user manual 42ep24s

8/6/2019 User Manual 42EP24S

1/33

PLASMA MONITOR


2/33

2 Plasma Monitor

THIS SYMBOL INDICATES THAT HIGH VOLTAGE IS PRESENT

INSIDE. IT IS DANGEROUS TO MAKE ANY KIND OF CONTACTWITH ANY INSIDE PART OF THIS PRODUCT.

WARNING : To reduce the risk of electr ic shock do not remove cover or back.No user-serviceable parts inside refer service to qualified service personnel.

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rule. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installat ion. This equipment generates, use andcan radiate radio frequency energy and, if not installed and used in accordance with theinstruct ions, may cause harmful interference to radio communicat ions. However ,there is noguarantee that interference with not occur in a particular installation. If this equipmen t doescause harmful interfe rence to radio or television reception, which can be determined by turningthe equipment off and on, the user is encourage to try to correc t the interfe rence by one ormore of the following measures:

*Reorient or relocate the receiving antenna.*Increase the separation between the equipment and receiver.*Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected .*Consult the dealer or an experienced radio/TV technician for help.This device compiles wit h Part 15 of the FCC Rules. Operation is subject to the follow ingtwo conditions: (1) This device may be not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesiredoperation.

FCC CAUTION:To assure continued compliance and possible undesirable interference, the provided ferrit ecores must be used when connecting this plasma display to video equipment; and maintainat least 40cm spacing to other peripheral device.

CANADIAN NOTICE:This Class B digital apparatus compiles with Canadian ICES-003 .

RISK ELECTRIC SHOOKDO NOT OPEN

WARNING

Safety of operators has been taken into consideration at the design and manufacturephase, but inappropriate operation may cause electric shock or fire. To prevent the productfrom being damaged, the following rules should be observed for the installation, use andmaintenance of th product. Read the following safety instruction before starting the operation.

The User Manual uses the fo llowing symbols to ensure a safe operation and preventany damage to operators or properties:

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT

OPERATING AND MAINTENANCE INSTRUCTIONS IN THE

LITERATURE ACCOMPANYING THE APPLIANCE.

FCC STATEMENT


3/33

Owner s Manual 3

IMPORTANT SAFETY INSTRUCTIONS Read al l of the instructions before using this appliance. When using this

appliance, always exercise basic safety precautions, including the following:

1)Save these Instruct ions ---the safety and operating instructions should beretained for future reference.

2)All warning on the appliance and in the operating instructions should be followed.

3)Cleaning --- Unplug from the wall outlet before cleaning. Do not use liquid

cleaners or aerosol cleaners. Use only dry cloth for cleaning.

4)Attachments -- -do not use attachments not recommended by the manufacturer

as they may cause hazards.

5)Water and moisture -- do not place this product near water, for example, near a

bathtub, wash bowl, k itchen sink, laundry tub, in a wet basement, or near a

swimming pool.

6)Accessor ies -- -do not place this un it on an unstable cart, stand, tripod, bracket,

or table. Use only with a cart, stand, tripod, bracket, or table recommend by the

manufacture, or sold with the unit .

7)Venti lation ---Slots and openings in the cabinets and the back or bottom are

provided for ventila tion. These openings must not be blocked. In a built in

installation such a bookcase or rack do not install product unless proper ventilation

is provided.

8)Power Source ---this monitor should be operated only from the type of power source

indicated on the rating label. If you are not sure of the type of power supply to your

home, consult your appliance dealer or local power company.

9)Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding type plughas two blades and a third grounding prong. The wide blade or the third prong are

provided for your safety. If the provided plug does not f it into your outlet, consult an

electrician for replacement of the obsolete outlet. To prevent electric shock, ensure

the grounding pin on the AC cord power p lug is securely connected.

10)Power cord protect ion -- -Power supply cords should be routed so that they are

not l ikely to be walked on or pinched by items placed upon or against them. Pay

particu lar attention to cords or plugs, convenience receptac le, and the point where

they exi t from the appliance.

11)Light ing precaution ---for added protection for this product during a light ing

storm or when i t is le ft unattended for long per iod of time, unplug it from the walloutlet and disconnect the antenna or cable system. This will prevent damage to the

product due to lighting and power line surges.

12)Never push objects of any kind into this product through openings as they may

touch dangerous voltage point or short out parts that could result in a fire or electric

shock. Avoid spill ing liquid of any kind on the product.

