ventilation - vent.co.uk · 35 s f w h f = –w x –s 2 h s f w h f w f = – w 2 actuator stroke...

natural & smoke v e n t i l a t i o n

Actuators

How to choose the correct actuatorSintesi 2000

Micro SVegaC20C30C40

QuasarACK4

Micro LMicro XL

MasterSupermaster

TwinmasterUSA2/3 – ACK4

D4 FCEMax

D6 FCEForce

D20 FCED30 FCE

UlyssesRack

Double & Dual Rack S1 & S1 Dual

34

Vent Engineering offer the UK’s most comprehensive range of imported electric chain and linear actuators. Our company policyenables us to offer the most suitable equipment for all projects as we are not restricted to any particular manufacturer. This is toensure that you have complete confidence in our actuator recommendations.

The following technical details are to guide you in your final choice of actuator and should be considered before any decision is made.

There are two types of Actuators: 1) Linear/Rack Actuators (rigid rod), 2) Chain Actuators (flexible chain).

The linear/rack actuator can offer great performance and push high loads, but has a requirement both physical and aesthetic,which is not always acceptable. The actuator body has to move in a pivoting motion from its brackets, therefore it is necessary to verify that there are no obstacles to its rotational movement. This has to be done to prevent damage to the actuator itself or tothe window. The linear/rack actuator takes up more space than the total opening stroke usually 200mm – 300mm further. If a rodactuator is unsuitable, a chain actuator must be used, subject to weight restrictions.

The chain actuator operates generally at a lower thrust power and requires a limited space, as well as being aesthetically pleasing. Thisimproves the appearance of the window, compared with other options.

Chain actuators on top hung or bottom hung windows, less than 800mm in length, require the installation of swivel brackets to hold theactuator. This allows the unit to pivot whilst the chain operates and thus not damage the unit. For hopper frame windows, i.e. bottom hingedwindows that open inward, chain actuators are definitely preferable, although the height of window must be checked.

Most windows that can be opened allow the application of any type of actuator.

For windows having a width larger than 1500mm a single actuator is not enough. At this size the window and the safety of the installationrequires the application of more than one actuator, usually linked to a synchronisation device. Please consult Vent Engineering for the correctactuator, if you are unsure.

The indicated loads do not include the force exerted by wind or other extreme weather conditions. If the actuator is installed in areas thatmay be subject to these conditions, contact our technical department.

Winter maintenanceIt is good practice to operate the actuators regularly throughout the winter months. This is to ensure that the vents do not seize up and putundue strain on the motor leading to it burning out.

Window type

For bottom hinged windows (hinges on thebottom side, inward opening) we recommendthat chain actuators are installed: they do nottake up space inside the room and areaesthetically discreet. Moreover, for these kindof installations, special protection classes (IP

rating) for water or powders are not usually required. The installationof linear actuators would need very long brackets (not available).

For top hinged windows (hinges on the topside, outward opening) we recommend theinstallation of actuators with a specialprotection class (IP rating) and enoughpower to support, with sufficient rigidity, themaximum load that occurs when the windowis completely opened.

For roof windows (skylights, domes, etc) werecommend the installation of actuators witha special protection class (IP rating) andenough power to support with sufficientrigidity the maximum load, that occurs whenthe window is completely opened.

For horizontal pivoting windows, that chainactuators are installed: they do not take upspace inside the room and are aestheticallydiscreet. Moreover, for these kind ofinstallations, special protection classes (IPrating) for water or powders are not usuallyrequired. The installation of linear actuators

would need very long brackets (not available).

For operating sun blade or louvre type windows, a rack or linear type actuatorshould be used. The total movementrequired will determine the stroke and the actuator you require.

For side hung windows (casement windows,inside opening) we recommend theinstallation of a chain actuator on thevertical side. It is impossible to obtain a 90°opening.

How to choose the correct actuator for your window

35

S

F

W

H F = – X –W S 2 H

S

FW

H

F

W

F = – W 2

Actuator strokeFor a window to open wide, the following factors need to be taken into consideration:

a) For a chain actuator, the stroke must not exceed 1/3 of the window height, otherwise the bending chain would cause a loss ofrigidity and therefore loss of performance.

b) For a linear actuator it is necessary to consider the actuator intrusion into the room. Looks apart, the actuator rotation anglemust also be taken into account. It is necessary to evaluate carefully the position of the rotational axis choosing and positioning the fixing brackets. Vent Engineering can provide linear actuators with side brackets for this purpose.

Actuator forceTo calculate the window opening and closing force, please refer to the following simplified formula:

Bottom Hinged Window Top Hinged Window

Therefore, the greater the window height, the lower the force and stroke required.

Horizontal Windows (roof windows, skylights, domes, etc.)

For inclined windowsApply the formula for horizontal windows. This is necessary if during opening the window lies in a horizontal position. Do take precautions in the other cases.Note: In the above mentioned formulas, the wind and snow load have not been considered.

Wind LoadOn wider windows please consider the following: if they are very high the greatest part of their weight is loaded onto the hingesand the required opening force is greatly reduced. However, high winds the force on a large surface is considerable and the actu-ator must be chosen carefully.

Protection ClassThe chain actuators are less protected from contamination by water or dust, sand, etc. than the linear actuators. Some linearactuators, with protection class IP 65, are practically watertight in static conditions. For this reason we suggest installing chainactuators on bottom hinged windows or, in combination with a rain sensor, on top hinged windows.

Large WindowsFor very large or wide windows you will require more than one pushpoint. When a large window is closed, its corners cannot be watertight or airtight with only one pushpoint. When opened, the stability is compromised by wind. We strongly recommend installing twopush (or pull) points if the window is larger than 1500mm or if the rigidity of the frame is not of a good standard.

The installation of two actuators on the same window is possible but requires a synchronisation unit or a two chain actuator. This is because it is not possible to guarantee the constant speed of single push actuator. The consequences if one eventuallyslows significantly or fails result in damage to the second actuator or the window.

For any further information contact the Vent Engineering technical department.

