ub430-af installationmanual tm en
TRANSCRIPT
Disclaimer
The information contained in this documentation is for reference only. The text, images and
charts of this documentation have been processed with intensive care and we have been
dedicated to ensure the accuracy and completeness. However, the content of this document
is subject to change without notice and no liability nor responsibility is assumed for any loss
or damage arising from any kind of misunderstood, improper uses of the hardware, software,
and documents.
Headquarter
KWorld Computer Co., Ltd.
No. 113, Jian 2nd Road
Jhonghe City, Taipei County 235
Taiwan (R.O.C.)
www.kworld-global.com
Copyright
@ 2010 KWorld Computer Co., Ltd. All rights reserved. All KWorld trademarks and
logos are registered trademarks of KWorld Computer Co., Ltd. All other trademarks
and logos presented in this material are the property of their respective owner.
KWorld Computer Co. Ltd. reserves the right to revise the specifications mentioned
above. No part of this documentation can be copied, reproduced or distributed in any kind
of print or electronic forms without legal permission.
Package Contents
Please check if all the following items are included in the package first. If not, please consult
with the original place where you purchase the products as soon as possible.
USB ISDB‐T hybrid tuner stick (UB 430‐AF)
Mobile Antenna
Quick installation guide
Multi‐cable
Remote control
ArcSoft TotalMedia installation CD
Minimum System Requirement
‧ CPU: Pentium‐IV 2.0 GHz or higher (recommended)
‧ RAM: 512MB or above (1G or higher is recommended)
‧ USB port: one available USB 2.0 port
‧ Graphics Card (Must support Microsoft DirectX 9.0c)
‧ Sound Card (AC97 compatible sound card)
‧ 1GB of Free HD Space
‧ CD‐ROM Drive (For software installation)
‧ Operating system: Microsoft Windows ® XP(SP2)/ XP MCE/ Windows Vista/Windows7
Connecting the Device
1. Plug the cable cord or mobile antenna into the TV connecting end of the USB TV tuner
stick.
Note: Connect the cable for analog TV reception. Plug the digital antenna for digital ISDB‐T
TV access.
2. Insert the USB TV tuner stick into an available USB 2.0 port on your PC or laptop.
Note: Do not plug your USB TV tuner stick into a USB 1.1 port. It will not work.
Installing the software:
The following steps will guide you through the steps for installing the Arcsoft TotalMedia
software.
1. Once you have properly installed the USB TV tuner stick, you will see a dialog box of
“Found New Hardware Wizard”. Just click cancel and get ready to insert the included
KWorld installation CD into your CD‐ROM drive for a more convenient installation of the
software.
2. Please insert the included installation CD
3. The main installation screen will appear. Please select “Multimedia software and driver”
under “Quick Installation”.
4. Please read through the End User License Agreement and then click “Next”.
5. You will be asked to choose either “Typical Installation” or “Custom Installation”. It is
highly recommended that you choose “Typical Installation” as it installs the needed
driver, TotalMedia and other utility programs for you. However, you may tick on
“Custom Installation” if you wish to install the programs individually.
6. The InstallShield Wizard of Total Media will take a short moment to process. Please be
patient.
7. The dialog box of “Welcome to the InstallShield Wizard for TotalMedia” will appear.
Please click “Next” to continue.
8. Please read through the “License Agreement” and then click on “Yes”
9. Please enter the “Customer Information”. You can make up a user name and a company
name and then type in the serial number.
Note: The serial number is the string of codes on the cover of the CD.
10. Please Select a destination folder for installing the TotalMedia. You can click on
“Browse” to browse/choose other destination folders. Then, click on “Next”
11. Installing the TotalMedia will add new program icons to the program folders on the list
of “Existing Folders”. You can enter a new name for the “Program Folders” or select one
from the existing folders. Then click “Next” to continue.
12. The installation may take a while. Please wait.
13. You will see a dialog box informing you “InstallShield Wizard Complete”, which means
the TotalMedia has been successfully installed. Click “Finish” to exit the wizard.
Please keep in mind that you
have to restart the computer
before running the TotalMedia
when you use the software for
the first time.
Activating the TotalMedia 1. To activate the TotalMedia software, please move your mouse cursor to “Start”
”Programs” ”KWorld Multimedia” ”TotalMedia”. or
2. Double‐click on the TotalMedia icon on your desktop.
Remote Control Overview
Remote control buttons and descriptions:
(Power) Turns on/off the Application Program
Source Switch Video Source (TV 1,TV 2)
Zoom Switch viewing modes (Full Screen/ Windows)
Shut Down Shut down the PC.
CH+/CH‐ Switches to the next/previous channel.
VOL‐/VOL+ Decrease / increase the volume.
Numeric Keypad
Keypad for channel selection Switch to the previously selected channel
Enter Stop Stop the playback or recording of the current program.
Rec Record the current program. Mute Turn on/off the Audio.
Play Play or pause the recorded file. Move Up
Move Down Move Left
Move Right F1
(Red key)
Returned to preciously accessed page
F2
(Green key) Sap
F3
(Yellow key) Snapshot
F4
(Blue key) EPG
Attention:
For more detailed uses of the ArcSoft TotalMedia software, which is a third party software
for KWorld, please refer to official ArcSoft TotalMedia user manual.