understanding check point vpn client · web viewthis section covers how to authenticate to vpn-1...
TRANSCRIPT
UNDERSTANDING CHECK POINT VPN CLIENT 2011
Table of Contents
Pre-Installation Checklist....................................................................................................................................................2
Installing the Check Point VPN Client...........................................................................................................................4
Running and Configuring the Checkpoint Client...................................................................................................11
If you already have sites defined..................................................................................................................................24
1
UNDERSTANDING CHECK POINT VPN CLIENT 2011
Pre-Installation Checklist
You will need the following items before installing the Checkpoint VPN Client
1. eGrid on the computer2. Current version of MacAfee Antivirus
a. This must be installed on the computer BEFORE the Checkpoint VPN software
3. Current version of Checkpoint VPN software
2
UNDERSTANDING CHECK POINT VPN CLIENT 2011
Authentication
This section covers how to authenticate to VPN-1 gateway: Username, Password, and the Entrust eGrid.
This provides secure and cost-effective two-factor authentication by leveraging a security grid card. IdentityGuard users are issued a security grid card that contains a series of numbers and letters in clearly marked rows and columns. The security grid card is issued electronically and called an eGrid. After entering the User Name and Password the user will be prompted for the eGrid coordinates.
3
UNDERSTANDING CHECK POINT VPN CLIENT 2011
Installing the Check Point VPN Client
1. Launch the package installer
2. Click Continue
4
UNDERSTANDING CHECK POINT VPN CLIENT 2011
3. Click Continue
5
UNDERSTANDING CHECK POINT VPN CLIENT 2011
4. Click Continue
5. Click Agree
6
UNDERSTANDING CHECK POINT VPN CLIENT 2011
6. Click Continue
7
UNDERSTANDING CHECK POINT VPN CLIENT 2011
7. Click Install
8. You might receive a flag to request credentials to make changes
8
UNDERSTANDING CHECK POINT VPN CLIENT 2011
9. Click Continue Installation.
10. Click Continue
9
UNDERSTANDING CHECK POINT VPN CLIENT 2011
11. Be sure all information is saved before you click RESTART
10
UNDERSTANDING CHECK POINT VPN CLIENT 2011
Running and Configuring the Checkpoint Client1. Look for the key in the taskbar
2. If there are no sites defined, click YES and read on. If sites are defined, click HERE.
11
UNDERSTANDING CHECK POINT VPN CLIENT 2011
3. Put in the sites in the order below. Add them by name first. If that does not work, add them by IP Address (numeric address)
a. Wtce.fw.fedex.com: 199.81.219.206b. Ctce.fw.fedex.com: 199.81.192.80
12
UNDERSTANDING CHECK POINT VPN CLIENT 2011
4. Authentication Method: Choose User Name and Password
13
UNDERSTANDING CHECK POINT VPN CLIENT 2011
5. Input Username and Password and click Next.
14
UNDERSTANDING CHECK POINT VPN CLIENT 2011
6. Select Advanced and click Next.
15
UNDERSTANDING CHECK POINT VPN CLIENT 2011
7. Advanced Settings: Select Perform IKE over TCP and click Next.
16
UNDERSTANDING CHECK POINT VPN CLIENT 2011
8. Connecting to site
17
UNDERSTANDING CHECK POINT VPN CLIENT 2011
9. You will be asked to validate the site’s fingerprint
18
UNDERSTANDING CHECK POINT VPN CLIENT 2011
10. Put in your eGrid Information and click Connect.
19
UNDERSTANDING CHECK POINT VPN CLIENT 2011
11. Site created, click Finish.
12. Yes, you do want to connect.
20
UNDERSTANDING CHECK POINT VPN CLIENT 2011
13. Put in your Username and Password and click Connect
14. Connecting …
21
UNDERSTANDING CHECK POINT VPN CLIENT 2011
15. Connection Success
22
UNDERSTANDING CHECK POINT VPN CLIENT 2011
16. Client Status
Note the Security Policy is ON. If your Security Policy is OFF you will need to turn it on.
23
UNDERSTANDING CHECK POINT VPN CLIENT 2011
If you already have sites defined
1. Click the key and select Connect.
24
UNDERSTANDING CHECK POINT VPN CLIENT 2011
2. Put in your Username and Password and click Connect
25
UNDERSTANDING CHECK POINT VPN CLIENT 2011
3. It will ask for your eGrid information
26
UNDERSTANDING CHECK POINT VPN CLIENT 2011
4. Connection Success
27
UNDERSTANDING CHECK POINT VPN CLIENT 2011
Defining a new site
1. Click Options
2. Click Settings
28
UNDERSTANDING CHECK POINT VPN CLIENT 2011
29
UNDERSTANDING CHECK POINT VPN CLIENT 2011
3. Click New on the SecureClient Settings screen
4. Select Site
5. Click HERE to jump to Site Creation.
30