tt iadc specifications - 2015

8/16/2019 Tt Iadc Specifications - 2015

1/61

Teras Titanium

TERAS TITANIUM

RIG GENERAL DESCRIPTION & EQUIPMENT LIST


2/61

Teras Titanium

Page 2 of 61 ised: 30/05/15

NOTE: This form is a suggested guide only and use of this form or any variation thereof shall be at the sole discretion and risk of theuser parties. It should be noted that the presence or absence of any equipment does not imply applicability of such equipment for aparticular drilling project. The International Association of Drilling Contractors and CAPE International disclaim any liabilitywhatsoever for loss or damages which may result from use of the form or Portions or variations thereof.

INTERNATIONAL ASSOCATION OF DRILLING CONTRACTORS STANDARD FORMAT EQUIPMENT LIST

JACK-UP DRILLING UNIT

INSTRUCTIONS: The Standard Format Equipment List has been developed to provide a comprehensive summary of allrelevant items of equipment and to streamline the tender process for both contractor and operator. In order to obtainmaximum efficiency, users are advised to maintain the precise order of the format and to request/provide anyadditional information on specific equipment as an addendum, referring to the appropriate section number.

TABLE OF CONTENTS

SECTION A - UNIT SPECIFICATIONS

General

A1 Main Dimensions/Technical Description A2 Storage Capacities A3 Jackup Systems A4 Operational Capabilities A5 Variable Loading A6 Environmental Limits

A7 Mooring System A8 Marine Loading Hoses A9 Cranes, Hoists, and Materials Handling A10 Helicopter Landing Deck A11 Auxiliary Equipment

SECTION B - GENERAL RIG SPECIFICATIONS

B1 Derrick and Substructure B2 Drawworks and Associated Equipment B3 Derrick Hoisting Equipment

B4 Rotating System

SECTION C - POWER SUPPLY SYSTEMS

C1 Rig Power Plant C2 Emergency Generator

SECTION D - DRILLSTRING EQUIPMENT D1 Tubulars D2 Handling Tools D3 Fishing Equipment

SECTION E - WELL CONTROL/EQUIPMENT

E1 Diverter BOP


3/61

Teras Titanium

Page 3 of 61 ised: 30/05/15

E2 Low Pressure BOP E3 High Pressure BOP E4 Other Blowout Preventers E5 BOP Control System E6 Choke Manifold E7 Flexible Choke & Kill Lines (BOP to Manifold) E8 Flexible BOP Control Hoses E9 BOP Testing Equipment E10 BOP Handling

SECTION F - MUD SYSTEM/BULK SYSTEM

F1 High Pressure Mud System F2 Low Pressure Mud System F3 Bulk System

SECTION G -CEMENTING EQUIPMENT

G1 Cement Equipment

SECTION H - INSTRUMENTATION/COMMUNICATION

H1 Drilling Instrumentation at Driller's Position H2 Drilling Parameter Recorder H3 Instrumentation at Choke Manifold H4 Standpipe Pressure Gauge H5 Deviation Equipment H6 Rig Communication System H7 Environmental Instrumentation H8 Navigation Instrumentation H9 External Communications Equipment

SECTION I

SECTION J - WORKOVER TOOLS

SECTION K - ACCOMMODATION

K1 Offices K2 Living Quarters

SECTION L - SAFETY EQUIPMENT

L1 General Safety Equipment L2 Gas/Fire/Smoke Detection L3 Fire Fighting Equipment L4 Breathing Apparatus L5 Emergency First Aid Equipment L6 Helideck Rescue Equipment L7 Emergency Warning Alarms L8 Survival Equipment

SECTION M - POLLUTION PREVENTION EQUIPMENT

M1 Sewage Treatment M2 Garbage Compaction M3 Garbage Disposal/Grinder M4 Oily Water Separator


4/61

Teras Titanium

Page 4 of 61 ised: 30/05/15

A. UNIT SPECIFICATIONS

Rig Type 116-C Unit/design/shape 3 legged Modu, Triangular Unit flag Marshall Islands Unit classification Cantilever Self Elevating Offshore

Platform, 3 Legged Modu

IMO Certification Yes/no: Yes 8754671

Year of construction Sep-80 Construction yard Vicksburg, Mississippi

A.1 MAIN DIMENSIONS/TECHNICAL DESCRIPTION

Light ship 18873.03 Kips Displacement at loadline 22619.970 Kips Overall Length of unit (including helideck) 243.08 ft Overall width of unit (including anchor racks) 226 ft Hull length 243 ft 1 in Hull width 200 ft 6 in Hull depth 26 ft Number of legs/length 3/410 ft Leg length available below hull 358 ft Type of leg Square Leg spacing (center to center) 142 ft center Port leg to center Stbd leg and

129 ft center of Bow leg to Transverse centerof Aft legs

Independent leg or matt Independent Leg Spud can diameter/bearing area 46 ft / 1585 sq ft Spud can height 24 ft Spud can jetting system Yes

Mat dimensions N/A

Cantilever or slot Cantilever Skid-off 52 ft aft of transom w/ cantilever extension

w/ reduced drilling loads

Cantilever envelope 24ft x 45ft Reach AFT, from/to 24ft / 52' W ITH EXTENSIONS Transverse, Port/STB 12FT either side Slot dimensions N/A

Mat slot dimensions N/A

Max. cantilever load 800 Kips, exclusive of Substructure, 270lbs/sq ft between beams

Max. rotary load 1200 kips Max. setback load 450 Kips Fuel consumption (avg. drilling) 65 bbls/day (Normal operation) Accommodation for maximum no. of personnel 110 (See K.2.1)

A.2 STORAGE CAPACITIES

Fuel 3089 bbls Drill water 11696 bbls Potable water 1078 bbls


5/61

Teras Titanium

Page 5 of 61 ised: 30/05/15

Mud processing tank (see F.2) 50 bbls Active liquid mud (See F.2) Independent oil base mud storage 1467 bbls Independent base oil storage N/A Independent brine storage 27553.3 bbls Bulk bentonite/barite (See F3) 5440 cu ft Bulk Cement (See F3) 5440 cu ft Sack storage 3500 sacks Pipe rack Miscellaneous storage area 3300 cu ft (below deck) Preload capacity 11945 KIPS

A.3 JACKUP SYSTEM

A.3.1 Jacking Systems

Make/type LeTourneau / Rack and Pinion No. of jacks or pinions 16 pinions per leg / 3 legs Maximum jacking load 375 kips/ motor Jacking speed 90 ft/hour Rack chocks available Yes/no: No

Yes/no: Yes/no:

A.3.2 Raw Water Systems (A Frame)

Pump location (Main Deck) Main Deck Suction distance below hull (max.) 101 FT. Pump Manufacturer PLEUGERModel QT14ENL-3a & MI10-880-4Type QN103-2a+MI10-490-2Rating 500 m3/hr x 60 m headElectrical 116 kw @ 1750 rpm, 460v / 3 phase / 60Hz.QTY (2) each Material Nickel Aluminum Bronze Construction

Impeller in Stainless Steel DuplexRated Current 184 ASpeed 3480 I/minRated Motor Power 141 HP

Dedicated preload pumps The above Two Salt water pumps are utilizedfor preload

Winch Model # JMCapacity 5tonRope Length 110mRated pull force 50KNSpeed 9.5m/minRope diameter Φ21.5mm

11KWMotor model YZR160LPower supply 110V, 60HZ, 3Phases

A.4 OPERATIONAL CAPABILITIES

Maximum designed water depth capability 300 ft w tide and leg penetration of 25 ft Outfitted max/min water depth capability 300 Normal minimum water depth capability 26 ft Draft at load line (deepest) 15.47 Drilling depth capability (rated) 30000 ft Transit speed towed (historical avg) N/A Leg (spud can) below hull in transit N/A Maximum leg length permitted in tow N/A

Number of tugs for field tow 3 Associated minimum bollard pull per tug Ocean tow : 12000

Field tow : 9000


6/61

Teras Titanium

Page 6 of 61 ised: 30/05/15

Anti-roll system Yes/no: NO Maximum preload reaction per leg 11,000 kips Bearing pressure at maximum preload Thrusters N/A

A.5 VARIABLE LOAD CAPACITY (VL)

Transit VL capacity 3461.3 KIPS Drilling VL capacity 4961.3 KIPS Survival VL capacity 3461.3 KIPS Jacking VL capacity 3461.3 KIPS

A.6 ENVIRONMENTAL LIMITS

Transit N/A Max. wave height Rig Movers Discretion

Max. wave period N/A Max. wind velocity 60 mph Max. current velocity 2 Knot Max. heave (double amplitude) N/A Max. pitch (double amplitude) degrees: 6 degree single amplitude Max. roll (double amplitude) degrees: 6 degree single amplitude

Working water depth 300 FT. Drilling Maximum 50 ft seas with 70 knot wind gust Survival Maximum 60 ft seas with 90 knot wind gust

Working water depth Drilling 300 FT. Survival 300 FT.

A.7 MOORING SYSTEM

A.7.1 Anchor Winches

Quantity 02

Make/model Marathon LeTourneau W-1500-TSType (electric/hydraulic/diesel) ElectricTotal HP per winch 75 HPRated pull Pull Rated Capacity 27.2 T or 60000 lbControl locations (local/remote/both) Local

A.7.2 Anchors

Quantity 02Make/type Weight

A.7.3 Anchor Lines

Wire 1 1/2 “ size

A.7.4 Towing Gear

Towing bridle size Dia. 3 in x 60 ft stud chain, one end fitted withN° 7 Pear Link 1 x Towing plate 30 in x 30 in x3 in thick 1 x Towing line Dia. 2 ½ in x 25 m 82ft)

Hook-up system Smith BracketRating 250Spare bridle No

A.7.5 Supply Vessel Mooring System

System description 2 lines- 1-4'' x 45ft. 1-- 4'' x 65ft. Rating N/A Location (Port/stbd/both) Port


7/61

Teras Titanium

Page 7 of 61 ised: 30/05/15

A.8 MARINE LOADING HOSES

Location of loading manifolds (Port/stbd/both) Port

A.8.1 Potable Water Hoses

Quantity 1 Size 3'' Make/type FLEX IMAK Color coding Yes/no: Yes Make/type connection Hammer Union

A.8.2 Drilling Water House

Quantity 1 Size 3'' Make/type FLEX IMAK Color coding Yes/no: Yes Make/type connection Hammer Union

A.8.3 Fuel Oil Hose Quantity 1 Size 3'' Make/Type FLEX IMAK Color coding Yes/no: Yes Make/Type connection Hammer Union

A.8.4 Mud Chemical Hose

Quantity 1 Size 4'' Make/Type FLEX IMAK Color coding Yes/no: Yes Make/Type connection Hammer Union

A.8.5 Cement Hose


A.8.6 Base Oil Hose Same as liquid mud hose

Quantity Size Make/Type Color coding Yes/no: Make/Type connection

A.8.7 Brine Hose


A.8.8 Other Chemical

Use Quantity 1 Size 5'' Make/type FLEX IMAK Color coding Yes/no: Yes Make/Type connection Hammer Union

A.9 CRANES, HOISTS, AND MATERIAL HANDLING A.9.1 Cranes Revolving

Quantity Three (3) Specification (API, etc.) LeTourneau PCM-120


8/61

Teras Titanium

Page 8 of 61 ised: 30/05/15

Make LeTourneau Inc. Type PCM-120 Location (frwd/aft/Port/stbd) One each in Port, Stbd, Port Aft Boom length 100 ft each Hook reach below main deck (block/whip) Block capacities and hoisting speeds 50 ton @25' Whip capacity and hoist speed N/A Hook load indicator automatically Yes

Yes/no: Yes

Automatic brake Yes/no: Yes Safety latch on hooks Yes/no: Yes Crown saver (limit switch) Yes/no: Yes Boom illumination Yes/no: Yes

Quantity Specification (API, etc.)