13)Servicing -- -do not at tempt to service the product by yourself, as opening or

removing covers may expose you to dangerous voltage or other hazards. Refer all

servicing to authorized service personnel .

14)Unplug this unit from the wall outlet and refer servicing to quali fied service

personnel under the following conditions:a. When the power supply cord or plug is damaged or f rayed.


4/33

4 Plasma Monitor

b.If liquid has been spilled, or objects have been fallen into the unit.c.I f the un it has been exposed to rain or water.d.If the unit does not operate normally by following the operating instructions.Adjust only those controls that are covered by the operating instruct ions, as

improper adjustment of other controls may result in damage and will oftenrequire extensive work by a qualified technician to restore the unit to its normaloperation.

e.I f the unit has been dropped or damaged in any way.f.When the unit exhibits a distinc t change in performance; this indicates a needfor service.

15)Heat --- The product should be situated away heat source such as radiators , heatregisters, stoves, or other products (Including amplifiers) that product heat.16)Overloading - --Do not overload wall outlets and extension cord as this can resultin a risk of fire or electric shock.

SAVE THESE INSTRUCTIONS

Thank you for using our Haier product . This easy-to-use manual will guide you ingetting the best use of your product. Remember to record the model and serialnumber. They are on label in back of the unit .

Model number

serial number

Date of purchase

Staple your receipt to your manual.You will need it to obtain warranty service.


5/33

Owner s Manual 5

Warning..............................................................Safety Instructions............................................

InstructionControls.......................................................Connection Options.......................................Remote Control Key Functions ................ .......Installing Batteries........................................

InstallationInstallation instructions................................VCR Setup/ ................. .........External A/V Source Setup............ ...............DVD Setup..................................................DTV Setup/Monitor Out Setup.......................PC Setup....................................................Install the Speakers.....................................Install the Stand...........................................Install the Stand to the PDP......................... ..

OperationTurning the Monitor On............... ..................Basic Function

Saving Mode............................................Operation Menu........................................Sound Mode.............................................Picture Mode............................................Sleep Timer..............................................

AV1/S-Video/YP bPr/YCbCr/VGA /DVI Play..Picture Quali ty Adjust

Sound Adjustment........................................

Function SetupFuntion Setup...........................................Menu Language Option.............................Menu Time Out Option.................. ............Menu Background Option..........................Auto Off...................................................Close Caption..........................................Calendar Display and Check.................. ...Parental..................................................

Time Setup.................................................Lock Menu Options

Lock Setup..............................................

Cable TV Setup

AV1/S-Video/YPbPr/YC bCr/VGA Menu.....DVI Menu.................................................

Adjustment Setup........................................

Change Password.....................................26Preset Prog.............................................. 27

Source Lock............................................. 27Child Lock................................................ 27Max Volume..............................................27Unlock..................................................... 27

Screen Menu Options................ ................... 28Troubleshooting Checklist.................................... 29Maintenance....................................................... 30

Product Specifications......................................... 31

2

3-4

6

7

8

9

10

11

11

12

13

16

17

17

17

18

18

18

19

20

21

22

23

23

23

23

24

24

25

26

14

15

15

23

8

23


6/33

EXIT INPUT MENU

Signal sourc e input option

Down/Up. Sel ct desired option on the menue

VOLUME Buttons

MENU Button

Power On/Off Button

Remote Control Sensor

illuminates red in standby mode,ill uminates blue whenthe display is turned on

MENUVOL+CH+CH-INPUTEXIT VOL-

Power Standby Indicator

Menu exit

6 Plasma Monitor

VOL VOL


7/33

AC-INPUT

DVI

VGA

L-AUDIO-R

AV IN

S-VIDEOVIDEOL-AUDIO-R

AV OUT

VIDEOAUDIO

DVI IN

AUDIO

VGAIN

COMPONENT IN

Pr/Cr Pb/Cb Y L-AUDIO-R

LR

AUDIO OUT

SWITCH

VGA Input/A udio input

DVD/DTV InputConnect a c omponent video/audiodevice to these jacks

DVI Input/Audio inputconnect your cable/PCthrough the input

Audio/Video InputConnect audio/videooutput from an externaldevice to these jacks

S-Video Input

Power Cord SocketThis monitor operates on AC power.The voltage isindicated on the specifications page. Neverattempt to operate the monitor on DC power

Earphone port

0

Power On/Off

Owner s Manual 7

External audio/video output

AUDIO output


8/33

When using the remote control. Aim it towards the remote sensor on the monitor.

