uclpv2-hopi issues bof joint techs workshop vancouver, bc 2005
TRANSCRIPT
ResearchRutherford
ResearchRutherford
ResearchRutherford
UCLPv2-HOPIIssues BoF
Joint Techs Workshop
Vancouver, BC
2005
Project Network – APN concept
national
ron
metro
campus
national
ron
metro
campus
vlan vlan
node node
lightpath
Project Networks
• Ramp up
•Reserve light paths
•Config metro/campus network
•Config project specific apps
Project Networks - example
9k DDS Project
Enterasys N7
gigE
10,239 bytes
gigE
ONS15454
gigE
Preliminary 9k DDS Project - Target List
gigE
SM 22 km
long range ZX GBICs fromCANARIE -extend loanperiod to cover 9k DDSproject
10/8 VLAN
ZX GBICZX GBIC SONET
10/8 VLAN 10/8 VLAN
dedicatedgigE port
IBM p650 AIX
Routed IPv4 = 206.12.24.15Lightpath IPv4 = 172.31.24.15Reference IPv4 = 10.12.24.15MAC = 00:09:6b:ce:3c:19
devstore.westgrid.ca
7
0
route all 10.0.0.0/8 (10/8)todedicated port of 5 portgigE link aggregator
route all 10.0.0.0/8 (10/8)toone VLAN of 6 on 4 portgigE link aggregator
WestGrid
monitor 10/8 VLAN for leakage orunusual activity of ARP/Broadcast/Multicast
SFU MainEnterasys ER16
64,000 bytesIRMACS
Cisco 6509
9,216 bytes
10/8VLAN
MM
SGIIRMACS
ONYX 4
vizserver.westgrid.caRouted IPv4 = 206.12.24.8Lightpath IPv4 = 172.31.24.8Reference IPv4 = 10.12.24.8MAC = 08:00:69:13:eb:21
gigE
SM
gigE
Molecular Biology and Biochemistry
10/8 VLAN
9k SwitchSummit-1i
Supplied and set up bySFU-WestGrid, reimbursedby 9k DDS Project
Supplied by MBB
9k DDS Phase 1: tap existing lightpath infrastructure9k DDS Phase 2: setup dedicated lightpath infrastructure
9k DDS phase 2reconfigure todedicated gigE portfrom ONS
9k DDS phase 1 tapWestGrid-IRMACS gigE portfrom ONS for setup
note: replace all lightpath 10.NNN.XXX.XXX with172.31.XXX.XXX for DDS phase 1 ... due to 10/8 conflicts at SFU... however keep all 10/8 address for reference alias andpossible switch over to 10/8 for handoff in DDS phase 2 ...notably either can be used interchangeably if no addressspace conlicts are present ... ;-)
ONS15454
STS-24c
max of 2 STS-24c per card and 1 STS-24cper port ... drop lightpath from Calary onone G1000 and light path from Victoria onother G1000 use switch to combine onlink to SFU for collaboration re: DonMcWilliam
SONETgigE Linux
gigE
Dell L39,018 bytes
UofASubatomic Physics lightpath.phys.ualberta.ca
Routed IPv4 = 129.128.241.113Lightpath IPv4 = 172.31.241.113Reference IPv4 = 10.128.241.113MAC = 00:e0:81:24:45:3a
10/8 VLAN
dual port
TRIUMFgigE
campus router
gigE
LinuxgigE
9k SwitchSummit-1i UofA
Biochemistry lightpath.pence.caRouted IPv4 = 129.128.139.2XXLightpath IPv4 = 172.31.139.2XXReference IPv4 = 10.128.139.2XXMAC =
10/8 VLAN
dual port
PENCEgigE
campus router
Supplied byBiochem
Supplied and set up byTRIUMF, reimbursedby 9k DDS Project
gigE
gigE
Cisco 6509
UVicNetwork Services
Linux
phys02.comp.uvic.caRouted IPv4 = 142.104.21.13Lightpath IPv4 = 172.31.21.13Reference IPv4 = 10.104.21.13MAC =
HEPnet
9,216 bytes
10/8 VLAN
campus router
dual port
Supplied byBiochem
gigE
gigE
UVicBiochemistry & Microbiology
Linux
