unbrako price list
TRANSCRIPT
INR PRICE LIST No. DFL/07
thEffective 15 May, 2012.
All information contained in this catalogue has been prepared to assist users in their requirements for Fasteners. The
information is based on International Fastener Standards. All such source material and information beyond the control
of Deepak fastener Ltd (DFL) is subject to change.
Whilst every care has been taken to ensure that all information and technical data is accurate, DFL will not be liable to
any customer that relies on any matter, fact or representation nor will it be liable for any subsequent damage or loss
resulting from the use of any information contained in this catalogue. Customers are advised to make their own enquiries
or seek independent advice regarding the fitness and suitability of the products listed.
Deepak Fasteners Ltd. has the right to change the price, specifications and other particulars contained in this pricelist,
without any prior notice. The products listed in this catalogue might not be stocked at DFL at all times and customers are
advised to enquire the availability of the same. E. & O.E.
.
.
.
Deepak Fasteners through its Unbrako Division warrants that these products conform to industry standards
specified herein and will be free from defects in materials and workmanship. This warranty is expressly given in lieu of any
and all other express or implied warranties, including any implied warranty of merchantability or fitness for a particular
purpose, and in lieu of any other obligation on our part of DFL will at its option, repair or replace free of charge (excluding
all shipping and handling costs) any products which have not been subject to misuse, abuse, or modification and which in its
sole determination were not manufactured in compliance with the warranty given above.
The remedy provided herein shall be the exclusive remedy for any breach of warranty or any claim arising in any
way out of the manufacture, sale or use of these products. In no event shall Deepak Fasteners be liable for consequential,
incidental or any other damages of any nature whatsoever except those specifically provided herein for any breach of warranty
or any claim arising in any way of the manufacture, sale or use of these products. No other person is authorised by Deepak
Fasteners to give any other warranty, written or oral, pertaining to the products. .
Disclaimer
Limited Warranty And Exclusive Remedy
Surface Finish : All the products, unless otherwise order, are supplied in black thermal finish with a coat of rust preventive oil.
Packing : All products are supplied in standard packing as described in respective price tables. For sizes M6 (1/4) and
above – 3% extra packing charges will be applicable if the order quantity is less than one carton.
Plating : No guarantee can be given for Unbrako products which are plated by users or by outside plates, who may not
have considered hydrogen embrittlement problem.
Note
The Price, specifications and other particulars contained in this pricelist are subject to change with notice.
Unbrako is a single source, full service provider of engineered, high strength precision fasteners for
industrial, infrastructure, petrochemical, automotive and other custom designed applications where Quality,
Performance and Reliability make the difference. Unbrako products are primarily used in performance
critical applications and incorporate unique design and workmanship features that enable them to
withstand high fatigue loads and cycles over prolonged periods. Unbrako's manufacturing and
engineering facilities operate around the clock to cater for the needs of its customers.
Unbrako
A Ubout s
Unbrako is committed to total customer satisfaction. This is
achieved through continuous improvement in every operational
aspect, via Unbrako Quality Assurance system that aims at Zero
defect manufacture and supply. Unbrako's True goal is to provide
the best solution at optimal cost, every time and on time.
Commitment To Excellence
Unbrako
DFL Global Strength
Since 1911, Unbrako has been a leader in advancing the technology of bolted joints
and meeting the needs of industry for stronger and better performing fasteners. Products® ®such as the famous Unbrako socket head cap screw and Durlok fasteners are the
solutions of choice for engineering applications across the world. Today, Deepak Fasteners
(DFL) along with its Unbrako division operates in over 35 countries across 4 continents and
supplies the automotive, aerospace, engineering and construction industries with
advanced products and sophisticated fastening solutions.
Capabilities
With advanced manufacturing, engineering and logistics facilities such as modern cold heading
and thread rolling, state-of-the-art heat treatment plant and a sophisticated sourcing and logistics
network, Unbrako provides a full-service package, designed to suit customer needs. Unbrako is
equipped and prepared to provide technical support through the entire design, development and
manufacturing/supply cycle. Unbrako's focus is on building long term relationships with its
customers and raw material or part supply partners, ensuring better understanding of customer
needs and resulting in superior customer satisfaction.
Utilizing the international network of DFL and allied companies and focusing on the long term
relationships, Unbrako, with ISO/TS accreditation, provides a full range of offerings including
sourcing and procurement of complete range of industrial fastening hardware (bolts, screws, SEM's,
nuts, studbolts, self locking fasteners, thread forming fasteners etc.) and full-service supply of complete
hardware packages to a plant or production line. Full-service supply includes engineering and design
support, procurement and purchasing services, localized warehousing and transport, a variety of
packaging options and choice of delivery frequencies - they are all available to provide the right
answer to any customer need.
Supply Chain
UnbrakoOur Commitment To Quality
ISO 9001:2008 CE CERTIFIED: 14399 & 15048
DELTA DORKEN APPROVAL WRC PT/285/0609
ISO / TS 16949:2002
SELLIHCA ID. 108198
1
Quick Production Selection Guide
Socket Head Cap Screws
Socket
Countersunk
Head Screws
Socket ButtonHead Cap Screws
2N/mm
190000 1,300
(12.9)M2 to M42
1/8
to 1”
160000
--
HardnessHRc 45
Min.
HardnessHRc 47 Min.
800/830(8.8)1,040(10.9)
GradeR,SV
NutGrade8/10
Bolts8.8/10.9
Nuts8/10
--
Stud B7
Nut 2H
--
800/830(8.8)1,040(10.9)
M3 to M42
M12-M56
M16 to M30
M6 to M72Nut
Grade 8/5
M4 to M42
1.5 to
32 mm
M3 to M20
1,050
(12.9)M3 to M12
1,050
(12.9) M3 to M243/16”
to
5/16”--
1/8”
to
3/4”
1/16”
to 3/4”
1/4”to2”
--
1/2”
to
2-1/4”
1/8”to1”
3/16”
to 10”3/8”
to
1.1/4”-- --
2269 4762 912 4168
2470
B18.3.1M B1176
6761 -- 7991 4168
2470
B18.3.5M --
7380 9427 4168 B18.3.4M --
--
3/16”
to
3”
6094 4026402740284029
913914915916
4168
2470
B18.3.6M B1177
-- 3082 2936 911 4168
2470
B18.3.2M B4648
1/2”to
12”
1364 40144017
931933
10831768
B18.2.1 B1180
--1364 4032 934 1083
1768B18.2.4.1M
B18.2.2B1181
-- 375766236649
741247757415
691469156916
4395 B18.2.3.7MB18.2.4.6M
B1186
2.1/4”
to
27”
A193
A194
3/8”to
12” As per customer specifications
Socket HeadShoulderScrew
Socket SetScrews KnurledCup
Durlok Bolt
HexWrenches
Hex HeadBolts
Hex Nuts
High StrengthStructuralBolts, Nuts,Washers
Stud With 2Heavynuts
SpecialProducts
PRODUCTTENSILE STRENGTH
Property Class
Psi. Min.