A.9.2 Forklifts NA

Quantity Make/Type Rated capacity Explosion proof Yes/no: A.9.3 Monorail Overhead Cranes 1.4.8.6

Quantity One (1) Make JD Neuhaus Type Trolley type Rated capacity 47.5 Ton, Main travel crane max speed=5/25

m/min, Cross travel (trolley) max speed=5/12m/min, Hoist max speed=0,50 / 1,1 [m/min]lifting / lowering

Location(s) BOP Deck

A.9.4 Air Hoist/Derrick Winches A.9.4.1 Rig Floor Winches (Non man-riding) 1.4.5.13

Quantity One (1) Make Ingersoll Rand Type TNC 602040 W DP Rated capacity 2 Ton Wire diameter Automatic brakes Yes/no: Overload protection Yes/no: Automatic spooling Yes/no:

Quantity 2 Make Ingersoll-Rand

Type K6UL Rated capacity 5000 LB W ire diameter 5/8'' Automatic brakes Yes/no: NO Overload protection Yes/no: NO Automatic spooling Yes/no: NO

A.9.4.2 Monkey Board Work Winch

Quantity One (1) Make Ingersoll-Rand Type EUAGP-PT Rated capacity 200 lbs W ire diameter Yes/no: Automatic brakes Yes/no: Yes Overload protection Yes/no:

mailto:@25mailto:@25


9/61

Teras Titanium

Page 9 of 61 ised: 30/05/15

A.9.4.3 Rig Floor "Man-Riding" Winch

Quantity 1 Make Ingersoll Rand Model FA150KGI/D10064Type MC336A-250-38-0 SR # KG015269Rated capacity 335 LB W ire diameter 1/2'' Non-twisted wire Yes Automatic brake Yes/no: Yes Overload protection Yes/no: NO Automatic spooling Yes/no: Yes Certified for man-riding Yes/no: Yes

A.9.4.4 Utility Winch (i.e. Deck Winch)

Quantity 1 Make Ingersol-Rand Type K6UL Rated capacity 5000 LB W ire diameter 5/8'' Automatic brake Yes/no: NO Overload protection Yes/no: N Automatic spooling Yes/no: NO Certified for man-riding N Locations BOW

A.9.4.5 BOP Hoists (see E.10.1)

A.9.5 Transfer Baskets/Containers N/A

A.9.5.1 Personnel Transfer Baskets One (1) Billy Pugh Model X-871 PersonalTransfer with safety load line

A.9.5.2 Cargo Containers N/A

Quantity Make/Type

A.10 HELICOPTER LANDING DECK

Location (frwd/aft/Port/stbd) Stbd Dimensions 60 ft in Diameter Perimeter safety net Yes/no: Load capacity 51250 lbs Designed for helicopter type Sikorsky S-61

Tie down points Yes/no: 4 Heli-refueling system type N/A Fuel storage capacity N/A Helideck lighting to aviation specification (see L.3.6) Yes/no:

A.10.1 Helicopter Refueling System N/A

System make/type N/A Fuel storage capacity Jettisonable Fuel transport container, quantity

Fuel transport containers

Covered by foam fire system (see L.3.6)

A.11 AUXILIARY EQUIPMENT


10/61

Teras Titanium

Page 10 of 61 ised: 30/05/15

A.11.1 Water Distillation

Quantity One (1) Make/Type C-Treat M# FD301-4 Split Skid Capacity (each/total) 7.5 GPM 10,800 GPD MAX Tag 500005629

A.11.2 Boilers N/A

Quantity Make/Type Capacity (total system)

A.11.3 Air Conditioning

Quantity 6 Make/Type Carrier Capacity (total system) 10 ton Max. temperature rating

A.11.4 Electric Welding Sets

Quantity wo (2) Current capacity 15 amp 115 VAC duplex receptacle allows

operators the flexibility to run grinders, drills,coolers, etc. from power source without the

eed for additional 115 VACower in weld area.

Make/model Miller Dimension 652 CC/CV Electric welder

A.12.5 High Pressure Cleaner

Quantity 2 Make/Type Diesel / Karcher Electronic/pneumatic/diesel Diesel / Karcher Max delivered pressure 230 BAR

Yes/no:

Quantity 1 Make/Type PSC ELECTRICAL Electronic/pneumatic/diesel PNEUMATIC Max delivered pressure 000 psi

Yes/no:

B.1 DERRICK AND SUBSTRUCTURE

B.1.1. Derrick/Mast

Make/Type Lee C Moore, Model W -15236-11 Rated for wind speed: N/A

Height 167 ft Dimensions of base 30 ft x 30 ft Dimensions of crown 7' 10'' X 7' 10'' Gross nominal capacity 1,250,000 lbs Static hook load 500 Ton Maximum Number of lines Yes/no: Yes, 12 lines Ladders with safety cages and rests Yes/no: Fall arrest cables Platform for crown sheave access Yes/no: Yes Counter balance, system for rig tongs and Yes

Yes/no: Lighting system explosion proof Yes/no: Yes

B.1.2 Racking Platform

Make/Type Total current simultaneous capacity - drill pipe N/A 5" DP 190 stands 6 - 5/8" DP 3- 1/2" DP Total current simultaneous capacity - drill pipe


11/61

Teras Titanium

Page 11 of 61 ised: 30/05/15

8" DC 9" DC 10 stands for 9-1/2" DC Tubing belly board Yes/no: NO

B.1.3 Automated Pipe Handling N/A

B.1.4 Casing Stabbing Board

Make/Type Deckard Manufacturing, Model "A" Board

Adjustable from/to height above rotary Stabbing Board with 37 ft of travel

B.1.5 Substructure

Make/Type LeTourneau Inc., Drill floor height (above main deck) 29 ft Length Width Setback capacity 450,000 lbs Simultaneous setback-hook load capacity Rotary beam capacity (total)

Clear height below rotary table beams

B.1.6 Weather Proofing

Rig floor windbreaks Wind Walls Derrickman windbreaks TarpAround process pits enclosed

B.1.7 TV Camera System

Camera located at Monkey & Stabbing Board

Make/Type Anson Zoom/Pan/Tilt-function Yes/no: Yes Model # HL-E8003dEx-proof Yes/no: Yes

B.2 DRAWWORKS AND ASSOCIATED EQUIPMENT

B.2.1 Drawworks

Make/Type National Oil Well, Model 1625-DE Motors make/type Two GE 752 High Torque Shunt Wound

Motors, Model 5GE752R6A

Rated input power 2500 hp Drum size (diameter x length) 36" Dia x 61-1/4" Long Drum type (grooved/smooth) Grooved

Break type (disk/drum) Drum Maximum line pull 12 lines 1520 kips Maximum line pull 10 lines 1300 kips Maximum line pull 8 lines 1065 kips Make up cathead type National Type "A1'' Breakout cathead type N/A Crown block safety devices Koomey TCB Crown-O-Matic System

Independent fresh water cooling system for Yes/no: Yes Crown block safety device model Koomey TCB Automatic driller Yes/no:

Input power continuous 2500 hp

B.2.2 Auxiliary Brake

Make Baylor El Maggo Model Model 7838 Independent back-up system type NOV


12/61

Teras Titanium

Page 12 of 61 ised: 30/05/15

B.2.3 Sandline N/A

Make Length capacity Line size/type Breaking strength Safe working load

B.2.4 Slickline Unit N/A

Make/model Wire length (nominal) Wire size Breaking strength Safe working load Depth counter Yes/no: Pull indicator

B.3 DERRICK HOISTING EQUIPMENT

B.3.1 Crown Block

Make/Type National Oil W ell, Model 760 FA Rated capacity 583 Tons No. of sheaves Seven(7) Sheave diameter 60" Sheave grooved for line size 1-1/2"

B.3.2 Traveling Block

Make/Type National Oil Well, Model 760 H Rated capacity 650 Tons No. of sheaves Six(6) Sheave diameter 60" Sheave grooved for line size 1-1/2"

B.3.3 Hook

Make/Type BJ, Model Dyna Plex Rated capacity 500 Tons Complete with spring assembly/hook locking Yes

Yes/no: Yes

B.3.4 Swivel N/A

Make/Type Rated capacity Test/working pressure Gooseneck and wash pipe minimum ID Left hand pin connection size Access fitting for wireline entry on top of

Yes/no:

B.3.5 Drilling Line Diameter 1-1/2" Construction 6 x9, IPS, RRL, IW RC Length (original) 10,000 ft Drilling line reel

Yes/no: Yes/no:

Spare drilling line Yes/no:

Roller guides Yes/no:

B.3.6 Dead Line Anchor

Make/Type National Type EB W eight sensor Yes/no: Deadline dampener Yes/no:

B.3.7 Block Guidance System (If Applicable)

Make/Type Wool Slayer


13/61

Teras Titanium

Page 13 of 61 ised: 30/05/15

B.4 Rotating System

B.4.1 Rotating Table

Make/Type ZP Model 375 Maximum opening 37.5" Rated capacity 900 kips Two speed gearbox Yes/no: Emergency chain drive Yes/no: NO Driven by an independent electric motor Yes/no: No( Drawwork motor)