W= window sash weight S= actuator strokeF= required force H= window sash height

W= window sash weight F= required force

VENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERING

230v

110v

24v

300N 30kg

250–380mma d j u s t a b l e

FIXINGS AND BRACKETS AVAILABLE

DIMENSIONS

CH

AIN

AC

TUATO

RSINTESI 2000

24.5mm

7mm

259.5mm

284mm (Sintesi 2000) – 234mm (Sintesi 24V DC)

82.75mm

7mm50

mm

pivoting bracket bar bracket

37

VENT ENGINEERING

VENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERING

VENT ENGINEERING

VENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERINGVENT ENGINEERING

TECHNICAL SPECIFICATIONS

NO ONE OPENS MORE VENTStel 01202 744958, fax 01202 733026 email [email protected] website www.vent.co.ukUnits 16c & 16f, Chalwyn Industrial Estate, Poole BH12 4PE

230v

110v

24v

300N 30kg


PRODUCT SUMMARY

PRODUCT CODESPRODUCT CODE PRODUCT DESCRIPTION

BRACKET CODE BRACKET DESCRIPTION

38

SINTESI 2000

Voltage SupplyThrust Force

StrokeAbsorbed CurrentTime RatingLimit StopSafety StopWiringSpeedDouble InsulatedProtection ClassParallel Connection OptionWeightColours Available

SINTESI 24vSINTESI 2000 110vSINTESI 2000 230v24v250mm - 180 N 380mm - 90 N adjustable 250mm/380mm0.8 amps50%microswitcheselectronic2 core~ 14mm/snoIP20yes1.5kgwhite / dark brown / silver

110v250mm - 180 N 380mm - 90 N adjustable 250mm/380mm1.3 amps20%microswitchesthermic4 core~ 40mm/snoIP20yes1.5kgwhite / dark brown / silver

230v250mm - 180 N 380mm - 90 N adjustable 250mm/380mm0.65 amps20%microswitchesthermic4 core~ 40mm/snoIP20yes1.5kgwhite / dark brown / silver

• Very high speed and noiseless operation.• Possibility of selecting two different strokes:

250 mm or 380 mm on site.• Corrosion-protected chain with stainless

steel pivots.• Three dovetail slides for an easy installation;

the sliding fixing bracket is included in the package.

• A longer fixing bracket is available in case of very heavy windows.

• A longer eyelet is available in case of wooden windows.

• Quick release system for easy window cleaning.• Minimum window height: 500 mm with

250 mm stroke, 800 mm with 380 mm stroke. In case of lower windows install the pivoting brackets.

UPGRADEa v a i l a b l e

• Can be powder coatedto any RAL colour

AU-S2000-110v Sintesi 2000 110vAU-S2000-230v Sintesi 2000 230vAU-S2000-24v Sintesi 2000 24v

BRAU-SIN Sintesi bracketBRAU-SIN-PIVOT Set of pivot brackets for Sintesi


230v

24v

200N 20kg

200mm/250mm


DIMENSIONS

MICRO S

24v - 286mm / 230v - 366.4mm

29m

m

52.5mm38mm

24v - 269mm / 230v - 349.4mm

24v - 96mm / 230v -176mm

30m

m

CH

AIN

AC

TUATO

R

26mm

138mm 14mm

25mm

5mm

40mm

30mm33mm

4mm39

VENT ENGINEERING


VENT ENGINEERING




230v

24v

200N 20kg

200mm/250mm

PRODUCT SUMMARY

PRODUCT CODES

40

PRODUCT CODE PRODUCT DESCRIPTION

MICRO S



Voltage SupplyThrust ForceTraction ForceStrokeAbsorbed CurrentTime RatingLimit StopSafety StopWiringSpeedDouble InsulatedProtection ClassParallel Connection OptionWeightColours Available

MICRO S 230v MICRO S 24v230v200N 200N200mm, 250mm0.30 amps4 minhole sensor

4 core~ 10mm/snoIP20yes0.80kg,0.84kgsilver or black

24v200N 200N200mm, 250mm0.80 amps5 minhole sensor

2 core~ 10mm/snoIP20yes0.63kg,0.67kgsilver or black

• Minimum overall dimensions.• 230v or 24v dc power supply.• Easy to install.• Low consumption.• Noiseless.• Protective limit switch (24v dc version).• Electric actuator with reinforced double-

sprocket chain inside the actuator body.

• Fitted with electronic limit switch system, which can be connected in parallel.

• Complies with 73/23 LVD - 89/336 EMC directives, as modified by 93/68 CE

AD-MS-230v Micro S 230vAD-MS-24v Micro S 24v


230v

24v

250N 25kg

300mm


DIMENSIONS

41

VEGAC

HA

IN

ACTU

ATOR

450mm

45mm

32mm

59mm

12mm

32.85mm

52.25mm

12.5mm

12mm

12mm

8mm

14.5mm

50mm 90mm

82mm12mm

51mm

VENT ENGINEERING


VENT ENGINEERING




230v

24v

250N 25kg

300mm

PRODUCT SUMMARY


42

VEGA

Voltage SupplyStrokeForceSpeedMax Current AbsorptionOperationParallel Connection OptionLimit StopSafety StopSignalProtection ClassTime ratingColours available

100 Vac - 240 Vac300 mm250 N~ 9mm/s0.3A - 0,15 A

yeselectronicelectronicopen/closeIP 3050%white / black / grey

VEGA AC



• Highest performance in minimum size: the die-cast aluminium casing has a very small section (45 x 32 mm) and can be easily built-in into the frame of curtain walls.

• New concept double link chain in stainless steel.

• Chain output in central position.• Quick and easy installation: the manual closing

position regulation is not required, avoiding possible mistake. Closing is regulated by an electronic limit switch.

• Electronic stop in case of overload.

• Supplied with 1.5 m cable and pivoting brackets.• Installation without brackets is possible for

windows with pivoting hinges only if the vent height is at least 900 mm.

• Option: coupling control box for two actuators 24 Vdc on the same window.

AU-VEG-230v Vega 230vAU-VEG-24v Vega 24v

24 Vdc ± 10%300 mm250 N~ 9mm/s0.6 ampsby polarity inversionyeselectronicelectronicopen/closeIP 3050%white / black / grey

VEGA DC24 Vac/dc ± 10%300 mm250 N~ 9mm/s0.6 amps

yeselectronicelectronicopen/closeIP 3050%white / black / grey

VEGA IR


230v

110v

24v

200N 20kg

240-360mma d j u s t a b l e


DIMENSIONS

C20C

HA

IN

ACTU

ATOR

top hung

bottom hung

66.3

mm

283mm339mm

89mm65.5mm

361mm377.4mm

48m

m

340mm284mm

21mm

42mm

34m

m

15m

m

362mm

48m

m

64.5

mm

vertical mounting brackettop hung bracket bottom hung bracket

57m

m

42m

m

34m

m

15.1

mm

11.7

mm

43mm74.8mm

vertical mounting

VENT ENGINEERING


VENT ENGINEERING




230v

110v

24v

200N 20kg


PRODUCT SUMMARY


44


• 110v availableVoltage SupplyThrust ForceTraction ForceStrokeAbsorbed CurrentTime RatingLimit StopSafety StopWiringSpeedDouble InsulatedProtection ClassParallel Connection OptionWeightColours Available

C20 230v C20 24v230v200N 200N240mm/360mm0.12 ampsS2 3minselectronicnot necessary4 core~10mm/syesIP30yes - special order0.970kgwhite / black / silver

24v200N 200N240mm/360mm0.36 ampsS2 3minselectronicnot necessary2 core~9.7mm/snoIP30yes - special order0.940kgwhite / black / silver

• Double link chain with very high resistance on top loads.