SIZE RANGE
Diameter
Metric Inch*
Length
Inch*
6 to410 mm
60
to
500 mm
40 to300 mm
--
10 to300 mm
--
3 to
85 mm
6 to
50 mm
6 to
60 mm
6 to
300 mm
Metric
EQUIVALENT STANDARDS
IS ISO DIN BS ANSI JIS
*Thread type in any of the following inch series : BSW, BA, UNC & UNF.** Thread type in NPTFNote : UNBRAKO standards meet, or in many instances, exceed therequirements of the standards listed.
No guarantee can be given for UNBRAKO products which have been plated by the users and / or outside plates, who may not have considered hydrogen embrittlement problem.
Plating :
-- (12.9) M6 to M24 --10 to
120 mm-- -- 7379 9841 4168 -- --
12.9-- M6 to M20 -- 12 to100 mm --
1/4” to1-1/2”
As Per Unbrako Specification
Unbrako
2
Note : Sizes in brackets are non-preferred standards No guarantee can be given for UNBRAKO products which have been plated by the users and / outside plates, who may not haveconsidered hydrogen embrittlement problem.
Plating :
Thread Size Comparison
COARSE
M3
M4
M5
M6
M8
M10
M12
(M14)
M16
(M18)
M20
(M22)
M24
(M27)
M30
(M33)
M36
(M39)
M42
0.50
0.70
0.80
1.0
1.25
1.50
1.75
2.00
2.00
2.50
2.50
2.50
3.00
3.00
3.50
3.50
4.00
4.00
4.50
51
36
32
25
20
17
14.5
12.5
12.5
10
10
10
8.5
8.50
7.25
7.25
6.40
6.40
5.60
3.00
3.00
2.00
3.00
2.00
2.00
2.00
1.50
1.50
1.50
1.50
1.50
1.25
1.00
1.25
–
–
–
– –
–
–
–
25
20
20
17
17
17
17
17
13
13
13
13
8.5
8.5
8.5
39.00
42.00
33.00
36.00
27.00
30.00
24.00
18.00
20.00
22.00
14.00
16.00
12.00
8.00
10.00
6.00
4.00
5.00
3.00 0.118
0.157
0.197
0.236
0.315
0.394
0.472
0.551
0.630
0.709
0.787
0.866
0.945
1.063
1.181
1.299
1.417
1.535
1.653
METRIC PRODUCTS
THREAD PITCH & T.P.I.
FINESIZE
T.P.I. PITCH(mm) T.P.I. mm
Major Dia
Inch
MajorDia
#5
#6
#8
#10
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-1/2
40
32
32
24
20
18
16
13
11
10
9
8
7
7
6
44
40
36
32
28
24
24
20
18
16
14
12
12
12
12 1.500
1.250
1.000
1.125
0.750
0.875
0.625
0.500
0.313
0.375
0.250
0.164
0.190
0.125
0.138
UNIFIED INCH PRODUCTS
T.P.I.
SIZE
UNC UNF inch
1/8
5 BA
4 BA
3 BA
3/16
2 BA
1 BA
1/4
0 BA
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-1/2 6
7
8
7
10
9
11
14
12
18
16
20
24
40 -
32
26
22
20
18
16
14
12
11
10
9
9
8 1.500
1.250
1.000
1.125
0.750
0.875
0.625
0.438
0.500
0.313
0.375
0.250
0.187
43.1
38.5
34.8
31.3
28.2
25.4 0.236
0.185
0.209
0.161
0.126
0.142
SIZE T.P.I.
BSW BSF
T.P.I.
BA
0.125
B.S. INCH PRODUCTS
PITCH(mm)
MajorDia
inch
MajorDia
inch
Socket Head Cap Screw
3
M3WRENCH 2.5mm
InternationalPart No.
Price/100 Pcs
BoxQuantity
M2WRENCH 1.5mm
34568
101216202530354045
InternationalPart No.
Price/100 Pcs
BoxQuantity
Length
M2.5WRENCH 2mm
InternationalPart No.
Price/100 Pcs
BoxQuantity
104151104152104154104155104157104159106216
1,250560570580590600620
500500500500500500500
104161104162104163104164104166
540560575590650
500500500500500
106218103002122097113583120870103003113623103010103013106219406027700034
881759555464464486486508594742850940
500500500500500500500200200200200200
M6WRENCH 5mm
InternationalPart No.
Price/100 Pcs
BoxQuantity
M4WRENCH 3mm
InternationalPart No.
Price/100 Pcs
BoxQuantity
Length
M5WRENCH 4mm
InternationalPart No.
Price/100 Pcs
BoxQuantity
106223113810113839121077103014105753125381103018103019103021103022103023400835180011
755564447403421452468555608673769881
1,4152,839
500500500500500500500500200200200200200200
122122122243121094103024113970121096103029115292103030103031103035103038103040106225106228700072404774181525
551321321352378403464508555604608
1,0421,3371,4481,5591,8041,9062,104
500500500500200200200200200200200200200200200200200200
103042122111120872103044119790119937122121121090121075122087112624113128122088103047103048103049103051103052103053103054
717475475452475532602659717776822920
1,7021,7651,8412,0142,1822,3442,6453,474
200200200200200200200200200200200200200200200200200200200100
68
1012162025303540455055606570758090
100110
Metric
Unbrako
4
Socket Head Cap Screw
1. Specifications :2. Threads :3. Material :4. Mechanical Properties :5. Note : 6.
Generally conforming to IS : 2269, DIN : 912, ISO : 4762. ISO Metric (Coarse Series) 4g6g as per IS : 4218, ISO : 261, ISO : 965. Unbrako High Grade Alloy Steel.
Property Class 12.9 as per IS : 1367, ISO : 898 Part I.Upto 80MM Dia can be manufactured against request.
For sizes beyond those listed, prices on application.
Length
1012162025303540455055606570758090100110120130140150160170180200220230240260280
InternationalPart No.
Price/100 Pcs
BoxQuantity
M8WRENCH 6mm
103056114972103058122086119351119383122113113143121076121068103063121070103064103066103069103070103073103075103076103077106230106231106232106233
921695610605673742806875
1,0211,0761,1871,2771,3891,4851,5752,2722,6373,1283,9094,5655,5405,9506,4266,855
200200200200200200200200200200100100100100100100100100100
50505050
100
InternationalPart No.
Price/100 Pcs
BoxQuantity
M10WRENCH 8mm
106237103080113163115060122114113257100845121088125660103087122217103088125786103090103091103094103095103096103097106240106241106242106243210001106244
1,1061,0291,0721,0241,1291,2191,4881,6081,7121,8481,9992,1602,3282,4803,4303,9214,5935,4405,5027,4918,3599,29711,62112,81413,074
200200200100100100100100100100100100
50505050505050505050502525
InternationalPart No.
Price/100 Pcs
BoxQuantity
M12WRENCH 10mm
100100100100100
505050505050505050502525252525252020202020202020
2,6062,2832,1682,2072,2272,4992,3182,7022,8603,0033,1633,3073,9694,4874,9586,1067,0208,3069,261
10,23816,88018,55818,55820,09121,62527,84032,46637,10139,956
112607122250122251125530114996115075112360122255122260122261103098103099103100103103122142125791103104103107103108103110107456181063107458107459400570183555400571400572400573
InternationalPart No.
