tungsten electrodes e3 electrodes easy ways to reach … · air liquide locations 5 easy ways to...
TRANSCRIPT
AIR LIQUIDE LOCATIONS
5EASY WAYSTO REACH US
ANYWHERE, any time
Online Shop 24/7 at my.airliquide.ca
Visit usFind us at m.airliquide.ca
Call us 310-WELD (9353) 1-800-817-7697 (QC & MB)
E-mail us [email protected] [email protected] [email protected] [email protected] [email protected]
Fax backA pre-filled order form listing the cylinder gases you regularly purchase from Air Liquide is faxed or e-mailed to you 48 hours before your scheduled delivery. Just fill it out and fax it back to us.
PACIFICBC Burnaby 604-606-4310BC Castlegar 250-365-2426BC Coquitlam (Dist.) 604-945-9313BC Cranbrook 250-426-5314BC Fort St. John 250-787-2391BC Kamloops 250-374-8864BC Kelowna 250-769-4280BC Langley 604-530-9701BC Nanaimo 250-758-0293BC Prince George 250-562-2638BC Richmond 604-676-3900BC Surrey 604-580-3000BC Terrace 250-635-1606BC Victoria 250-383-3615BC Williams Lake (Dist.) 250-392-6232BC 100 Mile House (Dist.) 250-395-2474
WESTERN CANADAAB Bonnyville 780-826-3152AB Brooks (Dist.) 403-362-5546AB Calgary 310-WELD (9353)AB Camrose (Dist.) 780-672-2452AB Drayton Valley 780-542-4464AB Edmonton (6354 Roper rd) 780-438-5600AB Edmonton (7307 50 st) 310-WELD (9353)AB Edmonton (17811 107 av) 780-483-2050AB Fort McMurray 310-WELD (9353)AB Grande Prairie 310-WELD (9353)AB Lethbridge (Dist.) 403-328-3023AB Lloydminster (Dist.) 780-875-5551
AB Medicine Hat (Dist.) 403-527-8511AB Red Deer 310-WELD (9353)AB Rocky Mountain House 310-WELD (9353)AB Whitecourt 780-778-6778SK Hudson Bay (Dist.) 306-865-2245SK Nipawin (Dist.) 306-862-9858SK North Battleford (Dist.) 306-445-9800SK Prince Albert (Dist.) 306-764-2901SK Regina 306-310-9353SK Saskatoon 306-310-9353MB Brandon 204-728-5050 MB Winnipeg 855-295-WELD (9353)
ONTARIOON Barrie 705-726-3621ON Belleville 613-966-6511ON Bramalea 905-793-2000ON Brantford 519-756-7200ON Burlington (Hub) 905-335-4877ON Cambridge 519-624-4413ON Concord 416-244-1407ON Cornwall (Dist.) 613-938-5710ON Cornwall (Dist.) 613-932-8730ON Gormley (Dist.) 905-841-1840ON Iroquois (Dist.) 613-652-4055ON Kingston 613-384-3665ON London 519-455-3990ON Milton 905-876-0107ON Mississauga 905-564-1433ON Niagara Falls 905-356-6045ON Oshawa 905-576-1860
ON Ottawa 613-225-7550ON Peterborough (Dist.) 705-748-5464ON Renfrew (Dist.) 613-432-3891ON Sarnia (Dist.) 519-383-7022ON Sarnia 519-336-3900ON Sault Ste. Marie 705-254-6445ON Smiths Falls 613-283-3146ON Stoney Creek (Dist.) 905-664-5088ON Sudbury 705-674-7777ON Thunder Bay 807-310-9353ON Timmins 705-267-1158ON Toronto (Dist.) 416-745-1304ON Windsor 519-969-0610
QUEBECQC Alma (Dist.) 418-662-0302QC Amos (Dist.) 819-732-3251QC Boucherville 450-641-6147QC Châteauguay (Dist.) 450-699-3334QC Dolbeau-Mistassini (Dist.) 418-276-0554QC Drummondville 819-478-1809QC Gatineau 819-893-1945QC Granby (Dist.) 450-378-9001QC Havre St-Pierre (Dist.) 418-538-2576QC Joliette (Dist.) 450-756-4444QC Jonquière 418-695-1415QC Laval 450-687-7046QC Marieville (Dist.) 450-460-7255 QC Mont-Laurier (Dist.) 819-623-7555 QC Mont-Laurier (Dist.) 819-585-2277 QC Montréal/Anjou 514-356-7600
QC Notre-Dame-du-Bon-Conseil (Dist.) 819-336-5333 QC Pintendre (Dist.) 418-837-3033QC Rimouski 418-723-6272QC Rouyn-Noranda 819-764-7018QC Sept-Îles 418-962-9713QC Sherbrooke 819-566-4063QC St-Eustache (Dist.) 450-974-1116QC St-Jean-Port-Joli 418-598-3333QC St-Jérôme 450-476-9018QC Thetford Mines (Dist.) 418-335-2989QC Trois-Rivières 819-694-7018QC Val-D’Or 819-874-7018QC Valleyfield (Dist.) 450-373-1792QC Vanier 418-683-1917
ATLANTICNS Dartmouth 902-468-5152NS New Minas (Dist.) 902-681-7082NS New Glasgow 902-755-6441NS Point Tupper (Dist.) 902-625-1876NS Sydney 902-562-5521NB Bathurst (Dist.) 506-546-9834NB Fredericton 506-459-1585NB Grand Falls (Dist.) 506-473-2966NB Moncton 506-857-3280NB Saint John 506-634-8960NL Labrador City (Wabush) 709-944-2864NL Corner Brook 709-639-4202NL Grand Falls-Windsor 709-292-1117NL Mount Pearl 709-758-2765PE Charlottetown (Dist.) 902-368-1208
Promotion sale prices are in effect from 1st to 30th September 2018, at participating locations in Canada only. Air Liquide Canada Inc. reserves the right to: limit quantities, correct any unintentional error that may appear in this flyer’s text or pictures, substitute advertised product by an equivalent product. Our lowest price guarantee applies only to items featured in this flyer and for identical products (same manufacturer, same model and manufacturer part number). Additional charges, such as freight, delivery and material surcharge might apply.
ALEN™, ALMIG™, ALTIG™, BLUESHIELD™, BLUESHIELD CRYSTAL™, BLUESHIELD MNR™, DUO™, EXCELARC™, LA 18 PLUS™, MAPP™, OMNIWELD™, NUCLEAR C™, UNISHIELD™ and WOLFPAC™, in Canada, are registered trademarks of Air Liquide Canada Inc. AIR LIQUIDE™, AIR LIQUIDE WELDING™, ALBEE™, ALIGAL™, ALPHAGAZ™, ALTOP™, ARCAL™, EXELTOP™, FLAMAL™, FLOXAL™ and LASAL™ are registered trademarks of L’Air Liquide S.A. All others names, brands and marks are used for identification purposes only and may be trademarks or registered trademarks of their respective owners.