lightpath.bioc.uvic.caRouted IPv4 = 142.104.33.XXXLightpath IPv4 = 172.31.33.XXXReference IPv4 = 10.104.33.XXXMAC =
TVBR
10/8 VLAN
campus router
dual port
9k SwitchSummit-1i
Supplied and set up byHEPnet, reimbursed by9k DDS Project
9k DDS phase 2reconfigure todedicated gigE portfrom ONS
9k DDS phase 2reconfigure todedicated gigE portfrom ONS 9k DDS phase 1 tap
TRIUMF gigE portfrom ONS for setup
9k DDS phase 1 tap HEPnetgigE port from ONS for setup
CANARIENETERA
CALGARY
ONS15454
STS-24c
9k SwitchSummit-5i
STS-24cSONET
CANARIEBCNET
VICTORIA
SX GBICs
CANARIEBCNET
VANCOUVER
ONS15454CANARIENETERA
EDMONTON
Cisco 3750
9,216 bytes
GT CO-LO
CWDM supplied and set upby BCNET, reimbursed by9k DDS Project
GT CO-LOCWDM
BCNET TXCWDM
SX GBICs SX GBICs
BioScienceCWDM
Netera TXCWDM
SXGBICs
9k SwitchSummit-1i
UofC
Linux
lightpath.mbb.sfu.caRouted IPv4 = 142.58.213.XXXLightpath IPv4 = 172.31.213.XXXReference IPv4 = 10.58.213.XXXMAC =
MBB
campus router
dual port
campus router
BioScience
dual portLinux
UofC
dual G1000 ports forcollaboration SX GBICssupplied by BCNET re:Don McWilliam
Supplied and set up byNetera, reimbursed by9k DDS Project
CWDM supplied byNetera re: Gary Finley
Supplied byBioScience
Dove tail ONS G1000 portsvia VLAN re: Gary Finley
Lightpaths from Edmontonand Vancouver drop on twoONS G1000 ports re: GaryFinley
9k DDS phase 1split lightpathsfrom ONS for setup
Supplied and set up byBCNET, reimbursed by9k DDS Project
SXGBICs
SXGBICsNetera TX
CWDM
LX GBICs
Fibre in place ... ?
Fibre in place ... ?
Fibre in place ... ?
BCNET TX
lightpath.bioscience.ucalgary.caRouted IPv4 = 136.159.XXX.XXXLightpath IPv4 = 172.31.XXX.XXXReference IPv4 = 10.159.XXX.XXXMAC =
blowfish.westgrid.caRouted IPv4 = 206.12.24.6Lightpath IPv4 = 172.31.24.6Reference IPv4 = 10.12.24.6MAC = 00:09:6b:f1:f4:85
Routed IPv4 = 206.12.24.65Lightpath IPv4 = 172.31.24.65Reference IPv4 = 10.12.24.65MAC =
gridstore.westgrid.ca
Project Network – some issues
• ONS to campus & cross campus fiber
• Black Hole (unrouted) IPv4 – ARP
Leakage – 10.XXX.XXX.XXX conflicts
• VLAN – Configuration – Layer 2 sniffing
• Mystery behavior – protocol & MTU
specific drops
Project Network – user APN control ?OS Window Fcts
Status: Connected to http://uclp.canet4.net
TRIUMF
File Edit View Tools Window HelpV2
ONS OME APN
TRIUMFAPNs
ons-nyc01-enet_2/4
ons-van02-enet_2/2
10.168.1.1
10.168.1.2
APN-2
VLAN-1
VLAN-1
APN-1
APN-2
APN-1
CERN-1
CERN-1
APN-1
APN-1 APN-2
APN-2
OXC Wizard-1
SURFnet-CERN
10.168.1.1 10.168.1.2
VLAN-1
ons-van02-enet_2/2 ons-nyc01-enet_2/4
APN-1CERN-1 CERN-1APN-2
OS Window Fcts
Status: Connected to http://uclp.canet4.net
TRIUMF
File Edit View Tools Window HelpV2
ONS OME APN
TRIUMFAPNs
ons-nyc01-enet_2/4
ons-van02-enet_2/2
10.168.1.1
10.168.1.2
APN-2
VLAN-1
VLAN-1
APN-1
APN-2
APN-1
CERN-1
CERN-1
APN-1
APN-1 APN-2
APN-2
OXC Wizard-1
SURFnet-CERN
10.168.1.1 10.168.1.2
VLAN-1
ons-van02-enet_2/2 ons-nyc01-enet_2/4
APN-1CERN-1 CERN-1APN-2
Project Networks
• Core Competency Tasks
•project specific apps
•work flow (transfer/process)
•visualization
•distributed file systems
Project Network – some issues
• APN representations
•import/export/reserve ?