• Adjustment of the stroke at 240 or 360mm, simple and fast.

• High stroke, together with a reduced size of the actuator, to allow applications that requireminimum size .

• Automatic stop on closing stroke between 1mm to 100mm

• Central chain position• Double insulated electrics.• Simple swivel bracket for fast installation.• Fast hooking and unhooking system of the

chain to the window (international patent).

• Available in black, silver and white.• Complies with the

CEE EN 60335-1, 89/336 CEE (electromagnetic compatibility) regulations.80A

AT-C20-230 C20 230vAT-C20-24 C20 24v

C20


230v

24v

300N 30kg



DIMENSIONS

C30C

HA

IN

ACTU

ATOR

vertical mounting

top hung

bottom hung

276mm

6.5m

m

310mm

335.2mm

89mm

310mm

65.5mm±0.8mm

24.5

mm

101m

m

80m

m4m

m

11m

m27

mm

101m

m

0.5mm

310mm276mm

05.2mm

04.2mm

6.5m

m6m

m

4mm

72m

m

91m

m

19m

m

4.2m

m

42mm

top hung bracket bottom hung bracketvertical mounting bracket53mm 96.5mm

7.5mm 53mm

53mm

49m

m

49m

m

54m

m

37m

m

60m

m

37m

m

22m

m 16m

m

VENT ENGINEERING


VENT ENGINEERING




230v

24v

300N 30kg


PRODUCT SUMMARY


C30


C30 230v C30 24v230v300N 300N200mm / 380mm0.32 ampsS2 3minselectronicelectronic3 core~ 24mm/syesIP30no1.1kgwhite / black / grey

24v300N 300N200mm / 380mm1.3 ampsS2 3minselectronicelectronic2 core~ 19mm/snoIP30no1.1kgwhite / black / grey


• Possibility of adjustment of the stroke at 200 or 380mm, simple and fast.

• Central exit of double link chain. • Double insulated electrics.• Fast hooking and unhooking of chain to

window.• Simple swivel bracket for fast installation.• Fast adjustment of (closing) end stop from

0-15mm• Tilting bracket with additional adjustment

of 15mm, for use on overhung windows.• Buzzer to indicate wrong installation.

AT-C30-230 C30 230vAT-C30-24 C30 24v

46


230v

24v

400N 40kg



DIMENSIONS

C40C

HA

IN

ACTU

ATOR

top hung

vertical mounting

bottom hung

top hung

vertical mounting

bottom hung

12m

m

387.5mm

19.5

mm

65.5mm±0.8mm

177.5mm

355mm89mm

116.

2mm

355mm

177.5mm

15.5

mm 55

mm

42mm

12m

m

134.

9mm

387.6mm

387.6mm

350mm

116.

2mm16

mm

5mm175mm

89mm

52m

m

65.5mm±0.8mm

top hung bracket bottom hung bracketvertical mounting bracket

95mm 95mm95mm

51m

m

50m

m

50m

m

50m

m

13m

m46

mm

16m

m

68.7mm

126.4mm

68.7mm

47

VENT ENGINEERING


VENT ENGINEERING




230v

24v

400N 40kg


PRODUCT SUMMARY


48

C40


C40 230v C40 24v230v400N 400N100 - 500mm adjustable0.24 ampsS2 3minselectronic electronic3 core~ 21mm/syesIP55no1.9kgwhite / black / grey

24v400N 400N100 - 500mm adjustable1.1 ampsS2 3minselectronic electronic2 core~ 18mm/snoIP55no1.9kgwhite / black / grey


• Adjustment of the stroke in seven positions from 100 to 500mm.

• Central exit of chain.• Fast hooking and unhooking system of the

chain to window.• Simple swivel back plane, fast and suitable for

windows of any type and size.• Electronic traction control speed reduction,

during the last 100mm of closing action.

• Tilting bracket with additional adjustment of 15mm, for use on overhung windows.

• Buzzer to indicate wrong installation.• High protection degree IP 55.

AT-C40-230 C40 230vAT-C40-24 C40 24v


230v

110v

24v

300N 30kg

500mm


DIMENSIONS

49

QUASARC

HA

IN

ACTU

ATOR

3,4

15 32,5

6,5

20

7,535

33123,432 339 337

35

55

15

3620

13,5 47

3632

47

32,5

202337 35

1

2525

50

60 55

14,4

13,5

676

12

25,2

> 61

7,5

19532 19531

> 6

122312

1

13,5 47

28,5 32

3,432

15

36

47

32,5

pivoting bracket

676mm

339mm 337mm

14.4mm

55mm

35mm 20

12mm

37mm

60mm

23

55mm

35mm20

47mm13.5

3.4m

m

32m

m

36m

m

25.2

mm

15

20

6.5m

m

VENT ENGINEERING


VENT ENGINEERING




230v

110v

24v

300N 30kg

500mm

PRODUCT SUMMARY


QUASAR


Quasar 24vQuasar 110vQuasar 230v24v300N 300N500mm0.8 amps50%electronicelectronic2 core~ 15mm/snoIP20yes2.165kgwhite / dark brown / silver

110v300N 300N500mm0.4 amps50%electronicelectronic4 core~ 15mm/snoIP20yes2.3kgwhite / dark brown / silver

230v300N 300N500mm0.2 amps50%electronicelectronic4 core~ 15mm/snoIP20yes2.3kgwhite / dark brown / silver

• Can be easily built into the frame of curtain walls.

• New concept double link chain in stainless steel.

• Chain exit in central position• Quick and easy installation: closing position

regulation is not required, avoiding possible mistakes. The actuator stops in the closing position and is regulated by an electronic limit switch.

• Electronic stop in case of overload.• Low noise operation.• Supplied with wired terminal board and 1.5m

cable.

• Supplied with pivoting brackets.• Installation without brackets is possible for

windows with pivoting hinges only if the vent height is at least 1500mm.

• Quick release system for easy window cleaning.

AU-QUAS-230/110 Quasar 230v/110vAU-QUAS-24 Quasar 24v



50


230v

24v

300N 30kg


DIMENSIONS, FIXINGS AND BRACKETS

ACK4C

HA

IN

ACTU

ATOR

47.

8mm

14.9

mm

5

105mm 105mm6.5mm

11.8mm12.5mm

83m

m1

3.7m

m

288.5mm

6.5mm

8mm

20m

m

100mm<-->110mm 9

27m

m

5mm32mm

49mm

27mm

5mm

60m

m5

0m

m

3mm

65mm 56mm

30mm2.8mm

10.2mm

89m

m38

mm

21m

m

5.2mm

35m

m

21m

m

39mm29mm

35mm

34m

m

44m

m

10.4mm8mm

5.2mm

2.5m

m81 5

mm 5 .2

mm

10.2mm

.