TUNGSTEN ELECTRODES• Choosing the right tungsten electrodes
and filler metal rods are crucial first steps in successful gas tungsten arc welding (GTAW)
• Length: 178 mm (7”), Ground finish
ELECTRODES
GOUGING ELECTRODES• BLUESHIELD™ gouging carbon electrodes are designed
especially for the air carbon-arc metal removal process.• DCCC POINTED • Length: 305 mm (12”)• 50/PKG
• Brazing • Heating• Welding
• Arts and Craft• Ornamental work
• TIG/MIG • Construction industry
• Auto repairs• Mechanics
• HVAC Equipment
maintenance• Leak tests
• Yearly checks
MAKE YOUR LIFE EASY WITH
A0273866 4.8 mm (3/16”) $15A0273867 6.4 mm (1/4”) $17A0273868 7.9 mm (5/16”) $18A0273869 9.5 mm (3/8”) $20
A0403408 1.0 mm (0.040”) 10/pkg $18.50A0403409 1.6 mm (1/16”) 10/pkg $23.50A0403410 1.6 mm (1/16”) 3/pkg $15.50A0403411 2.4 mm (3/32”) 10/pkg $42.50A0403412 2.4 mm (3/32”) 3/pkg $18.50A0403413 3.2 mm (1/8”) 10/pkg $79.50A0403414 3.2 mm (1/8”) 3/pkg $32.50A0403415 4.0 mm (5/32”) 10/pkg $136.50
AL’S TIPS!
TUNGSTEN ELECTRODES
Air Liquide recommends the use of E3 Electrodes for the following reasons:• Best choice to replace thoriated electrodes
• Longer life
• Non-radioactive additives
• Can be used in both DC & AC processes
• Stable tip and arc geometry
• Every electrode is Eddy Current tested for defects.
AL’S TIPS!
With our Albee™ range of portable, rental-free gas cylinders, Air Liquide can help you work faster with more mobility and achieve better results.
SAFERFully protected valveand regulator.
EASY TO BUYPay and pick-up your cylinder through a network of resellers.
EASY TO USEEasy set-up with the graduated handwheel.
EASY TO EXCHANGEJust exchange it and only pay for the gas consumed.
Oxygen Acetylene Argon Argon Mix Nitrogen
ALBEE™ FLAME ALBEE™ WELD ALBEE™ COOL
Prices in effect from September 1st to 30th 2018
Air Liquide will match advertised prices from the competition for all items identical to those featured in this flyer. Some products in this flyer might not be available at all locations. Please contact us for details.
1-800-817-7697 310-WELD (9353) (ON, AB, SK)
BLUESHIELD.CAAIRLIQUIDE.CA find us @ m.airliquide.ca
DISCOVER OUR NEW BLUESHIELD™ OUTFIT
NEW
BLUESHIELD™ PROMO | SEPTEMBER 2018
THE TRUE FORCE IN WELDING™
Cylinder Gases
Abrasives
Safety Products
Electrodes
AL’S TIPS!
FIND OUT MORE ABOUT AL’S TIPS:
• FLASHBACK ARRESTORS
• OVER-WELDING
• GRINDING
• ALBEE™ CYLINDERS RANGE
• E3 ELECTRODES
ALBEEKIT
ALBEEKITA1077661 | $195
• BLU-FIR312: Torch handle• BLU-FIR512B: Cutting attachment• BLU-7122: Single-flame brazing/
welding tip, Size: 2• BLU-8020: Cutting tip, Size: 0• Grade “T” welding twin-hose,
¼”, 20ft• Flint lighter, welding goggles* *with appropriate optional tips
The BLUESHIELD™ Advantage
• Increased tip life• Excellent visibility for precision cutting• Safer• Reliable tip seating
BLUE COWHIDE GRAIN TIG WELDER GLOVESA0288339 | M | $19.95
• Outer shell is made from grain cowhide leather • 13 3/4 po length • Fully 3-Ply Kevlar stitched
ECONOWELD WELDING JACKETA0303489 | L | $59.99
• Made using heat and abrasion select split cowhide
• The garments are sewn with Dupont Kevlar thread for added strength and the seams are riveted at major stress points
Consult our new catalog with more than 1400 Safety Products!
DISCOVER OUR NEW BLUESHIELD™ OUTFIT
NEW
GAS APPARATUS
AL’S TIPS!
AL’S TIPS!
AL’S TIPS!
Flashback Incident
Air Liquide strongly recommends the
use of Flashback arrestors on gas
hoses in oxy-fuel welding, cutting
and heating operations.
A flashback occurs when the flame passes right through the torch and
into the hose due to the presence of a mixture of oxygen and fuel gas
in the system. The flame burns so fast that you don’t have time to shut
the torch valves before it passes through the torch. A flashback can
burst the hoses or progress back to the regulators and cylinders with
devastating consequences.
Where should a flashback arrestor be installed?
Flashback arrestors can be installed at the torch inlets, at the regula-
tor outlets or both. Installation at the torch inlets has the advantage of
being the farthest downstream, and so protects the hose and the
operator the most. Installation at the regulator outlet is a cleaner
location that is less subject to damage and fouling from dirt that can
come from the hose. Regulator mounted units can also be larger, with
greater flow capacity for high flow applications, without hindering the
easy manipulation of the torch.
Most Provinces in Canada have regulations that dictate the required
location of flashback arrestors in the system. Users must follow
the regulations in effect in their Province.
Flashback Arrestors
SAFETY PRODUCTS
AIRLIQUIDE.CA/SAFETYPRODUCTS
A0237393 A0237395
A0237393 Brush, Wire scratch, Curved handle $3
A0237395 Brush, Wire scratch, Shoe handle $4
A0286303 Fillet weld gauge set $28A0286459 Cam type weld gauge $40
A0295393 200 Amp, 4.0 mm (5/32”) $14A0295394 250 Amp, 5.0 mm (3/16”) $15A0295395 300 Amp, 6.0 mm (1/4”) $18
ELECTRODE HOLDER, TWECO STYLEThe grooved jaw allows bending of the electrode and quick release
SCRATCH BRUSHESIdeal to prepare surfaces for painting, oxide removal and cosmetic finishing without having to use chemicals
FILLET WELD GAUGESThe fillet weld gauge is used for checking alignment, confirming dimensions before welding and verifying weld dimensions
A0296040 7.6 m (25’) $28A0296038 15.2 m (50’) $48A0296039 30.5 m (100’) $95
GRADE ‘T’ TWIN-HOSE, OXY-FUEL GASDiameter: 6.4 mm (1/4”)
CHIPPING HAMMER A0291481 | $5
• Standard steel-grip Tomahawk• Cone and Chisel • Spring handle
ELECTRODE HOLDER, BERNARD STYLEA0295501 | $13
The “Shortstub” screw-type electrode holder allow bending of the electrode in any direction
ANTI-SPATTER GELA0213960 | $5
Solvent-based, 473 ml (16 fl. oz)
MIG HELPER PLIER A0344241 | $9
TOOLS & ACCESSORIES
FILLET WELD GAUGES
Over-welding refers to excess material that is applied to the welded bead.
(ex; doing a ⅜’’ filet when ¼’’ is required). It’s a common problem that can
increase production cost dramatically. In addition to excess material being used
(filler metal, gas), the biggest cost increase will come from extra working hours
needed to perform a slightly bigger size weld.
• Accepted over-welding is limited to 20% by welding codes.
• Many users have over-welding values well in excess of 50% which translates
into 50% more consumables and 50% more time spent manufacturing the
same amount of parts.
• Reducing over-welding to 20% would then reduce Overall Cost of
Welding by 30%!
