valuation: principles and practice 06/02/08 ch. 12
TRANSCRIPT
Valuation: Principles and Practice
06/02/08Ch. 12
Valuation techniques
Relative valuation the value of an asset is derived from the pricing of
'comparable' assets, standardized using a common variable such as earnings, book value or revenues.
Discounted cash flow valuation The value of an asset is the discounted expected cash
flows on that asset at a rate that reflects its riskiness.
Residual Income valuation The value of an asset is based on the discounted
expected difference between net income and its associated cost of equity.
Relative valuation
The value of the firm is determined as:
Comparable multiple * Firm-specific denominator value
where the denominator value can be earnings, book value, sales, etc.
A firm is considered over-valued (under-valued) if the calculated price (or multiple) is greater (less) than the current market price (comparable firm multiple)
Assumptions: Comparable firms, on average, are fairly valued Comparable firms have similar fundamental characteristics
to the firm being valued.
Relative valuation Examples of relative valuation multiples
Price/Earnings (P/E) Earnings calculations should exclude all transitory
components
Price/Book (P/BV) Book value of equity is total shareholders equity – preferred
stock
Price/Sales (P/S)
Enterprise Value/EBITDA Enterprise Value = Mkt Cap + Debt – Cash EBITDA = Earnings before Interest Taxes Depreciation and
Amortization
Advantages and drawbacks of P/E
Advantages: Earnings power is the chief driver of investment value Main focus of security analysts The P/E is widely recognized and used by investors
Drawbacks If earnings are negative, P/E does not make economic
sense Reported P/Es may include earnings that are transitory Earnings can be distorted by management
Assumption: Required rate of return, retention ratio (with DDM) and
growth rates are similar among comparable firms
Advantages and drawbacks of P/BV
Advantages Since book value is a cumulative balance sheet amount, it is
generally positive BV is more stable than EPS, therefore P/BV may be more
meaningful when EPS is abnormally low or high P/BV is particularly appropriate for companies with
primarily liquid assets (financial institutions)
Disadvantages Differences in asset age among companies may make
comparing companies difficult
Assumption: Required rate of return, return on equity, retention ratio (with
DDM) and growth rates are similar among comparable firms
Advantages and drawbacks of P/S Advantages
Sales are generally less subject to distortion or manipulation Sales are positive even when EPS is negative Sales are more stable than EPS, therefore P/S may be more
meaningful when EPS is abnormally low or high
Disadvantages High growth in sales may not translate to operating
profitability P/S does not reflect differences in cost structure
Assumption: Required rate of return, profit margin, retention ratio (and
DDM) and growth rates are similar among comparable firms
Advantages and drawbacks of EV/EBITDA Advantages
This represents a valuation indicator for the overall company and not just equity.
It is more appropriate for comparing companies that have different capital structures since EBITDA is a pre-interest measure of earnings.
Appropriate for valuing companies with large debt burden: while earnings might be negative, EBITDA is likely to be positive.
Disadvantages Differences in capital investment is not considered.
Assumption: Required rate of return, growth rates, working capital needs, capital
expenditures and depreciation are similar among comparable firms
Benchmarks for comparison
Peer companies Constituent companies are typically similar in their
business mix Industry or sector
Usually provides a larger group of comparables therefore estimates are not as effected by outliers
Own historical This benchmark assumes that the firm will regress to
historical average levels
Considerations: market efficiency, historical trends, comparable assumptions
Leading and trailing P/E
Trailing (or current) P/Es is calculated using the firm’s current market price and the four most recent quarters’ EPS.
Leading P/Es is calculated using the firm’s current market price and next year’s expected earnings.
PEG Ratio
“I don’t buy stocks with P/E’s over 30. To our Foolish ear, that sounds identical to: I don't buy hydrogenated milk; I am born in May.” Motley Fool
When comparable firm P/Es are used to calculate the value of a firm, the assumption is that the firm has characteristics that are similar to that of the average comparable firm.
However, differences may exist. For example, a higher P/E for a particular firm may be justified because the firm has higher growth.
PEG Ratio
The Price/Earnings-to-Growth (PEG) accounts for differences in the growth in earnings between companies.
PEG is calculated as:
P/E divided by expected earnings growth (%).
"The P/E ratio of any company that's fairly priced will equal its growth rate." Peter Lynch
Discounted Cashflow Valuation: Basis for ApproachThe intrinsic value of a firm is the present value
of all of the firm’s cash flows.
where, n = Life of the asset CFt = Cashflow in period t r = Discount rate reflecting the riskiness
of the estimated cashflows
Value = CFt
(1+ r)tt =1
t = n
What cash flow do we use?