• work flow (grid) model
•explicit APN representation ?
•Task_1(use APN CERN-1)
TRIUMFAPNs
OS Window Fcts
Status: Connected to http://uclp.canet4.net
ONS OME APN
TRIUMF
New >
Open...
Close
Save
Save as ...
APN Diagram
ONS Diagram
OME Diagram
ADM Diagram
Exit
Edit View Tools Window HelpV2 File
Left click File – mouse over – select New – mouse over – select – APN Diagram – left click
Assume Logged on as TRIUMF - New APN Diagram
Key new APN name in highlight – hit enter – renames from – New APN – CERN-1 – creates blank CERN-1 APN diagram
Create APN tree
OS Window Fcts
Status: Connected to http://uclp.canet4.net
CERN-1
TRIUMF
File Edit View Tools Window HelpV2
ONS OME APN
CERN-1 CERN-1
CERN-1
TRIUMFAPNs
CERN-1 CERN-1
OS Window Fcts
Status: Connected to http://uclp.canet4.net
CERN-1
TRIUMF
File Edit View Tools Window HelpV2
ONS OME APN
TRIUMFAPNs
New >
Copy
Paste
Delete
Import ...
Interface
Node
Link
Resource
Export...
Refresh
Tools >
Properties
CERN-1
Right click in blank APN diagram CERN-1 – mouse over – select New – mouse over – select – Interface - left click – creates – New Interface – at location in diagram – and under CERN-1 – APN map tree
Add new TRIUMF Interface
OS Window Fcts
Status: Connected to http://uclp.canet4.net
CERN-1
Alpha Layout
File Edit View Tools Window HelpV2
ONS OME APN
TRIUMFAPNs
Interface-1
CERN-1
Interface-1
CERN-1 CERN-1
Select New Interface in tree - right click - select – Properties – from popup menu
Select Interface Properties – per Gary Finley mods
New >
Copy
Paste
Delete
Import ...
Export...
Rename
Tools >
Properties
Select Location Property Value select icon - left click – select Vancouver
Set Interface Location Property – modified: rename eliminated – location property added – Gary Finley
OS Window Fcts
Status: Connected to http://uclp.canet4.net
CERN-1
Alpha Layout
File Edit View Tools Window HelpV2
ONS OME APN
TRIUMFAPNs
Interface-1
CERN-1
Interface-1
CERN-1 CERN-1
Interface-1Interface
NameTypeLocation
ether-1000
IPv4MAC
nonenonenone
OS Window Fcts
Status: Connected to http://uclp.canet4.net
CERN-1
Alpha Layout
File Edit View Tools Window HelpV2
ONS OME APN
TRIUMFAPNs
10.198.1.1
CERN-1
10.198.1.1
CERN-1 CERN-1
10.198.1.1Interface
NameTypeLocation
ether-1000
IPv4MAC
Vancouver10.198.1.1none
Select Location Property Value select drop down icon - left click – select Vancouver – IPv4 algorithm cuts in and autogenerates 10.198.1.1 from /2X – also sets Name = IPv4(value)
