS EQUIPMENTOTHER MECHANICAL EQUIPMENT
79
Trelleborg Offshore Norway AS
Trelleborg is a world leader in engineered polymer solutions that seal, damp and protect critical applications in demanding environments.
Using advanced polymer material technology, Trelleborg Offshore provides high integrity solutions to the offshore market, and specializes in the devel-opment and production of polymers and syntactic foam, for all levels of the Offshore industry. We have a global presence with class leading manufacturing facilities in Norway, UK, US and Brazil.
Trelleborg Offshore Norway was established in 1896 and became a part of Trelleborg in 1987, and is today is the largest producer of rubber products and solutions in Norway.Our core solutions are passive and active fire-protection, Elastopipe™, corrosion protection, subsea thermal insulation, as well as custom-made engineered solutions.
PRODUCTSCorrosion protectionOur rubber is chemically resistant to most corro-sive liquids, gases, salt water, ozone and UV-light; all corrosive agents commonly encountered in the offshore sector. Anywhere steel is exposed to corrosion it can be protected with our rubber lining. Offshore installations producing oil and gas have a great need for protective coatings and linings so that they can operate safely and continuously for the life of the fields, up to 50 years.
Passive fire protectionOur passive fire protection contains our unique Firestop Technology and withstands all types of fire, including jet fire as well as being blast and impact resistant. We offer a wide range of passive fire protection systems for for rigid risers and flexible risers, bolt and flage protection (FireNut), escape tunnel and door seals, drain gully, surface protection (Vikodeck), pipe penetration seal (HPT), cable protection, hose protection and flexible seals.
Flexible piping system - Elastopipe™Elastopipe™ is our patented rubber based, flexible piping system providing increased safety at lower cost. The piping system is 100% corrosion free in addition to the explosion, impact and jet fire resistant. This makes it ideal for use on offshore and onshore oil and gas installations in the most harsh and hazardous environments. Elastopipe™ is easy to install (no “hot work”) and has a lifetime of more than 40 years.
Engineered solutionsWe custom make engineered solutions for a great variety of products for sealing, damping and pro-tection. Bearings, expansion bellows and inflatable barriers and hatch seals are some of the products we can supply.
Read more about our Elastopipe™, PFP and other top-side protection products here: http://trelleborg.com/en/offshore/Markets--and--Applications/Topside
Contact person: Camilla Østnæs OlsenTitle: Marketing Communication ManagerE-mail address: [email protected] Company website: trelleborg.com
TOPSIDES ENGINEERINGMARINE ENGINEERING & MOORING DESIGN
PROCESS EQUIPMENTSAFETY EQUIPMENTOTHER MECHANICAL EQUIPMENT
DRILLING SYSTEMS
80
Wood Group Mustang Norway AS
Wood Group Mustang Norway (WGMN) is a complete and independent supplier of engineer-ing, procurement, construction, installation and completion (EPCI(C)) solutions focused on the oil and gas industry.
Our expert teams deliver innovative and suc-cessful projects ranging from early phase concepts, complete EPCIC deliverables to main-tenance and modification of assets for vessel owners and field operators.
FRONTIERFrontier focuses on feasibility studies, concepts, early-phase design, FEED studies and engineering services within greenfield and brownfield projects for the Norwegian offshore market.
FLOATERS Floaters carry out upgrades and conversions on FPSOs, FSOs and semi-submersibles, as well as executing projects within the design and engineer-ing of new drillships and semi-submersibles. Our Shanghai office ensures a close relationship with Asian yards. We also deliver EPCI services for drill-ing / intervention vessels, and is a leading supplier of burner booms with our Petroflame ® design.
GREENFIELDGreenfield is active within major field develop-ment projects on the NCS. The Company’s work spans from complete topside modules, where WGMN takes full responsibility for the project, to integrated projects where we works together with clients and partners.
MAINTENANCE AND MODIFICATIONSM&M activity focus on modification projects on offshore installations, primarily on the Norwegian Continental Shelf (NCS). Our experience includes areas such as subsea tiebacks, topside process modification, pre-compression and electrical, instruments, control systems and telecom.
ABOUT USWood Group Mustang Norway is backed by the global resources and financial strength of our parent company Wood Group. In Norway the company employs approximately 650 people in five locations with the majority of the engineering resources in the Sandefjord office.