VIDEO INPUT POWERPC

AUTO DVI MUTE

EXITAVC

DISPLAY

DNRMENU

/

LOCK CALENDAR

CC

RATING FREEZESURROUND

ARC

ENTER

Q SET

SLEEP

PC

Select AV/S-Video sourceVIDEO

Selects:AV1/S-Video/YPbPr/YCbCr/VGA/

INPUT

POWER

Press this key to set sleeptimer.

MUTESwitches the sound on or off

NUMBER buttons

Picture mode menu display

Auto volume control On/Off

Sound mode m enu display

Bring up the main menu to the screen

P STD

LOCK

SURROUND

EXIT

Q SET CC(Closed Caption)

P STD

S STD

VOL+

VOL-

321

Select PC source

DVISelect DVI source

MENU

LEFT/RIGHT

ENTERPress to confirm the selection

S STD

/

SLEEP

FREEZE

ARC

Changes the as pect ratio

CALENDAR

VOLUME UP/DOWNIncreases/decreases soundlevel

the

UP/DOWN

Clears all on-screen displaysand return to viewing fromany menu

AVC

DNR

V-chipParental Control

AUTO

DISPLAY

Digital noise reduction

Auto adjust for PC

Press to select left/right/stereotrack

Press to sel ect surround ON/OFF

Press to enter the Lock Set menu

Select differ ent modes

DVI input source

Turn your monitor on

8 Plasma Monitor

Displays the current inputsignal information

Freezes the im age on the screen

Selects pre-set user preferencesfor audio and video settings


9/33

V IDEO INP UT P O W E RPC

AUTO D V I M U TE

EXITAVC

DISPLAY

DNRMENU

/

LOCK CALENDAR

CC

RATING FREEZESURROUND

ARC

ENTER

SAVING

SLEEP

P.STD

S.STD

VOL+

VOL-

Speaker unit(X2)

(2.5MX2)

Connection cord (

1 M4X12 x8Screws 4 x1Assembly instruction

5 x1Stand

6 brac e pol e x 2

2 M4X8 x2Screws 3 M5X16 x4Screws

7 PMMA baff le x1

Owner s Manual 9


10/33

So you s hould not connect to

S-Video i f you want to use Video.

(If you hav e a digit al cable box please refe r to page 12 , forDTV setup)

10 Plasma Monitor

Do not leave a still picture from a VCR on the screen for a long time. Ifthe 4:3 format is used, the fixed images on thesides of the screen may remain visible on the screen, if this format i s used day after day. This is known as burn-in, itis uneven wear of the screen area. Reduce contrast when displaying fixed images on the screen for a long tim e.


11/33


12/33

VGA

AV

Also,you could use shortcut key such as PC,DVI on the remote control)

12 Plasma Monitor


13/33

Also,you could us e shortcut key such as PC,DVI on the remote control)

Owner s Manual 13

,if nec essary.

The synchroniz ation input from horizontal and vertical frequencies are separate.


14/33

Before turning on the PDP , ensure you have connected the line be tween the speaker and the PDP

1 Face the PDP screen upside down on a clean blanket or a bracket and pay attention not to indent the casing. (See figure),

lay the two speaker asi de of the PDP.

3 Fix the speaker to the PDP with the screws 4-ST 4X16 .

2 Insert the pothook to the faucet of the PDP screen .

Connect the speaker to the speaker terminal of plasm a screen:

Press the speaker terminal and insert the connecting cable into the t erminal slot.

Release the speaker terminal and ensure that the white connecting cable is inserted i n the terminal slot marked red and black connecting

cable is inserted in the bl ack terminal s lot, and that anode and cathode poles are correctly connected. (See Figure )

25.4 00\U+2 592\U+255 A\U+2514\ U+00B2

The left speakerThe right speaker

\U+25 92\U+255A \U+2514\ U+00B225.4 00

R L

EXT SPEAKER

Install the Speakers

14 Plasma Monitor


15/33

Install the brace pole

M4X8rom the front .

1 After put the brace pole to the stand,

use the screw 8 M4x12 to fix it.