Set Interface Location Property autogenerates unrouted black hole IPv4 from pre-assigned range for logon TRIUMF updates config so used IPv4 from range not available –– Gary Finley
Find a local gigapop TRIUMF MAN gigE (green) interface in the ONS tree – left click – hold – drag – release on CERN-1 APN diagram
Find TRIUMF ONS MAN interface drag into APN
OS Window Fcts
Status: Connected to http://uclp.canet4.net
CERN-1
TRIUMF
File Edit View Tools Window HelpV2
ONS OME APN
canet4
ons-vic01
ons-van02
ons-cal01
oxc
wan
man
ons-van01
enet_2/1
enet_2/2
enet_2/3
enet_2/4
enet_3/1
enet_3/2
enet_3/3
enet_3/4
enet_4/1
enet_4/2
enet_4/3
enet_4/4
CERN-1 CERN-1
10.168.1.1 ons-van02-enet_2/2
manual select
Scroll down to NYC01 find SURFnet MAN gigE (green) interface in the ONS tree – left click – hold – drag – release on CERN-1 APN diagram
Find SURFnet ONS MAN interface drag into APN
OS Window Fcts
Status: Connected to http://uclp.canet4.net
CERN-1
TRIUMF
File Edit View Tools Window HelpV2
ONS OME APN
ons-ott01
ons-nyc01
oxc
wan
man
ons-mon01
enet_2/1
enet_2/2
enet_2/3
enet_2/4
enet_3/1
enet_3/2
enet_3/3
enet_3/4
enet_4/1
enet_4/2
enet_4/3
enet_4/4
ons-tor01
ons-fre01
CERN-1 CERN-1
10.168.1.1 ons-van02-enet_2/2 ons-nyc01-enet_2/4
manual select
Right click in blank APN diagram CERN-1 – mouse over – select New – mouse over – select – Interface - left click – creates – New Interface – at location in diagram – and under CERN-1 – APN map tree – properties location select – CERN – autogenerates IPv4 - 10.168.1.2
Add new CERN interface –Gary Finley – to eliminate manual select of intermediate ONS G1000 interfaces
OS Window Fcts
Status: Connected to http://uclp.canet4.net
CERN-1
Alpha Layout
File Edit View Tools Window HelpV2
ONS OME APN
TRIUMFAPNs
10.198.1.1
CERN-1
CERN-1 CERN-1
10.198.1.2Interface
NameTypeLocation
ether-1000
IPv4MAC
CERN10.198.1.2none
10.198.1.1 10.198.1.210.198.1.2
OS Window Fcts
Status: Connected to http://uclp.canet4.net
CERN-1
Alpha Layout
File Edit View Tools Window HelpV2
ONS OME APN
TRIUMFAPNs
10.198.1.1
CERN-1
CERN-1 CERN-1
10.198.1.2Interface
NameTypeLocation
ether-1000
IPv4MAC
CERN10.198.1.2none
10.198.1.1 10.198.1.210.198.1.2
Select then right click – 10.198.1.2 IF in tree model – mouse down – select Tools – select ONS IF Wizard … - left click
Add available ONS IF using wizard – mod Gary Finley – to eliminate manual select of intermediate ONS G1000 interfaces
New >
Copy
Paste
Delete
Import ...
Export...
Rename
Tools >
PropertiesOXC Wizard...
ONS IF Wizard...