Contact person: Odd MohusTitle: Executive Vice President Floaters E-mail address: [email protected] Company website: woodgroup.no
TOPSIDES ENGINEERINGMARINE ENGINEERING & MOORING DESIGN
ELECTRIC/AUTOMATION/TELECOM PROCESS EQUIPMENT
DRILLING SYSTEMS
REFERENCES
Project Client Technology
Gullfaks Suncor Beta Field Class B Study
Statoil Subsea tie-in to existing platform
Gina Krog FSO Teekay FSO ConversionSafe Scandinavia TSV Westcon Tenders Support Vessel ConversionBlackford Dolphin MODU
Dolphin Drilling
Drilling Semi Upgrade
Teekay Petrojarl FPSOs
Teekay Petrojarl
Continues upgrading and modifications
KMZ FPSO topside BW Offshore Process Topside EPCCOSL Prospector COSL/ CIMC Basic and Extended Basic DesignHYSY 982 MODU topside
COSL/ DSIC Basic Design and Drilling Topside Detail engineering
HiLoad Remora Basic and Detail DesignDrillship Topsides SHI/ HHI/ STX Basic and Detail Design of Drilling Topside engineering on
several drillshipValemon topside SHI / Statoil Topside DesignIvar Aasen topside Det norske
oljeselskapTopside Design
Snorre TCC Statoil Turbine and compressor Safety Automation System Integration
81
Wärtsilä Oil & Gas Systems AS
Wärtsilä is a global leader in complete lifecycle power solutions for the marine and energy markets. By emphasising technological innovation and total efficiency, Wärtsilä maximizes the environmental and economic performance of the vessels and power plants of its customers. In 2014, Wärtsilä’s net sales totalled EUR 4.8 billion with approximately 17,700 employees. The company has operations in more than 200 locations in nearly 70 countries around the world. Wärtsilä is listed on Nasdaq Helsinki, Finland.
Wärtsilä is a leading designer, developer and manufacturer of advanced power and control solutions and fluid handling systems for ships as well as for onshore and offshore oil & gas facilities. This includes technologies for multi-fuel power generation and integrated control systems on drilling and FPSO units, cargo handling on LPG/LEG carriers and LPG FSO/FPSOs, VOC recovery for crude oil tankers and terminals, onshore LNG production, shipboard LNG re-gasification and fuel systems, LNG boiloff gas reliquefaction, and lique-faction and processing of associated and stranded gas (FLNG), environmental solutions etc.
PRODUCTSWärtsilä provides integrated solutions, based on an unmatched product portfolio, to a variety of projects including FPSOs, FSRUs and FLNGs, seis-mic vessels, drill ships, semi-submersibles and jack-up rigs, production test ships, LPG FPSOs, shuttle tankers, intervention vessels, pipe layers and crane vessels.Wärtsilä products and systems for the oil & gas industry include:• Ballast Water Management• Deep well pumps• Aux. Engines• Direct Electric Heating• Engine room pumps• Electrical and Automation systems• Exhaust gas cleaning• Fire water pumps• Flare gas recovery• Floating LNG liquefaction• Fresh water generators• Hydrocarbon blanketing• Hydrocarbon gas compressors• Inert gas systems• LNG fuel systems• LNG liquefaction• LNG re liquefaction• LNG regasification• LPG cooling
• LPG & ethylene re liquefaction• Nitrogen generators• Oil and water separation VIEC®• Power plant solutions• Propulsion systems• Pump room systems• Riser tensioning compressors• Ship design & consultancy• Thrusters and positioning systems• VOC recovery• Wastewater treatment• Zero flaring systems
SERVICESA Wärtsilä integrated solution can include, not only a wide range of products and systems, but also a comprehensive portfolio of services throughout the lifecycle of a project’s development, execution, instal-lation and subsequent operations. With our services and expertise, we aim to mitigate completion risks, optimise operational efficiency, and minimise operat-ing risks, thereby allowing yards, owners and opera-tors to concentrate on their core business. Services provided are eg.: Feasibility studies, FEED support services, financial and marine lifecycle consultancy, project management services, integration engineering services, on-site support, commissioning services, as well as everything from basic support with parts, field service and technical support to service agreements and condition based maintenance.Through our Services organisation featuring 11,000 dedicated professionals in 70 countries, we offer expertise, proximity and responsiveness for all customers regardless of their equipment make in the most environmentally sound way.
REFERENCESThe products and systems that make up Wärtsilä’s portfolio for the oil & gas sector amount to hundreds of project references delivered over several decades. Detailed reference lists for any products or systems are available upon request.
Contact person: Stein ThorsagerTitle: Business Development ManagerE-mail address: [email protected] website: wartsila.com
ELECTRIC/AUTOMATION/TELECOMPROCESS EQUIPMENTROTATING EQUIPMENTOTHER MECHANICAL EQUIPMENT
DRILLING SYSTEMS
82
Backpage image: Source: Dwellop as
83
INTSOK, OsloHoffsveien 23 OsloNorwayPhone: +47 22 06 14 80
INTSOK, StavangerProf. Olav Hanssensvei 7a Stavanger NorwayPhone: +47 51 87 48 80
INTSOK, Bergen Godvikveien 58GodvikNorwayPhone: +47 90 56 03 35
[email protected] WWW.INTSOK.COM
PROMOTING NORWEGIAN OIL AND GAS CAPABILITIES IN INTERNATIONAL MARKETS
Layout & Design: G
alston Design