Drip pan/mud collection system Yes/no: Yes

B.4.2 Master Bushings Yes ZP

Qty 01 SetMake/Type N/A Inserts bowls (see G.1.8) ZP Qty 01 Set

B.4.3 Kelly Bushing

Make/Type Lock down assembly Yes/no:B.4.4 Top Drive

Make Varco TDS - 4 Type (electric/hydraulic) Electric Rated capacity 650 TONS Test/working pressure 5000 PSI Output power 1130 hp Continuous

1365 hp Intermittent Maximum continuous torque 50100 ft lbs Two speed gear box Yes/no: Yes Maximum rotary speed 130 RPM LOW 180 High Remote operated kelly cock Yes/no: Cooling system type Flow 3200 CFM, HP 25, PSI 17" H2O, Heat

exchange 150,000 BTU/hr, Water supply 40GPM@250 ft of Head

Upper inside BOP (see also D.1.15)

B.4.4.1 Top Drive

Make/type Varco TDS - 4 Model TDS-4 Max. makeup torque Max. breakup torque Raised backup system Yes/no:

C. POWER SUPPLY SYSTEMS

C.1 RIG POWER PLANT Quantity Six (6) Make/Type Caterpillar Model D-3512 V12 Maximum continuous power 1281 hp @ 1200 rpm

Equipped with spark arrestors Yes/no: Yes Mufflers installed Yes/no: Yes

C.1.2 DC - Generator N/A

C.1.3 AC - Generator

Quantity 6 Make/Type Rockwell Automation Kato Continuous power 1050 KW Output volts 600 Volts AC

mailto:GPM@250mailto:GPM@250


14/61

Teras Titanium

Page 14 of 61 ised: 30/05/15

C.1.4 SCR System

Number of SCR Seven (7) Make/Type GE Maximum continuous power (total) Output volts

C.1.5 Transformer System

Quantity Three (3) Make/Type HAMMOND, Type 1000KVA Continuous power (each) Output volts 480 V Frequency 60 HZ

C.1.6 Emergency Shutdown

Emergency shutdown switches for the complete power system On Rig Floor (AC and DC), located at the following points In front of Living Quarters

C.1.7 Compressed Air Systems

Air Compressors - Cold Start Quantity One(1) Manufacturer Quincy Type 5 hp Diesel and Electric Pressure Rating 130 psi Air Compressors - Medium Pressure (rig air) Quantity One(1) Manufacturer Quincy Type QA1245-2 Pressure Rating 200 psi max / 173 cu ft min SR # 96049HOSI245ANA320Pressure Rating 130 psi

Air Compressors - Medium Pressure (rig air) Quantity One(1) Manufacturer Quincy Type

QA1245-2

Pressure Rating 200 psi max / 173 cu ft min SR # 96049HOSI245ANA320

Quantity Two(2) Manufacturer Quincy Type 370 Screw Type Pressure Rating SR # 93169J & 129135-1MOD # QSI370ANA325D

Air dryers Quantity Two (2) Manufacturer Quincy Type Model Opnc 750

Air Compressors - Low Pressure (bulk air) Quantity Two (2) Manufacturer Quincy Type Qslp-30 Pressure Rating 150 PSI

364.0 acfmSR # UN076485-6P # QSLP3000008

Air dryers 1 Quincy Model Opnc 500

C.1.8 Air Receivers Total Three (5)

Volume (total) 480 Gallon Pressure 150 psi


15/61

Teras Titanium

Page 15 of 61 ised: 30/05/15

Location Mud Pump Room

Volume (total) 480 Gallon Pressure 150 psi Location Mud Pump Room

Volume (total) 480 Gallon Pressure 150 psi Location Mud Pump Room

Volume (total) 480 Gallon Pressure 150 psi Location Rig Floor

Volume (total) 240 Gallon Pressure 150 psi Location Engine Room

C.2 EMERGENCY GENERATOR

C.2.1 Engine

Quantity One(1) Make/Type Caterpillar, Model D-379, 4V-8, Turbo-

charged w/ closed cooling system Maximum output 400 KW Automatic starting Yes/no: Yes Starting methods (air, hydraulic, battery) Automatically start upon loss of Normal

Power Max. angle of operation degrees:

C.2.2 AC-Generator

Quantity One(1) Make/Type Kato, Model 400-683361111, Type

19764 Maximum output 400 KW

Output Capable of back-feeding power to main bus Yes/no: Yes

D. DRILLSTRING EQUIPMENT

D.1 TUBULARS N/A

D.1.1 Kellies

Quantity Nominal size OD Shape type (hexagonal, square or triangular) Total/working length Connection type

Quantity Nominal size OD Shape type (hexagonal, square or triangular) Total/working length Connection type

D.1.2 Kelly Saver Subs N/A

Quantity Nominal kelly size Connection type Protector Yes/no:

D.1.3 Drill Pipe

Drill pipe OD Grade Total length Range W eight Internally plastic coated Yes/no:


16/61

Teras Titanium

Page 16 of 61 ised: 30/05/15

Tool joint OD/ ID Tool joint pin length (original) Tapered shoulder tool joints (box/pins) degree: Connection type Type of hardfacing API Classification Thread protectors Yes/no:

Drill pipe OD Grade

Total length Range W eight Internally plastic coated Yes/no: Tool joint OD/ ID Tool joint pin length (original) Tapered shoulder tool joints (box/pins) degree: Connection type Type of hardfacing API Classification Thread protectors Yes/no:

Type of hardfacing API Classification Thread protectors Yes/no: Drill pipe OD Grade Total length Range Weight Internally plastic coated Yes/no: Tool joint OD/ ID Tool joint pin length (original) Tapered shoulder tool joints (box/pins) degree: Connection type Type of hardfacing API Classification Thread protectors Yes/no:

D.1.4 Drill Pipe Pup Joints

Tool joint OD/ID Grade Length

Length

Length

Weight Connection type Internally plastic coated Yes/no: API classification

Thread protectors Yes/no:

Tool joint OD/ID Grade Length

Length

Length

Weight Connection type Internally plastic coated Yes/no: API classification Thread protectors Yes/no:

Tool joint OD/ID


17/61

Teras Titanium

Page 17 of 61 ised: 30/05/15

Grade Length

Length

W eight Connection type Internally plastic coated Yes/no: API classification Thread protectors Yes/no:

D.1.5 Drill Pipe Casing Protectors

Initial stock Make/Type OD Installation tools (manual/hydraulic/none)

Initial stock Make/Type OD Installation tools (manual/hydraulic/none)

D.1.6 Hevi-Water Drill Pipe Quantity Nominal size OD Weight Range Tool joint OD Tool joint ID Type of hardfacing Internally plastic coated Yes/no: Connection type Thread protectors Yes/no:

Quantity Nominal size OD W eight Range Tool joint OD Tool joint ID Type of hardfacing Internally plastic coated Yes/no: Connection type Thread protectors Yes/no:

D.1.7 Drill Collars

Quantity OD body ID body Average Length of each joint

Drill collar body (slick/spiral) Recess for "zip" elevator Yes/no: Recess for slips Yes/no: Stress relief pin groove Yes/no: Boreback on box Yes/no: Connection type

Quantity OD body ID body Average Length of each joint

Drill collar body (slick/spiral) Recess for "zip" elevator Yes/no: Recess for slips Yes/no: Stress relief pin groove Yes/no: Boreback on box Yes/no: Connection type


18/61

Teras Titanium

Page 18 of 61 ised: 30/05/15

Quantity OD body ID body Average Length of each joint Drill collar body (slick/spiral) Recess for "zip" elevator Yes/no: Recess for slips Yes/no: Stress relief pin groove Yes/no: Boreback on box Yes/no: Connection type

Quantity OD body ID body Average Length of each joint Drill collar body (slick/spiral) Recess for "zip" elevator Yes/no: Recess for slips Yes/no: Stress relief pin groove Yes/no: Boreback on box Yes/no: Connection type

D.1.8 Short Drill Collars N/A

Quantity OD body ID body Nominal length of each joint Stress relief pin groove Yes/no: Boreback on box Yes/no: Connection type

Quantity OD body ID body Nominal length of each joint Stress relief pin groove Yes/no: Boreback on box Yes/no: Connection type Quantity OD body ID body Nominal length of each joint Stress relief pin groove Yes/no: Boreback on box Yes/no: Connection type

Quantity OD body ID body Nominal length of each joint Stress relief pin groove Yes/no: Boreback on box Yes/no: Connection type

D.1.9 Non-Magnetic Drill Collars N/A

Quantity OD body ID body Nominal length of each joint Drill collar body (slick/spiral) Recess for "zip" elevator Yes/no: Recess for slips Yes/no: Stress relief pin groove Yes/no: Boreback on box Yes/no: Connection type

D.1.10 Core Barrels N/A

Quantity Make Model


19/61

Teras Titanium

Page 19 of 61 ised: 30/05/15

Size OD x ID Length Top connection Type Spiral stabilizing ribs Yes/no: Subs and handling tools Yes/no:

D.1.11 Stabilizers N/A

Hole size Quantity Make OD blades Type blades

Type of blade hardfacing OD body or fishing neck ID body Connection type Float valve receptacle Yes/no:

Hole size Quantity Make OD blades Type blades Type of blade hardfacing OD body or fishing neck ID body Connection type Float valve receptacle Yes/no:


Type of blade hardfacing OD body or fishing neck ID body Connection type Float valve receptacle Yes/no:


Type of blade hardfacing OD body or fishing neck ID body Connection type Float valve receptacle Yes/no: D.1.12 Roller Reamers N/A

Hole size Quantity Make/Type OD body ID body OD fishing neck Cutters supplied sets

Connection type

Hole size Quantity

Make/Type OD body ID body OD fishing neck Cutters supplied sets


20/61

Teras Titanium

Page 20 of 61 ised: 30/05/15

Connection type

Hole size Quantity Make/Type OD body ID body OD fishing neck Cutters supplied sets

Connection type

D.1.13 Shock Absorbers N/A

Quantity Make/Type OD body ID body OD fishing neck Connection type

Quantity Make/Type OD body ID body OD fishing neck Connection type

D.1.14 Drilling Jars N/A

Quantity

Make Type (mechanical/hydraulic) up/down OD body Min. ID body OD fishing neck Stroke Connection type

Quantity Make Type (mechanical/hydraulic) up/down OD body Min. ID body OD fishing neck Stroke Connection type

Quantity Make Type (mechanical/hydraulic) up/down OD body Min. ID body OD fishing neck Stroke Connection type

D.1.15 Inside BOP Valve N/A

Quantity Make Size Min. drill pipe ID required Connections (type) Connections OD Working Pressure Quantity Make OD Min. ID


21/61


22/61

Teras Titanium

Page 22 of 61 ised: 30/05/15

Size

Connection type

Quantity Make Size

Connection type

D.1.21 Plug Type Testers N/A

Quantity Make Size test plugs Connection type



D.1.22 Drop-In Valves N/A

Quantity For nom. OD drillpipe Make/Type Max. OD of dart.