Measure your savings with the BLUESHIELD™ Advantage!A0286459
A0286303
BLUECHOP™
“Cuts virtually anything with ease”
A NUMBER DIAM. THICKNESS ARBOR TYPE GRADE MAX RPM STD PACK. PRICE
A1066624 4-1/2'' (115 mm) 3/64'' (1.2 mm) 7/8'' (22.23 mm) Type 1 Flat A-60 SBF 13,300 25 $3.00A1066625 5'' (125 mm) 3/64'' (1.2 mm) 7/8'' (22.23 mm) Type 1 Flat A-60 SBF 12,200 25 $3.25A1066626 6'' (150 mm) 3/64'' (1.2 mm) 7/8'' (22.23 mm) Type 1 Flat A-60 SBF 10,200 25 $4.00A1066627 4-1/2'' (115 mm) 3/64'' (1.2 mm) 7/8'' (22.23 mm) Type 27* A-60 SBF 13,300 25 $3.20A1066628 5'' (125 mm) 3/64'' (1.2 mm) 7/8'' (22.23 mm) Type 27* A-60 SBF 12,200 25 $3.45A1066629 6'' (150 mm) 3/64'' (1.2 mm) 7/8'' (22.23 mm) Type 27* A-60 SBF 10,200 25 $4.25
A NUMBER DIAM. THICKNESS ARBOR TYPE GRADE MAX RPM STD PACK. PRICE
A1066642 12'' (305 mm) 3/32'' (2.5 mm) 1'' (25.4 mm) Type 1 Flat A-30 RBF 5,100 10 $7.00A1066643 14'' (355 mm) 3/32'' (2.5 mm) 1'' (25.4 mm) Type 1 Flat A-30 RBF 4,400 10 $8.00
INTRODUCING OUR
NEW LINE OF HIGH-PERFORMANCE ABRASIVES
BLUEGRIND™
“Perfect combination of comfort and ease of grinding”
A NUMBER DIAM. THICKNESS ARBOR TYPE GRADE MAX RPM STD PACK. PRICE
A1066621 5'' (125 mm) 1/4'' (7 mm) 7/8'' (22.23 mm) Type 27* A-24 SBF 12,200 25 $3.65A1066622 6'' (150 mm) 1/4'' (7 mm) 7/8'' (22.23 mm) Type 27* A-24 SBF 10,200 25 $4.75A1066623 7'' (180 mm) 1/4'' (7 mm) 7/8'' (22.23 mm) Type 27* A-24 SBF 8,600 25 $5.25A1066630 4-1/2'' (115 mm) 1/8'' (3.5 mm) 7/8'' (22.23 mm) Type 27* A-30 SBF 13,300 25 $3.20A1066631 5'' (125 mm) 1/8'' (3.5 mm) 7/8'' (22.23 mm) Type 27* A-30 SBF 12,200 25 $3.45A1066632 6'' (150 mm) 1/8'' (3.5 mm) 7/8'' (22.23 mm) Type 27* A-30 SBF 10,200 25 $4.25A1066633 7'' (180 mm) 1/8'' (3.5 mm) 7/8'' (22.23 mm) Type 27* A-30 SBF 8,600 25 $4.75A1066644 4-1/2'' (115 mm) 1/4'' (7 mm) 7/8'' (22.23 mm) Type 27* A-24 SBF 13,300 25 $3.50
BLUEBLEND™
“The most comfortable disc on the market”
BLUECUT™
“Works for all applications”
MADE TO WITHSTAND THE TOUGHEST JOBS, BLUESHIELD™ DELIVERS:
• Best-in-class material removal rate
• Long wheel life
• Superior performance
• Improved safety
• Lower costs — for bottom-line savings
• Better user experience
ABRASIVES
TYPES OF GRINDING WHEELS
SAFE PRACTICES
GRINDING FLAT
Low angle grinding will cause BREAKOUTS
SIDE GRINDING
Compromises reinforcement integrity causing wheel BREAKAGE
A0248400 200 Amp $10A0248401 300 Amp $13A0248399 500 Amp $15
GROUND CLAMP, ALERCO STYLE
A NUMBER DIAM. THICKNESS ARBOR TYPE GRADE MAX RPM STD PACK. PRICE
A1066634 4-1/2'' (115 mm) - 7/8'' (22.23 mm) Type 27* 40 13,300 10 $5.00A1066635 4-1/2'' (115 mm) - 7/8'' (22.23 mm) Type 27* 60 13,300 10 $5.00A1066636 4-1/2'' (115 mm) - 7/8'' (22.23 mm) Type 27* 80 13,300 10 $5.00A1066637 4-1/2'' (115 mm) - 7/8'' (22.23 mm) Type 27* 120 13,300 10 $5.00A1066638 5'' (125 mm) - 7/8'' (22.23 mm) Type 27* 40 12,200 10 $5.50A1066639 5'' (125 mm) - 7/8'' (22.23 mm) Type 27* 60 12,200 10 $5.50A1066640 5'' (125 mm) - 7/8'' (22.23 mm) Type 27* 80 12,200 10 $5.50A1066641 5'' (125 mm) - 7/8'' (22.23 mm) Type 27* 120 12,200 10 $5.50
TYPE 28
Purpose:FLAT GRINDINGGRINDING ANGLE = 5°
TYPE 29
Purpose:
FLAT & CURVED SURFACE GRINDINGGRINDING ANGLE = 10°
TYPE 27
Purpose:REGULAR GRINDING
GRINDING ANGLE = 20°
WORKING PRESSURETOO MUCH PRESSURE
• Burns out angle grinder’s motor
• Generates more fatigue
• Could cause wheel breakage
• Cause more wheel wear
NOT ENOUGH PRESSURE
• Less productive (less removal)
• Wheel can glaze
Amperage
Work to tools optimal amp rating. More sparks = More Removal
EXCESSMATERIAL
* DEPRESSED CENTER
ALBEEKITA1077661 | $195
• BLU-FIR312: Torch handle• BLU-FIR512B: Cutting attachment• BLU-7122: Single-flame brazing/
welding tip, Size: 2• BLU-8020: Cutting tip, Size: 0• Grade “T” welding twin-hose,
¼”, 20ft• Flint lighter, welding goggles* *with appropriate optional tips
The BLUESHIELD™ Advantage
• Increased tip life• Excellent visibility for precision cutting• Safer• Reliable tip seating
BLUE COWHIDE GRAIN TIG WELDER GLOVESA0288339 | M | $19.95
• Outer shell is made from grain cowhide leather • 13 3/4 po length • Fully 3-Ply Kevlar stitched
ECONOWELD WELDING JACKETA0303489 | L | $59.99
• Made using heat and abrasion select split cowhide
• The garments are sewn with Dupont Kevlar thread for added strength and the seams are riveted at major stress points
Consult our new catalog with more than 1400 Safety Products!
DISCOVER OUR NEW BLUESHIELD™ OUTFIT
NEW
GAS APPARATUS
AL’S TIPS!
AL’S TIPS!
AL’S TIPS!
Flashback Incident
Air Liquide strongly recommends the
use of Flashback arrestors on gas
hoses in oxy-fuel welding, cutting
and heating operations.
A flashback occurs when the flame passes right through the torch and
into the hose due to the presence of a mixture of oxygen and fuel gas
in the system. The flame burns so fast that you don’t have time to shut
the torch valves before it passes through the torch. A flashback can
burst the hoses or progress back to the regulators and cylinders with
devastating consequences.
Where should a flashback arrestor be installed?
Flashback arrestors can be installed at the torch inlets, at the regula-
tor outlets or both. Installation at the torch inlets has the advantage of
being the farthest downstream, and so protects the hose and the
operator the most. Installation at the regulator outlet is a cleaner
location that is less subject to damage and fouling from dirt that can
come from the hose. Regulator mounted units can also be larger, with
greater flow capacity for high flow applications, without hindering the
easy manipulation of the torch.
Most Provinces in Canada have regulations that dictate the required
location of flashback arrestors in the system. Users must follow
the regulations in effect in their Province.