Price/100 Pcs
BoxQuantity
M14WRENCH 12mm
5,9345,9344,9895,1065,1995,3165,3825,7035,7896,2416,6096,9177,0758,7829,542
10,31011,65012,43713,29114,17615,06215,948
400528400529400530400531400532120863400533112000400534400535400536400537400538400539400540400508180223180103180225180226210002180227
50505050505050505050502020252525252525101010
Metric
Grey highlighted items are full threaded
Socket Head Cap Screw
5
Length
2025303540455055606570758090100110120130140150160170180200220230240260280300
InternationalPart No.
Price/100 Pcs
BoxQuantity
M16WRENCH 14mm
InternationalPart No.
Price/100 Pcs
BoxQuantity
M18WRENCH 14mm
InternationalPart No.
Price/100 Pcs
BoxQuantity
M20WRENCH 17mm
InternationalPart No.
Price/100 Pcs
BoxQuantity
M22WRENCH 17mm
210003106248103112103113125751103115112474103117112594103118103119103120125658103122103123103124103126103127103128103129103364180418107460107448400574182815400575400576400577400578
5,6795,6795,6794,7724,6444,9784,8275,4095,1865,8066,2676,6266,9377,7328,8099,566
10,34411,79112,62713,45626,79429,84029,84032,97538,06343,15244,72056,45668,18673,057
505050505050252525202020201010202020202010101010101010101010
183894400541400542400606100844400543400544400545400546400547400549400550400551400548400552180311180229180407180230210005100231
15,93716,13614,13014,23314,34314,43214,54914,66615,66316,68717,01017,35418,20620,14522,06524,56726,53428,50630,40736,00941,612
202020251010102510101010102515101010101010
210006107465107466103130103131103132103136103137103138103141103142103143103144103145103146103148103150103151103152107462180495107463107464400553181001400554400555400556400557
13,51813,51813,69611,99112,07411,56212,24611,71812,45113,29714,16313,71714,72715,44217,09318,74320,37222,00924,77431,75236,26236,26237,82339,39750,57161,74475,74289,72896,137
251010101010101010101010101010101010101010101010
55555
180181180182180183180184180185210007180186180187180188180189180190180191180192180193180194
180196180198210008
210009210010210011210012
16,66718,75019,27321,46521,86423,17824,36125,55726,94629,31131,67641,66048,67364,89276,485
81,84187,59696,246
103,891111,530119,169127,682
10101010101010101010
55555
555
5555
1. Specifications :2. Threads :3. Material :4. Mechanical Properties :5. Note : 6.
Generally conforming to IS : 2269, DIN : 912, ISO : 4762. ISO Metric (Coarse Series) 4g6g as per IS : 4218, ISO : 261, ISO : 965. Unbrako High Grade Alloy Steel.
Property Class 12.9 as per IS : 1367, ISO : 898 Part I.Upto 80MM Dia can be manufactured against request.
For sizes beyond those listed, prices on application.
Metric
Grey highlighted items are full threaded
Unbrako
6
Socket Head Cap Screw
1. Specifications :2. Threads :3. Material :4. Mechanical Properties :5. Note : 6.
Generally conforming to IS : 2269, DIN : 912, ISO : 4762. ISO Metric (Coarse Series) 4g6g as per IS : 4218, ISO : 261, ISO : 965. Unbrako High Grade Alloy Steel.
Property Class 12.9 as per IS : 1367, ISO : 898 Part I.Upto 80MM Dia can be manufactured against request.
For sizes beyond those listed, prices on application.
M30WRENCH 22mm
InternationalPart No.
Price/100 Pcs
BoxQuantity
M24WRENCH 19mm
InternationalPart No.
Price/100 Pcs
BoxQuantity
Length
M27WRENCH 19mm
InternationalPart No.
Price/100 Pcs
BoxQuantity
103153103155103157103158103159103160103161103162103163103165103166103167103168103170103171104143104146104147400560400561400562400563400564
15,53614,88216,74817,21518,30319,52720,68821,76022,82624,07226,16928,29330,41232,52234,64656,08660,18364,42568,94973,48075,77779,61385,301
101010101010101010101010
55555555555
455055606570758090100110120130140150160180200220240260280300
34,11835,85037,21140,94443,67446,40549,13452,54454,59358,00991,447
101,003109,880136,970151,773165,319176,444186,151
31,32131,10533,49635,89337,24739,12943,72346,45349,18352,59754,64958,07287,38996,514
104,992130,376140,209149,994159,825169,657
Metric
Grey highlighted items are full threaded
Socket Head Cap Screw
7
1. Specifications :2. Threads :3. Material :4. Mechanical Properties :5. Note : 6.
Generally conforming to IS : 2269, DIN : 912, ISO : 4762. ISO Metric (Coarse Series) 4g6g as per IS : 4218, ISO : 261, ISO : 965. Unbrako High Grade Alloy Steel.
Property Class 12.9 as per IS : 1367, ISO : 898 Part I.Upto 80MM Dia can be manufactured against request.
For sizes beyond those listed, prices on application.
M42WRENCH 32mm
InternationalPart No.
Price/100 Pcs
BoxQuantity
M33WRENCH 24mm
InternationalPart No.
Price/100 Pcs
BoxQuantity
Length
M36WRENCH 27mm
InternationalPart No.
Price/100 Pcs
BoxQuantity
758090
100110120130140150160180200220240260280300
103,678110,493116,666123,425129,599136,420143,172194,795212,513230,231280,988301,072321,129341,205361,276
53,91255,96160,73963,46966,88773,01376,43781,21685,314
112,953125,571136,490169,149182,219190,621201,114216,818
65,39471,39773,41277,39980,74183,41692,09395,414
128,402143,468155,480192,237197,525211,544225,605239,672
Grey highlighted items are full threaded
Metric
Unbrako
8
Socket Head Cap Screw
Length
3/81/25/83/47/811-1/41-1/21-3/422-1/42-1/22-3/433-1/43-1/244-1/255-1/26
InternationalPart No.
Price/100 Pcs
BoxQuantity
InternationalPart No.
Price/100 Pcs
BoxQuantity
InternationalPart No.
Price/100 Pcs
BoxQuantity
InternationalPart No.
Price/100 Pcs
BoxQuantity
3/16WRENCH 5/32” mm
1/4WRENCH 3/16” mm
400056400057400058400059
400061400062400063400064400065210021400066
405405377405
454501573686686772858
200200200200
200200200200200200200
400068400069400070400071400072400073400074400075400076400077400078400079400080400081400082400083400084
475475452475504532602671822822
1,6661,7141,9511,9512,3382,3382,576
200200200200200200200200200200200200200200200200100
5/16WRENCH 7/32” mm
400085400086400087400088400089400090400091400092400093400094400095404433400096701026400098400099400100701030
656575600625669767858
1,0141,0141,2181,2181,4861,4862,4812,4812,9444,6195,350
200200200200200200200200200200100100100100100100100100
3/8WRENCH 5/16” mm
400101400102400103400104400105400106400107400114400109400110400111400112400113400114400115400116400117400118400181400119
993933851944944
1,0351,1531,3761,4311,6501,7251,9841,9842,9062,9763,4935,1506,2827,5517,776
200200200200200100100
50100100100100100
50505050505050
1. Specifications :2. Threads :3. Material :4. Mechanical Properties :5. Note :
Generally conforming to BS : 2470. BS Whitworth Fine, Medium as per BS : 84. Unbrako High Grade Alloy Steel.