10.2

internal opening bracket

large swivel bracket u-shape bracket

long bar swivel bracket swivel bracket

long bar bracket

21m

m

25mm

8.2mm

51

VENT ENGINEERING


VENT ENGINEERING




230v

24v

300N 30kg


PRODUCT SUMMARY


52

ACK4


ACK4 230v ACK4 24v230v350N 350N100 - 400mm adjustable0.32 ampsS2 2minselectronicelectronic3 core~ 28mm/syesIP55ACK4-USA2/31.9kg white / black / silver

24v350N 350N100- 400mm adjustable2.1 ampsS2 3minselectronicelectronic2 core~ 18mm/snoIP55ACK4-USA2/31.9kgwhite / black / silver

• Adjustment of stroke in 7 positions from 100 to 400mm

• Central exit of double link chain.• Double insulated electrics• Simple swivel back planes, fast and suitable for

windows of any type and size (not included in the packaging).

• Buzzer to indicate wrong installation.• High protection degree IP 55.• Collection and synchronisation possibility for 2

or 3 actuators on the same window (USA2 or USA3 control unit).

• Available in black, silver and white.

• The actuator complies with regulations CEE EN 60335-1, 89/336 CEE (electromagnetic compatibility).



AT-ACK-42 ACK4 230vAT-ACK-44 ACK4 24v

BRAT-L ACK4 long bracketBRAT-LS ACK4 large swivel bracketBRAT-S ACK4 small swivel bracketsBRAT-U ACK4 ‘u’ shaped brackets



230v

24v

350N 35kg

280mm/380mm


DIMENSIONS

53

MICRO LC

HA

IN

ACTU

ATOR

460mm

423mm

67mm

40m

m

171.5mm

14.8mm156mm

40mm

25mm

35mm

VENT ENGINEERING


VENT ENGINEERING




230v

24v

350N 35kg

280mm/380mm

PRODUCT SUMMARY

PRODUCT CODES

54


MICRO L


MICRO L 230v MICRO L 24v230v350N 350N280mm, 380mm0.45 amps4 minreedthermic4 core~ 18mm/snoIP22yes1.70kg, 1.86kgblack or silver

24v350N 350N280mm, 380mm1 amps50%reedthermic2 core~ 19mm/snoIP22yes1.45kg, 1.59kgblack or silver



• Maintenance free.• Extended stroke.• Low consumption.• Noiseless operation.• Protective limit switch (24v dc version).• Electric actuator with reinforced double-

sprocket chain inside the actuator body.• Fitted with electronic limit switch system,

which can be connected in parallel.• Complies with 73/23 LVD - 89/336 EMC

directives, as modified by 93/68 CE

AD-ML-280-24 Micro L 280mm 24vAD-ML-280-240 Micro L 280mm 230vAD-ML-380-24 Micro L 380mm 24vAD-ML-380-240 Micro L 380mm 230v


230v

24v

400N 40kg

420mm/600mm


DIMENSIONS

55

CH

AIN

AC

TUATO

RMICRO XL

573mm

609mm 86mm

50m

m

180mm

14.8mm156mm

40mm

25mm

35mm

VENT ENGINEERING


VENT ENGINEERING




230v

24v

400N 40kg

420mm/600mm

PRODUCT SUMMARY

PRODUCT CODES

56


MICRO XL


MICRO XL 230v MICRO XL 24v230v400N 400N420mm, 600mm0.7 amps4.5 minreedthermic4 core~ 22mm/snoIP22yes3.03kg, 3.44kg,black or silver

24v400N 400N420mm, 600mm, 835mm1 amps50%reedthermic2 core~ 17mm/snoIP22yes2.78kg, 3.16kg, 3.54kgblack or silver



• The Micro XL are chain actuators with reinforced double sprocket chains.

• The XL is available in 24v DC or 230v AC format.• Fitted with electric limit switch systems,

which can be connected in parallel. • Noiseless operation• Maintenance free• Extended Stroke• Attractive design

• Complies with 73/23 LVD - 89/336 EMC directives, as modified by 93/68 CE

AD-MXL-420-24 Micro XL 420mm 24vAD-MXL-420-240 Micro XL 420mm 230vAD-MXL-600-24 Micro XL 600mm 24vAD-MXL-600-240 Micro XL 600mm 230vAD-MXL-835-24 Micro XL 835mm 24v


230v

24v

360N 36kg

380mm


DIMENSIONS

57

MASTERC

HA

IN

ACTU

ATOR

158.8mm / 318.5mm

22mm

414.5mm / 573mm

439.5mm / 598mm

41.5

mm255.2mm / 254.5mm

47.5mm

65m

m


VENT ENGINEERING


VENT ENGINEERING




230v

24v

360N 36kg

380mm

PRODUCT SUMMARY


58

MASTER


• 110v available • Can be powder coated

to any RAL colour


Master 24vMaster 230v24v360N 360N380mm1.2 amps50%microswitcheselectronic2 core~ 12mm/snoIP44yes2kgwhite / dark brown / silver

230v360N 360N380mm0.16 amps50%microswitcheselectronic4 core~ 12mm/snoIP44yes2kgwhite / dark brown / silver

• For skylights, roof windows, top and bottom hinged.

• Very high force in push and pull action.• Corrosion-protected double link chain with

stainless steel pivots.• High protection IP 44.• Quiet operation.• Supplied with wired terminal board and

1.5 m cable.• No additional brackets are necessary for

windows with windowsill.• Quick release system for easy window cleaning.• Minimum window height: 800 mm. In case of

lower windows install the pivoting brackets

• Parallel connection allows several windows to operate simultaneously.

AU-MA-24 Master 24vAU-MA-110 Master 110vAU-MA-220 Master 230v


230v

24v

400N 40kg

450mm/600mm/800mm


DIMENSIONS

59

SUPERMASTERC

HA

IN

ACTU

ATOR

pivoting bracket bar bracket bar bracket

stroke

strokestroke

strokestroke

stroke

stroke stroke stroke

VENT ENGINEERING


VENT ENGINEERING




230v

24v

400N 40kg

PRODUCT SUMMARY


60

SUPERMASTER


Traction ForceStrokeAbsorbed CurrentTime RatingLimit StopSafety StopWiringSpeedDouble InsulatedProtection ClassParallel Connection OptionWeightColours Available

Supermaster 24vSupermaster 230v24v450mm, 600mm 400N 800mm 300N400N450mm,600mm or 800mm2 amps50%microswitcheselectronic2 core~ 20mm/snoIP20yes3kgwhite / dark brown / silver

230v450mm, 600mm 400N 800mm 300N400N450mm,600mm or 800mm0.8 amps20%microswitchesthermic4 core~ 23mm/snoIP20yes3kgwhite / dark brown / silver

• Double link chain solves the problem of openinglarge or wide windows.

