user manual mts200c

MBrowse USB Modem (User Manual)

SW-MTS-200C-UG-V3.2

Dec 15. 2009


2/24

Contents

1. Safety Precautions ..................................................................................................................................4

1.1 The Terminal .....................................................................................................................................4

1.2 The RUIM...........................................................................................................................................4

2. Before Usage ...........................................................................................................................................5

2.1 Minimum system requirement .......................................................................................................5

2.2 Be cautious when separating USB extension cable from your PC.......................................5

2.3 Do not remove RUIM card while connecting to Internet.........................................................5

2.4 Keep RUIM card safe from damage.............................................................................................5

3. Basic Usage .............................................................................................................................................6

3.1 Key Features.....................................................................................................................................6

3.2 View of MBrowse USB Modem .....................................................................................................6

3.3 RUIM Card Usage ............................................................................................................................7

4. Getting Started.........................................................................................................................................7

5. LED Indicators (In Modem Mode) ..........................................................................................................8

5.1 POWER...............................................................................................................................................8

5.2 IDLE ....................................................................................................................................................8

5.3 BUSY ..................................................................................................................................................8

6. Program Installation................................................................................................................................9

6.1 Minimum System Requirement......................................................................................................9 6.1.1 PC Hardware ..............................................................................................................................9 6.1.2 Operating System......................................................................................................................9

6.2 USB Driver Installation (Windows XP/2000)................................................................................9

6.3 USB Driver Installation (Windows Vista) ...................................................................................10

6.4 USB Driver Installation (Windows 7)..........................................................................................10

6.5 Check Installed Driver...................................................................................................................11

7. Using MBrowse USB Modem Program ...............................................................................................12

7.1 Run and Exit...................................................................................................................................12

7.2 Descriptions for each button.......................................................................................................13

7.3 Descriptions for each icon...........................................................................................................13

7.4 Setting Menu...................................................................................................................................14

7.5 Connecting and Disconnecting the Internet .............................................................................16

7.6 Voice Call Menu .............................................................................................................................17

7.7 SMS Menu .......................................................................................................................................18

7.8 Phonebook Menu ...........................................................................................................................21


3/24

7.9 RCV / STV Activation Menu.........................................................................................................22

7.10 Help Menu .....................................................................................................................................22

8. Troubleshooting ....................................................................................................................................23


4/24

1. Safety Precautions

1.1 The Terminal 1) Do not disassemble or solder the terminal and RUIM

Fire, injury, electric shock or malfunction may result.

2) Keep the terminal away from the water

Take care not to use the terminal and RUIM in areas where they could get wet.

3) Do not use or leave the terminal and RUIM in places with a high temperature such as near a

Fire or heater, or places exposed to direct sunlight or in cars under the blazing sun.

Deformation, malfunction, heating the deterioration of performance may result.

4) Do not use near places such as gas stations where there is danger of fire or explosion.

If used where there are flammable gases such as propane, gasoline, Explosion or fire may result..

5) Do not throw the terminal or RUIM, or subject them to severe shocks.

Malfunction may result.

6) Keep out of reach of baby and infant.

Accidental swallowing or injury may result.

7) Do not store the terminal or RUIM in humid or dusty place or in hot areas

Malfunction may result.

8) Turn off the terminal in place where use is prohibited such as an airplane or hospitals.

Electronic and electronic medical appliance may be adversely affected.

9) Turn off the PC into which the terminal is inserted in place near high-precision electronic

Device or device using weak electronic signal.

The terminal may possibly cause these devices to malfunction.

1.2 The RUIM 1) Do not use excessive force to remove the RUIM.

2) Do not put excessive force on the SD card when inserting it into the terminal.

3) It is normal for the RUIM to become warm during use. You can continue to use it even

when it is warm.

4) Always keep the IC portion of the RUIM clean.

5) Clean the RUIM with a soft, dry cloth (Lens cleaning cloth)

6) To protect the environment, please bring the old RUIM to an A/S center.

7) Avoid extreme temperature.

8) Do not scratch, touch carelessly or short circuit the IC portion.

9) Do not drop or give shock to the RUIM.

10) Do not bend or put heavy things on the RUIM.


5/24

2. Before Usage

2.1 Minimum system requirement

CPU and Memory PC-AT compatible and 128MB RAM or more

Interface USB1.1

Operating System. Windows 2000 / XP / Vista

2.2 Be cautious when separating USB extension cable from your PC When removing USB extension cable while connecting to Internet, close the connection and then

remove USB extension cable. Removing USB extension cable while connecting to Internet may result

in malfunction of your modem

2.3 Do not remove RUIM card while connecting to Internet This may result in malfunction of modem and RUIM card.

2.4 Keep RUIM card safe from damage. Keep RUIM card safe with caution from the damage caused by user’s misuse.


6/24

3. Basic Usage

3.1 Key Features

* This modem is for a portable high-speed internet that uses the CDMA network.