Quantity For nom. OD drillpipe Make/Type Max. OD of dart. Quantity For nom. OD drillpipe Make/Type Max. OD of dart.

D.1.23 Near-Bit Subs (Box-Box)

Quantity OD size ID size Top connection

Bottom connection Bored for float valve Yes/no: Float size

Quantity OD size ID size Top connection Bottom connection Bored for float valve Yes/no: Float size


Quantity OD size


23/61

Teras Titanium

Page 23 of 61 ised: 30/05/15

ID size Top connection Bottom connection Bored for float valve Yes/no: Float size


D.1.24 Crossover Subs

Quantity OD size (max/min) ID size Top connection size

Bottom connection size













Quantity OD size (max/min) ID size


24/61

Teras Titanium

Page 24 of 61 ised: 30/05/15

Top connection size






Quantity OD size (max/min) ID size Top connection size Bottom connection size



D.1.25 Drilling Bumper Subs N/A

Quantity Make OD Stroke Connection type




D.1.26 Hole Openers N/A

Quantity Make Size Connection type

Quantity Make Size Connection type


25/61

Teras Titanium

Page 25 of 61 ised: 30/05/15

D.1.27 Underreamer N/A

Quantity Make/Type OD min/OD max Connection type

Quantity Make/Type OD min/OD max Connection type D.2 HANDLING TOOLS

D.2.1 Drill Pipe Elevators

Size 3-1/2" Quantity One(2) Make VARCO BJ Model GG Rated capacity 250 TON

Size 5" Quantity Two(1) Make

VARCO BJ

Model GG-31068 Rated capacity

Size Quantity Make Model Rated capacity

Size 5-1/2'' Quantity One (1) Make VARCO Model GG-31068 Rated capacity 350 TON

D.2.2 Drill Collar Elevators

Size 4-3/4'' Quantity 1 Make VARCO Model W TM Rated capacity 225 TON




D.2.3 Tubing Elevators

Size

2-7/8" to 2-3/8" Quantity One(1)

Make BJ Model HYT Rated capacity 150 T


26/61

Teras Titanium

Page 26 of 61 ised: 30/05/15

D.2.4 Drill Pipe Hand Slips

Size 5" Quantity Two(2) Make/Type VARCO SDXL

Size 5'' DP Quantity 2 Make/Type VARCO SDXL

Size 3-1/2'' DP Quantity 2 Make/Type VARCO SDXL

D.2.5 Casing Slips

Size 7" Quantity One (1)

VARCO

Size 9- 5/8” Quantity One (1) Make/Type VARCO

Size 13-5/8''Quantity One 01 Make/Type VARCO

Size range 18-5/8" Quantity One(1) Make/Type VARCO BJ DCS-S-L

D.2.6 Drill Collar Slips

Size range 7-1/4" Quantity One(1) Make/Type VARCO



D.2.7 Drill Collar Safety Clamps

Quantity Two(2) Range Varco Type MP-R ranging 2-7/8" to 9-1/2"

D.2.8 Tubing Slips N/A

Size Quantity Make/Type

D.2.9 Tubing Spider N/A

Slip size (max/min) Quantity Make Adaptor plate

D.2.10 Drill Collar Lifting Subs

Quantity 1 For OD DC 9'' Connection type 7-5/8'' REG Quantity 5 For OD DC 8'' Connection type 6-5/8'' REG


27/61

Teras Titanium

Page 27 of 61 ised: 30/05/15

Quantity 8 For OD DC 6-1/2'' Connection type 4-1/2'' IF

Quantity 3 For OD DC 4-3/4'' Connection type 3-1/2'' IF

D.2.11 DC Lifting Plugs N/A

Quantity For OD DC Connection type



Quantity For OD DC Connection type D.2.12 Bit Breakers

Quantity One(1) For bit size 6"

Quantity One(1) For bit size 6-1/2"




D.2.13 Elevator Links

Quantity of sets One set Make/Type Size Length 144" Rated capacity 350 Ton



D.2.14 Kelly Spinner N/A

Make/Type

D.2.15 Drill pipe Spinner

Make/Type VARCO SSW 30 Size 2-7/8'' TO 8''

D.2.16 Mud Saver Bucket

Make SUB DRILL MS-V3A


28/61

Teras Titanium

Page 28 of 61 ised: 30/05/15

Size 2-3/8''------6-5/8''

Make Size

D.2.17 Hydraulic Makeup/Breakout N/A

Make/Type Maximum line pull

D.2.18 Rotary Rig Tongs

Quantity (sets) 2 Make/Type BJ SDD Range size (max OD/min OD) 4'' TO 9-5/8'' Torque rating 100,000 FT-- LB

D.2.19 Tubing Tongs (manual) N/A

Quantity (sets) Make/type Size range (max OD/min OD) Torque rating

Quantity (sets) Make/type Size range (max OD/min OD) Torque rating

D.2.20 Tubing Tongs (power) N/A

Quantity Make/type Size range (max OD/min OD) Max output torque Torque indicator Back-up arm

D.2.21 Iron Roughneck

Make/type Varco -TW -60 Size range (max OD/min OD) 4'' TO 8-1/2''

Max. makeup torque 63,000 FT LBS Max. breakout torque 75,000 FT LBS

D.3 FISHING EQUIPMENT

D.3.1 Overshots NA

Quantity Make/Type Overshot OD To catch size To catch size To catch size Overshot guide OD Extension sub length Lipped guide (oversize, regular) Grapples (spiral, basket, both) Pack offs Yes/no: Top sub connection type

Quantity Make/Type Overshot OD To catch size To catch size To catch size Overshot guide OD Extension sub length Lipped guide (oversize, regular) Grapples (spiral, basket, both)


29/61

Teras Titanium

Page 29 of 61 ised: 30/05/15

Pack offs Yes/no: Top sub connection type

D.3.2 Hydraulic Fishing Jar N/A

Quantity Make/Type OD body Min. ID Stroke Connection type Repair kit Yes/no:

Quantity Make/Type OD body Min. ID Stroke Connection type Repair kit Yes/no:

Quantity Make/Type OD body Min. ID

Stroke Connection type Repair kit Yes/no:

D.3.3 Jar Intensifier N/A

Quantity Make Type OD body Min. ID Connection type Repair Kit Yes/no:

Quantity Make Type OD body Min. ID Connection type Repair Kit Yes/no:

D.3.4 Surface Jar N/A

Quantity Make/Type OD body Stroke Connection type Repair Kit Yes/no:

D.3.5 Fishing Bumper Subs N/A

Quantity Make/Type OD body Min. ID Stroke Connection type

Quantity Make/Type OD body Min. ID Stroke Connection type


30/61

Teras Titanium

Page 30 of 61 ised: 30/05/15

D.3.6 Safety Joints N/A

Quantity Make/Type OD body Min. ID Connection type

Quantity Make/Type OD body Min. ID Connection type

D.3.7 Junk Baskets (Reverse Circulation) RCJB N/A

Quantity Make/Type For hole size OD body Connection type Inside magnet available Yes/no: Mill shoes type (A, B, C) Yes/no:



D.3.8 Junk Subs N/A

Quantity Make/Type For hole size OD body Connections type



D.3.9 Flat Bottom Junk Mill N/A

Quantity Make/Type OD flat mill Connection type

Quantity Make/Type OD flat mill Connection type

Quantity Make/Type


31/61

Teras Titanium

Page 31 of 61 ised: 30/05/15

OD flat mill Connection type

D.3.10 Magnet Fishing Tools

Quantity Make/Type OD body Connection type

Quantity Make/Type OD body Connection type

D.3.11 Taper Taps N/A

Quantity Make Tap OD (max/min) OD body Length overall Connection type

Quantity Make Tap OD (max/min) OD body Length overall Connection type

D.3.12 Die Collars N/A

Quantity Make Minimum OD Maximum OD OD body Length Connection type Quantity Make Minimum OD Maximum OD OD body Length Connection type

E. WELL CONTROL

E.1 DIVERTER NA

Fixed

Annular

Bottom Connection

E.1.1 DIVERTER FLOW LINES

Quantity Three (3) , One Flow line and TwoOverboard line

Nominal size of flow lines 12" Running from diverter to

Valve make/type Hydraulic Trunnion ball valve ANSI 900


32/61

Teras Titanium

Page 32 of 61 ised: 30/05/15

Valve make/type

System pressure rating 2000 psi Flex hose in flow line

E.2 LOW PRESSURE BLOWOUT N/A PREVENTERS (21- 1/4”)

All appropriate components H2S rated Yes/no:

E.2.1 Ram Type Preventers

Quantity NAMake/model Type (single/double/triple) Size Working Pressure Ram locks Yes/no: Type (manual/hydraulic) HS2 service Side outlets

Bottom connection Top connection Shear ram boosters

Quantity NA Make/model Type (single/double/triple) Size Working Pressure Ram locks Yes/no: Type (manual/hydraulic) HS2 service Side outlets

Bottom connection Top connection Shear ram boosters

E.2.2 Available Rams (installed & spare)

Quantity/type/size NA Quantity/type/size NA Quantity/type/size NA Quantity/type/size NA Quantity/type/size NA Quantity/type/size Quantity/type/size

E.2.3 BOP Ram Configuration (normal) N/A

Upper Middle Upper Middle Lower Lower

E.2.4 Annular Preventer

Quantity N/A Make/Type Size Working pressure Bottom connection

Top connection


33/61

Teras Titanium

Page 33 of 61 ised: 30/05/15

E.2.5 Kill Line Valves N/A

Quantity Make/Type Size Working pressure Gasket type Hydraulic/manual/non-return



E.2.6 Choke Line Valves N/A

Quantity Make/type Size Working pressure Gasket type Hydraulic/manual


E.3 High Pressure Blowout (13- 5/8” 10,000 PSI) All appropriate components H2S rated Yes/no: Yes

E.3.1 Ram Type Preventers

Quantity 1 Make/model Cameron Type U Type (single/double/triple) Single Size 13-5/8'' Working pressure 10,000 psi Ram locks Yes/no: Yes Type (manual/hydraulic) Hyd H2S service Yes/no: Yes Side Outlets 2 Size 4-1/16'' WP 10,000 psi Bottom connection 13-5/8'' 10,000 psi Flanged BX-159 Shear ram boosters Yes/no: Yes