2 Take care not to touch the stand and

the brace pole;

3 Fix the PMMA baffle with the

screw 2

Install the PMMA Baffle

After installing the brace pole(see figure below)

baffle

and put the baffle into the stand.

rip the pr otective sheet off of the PMMA

Instal l the Stand

Face the PDP screen upsi de down on a clean blanket or the bracket and pay attention not t o indent the casing. (See figure)

Lay down the stand and put it to responding position of the PDP screen ,and make sure the brace pole towards the hole of the PDP .

Fix 2 PDP brace pole to the PDP on the back of the plasma displ ay with 4 M5X16 screws.

Install the Stand to the PDP

Owner s Manual 15


16/33

16 Plasma Monitor


17/33

Basic Function

Saving Mode

Quick Set Setup

Light Sound

Bright Noise

Normal Normal

Gray Quiet

Dark

Hold Q S ET button pressed on the remote f or 3 seconds until Quick Set mode setup menu appe ars on the sc reen.

1.Press button for desired setup option.

2.Press button for setup option.

3.Press Q SET button (Screen display sees right figure)

4.Press EXIT button to close screen display.

(10 seconds later after the l atest press, the screen display wi ll disappear automatically.)

Operation Menu

1.Press MENU button to open the main menu. Press button to select PIC., SOU., ADJ., SYS. , FUN. or TIME menu.

2.Press button to select submenu, and press button to increase/decrease the value or select the setup.

4.The setup t ime in display will disappear autom atically wh en the latest preset time expir ies. The menu display time can

be set to 5,10,15,20,25,30 and 40 seconds

5.Press EXIT button to exit any menu if the menu is in display.

Sound mode

Press S STD button on the remote controller for menu display, and press button to change

the mode as follows:

Music Standard Theater Personal

Basic Function

/

/

/

/ /

/

3.Press M ENU to return to mai n menu

(This feature can also be changed from the sound menu function screen)

Owner s Manual 17

Sou.Mode

Music

Standard

Theater

Personal


18/33

Picture mode

Press P STD button on the remote controller for menu display, and press button for desired

mode as follows:

Bright Normal Soft Personal

Sleep Timer

Every pres s of SLEEP button, the timer will be set in the following sequence:

S leep 0Min S leep 5Min S leep 15Min S leep 30Min S leep 60Min S leep 90Min S leep 120Min S leep 0Min

If remaini ng time of set tim er is to be displayed, press the SLEEP button once.

AV1/S-Video/YPbPr/YCbCr/VGA/DVI Play

1. Press INPUT button on the remote contr oller, the following menu will appear on the screen.

Source

AV1/S-Video

YPbPr/YCbCr

VGA

DVI

2. Press button for option and then press button or ENTER to confirm.

Note: If AV1 and S-Video are inserted at the same time, priority will

be given t o S-Video.

/

/ /

(This change can also be m ade from Pic ture menu adjustment screen)

18 Plasma Monitor

Pic.Mode

Bright

Normal

Soft

Personal


19/33

Picture Quality Adjust

Picture quality adjust

Picture quality c an be adjusted for any input separately.

The picture quali ty on the screen can be adjusted as follows:

1. Press MENU button and until the following menu appears on the screen:

AV1/S-Video menu:

(Not available)

(not available)

B

C

A

YPbPr/YCbCr menu:

(Not available)

VGA menu:

Picture Quality Adjust

50

50

50

0

50

B

C

A

50

50

500

50

B

C

A

50

50

50

0

50

Owner s Manual 19

/

(Not available)


20/33

Picture quality adjust

DVI menu:

(not available)

(not available)

3. Press button again to adjust selected option.

Note:

1.When Personal mode is not selected, the Personal mode can be entered automatically if Contrast, Brightness,

Color, Tint and Sharpness parameters are adjusted.

2.Noise Reduction mode DNR can be set to Auto, Off, Weak, Medium or Strong.

B

C

A

50

50

50

0

50

/

/

20 Plasma Monitor

2.Press button to enter picture menu and to select desired option , the current item is marked yellow.

4. Repeat step 2 and 3 until des ired pic ture quality ha s been achieved . When displayed time for menu setup expires without

any operation , the menu disappears from the picture , If MENU or EXIT button is pressed , the menu on display will disappear

in sequence or immediately respectively.


21/33

Sound adjustment

Sound adjust

1. Press MENU button and button until the following menu appears on the screen.

B

C

A

2. Press to enter sound setup menu, and press button

again for des ired option.