OS Window Fcts
Status: Connected to http://uclp.canet4.net
CERN-1
Alpha Layout
File Edit View Tools Window HelpV2
ONS OME APN
TRIUMFAPNs
10.198.1.1
CERN-1
CERN-1 CERN-1
10.198.1.2Interface
NameTypeLocation
ether-1000
IPv4MAC
CERN10.198.1.2none
10.198.1.1 10.198.1.210.198.1.2
Select ons-nyc01-enet_2/4 left click available ONS IF – left click Add button – repeat - select – ons-nyc01-enet_2/4 – left click Add – left click Close button
Add available ONS IF using wizard – mod Gary Finley – to eliminate manual select of intermediate ONS G1000 interfaces
ONS IF Wizard
Add Close
Available ONS IF
ons-nyc01-enet_2/4
wizard select
OS Window Fcts
Status: Connected to http://uclp.canet4.net
CERN-1
Alpha Layout
File Edit View Tools Window HelpV2
ONS OME APN
TRIUMFAPNs
10.198.1.1
CERN-1
CERN-1 CERN-1
InterfaceNameTypeLocation
ether-1000
IPv4MAC
Vancouver10.198.1.1none
10.198.1.1 10.198.1.2
10.198.1.2
ons-nyc01-enet_2/4 ons-nyc01-enet_2/4
10.198.1.1
Select left click IF 10.198.1.1 – repeat – popup menu – ONS IF Wizard - select ons-van01-enet_2/4 left click available ONS IF – left click Add button – repeat - select – ons-nyc01-enet_2/4 – left click Add – left click Close button
Add available ONS IF using wizard – mod Gary Finley – to eliminate manual select of intermediate ONS G1000 interfaces
ONS IF Wizard
Add Close
Available ONS IF
ons-van02-enet_2/2
wizard select
OS Window Fcts
Status: Connected to http://uclp.canet4.net
CERN-1
TRIUMF
File Edit View Tools Window HelpV2
ONS OME APN
TRIUMFAPNs
10.168.1.1
10.168.1.2
CERN-1 CERN-110.168.1.1 10.168.1.2ons-van02-enet_2/2 ons-nyc01-enet_2/4
CERN-1
ons-van02-enet_2/2
ons-nyc01-enet_2/4
Select left click property close tab – select left click palette open tab
Close property sub window – expand palette
Left click on palette expand tab – click Link header to expand – click drag VLAN link – drop near 10.168.1.1 – click hold VLAN left end clip to right point of interface – end handle should turn green if ok – repeat drag drop connect for APN-1 link and APN-2 link – double click on APN-1 link to edit new APN-1 diagram…
Expand Palette select drag VLAN and APN links clip to interfaces
Interface
Link
Node
Resource
VLAN
WAN
APN
OS Window Fcts
Status: Connected to http://uclp.canet4.net
TRIUMF
File Edit View Tools Window HelpV2
ONS OME APN
TRIUMFAPNs
ons-nyc01-enet_2/4
ons-van02-enet_2/2
10.168.1.1
10.168.1.2
VLAN-2
VLAN-1
VLAN-1
APN-1
VLAN-2
APN-1
CERN-1
CERN-1
APN-1
10.168.1.1 10.168.1.2
VLAN-1
ons-van02-enet_2/2 ons-nyc01-enet_2/4
APN-1
APN-1 APN-2
APN-2
CERN-1 CERN-1APN-2
Left click on Resource Palette to expand – left click – hold – drag – OXC Wizard to APN-1 diagram – connect OXC Wizard end points to both APN-1 terminus – instantiates with default instance name of OXC Wizard-1
APN-1 install OXC Wizard
Interface
Link
Node
Resource
OS Window Fcts
Status: Connected to http://uclp.canet4.net
TRIUMF
File Edit View Tools Window HelpV2
ONS OME APN
TRIUMFAPNs
CERN-1 APN-1 APN-2
APN-1 APN-1OXC Wizard-1
OXC Wizard
ons-nyc01-enet_2/4
ons-van02-enet_2/2
10.168.1.1
10.168.1.2
APN-2
VLAN-1
VLAN-1
APN-1
APN-2
APN-1
CERN-1
APN-1
APN-2
OXC Wizard-1
Interface
Link
Node
Resource
OS Window Fcts
Status: Connected to http://uclp.canet4.net
TRIUMF
File Edit View Tools Window HelpV2
ONS OME APN
TRIUMFAPNs
CERN-1 APN-1 APN-2
APN-1 APN-1OXC Wizard-1
OXC Wizard
ons-nyc01-enet_2/4
ons-van02-enet_2/2
10.168.1.1
10.168.1.2
APN-2
VLAN-1
VLAN-1
APN-1
APN-2
APN-1
CERN-1
APN-1
APN-2
OXC Wizard-1
Once connected to APN-1 terminus double click on OXC Wizard-1 to start process …
APN-1 invoke OXC Wizard
Interface
Link
Node
Resource
OS Window Fcts
Status: Connected to http://uclp.canet4.net
TRIUMF
File Edit View Tools Window HelpV2
ONS OME APN
TRIUMFAPNs
CERN-1 APN-1 APN-2
APN-1 APN-1OXC Wizard-1
OXC Wizard
ons-nyc01-enet_2/4
ons-van02-enet_2/2
10.168.1.1
10.168.1.2
APN-2
VLAN-1
VLAN-1
APN-1
APN-2
APN-1
CERN-1
APN-1
APN-2
OXC Wizard-1
While OXC Wizard-1 is working – left click APN-2 diagram
Edit APN-2
Left click select APN-2 terminus – right click – mouse down – left click select Import …
Import existing APN
New >
Copy
Paste
Delete
Import ...