As per BS 2470Upto 4 Inch Dia can be manufactured against request.
Grey highlighted items are full threaded
Inch
InternationalPart No.
Price/100 Pcs
BoxQuantity
InternationalPart No.
Price/100 Pcs
BoxQuantity
LengthInternational
Part No.Price/
100 Pcs Box
Quantity
7/16WRENCH 5/16” mm
1/2WRENCH 3/8” mm
5/8WRENCH 1/2” mm
2,2252,2252,2692,4262,4262,7882,9213,1453,2954,2634,2634,9377,0897,0898,0828,089
400121400122400123400124400125210025701059210026400127210027400128400129210028210029210030210031
100100100100100
5050502050502050255025
3/47/811-1/41-1/21-3/422-1/42-1/22-3/433-1/43-1/244-1/255-1/266-1/277-1/288-1/2910
400130402942400131400132400133400134400135400136400137400138400139400140400141400142400143400144400145400146400147400148210032400149
2,6062,6062,2762,3852,4272,5942,7123,1253,2603,5403,8484,6024,6025,3236,5387,8318,6228,925
17,70518,56519,29320,104
100100100100
505050505050505020252525202020151525
210033400150400151400152400153400154400155400156400157400158701096400159400160400161400162400163400164400165400166210035400167210036210037210038
4,9194,9194,2764,4254,7074,9315,3575,3575,8815,8816,5726,8588,1478,6449,534
11,83912,90127,40327,40328,45330,22239,5473962951855
505050505020202020201010101515202010101010101010
Socket Head Cap Screw
9
1. Specifications :2. Threads :3. Material :4. Mechanical Properties :5. Note :
Generally conforming to BS : 2470. BS Whitworth Fine, Medium as per BS : 84. Unbrako High Grade Alloy Steel.
As per BS 2470Upto 4 Inch Dia can be manufactured against request.
Grey highlighted items are full threaded
Inch
Unbrako
10
Socket Head Cap Screw
InternationalPart No.
Price/100 Pcs
BoxQuantity
InternationalPart No.
Price/100 Pcs
BoxQuantity
LengthInternational
Part No.Price/
100 Pcs Box
Quantity
11-1/41-1/21-3/422-1/42-1/22-3/433-1/43-1/244-1/255-1/266-1/277-1/288-1/2910
3/4WRENCH 9/16” mm
7/8WRENCH 9/16” mm
1WRENCH 5/8” mm
50101010101010101010101010101010101010101010
5
12,27712,27710,82711,07511,07511,31411,31412,87612,87613,37713,37714,02717,05218,52720,50122,50229,56630,25330,94031,56636,62836,62840,698
210039400168400169400170400171400172400173400174400175400176400177400178400179400180700121400182400183400184210040400185210041400186701127
400187210043400188404637400189210044400190701133400191400192701136701137210047400193210048701139210050210051210052210053
17,43818,12718,12719,52719,52721,95922,00224,26624,26625,60230,10432,34134,61536,86764,00664,00666,31967,75771,50771,507
1010101010101010101010101010555555
210054210055400194404571400195210056400196210057400197400198400199400200183785400201210059400202210060400203210061210062210063
15,90216,52717,31418,66318,66321,02121,02123,18023,18025,60428,68130,90833,06936,90659,06861,19363,38165,50671,63273,69581,884
151510101010101010555555555555
1. Specifications :2. Threads :3. Material :4. Mechanical Properties :5. Note :
Generally conforming to BS : 2470. BS Whitworth Fine, Medium as per BS : 84. Unbrako High Grade Alloy Steel.
As per BS 2470Upto 4 Inch Dia can be manufactured against request.
Grey highlighted items are full threaded
Inch
11
Socket Countersunk Head Cap Screws (CSK)
Length
68
101216202530354045505560
InternationalPart No.
Price/100 Pcs
InternationalPart No.
Price/100 Pcs
InternationalPart No.
Price/100 Pcs
InternationalPart No.
Price/100 Pcs
InternationalPart No.
Price/100 Pcs
M3WRENCH 2mm
106283103303103304103305103306103308106284
778919987
1,0591,2001,3411,483
103309103311103312103313103315103316103317220001220002220003220004
499499529569617719869
1,8031,9292,1702,411
M4WRENCH 2.5mm
103318103319103320103321103322
103324106289220005220006220007
103323
738510529569612719869
1,1571,8032,0292,253
M5WRENCH 3mm
M6WRENCH 4mm
M8WRENCH 5mm
103328103329103330103331103332103333103334103335220008220009220010
564564617660773889
1,0111,1572,0602,5762,833
103337103338103340103341103342103343103344106297220011220012220013
736736788904
1,0351,1761,3411,5072,3612,8183,074
200Qty. Per Box
1. Note : 2. Specification : 3. Threads : 4. Material : 5. Mechanical Properties :
All sizes are fully threaded.Generally conforming to IS : 6761, DIN 7991.
ISO Metric, 4g6g as per IS : 4218.UNBRAKO High Grade Alloy Steel.
Property Class 12.9 as per IS : 1367, ISO : 898 Part - 1
Metric
Unbrako
12
Socket Countersunk Head Cap Screws (CSK)
1. Note : 2. Specification : 3. Threads : 4. Material : 5. Mechanical Properties : 6.
All sizes are fully threaded.Generally conforming to IS : 6761, DIN 7991.
ISO Metric, 4g6g as per IS : 4218.UNBRAKO High Grade Alloy Steel.
Property Class 12.9 as per IS : 1367, ISO : 898 Part - 1 Bold black lines are used to indicate quantity per box.
LengthInternational
Part No.Price/
100 Pcs International
Part No.Price/
100 Pcs International
Part No.Price/
100 Pcs International
Part No.Price/
100 Pcs International
Part No.Price/
100 Pcs
Qty. Per Box
162025303540455055606570758090
100110120130
M10WRENCH 6mm
M12WRENCH 8mm
103347103348103349103350103351103352106302106303106304220014220015220016220017220018220019
1,1961,1161,2941,4831,7051,9552,2002,4832,8183,0743,3313,5874,6124,9185,534
103354103355103356103357106311103358106312106313220020220021220022220023
2,1792,4952,6832,9743,2753,5724,4214,7655,4205,8376,2546,672
M16WRENCH 10mm
103359103360103361106318103362106320103363183908106321220025220026106325629621
4,6895,0545,4146,5986,1387,4267,8368,2468,6579,831
10,27511,23112,477
M20WRENCH 12mm
106332106334106335106336106337183912106338183913106339106341106342220029220030220031
10,67511,45212,20912,95813,70314,48015,25716,58520,61521,42824,51427,10529,69231,980
220032220033401689220034401690220035401691401692401693701356183179701358
19,73521,38923,04224,69626,35028,00429,65732,96537,48542,00546,52651,046
5102550100
M24WRENCH 14mm
Quantity per box 25Quantity per box 200
Metric
Separate catalogue is available on request
Length
10121516202530405060708090
100
InternationalPart No.