Product Name MTS-200C

Antenna Type Inner antenna Type

Data Speed Max 153Kbps(DL)/153Kbps(UL)

Operating System Windows 2000 / XP / Vista

3.2 View of MBrowse USB Modem

Status L

Power On/O

Connection St

ED

ff &

ate

RUIM Card

and SD Card Slot.

USB Connector


7/24

3.3 RUIM Card Usage

You can install the RUIM Card and SD Card by inserting it in the modem as seen below. The Ca

rd Cover slides off, and locks in place when pushed back.

Card cover

4. Getting Started

- Insert R-UIM Card

- Insert SD Card (optional)

- Read Quick Start Guide

- Keep slider switch on the device in Modem position or Memory position as desired.

- Connect to standard USB Connector


8/24

5. LED Indicators (In Modem Mode)

5.1 POWER

Mode Descriptions RED Power On

5.2 IDLE

Mode Descriptions

BLUE Idle status

5.3 BUSY

Mode Descriptions

BLUE/RED Blink Busy


9/24

6. Program Installation

6.1 Minimum System Requirement 6.1.1 PC Hardware

• Recommend to use PC/Notebook at speed of 300 MHz or higher.

Minimum 233 MHz Speed required,

• Intel Pentium/Celeron products, AMD K6/Athlon/Duron products or compatible processors

• Recommend to use 128MB RAM or higher, Minimum 64MB of memory must be used,

(But in this case the performance will be degraded and certain features will be limited.)

• At least 100 MB of free hard disk space is required.

• Mother Board or PCI card that supports USB.

• Video adaptor with Super VGA (800 x 600) or higher resolution and Monitor

• Keyboard and Mouse

6.1.2 Operating System

Windows XP Home or Professional (with Service Pack 2)

Windows 2000 (with Service Pack 4 for optimal performances)

Windows Vista / Windows 7

< Recommended parameters >

Windows Update: Keep your computer up to date

6.2 USB Driver Installation (Windows XP/2000)Refer to the Quick Start Guide and install the modem to PC’s USB port. To check if the driver is installed

properly in “Device Manager”, see the followings in the “Device Manager”

[Start � Control Panel � System � Hardware Tab � Device Manager]

You should be able to see “AnyDATA CDMA USB Modem” and “AnyDATA CDMA USB Serial Device”,

the driver has been successfully installed.


10/24

6.3 USB Driver Installation (Windows Vista) Refer to the Quick Start Guide and install the modem to PC’s USB port. To check if the driver is installed


[Start � Control Panel � System and Maintenance � Device Manager]



6.4 USB Driver Installation (Windows 7) Refer to the Quick Start Guide and install the modem to PC’s USB port. To check if the driver is installed


[Start � Control Panel � System and Maintenance � Device Manager]




11/24

6.5 Check Installed Driver 1) Start [Control Panel]

2) Double click on [System] icon 3) Select “Device Manager” from Hardware Tab.


12/24

4) “AnyDATA CDMA USB Modem (PID 6502)” will be under [Modems].

5) “AnyDATA CDMA USB Serial 1 (DIAG) Device (PID 6502)” will be under [Ports (COM & LPT)].

6)“AnyDATA CDMA USB Serial 2 (NMEA) Device (PID 6502)” will be under [Ports (COM & LPT)].

7. Using MBrowse USB Modem Program

7.1 Run and Exit

1) To run the MBrowse program, double click on the [MBrowse USB Modem] icon on the Desktop.

2) To exit from MBrowse program, Press button on the program


13/24

7.2 Descriptions for each button

Display Function

Disconnected from the Internet

Connected to the Internet

RCV/STV Activation

Setup Menu

Voice call menu

SMS menu

Phonebook Menu

Help Menu

Sending message

Make a voice call

Disconnect a voice call

Erasing one character on the screen

7.3 Descriptions for each icon

Display Function

RSSI Signal Strength Indicator

Calling Possible

Calling not Possible

New message arrived.

Voice Mail arrived.

Voice Mail and New Message arrived.

Only 1X mode available

USB connected

Roaming


14/24

Connected to the Modem Either the cable is disconnected to the modem

Or improper port connection.

Internet connected

Internet disconnected

Read Message

Unread Message

Sent Message

Voice Privacy

7.4 Setting Menu

There are 5 sub-menus for setting.

To change the value, check wanted item box to confirm and then press button to save it to memory.

1) [About]: Version information

2) [Basic]: Configurations for internet connection


15/24

Service Number User Name Password

#777 [email protected] MTS

3) [RUIM]

4) [Advance]: Operating network

mailto:[email protected]


16/24

- This is very important parameter, it is strongly recommended to keep the default values.

5) [User]: Display options

- Always Top: The program window will be displayed on the top of all other open applications.

7.5 Connecting and Disconnecting the Internet 1) Press button for internet connection.


17/24

If connection succeeds, icon will appear. If failed to connect, icon will appear.

button to disconnect the internet 2) Press

7.6 Voice Call Menu

Dial calling number and Press button to make a voice call.

button. Press button to erase one digit at a time. To disconnect the voice call, press


18/24

7.7 SMS Menu In the SMS menu, there are 3 sub-menus (Write Message, Outbox, and Inbox)

Inbox Write

Outbox

Message

- Write Message: Edit and send new message

- Outbox: Sent message box

- Inbox: received message box

1) Write Message

- Edit the message in the window and press button to move to the number editing screen.