Flashback Arrestors
SAFETY PRODUCTS
AIRLIQUIDE.CA/SAFETYPRODUCTS
A0237393 A0237395
A0237393 Brush, Wire scratch, Curved handle $3
A0237395 Brush, Wire scratch, Shoe handle $4
A0286303 Fillet weld gauge set $28A0286459 Cam type weld gauge $40
A0295393 200 Amp, 4.0 mm (5/32”) $14A0295394 250 Amp, 5.0 mm (3/16”) $15A0295395 300 Amp, 6.0 mm (1/4”) $18
ELECTRODE HOLDER, TWECO STYLEThe grooved jaw allows bending of the electrode and quick release
SCRATCH BRUSHESIdeal to prepare surfaces for painting, oxide removal and cosmetic finishing without having to use chemicals
FILLET WELD GAUGESThe fillet weld gauge is used for checking alignment, confirming dimensions before welding and verifying weld dimensions
A0296040 7.6 m (25’) $28A0296038 15.2 m (50’) $48A0296039 30.5 m (100’) $95
GRADE ‘T’ TWIN-HOSE, OXY-FUEL GASDiameter: 6.4 mm (1/4”)
CHIPPING HAMMER A0291481 | $5
• Standard steel-grip Tomahawk• Cone and Chisel • Spring handle
ELECTRODE HOLDER, BERNARD STYLEA0295501 | $13
The “Shortstub” screw-type electrode holder allow bending of the electrode in any direction
ANTI-SPATTER GELA0213960 | $5
Solvent-based, 473 ml (16 fl. oz)
MIG HELPER PLIER A0344241 | $9
TOOLS & ACCESSORIES
FILLET WELD GAUGES
Over-welding refers to excess material that is applied to the welded bead.
(ex; doing a ⅜’’ filet when ¼’’ is required). It’s a common problem that can
increase production cost dramatically. In addition to excess material being used
(filler metal, gas), the biggest cost increase will come from extra working hours
needed to perform a slightly bigger size weld.
• Accepted over-welding is limited to 20% by welding codes.
• Many users have over-welding values well in excess of 50% which translates
into 50% more consumables and 50% more time spent manufacturing the
same amount of parts.
• Reducing over-welding to 20% would then reduce Overall Cost of
Welding by 30%!
Measure your savings with the BLUESHIELD™ Advantage!A0286459
A0286303
BLUECHOP™
“Cuts virtually anything with ease”
A NUMBER DIAM. THICKNESS ARBOR TYPE GRADE MAX RPM STD PACK. PRICE
A1066624 4-1/2'' (115 mm) 3/64'' (1.2 mm) 7/8'' (22.23 mm) Type 1 Flat A-60 SBF 13,300 25 $3.00A1066625 5'' (125 mm) 3/64'' (1.2 mm) 7/8'' (22.23 mm) Type 1 Flat A-60 SBF 12,200 25 $3.25A1066626 6'' (150 mm) 3/64'' (1.2 mm) 7/8'' (22.23 mm) Type 1 Flat A-60 SBF 10,200 25 $4.00A1066627 4-1/2'' (115 mm) 3/64'' (1.2 mm) 7/8'' (22.23 mm) Type 27* A-60 SBF 13,300 25 $3.20A1066628 5'' (125 mm) 3/64'' (1.2 mm) 7/8'' (22.23 mm) Type 27* A-60 SBF 12,200 25 $3.45A1066629 6'' (150 mm) 3/64'' (1.2 mm) 7/8'' (22.23 mm) Type 27* A-60 SBF 10,200 25 $4.25
A NUMBER DIAM. THICKNESS ARBOR TYPE GRADE MAX RPM STD PACK. PRICE
A1066642 12'' (305 mm) 3/32'' (2.5 mm) 1'' (25.4 mm) Type 1 Flat A-30 RBF 5,100 10 $7.00A1066643 14'' (355 mm) 3/32'' (2.5 mm) 1'' (25.4 mm) Type 1 Flat A-30 RBF 4,400 10 $8.00
INTRODUCING OUR
NEW LINE OF HIGH-PERFORMANCE ABRASIVES
BLUEGRIND™
“Perfect combination of comfort and ease of grinding”
A NUMBER DIAM. THICKNESS ARBOR TYPE GRADE MAX RPM STD PACK. PRICE
A1066621 5'' (125 mm) 1/4'' (7 mm) 7/8'' (22.23 mm) Type 27* A-24 SBF 12,200 25 $3.65A1066622 6'' (150 mm) 1/4'' (7 mm) 7/8'' (22.23 mm) Type 27* A-24 SBF 10,200 25 $4.75A1066623 7'' (180 mm) 1/4'' (7 mm) 7/8'' (22.23 mm) Type 27* A-24 SBF 8,600 25 $5.25A1066630 4-1/2'' (115 mm) 1/8'' (3.5 mm) 7/8'' (22.23 mm) Type 27* A-30 SBF 13,300 25 $3.20A1066631 5'' (125 mm) 1/8'' (3.5 mm) 7/8'' (22.23 mm) Type 27* A-30 SBF 12,200 25 $3.45A1066632 6'' (150 mm) 1/8'' (3.5 mm) 7/8'' (22.23 mm) Type 27* A-30 SBF 10,200 25 $4.25A1066633 7'' (180 mm) 1/8'' (3.5 mm) 7/8'' (22.23 mm) Type 27* A-30 SBF 8,600 25 $4.75A1066644 4-1/2'' (115 mm) 1/4'' (7 mm) 7/8'' (22.23 mm) Type 27* A-24 SBF 13,300 25 $3.50
BLUEBLEND™
“The most comfortable disc on the market”
BLUECUT™
“Works for all applications”
MADE TO WITHSTAND THE TOUGHEST JOBS, BLUESHIELD™ DELIVERS:
• Best-in-class material removal rate
• Long wheel life
• Superior performance
• Improved safety
• Lower costs — for bottom-line savings
• Better user experience
ABRASIVES
TYPES OF GRINDING WHEELS
SAFE PRACTICES
GRINDING FLAT
Low angle grinding will cause BREAKOUTS
SIDE GRINDING
Compromises reinforcement integrity causing wheel BREAKAGE
A0248400 200 Amp $10A0248401 300 Amp $13A0248399 500 Amp $15
GROUND CLAMP, ALERCO STYLE
A NUMBER DIAM. THICKNESS ARBOR TYPE GRADE MAX RPM STD PACK. PRICE
A1066634 4-1/2'' (115 mm) - 7/8'' (22.23 mm) Type 27* 40 13,300 10 $5.00A1066635 4-1/2'' (115 mm) - 7/8'' (22.23 mm) Type 27* 60 13,300 10 $5.00A1066636 4-1/2'' (115 mm) - 7/8'' (22.23 mm) Type 27* 80 13,300 10 $5.00A1066637 4-1/2'' (115 mm) - 7/8'' (22.23 mm) Type 27* 120 13,300 10 $5.00A1066638 5'' (125 mm) - 7/8'' (22.23 mm) Type 27* 40 12,200 10 $5.50A1066639 5'' (125 mm) - 7/8'' (22.23 mm) Type 27* 60 12,200 10 $5.50A1066640 5'' (125 mm) - 7/8'' (22.23 mm) Type 27* 80 12,200 10 $5.50A1066641 5'' (125 mm) - 7/8'' (22.23 mm) Type 27* 120 12,200 10 $5.50
TYPE 28
Purpose:FLAT GRINDINGGRINDING ANGLE = 5°
TYPE 29
Purpose:
FLAT & CURVED SURFACE GRINDINGGRINDING ANGLE = 10°
TYPE 27
Purpose:REGULAR GRINDING
GRINDING ANGLE = 20°
WORKING PRESSURETOO MUCH PRESSURE
• Burns out angle grinder’s motor
• Generates more fatigue
• Could cause wheel breakage
• Cause more wheel wear
NOT ENOUGH PRESSURE
• Less productive (less removal)
• Wheel can glaze
Amperage
Work to tools optimal amp rating. More sparks = More Removal
EXCESSMATERIAL
* DEPRESSED CENTER
ALBEEKITA1077661 | $195
• BLU-FIR312: Torch handle• BLU-FIR512B: Cutting attachment• BLU-7122: Single-flame brazing/
welding tip, Size: 2• BLU-8020: Cutting tip, Size: 0• Grade “T” welding twin-hose,
¼”, 20ft• Flint lighter, welding goggles* *with appropriate optional tips
The BLUESHIELD™ Advantage
• Increased tip life• Excellent visibility for precision cutting• Safer• Reliable tip seating
BLUE COWHIDE GRAIN TIG WELDER GLOVESA0288339 | M | $19.95
• Outer shell is made from grain cowhide leather • 13 3/4 po length • Fully 3-Ply Kevlar stitched
ECONOWELD WELDING JACKETA0303489 | L | $59.99
• Made using heat and abrasion select split cowhide
• The garments are sewn with Dupont Kevlar thread for added strength and the seams are riveted at major stress points
Consult our new catalog with more than 1400 Safety Products!