• Very high speed and noiseless operation.• Exclusive closing position regulation system for

a quick installation.• Safe operation with push button.• Supplied with wired terminal board and with

1.5 m cable.• No additional brackets are needed for

installation on windows with windowsill.• For windows without windowsill a fixing bracket

(sliding within the dovetail slide) is available foran easy installation

• Minimum window height: 900 mm for 450 mmstroke, 1200 mm for 600 mm stroke, 1600 mmfor 800 mm stroke. In case of lower windowsinstall the pivoting brackets.

• Available on request version with clear contactclosing signal (only 230v version).


• 110v available • Can be powder coated

to any RAL colour

AU-SM-24-450 Supermaster 450mm 24vAU-SM-240-450 Supermaster 450mm 230vAU-SM-24-600 Supermaster 600mm 24vAU-SM-240-600 Supermaster 600mm 230vAU-SM-24-800 Supermaster 800mm 24vAU-SM-240-800 Supermaster 800mm 230v

450mm/600mm/800mm


24v

700N 70kg

380mm


DIMENSIONS

61

TWINMASTERC

HA

IN

ACTU

ATOR


VENT ENGINEERING


VENT ENGINEERING




24v

700N 70kg

380mm

PRODUCT SUMMARY


62

TWINMASTER




Twinmaster 24v24v700N 700N380mm2 amps50%microswitcheselectronic2 core~ 12mm/snoIP45yes4kgwhite / dark brown / silver

• For skylights, roof windows, top and bottom hinged.

• For very wide (more than 1.5 m) and heavy skylights and windows use the TwinMaster with two chains: the actuator is equipped with electronic circuit for the two internal motors control. Standard distance between chains: 700 mm. Custom distances available between the chains from 400 mm to 1500 mm (minimum order: 10 pieces).

• Very high force in push and pull action.• Corrosion-protected double link chain with

stainless steel pivots.• High protection from atmospheric agents:

splashing water and solid foreign objects of 1 mm diameter and greater.

• Quiet operation.• Supplied with wired terminal board and

1.5 m cable.• No additional brackets are necessary for

windows with windowsill.• Quick release system for easy window cleaning.• Minimum window height: 800 mm. In case of

lower windows install the pivoting brackets • Parallel connection allows several windows to

operate simultaneously.

AU-TW-24 Twinmaster 24v


230v

24v

400N 40kg

240mm/360mm

DIMENSIONS

63

C240C

HA

IN

ACTU

ATOR

89 12

L: FROM 1500mm TO 4000mm

30.3

45 46 48

99.5

271839

L: FROM 1500mm TO 4000mm

4589

46

97

48

39.4

21.4

46

L: FROM 1500mmTO 4000mm

103

46

88.5

95.5

vertical mounting

top hinged windows

bottom hinged windows

VENT ENGINEERING


VENT ENGINEERING




230v

24v

400N 40kg

240mm/360mm

PRODUCT SUMMARY


64

C240

Max recommended loadStrokeAbsorbed curentIdle translation speedDuration of the idle strokeDouble insulationService typeOperating tempProtection degreeStroke end regulation in closingStroke endChainAvailable lengths of profileAvailable brackets

400N360mm (or 240mm on request)0.22 A (230V vers.), 0.75A (24V vers.)7 mm/s51 secYesS2 3min-5 +50 °CIP30Not necessaryElectronic in opening, by amperometric absorption in closureDouble-link, steelFrom 1500mm to 4000mmSwivelling brackets for top and bottom hinged windows (adjustablesliding all long the profile).

• Suits top hung windows wider than 2 m and, ingeneral, all kind of façade windows.

• Accurate and stylish aluminium profile.• Swivelling fitting brackets adjustable at any

position all along the profile allow a swivel movement of the actuator.

• Rigid double link chains that guarantee very high resistance on top loads.

• Simple quick fit installation to window.• Can suit the specified length (from 1500mm

up to 4000mm).

AT-C240-24 Dual push points chain actuator 24vAT-C240-230 Dual push points chain actuator 230v


230v

24v

600N800N

60kg80kg


INSTALLATION LAYOUT

DIMENSIONS

65

CH

AIN

AC

TUATO

R

200mm

80m

m15

5mm

83m

m

280mm

47.8

mm

ACK4see page ? for all dimensions

USA sycronisation box

For bracket measurements see ACK4 p55

USA2/3 – ACK4

VENT ENGINEERING


VENT ENGINEERING




230v

24v

600N800N

60kg80kg

100–400mm

PRODUCT SUMMARY



66

USA2/3 – ACK4


USA2/3-ACK4 230v USA2/3-ACK4 24v230v600N/800N 400N/600N100 - 400mm adjustable0.64/0.96 ampsS2 2minselectronicelectronic3 core~ 28mm/syesIP55yes3.8kg, 5.7kg white / black / silver

24v600N/800N 600N/800N100 - 400mm adjustable4.2/6.3 ampsS2 3minselectronicelectronic2 core~ 18mm/snoIP55yes3.8kg, 5.7kgwhite / black / silver

• The electronic control of the chain allows sevenstroke end positions. It is easily adjustable at any moment by acting on the width adjusting screw, situated on both sides of the actuator.

• The aesthetic design makes the actuator suitable for most locations.

• The electric parts are double insulated (therefore earth wire is not necessary).

• On the chain end (double-linked and made of STAINLESS steel) it is possible to effect a 10mm adjustment. The maximum available stroke is 400mm.

• Comes with 8 metre cable option• The actuator is marked and complies with

the CEE EN 60335-1, 89/336 CEE (electromagnetic compatibility) regulations.



AT-USA2-230 ACK4-USA2 230vAT-USA2-24 ACK4-USA2 24vAT-USA3-230 ACK4-USA3 230vAT-USA3-24 ACK4-USA3 24vAT-USA2-230-8M ACK4-USA2 230v with 8 metre cableAT-USA2-24-8M ACK4-USA2 24v with 8 metre cable

BRAT-L ACK4 long bracketBRAT-LS ACK4 large swivel bracketBRAT-S ACK4 small swivel bracketsBRAT-U ACK4 ‘u’ shaped brackets


230v

200N 20kg

105mm/180mm/300mm


DIMENSIONS

67

D4 FCELIN

EA

R

ACTU

ATOR

298mm

45mm

20m

m

51mm

79mm

65mm35mm

61.5mm

50mm

VENT ENGINEERING


VENT ENGINEERING




230v

200N 20kg

105mm/180mm/300mm

PRODUCT SUMMARY


68

D4 FCE


D4 230v230v200N 200N105,180,300mm0.7 amps2 minmicroswitchesthermic4 core~ 30mm/snoIP44yes1.30kg, 1.34kg, 1.46kgsilver

• Quiet and speedy in operation, the D4 is ideal for opening sun shields, louvre windows, domes and top hinged windows/vents.

