SprinklerSenseThe next generation of sprinkler

monitoring and maintenance

What is SprinklerSense?

SprinklerSense is a newly developed intelligent water flow switch feauturing new technology to enable a sprinkler system’s status to be constantly monitored, tested and recorded to far greater depths than traditional methods. SprinklerSense uses solid state sensors with no moving parts to greatly reduce the time taken to test and commission a system.

Key FeaturesSprinklerSense features enable businesses to protect their assets with the next generation of sprinkler monitoring and maintenance technology.

// Diagnostic InformationEnhanced diagnostics that ensure the sprinkler system functionality is continuously monitored for key indicators:

• Flow alarm detection – water flow in the system.• Dry pipe detection – an empty or partially filled

system.• Senor self-check detection – scale build up or debris

around the senor which could prevent an alarm.• Freeze risk detection – low water temperature.• Leak detection – a low discharge of water continually

over a period of time.• Battery low alarm – a supply fault.• No unit comms – when communication failure.

// Monitoring The SprinklerSense unit offers precise reporting and a full audit trail for management purposes, all reporting can be downloaded using a USB.

// Testing With SprinklerSense, it is no longer necessary to have engineers working at height testing sprinkler systems and water levels. Testing can be completed on demand, using a single button from a local interface unit at ground level.

// Hardware and InstallationSprinklerSense is a compact and lightweight solution weighing only 0.8kg. It is made from stainless steel which makes this solution harder wearing against corrosion and other elements. SprinklerSense can be installed into a single hole or an existing flow switch hole reducing time, cost and leakage potential during the installation. SprinklerSense is approved for water pressure of up to 20 Bar.

// Industry Approvals The unit is Loss Prevention Certificate Board (LPCB) approved and meets BS EN12259-5 standards.

Business Benefits Smarter ways to protect your business

// Improved Hardware Reliability SprinklerSense uses solid state technology that has no moving parts, as a result the risk of hardware failure often caused by water leaks and frost damage is greatly reduced.

// Cost SavingsDue to early problem detection and notification, users are alerted to faults and leaks before they develop into major issues that would result in expensive repairs. Faults can usually be rectified with minimal business disruption.

// Health and SafetyThe remote functionality allows engineers easy access to the system so that there is no longer the need for working at height. This reduces the potential for health and safety risks on site.

// Minimal Business DisruptionThe potential for water leaks during the testing phase is now completely removed, as well as the complex and time consuming logistical process required to access and test water flow associated with traditional methods. This can now be done with the simple press of a button reducing the time taken by the service engineer being on site by up to 50%.

Tyco Fire Suppression // SprinklerSense Solutions

Why SprinklerSense?

Choosing SprinklerSense can provide you with true benefits compared to traditional methods of sprinkler system testing.

// Zoned SystemsZoned systems, traditionally found in larger sites such as shopping centres and all life safety environments, need to carry out testing after hours as a larger work area is required for the discharge of water during testing. This can prove difficult and costly for businesses. SprinklerSense’s intelligent technology allows for remote testing from the ground directly, meaning work can be completed during working hours with minimal disruption.

// Flow SwitchesUnlike the flow switches which are mechanical in nature and require the movement of large volumes of water during testing, SprinklerSense uses solid state technology sensors. These sensors remove the need to force water flow whilst still ensuring effective testing and recordings.

// PumpsConventional flow switch testing developed over the last 15 years has used pumps to circulate the water around a smaller circuit to test water flow. The use of pumps, pipes and the need for drainage can lead to leaks. SprinklerSense monitors flow without needing to physically move the water and also tests temperature, and water presence constantly.

Function SprinklerSense Traditional Methods

Continuous self checking ✓ ✗

On demand switch testing ✓ ✗

Single button multiple testing from switch panel ✓ ✗

Water run off ✗ ✓

Running of pumps for testing ✗ ✓

Event history log ✓ ✗

USB records (to laptop) ✓ ✗

Flow display when inspectors valve open ✓ ✗

Freeze risk detection ✓ ✗

Dry pipe detection ✓ ✗

Leak detection ✓ ✗

Remote delay setting ✓ ✗

No moving parts ✓ ✗

Maintenance free ✓ ✗

Stainless steel parts ✓ ✗

Low voltage wiring to switch ✓ ✓

Additional relays available ✓ ✗

Applications Shopping Centres and Retail UnitsHigh-rise BuildingsOfficesWarehousesDistribution CentresStorage FacilitiesIndustrial and Engineering SitesArchiving

Tyco Fire Suppression // Product Innovation

ADTADT Fire and Security plc +44 (0) 800 132 200www.adt.co.uk

TISTyco Integrated Systems & Spector Lumenex +44 (0) 1954 784 000www.tycoisys.com

FCFFirst Choice Facilities+44 (0) 844 856 4700www.fcfplc.co.uk

TFISTyco Fire & Integrated Solutions +44 (0) 161 455 4400www.tycofis.co.uk

FCCFirst City Care+44 (0) 1707 364 800www.firstcitycare.co.uk

Global Strength. Local Expertise.At your service.Offering local support, integrated across the UK and Ireland

A Tyco Business

Tyco102 / Issue 02 / February 2015© 2015 Tyco I&S UK. The right is reserved to modify or withdraw any product or service without notice.