Price/100 Pcs
BoxQuantity
InternationalPart No.
Price/100 Pcs
BoxQuantity
InternationalPart No.
Price/100 Pcs
BoxQuantity
InternationalPart No.
Price/100 Pcs
BoxQuantity
M6 (M5)WRENCH 3 mm
M8 (M6)WRENCH 4 mm
105364105365401484105366105368105370105372105373
3,8744,2034,8544,8545,5066,3227,1388,419
5050505050505050
105375401486105377105379105380105381105383105386
3,8674,8294,9855,5956,3607,1278,6569,505
5050505050505050
401487105388105390105392105393105394105395105396105402106422
50505050505050505050
5,9196,0886,7637,6128,456
10,14410,65411,26112,68414,091
M10 (M8)WRENCH 5 mm
M12 (M10)WRENCH 4 mm
401485105404105406105407105410105411105412105416105417105420105427105433
12,8517,9128,7059,702
10,69812,68914,19016,11517,12117,90018,11521,352
252525252525252525252525
InternationalPart No.
Price/100 Pcs
BoxQuantity
InternationalPart No.
Price/100 Pcs
BoxQuantity
InternationalPart No.
Price/100 Pcs
BoxQuantity
Length
M16 (M12)WRENCH 8 mm
M20 (M16)WRENCH 10 mm
M24 (M20)WRENCH 12 mm
105434105435105436105437105438105440106343106344106346
16,46019,35422,24725,13828,03229,89230,99936,70956,658
252525252525252525
30405060708090
100120
105441105442105444105448105449105450106347106348
45,15351,07256,98862,90768,82474,74380,65992,494
1010101010101010
401488401489401490401491401492401493401494
156,172170,873185,574200,280214,980229,681259,088
5555555
13
Socket Head Shoulder Screws
1. Specification : 2. Thread Class : 3. Material : 4. Mechanical Properties : 5. Method of Specifying :
Generally conforming to BS: 4168, DIN 9841, ISO 7379.4g6g (Precision Ground to h8 tolerance on the Shoulder (Size Indicator Ground Diameter)
Unbrako High Grade Alloy Steel. Properties Class conforming to 12.9 as per ISO: 898 Part-I.
The nominal diameter of a shoulder screw is the diameter of the shoulder & not the thread diameter but it is recommended that both are quoted, e.g. 16mm (M12) x 70mm long to BS 4168.
New
Unbrako
14
LengthInternational
Part No.Price/
100 Pcs International
Part No.Price/
100 Pcs International
Part No.Price/
100 Pcs International
Part No.Price/
100 Pcs International
Part No.Price/
100 Pcs
M3Wrench 1.5 mm
M4Wrench 2 mm
M5Wrench 2.5 mm
3456810121620253035404550556065
Qty. Per Box
104076103172103175103176103177103178103179103180551093
310314318322327344366458506
103182103185103186103187103188103189103191103193701961406498551679551680
270270274278298314449520563
1,0791,3651,755
103194103195103196103197103198103199103202103203103204181179551094
187191191207238291339392546848
1,008
M6Wrench 3 mm
M8Wrench 4 mm
103207103208103209103211103212103214103217103218103219103220103221103222
191207234261343371465632942
1,0651,1651,371
180002103224103227103228103229103230103231103235103236103237701998103240551095551096551097
366230234291344446552645887
1,0501,1481,2792,2102,4122,791
200
Socket Set Screws (Grub Screws) Metric
1. Specification : 2. Threads : 3. Material : 4. Mechanical Properties : 5. NOTE :
Generally conforming to the following standardsISO Metric, 4g6g as per IS:4218. ISO 261, ISO 965.Unbrako High Grade Alloy Steel.
Property Class 45H as per IS : 1367, ISO:898 Part V.PRICE FOR SPECIAL POINT SHOWN BELOW WILL BE 25% EXTRA.
ISO ISO-4026 ISO-4027 ISO-4028 ISO-4029
Knurled cup pointSocket Set Screws (Grub Screws)
LengthInternational
Part No.Price/
100 Pcs
M10Wrench 5 mm
810121620253035404550556065707580
InternationalPart No.
Price/100 Pcs
InternationalPart No.
Price/100 Pcs
InternationalPart No.
Price/100 Pcs
M12Wrench 6 mm
M16Wrench 8 mm
M20Wrench 10 mm
180099103241103244103245103246103247103249103251103252103253103254551098183091551099
420326369493608736
1,0601,2241,3581,5551,8542,9823,3253,470
551687103256103258103259103260103261103262103263103269103270103271103272551100551101
625539644795
1,0911,2611,7121,8992,1092,3023,9754,4645,5685,998
106352103274103276103277103278103279103281103282103283103284551102182790551103551104
1,4291,4381,9492,3082,8863,3463,7064,4475,6446,2087,1549,106
10,20910,890
104149103286103287103288103289103290103292103293103294551105551106551107
4,7045,2496,0686,9187,7368,5889,395
11,11011,80513,30414,04315,268
50100
Quantity per box 200
15
Socket Set Screws (Grub Screws)
1. Specification : 2. Threads : 3. Material : 4. Mechanical Properties : 5. NOTE : 6.
Generally conforming to the following standardsISO Metric, 4g6g as per IS:4218. ISO 261, ISO 965.Unbrako High Grade Alloy Steel.
Property Class 45H as per IS : 1367, ISO:898 Part V.PRICE FOR SPECIAL POINT SHOWN BELOW WILL BE 25% EXTRA.
Bold black lines are used to indicate quantity per box.
ISO ISO-4026 ISO-4027 ISO-4028 ISO-4029
Knurled Cup PointKnurled Cup Point
Qty. Per Box
Metric
Unbrako
16
Socket Set Screws (Grub Screws)
LengthInternational
Part No.Price/
100 Pcs International
Part No.Price/
100 Pcs International
Part No.Price/
100 Pcs International
Part No.Price/
100 Pcs
3/16Wrench 3/32” mm
1/4Wrench 1/8” mm
5/16Wrench 5/32” mm
3/8Wrench 3/16” mm
3/161/45/163/81/25/83/411 1/41 1/21 3/42
400949400951400952400953400954551209400956400957
187191191207227256331467
400961400963400965400967400969400970400972400973400974551108180730
212230234238310471472534903
1,1431,242
400986400977400978400979400980400982400984400983551109400985
230234243301394552671
1,3231,4131,673
400988400989400990400991400993400994400995400996400997
274369448538658946
1,6782,0262,392
Qty. Per Box 200 100
Price/100 Pcs
Price/100 Pcs
Length
1/2Wrench 1/4” mm
5/8Wrench 5/16” mm
3/4Wrench 3/8” mm
Qty. Per Box 100 50
InternationalPart No.
Price/100 Pcs
InternationalPart No.
InternationalPart No.