• The D4 compact size enables it to fit in tight spaces, fitting is simple and the two side guides allow the positioning of the fastening bracket anywhere along the motor body.

• Maintenance free• Built-in anodised aluminium• Equipped with limit switches and relays for the

parallel connection.

• Built in cut out• Complies with 73/23 LVD - 89/336 EMC


AD-D4-230-180 D4 FCE 180mm 230vAD-D4-230-300 D4 FCE 300mm 230v


230v

450N 45kg

300mm/500mm


DIMENSIONS

69

MAXLIN

EA

R

ACTU

ATOR

65

74

60

58

89

105

min 17.5max 32.5

413 (stroke 300 mm)

613 (stroke 500 mm)

sliding bracket

VENT ENGINEERING


VENT ENGINEERING




230v

450N 45kg

300mm/500mm

PRODUCT SUMMARY



70

MAX


Traction Force

StrokeAbsorbed CurrentTime RatingLimit StopSafety StopWiringSpeedDouble InsulatedProtection ClassParallel Connection OptionWeightColours Available

Max230v300mm 450N 500mm 350N300mm 450N500mm 350N300mm, 500mm0.7 amps20%microswitchesthermic4 core~ 20mm/snoIP65yes1.75kgwhite / dark brown / silver

• Load transmission by rigid spindle• Very high speed and noiseless operation• High protection from atmospheric agents (IP 65)• Fixing end brackets included• Supplied with 1m cable• Two dovetail slides for an easy installation;

sliding bracket to be ordered separately

AU-MAX-230-300 Max 300mm 230vAU-MAX-230-500 Max 500mm 230v

BRAU-MAX-S Sliding brackets


230v

110v

450N 45kg

160mm/180mm/300mm


DIMENSIONS

71

D6 FCELIN

EA

R

ACTU

ATOR

206mm

65mm

145mm

80mm

30mm

206mm

59mm

50mm

32mm

57mm

VENT ENGINEERING


VENT ENGINEERING




230v

110v

450N 45kg

160mm/180mm/300mm

PRODUCT SUMMARY


72

D6 FCE


D6 230v230v450N 450N160, 180, 300mm0.7 amps3 minmicroswitchesthermic4 core~ 18mm/snoIP54yes1.66kg, 1.70kg, 1.75kgsilver

D6 110v110v450N 450N300mm0.7 amps3 minmicroswitchesthermic4 core~ 18mm/snoIP54yes1.75kgsilver

• Maintenance free• Noiseless Operation• Air-pollution resistant• Ease of mounting• Easy to install• Built-in anodised aluminium• Equipped with limit switches and relays for the


• Built in cutout• Complies with 73/23 LVD - 89/336 EMC


AD-D6-110-180 D6 FCE 180mm 110vAD-D6-110-300 D6 FCE 300mm 110vAD-D6-230-160 D6 FCE 160mm 230vAD-D6-230-180 D6 FCE 180mm 230vAD-D6-230-300 D6 FCE 300mm 230v


24v

1000N 100kg

500mm/750mm/1000mm


DIMENSIONS

73

FORCELIN

EA

R

ACTU

ATOR

39 max.min.

79 max.

42

Stroke

35

301+Stroke36.5

50

24

21

64 min.

ÿ48

35

36.5

50

VENT ENGINEERING


VENT ENGINEERING




24v

1000N 100kg

500mm/750mm/1000mm

PRODUCT SUMMARY



74

FORCE


Force24v1000N 1000N500mm,750mm,1000mm1 amps50%electronicelectronic2 core~ 6mm/snoIP65yes - special order2.5kg, 3kg, 3.25kgsilver

• Noiseless operation• Polarity inversion low-tension control• Possibility of parallel connection• Electronic stop in the end stroke and

intermediate positions• Supplied with fixing bracket and connector• Possibility of front or back fixing

• Back bracket to be ordered separately (under possibility of front and back fixings).

AU-F-500 Force 500mm 24vAU-F-750 Force 750mm 24vAU-F-1000 Force 1000mm 24v

BRAU-FORCE Back fixing bracket


230v

600N 60kg

180mm/225mm/300mm/500mm


DIMENSIONS

75

D20 FCELIN

EA

R

ACTU

ATOR

30mm

275mm

282mm 75mm

282mm

77mm

63mm

96mm

95mm

60mm

95mm

50mm

VENT ENGINEERING


VENT ENGINEERING




230v

600N 60kg

180mm/225mm/300mm/500mm

PRODUCT SUMMARY


76

D20 FCE


D20230v600N 600N180,225,300,500mm1.3 amps4 minmicroswitchesthermic4 core~ 22mm/snoIP44yes3.10kg, 3.12kg, 3.16kg, 3.40kgsilver

• Extensive travel possible• High Power• Maintenance free• Noiseless Operation• Air-pollution resistant• Ease of mounting• Body in anodised aluminium• Equipped with limit switches and relays for the


• Built-in cutout• Complies with 73/23 LVD - 89/336 EMC


AD-D20-230-225 D20 FCE 225mm 230vAD-D20-230-500 D20 FCE 500mm 230v


230v

2000N 200kg

180mm/300mm/400mm/500mm


DIMENSIONS

77

D30 FCELIN

EA

R

ACTU

ATOR

250mm L

Strok L

110m

m

290mm + L

Stroke L

180 0

300 120

400 220

500 320

94mm94mm

134mm

VENT ENGINEERING


VENT ENGINEERING




230v

2000N 200kg

180mm/300mm/400mm/500mm

PRODUCT SUMMARY


D30 FCE


D30230v2000N 2000N180, 300, 400, 500mm1.85 amps6 minmicroswitchesthermic4 core~ 13.5mm/snoIP40yes5.85kg, 6.13kg, 6.38kg, 6.60kgsilver

• Maximum Power• Maintenance free• Noiseless Operation• Ease of mounting• Body in anodised aluminium• Equipped with limit switches and relays for the


• Built-in cutout• Complies with 73/23 LVD - 89/336 EMC


AD-D30-230-180 D30 FCE 180mm 230vAD-D30-230-300 D30 FCE 300mm 230vAD-D30-230-400 D30 FCE 400mm 230vAD-D30-230-500 D30 FCE 500mm 230v

78


24v

650N 65kg

180mm/300mm


DIMENSIONS

ULYSSESLIN

EA

RAC

TUATO

R

+- +

-

308 + Stroke

61

15

ÿ34

68

10 44

Brown

Blue24V cc

Open Close

20202121

5757

various fixing points

79

VENT ENGINEERING


VENT ENGINEERING




24v

650N 65kg

180mm/300mm

PRODUCT SUMMARY



80


Traction Force

StrokeAbsorbed CurrentTime RatingLimit StopSafety StopWiringSpeed

Double InsulatedProtection ClassParallel Connection OptionWeightColours Available

Ulysses24v180mm 150N 300mm 650N180mm 150N300mm 650N180mm, 300mm1 amps50%electronicelectronic2 core~ 21 mm/s 180mm~ 6mm/s 300mmnoIP65yes2kgsilver

• Minimum size: external diameter 34 mm.• Load transmission by rigid spindle.• Low noise operation.• High protection from atmospheric agents (IP 65).• Supplied with fixing bracket and connector.