3. After your option is selected, press button to adjust.

Note:

1. Selec t Balance to balance r ight and left sound channels of the monitor . The intermediate value is 0. When

indication v alue of Balance increases toward +50, sound of the right and left speaker becomes stronger and weaker,

respectively. When indic ation valu e of Balanc e decreases toward -50, s ound of the right and left speaker becomes

weaker and stronger, respec tively.

2.When Personal mode is not selec ted, the Personal mode can be entered automatically if Treble or Bass parameters are

adjusted.

Sound adjustment

/

/ /

/

3.AVC:Automatic Volume Control. his feature maint ains a fixed volum e for different levels of programmateri al, like l oud

commercials.

Owner s Manual 21

Sound can be adjusted for any input as f ollows:

4. Repeat step 2 and 3 until des ired sound has been achiev ed

when displayed time for menu s etup expires wi thout any

operation , the menu disappears from the picture . If MENU

or EXIT button is pressed , the menu in dis play wil l disappear

in sequence or immediately respectively.


22/33

Adjustment Setup

Adjusting setup

When VGA DVI input mode is set

B

C

A

1. Press MENU button on the remote controller and for

option of picture position adjust.

2.

3. Press button for desired adjust parameter option.

4. Press for desired adjust parameter option until

satisfactory value is achieved. When VGA signals are

received, the autom atic mode is used for parameter adjustment.

Note:

Adjus t, RGB and Reset are functi onal only under VGA and DVI mode, and Auto Sync is f uncti onal in VGA mode.

Adjustment Setup

/

/

5) Under the VGA signal, there are Full Screen , one to one and

4:3 Mode for Display mode to select.

Under the AV1or S-Video s ignal, there are Full Screen,

Vertical Zoom, Half Zoom, Panorama and 4:3 Mode for

Display M ode to select.

Under the DV I signal, ther e are Full Screen and 4:3 Mode for

Display M ode to select.

Press to enter the menu of picture position setup

1)Adjust is opted for adjusting H Position and V Position as well as relativ e

parameters in V GA and DVI modes.(Phas e Adjust is not

available in DVI)

B

C

A

2)RGB is opted for adjustment of the numerical value of red,

green and blue in VGA/DVI mode.

3)Reset is opted for adjustment of parameters (After the

operation, Com plete will be on the right of the option)

4)Auto sync is opted for adjustment of picture location freque-

ncy and phas e parameters in VGA mode.(Not avai lable in

DVI)(After the operation, Complete will be on the right of

the option)

B

C

A

00

0

0

0

0

0

0

/

/

Notavailable

22 Plasma Monitor

6) Color Temperature is opted for color parameters of cold,

normal and warm.

In VGA and DVI input mode , H Posi tion and V Posi tion c an be used to

adjust the pic ture position.


23/33

Function Setup

Function Setup

It is pos sible to select language, OSD transluc ent, position and screen display of the menu as follows:

1. Press MENU button once, and the button until the following menu appears on the screen:

B

C

A

2. Press button on the remote controller to enter the menu of system setup.

3. Press to select desired option on the menu.

4. Press to adjust selected option.

Menu language option

Repeat step 3 and 4 to select Engl ish, Francai s or Espanol as the menu l anguage.

Menu timeout option

Repeat step 3 and 4 to select menu display time for 5,10,15, 20, 25, 30 or 40 seconds.

Menu Background Option

Repeat step 3 and 4 t o select OSD backgr ound between Transl ucent and Opaque.

Close Caption

Repeat step 3 and 4 to set up Off/CC1/CC2/CC3/CC4/TX1/TX2/TX3 /TX4/XDS.

Function Setup

Owner s Manual 23

/

/

/

Auto Off

Repeat step 3 and 4 to selec t On/Of f. If , and there is no signal to the moni tor for 2 minut es ,

the moni tor will be in standby condi tion . If Off is , and there is no signa l to the

monitor for 3 minutes without any operation , Haier will be on the screen .

On is selected Auto Off will

be on the screen and for 3 minutes selected

/

(Note: Close Caption is only avai lable in AV and S-Video signal)


24/33

Calendar Display and Check

Repeat step 3 and press or ENTER button to enter calendar menu as follows:

Enter Calendar menu, press and button to adjust or check the date.

