BrainLAB’s Digital Lightbox TraumaCad Touch

Guide

BrainLAB’s Digital Lightbox 2

Contents

Navigation .................................1Getting Started........................2Selecting a Procedure ...........2Calibration Tab.........................3Templates Tab ..........................4Templating Buttons ...............5Measurements Tab .................6Fragments .................................7OrthoWeb Tab..........................8TraumaCad Buttons ...............9

NavigationThere are several finger gestures to navigate and interact with TraumaCad Touch (“TC Touch”) for selecting buttons, tabs or objects, rotating objects and zooming & panning images just as you would using a mouse.

Touch / TapSimilar to left click in mouse control. When selecting items on the screen, such as the tabs, large on-screen buttons, tem-plates or other objects, simply touch them with your finger. Apply some pressure with your finger pad when touching an item on the screen. Lift your finger when completed.

SwipeTo swipe means to drag your finger vertically or horizon-tally across the screen. For example, to perform finger scrolling, such as Implant size selection, slowly swipe your fin-ger vertically across the screen to finger scroll.

TraumaCad Touch | Guide 1

To zoom in (magnify)Start with pinched fingers, and then spread them apart.

To zoom out (make smaller)Start with separated fingers and bring them together. You may also perform these operations with one finger from each hand, if that is more convenient.

To rotate an objectTouch the object with your thumb in the location you would like to define as center of rotation and apply some pressure. With your second finger touch another point of the object and slide your finger left or right to rotate the object around your thumb.

If a larger “turn handle” is de-sired, plant one finger at the de-sired center of rotation and use a finger from your other hand, far away from the first finger, to simulate a larger turning handle. This method may often provide for finer control over rotation.

Slide / DragSliding on the touch-screen also involves dragging with your finger, but you need to press and hold your finger with some pressure before you start to drag. While dragging, do not re-lease your finger until you have reached the target position. The following are some instances when you would use sliding:• Drag&droptemplatesinto

the image – touch to select templates from the list on the left, and slide over into the image.

• Movingobjects(templatesor measurement tools for instance) from one location to another.

• Rotatinganobject–touchtheyellow dot on the top of the object highlighted box and slide your finger left or right to rotate the object around its center of rotation.

Navigationcontinued

Multi TouchTC Touch recognizes a two-finger touch to zoom or to rotate

BrainLAB’s Digital Lightbox 2

Getting startedTostartplanningselectanimagefromDigitalLightbox,touchtheTraumaCad button to start the application.

Selecting a ProcedureTouch the desired surgical or analysis procedure button. The chosen procedure determines the relevant templates and measurement tools that will appear in the application.

TraumaCad Touch | Guide 3

Define image orientation1. View - AP or LAT2.Laterality–LeftorRight

Calibration Tab You must set up the image and calibrate it before starting templating.

Calibrate imageTo use an image for quantitative measurements, the image must be calibrated to the actual bone size. There are 3 ways to calibrate an image:

TraumaCad automatically searched for a metal ball as a marker. If a marker is detected, the Automatic calibration will be the default choice: the ball should be circled and the size shown is 25.4mm (1 Inch).

To manually indicate the posi-tion of the marker you can use a ruler tool.

Touch the “Manual” button to select the manual calibration and then draw the marker by dragging your finger on the im-age. Touch the Marker Size field to open the virtual keyboard. Enter the marker size and touch the OK button or Cancel to close the keyboard.

You can manually resize the im-age by entering a percentage in the Oversize field.

Touch the percentages field to open the virtual keyboard. Enter the oversized number (which represents the typical, or presumed, magnification) and touch the OK or Cancel button to close the keyboard.

Touch the button when all fields are marked to your satisfaction.

The calibration status of the im-age appears in the lower-right corner of the image.

Once the image is set up you can start templating.

BrainLAB’s Digital Lightbox 4

1. Touch the Manufacturer field to open the implant manu-facturer list. Touch the desired manufacturer to select it.

2. Touch the Types of Implants field to select the implant type.

3. A list of implants matching your selection appears in the Implants tab.

4. You can also do a free search for your favorite implants.

Touch the Look for text box to open the virtual keyboard and enter your search, when finished touch OK or Cancel to close the keyboard.

Touch the button to start

the search.

Mark the checkbox if looking

for an implant regardless of the selected procedure.

5. Select a template from the Implants tab and drag it onto the image.

6. The template appears on the image.

Once the template appears in the image you can:• Touchanddragitwithyour

finger.• Rotateitusingthetwo-finger

multi-touch method, or by sliding the yellow dot.

Template will rotate around

the red pivot point (center of rotation).

Templates Tab

Start Templating

TraumaCad Touch | Guide 5

Templating Buttons

When a template is selected, it appears with a highlighted box surrounding it. Each template has different attached buttons:

Implant Properties

Touch the implant properties button to open a selection of properties such as implant, off-set, attachment point, external or internal diameters, etc. In case the list is long slowly swipe your finger vertically across the screen to scroll.