401003401005401006401008401009401003401012401013401014702408
641700884
1,0911,5233,6354,6055,0376,3427,776
401015401016401017401018401019401020401021401022401023
1,6531,7502,0212,5544,9246,4615,8748,560
10,390
401024401025551110401026401027401028401029401030
3,7744,5445,5987,7869,166
10,78413,20115,903
1/25/83/411 1/41 1/21 3/422 1/23
1. Specification : 2. Threads : 3. Material : 4. Mechanical Properties : 5. NOTE : 6.7.
As per standard ASME/ANSI:B18.3.BS Whitworth, Medium as per BS : 84Unbrako High Grade Alloy Steel.
As per BS : 2470. PRICES FOR SPECIAL POINTS 25% EXTRA.
Socket set screws with BSF/UNC/UNF threads can also be manufactured subject to MOQ. Price on request. Bold black lines are used to indicate quantity per box.
Inch
LengthInternational
Part No.Price/
100 Pcs Box
QuantityInternational
Part No.Price/
100 Pcs Box
QuantityInternational
Part No.Price/
100 Pcs Box
QuantityInternational
Part No.Price/
100 Pcs Box
Quantity
M3Wrench 2mm
M4Wrench 2.5mm
M5Wrench 3mm
M6Wrench 4mm
568101215161820222530
180248106353106354106357106358
106359
200200200200200
200
680680551633704
891
180200106360106331106363401218106364
200200200200200200
492492492539657657
180398180175106365106366401219106367406269106368401220106369106370
200200200200200200200200200200200
938929492539633633
1,384750
1,618891
1,008
180249106372106373401222106374401223106375
106375106378
200200200200200200200
200200
1,771645657750750750809
844880
InternationalPart No.
Price/100 Pcs
BoxQuantity
InternationalPart No.
Price/100 Pcs
BoxQuantity
InternationalPart No.
Price/100 Pcs
BoxQuantity
Length
M8Wrench 5mm
M10Wrench 6mm
M12Wrench 8mm
10121516202530354050
106379106380401226106382106384106385106386106389106390
200200200200200200200200200
1,079915938938961
1,1261,2901,5711,759
106392106393106396106399106401106402
200200200200200100
1,8761,2781,4661,6421,8412,040
106403106404106405106406106407106408106413
100100100100100
5050
3,1663,4003,5413,9634,3854,8075,651
17
ISO Metric Button Head Socket Screws
New
1. Specification : 2. Thread : 3. Material : 4. Mechanical Properties :
Generally conforming to BS: 4168. ISO Metric (Coarse Series) 4g6g.Unbrako High Grade Alloy Steel.
Properties Class conforming to 12.9 as per BS: 6104, ISO: 898 Part-I.
21
Hex Head Bolts/Screws
LengthInternational
Part No.Price/
100 Pcs Box
QuantityInternational
Part No.Price/
100 Pcs Box
QuantityInternational
Part No.Price/
100 Pcs Box
QuantityInternational
Part No.Price/
100 Pcs Box
Quantity
10121618202225303540455055606570758090100110120130140150
170001170002170003170004170005170006170007170008170009170010170011170012240001240002
248257422422365371371370379403454504554605
500500500500500500500500500500500500500500
M4 M5 M6 M8
170013170014170015170016170017170018170019170020170021170022170023170024170025170026170027170028240003
263267431431347370370398398422461554583636723779835
500500500500500500500500500500500500500200200200200
170029170030170031170032170033170034170035170036170037170038170039170040170041170042170043170044170045170046170047170048551178550866550867550868550869
331350362369362375375394419444471504554606657708713752847941
1,4491,5751,6971,8211,945
500500500500500500500500200200200200200200100100100100100100100100100100100
510515464462526506570664703762828913
1,0311,0641,1401,1851,2281,5871,9122,6942,9723,253
170049170050170051170052170053170054170055170056170057170058170059170060170061170062170063170064170065170066170067240010240011240012
500200200200200200200200200200200100100100100100100100
50505050
1. Specifications :2. Threads :3. Material and Mechanical Properties :4. Note :5.
6.
Generally conforming to IS : 1364, ISO : 4014/4017, DIN 931/933. ISO Metric 6g as per IS:4218.
Property Class 10.9 as per IS : 1367.Shaded size are fully threaded. Prices for fully threaded screws beyond shaded sizes will cost 10% extra.
Orders for Property class 8.8 can be accepted subject to our confirmation on the basis of item wise quantities. Price list for 8.8 available separately.
Upto 80MM Dia can be manufactured against request.
Grey highlighted items are full threaded
Metric
UnbrakoHex Head Bolts/Screws
22
LengthInternational
Part No.Price/
100 Pcs Box
QuantityInternational
Part No.Price/
100 Pcs Box
QuantityInternational
Part No.Price/
100 Pcs Box
QuantityInternational
Part No.Price/
100 Pcs Box
Quantity
M10 M12 M14 M16
1618202225303540455055606570758090100110120130140150160180200220240260280300
170068170069170070170071170072170073170074170075170076170077170078170079170080170081170082170083170084170085170086170087170088170089170090170091170092
864864816898876945994
1,2151,4001,4341,5041,6511,7281,8171,9562,2512,4952,8483,3123,6054,0494,4924,8135,1325,774
200200200200200100100100100100100100
50505050505050255050302525
170093
170094170095170096170097170098170099170100170101170102170103170104170105170106170107170108170109170110170111170112170113170114170115170116170117170118170119170120
1,330
1,4551,4341,5241,7241,9122,0452,2082,3022,4072,7032,7992,9903,1983,7364,0824,3564,6055,4257,3007,6538,319
10,99415,81016,20016,54818,07119,362
100
100100100100
5050505050505050252525252525252020252520201818
170121170122170123170124170125170126170127170128170129170130170131170132170133170134170135170136170137170138170139170140170141
2,3132,4932,5932,7562,9953,3203,3943,5463,7413,9684,1624,4064,8275,5556,0386,7057,2079,398
10,37311,58412,427
505025252525252525252525252525252525252525
170142170143170144170145170146170147170148170149170150170151170152170153170154170155170156170157170158170159170160170161170162170163170164170165170166170167170168170169170170
3,0293,0293,0293,3203,3203,2863,4843,7434,1894,3894,5324,8025,1505,9526,3596,5547,3218,3639,7669,969
11,34612,32313,86015,00319,39220,87021,29223,50730,216
5050252525252525252525252525251515151515151515101010101010
1. Specifications :2. Threads :3. Material and Mechanical Properties :4. Note :5.
6.
Generally conforming to IS : 1364, ISO : 4014/4017, DIN 931/933. ISO Metric 6g as per IS:4218.
Property Class 10.9 as per IS : 1367.Shaded size are fully threaded. Prices for fully threaded screws beyond shaded sizes will cost 10% extra.
Orders for Property class 8.8 can be accepted subject to our confirmation on the basis of item wise quantities. Price list for 8.8 available separately.
Upto 80MM Dia can be manufactured against request.
Grey highlighted items are full threaded
Metric
23
Hex Head Bolts/Screws
InternationalPart No.
Price/100 Pcs
BoxQuantity
InternationalPart No.