Parental

Designate and press or ENTER button to enter Parental submenu as follows:

Select option 3 and 4 on the menu, enter the submenu as follows:

G VPG VPG-13 VR VNC17 VX V

TV Rating Limit

Movie Rating LimitRat ing ALL V S L DTV-Y VTV-Y7 V VTV-G VTV-PG V V V V VTV-14 V V V V VTV-MA V V V V

Note: If some option is locked, the options of the same level will also be locked and the screen display s Lock .

24 Plasma Monitor

/

/ /

The password here will also change

Initial password is 0000, and security default password is 9443. If the password in the Lock Set menu changed, the password

(Parental is only available in AV and S-Video signal)

TV Rating Limit and Movie Rating Limit can only be opted when Parental Control is set to Custom.


25/33

Time Setup

If Off-time or On-time is intended in AV1/S-Video/YP bPr/YCbCr/VGA , follow the instructions as below:

B

C

A

2.

Note:

Indication wi ll appear on the screen 1 minute prior to expirati on of the set ti me.

Time Setup

If Clock is set, time you set fo r Off Time and On Time wi ll be

a point of time. Other wise, if Clock is not set, tim e you set

for Off Time and On Time will be a period of time. And it will

account time from the time when you set aut omatically .

/1.After choosing the time function from the main menu,press to select the clock ,then press to adjust./

Owner s Manual 25

The Sl eep Time and Off Time can not be set at simu ltaneously . If both ti me are set , the later setup will be in

operation.


26/33

Lock setup

Change password

1.The password can be changed. Press button and select

Password. Press or ENTER button, the screen will display

Old Pw.- ---, which wil l stay on the scr een if a wrong password

is entered. If correct password is entered, the screen will

display New Pw.----. Then enter the new password, and the screen will display

Confirm----. If the same password is entered correctly twice, the old password will be changed. If the sam e password

is not correctly entered twice, t he screen wi ll dis play New Pw.--- -, then you have to reenter the password.

Note:

The initial password is 0000, and t he security default passwor d is 9443. If Unlock is activated, the password setup

cannot be changed.

Caution:

The monitor has the function of security default lock . Password needs to be entered when the program lock mode is

to be set. The initial password of the monitor is0000 and security default password i s 9443.

Change password

Press digi t button on the rem ote control to enter the digits.

Lock Menu OptionsLock Menu Options

/

/

Press LOCK button on remote c ontrol, Password wi ll appear on the screen. If password is correctly entered, the Lock set menu will be

menu willl be entered. If the password is not correctly entered, you will be required to reenter the password and t he cursor wi ll stay

stay at the first place. Press EXIT to erase the window. If time you set in OSD menu expires after th e latest press, the menu

will disappear automatically.

26 Plasma Monitor


27/33

Preset Prog.

Preset Prog. is opted for setting up start signal resource. Press button to select Preset Prog.. Press

monitor is switched off and on again.

Source Lock

Source Lock is opted to hinde r external input modes, such as AV, S -Video and VGA. Press button to selec t

the option, and press or ENTER button to display Source Lock menu

Press button to select desired option. Press button to set up the mode of

Source Loc k. If some Source Loc k is set on, the mode will be entered and the screen

on mode, when screen is blank, icon Lock will be always displ ayed on the scr een

If lock mode is to be verified, enter Source Lock submenu and set relati ve mode off

or select Unlock mode in the Preset Prog. Menu.

Child Lock

Max Volume

Press button to select Max Volume. Press button for adjustment between 0 100. If a

certain value is set, when vol ume is being adjusted, the sound val ue cannot exceed m aximum volume value. If currentvolume is over Max Volume, when Lock Set menu is set, current volume wil l become set maximum volume. If current

Unlock

Press button to select Unlock mode. Press or ENTER button to unlock all set modes, setting all lock options to off,

and the maximum volume returns to 100.

entered if the

/

/ /

/ /

/ /

volume is bel ow maximum vol ume, customer set volume will stay unchanged

/

/

/ /

will di splay blue background with the mute mode activated and Lock. In lock on

Press button to select Child Lock. Press button to set On or Off mode. If lock on mode is set, Child Lock is

inactivated automati cally. In such case, If buttons on monitor are pressed, the screen will displ ay Child Lock, which

can be erased by press of EXIT button. 5 seconds later after the latest press, the screen display will disappear auto-

matically. The Child Lock mode can be resumed by entering Lock Set menu to set Child Lock off or active Unlock.