Quantity 1 Make/model Cameron Type U Type (single/double/triple) Double Size 13-5/8'' Working pressure 10,000 psi Ram locks Yes/no: Yes Type (manual/hydraulic) Hyd H2S service Yes/no: Yes Side Outlets

4 Size 4-1/16''

WP 10,000 psi Bottom connection 13-5/8'' 10,000 psi Flanged BX-159 Shear ram boosters Yes/no: Yes


34/61

Teras Titanium

Page 34 of 61 ised: 30/05/15

E.3.2 Available Rams (installed & spare)

Quantity/type/size 3 sets / Drill pipe Rams / 5'' Quantity/type/size 1 set / Variable Rams / 4-1/2'' To 7'' Quantity/type/size 1 set / Variable Rams / 3-1/2'' To 5'' Quantity/type/size 1 set Blind Shear Quantity/type/size 1 set 2-7/8'' x 5'' Quantity/type/size Quantity/type/size

Casing Rams13- 5/8” 01 Set9-5/8” 01 Set 7” 01 Set

E.3.3 BOP Ram Configuration (normal)

Upper 4- 1/2” ' x 7'' Upper Middle N/A Middle Blind Shear Middle Lower N/A Lower 5''

E.3.4 Annual Preventer

Quantity 1 Make/type Hydril Type GK Size 13-5/8'' Working pressure 5000 PSI Bottom connection 13-5/8'' 5000 PSI Studded BX - 160 Top connection 13-5/8'' 10000 PSI Glanded BX - 159

E.3.5 Kill Line Valves

Quantity 2 Make/type Cameron / Type F Gate valve Size 2-1/16'' Working pressure 10,000 psi Gasket type Hydraulic/manual/non-return SR # GY6F7069 / 100304

E.3.6 Choke Line Valves

Quantity 1 Make/type Cameron / Type F Gate valve Size 4-1/16'' Working pressure 10,000 psi Gasket type N/A Hydraulic/manual Manual SR # 3004011-1-8367

Quantity 1 Make/type Cameron / Type FCC Gate valve Size 4-1/16'' Working pressure 10,000 psi Gasket type Hydraulic/manual SR # 8004011-2

E.4.0 OTHER BLOWOUT PREVENTERS N/A

All appropriate components H2S rated Yes/no:

E.4.1 Ram Type Preventers N/A

Quantity Make/model Type (single/double/triple)

Size Working pressure Ram locks Yes/no: Type (manual/hydraulic) H2S service Yes/no: Side outlets


35/61

Teras Titanium

Page 35 of 61 ised: 30/05/15

Bottom connection Top connection Shear ram boosters Yes/no:

Quantity Make/model Type (single/double/triple) Size Working pressure Ram locks Yes/no: Type (manual/hydraulic) H2S service Yes/no: Side outlets

Bottom connection Top connection Shear ram boosters Yes/no:

E.4.2 Available Rams (installed & spare) N/A

Quantity/type/size Quantity/type/size Quantity/type/size

Quantity/type/size Quantity/type/size Quantity/type/size Quantity/type/size Quantity/type/size Quantity/type/size Quantity/type/size

E.4.3 BOP Ram Configuration (normal) N/A

Upper Upper Middle Middle Middle Lower Lower E.4.4 Annular Preventer N/A

Quantity Make/type Size Working pressure Bottom connection Top connection

E.4.5 Kill Line Valves N/A

Quantity Make/type Size Working pressure Gasket type Hydraulic/manual/non-return

Quantity Make/type Size Working pressure Gasket type Hydraulic/manual/non-return

Quantity Make/type Size

Working pressure Gasket type Hydraulic/manual/non-return


36/61

Teras Titanium

Page 36 of 61 ised: 30/05/15

E.4.6 Choke Line Valves N/A



E.5 BOP CONTROL SYSTEM

E.5.1 Accumulator Unit

Make/model Koomey, Model T 20180-35, Type 80 SR # 12458Location Fluid reservoir capacity U.S. gal 280 USG Oil/water mix. rate Glycol reservoir capacity Total accumulator capacity (w/o precharge) U.S. gal System working pressure 3,000 psi Control manifold model Koomey, Model SU2KB55 "S" SeriesSR # GU2KB6SRegulator type Total useful accumulator volume Total nominal bottles capacity U.S. gal 11 USG per Bottle , Total 18 Bottles Bottle working pressure

Yes/no: Plus percent additional volume

E.5.2 Accumulator Hydraulic Pumps

Electric Driven Triplex Model 20-315-20-3 with 20 hp motor

Air Driven Three (3) Koomey Model 25A Air Pump

E.5.3 Primary Control Panel

Control panel make/model

Location Rig Floor Panel controls for the following functions: Annular Yes/no: Rams Top Yes/no: Blind / Shear Yes/no: Rams Bottom Yes/no: Choke Line HCR Yes/no: Kill line HCR Yes/no: Jacks or spare HCR Yes/no: Diverter System Yes/no:

Yes/no: Yes/no: Yes/no:

Yes/no:

E.5.4 Remote Control Panels

Make/model One (1) Koomey , Model Arc-5 AuxiliaryAir Remote Control Panel

Location Rig Floor


37/61

Teras Titanium

Page 37 of 61 ised: 30/05/15

Location Port side Main Deck Location Ability to operate main closing unit

Yes/no: Yes System routing (direct or through panel) Remote control of - system pressure Yes/no: Yes

Remote control of - annular pressure Yes/no: Yes

E.6 CHOKE MANIFOLD Yes

All appropriate components H2S rated Yes/no

E.6.1 Choke Manifold

Nominal size Size 2-1/ 16” Minimum ID Maximum W P 15,000 psi Quantity of fixed chokes 1 Cameron Quantity of adjustable chokes 02no Quantity of power chokes 01noPower choke remote control panel Yes/no: Glycol injection Yes/no:

E.7 FLEXIBLE CHOKE & KILL LINES

Quantity 1 Make/Type Flexible Choke Line ID 3-1/16'' Working pressure 15,000 psi H2S service Yes/no: Yes

Quantity 1 Make/Type Flexible Kill Line ID 3-1/16'' Working pressure 15,000 psi H2S service Yes/no: Yes

E.8 FLEXIBLE BOP CONTROL HOSES Quantity One (2) Make/Type Fleximak ID 1- 1/2” Working pressure 5000 psi Fire resistant Yes/no: Yes

Quantity 12 Make/Type Phoenix Beattie / Fireshield 5000 hose ID 1'' Working pressure 5000 psi Fire resistant Yes/no: Yes

E.9 BOP TESTING EQUIPMENT N/A

E.9.1 Hydraulic BOP Test Pump

Make/model Kerr Test Pump, Model KB3500 Type Plunger Pump Pressure rating 10,000 psi Chart recorder Yes/no: Yes

E.9.2 BOP Test Stump

Size 13- 5/8'' Size Size

E.10 BOP HANDLING E.10.1 BOP Hoist System

Make/type JD Neuhaus Quantity of hoists 2


38/61

Teras Titanium

Page 38 of 61 ised: 30/05/15

Number of lift points on BOP 2 System safe working load (max BOP wt) 37.5 Ton

E.10.2 Work Platforms YES

BOP work platform (adjustable/fixed/none) Conductor pipe platform Yes/no:

E.10.3 Conductor Pipe Tensioning System N/A

Make/type Tension capacity number of lift points Stroke

F. MUD SYSTEM/BULK SYSTEM

F.1 HIGH PRESSURE MUD SYSTEM

System working pressure 5000 psi System test pressure 5000 psi

F.1.1 Mud Pumps

Quantity Three (3) Make National Model 12-P-160 w/ High Pressure Fluid ends Type (Triplex/Duplex) Triplex Mud pump drive motors/pump Two (2) GE 752 Shunt wound Motor

SR # 7502931, 7490982, 7491357,7533591, 7502902 & A-S10243.

Fluid end type Pump stroke counter type Proximity SwitchSupercharging pump type Mission Magnum 6" x 8" x 14", 50 hp

TEFC motor, 1200 rpm SR # M40782, M67196

Discharge/suction line ID 5'' / 10'' Mud Pump pulsation dampener type Hydril K20- 5000, Model 100 with 5,000 psi W

P

Reset relief valve Retsco / 32400/ m2 2000--7500 psi Working flowrate per pump at 90% of max spm 5" liners @ 0.0656 bbls 7.08 BPM 5-1/2" liners @ 0.0793 bbls 8.56 BPM 6" liners @ 0.0944 bbls 10.20 BPM 6-1/2" liners @ 0.1108 bbls 11.90 BPM 7" liners @ 0.1285 bbls 13.90 BPM Quantity Make Model Type (Triplex/Duplex) Mud pump drive motors/pump Fluid end type Pump stroke counter type Supercharging pump type Discharge/suction line ID Mud Pump pulsation dampener type Reset relief valve Working flowrate per pump at 90% of max spm

F.1.2 Transfer Pumps/Mixing Pumps 1.4.6.3

Mixing Pumps Two (2) Mission Magnum, Size 6" x 8" x 14"

Driven by 480 VAC, 1100 rpm, 3 phase and 75 hpTEFC motor GPM up to 3000


39/61

Teras Titanium

Page 39 of 61 ised: 30/05/15

Transfer Pumps Two (2) ,,SR #Mission Magnum, Size 6" x 8"

Driven by : One (1) - 75 hp, 1750 rpm TEFC motorOne (1) - 100 hp 1200 rpm motor

F.1.3 Booster Pump

Quantity 3 Make/type Mission Magnum 6'' X 8'' X 12 Capacity (each) 480 VAC, 50 HP Driven motor type AC Drill Water Pump = 02no & Fire Pump = 01no

F.1.4 Standpipe Manifold

Quantity of standpipes 2 Standpipe/ID H-Type standpipe manifold Yes/no: Yes Kill line outlet Yes/no: Yes Fill-up line outlet Yes/no: Yes Bleed-off line outlet Yes/no: Yes

F.1.5 Rotary Hoses

Quantity 2 Make/Type Copper state Class D ID x length 3-1/2'' X 75 FT. Working pressure 7500 PSI Snubbing lines Yes/no: Yes

Quantity Make/Type ID x length Working pressure Snubbing lines Yes/no:

F.1.6 Cementing Hose

Quantity 1 Type (armor sheath/flexible steel pipe) FLEXIBLE Length 65 FT ID 5'' Working pressure 150 psi