DISCOVER OUR NEW BLUESHIELD™ OUTFIT
NEW
GAS APPARATUS
AL’S TIPS!
AL’S TIPS!
AL’S TIPS!
Flashback Incident
Air Liquide strongly recommends the
use of Flashback arrestors on gas
hoses in oxy-fuel welding, cutting
and heating operations.
A flashback occurs when the flame passes right through the torch and
into the hose due to the presence of a mixture of oxygen and fuel gas
in the system. The flame burns so fast that you don’t have time to shut
the torch valves before it passes through the torch. A flashback can
burst the hoses or progress back to the regulators and cylinders with
devastating consequences.
Where should a flashback arrestor be installed?
Flashback arrestors can be installed at the torch inlets, at the regula-
tor outlets or both. Installation at the torch inlets has the advantage of
being the farthest downstream, and so protects the hose and the
operator the most. Installation at the regulator outlet is a cleaner
location that is less subject to damage and fouling from dirt that can
come from the hose. Regulator mounted units can also be larger, with
greater flow capacity for high flow applications, without hindering the
easy manipulation of the torch.
Most Provinces in Canada have regulations that dictate the required
location of flashback arrestors in the system. Users must follow
the regulations in effect in their Province.
Flashback Arrestors
SAFETY PRODUCTS
AIRLIQUIDE.CA/SAFETYPRODUCTS
A0237393 A0237395
A0237393 Brush, Wire scratch, Curved handle $3
A0237395 Brush, Wire scratch, Shoe handle $4
A0286303 Fillet weld gauge set $28A0286459 Cam type weld gauge $40
A0295393 200 Amp, 4.0 mm (5/32”) $14A0295394 250 Amp, 5.0 mm (3/16”) $15A0295395 300 Amp, 6.0 mm (1/4”) $18
ELECTRODE HOLDER, TWECO STYLEThe grooved jaw allows bending of the electrode and quick release
SCRATCH BRUSHESIdeal to prepare surfaces for painting, oxide removal and cosmetic finishing without having to use chemicals
FILLET WELD GAUGESThe fillet weld gauge is used for checking alignment, confirming dimensions before welding and verifying weld dimensions
A0296040 7.6 m (25’) $28A0296038 15.2 m (50’) $48A0296039 30.5 m (100’) $95
GRADE ‘T’ TWIN-HOSE, OXY-FUEL GASDiameter: 6.4 mm (1/4”)
CHIPPING HAMMER A0291481 | $5
• Standard steel-grip Tomahawk• Cone and Chisel • Spring handle
ELECTRODE HOLDER, BERNARD STYLEA0295501 | $13
The “Shortstub” screw-type electrode holder allow bending of the electrode in any direction
ANTI-SPATTER GELA0213960 | $5
Solvent-based, 473 ml (16 fl. oz)
MIG HELPER PLIER A0344241 | $9
TOOLS & ACCESSORIES
FILLET WELD GAUGES
Over-welding refers to excess material that is applied to the welded bead.
(ex; doing a ⅜’’ filet when ¼’’ is required). It’s a common problem that can
increase production cost dramatically. In addition to excess material being used
(filler metal, gas), the biggest cost increase will come from extra working hours
needed to perform a slightly bigger size weld.
• Accepted over-welding is limited to 20% by welding codes.
• Many users have over-welding values well in excess of 50% which translates
into 50% more consumables and 50% more time spent manufacturing the
same amount of parts.
• Reducing over-welding to 20% would then reduce Overall Cost of
Welding by 30%!
Measure your savings with the BLUESHIELD™ Advantage!A0286459
A0286303
BLUECHOP™
“Cuts virtually anything with ease”
A NUMBER DIAM. THICKNESS ARBOR TYPE GRADE MAX RPM STD PACK. PRICE
A1066624 4-1/2'' (115 mm) 3/64'' (1.2 mm) 7/8'' (22.23 mm) Type 1 Flat A-60 SBF 13,300 25 $3.00A1066625 5'' (125 mm) 3/64'' (1.2 mm) 7/8'' (22.23 mm) Type 1 Flat A-60 SBF 12,200 25 $3.25A1066626 6'' (150 mm) 3/64'' (1.2 mm) 7/8'' (22.23 mm) Type 1 Flat A-60 SBF 10,200 25 $4.00A1066627 4-1/2'' (115 mm) 3/64'' (1.2 mm) 7/8'' (22.23 mm) Type 27* A-60 SBF 13,300 25 $3.20A1066628 5'' (125 mm) 3/64'' (1.2 mm) 7/8'' (22.23 mm) Type 27* A-60 SBF 12,200 25 $3.45A1066629 6'' (150 mm) 3/64'' (1.2 mm) 7/8'' (22.23 mm) Type 27* A-60 SBF 10,200 25 $4.25
A NUMBER DIAM. THICKNESS ARBOR TYPE GRADE MAX RPM STD PACK. PRICE
A1066642 12'' (305 mm) 3/32'' (2.5 mm) 1'' (25.4 mm) Type 1 Flat A-30 RBF 5,100 10 $7.00A1066643 14'' (355 mm) 3/32'' (2.5 mm) 1'' (25.4 mm) Type 1 Flat A-30 RBF 4,400 10 $8.00
INTRODUCING OUR
NEW LINE OF HIGH-PERFORMANCE ABRASIVES
BLUEGRIND™
“Perfect combination of comfort and ease of grinding”
A NUMBER DIAM. THICKNESS ARBOR TYPE GRADE MAX RPM STD PACK. PRICE
A1066621 5'' (125 mm) 1/4'' (7 mm) 7/8'' (22.23 mm) Type 27* A-24 SBF 12,200 25 $3.65A1066622 6'' (150 mm) 1/4'' (7 mm) 7/8'' (22.23 mm) Type 27* A-24 SBF 10,200 25 $4.75A1066623 7'' (180 mm) 1/4'' (7 mm) 7/8'' (22.23 mm) Type 27* A-24 SBF 8,600 25 $5.25A1066630 4-1/2'' (115 mm) 1/8'' (3.5 mm) 7/8'' (22.23 mm) Type 27* A-30 SBF 13,300 25 $3.20A1066631 5'' (125 mm) 1/8'' (3.5 mm) 7/8'' (22.23 mm) Type 27* A-30 SBF 12,200 25 $3.45A1066632 6'' (150 mm) 1/8'' (3.5 mm) 7/8'' (22.23 mm) Type 27* A-30 SBF 10,200 25 $4.25A1066633 7'' (180 mm) 1/8'' (3.5 mm) 7/8'' (22.23 mm) Type 27* A-30 SBF 8,600 25 $4.75A1066644 4-1/2'' (115 mm) 1/4'' (7 mm) 7/8'' (22.23 mm) Type 27* A-24 SBF 13,300 25 $3.50
BLUEBLEND™
“The most comfortable disc on the market”
BLUECUT™
“Works for all applications”
MADE TO WITHSTAND THE TOUGHEST JOBS, BLUESHIELD™ DELIVERS:
• Best-in-class material removal rate
• Long wheel life
• Superior performance
• Improved safety
• Lower costs — for bottom-line savings
• Better user experience
ABRASIVES
TYPES OF GRINDING WHEELS
SAFE PRACTICES
GRINDING FLAT
Low angle grinding will cause BREAKOUTS
SIDE GRINDING
Compromises reinforcement integrity causing wheel BREAKAGE
A0248400 200 Amp $10A0248401 300 Amp $13A0248399 500 Amp $15