Cash Flows
To Equity To Firm
The Strict ViewDividends +Stock Buybacks
The Broader View (FCFE) Net Income- Net Cap Ex (1-Debt Ratio)- Chg WC (1 - Debt Ratio)= Free Cashflow to Equity
EBIT (1-t)- ( Cap Ex - Depreciation)- Change in Working Capital= Free Cashflow to Firm (FCFF)
What cash flow do we use? Dividends (discount rate = cost of equity):
Firm pays out more than 75% of its net income and; Firm has stable leverage
FCFF (discount rate = WACC): Firm has changing leverage or; Firm currently has negative FCFE. With the FCFF, the intrinsic value of equity is determined by calculating
the firm’s total value and then subtracting the market value of debt and adding back the firm’s current cash balance.
FCFE is simpler to use than the FCFF.
Regardless of the model used, the approach used to calculate intrinsic value is similar.
We will use the FCFE to calculate value in our discussions.
Discounted cash flow valuation with FCFE The intrinsic value of equity is obtained by
discounting free cash flow to equity, i.e., the residual cash flows after meeting all expenses, tax obligations and interest and principal payments, at the cost of equity, i.e., the rate of return required by equity investors in the firm.
where,
re = cost of equity
=t
1=tt
e
t
)r+(1
FCFE =Equity of Value
Discounted cash flow valuation with FCFE Since we cannot estimate cash flows forever, we may estimate
cash flows for a “high growth period” and then estimate a terminal value, to capture the value at the end of the period
where terminal value is the present value at time N of cash flows after period N.
Note: If we do not expect the firm to have a ‘high growth period, the intrinsic equity value is just the terminal value.
Ner )1(
lueTerminalVa
)r+(1
FCFE =Equity of Value
N=t
1=tt
e
t
Valuation steps
Estimate the discount rate
Estimate the current free cash flow to equity
Estimate growth rate(s) to estimate future cash flows
Estimate a terminal value
Compute the firm’s equity value and estimated stock price
Discount rate
The appropriate discount rate in valuing equity is the cost of equity which can be estimated using the CAPM.
Current FCFE
We can use the estimated FCFE equation to calculate CF to equity as this provides a better long run estimate than the exact FCFE equation.
FCFE = Net Income- (1- )(Cap Exp - Depr&Amort + Δ in WC) – Pref. Div.
When determining Cap Exp, Depreciation and change in working capital, we can either: take a historical average of these values if the firm
does not have smooth expenditure streams. Or use the current value.
Estimating future FCFE
Depending on the insight you have into the firm’s operations, we can approach future FCFE estimation in two ways: We can start with the top line (revenues) and
individually estimate the components of FCFE (expenses, cap. ex, etc.). We can use historical averages or regression models to estimate this.
We can assume that the relationship between the top line and FCFE remain stable into the future, in which case we need to estimate a growth rate in FCFE.
Current growth in FCFE
We can estimate the current growth in FCFE by first calculating the equity reinvestment rate (ERR).
The ERR represents the proportion of net income that the firm will retain for reinvestment. Whatever is left over can be paid out.
Normalized values (historical averages) are typically used to determine ERR.
IncomeInterest - IncomeNet
) - in WC)(1 Depr - Exp. Cap( ERR
Current growth in FCFE
The current growth rate then can be estimated as:
g = ERR * non-cash ROE
where non-cash ROE is defined as:
(Net Income – Interest Income)t
(BV of equity – (Cash + Marketable securities))t-1
Estimating future growth
A key assumption in all discounted cash flow models is the period of high growth, and the pattern of growth during that period. In general, we can make one of two assumptions: there is no high growth, in which case the firm is
already in stable growth there will be high growth for a period, at the end of
which the growth rate will drop to the stable growth rate (2-stage). Some advocate a smoother drop in growth between the first and second stages.
We need to determine the growth rates in each period as well as the length of the different periods if a 2-stage model is used.
Determinants of length of high growth period Size of the firm
Success usually makes a firm larger. As firms become larger, it becomes much more difficult for them to maintain high growth rates
Current growth rate While past growth is not always a reliable indicator
of future growth, there is a correlation between current growth and future growth. Thus, a firm growing at 30% currently probably has higher growth and a longer expected growth period than one growing 10% a year now.
Determinants of length of high growth period Barriers to entry and differential advantages
Ultimately, high growth comes from high project returns, which, in turn, comes from barriers to entry and differential advantages.
The question of how long growth will last and how high it will be can therefore be framed as a question about what the barriers to entry are, how long they will stay up and how strong they will remain.
Determinants of length of high growth period Questions to ask about firms:
What drives revenue growth? Can that be maintained?
What kinds of capital expenditure will be required to maintain free cash flow growth?
Can firms maintain their operating and gross margins?
Standard 1st stage lengths used are 5 years and 10 years.