Export...
Rename
Tools >
Properties
Interface
Link
Node
Resource
OS Window Fcts
Status: Connected to http://uclp.canet4.net
TRIUMF
File Edit View Tools Window HelpV2
ONS OME APN
TRIUMFAPNs
CERN-1 APN-1 APN-2
APN-2 APN-2
OXC Wizard
ons-nyc01-enet_2/4
ons-van02-enet_2/2
10.168.1.1
10.168.1.2
APN-2
VLAN-1
VLAN-1
APN-1
APN-2
APN-1
CERN-1
APN-1
APN-2
OXC Wizard-1
Select - left click - SURFnet-CERN in Import dialogue – click ok button
Select SURFnet-CERN APN
Import APN
OK Cancel
External APNs
SURFnet-CERN
Interface
Link
Node
Resource
OS Window Fcts
Status: Connected to http://uclp.canet4.net
TRIUMF
File Edit View Tools Window HelpV2
ONS OME APN
TRIUMFAPNs
CERN-1 APN-1 APN-2
APN-2 APN-2
OXC Wizard
ons-nyc01-enet_2/4
ons-van02-enet_2/2
10.168.1.1
10.168.1.2
APN-2
VLAN-1
VLAN-1
APN-1
APN-2
APN-1
CERN-1
APN-1
APN-2
OXC Wizard-1
Interface
Link
Node
Resource
OS Window Fcts
Status: Connected to http://uclp.canet4.net
TRIUMF
File Edit View Tools Window HelpV2
ONS OME APN
TRIUMFAPNs
CERN-1 APN-1 APN-2
APN-2 APN-2
OXC Wizard
SURFnet-CERN
SURFnet-CERN
ons-nyc01-enet_2/4
ons-van02-enet_2/2
10.168.1.1
10.168.1.2
APN-2
VLAN-1
VLAN-1
APN-1
APN-2
APN-1
CERN-1
APN-1
APN-2
OXC Wizard-1
External APN is imported - APN-2 completed – CERN-1 is completed – left click Palette close tab – left click select CERN-1 diagram tab
External SURFnet-CERN APN imported CERN-1 complete
OS Window Fcts
Status: Connected to http://uclp.canet4.net
TRIUMF
File Edit View Tools Window HelpV2
ONS OME APN
TRIUMFAPNs
CERN-1 APN-1 APN-2
10.168.1.1 10.168.1.2
VLAN-1
ons-van02-enet_2/2 ons-nyc01-enet_2/4
APN-1CERN-1 CERN-1APN-2
ons-nyc01-enet_2/4
ons-van02-enet_2/2
10.168.1.1
10.168.1.2
APN-2
VLAN-1
VLAN-1
APN-1
APN-2
APN-1
CERN-1
APN-1
APN-2
OXC Wizard-1
SURFnet-CERN
Left click select CERN-1 diagram tab
Select CERN-1 diagram
OS Window Fcts
Status: Connected to http://uclp.canet4.net
TRIUMF
File Edit View Tools Window HelpV2
ONS OME APN
TRIUMFAPNs
ons-nyc01-enet_2/4
ons-van02-enet_2/2
10.168.1.1
10.168.1.2
APN-2
VLAN-1
VLAN-1
APN-1
APN-2
APN-1
CERN-1
CERN-1
APN-1
APN-1 APN-2
APN-2
OXC Wizard-1
SURFnet-CERN
10.168.1.1 10.168.1.2
VLAN-1
ons-van02-enet_2/2 ons-nyc01-enet_2/4
APN-1CERN-1 CERN-1APN-2
Left click select File – mouse down – select SAVE –left click – CERN-1 diagram and all subtree components are saved
Save CERN-1 diagram
New >
Open...