GROUND CLAMP, ALERCO STYLE
A NUMBER DIAM. THICKNESS ARBOR TYPE GRADE MAX RPM STD PACK. PRICE
A1066634 4-1/2'' (115 mm) - 7/8'' (22.23 mm) Type 27* 40 13,300 10 $5.00A1066635 4-1/2'' (115 mm) - 7/8'' (22.23 mm) Type 27* 60 13,300 10 $5.00A1066636 4-1/2'' (115 mm) - 7/8'' (22.23 mm) Type 27* 80 13,300 10 $5.00A1066637 4-1/2'' (115 mm) - 7/8'' (22.23 mm) Type 27* 120 13,300 10 $5.00A1066638 5'' (125 mm) - 7/8'' (22.23 mm) Type 27* 40 12,200 10 $5.50A1066639 5'' (125 mm) - 7/8'' (22.23 mm) Type 27* 60 12,200 10 $5.50A1066640 5'' (125 mm) - 7/8'' (22.23 mm) Type 27* 80 12,200 10 $5.50A1066641 5'' (125 mm) - 7/8'' (22.23 mm) Type 27* 120 12,200 10 $5.50
TYPE 28
Purpose:FLAT GRINDINGGRINDING ANGLE = 5°
TYPE 29
Purpose:
FLAT & CURVED SURFACE GRINDINGGRINDING ANGLE = 10°
TYPE 27
Purpose:REGULAR GRINDING
GRINDING ANGLE = 20°
WORKING PRESSURETOO MUCH PRESSURE
• Burns out angle grinder’s motor
• Generates more fatigue
• Could cause wheel breakage
• Cause more wheel wear
NOT ENOUGH PRESSURE
• Less productive (less removal)
• Wheel can glaze
Amperage
Work to tools optimal amp rating. More sparks = More Removal
EXCESSMATERIAL
* DEPRESSED CENTER
AIR LIQUIDE LOCATIONS
5EASY WAYSTO REACH US
ANYWHERE, any time
Online Shop 24/7 at my.airliquide.ca
Visit usFind us at m.airliquide.ca
Call us 310-WELD (9353) 1-800-817-7697 (QC & MB)
E-mail us [email protected] [email protected] [email protected] [email protected] [email protected]
Fax backA pre-filled order form listing the cylinder gases you regularly purchase from Air Liquide is faxed or e-mailed to you 48 hours before your scheduled delivery. Just fill it out and fax it back to us.
PACIFICBC Burnaby 604-606-4310BC Castlegar 250-365-2426BC Coquitlam (Dist.) 604-945-9313BC Cranbrook 250-426-5314BC Fort St. John 250-787-2391BC Kamloops 250-374-8864BC Kelowna 250-769-4280BC Langley 604-530-9701BC Nanaimo 250-758-0293BC Prince George 250-562-2638BC Richmond 604-676-3900BC Surrey 604-580-3000BC Terrace 250-635-1606BC Victoria 250-383-3615BC Williams Lake (Dist.) 250-392-6232BC 100 Mile House (Dist.) 250-395-2474
WESTERN CANADAAB Bonnyville 780-826-3152AB Brooks (Dist.) 403-362-5546AB Calgary 310-WELD (9353)AB Camrose (Dist.) 780-672-2452AB Drayton Valley 780-542-4464AB Edmonton (6354 Roper rd) 780-438-5600AB Edmonton (7307 50 st) 310-WELD (9353)AB Edmonton (17811 107 av) 780-483-2050AB Fort McMurray 310-WELD (9353)AB Grande Prairie 310-WELD (9353)AB Lethbridge (Dist.) 403-328-3023AB Lloydminster (Dist.) 780-875-5551
AB Medicine Hat (Dist.) 403-527-8511AB Red Deer 310-WELD (9353)AB Rocky Mountain House 310-WELD (9353)AB Whitecourt 780-778-6778SK Hudson Bay (Dist.) 306-865-2245SK Nipawin (Dist.) 306-862-9858SK North Battleford (Dist.) 306-445-9800SK Prince Albert (Dist.) 306-764-2901SK Regina 306-310-9353SK Saskatoon 306-310-9353MB Brandon 204-728-5050 MB Winnipeg 855-295-WELD (9353)
ONTARIOON Barrie 705-726-3621ON Belleville 613-966-6511ON Bramalea 905-793-2000ON Brantford 519-756-7200ON Burlington (Hub) 905-335-4877ON Cambridge 519-624-4413ON Concord 416-244-1407ON Cornwall (Dist.) 613-938-5710ON Cornwall (Dist.) 613-932-8730ON Gormley (Dist.) 905-841-1840ON Iroquois (Dist.) 613-652-4055ON Kingston 613-384-3665ON London 519-455-3990ON Milton 905-876-0107ON Mississauga 905-564-1433ON Niagara Falls 905-356-6045ON Oshawa 905-576-1860
ON Ottawa 613-225-7550ON Peterborough (Dist.) 705-748-5464ON Renfrew (Dist.) 613-432-3891ON Sarnia (Dist.) 519-383-7022ON Sarnia 519-336-3900ON Sault Ste. Marie 705-254-6445ON Smiths Falls 613-283-3146ON Stoney Creek (Dist.) 905-664-5088ON Sudbury 705-674-7777ON Thunder Bay 807-310-9353ON Timmins 705-267-1158ON Toronto (Dist.) 416-745-1304ON Windsor 519-969-0610
QUEBECQC Alma (Dist.) 418-662-0302QC Amos (Dist.) 819-732-3251QC Boucherville 450-641-6147QC Châteauguay (Dist.) 450-699-3334QC Dolbeau-Mistassini (Dist.) 418-276-0554QC Drummondville 819-478-1809QC Gatineau 819-893-1945QC Granby (Dist.) 450-378-9001QC Havre St-Pierre (Dist.) 418-538-2576QC Joliette (Dist.) 450-756-4444QC Jonquière 418-695-1415QC Laval 450-687-7046QC Marieville (Dist.) 450-460-7255 QC Mont-Laurier (Dist.) 819-623-7555 QC Mont-Laurier (Dist.) 819-585-2277 QC Montréal/Anjou 514-356-7600
QC Notre-Dame-du-Bon-Conseil (Dist.) 819-336-5333 QC Pintendre (Dist.) 418-837-3033QC Rimouski 418-723-6272QC Rouyn-Noranda 819-764-7018QC Sept-Îles 418-962-9713QC Sherbrooke 819-566-4063QC St-Eustache (Dist.) 450-974-1116QC St-Jean-Port-Joli 418-598-3333QC St-Jérôme 450-476-9018QC Thetford Mines (Dist.) 418-335-2989QC Trois-Rivières 819-694-7018QC Val-D’Or 819-874-7018QC Valleyfield (Dist.) 450-373-1792QC Vanier 418-683-1917
ATLANTICNS Dartmouth 902-468-5152NS New Minas (Dist.) 902-681-7082NS New Glasgow 902-755-6441NS Point Tupper (Dist.) 902-625-1876NS Sydney 902-562-5521NB Bathurst (Dist.) 506-546-9834NB Fredericton 506-459-1585NB Grand Falls (Dist.) 506-473-2966NB Moncton 506-857-3280NB Saint John 506-634-8960NL Labrador City (Wabush) 709-944-2864NL Corner Brook 709-639-4202NL Grand Falls-Windsor 709-292-1117NL Mount Pearl 709-758-2765PE Charlottetown (Dist.) 902-368-1208
Promotion sale prices are in effect from 1st to 30th September 2018, at participating locations in Canada only. Air Liquide Canada Inc. reserves the right to: limit quantities, correct any unintentional error that may appear in this flyer’s text or pictures, substitute advertised product by an equivalent product. Our lowest price guarantee applies only to items featured in this flyer and for identical products (same manufacturer, same model and manufacturer part number). Additional charges, such as freight, delivery and material surcharge might apply.