Front and back fixing possibility.• Back bracket to be ordered separately.• A kit to reduce the stroke is available.• Available on request a coupling control box for

two actuators 24Vdc on the same window.

AU-UL-24-650-180 Ulysses 180mm 24vAU-UL-24-650-300 Ulysses 300mm 24v

BRAU-ULYSSES Back bracket

ULYSSES

MIN 20

216

A

120

55

38.5

30

MAX 40

44

929

52


230v

24v

650N + 65kg

180mm/230mm/350mm/550mm/750mm/1000mm


DIMENSIONS

RACK R

AC

K

ACTU

ATOR

fixed bracket sliding bracket

81

44Stroke

180

230

350

550

750

1000

A

400

450

570

770

970

1220

VENT ENGINEERING


VENT ENGINEERING




230v

24v

650N + 65kg

180mm/230mm/350mm/550mm/750mm/1000mm

PRODUCT SUMMARY



82

RACK


Traction ForceStroke

Absorbed CurrentTime RatingLimit StopSafety StopWiringSpeedDouble InsulatedProtection ClassParallel Connection OptionWeightColours Available

Rack 24vRack 230v24v750N1000mm max. 350N750N180mm, 230mm, 350mm, 550mm, 750mm, 1000mm1 amps50%electronicelectronic2 core~ 8 mm/s noIP55yes2kgsilver

230v650N1000mm max. 350N650N180mm, 230mm, 350mm, 550mm, 750mm, 1000mm0.1 amp50%electronicelectronic4 core~ 8 mm/snoIP55yes2kgsilver

• 12mm for 750mm/1000mm square racktransmission.

• Noiseless operation• All the actuators can be used in the Dual-Rack

version by adding connecting rods and rack groupsfor the installation in particularly large windows

• High protection from atmospheric agents


• 110v available

AU-R-18-24 Rack 180mm 24vAU-R-18-230 Rack 180mm 230vAU-R-23-24 Rack 230mm 24vAU-R-23-230 Rack 230mm 230vAU-R-35-24 Rack 350mm 24vAU-R-35-230 Rack 350mm 230vAU-R-55-24 Rack 550mm 24vAU-R-55-230 Rack 550mm 230vAU-R-75-24 Rack 750mm 24vAU-R-75-230 Rack 750mm 230vAU-R-100-24 Rack 1000mm 24vAU-R-100-230 Rack 1000mm 230v

BRAU-R-LB-F Fixed lower bracketsBRAU-R-LS-S Sliding lower brackets

MIN 20

216

A

120

55

38.5

30

MAX 40

44

929

52


230v

24v

1300N+ 130kg+

180mm/230mm/350mm/550mm/750mm/1000mm


DIMENSIONS

DOUBLE & DUAL RACKR

AC

K

ACTU

ATOR

DUAL RACK

fixed bracket sliding bracket

44

83

Stroke

180

230

350

550

750

1000

A

400

450

570

770

970

1220

VENT ENGINEERING


VENT ENGINEERING




230v

24v

1300N+ 130kg+

180mm/230mm/350mm/550mm/750mm/1000mm

PRODUCT SUMMARY

PRODUCT CODES

DOUBLE & DUAL RACK


Traction ForceStroke

Absorbed CurrentTime RatingLimit StopSafety StopWiringSpeedDouble InsulatedProtection ClassParallel Connection OptionWeightColours Available

Double Rack 24vDouble Rack 230v24v1500N1000mm max. 350N1500N180mm, 230mm, 350mm, 550mm,750mm, 1000mm2 amps50%electronicelectronic2 core~ 8 mm/s noIP55yes2kgsilver

230v1300N1000mm max. 350N1300N180mm, 230mm, 350mm, 550mm,750mm, 1000mm0.2 amp50%electronicelectronic4 core~ 8 mm/snoIP55yes2kgsilver

• Particularly suitable to open domes and very large windows, eliminating the problem of instability

• Choice of connecting rods 1m, 1.5m and 2m.

AU-DBR-18-24 Double Rack 180mm 24vAU-DBR-18-230 Double Rack 180mm 230vAU-DBR-23-24 Double Rack 230mm 24vAU-DBR-23-230 Double Rack 230mm 230vAU-DBR-35-24 Double Rack 350mm 24vAU-DBR-35-230 Double Rack 350mm 230vAU-DBR-55-24 Double Rack 550mm 24vAU-DBR-55-230 Double Rack 550mm 230vAU-DBR-75-24 Double Rack 750mm 24vAU-DBR-75-230 Double Rack 750mm 230vAU-DBR-100-24 Double Rack 1000mm 24vAU-DBR-100-230 Double Rack 1000mm 230v

AU-DR-18-24 Dual Rack 180mm 24vAU-DR-18-230 Dual Rack 180mm 230vAU-DR-23-24 Dual Rack 230mm 24vAU-DR-23-230 Dual Rack 230mm 230vAU-DR-35-24 Dual Rack 350mm 24vAU-DR-35-230 Dual Rack 350mm 230vAU-DR-55-24 Dual Rack 550mm 24vAU-DR-55-230 Dual Rack 550mm 230vAU-DR-75-24 Dual Rack 750mm 24vAU-DR-75-230 Dual Rack 750mm 230vAU-DR-100-24 Dual Rack 1000mm 24vAU-DR-100-230 Dual Rack 1000mm 230v

PRODUCT CODE PRODUCT DESCRIPTION PRODUCT CODE PRODUCT DESCRIPTION

ACCESSORIES DESCRIPTION

84

AU-R-C1 1m Connecting rodAU-R-C1.5 1.5m Connecting rodAU-R-C2 2m Connecting rodBRAU-R-LB-F Fixed lower bracketsBRAU-R-LS-S Sliding lower brackets


230v

24v

600N+ 60kg+

180mm/230mm/350mm/550mm/750mm/1000mm


DIMENSIONS

85

S1 & S1 DUALR

AC

K

ACTU

ATOR

215mm

50.5mm

30mm

131.