Quantity Type (armor sheath/flexible steel pipe) Length ID Working pressure

F.1.7 High Pressure Flexible Steel Pipe N/A

Make/type Integral connections/fittings (non-threaded) Yes/no: ID Working pressure Section length

Section length

Sweep swivels, make/type

Suitable for H2S service

F.2 LOW PRESSURE MUD SYSTEM

F.2.1 Mud Processing Tank

Sand trap tank, usable volume 176 bbls Degasser tank, usable volume 72 bbls Yes/no: NO

Desander tank, usable volume 72 bbls Yes/no: NO

Desilter tank, usable volume 72 bbls


40/61

Teras Titanium

Page 40 of 61 ised: 30/05/15

Yes/no: No Mud cleaner tank, usable volume 72 bbls

Yes/no: No Centrifuge tank, usable volume 72 bbls

Yes/no: No Other tank, usable volume

Yes/no: Total usable capacity 176 bbls

F.2.2 Mud Tanks

Quantity Three (3) Total capacity (usable) 1403.5 bbls Usable capacity No. 1 425.5 bbls

Height 10 ft Mixer Yes/no: Yes Mud guns Yes/no: No Usable capacity No. 2 489 bbls

Height 10 ft Mixer Yes/no: Yes Mud guns Yes/no: NO Usable capacity No. 3 489 bbls

F.2.3 Pill/Slug Tank

Capacity (usable) 63.5 bbls Mud agitator Yes/no: No Mud guns Yes/no: No

Capacity (usable) Mud agitator Yes/no: Mud guns Yes/no:

F.2.4 Trip/Stripping Tanks

Capacity (usable) 40 bbls Capacity/foot Level indicator Yes/no: Yes Electric pump make Hallco 2500 Supreme

Facility for casing fill-up Yes/no: Yes Alarm and strip chart recorder Yes/no: No

F.2.5 Chemical Mixing Tank

Capacity (Usable) Chemical mixer type

F.2.6 Shale Shakers

Primary Three (3) Derrick GPM up to 3400 Noise level : 75 DB @ 3 meters / 80 DB@ 1 meter

Driven by : Eight (8) Martin Engineering 70 CDX 18-8340-VM, TENV Class 1, Group C & D, Threephase induction motor

F.2.7 Desander

Quantity One (1) Make/Model Derrick, Model 1-HI-G Type Derrick, Nominal flow rate Number of cones Three (3) 10" Cones


41/61

Teras Titanium

Page 41 of 61 ised: 30/05/15

Feed pump make/model Mission Magnum 6" x 8" x 14" w/ 100 hpmotor

Is pump dedicated to desander Yes/no: Yes

F.2.8 Desilter

Quantity One (1) Make/model Derrick Type Derrick Nominal flow rate N/A Number of cones Twenty (20) 4" Cones

Feed pump make/model Mission Magnum 6" x 8" x 14" w/ 100 hpmotor

Is pump dedicated to desilter

F.2.9 Mud Cleaner

Quantity 1 Make/model Derrick Type Nominal flow rate 1000 GPM Number of cones N/A

Feed pump make/model

F.2.10 Mud/Gas Separator (Poor Boy)

Make/Type Velath Engineering Work Dimensions (height x OD) 45 ft Gas discharge line ID 6'' Gas discharge location, primary Top of Derrick Can discharge be tied into burner system Yes/no: N/A Vacuum breaker Yes/no: No Mud seal height N/A Pressured gauge Yes/no: Yes Calculated gas throughput N/A

F.2.11 Degasser Make/Type Derrick Vacu - Flo, Model 10310-00 Nominal flow rate N/A Feed pump make/model Yes/no: N/A

F.2.12 Mud Agitators

Quantity Three (3) Make/Model Derrick KF97 AM256 Driven by motor of power 15 hp / 480 Volts Located in tanks Bottom Port on each tank

Quantity

Three (3)Make/Model GN Solids Control / GNJBQ150AMotor of power 20HP (15kw)Impeller Speed 60/72 rpm

F.2.13 Mud Centrifuge N/A

Quantity Make/Model Feed pump make Is feed pump dedicated to centrifuge (s) Yes/no:

F.2.13 Mud Laboratory and Facilities

Separate room Yes/no: Yes

Equipped with Elect. Phone. Water Air conditioning Yes/no: Yes Positive pressure Yes/no: Yes


42/61

Teras Titanium

Page 42 of 61 ised: 30/05/15

F.3 BULK SYSTEM

F.3.1 Barite/Bentonite Silos

Quantity 4 Tanks Capacity of each silo 1268 cu. Ft Locations Port Side Type weight loadcell N/A Pressure rating 42 PSI Relief valve(s) installed Yes/no: Yes

F.3.2 Cement Silos

Quantity 4 Tanks Capacity of each silo 1268 cu. Ft Locations STB Side Type weight loadcell N/A Pressure rating 42 PSI Relief valve(s) installed Yes/no: Yes

F.3.3 Surge Tank for Barite/Bentonite N/A

Quantity Capacity of each tank Type weight loadcell Pressure rating Relief valve(s) installed Yes/no:

F.3.4 Mud Hopper

Quantity Three (3) Make/model One (1) Crester located in Chemical room and

Two (2) 6 ft Mission High Shear Venturi

Feed pump make/model Is feed pump dedicated to mud hopper(s) Yes/no:

F.3.5 Surge Tank for Cement N/A

Quantity Capacity of each tank Type weight loadcell

Pressure rating Relief valve(s) installed Yes/no:

F.3.6 Bulk Transfer System Port Take on lines

Independent air system for the silos and surge Rig air

Yes/no: Yes Air reduced from main air supply through Yes/no:

Separate volume tank and drier Yes/no: Yes

G. CASING/CEMENTING EQUIPMENT N/A

G.1 CASING EQUIPMENT N/A

G.1.1 Drive Hammer N/A

Make/type Maximum casing/conductor OD

G.1.2 API Casing Drifts N/A

For Casing OD, weight, quantity For Casing OD, weight, quantity For Casing OD, weight, quantity For Casing OD, weight, quantity For Casing OD, weight, quantity For Casing OD, weight, quantity


43/61

Teras Titanium

Page 43 of 61 ised: 30/05/15

G.1.3 Clamp-On Type Casing Protectors N/A

For casing OD, quantity For casing OD, quantity For casing OD, quantity For casing OD, quantity For casing OD, quantity For casing OD, quantity

G.1.4 Side Door Casing Elevator

Quantity For OD casing Make/Type Capacity



G.1.5 Single Joint Elevators

Quantity 2 For OD casing 5’’ Make/Type Varco

Quantity For OD casing Make/Type

Quantity For OD casing Make/Type Quantity For OD casing Make/Type



G.1.6 Slip Type Elevator/Spiders

Quantity Three (3) Make/Type Varco Pneumatic/manual Manual Capacity 350 Ton Slips for OD casing sizes 13-3/8 ”

Quantity Make/Type Pneumatic/manual Capacity

Slips for OD casing sizes

Quantity Make/Type Pneumatic/manual Capacity Slips for OD casing sizes


44/61

Teras Titanium

Page 44 of 61 ised: 30/05/15

G.1.7 Casing Slips

Quantity Make/Type For OD casing




G.1.8 Casing Bowls

Quantity Make/Type For OD casing (max/min)



G.1.9 Manual Casing Tongs

Quantity (sets) Make/Type W /jaws for OD casing (max/min)



G.1.10 Power Casing Tongs

Quantity Make/Type W /jaws for OD casing (maximum/minimum)

Max output torque Torque indicator Yes/no: Back-up arm Yes/no: Quantity Make/Type W /jaws for OD casing (maximum/minimum) Max output torque Torque indicator Yes/no: Back-up arm Yes/no:

G.1.11 Power Unit For Casing & Tubing Tongs N/A

Quantity Make/type Capacity (ea) Output pressure

Dedicated unit Yes/no:

G.1.12 Casing Circulating Head (Swedge) N/A

For OD casing Type of connection


45/61

Teras Titanium

Page 45 of 61 ised: 30/05/15






G.1.13 Casing Spears (International) N/A

Quantity Make/Type For OD casing For casing weight Pack-off Yes/no:

Quantity Make/Type For OD casing For casing weight

Pack-off Yes/no:

Quantity Make/Type For OD casing For casing weight Pack-off Yes/no:

G.1.14 Casing Cutters (Internal) N/A




G.1.15 Crossover to Handle Casing with N/A

Quantity For OD casing Casing connection type Drill pipe connection type Rated capacity




46/61

Teras Titanium

Page 46 of 61 ised: 30/05/15

G.1.16 Casing Scrapers N/A

Quantity Make For OD casing For casing weight OD body Connection type Blade type (roller/fixed)

Quantity Make For OD casing For casing weight OD body Connection type Blade type (roller/fixed)

Quantity Make For OD casing For casing weight OD body Connection type Blade type (roller/fixed) Quantity Make For OD casing For casing weight OD body Connection type Blade type (roller/fixed)

G.2 CEMENTING EQUIPMENT

G.2.1 Cement Unit NA

Owner Free placement basis Yes/no: Make/Type No. of triplex pumps Maximum working pressure Maximum flowrate (total) Unit powered by (electric or diesel) Recirculating mixing system Yes/no:

Liquid additive system Yes/no: Premix/batch tank Yes/no:

Pressure recorder Yes/no: Desionmeter recording device Yes/no:

G.2.2 Cementing Manifold N/A

Discharge manifold working pressure Cement pump discharge lines min. ID Cement pump disc. Lines working pressure Manifold safety pressure relief valve Yes/no:

G.2.3 Cementing Standpipe

Quantity 1 Working pressure 5000 PSI ID Connection to choke manifold Yes/no: Yes Connection to standpipe manifold

Yes/no:

Yes

G.2.4 Cementing Kelly N/A

Quantity Nominal size OD Total length


47/61

Teras Titanium

Page 47 of 61 ised: 30/05/15

Working length Connection type Cement head Yes/no:

G.2.5 Cementing Tubing N/A

Size Length X-overs to drillpipe specified in Section D.1.3.