Owner s Manual 27

/

button, sources can be swapped in AV1/SVideo/YPbP r/VGA/DVI/Off mode. After setup, the set mode will be entered if the


28/33

Auto sync

/

/

/

Auto Sync

Auto Sync a better qual ity picture

Auto

Sync . try Auto Sync again.

/

/ Adjust

/ to enter the submenu

/ select one option and then press to adjust/

5. Press MENU or EXIT to exit it.

Full sc reen( correspond with 16:9)

4:3 Mode

4:3

Full Screen

One to one

One to one real (Only available in PC signal, especial for 800X600

mode and modes of unde r it )

Vertical Zoom

Vertical Zoom adjust the picture vertically,that is without any back bars

Half Zoom

Choose Half Zoom when you want to enlarge the picture vertic ally by enlarge top of the picture, that is the letters on thebottom are stil l on the screen.

Panorama

Choose Panorama when you want to enlarge the two sides of the picture in a non-linear propor tion.

Auto Sync

Note: It is bett er to use Reset instead of Auto sync in 480P,720P,1080i,

28 Plasma Monitor

Note: The setting of aspect ratio is respectiv e in different signal source , that means different aspect ratio could be savedin different source

This is c alled burn-in.

or ENTER


29/33

/

monitor

Owner s Manual 29


30/33

30 Plasma Monitor


31/33

Dimensen(WXHXD)Unit::inches/mm(main compoment)

41.3X3.4X26.1/1050X664X86

60.6/27.5

852X480(Dot)

42EP24S

Speakers

Impedance

Inputconsumption

8

2X10W

120V~ , 60Hz

Size(WXHXD)(inches/mm)

Weight(pounds/kg)

4.3X21.9X2.4/110X556X62

2X5.5/2X2.5

Owner s Manua l 31


32/33

This Haier brand product, when shipped in itsoriginal container, will be free from defectiveworkmanship and materials, and Haier agreesthat it will, at its option, either repair the defect orreplace the defective product with a new or

re-manufactured equivalent at no change to thepurchaser, for parts or labor for the periods setforth below.

This warranty does not apply to the appearanceof the product or the exterior of the product,which has been damaged or defaced, altered ormodified in design or construction. It does notapply to the additional excluded items set forthbelow.

The warranty commences on the date the itemwas purchased and the original purchase receiptmust be presented to the authorized servicecenter before warranty repairs are rendered.

The limited warranty described herein is inaddition to whatever implied warranties may begranted to purchasers by law. ALL IMPLIEDWARRANTIES INCLUDING THE WARRANTIES OFMERCHANTABILITY AND FITNESS FOR USE ARE

LIMITED TO THE PERIOD(s) FROM THE DATE OFPURCHASE. Some states do not allow limitationson how long an implied warranty lasts, so theabove limitation may not apply to you.

Neither the sales personnel of the seller nor anyother person is authorized to make anywarranties other than those described herein, orto extend the duration of any warranties beyondthe time period described herein on behalf ofHaier.

The warranties described herein shall be the soleand exclusive warranties granted by Haier andshall be the sole and exclusive remedy availableto the purchaser. Correction of defects in themanner and for the period of time described

herein shall constitute complete fulfillment ofobligations and responsibilities of Haier to thepurchaser with respect to the product and shallconstitute full satisfaction of all claims, whetherbased on contract, negligence, strict liability orotherwise. In no event shall Haier be liable, or inany way responsible, for any damages or defectsin the product which were caused by repairs orattempted repairs performed by anyone otherthan an authorized service center or dealer, norshall Haier be liable, or in any way responsible,for incidental or consequential economic orproperty damage. Some states do not allow theexclusion of incidental or consequential damages,so the above exclusion may not apply to you.

THIS WARRANTY GIVES YOU SPECIFIC LEGALRIGHTS. YOU MAY ALSO HAVE OTHER RIGHTSWHICH VARY FROM STATE TO STATE.

Warranty period for this product: 90 days for

labor, one year for parts, in home service.Additional items excluded from warrantycoverage: non-rechargeable batteries.What to do to obtain service or to obtain productliterature, accessories, supplies or customerassistance: Simply call 1-877-337-3639.Be sure to have proof of purchase.

WARRANTY


33/33

user manual 42ep24s

Documents