- Input number(s) for sending SMS, number(s) can be inputted from Phonebook records.

Press button to move to send the message screen

- Press button to send the message


19/24

- After pressing button, it will show the sending status

- If succeed in sending SMS then it will be returned to SMS menu.

- Sent message is saved in SIM card

- If fail to send SMS then it will display warning message.

2) Outbox

- In this menu, all sent messages are shown.

button. - To erase the message, select the message and press


20/24

- To see the message, select the message and press button.

- To send the message to a new number, press button.

3) Inbox

- In this menu, all received messages are shown.

- To erase the message, select the message and press button.

- To see the message, select the message and press button.

- To send the message to a new number, press button.


21/24

7.8 Phonebook Menu

• Stores the phone numbers and names into the RUIM.

• Making calls and sending messages to the stored numbers are possible.

• Maximum number of Phonebook entries is dependent on the RUIM capacity.

1) Store new number

screen, - Edit the number and name on this

And press save button on the right to save.

- If the index already exists, then warning message will be appeared.

2) Search the number

- Choose the searching type (All, Index, Name, Phone number).

- Edit the wanted name or number on this screen,

And press search button on the right to start searching.

3) Additions

- Press button to send a SMS message.

- Press button to make a voice call.

button to delete selected number. - Press


22/24

7.9 RCV / STV Activation Menu Press button to enter the RCV or STV activation interface, which prompts you to enter a 16 digit Pin code and click “OK” button to recharge. After receiving your message, the system will send back a sh

ort message with confirmation of successful recharge.

7.10 Help Menu Click on the icon to open the User Manual.

For offline viewing, click on Start>All Programs>MBrowse USB Modem>User Manual-MTS200C


23/24

8. Troubleshooting

Q: I cannot connect to the Internet?

A: Please check User name, Password and Service number on the [Setting] menu.

Q: How can I use the modem as memory Stick?

A: Insert a good quality Micro SD Card (Up to 4GB) in the socket below the UIM socket. Keep the Slider

Switch on the modem in MEMORY position. Insert the Modem in the USB port of your PC. This will

show up as an additional Removable Drive in the Windows Explorer. You can read /write /Edit files in

this location just like any other USB Memory Drive. Please check compatibility of MicroSD card

technology and Brand before using the same. To use your device in Modem mode, just move the switch

to MODEM position.

Q: The Internet connection is poor and frequently it gets disconnected.

A: The CDMA frequency is at unstable state. Try to move to a different place then use it again. Also, if

you touch or block the USB modem with hand/body contact, the modem connection speed degrades.

Please be careful not to touch the modem with your hand or any part of the body. You may use good-

quality USB extension cable to connect modem to the PC/laptop in poor signal or very high

interference areas.

Q: After the installation of the program, the program does not run and displays following

message


24/24

A: This means that USB modem and the computer are not connected properly OR the Slider switch on

the modem is not in Modem position. Please double check.

Q: During the running of the program, following message appears and the program halts.

A: The actual connection of USB modem and computer has been disconnected. Please check whether

the cable is dismounted, cable is disconnected or USB modem power has been turned off. Then try to

reconnect the modem.

Q: How many people can I send SMS messages at once?

A: It is possible to send maximum of 5 people at once.

Q: The program has ended but the USB modem power is turned off.

A: The power of USB modem is not controlled by the program. The point USB modem turns on

automatically is when USB is connected to the PC/Notebook.

Q: MBrowse USB Modem program displays “DB xxxx Error” message and terminates.

A: MBrowse USB Modem program uses mdb format type of database file. This type of format is

preinstalled when using Windows XP, Windows 2000 OS in a computer. However, this type of

database file has been removed by some other program.

Need to update following two (2) files from Microsoft site:

1. MDAC: <http://www.microsoft.com/downloads/details.aspx?FamilyID=6c050fe3-c795-4b7d-

b037-185d0506396c&DisplayLang=en>

2. Jet Engine 4.0:

http://www.microsoft.com/downloads/details.aspx?FamilyID=2deddec4-350e-4cd0-a12a-

d7f70a153156&DisplayLang=en

http://www.microsoft.com/downloads/details.aspx?FamilyID=6c050fe3-c795-4b7d-b037-185d0506396c&DisplayLang=en

http://www.microsoft.com/downloads/details.aspx?FamilyID=6c050fe3-c795-4b7d-b037-185d0506396c&DisplayLang=en

http://www.microsoft.com/downloads/details.aspx?FamilyID=2deddec4-350e-4cd0-a12a-d7f70a153156&DisplayLang=en

http://www.microsoft.com/downloads/details.aspx?FamilyID=2deddec4-350e-4cd0-a12a-d7f70a153156&DisplayLang=en

user manual mts200c

Documents

pcs usb port

quick start

mbrowse usb

usb modem

maintenance

ruim card

remove ruim

usb modem