ALEN™, ALMIG™, ALTIG™, BLUESHIELD™, BLUESHIELD CRYSTAL™, BLUESHIELD MNR™, DUO™, EXCELARC™, LA 18 PLUS™, MAPP™, OMNIWELD™, NUCLEAR C™, UNISHIELD™ and WOLFPAC™, in Canada, are registered trademarks of Air Liquide Canada Inc. AIR LIQUIDE™, AIR LIQUIDE WELDING™, ALBEE™, ALIGAL™, ALPHAGAZ™, ALTOP™, ARCAL™, EXELTOP™, FLAMAL™, FLOXAL™ and LASAL™ are registered trademarks of L’Air Liquide S.A. All others names, brands and marks are used for identification purposes only and may be trademarks or registered trademarks of their respective owners.
TUNGSTEN ELECTRODES• Choosing the right tungsten electrodes
and filler metal rods are crucial first steps in successful gas tungsten arc welding (GTAW)
• Length: 178 mm (7”), Ground finish
ELECTRODES
GOUGING ELECTRODES• BLUESHIELD™ gouging carbon electrodes are designed
especially for the air carbon-arc metal removal process.• DCCC POINTED • Length: 305 mm (12”)• 50/PKG
• Brazing • Heating• Welding
• Arts and Craft• Ornamental work
• TIG/MIG • Construction industry
• Auto repairs• Mechanics
• HVAC Equipment
maintenance• Leak tests
• Yearly checks
MAKE YOUR LIFE EASY WITH
A0273866 4.8 mm (3/16”) $15A0273867 6.4 mm (1/4”) $17A0273868 7.9 mm (5/16”) $18A0273869 9.5 mm (3/8”) $20
A0403408 1.0 mm (0.040”) 10/pkg $18.50A0403409 1.6 mm (1/16”) 10/pkg $23.50A0403410 1.6 mm (1/16”) 3/pkg $15.50A0403411 2.4 mm (3/32”) 10/pkg $42.50A0403412 2.4 mm (3/32”) 3/pkg $18.50A0403413 3.2 mm (1/8”) 10/pkg $79.50A0403414 3.2 mm (1/8”) 3/pkg $32.50A0403415 4.0 mm (5/32”) 10/pkg $136.50
AL’S TIPS!
TUNGSTEN ELECTRODES
Air Liquide recommends the use of E3 Electrodes for the following reasons:• Best choice to replace thoriated electrodes
• Longer life
• Non-radioactive additives
• Can be used in both DC & AC processes
• Stable tip and arc geometry
• Every electrode is Eddy Current tested for defects.
AL’S TIPS!
With our Albee™ range of portable, rental-free gas cylinders, Air Liquide can help you work faster with more mobility and achieve better results.
SAFERFully protected valveand regulator.
EASY TO BUYPay and pick-up your cylinder through a network of resellers.
EASY TO USEEasy set-up with the graduated handwheel.
EASY TO EXCHANGEJust exchange it and only pay for the gas consumed.
Oxygen Acetylene Argon Argon Mix Nitrogen
ALBEE™ FLAME ALBEE™ WELD ALBEE™ COOL
Prices in effect from September 1st to 30th 2018
Air Liquide will match advertised prices from the competition for all items identical to those featured in this flyer. Some products in this flyer might not be available at all locations. Please contact us for details.
1-800-817-7697 310-WELD (9353) (ON, AB, SK)
BLUESHIELD.CAAIRLIQUIDE.CA find us @ m.airliquide.ca
DISCOVER OUR NEW BLUESHIELD™ OUTFIT
NEW
BLUESHIELD™ PROMO | SEPTEMBER 2018
THE TRUE FORCE IN WELDING™
Cylinder Gases
Abrasives
Safety Products
Electrodes
AL’S TIPS!
FIND OUT MORE ABOUT AL’S TIPS:
• FLASHBACK ARRESTORS
• OVER-WELDING
• GRINDING
• ALBEE™ CYLINDERS RANGE
• E3 ELECTRODES
ALBEEKIT
AIR LIQUIDE LOCATIONS
5EASY WAYSTO REACH US
ANYWHERE, any time
Online Shop 24/7 at my.airliquide.ca
Visit usFind us at m.airliquide.ca
Call us 310-WELD (9353) 1-800-817-7697 (QC & MB)
E-mail us [email protected] [email protected] [email protected] [email protected] [email protected]
Fax backA pre-filled order form listing the cylinder gases you regularly purchase from Air Liquide is faxed or e-mailed to you 48 hours before your scheduled delivery. Just fill it out and fax it back to us.