Firm characteristics as growth changesVariable High Growth Firms Stable Growth
tend to Firms tend to
Risk be above-average risk be average risk
Dividend Payout pay little or no dividends pay high dividends
Net Cap Ex have high net cap ex have low net cap ex
(just covering depreciation)
ROC earn high ROC and ROE earn ROC closer to WACC
or ROE closer to cost of equity
Leverage have little or no debt higher leverage
Ways of Estimating Terminal Value
Terminal Value
Liquidation Value
Multiple Approach Stable Growth Model
Most useful when assets are separable and marketable
Easiest approach but makes the valuation a relative valuation
Technically soundest, but requires that you make judgments about when the firm will grow at a stable rate which it can sustain forever, and the excess returns (if any) that it will earn during the period.
Estimating terminal value
Estimating stable growth This is the growth rate that we assume the firm FCFE
will grow forever
The stable growth rate cannot exceed the growth rate of the economy (3-5%) but it can be set lower. If you assume that the economy is composed of high
growth and stable growth firms, the growth rate of the latter will probably be lower than the growth rate of the economy.
The stable growth rate can be negative. The terminal value will be lower and you are assuming that your firm will disappear over time.
No net capital expenditures and long-term growth You are looking at a valuation, where the terminal value is
based upon the assumption that operating income will grow 3% a year forever, but there are no net cap ex or working capital investments being made after the terminal year. When you confront the analyst, he contends that this is still feasible because the company is becoming more efficient with its existing assets and can be expected to increase its return on capital over time. Is this a reasonable explanation?
Yes No Explain.
Calculating terminal value
Terminal value (commencing in period N+1) is calculated as:
where g is the stable growth stage growth rate.
se
N
gr
FCFE
1 valueterminal
Calculating equity value
Our estimate for the equity value of the firm is then calculated as the present value of the individual future FCFEs during the 1st stage plus the present value of the terminal value. (For a single stage model, the equity value is simply the terminal value.)
To this we should add back the current cash balance of the firm.
Our estimated (intrinsic) value per share is:(Estimated equity value + cash)
number of shares outstanding
DCF vs. relative valuation
DCF valuation assumes that markets make mistakes in estimating value (i.e., current price is not an accurate reflection of the value of the firm) and these mistakes tend to be corrected over time and can occur over entire sectors.
Relative valuation assumes markets are correct on average (i.e., comparables on average are correctly priced)
Basis for Residual Income Valuation
The appeal of the residual income (RI) model is based on the fact that traditional accounting does not include a “charge” for equity capital.
Specifically, a company may generate a positive net income but may not be adding value to its shareholders if it does not earn more than the cost of equity.
Basis for RI valuation
RI is sometimes referred to as the economic profit earned by firms.
One example of a residual income model is referred to as the Economic Value Added (EVA) model.
Strengths of the RI model
Terminal value does not make up a large portion of the total value
The model can be used for companies that do not pay dividends and/or firms that have near-term negative free cash flows
The model can be used when cash flows are unpredictable or difficult to forecast. This can be particularly true for financial institutions.
Weaknesses of the RI model
The model relies on accounting data that can be subject to manipulation
When book value and ROE are unpredictable, the resulting estimate is less valid.
The RI valuation model
The RI model analyzes the intrinsic value of equity into two components:
The current book value of equity, plus The present value of expected future residual
income
The RI valuation model
The intrinsic value of common stock can be expressed as:
where BV0 = current book value of equity per share
BVt = expected per-share book value at period t
EPSt = expected Earnings per share for period t
RIt = expected residual income per share for period t
t
1t
10
=t
1=t00 )1(
*BV
1BV =Equity of eValue/sharV
te
tett
e
t
r
BVrEPS
)+r(
RI
The RI valuation model
In the model book value each period is determined by the following clean surplus relation:
The model also assumes that the growth in book value comes by the firm earning more than the cost of equity (ROE > re). The numerator of the second term can therefore be defined as:
DPS-EPSBV=BV tt1-tt
BV*)r-(ROE=BV*r-EPS 1-te1-tet
Single-stage RI valuation
If we assume that the firm’s book value (and RI per share) will grow at a constant rate, g, forever, we can value a firm using a single-stage RI model:
000 * V BVgr
rROEBV
e
e
Multi-stage RI valuation
If the assumption of constant growth is not appropriate, which may be particularly true if the firm currently generates a high ROE relative to the cost of equity, we can model the firm using two stages.
During the first stage we calculate present values of residual incomes individually.
In the second (terminal) stage we make one of the following assumptions about continuing residual income: Residual income remains constant through perpetuity (and
ROE > re) from the terminal year forward Residual income is zero from the terminal year forward
(ROE = re)
Multi-stage RI valuation
We can calculate the value today using a multi-stage model using the following formula
If RI is expected to be constant through perpetuity from terminal year forward, terminal value = RIT / re
If RI is expected to be zero from terminal year forward, terminal value = 0
Te
T
tt
e
tet
rr
BVrROEBV
)1(
Value Terminal
)1(
*)( V
1
100