Close
Save
Save as ...
Exit
Mouse down select OXC Wizard-1 in tree – right click – mouse over – select – double click
Select OXC Wizard-1 and display status – Gary Finley mods
OS Window Fcts
Status: Connected to http://uclp.canet4.net
TRIUMF
File Edit View Tools Window HelpV2
ONS OME APN
TRIUMFAPNs
ons-nyc01-enet_2/4
ons-van02-enet_2/2
10.168.1.1
10.168.1.2
APN-2
VLAN-1
VLAN-1
APN-1
APN-2
APN-1
CERN-1
CERN-1
APN-1
APN-1 APN-2
APN-2
OXC Wizard-1
SURFnet-CERN
10.168.1.1 10.168.1.2
VLAN-1
ons-van02-enet_2/2 ons-nyc01-enet_2/4
APN-1CERN-1 CERN-1APN-2
OXC Wizard-1 creates a status panel displaying out currently available shortest path links – select start lease – drop down and select start date – select end lease date – left click show available button
OXC Wizard-1 Status Display – Gary Finley mods – lease system
OS Window Fcts
Status: Connected to http://uclp.canet4.net
TRIUMF
File Edit View Tools Window HelpV2
ONS OME APN
TRIUMFAPNs
ons-nyc01-enet_2/4
ons-van02-enet_2/2
10.168.1.1
10.168.1.2
APN-2
VLAN-1
VLAN-1
APN-1
APN-2
APN-1
CERN-1
CERN-1
APN-1
APN-1 APN-2
APN-2
OXC Wizard-1
SURFnet-CERN
OXC Wizard-1
STS-24c
STS-12c
Legend
Show Available Rediscover Reserve
start lease
end lease
OXC Wizard-1 creates a new status panel displaying all available shortest path links – hold shift key down and successibvely click lightpath segments to reserve – segment shows green handles when selected - when complete - select left click reserve to hold OXC path segments for lease period
OXC Wizard-1 Status Display – Gary Finley mods – reserve OXC path
OS Window Fcts
Status: Connected to http://uclp.canet4.net
TRIUMF
File Edit View Tools Window HelpV2
ONS OME APN
TRIUMFAPNs
ons-nyc01-enet_2/4
ons-van02-enet_2/2
10.168.1.1
10.168.1.2
APN-2
VLAN-1
VLAN-1
APN-1
APN-2
APN-1
CERN-1
CERN-1
APN-1
APN-1 APN-2
APN-2
OXC Wizard-1
SURFnet-CERN
OXC Wizard-1
STS-24c
STS-12c
Legend
Show Available Rediscover Reserve
12:00 AM January 1, 2006
12:00 PM March 31, 2006
OXC Wizard-1 creates a new OXC Reservation-1 in tree – double left click OXC Reservation-1 icon in tree to display reservation panel - select left click Cancel button to remove reservation and return lightpath segments to the available pool
OXC Wizard-1 Reservation Display – Gary Finley mods – reserved OXC path
OS Window Fcts
Status: Connected to http://uclp.canet4.net
TRIUMF
File Edit View Tools Window HelpV2
ONS OME APN
TRIUMFAPNs
ons-nyc01-enet_2/4
ons-van02-enet_2/2
10.168.1.1
10.168.1.2
APN-2
VLAN-1
VLAN-1
APN-1
APN-2
APN-1
CERN-1
CERN-1
APN-1
APN-1 APN-2
APN-2
OXC Wizard-1
SURFnet-CERN
OXC Wizard-1
STS-24c
STS-12c
Legend
Cancel
OXC Reservation-1
12:00 AM January 1, 2006
12:00 PM March 31, 2006
OXC Reservation-1