Upload File

tstud e84 flame spread test info

1
Flame Spread Test performed by Underwriters Laboratories (UL) on the Tstud™. 90% of the Tstud™ remained in tacked after a 10 minute burn at 3500 degrees. In all fairness to the 2x6, UL stated there would be nothing left of the 2x6 if we tested one, so am giving the 2x6 the benefit of the doubt. ASTM E84 Flame Spread Test. Tstud™ vs a 2x6. Tstud™ scored a 23.72 giving it a Class A Fire Rating. 2x6 SPF scores 80-130. www.Tstud.com for more information Tstud™ sales at Patriot North America, LLC contact Brian Iverson @ 612.290.6199 or [email protected] Coming Soon!

Upload: brian-iverson

Post on 14-Apr-2017

28 views

Category:

Documents


3 download

Report

TRANSCRIPT

Page 1: Tstud E84 Flame Spread Test info

Flame Spread Test performed by Underwriters Laboratories (UL) on the Tstud™. 90% of the Tstud™ remained in tacked after a 10 minute burn at 3500 degrees.

In all fairness to the 2x6, UL stated there would be nothing left of the 2x6 if we tested one, so am giving the 2x6 the benefit of the doubt.

ASTM E84 Flame Spread Test. Tstud™

vs a 2x6. Tstud™ scored a 23.72

giving it a Class A Fire Rating. 2x6 SPF

scores 80-130.

www.Tstud.com for more information

Tstud™ sales at Patriot North America, LLC contact Brian Iverson @ 612.290.6199 or [email protected]

Coming Soon!

http://www.tstud.com/

FOAMGLAS HIGH LOAD BEARING CELLULAR GLASS …...E84 Flame Spread Index 0 / Smoke Development Index 0 To contact by phone or email: Industrial & Commercial Sales Americas +1 724 327

Decomposition, Ignition and Flame Spread on Furnishing ... · Decomposition, Ignition and Flame Spread on Furnishing Materials A thesis submitted in fulfillment of the requirement

Upward Flame Spread of an Inclined Fuel Surface

ECOPHON® FOCUS™ Ds · Type XII, Form 2, Pattern G FIRE CLASS (ASTM E1264) All are Class A per ASTM E84 & CAN S102 Flame Spread: 25 or less Smoke Developed: 50 or less MOLD/MILDEW

Flame-Front Rate of Spread Estimates for Moderate Scale

Fiberon Decking - Progressive Engineering Inc · Standard Compliance ASTM E84 - Test Methods for Surface Burning Characteristics of Building Materials [Flame Spread Index not exceeding

Development of a new apparatus to measure flame spread

Metropolitan - Panaria · described in ASTM E84 - Standard Test Method for Surface Burning Characteristics of Building Materials. This is due to the flame spread rating of (O) and

Independent Laboratory Testing Flame Spread Index and

Correlations for Inclined Flame Spread

Vertical Flame Spread, Some Notes on Dimensional Analysis

UNIMAS 11111111 IYII11IUINN11IM 1000166054 of flame spread on plywood.pdfBORANG PENGESAHAN STATUS TESIS Judul: EXPERIMENT OF FLAME SPREAD ON PLYWOOD SESI PENGAJIAN : 2001/2006 Saya,

NvelopeNvelope ee Nois-Nois- - PRWebww1.prweb.com/prfiles/2016/02/12/13213945/Nois-eNvelope Brochure_sm...ASTM E84 Flame Spread 15 ... 6843 McDougal Court 6871 Belford Industrial Drive

ECOPHON® FOCUS™ B, F, SQ · Type XII, Form 2, Pattern G FIRE CLASS (ASTM E1264) All are Class A per ASTM E84 & CAN S102 Flame Spread: 25 or less Smoke Developed: 50 or less MOLD/MILDEW

Radiant Panel Flame Spread Apparatus digital...Spread Apparatus (ASTM E162; ASTM D3675) Radiant Panel Flame Spread Apparatus_digital 15/07/2020 14:02 Page 1 FIRE TESTING TECHNOLOGY

Flame virus spread through rogue Microsoft security certificates

LEED - Ceilings from Armstrong · ASTM E84 and CAN/ULC S102 surface burning 0.58 lbs/SF; 48 SF/ctn characteristics. Flame Spread Index 25 or less. Smoke Developed Index 50 or less

On upward flame spread on thick fuels Thomas, Philip ...lup.lub.lu.se/search/ws/files/4585546/4451536.pdfPHILIP THOMAS BJ~RN KARLSSON ON UPWARD FLAME SPREAD ON THICK FUELS Research

Evaluation Report ESR 3398 - Johns Manville...flame-spread index of 25 or less and a smoke-developed index of 450 or less when tested in accordance with ASTM E84 at a maximum thickness

Aerocel SaniGuard 100120 · 2020. 10. 8. · Flame Spread:

Field Modelling of Non-Charring Flame Spread · Field Modelling of Non-Charring Flame Spread MJ Lewis, ... on their projected inclusion in zone ... permit the conjugate solution for

FULL-SCALE BURNING TESTS ON FLAME SPREAD OF · PDF fileResearch Centre for Fire ... Flame spread over the surface of three selected plastic samples will be discussed in this paper

Flame Spread Analysis using a Variable B-Number · Flame Spread Analysis using a Variable B-Number ALI S. RANGWALA Assistant Professor Department of Fire Protection Engineering -

Unsteady Flame Spread in Microgravityronney.usc.edu/AME514/MicrogravityLectures/MicrogravityLecture1/... · INHERENTLY UNSTEADY FLAME SPREAD TO EXTINCTION OVER THICK ... plied at

Downward flame front spread in thin solid fuels: theory and

Enerfoil - IKO Global · Codes Compliances ASTM E84 Flame Spread Inde 5 Smoke Density Inde 50 CANUC S102 Flame Spread Inde Canada 5 ASTM C1289 CANUC S704 CCMC CANUC S42 Type 1

ENVIRONMENTAL P D ECOTOUCH FLAME SPREAD … EPD - EcoTouch Flame...EcoTouch® ®Flame Spread 25 FIBERGLAS™ Insulation with PureFiber Technology ... Flame Spread 25 insulation may

Experiments and modelling on vertical flame spread

 · Web viewEffect of ignition condition on the extinction limit for opposed flame spread over electrical wires in microgravity Abstract Flame spread over wire insulation plays a

WoodPanels DS CTCDTP-08-807 2004 E...SURFACE FINISH Clear or tinted top with 20% sheen FIRE CLASS (ASTM E1264) Class A (Composite) per ASTM E84/ULC S102 Flame Spread: 25 or less Smoke

Flame Spread Characteristics of Fire Retardant Fabrics

Local Flame Attachment and Heat Fluxes in Wind-Driven Line ... · 5 Keywords: Heat flux, flame attachment, wind-driven flame spread, wildland fire, concurrent spread 1. Introduction

Metropolitan · described in ASTM E84 - Standard Test Method for Surface Burning Characteristics of Building Materials. This is due to the flame spread rating …

Evaluation of FDS V.4: Upward Flame Spread · 2006-10-05 · experimental data for upward flame spread on a 5 m PMMA panel. A simplified flame spread model is also applied to assess

CAD/Revit drawings at...Fire Performance Class A: ASTM E84 and CAN/ULC S102 surface ® burning characteristics. Flame Spread Index of 25 or less. Smoke Developed Index of 50 or less