Price/100 Pcs
BoxQuantity
LengthInternational
Part No.Price/
100 Pcs Box
Quantity
M18 M20 M22
170171170172170173170174170175170176170177170178170179170180170181170182170183170184170185170186170187170188170189240020240021240022240023240024
5,9406,1916,3836,8197,0337,2707,9418,4058,4218,9469,912
10,44911,53112,05712,58413,47514,51216,09917,39419,13320,87422,61424,35426,093
2525252525252510101010101010101010101010101088
3540455055606570758090100110120130140150160180200220240260280300
170190170191170192170193170194170195170196170197170198170199170200170201170202170203170204170205170206170207170208170209170210170211170212170213170214
6,6496,6496,9656,8677,8547,9098,2198,1029,0519,3189,902
10,47211,86912,63513,74814,67114,41917,16720,10021,66230,05331,56033,06836,07539,066
2525252525251010101010101010101010101010
55666
170215170216170217170218170219170220170221170222170223170224170225170226170227170228170229170230170231170232170233170234170235170236
9,86010,61810,96611,74312,15112,56913,08013,93214,86016,17617,29018,21919,13120,03022,84824,81326,80941,17944,60746,32151,48555,163
1010101010101010101010101010
55555555
1. Specifications :2. Threads :3. Material and Mechanical Properties :4. Note :5.
6.
Generally conforming to IS : 1364, ISO : 4014/4017, DIN 931/933. ISO Metric 6g as per IS:4218.
Property Class 10.9 as per IS : 1367.Shaded size are fully threaded. Prices for fully threaded screws beyond shaded sizes will cost 10% extra.
Orders for Property class 8.8 can be accepted subject to our confirmation on the basis of item wise quantities. Price list for 8.8 available separately.
Upto 80MM Dia can be manufactured against request.
Grey highlighted items are full threaded
Metric
UnbrakoHex Head Bolts/Screws
24
InternationalPart No.
Price/100 Pcs
BoxQuantity
InternationalPart No.
Price/100 Pcs
BoxQuantity
LengthInternational
Part No.Price/
100 Pcs Box
Quantity
M24 M27 M30
5055606570758090100110120130140150160170180190200220240260280300
12,43011,89412,94013,39014,19414,70516,07917,17018,57119,41120,37121,48522,50723,60628,18829,41730,64831,85633,06347,40049,09950,79855,86668,296
170237170238170239170240170241170242170243170244170245170246170247170248170249170250170251240025170252240026170253170254170255170256170257170258
101010101010101010
510
5555555555444
170259170260170261170262170263170264170265170266170267170268170269170270170271170272170273
170274
170275170276170277170278170279170280
24,91724,91724,91724,91724,91726,79628,04030,52833,02935,61636,51937,72140,11042,49846,936
51,925
56,56077,94484,04889,56195,05999,518
555555555555555
5
544333
170281170282170283170284170285170286170287170288170289170290170291170292170293170294170295
170296
170297170298170299170300170301170302
33,02933,02933,02933,02933,02933,02934,37237,31140,15244,16645,14247,17550,10152,91459,867
65,931
71,92386,77792,88399,001
105,107111,199
555555555555533
3
533322
1. Specifications :2. Threads :3. Material and Mechanical Properties :4. Note :5.
6.
Generally conforming to IS : 1364, ISO : 4014/4017, DIN 931/933. ISO Metric 6g as per IS:4218.
Property Class 10.9 as per IS : 1367.Shaded size are fully threaded. Prices for fully threaded screws beyond shaded sizes will cost 10% extra.
Orders for Property class 8.8 can be accepted subject to our confirmation on the basis of item wise quantities. Price list for 8.8 available separately.
Upto 80MM Dia can be manufactured against request.
Grey highlighted items are full threaded
Metric
25
InternationalPart No.
Price/100 Pcs
BoxQuantity
InternationalPart No.
Price/100 Pcs
BoxQuantity
LengthInternational
Part No.Price/
100 Pcs Box
Quantity
M33 M36 M42
758090
100110120130140150160180200220240260280300
170303170304170305170306170307170308170309170310170311170312170313170314170315170316170317170318170319
45,33847,93950,85054,45558,55359,95263,17567,09070,93474,24081,29388,430
106,946114,831123,438132,002140,554
55554444443332222
170320170321170322170323170324170325170326170327170328170329170330170331170332170333170334170335
57,35261,71964,20668,57369,90273,56377,76081,92990,027
104,400113,163135,678145,450155,210164,989198,059
5334333332229887
170336170337170338170339170340170341170342170343170344170345170346170347170348170349170350
90,50895,709
100,939101,716106,012111,912117,798123,692134,928141,033180,902194,329207,797221,239234,672
3222
1010
998776666
Hex Head Bolts/Screws
1. Specifications :2. Threads :3. Material and Mechanical Properties :4. Note :5.
6.
Generally conforming to IS : 1364, ISO : 4014/4017, DIN 931/933. ISO Metric 6g as per IS:4218.
Property Class 10.9 as per IS : 1367.Shaded size are fully threaded. Prices for fully threaded screws beyond shaded sizes will cost 10% extra.
Orders for Property class 8.8 can be accepted subject to our confirmation on the basis of item wise quantities. Price list for 8.8 available separately.
Upto 80MM Dia can be manufactured against request.
Grey highlighted items are full threaded
Important * long delivery items-subject to extended deliveries ( 3 to 4 months ). Users are advised to plan their requirements in advance.
Metric
Hex Head Bolts/Screws
Unbrako
26
LengthInternational
Part No.Price/
100 Pcs Box
QuantityInternational
Part No.Price/
100 Pcs Box
QuantityInternational
Part No.Price/
100 Pcs Box
QuantityInternational
Part No.Price/
100 Pcs Box
Quantity
1/4 5/16 3/8 1/2
1/25/83/47/811-1/41-1/21-3/422-1/42-1/22-3/433-1/43-1/23-3/444 1/44 1/255 1/266-1/2771/28
170351170352170353170354170355170356170357170358170359170360170361170362170363240027240028240029240030
399495450406443450502550604663738812887
1,0221,0341,1031,183
500500500500200200200200200200200200200200200100100
170364170365170366170367170368170369170370170371170372170373170374170375170376170377170378170379170380
532510487532530583715802848939
1,0311,1141,1731,2511,3481,6641,838
500500200200200200200200200100100100100100100100100
857857747902737823930
1,0861,1911,3061,4331,5961,6911,8701,9222,3562,5332,8162,9813,3123,6433,974
170381170382170383170384170385170386170387170388170389170390170391170392170393170394170395170396170397170398170399240034240035240036
200200200200200200100100100100100100100
505025252525505050
170400170401170402170403170404170405170406170407170408170409170410170411170412170413170414170415170416170417170418170419240037170420170421170422
100100100100
5025252525252525252525252525252525202525
1,6091,5961,6951,8782,0032,1692,3612,6072,7763,0053,3713,6153,7393,9354,0994,3534,7425,1806,3247,6789,432
11,53612,36313,187
1. Specifications :2. Threads :3. Material & Mechanical Properties : 4.Note :
:
Generally conforming to ANSI B 18.2.1 for BSF BS : 1083 Unified Coarse, 2A as per ANSI B1.1. For BSF BS : 84.