H. INSTRUMENTATION/COMMUNICATION N/A

H.1 DRILLING INSTRUMENTATION AT DRILLER ’S POSIT ION N/A

H.1.1 Weight Indicator

Make/Type Martin Decker/Analog Sensor type Pancake

H.1.2 Standpipe Pressure Gauges

Quantity One(1) Make/Type Martin Decker/Analog Maximum Pressure reading 5000psi

Quantity One(1) Make/Type MD TOTCO Maximum Pressure reading 5000

H.1.3 Choke Manifold Pressure Gauge

Quantity Two(2) Make/Type Martin Decker Maximum pressure reading 10K

Quantity One(1) Make/Type Durant/Digital Maximum pressure reading 10,000psi

H.1.4 Rotary Instrumentation H.1.4.1 Tachometer

Make/type Maximum RPM

H.1.4.2 Torque Indicator

Make/Type Maximum torque

H.1.5 Top Drive Instrumentation

H.1.5.1 Tachometer

Make/type NOV Analog Maximum RPM 350RPM

H.1.5.2 Torque Indicator

Make/Type NOV Analog Maximum torque 51(FT/lbs X 1000)

H.1.6 Pump Stroke Counters

Quantity One(1) Make/Type Durant Digital Stroke indicator and cumulative Durant Digital

Yes/no:

H.1.7 Tong Torque Indicator

Make/Type Varco Maximum torque 16000 ft lbs


48/61

Teras Titanium

Page 48 of 61 ised: 30/05/15

H.1.8 Pit Volume Totalizer

Make/Model MD TOTCO Floats in active mud tanks Yes/no: Yes

Floats in reserve mud tanks Yes/no: Yes

Loss/Gain indicator Yes/no: Yes

H.1.9 Mud Flow Indicator

Make/Model MD TOTCO

High/low alarm Yes/no: Yes Yes/no: Yes

Sensor location Flow Line

H.1.10 Trip Tank Indicator

Make/Model MD TOTCO Chart recorder Yes/no: Yes Alarm Yes/no: Yes

Make/Model Chart recorder Yes/no: Alarm Yes/no:

H.1.11 Automatic Driller (see B.2.1)

Make/Type NOV / Wild Cat Services

H.1.12 Remote Choke Control Unit (see E.5)

H.1.13 Crown Clearance Indicator

Make/type Crown -O-matic

H.2 DRILLING PARAMETER RECORDER

Quantity Three(3) Make/Type MD TOTCO Location – 1 Driller ’s Shack Location – 2 OIM office Location – 3 Co. Man Office

Number of parameters recorded Parameter recorded Stand Pipe Parameter recorded Casing Pressure Parameter recorded Strokes Parameter recorded Trip Tank Parameter recorded Pit Levels Parameter recorded Flow Parameter recorded Total Strokes Parameter recorded Ton miles H.3 INSTRUMENTATION AT CHOKE MANIFOLD

H.3.1 Standpipe Pressure Gauge (Drillpipe pressure gauge)

Quantity Make/Type Pressure range (maximum)

Visible from choke operating position Yes/no:

H.3.2 Choke Manifold Pressure Gauge (Casing pressure gauge)

Quantity Make/Type Pressure range

Visible from choke operating position Yes/no:


49/61

Teras Titanium

Page 49 of 61 ised: 30/05/15

H.4 INSTRUMENTATION AT STANDPIPE

H.4.1 STANDPIPE PRESSURE GAUGE

Quantity Make/Type Pressure range

Visible from driller ’s position Visible from choke operating system

H.5 DEVIATION EQUIPMENT

H.5.1 Deviation Recorder

Quantity Make/Type Deviation range degree/degree:

Quantity Make/Type Deviation range degree/degree:

H.5.2 Slickline Unit (see B.2.4)

H.6 RIG COMMUNICATION SYSTEMS

H.6.1 Rig Telephone System

No. of stations Twenty-three (23) Make/Type Gia-Tronic PA / GA System Explosion proof Yes/no: Yes

H.6.2 Public Address System

Can be combined with H.6.1 above Yes/no: Yes No. of stations Twenty Three(23) Make/Type Gia-Tronic PA / GA System Explosion proof Yes/no: Yes

H.6.3 Drill Floor Talkback System

No. of stations Location Location

H.6.4 Hand-Held VHF Radios

Quantity Six (6) , Icom Quantity intrinsically safe Yes

H.6.5 Crane Communication System

Quantity One Make/type Gaitronics PA/GA System Explosion proof Yes/no: Yes Part of rig telephone system (H.6.1) Yes/no: Yes Part of public address system (H.6.2) Yes/no: Yes

H.7 ENVIRONMENTAL INSTRUMENTATION

H.7.1 Temperature Indicators

Air temperature (make/model)

Recorder Yes/no: No Sea water temperature (make/model) Recorder Yes/no: No

H.7.2 Barometric Pressure Indicators Yes/no:

Make/Model Recorder Yes/no: No


50/61

Teras Titanium

Page 50 of 61 ised: 30/05/15

H.7.3 Humidity Sensing Indicator Yes/no:


H.7.4 Wind Speed/Direction Meter Yes/no:


H.7.5 Wave Profile Recorder Yes/no: N/A

Make/Model Recorder Yes/no:

H.7.6 Current Indicator N/A

Make/model Located at Recorder Yes/no:

H.7.7 Weather Facsimile N/A

Make/model Located at Recorder Yes/no:

H.8 NAVIGATION INSTRUMENTATION

H.8.1 Gyro Compass

Make/model One (1) W EEMS and PLATH Hand heldCompass

Located at

H.8.2 Depth Sounder N/A

Make/model Located at Recorder

H.8.3 Radar N/A

Quantity Make/model Located at Bandwidth

H.9 EXTERNAL COMMUNICATIONS EQUIPMENT

H.9.1 SSB Transceiver

Location(s) Radio Room Quantity 1 Make/Model Sailor, Model CU5100 / TU5250 Power 250w Frequency ranges (low/high) High (Synthesized crystal) Synthesized Facsimile capable (see also H.9.9) Yes/no: No Telex capable (see also H.9.10) Yes/no: Yes

Location(s) Tour Pusher Office Quantity 1 Make/Model Sailor, Model CU5100 / TU5250 Power 250w Frequency ranges (low/high) High (Synthesized crystal) Synthesized Facsimile capable (see also H.9.9) Yes/no: No Telex capable (see also H.9.10) Yes/no: Yes


51/61

Teras Titanium

Page 51 of 61 ised: 30/05/15

H.9.2 E.P.I.R.B’s

Quantity One(1) Make/Model Jotron/ TRON 40S Locations(s) Control Room Deck

Quantity Make/Model Locations(s)

H.9.3 Marine VHF Radio

Quantity Four(4) Make/Model Sailor Model RT5022 / ICOM / IC-M504

Power 25w Channels All Marine Channels Location Radio Room

Quantity One (1) Make/Model Sailor Model RT Power 25w Channels All Marine Channels Location Tour Pusher Office

H.9.4 Aircraft Radio Beacon Transmitter N/A

Quantity Make/Model Power

H.9.5 Aeronautical VHF Transceiver

Quantity Three(3) Make/Model ICOM IC – A110/IC-A3/IC-A6 Power Frequency range (low/high) (Synthesized/crystal) Location(s)

H.9.6 Watch Receiver Sailor DSC W /K Receiver

Quantity Four(4) Make/Model MF/HF-CU5100 / TU5250 VHF RT5022 Frequency MF/HF DSC Freq VHF Ch. 70

H.9.7 Satellite Communication System

Make/Model Inmarsat C Sailor TT-3000E Type Facsimile capable (see also H.9.9) Yes/no: Telex capable (see also H.9.10) Yes/no: Yes Location(s) Radio Room

H.9.8 Cellular

Number of phone lines

H.9.9 Facsimile

Make/model Connected to


H.9.10 Telex




52/61

Teras Titanium

Page 52 of 61 ised: 30/05/15

H.9.11 Scrambler



H.9.12 Other Communication Systems

Make/model F33/KVH TRACPHONE Connected to Radio Room


I. PRODUCTION TEST EQUIPMENT

I.1 BURNERS N/A

Make/type Quantity Capacity Weight Water requirement at 100 psi I.2 BURNER BOOMS N/A

Make/type Quantity Length Horizontal Yes/no: Maximum wind speed Walkway and handrails Yes/no: Burner platform size Burner mounting rotatable Yes/no:

I.3 PIPING ON BURNER BOOMS N/A

I.3.1 Oil Line ID Working pressure Connection type at burner end H2S Yes/no: Pressure gauge connection at barge end

I.3.2 Gas Line N/A

ID Working pressure Extended beyond burner by Connection type at burner end H2S Yes/no: Pressure gauge connection at barge end I.3.3 Water Line N/A

ID Working pressure Connection type at burner end Pressure gauge connection at barge end

I.3.4 Air Line N/A

ID Working pressure Connection type at burner end Pressure gauge connection at barge end

I.3.5 Pilot Gas line N/A

ID Working pressure Connection type at burner end


53/61

Teras Titanium

Page 53 of 61 ised: 30/05/15

Pressure gauge connection at rig end

I.4 SPRINKLER SYSTEM N/A

System in place Pump source Yes/no:

I.5 FIXED PIPING FOR WELL TESTING N/A

I.5.1 Drill floor To Separator Area N/A

Type (threaded/welded/both) Quantity Size ID Working pressure Connection on drill floor Connection at separator Number of valves/lines Size of valves H2S Yes/no:

I.5.2 Separator Area to Burner Booms N/A

Service (oil/gas) Type (threaded/welded/both) Quantity Size ID Working pressure Connection at separator

Connection at boom Number of valves/lines Size of valves H2S Yes/no: Valves installed near separator area for switching gas to either burner Yes/no:

Service (oil/gas) Type (threaded/welded/both)

Quantity Size ID Working pressure Connection at separator Connection at boom Number of valves/lines Size of valves H2S Yes/no: Valves installed near separator area for switching gas to either burner Yes/no:

I.5.3 Water Lines To Burner Booms N/A

Type (threaded/welded/both) Quantity Size ID Working pressure Number of valves required Size of valves Pump source Rated line capacity at 300 psi

I.5.4 Air System To Burners Rooms N/A

Type (threaded/welded/both) Quantity Size ID Working pressure Non-return valves fitted Yes/no: Air source I.5.5 Oil Storage Tank To Overboard N/A

Type (threaded/welded/both) Quantity


54/61

Teras Titanium

Page 54 of 61 ised: 30/05/15

Size ID Working pressure Connection at separator area

I.5.6 Separator To Vent Stack Of Rig N/A

Type (threaded/welded/both) Quantity Size ID Working pressure Connection at separator area

I.6 AUXILIARY POWER AVAILABILITY

I.6.1 For Field Laboratory N/A

Quantity Volts Frequency Breaker

I.6.2 For Crude Transfer Pump N/A


I.6.3 For Electric Heaters N/A


J. WORKOVER TOOLS N/A

K. ACCOMMODATION

K.1 OFFICES K.1.1 Company Representative ’s Office

Quantity One (1) Complete with desk, filing cabinet(s) and Quantity with unrestricted view to drill floor