PACIFICBC Burnaby 604-606-4310BC Castlegar 250-365-2426BC Coquitlam (Dist.) 604-945-9313BC Cranbrook 250-426-5314BC Fort St. John 250-787-2391BC Kamloops 250-374-8864BC Kelowna 250-769-4280BC Langley 604-530-9701BC Nanaimo 250-758-0293BC Prince George 250-562-2638BC Richmond 604-676-3900BC Surrey 604-580-3000BC Terrace 250-635-1606BC Victoria 250-383-3615BC Williams Lake (Dist.) 250-392-6232BC 100 Mile House (Dist.) 250-395-2474
WESTERN CANADAAB Bonnyville 780-826-3152AB Brooks (Dist.) 403-362-5546AB Calgary 310-WELD (9353)AB Camrose (Dist.) 780-672-2452AB Drayton Valley 780-542-4464AB Edmonton (6354 Roper rd) 780-438-5600AB Edmonton (7307 50 st) 310-WELD (9353)AB Edmonton (17811 107 av) 780-483-2050AB Fort McMurray 310-WELD (9353)AB Grande Prairie 310-WELD (9353)AB Lethbridge (Dist.) 403-328-3023AB Lloydminster (Dist.) 780-875-5551
AB Medicine Hat (Dist.) 403-527-8511AB Red Deer 310-WELD (9353)AB Rocky Mountain House 310-WELD (9353)AB Whitecourt 780-778-6778SK Hudson Bay (Dist.) 306-865-2245SK Nipawin (Dist.) 306-862-9858SK North Battleford (Dist.) 306-445-9800SK Prince Albert (Dist.) 306-764-2901SK Regina 306-310-9353SK Saskatoon 306-310-9353MB Brandon 204-728-5050 MB Winnipeg 855-295-WELD (9353)
ONTARIOON Barrie 705-726-3621ON Belleville 613-966-6511ON Bramalea 905-793-2000ON Brantford 519-756-7200ON Burlington (Hub) 905-335-4877ON Cambridge 519-624-4413ON Concord 416-244-1407ON Cornwall (Dist.) 613-938-5710ON Cornwall (Dist.) 613-932-8730ON Gormley (Dist.) 905-841-1840ON Iroquois (Dist.) 613-652-4055ON Kingston 613-384-3665ON London 519-455-3990ON Milton 905-876-0107ON Mississauga 905-564-1433ON Niagara Falls 905-356-6045ON Oshawa 905-576-1860
ON Ottawa 613-225-7550ON Peterborough (Dist.) 705-748-5464ON Renfrew (Dist.) 613-432-3891ON Sarnia (Dist.) 519-383-7022ON Sarnia 519-336-3900ON Sault Ste. Marie 705-254-6445ON Smiths Falls 613-283-3146ON Stoney Creek (Dist.) 905-664-5088ON Sudbury 705-674-7777ON Thunder Bay 807-310-9353ON Timmins 705-267-1158ON Toronto (Dist.) 416-745-1304ON Windsor 519-969-0610
QUEBECQC Alma (Dist.) 418-662-0302QC Amos (Dist.) 819-732-3251QC Boucherville 450-641-6147QC Châteauguay (Dist.) 450-699-3334QC Dolbeau-Mistassini (Dist.) 418-276-0554QC Drummondville 819-478-1809QC Gatineau 819-893-1945QC Granby (Dist.) 450-378-9001QC Havre St-Pierre (Dist.) 418-538-2576QC Joliette (Dist.) 450-756-4444QC Jonquière 418-695-1415QC Laval 450-687-7046QC Marieville (Dist.) 450-460-7255 QC Mont-Laurier (Dist.) 819-623-7555 QC Mont-Laurier (Dist.) 819-585-2277 QC Montréal/Anjou 514-356-7600
QC Notre-Dame-du-Bon-Conseil (Dist.) 819-336-5333 QC Pintendre (Dist.) 418-837-3033QC Rimouski 418-723-6272QC Rouyn-Noranda 819-764-7018QC Sept-Îles 418-962-9713QC Sherbrooke 819-566-4063QC St-Eustache (Dist.) 450-974-1116QC St-Jean-Port-Joli 418-598-3333QC St-Jérôme 450-476-9018QC Thetford Mines (Dist.) 418-335-2989QC Trois-Rivières 819-694-7018QC Val-D’Or 819-874-7018QC Valleyfield (Dist.) 450-373-1792QC Vanier 418-683-1917
ATLANTICNS Dartmouth 902-468-5152NS New Minas (Dist.) 902-681-7082NS New Glasgow 902-755-6441NS Point Tupper (Dist.) 902-625-1876NS Sydney 902-562-5521NB Bathurst (Dist.) 506-546-9834NB Fredericton 506-459-1585NB Grand Falls (Dist.) 506-473-2966NB Moncton 506-857-3280NB Saint John 506-634-8960NL Labrador City (Wabush) 709-944-2864NL Corner Brook 709-639-4202NL Grand Falls-Windsor 709-292-1117NL Mount Pearl 709-758-2765PE Charlottetown (Dist.) 902-368-1208
Promotion sale prices are in effect from 1st to 30th September 2018, at participating locations in Canada only. Air Liquide Canada Inc. reserves the right to: limit quantities, correct any unintentional error that may appear in this flyer’s text or pictures, substitute advertised product by an equivalent product. Our lowest price guarantee applies only to items featured in this flyer and for identical products (same manufacturer, same model and manufacturer part number). Additional charges, such as freight, delivery and material surcharge might apply.
ALEN™, ALMIG™, ALTIG™, BLUESHIELD™, BLUESHIELD CRYSTAL™, BLUESHIELD MNR™, DUO™, EXCELARC™, LA 18 PLUS™, MAPP™, OMNIWELD™, NUCLEAR C™, UNISHIELD™ and WOLFPAC™, in Canada, are registered trademarks of Air Liquide Canada Inc. AIR LIQUIDE™, AIR LIQUIDE WELDING™, ALBEE™, ALIGAL™, ALPHAGAZ™, ALTOP™, ARCAL™, EXELTOP™, FLAMAL™, FLOXAL™ and LASAL™ are registered trademarks of L’Air Liquide S.A. All others names, brands and marks are used for identification purposes only and may be trademarks or registered trademarks of their respective owners.
TUNGSTEN ELECTRODES• Choosing the right tungsten electrodes
and filler metal rods are crucial first steps in successful gas tungsten arc welding (GTAW)
• Length: 178 mm (7”), Ground finish
ELECTRODES
GOUGING ELECTRODES• BLUESHIELD™ gouging carbon electrodes are designed
especially for the air carbon-arc metal removal process.• DCCC POINTED • Length: 305 mm (12”)• 50/PKG
• Brazing • Heating• Welding
• Arts and Craft• Ornamental work
• TIG/MIG • Construction industry
• Auto repairs• Mechanics
• HVAC Equipment
maintenance• Leak tests
• Yearly checks
MAKE YOUR LIFE EASY WITH
A0273866 4.8 mm (3/16”) $15A0273867 6.4 mm (1/4”) $17A0273868 7.9 mm (5/16”) $18A0273869 9.5 mm (3/8”) $20
A0403408 1.0 mm (0.040”) 10/pkg $18.50A0403409 1.6 mm (1/16”) 10/pkg $23.50A0403410 1.6 mm (1/16”) 3/pkg $15.50A0403411 2.4 mm (3/32”) 10/pkg $42.50A0403412 2.4 mm (3/32”) 3/pkg $18.50A0403413 3.2 mm (1/8”) 10/pkg $79.50A0403414 3.2 mm (1/8”) 3/pkg $32.50A0403415 4.0 mm (5/32”) 10/pkg $136.50
AL’S TIPS!
TUNGSTEN ELECTRODES
Air Liquide recommends the use of E3 Electrodes for the following reasons:• Best choice to replace thoriated electrodes
• Longer life
• Non-radioactive additives
• Can be used in both DC & AC processes
• Stable tip and arc geometry
• Every electrode is Eddy Current tested for defects.
AL’S TIPS!
With our Albee™ range of portable, rental-free gas cylinders, Air Liquide can help you work faster with more mobility and achieve better results.
SAFERFully protected valveand regulator.
EASY TO BUYPay and pick-up your cylinder through a network of resellers.
EASY TO USEEasy set-up with the graduated handwheel.
EASY TO EXCHANGEJust exchange it and only pay for the gas consumed.
Oxygen Acetylene Argon Argon Mix Nitrogen
ALBEE™ FLAME ALBEE™ WELD ALBEE™ COOL
Prices in effect from September 1st to 30th 2018
Air Liquide will match advertised prices from the competition for all items identical to those featured in this flyer. Some products in this flyer might not be available at all locations. Please contact us for details.
1-800-817-7697 310-WELD (9353) (ON, AB, SK)
BLUESHIELD.CAAIRLIQUIDE.CA find us @ m.airliquide.ca
DISCOVER OUR NEW BLUESHIELD™ OUTFIT
NEW
BLUESHIELD™ PROMO | SEPTEMBER 2018
THE TRUE FORCE IN WELDING™
Cylinder Gases
Abrasives
Safety Products
Electrodes
AL’S TIPS!
FIND OUT MORE ABOUT AL’S TIPS:
• FLASHBACK ARRESTORS
• OVER-WELDING
• GRINDING
• ALBEE™ CYLINDERS RANGE
• E3 ELECTRODES
ALBEEKIT