Group and Ungroup

Appears when more than one object is selected (template, fragment or measurement tool). As you touch the Group button, the selected objects will be grouped and can be moved and rotated as a single object.

The button will change to Ungroup, in case you wish to ungroup the objects.

Create a Kit

Appears when two or more templates are selected.

Select two templates and touch the “Create a Kit” button. A vir-tual Keyboard will automatically open and you can type a name for your kit. Once you save the kit’s name it will be added to your “Kits” tab.

Screw Properties

Appears when a screw is selected, next to the plate’s highlighted box but will refer to the selected screw. Touch the “Screw Properties” button to open a selection of proper-ties such as: Lock Screw, Unlock Screw,RemoveScrewandRemoveAllScrews.

Attach to Cup and Detach Cup

Appears in the Auto-Hip proce-dure next to the Stem high-lighted box. Touch the button in order to attach the stem to the cup.

Once the stem is attached to the cup, the button will change to“DetachCup”andyoucantouch it to detach the stem from the cup.

BrainLAB’s Digital Lightbox 6

Measurements Tab

Accurate measurements can be taken using a variety of orthopedics tools provided by TraumaCad with detailed illustrations and wizards.

Procedure-specific measurement tools are shown on the Measurements tab. There is a detailed illustration for every measurement tool describing how to use it.

The most frequently used tools can also be accessed from the right toolbar as well.

TraumaCad Touch | Guide 7

Fragments

Fragments can help you simulate your operation results, for instance in osteotomies or fracture reductions.

1. Touchtoselectthe“DefineFragment” button in the left toolbar.

2. Make a series of clicks along the outline of the fragment.

3. Tap twice to close the outline drawing of the fragment.

4. You have now created a closed shape that can be dragged to a new position.

5. You can reshape the frag-

ment outline by dragging any of the red points on the outline.

6. Touch the yellow dot and slide it right or left to rotate the fragment around its center of rotation .

You can also drag this pivot

point to a new location and then rotate the fragment around it. The rotation angle appears next to the fragment highlighted box. Multi-touch rotation is also possible.

7. Resetfragment–Returna

manipulated fragment to its original position and location by touching the button.

BrainLAB’s Digital Lightbox 8

OrthoWeb Tab

Login to OrthoWebInsert your login and password and touch the “Login” button to login to your OrthoWeb account. Once you are logged-in you can view your OrthoWeb cases and upload cases to your account.

Easy Access login1. InsertEasyAccessKeytoDLB

2. Enter your PIN number in the virtual keyboard

3. Easy Access will be blocked after 3 consecutive mistrials.

4. Pulling Easy Access key will log you out from your account.

OrthoWeb is a highly-secure, web-based envi-ronment allowing you to bypass the technical issues often encountered when moving images around to different locations— the clinic, the home, the hospital, or the operating room.

If you do not have an OrthoWeb account, contact Global Support Center:support@traumacad.com.

Learn more about OrthoWeb on the web: www.orthoweb.com

TraumaCad Touch | Guide 9

RedoRepeatslastcancelledstep

ExitExits the application

LineDrawsalinebetweentwopoints on the image

Change ProcedureChanges the procedure selected for surgery or analysis

Clear ImageClears image from planning

Transpose Transposes implant’s orientation between AP and LAT views

Text AnnotationAdds textual annotation to the image

Save CaseSaves TraumaCad Case

DeleteDeletesaselectedmea-surement tool or implant

Copy ImplantDuplicatesaselectedimplant

Free Hand LineDrawsacurvedline on the image

Download TemplatesDownloadstemplatesfrom Orthocrat global server

Invert ImageReversestheareasofblack/white on the image

Flip ImplantFlips the selected implant or fragment left/right

Reset FragmentReturnsamanipulatedfragment to its original position

Image Mode Zooms the image in or out, and pans it

Fit to ScreenFits the image to full window size

RulerMeasures the distance between two points

Duplicate FragmentDuplicatesafragment of the image

Window/LevelAdjusts the brightness/contrast of the image

Flip HorizontalFlips the image horizontally

AngleMeasures an angle

Define FragmentDrawsalinearoundafragment and cut it

Multi Selection Selects two or more objects in the image

Flip VerticalFlips the image vertically

CircleMeasures the diameter of any round object

Undo Cancels last step

About Us Interline AngleMeasures the angle between two lines

TraumaCad Buttons

OrthocratBridge your orthopedic workflow gap

US: 866-717-0272 UK: 0800-4048204

Europe: 00-800-9290-9290 International: +972-3-929-0929

Baltimore | Tampa | London | Tel Aviv

www.orthocrat.com