trio tp350 series - global.weir
TRANSCRIPT
Trio® TP350 Cone Crusher Trio® TP cone crushers are designed for customers producing cubical aggregates or who need maximum size reduction at a high production rate. Cast in high-strength alloy steel with an optimised design, Trio® TP cone crushers deliver maximum strength and durability in demanding applications.
All Trio® TP cone crushers feature a steep crushing chamber angle, a large crushing stroke, a high pivot point, and optimised speed to deliver a finer product through increased inter-particle comminution.
Being Synertrex® enabled means that customers can monitor the operation and health of their crusher, whether on-site or away. This technology also provides component replacement recommendations and machine optimisation advice.
The closed side setting (CSS) of Trio® TP cone crushers can be easily adjusted using the threaded bowl and hydraulic gear drive. Operating controls consist of a fully integrated hydraulic console with push-button controls for clamping, clearing and adjustment. These crushers can be operated remotely and can be fully integrated into the plant’s control system if required.
In addition, Trio® TP series cone crushers feature a self-contained, climate-controlled oil lubrication skid with Programmable Logic Controller (PLC) with HMI and condition monitoring sensors. To extend the life of your crusher even under maximum load, Trio® TP cone crushers also feature leaded bronze bushings.
All key components feature a high-strength alloy steel construction for long and reliable performance under severe crushing conditions. The pedestal main shaft and spiral bevel gears are also machined from high-strength alloy steel forgings.
Designed to maximise performance, our entire range of crushing and grinding equipment is backed by the Weir Minerals service network, operating in over 70 countries across the globe.
Design features
• Steep crushing chamber angle
• Large crushing stroke
• High pivot point
• Synertrex® enabled
• Threaded bowl with hydraulic gear drive for precise closed side setting (CSS) adjustment
• Fully integrated hydraulic console with push button controls
• Leaded bronze bushings
• Self-contained, climate-controlled oil lubrication skid with Programmable Logic Controller (PLC) with HMI and condition monitoring sensors
• Spiral cut bevel gear set with hardened teeth and pinions to ensure quiet, smooth and efficient horsepower transmission
• Cast high-strength alloy steel with an optimised design to deliver maximum strength and durability
Applications
• Secondary stage crushing circuits
• Tertiary stage crushing circuits
• Quaternary stage crushing circuits
• Specification size and/or shape for aggregate crushing
• Crushing ore for maximum reduction, leaching or milling operation
Left: Trio® TP900
Minerals
Trio® TP350 Series Cone Crusher
Technical Specifications
Copyright © 2019, 2021, Trio Engineered Products, Inc. All rights reserved. The trademarks mentioned in this document are trademarks and/or registered trademarks of companies forming part of The Weir Group PLC. WMD0979/202109
Please note: Drawings not to scale. A bulk density of 1.6t/m3 and Wi of 16 formed the basis of the capacities above. Please contact your local Weir Minerals representative for more information
Weir Minerals
www.global.weir
Trio® TP350 Series Cone Crusher
SHORT HEAD FINE
CHAMBER
SHORT HEAD MEDIUM
CHAMBER
SHORT HEAD COARSE
CHAMBER
STANDARD FINE
CHAMBER
STANDARD MEDIUM
CHAMBER
STANDARD COARSE
CHAMBER
Closed Side Setting Range CSS6mm-25mm (0.23"-0.98")
10mm-22mm (0.39"-0.87")
13mm-25mm (0.11"-0.98")
16mm-45mm (0.62"-1.77")
19mm-45mm (0.74"-1.77")
25mm-45mm (0.98"-1.77")
Maximum Feed Size95mm-119mm (3.74"-4.69")
122mm-137mm (4.8"-5.39")
145mm-157mm (5.7"-6.18")
177mm-210mm (6.97"-8.27")
203mm-232mm (7.99"-9.13")
223mm-245mm (8.78"-9.65")
Production Capacity Range 113-297 MTPH 170-330 MTPH 231-363 MTPH 234-401 MTPH 280-445 MTPH 363-490 MTPH
Trio® TP350 Series Cone Crusher General Arrangement Drawing
Typical Physical Properties
Crusher head diameter 1133mm (44.6")
Weight 18,500kg (40,786lbs)
Eccentric throw 80.4mm (3.16")
Pinion shaft speed 870-1024 rpm
Power 250kW 350HP
Materials of Construction
Main shaft Alloy steel – ASTM A29, Gr 4135
Eccentric bushing Leaded bronze – ASTM B505-93800
Head Cast steel – ASTM148 Gr 80-50
Bowl Cast steel – ASTM148 Gr 80-50