K.1.2 Contractor Representative ’s Office

Quantity Two (2) Quantity with unrestricted view to drill floor Yes/no:

K.1.3 Control room Yes/no:

Quantity One (1) Includes Radio room, Jacking controland Main Fire and Gas alarm Panel

K.1.4 Radio room

Quantity See K.1.3

K.1.5 Helicopter Ready Room

Quantity

K.1.6 Hospital Room

Number of beds/bunks Five (5) Beds Dangerous drugs locker Yes/no: Yes


55/61

Teras Titanium

Page 55 of 61 ised: 30/05/15

K.2 LIVING QUARTERS

K.2.1 Accommodation for Company ’s personnel

Total beds 110

K.2.3 Mess Seating Capacity

Main mess 49 each

K.2.4 Meeting Rooms

Quantity One (1)

K.2.5 Recreation Rooms Yes

Quantity Recreation facilities

K.2.6 Other Rooms

Change Rooms 1Prayer Rooms 1Cinema 1Other (GYM) 1L. SAFETY EQUIPMENT

L.1 GENERAL SAFETY EQUIPMENT

L.1.1 General Personnel Protective Gear

Safety glasses

Safety hats (contractor/everyone/not supplied) Safety boots (contractor/everyone/not supplied) Safety clothing

Ear protection (contractor/everyone/not supplied) Rubber gloves Rubber aprons

Rubber gloves - elbow length

Fullface visors

Eye shields (for grinders)

Dust masks

Explosion proof hand torches

Safety belts c/w lines

L.1.2 Decontamination Stations

L.1.2.1 Eye Wash Stations

Quantity - fixed Four (4) Make/model Location(s) One each in Rig floor, Mud pits, Chemical room

and Shale shaker

Quantity - fixed Make/model Location(s)

L.1.2.2 Safety Showers

Quantity 05noLocation(s) 02 Mud Pit, 01 Rig Floor, 01 Shaker & 01

S/Room


56/61

Teras Titanium

Page 56 of 61 ised: 30/05/15

L.1.3 Derrick Safety Equipment NA

Derrick safety belts Geronimo line Yes/no:

Derrick safety belts

L.1.4 Derrick Climbing Assistant 01 Set

Make/Type

L.1.5 Fresh Air Blowers (Bug Blowers)

Quantity 12noMake/Type Located at 05 Engine Room, 03 Mud Pump Room, 01

Shale Shaker, 02 Rig Floor & 01 Derrick

L.2 GAS/FIRE/SMOKE DETECTION

L.2.1 H2S Monitoring System

Make/Type Rexnord Series 740 A Gas monitor w/ aModel 226123 Controller w/ Four channel

Sampling points at: Flow line Yes/no: Rig Floor Yes/no: Yes Shale Shakers Yes/no: Yes Mud pit room Yes/no: Yes Mud pump room Yes/no:

Alarms at Alarm set at 5 PPM (Low level) and 10PPM (High level

Yes/no:

Central control panel

Local alarm (audible/visual/both) Both

L.2.2 Combustible Gas Monitoring System

Make/Type Three (3) Rexnord Series880A Gas monitorw/ a Model 225474 controller w/18 Channels

Sampling points at: Flow line Yes/no: YESRig Floor Yes/no: YESShale Shakers Yes/no: YESMud pit room Yes/no: YESMud pump room Yes/no: YES

Alarms at Alarm set at 20 % LEL (Low level) and40 % LEL (High level)

Yes/no: Central control panel

Local alarm (audible/visual/both) Both

L.2.3 H2S Detectors (Portable)

Quantity Six (6) Make/Type Industrial Scientific MSA , Model T-40

Stain tubes for H2S: measuring range L.2.4 Explosimeters

Quantity Make/Type


57/61

Teras Titanium

Page 57 of 61 ised: 30/05/15

L.2.5 CO2 Gas Detectors (Portable)

Quantity Make/Type Stain tubes for CO2: measuring range

L.2.6 O2 Meter (Portable)

Quantity Make/type L.2.7 Fire/Smoke Detectors

Make/type Pyrotronic System 3 Fire detection Yes/no: Yes Smoke detection Yes/no: Yes Central control panel Yes/no:

Alarms Pull boxes

L.3 FIRE FIGHTING EQUIPMENT

L.3.1 Fire Pumps

Quantity One (1) Make/Model Peerless, Model 10 lb-4 Type 4 Stage Output (each) 350 GPM Location

(Alternative Fire Pump) : Normal use of belowPumps are Drill Water pumps

Quantity Two (2), Make/Model Peerless, Model 10 lb Type Output (each) 350 GPM Location Port P tank room

All off take points supplied by all pumps Yes/no:

L.3.2 Hydrants and Hoses Eighteen(18) 10 each 1-1/2" Hose station

Hydrants positioned such that any point may be 8 each 2-1/2" Hose station All stations with 50 ft Hose length

Yes/no:

L.3.3 Portable Fire Extinguishers

Quantity (total) 88 each

Type 1 - CO2 27 each Type 2- Dry chemical 57 each Type 3 - Foam 4 each Water

Halon

L.3.4 Fire Blankets

Quantity Two (2) Location(s)

L.3.5 Fixed Foam System

Make/Type Quantity of foam concentrate stored Foam type Application rate Foam nozzles Automatically injected into fixed

Yes/no:


58/61

Teras Titanium

Page 58 of 61 ised: 30/05/15

L.3.6 Helideck Foam System

Make/Type 2 each Feecon Foam/water Guns ModelFVB-2-6001 each Foam/water single wheel Model8393H2 each Foam applicators1 each Foam tank Model SNPH w/capacity 200 gal1 each Demco pump Model MX w/ 50 hpmotor delivering 500GPM @ 150 psi

Quantity of monitors Two (2) Quantity of foam concentrated stored 200 gal Foam type AFFF 3% Application rate

L.3.7 Fixed Fire Extinguishing System YES

Protected spaces

Automatic shutdown of ventilation fans Yes/no:

L.3.8 Manual Water Deluge System Yes/no: Yes Protected spaced Rig Floor Protected spaced Water supplied from fire main line Yes/no:

L.3.9 Water Sprinkler System

Automatic activation Yes/no: Yes Working pressure 40 psi

Tank capacity Salt water backup Yes/no: Type (wet pipe/dry pipe)

L.4 BREATHING APPARATUS L.4.1 General Sets

Quantity Make Type (demand/positive pressure) Cascade system quick connects Yes/no: Cylinder duration Located at Located at Located at Located at Located at Located at

L.4.2 Escape sets

Quantity Make Type (demand/positive pressure) Cascade system quick connect Yes/no: Cylinder duration

Located at

L.4.3 Cascade Stations

Quantity Make/type Manifold locations/outlets at location Manifold locations/outlets at location Manifold locations/outlets at location Manifold locations/outlets at location Manifold locations/outlets at location


59/61

Teras Titanium

Page 59 of 61 ised: 30/05/15

Manifold locations/outlets at location L.4.4 Breathing Air Recharge Compressor

Quantity Make/Type Compressed air storage capacity

Located at

L.4.5 Compressed Air Breathing Apparatus

Make Type (demand/positive pressure) Air line length Compressed air storage capacity

Including Yes/no: Yes/no: Yes/no: Yes/no: Yes/no:

L.4.6 Breathing Air Purity Test Equipment

Quantity Make/Type

L.5 EMERGENCY FIRST AID EQUIPMENT

L.5.1 First Aid Kits

Quantity Five (5) 2 each in Crash Box, 1 each in TwoCapsules and 1 each in Sick Bay

L.5.2 Burn Kits

Quantity

L.5.3 Resuscitators

Quantity

Charged (spare) oxygen cylinders

L.5.4 Stretchers

Quantity Type Located at

Quantity Type Located at

L.6 HELIDECK RESCUE EQUIPMENT YES

L.6.1 Storage Boxes

Quantity Construction Max height open

L.6.2 Equipment

Aircraft axe Yes/no: Large fireman ’s rescue axe Yes/no: Crowbar 3 ft Yes/no: Heavy duty hacksaw (with spare blades) Yes/no: Grapnel hook with 16ft wire rope attached Yes/no: Quick release knife Yes/no: Bolt croppers Yes/no:


60/61

Teras Titanium

Page 60 of 61 ised: 30/05/15

L.7 EMERGENCY WARNING ALARMS

Approved system to give warning of

Activated from drill floor

L.8 SURVIVAL EQUIPMENT

L.8.1 Lifeboats

Make/Type JIANGYINSHI BEIHAI / JYB75F Quantity Two (2) Capacity 55 man each Locations (frwd/aft/Port/stbd) Fire protection Yes/no: Yes

Radio/EPIRB (see section H.9) Yes/no: NA

Make/Type Quantity Capacity Locations (frwd/aft/Port/stbd) Fire protection Yes/no: Radio/EPIRB (see section H.9) Yes/no:

L.8.2 Life rafts

Make/type BF Goodrich Quantity Four (4) Capacity 25 man each Davit launched Yes/no: Yes (Alexander Davit Launch) Locations (frwd/aft/Port/stbd)

Make/type Quantity Capacity Davit launched Yes/no: Locations (frwd/aft/Port/stbd) L.8.3 Fast Rescue Boat

Make/Type Narwhal, Model SV - 400 Solas RescueBoat

Engine power 40 hp

L.8.4 Personal Flotation Devices

Make/Type Safeguard West, Model S225RT LifeJackets

Quantity 162 each L.8.5 Survival Suits

Make/Type Quantity

L.8.6 Life Ring Buoys Make/type Quantity total Nine (9)

Make / Type Quantity

Make / Type Quantity L.8.7 Work Vests

Quantity Ten (10)


61/61

Teras Titanium

L.8.8 Escape Ladders/Nets

Make/Type Quantity

Make/Type Quantity

M. POLLUTION PREVENTION EQUIPMENT

M.1 SEWAGE TREATMENT

Make/model OmniPure Model 12-MC System type

M.2 GARBAGE COMPACTION

Make/model Dolphin 1787 System type

Make/model System type

M.3 GARBAGE DISPOSAL/GRINDER

Make/model Dolphin System type

M.4 INCINERATOR N/A

Make/model System type

M.5 OILY WATER SEPARATOR

Quantity 1 Make/model BOSS 107C System type Recovered System Nominal throughput 45 GPM

tt iadc specifications - 2015

Documents