Grade 8 as per SAE J 429 for BSF BS : 1083.Non-shaded sizes if required in full thread will cost 10% extra. BSF threading will cost 15% extraUpto 4 Inch Dia can be manufactured against request.
Grey highlighted items are full threaded
Inch
Hex Head Bolts/Screws
27
Unified Coarse, 2A as per ANSI B1.1. For BSF BS : 84.Grade 8 as per SAE J 429 for BSF BS : 1083.
Non-shaded sizes if required in full thread will cost 10% extra. BSF threading will cost 15% extraUpto 4 Inch Dia can be manufactured against request.
1. Specifications :2. Threads :3. Material & Mechanical Properties : 4.Note :
:
Generally conforming to ANSI B 18.2.1 for BSF BS : 1083
LengthInternational
Part No.Price/
100 Pcs Box
Quantity
5/8
InternationalPart No.
Price/100 Pcs
BoxQuantity
InternationalPart No.
Price/100 Pcs
BoxQuantity
InternationalPart No.
Price/100 Pcs
BoxQuantity
11.1/41.1/21.3/422.1/42.1/22.3/433.1/43.1/23 3/444 1/44 1/255 1/266.1/277.1/289101112
3/4 7/8 1
170423170424170425170426170427170428170429170430170431170432170433170434170435170436170437170438170439170440170441170442170443170444
2,9623,3063,4683,7003,8874,2324,6315,0055,3945,7446,0856,7306,9087,1497,4158,3479,603
10,06611,74412,64813,55113,798
25252525252525252525252525252525201010101010
170445170446170447170448170449170450170451170452170453170454170455170456170457170458170459170460170461170462170463170464170465170466240038
6,0876,3176,7317,3927,7558,4608,7929,1789,921
10,64911,14211,41611,94412,70614,26814,64815,82915,82917,00818,63719,48421,92023,298
252525252510101010101010101010101010101010
88
15,91415,91412,83212,83213,44314,82614,82615,90616,66417,66618,50819,91420,98022,26823,50025,94027,28228,48532,36633,865
170467170468170469170470170471170472170473170474170475170476170477170478170479170480170481170482170483170484170485170486
1010101010101010101010101010
555555
170487170488170489170490170491630407170493170494170495170496170497170498170499170500170501170502170503170504170505170506170507170508170509170510
13,29813,29813,97814,52015,18616,19117,73418,42019,19521,12921,12923,29623,29625,99428,09529,39531,87834,35936,76338,46543,25947,43649,80954,336
101010101010101010101010
555555555444
Inch
Grey highlighted items are full threaded
39
Hex Nuts
Size (mm)
M6 X 1
M8 X 1.25
M10 X 1.5
M12 X 1.75
(M12) X 1.5
M12 X 1.75
(M14) X 1.5
(M14) X 2
M16 X 2
M16 X 2
(M18) X1.5
(M18) X 2.5
M20X 1.5M
M20 X 2.5
(M22) X 2.5
M24 X 3
(M27) X 3
M30 X 3.5
(M33) X 3.5
M36 X 4
M39 X 4
M42 X 4.5
M45 x 4.5
M48 x 5
M52 x 5
M56 x 6
M60 X 6
M64 x 6
M72 X 6
8
8
8
8
10
10
10
10
8
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
550303
550304
550305
550306
170623
170622
170625
170626
550307
170627
170629
170630
170631
170632
170633
170634
170635
170636
170637
170638
170639
170640
170641
170642
170643
170644
550301
170645
550302
129
177
359
552
928
928
1,077
1,077
1,100
1,409
2,012
2,012
2,697
2,710
3,115
4,659
7,523
10,291
14,158
19,238
24,928
30,619
36,580
44,070
54,924
70,993
133,110
141,984
241,500
500
200
200
200
200
200
100
100
100
100
100
100
50
50
50
50
25
25
10
10
10
10
10
10
4
4
3
3
2
9000
2400
2400
1600
2400
2400
800
800
800
800
600
600
300
300
200
200
150
150
80
80
40
40
40
40
16
16
12
12
8
Grade InternationalPart No PRICE Pcs. Per
BoxPcs. PerCartoon
1. Specifications :2. Threads :3. Material Mechanical Properties :4. Note :
For Nuts with Metric Threads IS : 1364, ISO 4032 ISO Metric 6H as per is : 4218, iso 261, iso 965.
Property Class as tabulated as per IS : 1367, ISO 898, Part-II.Size in brackets are non-preferred standards.
Unbrako
40
Hex Nuts
1. Specifications :2. Threads :3. Material Mechanical Properties :
For Nuts with UNC Threads : (ANSI B 18.2.2). Unified Coarse, 2B As Per ANSI B1.1.
Grade as tabulated as per SAE J 995.
Size (mm) InternationalPart NoGrade Price/
100 PcsPcs. PerCartoon
Pcs. Per Box
1/45/163/87/161/25/83/47/811-1/81-1/41-3/81-1/2
8888888888888
142196297678678
14092485335050007434
100161346617398
170646170647170648170658170649170650170651170652170653170654170655170656170657
500500200200200200
50505025252510
900090002400160016001600
400200200150100100
40
8
RAB KONU
Nylock Nut (Din 982, ISO 7040 Grade-8) Blue Ring
Pcs.Per Cartoon
Pcs.Per Box
90002400240024002400
800800800300300
(Duly Mechanical White Zinc Plated)
Size (mm) InternationalPart No
Price/100 Pcs
146263579829880
1,3491,6691,7863,5413,789
5002002002002001001001005050
M6M8
M10M12
M12X1.5M14M16
M16x1.5M20M20x1.5
630448630449630450630451630452630453630454630455630456630457
Unbrako
44
Hexagon Wrenches Sets
1. Specifications :A. Inch Series : B. Metric Series :
2. Material : 3. Mechanical Properties :
BS : 2470UNBRAKO High Grade Alloy Steel.
Hardness : HRC 47 (Min).
IS : 3082, DIN 911.
Length Price/100 Pcs
BoxQuantity
InternationalPart No
1/165/643/321/85/323/167/321/45/163/81/29/165/83/4
108468110164110180110213110246115915115948115981115997116013116046116063116080116096
100100100100100100
5050252510101010
1,0241,1291,1291,1291,3381,7312,3553,4115,6678,383
19,34224,74836,13658,435
Length Price/100 Pcs
BoxQuantity
InternationalPart No
1.522.534568101214171922242732
125648122263122270121093119953122245121066115557120859120806111100138487111133402603402604402605402606
1,0241,0241,0241,1291,7722,1623,0775,7959,671
18,19426,76142,32558,40692,056
123,772208,371366,444
100100100100100100
50502525251010
5522
Standard(Metric)
1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, Set of 9
Sets Wrenches Box Set Price Box
STANDARD (METRIC)
Part No
318402616 50
Standard(Inch)
1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”7/32”, 1/4”, 5/16”, 3/8”, Set of 10
Sets Wrenches Box Set Price Box
STANDARD (INCH)
Part No
334402615 50