5mm

43.5mm43.5mm

43.5mm

VENT ENGINEERING


VENT ENGINEERING




230v

24v

600N+ 60kg+

180mm/230mm/350mm/550mm/750mm/1000mm

PRODUCT SUMMARY

PRODUCT CODES

86

S1 & S1 DUAL

Voltage SupplyThrust ForceTraction ForceStroke

Absorbed CurrentTime RatingLimit StopSafety StopWiringSpeedDouble InsulatedProtection ClassParallel Connection OptionWeight

Colours Available

S1 230v S1 24v230v600N 600N180mm, 230mm, 350mm,550mm, 750mm, 1000mm0.10 amps5 minabsorptionthermal4 core~ 5mm/snoIP55yes0.74kg,0.82kg, 1.04kg,1.33kg, 1.63kg, 1.98kgsilver

24v800N 800N180mm, 230mm, 350mm, 550mm,750mm, 1000mm1 amps5 minabsorptionthermal2 core~ 12mm/snoIP55yes0.74kg,0.82kg, 1.04kg, 1.33kg,1.63kg, 1.98kgsilver

• Tandem operation available.• 230v and 24v power supply.• Electronic limit switch• Maintenance free• Complies with 73/23 LVD - 89/336 EMC


AD-S1-18-24 S1 180mm 24vAD-S1-18-230 S1 180mm 230vAD-S1-23-24 S1 230mm 24vAD-S1-23-230 S1 230mm 230vAD-S1-35-24 S1 350mm 24vAD-S1-35-230 S1 350mm 230vAD-S1-55-24 S1 550mm 24vAD-S1-55-230 S1 550mm 230vAD-S1-75-24 S1 750mm 24vAD-S1-75-230 S1 750mm 230vAD-S1-100-24 S1 1000mm 24vAD-S1-100-230 S1 1000mm 230v

AD-DS1-18-24 Dual S1 180mm 24vAD-DS1-18-230 Dual S1 180mm 230vAD-DS1-23-24 Dual S1 230mm 24vAD-DS1-23-230 Dual S1 230mm 230vAD-DS1-35-24 Dual S1 350mm 24vAD-DS1-35-230 Dual S1 350mm 230vAD-DS1-55-24 Dual S1 550mm 24vAD-DS1-55-230 Dual S1 550mm 230vAD-DS1-75-24 Dual S1 750mm 24vAD-DS1-75-230 Dual S1 750mm 230vAD-DS1-100-24 Dual S1 1000mm 24vAD-DS1-100-230 Dual S1 1000mm 230v

PRODUCT CODE PRODUCT DESCRIPTION PRODUCT CODE PRODUCT DESCRIPTION

TERMS AND CONDITIONSIn these conditions Ventec 100 Ltd is referred to as “the Company” and the person contracting with the Company is referred to as “the Customer”.

All contracts made by the Customer with the Company shall be on the terms hereof and the Customer shall not be entitled to rely upon any statement (other than the terms of this Contract) whether oral or written and whether express of implied given or made by or on behalf of theCompany.

AVAILABILITYAll delivery dates are subject to war strikes civil commotions lockouts breakdown of machinery or any other cause beyond the Company’s controland also to the Customer giving to the Company all particulars necessary for delivery to be made within any stated delivery times.

PRICESAll prices are subject to change without notice and are “exclusive of value added tax carriage and delivery charges”.

QUOTATIONSAny quotation given by the Company isa) To be regarded as an invitation for the Customer to make an offer and the quotation itself is not an offer by the Company andb) Subject to any fluctuation in the price to be paid by the Company for the goods import or any other duty and foreign exchange rates and also

subject to the availability of the goods to the Company.c) All quotations are valid for a period of 30 days unless otherwise agreed.

TERMSPayment shall be made by the Customer by the 21st day of the month following the date of invoice. If payment is not made on the due date theCompany shall have the right to require payment of interest on the outstanding amount at the rate of 3% per month from the due date until the dateof actual payment (whether before or after Judgement) and any discount which may have been given to the Customer will be disallowed and the fullprice payable in accordance with the terms of this condition.

The Customer hereby agrees to reimburse the Company on a full indemnity basis all costs and expenses incurred in either the repossession ofgoods sold to the Customer and not paid for or in the collection of payment for goods sold and delivered to the Customer.

OWNERSHIPa) The title to any goods purchased from the Company shall only pass to the Customer upon payment in full of the price thereof.b) Until such payment the Customer shall store the goods in such a way to show clearly they are the property of the Company.c) The Company reserves the right to repossess any of the goods and equipment to which it has title hereunder and for this purpose the Customer

hereby grants an irrevocable right and licence to the Company its servants and agents to enter upon all or any of the Customer’s premises withsuch transport as may be necessary during normal working hours to collect the said goods.

Notwithstanding that title to the goods has not passed to the Customer by reason of the foregoing the goods and equipment shall be at theCustomer’s risk from the time of delivery to him or to any carrier or agent acting on his behalf.

The right of the Company to recover possession of the goods from the Customer shall be in addition to all other rights the Company has against theCustomer.

WARRANTYa) The Company’s liability in respect of any faulty goods shall be limited to damage caused to the goods by the Company and shall not extend to any

defect in manufacture nor to any consequential loss or damage howsoever caused by such or any other defect.b) The Company shall not under any circumstances whatsoever be liable for any loss (which expression in this clause included injury damage or

delay) or for any consequential loss arising out of any cause whatsoever relating to the goods and in particular due to any malfunctioning of ordefect in or failure of any of the goods or any part thereof or any loss of the use of the goods or any part thereof.

c) Any warranties or conditions statutory or otherwise whether express or implied as to the quality or fitness for the purpose of the goods areexpressly excluded in so far as such exclusion is allowed at law.

d) This agreement shall unless otherwise stated be governed by the laws of England.

CLAIMSThe Customer shall inspect the goods and equipment immediately on delivery and shall within three days of such inspection give notice in writing tothe Company of any matter or thing by reason whereof it is alleged that the goods are not in accordance with this Contract. If the Customer shall failto give notice these said goods and equipment shall be deemed to be in all respects in accordance with this Contract.

RETURNSGoods supplied in accordance with Customer orders cannot be accepted for return without our written consent. If approval is given a handlingcharge will be made. Returned goods must be confirmed and carriage paid.

GUARANTEEOur products are guaranteed for a period of 12 months from date of invoice against electrical breakdown or mechanical failure resulting from defective materials and/or workmanship providing the breakdown or failure is not due to misuse or operation under adverse conditions. Any unitproving faulty and covered by the provisions of this guarantee must be returned to our works complete carriage paid, for examination when it will berepaired or replaced at our option, stating the relevant sales invoice no. Units that have been dismantled, or cables that have been cut or removed,are exempt from this guarantee.

Issue 2

Vent EngineeringTel 01202 744958 Fax 01202 733026 Email [email protected] Web www.vent.co.ukUnits 16c & 16f, Chalwyn Industrial Estate, Poole BH12 4PE

Importers of:

ventilation - vent.co.uk · 35 s f w h f = –w x –s 2 h s f w h f w f = – w 2 actuator stroke...

Documents