u3 launchpad updater installation manual u2h
TRANSCRIPT
USB Flash Memory
TransMemory™
U2H-512MT U2H-001GT U2H-002GT U2H-004GT
U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory
Semiconductor Company, Toshiba Corporation
U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory
1
Table of Contents Chapter 1 Getting started ................................................................................. 2 Chapter 2 System requirements....................................................................... 3 Chapter 3 Installing the Updater....................................................................... 4
1. Installing the Updater....................................................................... 4
1.1. Installing the Updater with Security disabled .......................... 4
1.2. Installing the Updater with Security enabled......................... 11
Chapter 4 Launchpad Tour instructions after installing Updater..................... 20
1. Launchpad Tour instructions.......................................................... 20
1.1. Launchpad Tour instructions on Windows Vista™ ............... 20
1.2. Launchpad Tour instructions on Windows® 2000/XP .......... 22
U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory
2
Chapter 1 Getting started Thank you for purchasing USB Flash Memory (TransMemory™). This product has the following features. • This USB Flash Memory uses Toshiba NAND Flash Memory technology. It
can be used in a PC as a removable disk. • It is powered by a USB port bus, so no AC adapter is required. * With the exception of use for one’s personal enjoyment and the like, according
to the Copyright Law of Japan, content that you record cannot be used without permission from the holder of the appropriate rights.
* While writing data to or reading data from TransMemory™ do not shake or subject to impact, turn off power or remove TransMemory™ from the device. Doing so may cause failure of TransMemory™ or the device that is connected to, or the destruction or loss of data stored in TransMemory™.
This manual provides a brief description of how to install and use the Updater. To ensure proper usage, please read it carefully before using this product. • Windows is a registered trademark of Microsoft Corporation in the United
States and other countries. • Macintosh and MacOS are trademarks of Apple Computer, Inc. • The USB logo is a trademark. • Other company and product names may be trademarks or registered
trademarks of their respective companies.
Trademarks
U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory
3
Chapter 2 System requirements This product requires the following hardware and software in order to function properly.
Hardware compatibility
◊ PC with a USB port that conforms to USB specifications (Operation not guaranteed with homemade or remodeled PCs)
Operating system compatibility
◊ Microsoft® Windows® 2000 Professional Service Pack 4 or higher ◊ Microsoft® Windows® XP Professional ◊ Microsoft® Windows® XP Home Edition ◊ Microsoft® Windows Vista™ Ultimate ◊ Microsoft® Windows Vista™ Enterprise ◊ Microsoft® Windows Vista™ Business ◊ Microsoft® Windows Vista™ Home Premium ◊ Microsoft® Windows Vista™ Home Basic
U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory
4
Chapter 3 Installing the Updater This chapter describes how to install the Updater in order to use this product on Windows Vista™. Install the Updater correctly by following the instructions below.
1. Installing the Updater Make sure to connect this product to your PC before installing the Updater. Exit all other applications. 1.1. Installing the Updater with Security disabled 1) Start up Windows®. 2) Access the webpage for downloading the Updater. 3) Double-click the appropriate file 4) Click "Save" in the dialog box.
U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory
5
5) When the Save As dialog box appears, select "Desktop".
6) The following dialog box will appear when the download is completed. Click
"Close".
U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory
6
7) You will find the new executable file that you downloaded, named
"U3updater_toshiba_U2H_Ver1.055.exe", saved to your Desktop. Double-click this file's icon.
8) The driver installation program will start. The following dialog box will appear,
and then disappear automatically.
U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory
7
When the next dialog box appears, select "Accept" and click "Next".
When the next dialog box appears, click "Next".
U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory
8
When the next dialog box appears, enter a password in the "Password" and "Retype password" fields.
Click "Next".
U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory
9
The following dialog box will appear, and then disappear automatically.
A backup file will be created in a predefined folder.
U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory
10
9) When the following dialog box appears, click "Done". This completes the
installation of the TransMemory™ Updater.
* Re-insert your TransMemory™ into your PC's USB port. This completes the installation of the TransMemory™ Updater. Once the Updater is installed, it can be used simply by connecting your TransMemory™ to your PC's USB port. Once installation is completed, you may delete the TransMemory™ executable file downloaded in Step 7, named "U3updater_toshiba_U2H_Ver1.055.exe".
U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory
11
Once installation is completed, you may also delete the backup file created in Step 8.
1.2. Installing the Updater with Security enabled 1) Start up Windows®. 2) Access the webpage for downloading the Updater. 3) Double-click the appropriate file. 4) Click "Save" in the dialog box.
U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory
12
5) When the Save As dialog box appears, select "Desktop".
6) The following dialog box will appear when the download is completed. Click
"Close".
U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory
13
7) You will find the new executable file that you downloaded, named
"U3updater_toshiba_U2H_Ver1.055.exe", saved to your Desktop. Double-click this file's icon.
8) The driver installation program will start. The following dialog box will appear,
and then disappear automatically.
U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory
14
When the next dialog box appears, select "Accept" and click "Next".
When the next dialog box appears, click "Next".
U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory
15
When the next dialog box appears, enter your password in the "Password" field.
Click "Next".
U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory
16
When the next dialog box appears, enter a password in the "Password" and "Retype password" fields.
Click "Next".
U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory
17
The following dialog box will appear, and then disappear automatically.
A backup file will be created in a predefined folder.
U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory
18
9) When the following dialog box appears, click "Done". This completes the
installation of the TransMemory™ Updater.
* Re-insert your TransMemory™ into your PC's USB port. This completes the installation of the TransMemory™ Updater. Once the Updater is installed, it can be used simply by connecting your TransMemory™ to your PC's USB port. Once installation is completed, you may delete the TransMemory™ executable file downloaded in Step 7, named "U3updater_toshiba_U2H_Ver1.055.exe".
U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory
19
Once installation is completed, you may also delete the backup file created in Step 8.
U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory
20
Chapter 4 Launchpad Tour instructions after installing Updater
This chapter describes instructions regarding the Launchpad Tour program after installing the U3 Launchpad Updater. Perform the procedure correctly by following the instructions below.
1. Launchpad Tour instructions 1.1. Launchpad Tour instructions on Windows Vista™ The current Launchpad Tour does not support Windows Vista™. We recommend that you delete "AutoRun" in Launchpad Tour after performing an update. A version of Launchpad Tour that supports Windows Vista™ is scheduled for release in the summer of 2007. 1) Start Launchpad.
U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory
21
2) Right-click on "Launchpad Tour" and select "Properties".
3) When the next dialog box appears, click "Remove Program".
U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory
22
4) Then click "Yes" in the following dialog box.
Launchpad Tour has now been removed. 1.2. Launchpad Tour instructions on Windows® 2000/XP Launchpad Tour supports Windows® 2000/XP. We recommend that you disable the "AutoRun" in Launchpad Tour after performing an update. 1) Start Launchpad.
U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory
23
2) Right-click on "Launchpad Tour" and select "Properties".
3) When the next dialog box appears, uncheck "Start on Insertion".
U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory
24
4) Click "Close".
Launchpad Tour's "Start on Insertion" option is now disabled.
End of document