vertex detector options and r&d requirements upgrade dc meeting december 11, 2002 yuji goto...
TRANSCRIPT
![Page 1: Vertex Detector Options and R&D Requirements Upgrade DC Meeting December 11, 2002 Yuji Goto (RIKEN/RBRC) for the Silicon USG](https://reader035.vdocument.in/reader035/viewer/2022070411/56649f575503460f94c7b62a/html5/thumbnails/1.jpg)
Vertex Detector Optionsand R&D Requirements
Upgrade DC MeetingDecember 11, 2002
Yuji Goto (RIKEN/RBRC)for the Silicon USG
![Page 2: Vertex Detector Options and R&D Requirements Upgrade DC Meeting December 11, 2002 Yuji Goto (RIKEN/RBRC) for the Silicon USG](https://reader035.vdocument.in/reader035/viewer/2022070411/56649f575503460f94c7b62a/html5/thumbnails/2.jpg)
Strawman design
• Barrel– 1 pixel layer and 3 strip layers
• Endcap– 4 pixel layers
![Page 3: Vertex Detector Options and R&D Requirements Upgrade DC Meeting December 11, 2002 Yuji Goto (RIKEN/RBRC) for the Silicon USG](https://reader035.vdocument.in/reader035/viewer/2022070411/56649f575503460f94c7b62a/html5/thumbnails/3.jpg)
Strawman design
• Barrel– 1st pixel layer
• r=2cm, |z|<11.2cm• 1.3M channel = 1.3Mbit for 1-bit (binary) readout
– 2nd-4th strip layers• r=6, 8, 10cm, |z|<15cm• 360K channel = 2.9Mbit for 8-bit readout
![Page 4: Vertex Detector Options and R&D Requirements Upgrade DC Meeting December 11, 2002 Yuji Goto (RIKEN/RBRC) for the Silicon USG](https://reader035.vdocument.in/reader035/viewer/2022070411/56649f575503460f94c7b62a/html5/thumbnails/4.jpg)
R&D Items
• Strip sensor• Strip readout / Interface with PHENIX• Hybrid pixel• Hybrid pixel readout / Interface with PHENIX• Endcap hybrid pixel• Bump bonding / Thinning• Monolithic pixel• Support frame
![Page 5: Vertex Detector Options and R&D Requirements Upgrade DC Meeting December 11, 2002 Yuji Goto (RIKEN/RBRC) for the Silicon USG](https://reader035.vdocument.in/reader035/viewer/2022070411/56649f575503460f94c7b62a/html5/thumbnails/5.jpg)
Strip sensor
• Sensor by Zheng Li (BNL instr. div.)
x
u
x
u
GR’s
20 m Lines for Y-strip
Bonding pads for Y-strips205mx120 m
16 m lines for X-strip
GR’s Bonding pads for X-strips125 mx105 m
16 m Lines for X
![Page 6: Vertex Detector Options and R&D Requirements Upgrade DC Meeting December 11, 2002 Yuji Goto (RIKEN/RBRC) for the Silicon USG](https://reader035.vdocument.in/reader035/viewer/2022070411/56649f575503460f94c7b62a/html5/thumbnails/6.jpg)
Strip sensor
• Sensor by Zheng Li (BNL instr. div.)– DC coupling– full depletion at ~80 V – capacitance ~10 pF– leakage current ~10 nA
1nA
0.1 1 10 100 500
Bias voltage (V)
10 |-5
10 |-4
10 |-3
10 |-2
10 |-1
10 |0
Cur
rent
(uA
)
0.1 1 10 100 500
Bias voltage (V)
10 |-5
10 |-4
10 |-3
10 |-2
10 |-1
10 |0
Cur
rent
(uA
)
Strip Detector 1234-BY1, 400 um, 0.024 cm2/strip, 10 cm long
0.1 1 10 100 500
Bias voltage (V)
10 |1
10 |2
Cap
acita
nce
(pF)
Strip Detector 1234-BY1, 400 um, 0.024 cm2/strip, 10 cm long
![Page 7: Vertex Detector Options and R&D Requirements Upgrade DC Meeting December 11, 2002 Yuji Goto (RIKEN/RBRC) for the Silicon USG](https://reader035.vdocument.in/reader035/viewer/2022070411/56649f575503460f94c7b62a/html5/thumbnails/7.jpg)
Strip sensor• Ladder structure
– 5 sensors / ladder– 12 readout chips / sensor
• SVX4 or TGV+AMU/ADC
– cooling• SVX4: 3.5 mW/ch×360 Kch = 1.3 KW• SVX4: necessary to decrease leakage current …
– cabling• Cu (Al) / Polyimide hybrid for low material budget
– ladder matrrial• e.g. CFRP
![Page 8: Vertex Detector Options and R&D Requirements Upgrade DC Meeting December 11, 2002 Yuji Goto (RIKEN/RBRC) for the Silicon USG](https://reader035.vdocument.in/reader035/viewer/2022070411/56649f575503460f94c7b62a/html5/thumbnails/8.jpg)
Strip sensor
• Status– 400 m thickness and 250 m thickness– wire-bonding (of both Al and Au)– glues between the sensor and the base board– leakage current– VA2 readout chip operation– test beam at KEK
• position resolution• detection efficiency• charge correlation property• two track separation efficiency
![Page 9: Vertex Detector Options and R&D Requirements Upgrade DC Meeting December 11, 2002 Yuji Goto (RIKEN/RBRC) for the Silicon USG](https://reader035.vdocument.in/reader035/viewer/2022070411/56649f575503460f94c7b62a/html5/thumbnails/9.jpg)
SensorVA2 chip
Al wire-bonding
Au wire-bonding
SMT board
Fanout board
Base board
Control+Signalcable
Powercable
Bias
![Page 10: Vertex Detector Options and R&D Requirements Upgrade DC Meeting December 11, 2002 Yuji Goto (RIKEN/RBRC) for the Silicon USG](https://reader035.vdocument.in/reader035/viewer/2022070411/56649f575503460f94c7b62a/html5/thumbnails/10.jpg)
Strip sensor
• Fanout
![Page 11: Vertex Detector Options and R&D Requirements Upgrade DC Meeting December 11, 2002 Yuji Goto (RIKEN/RBRC) for the Silicon USG](https://reader035.vdocument.in/reader035/viewer/2022070411/56649f575503460f94c7b62a/html5/thumbnails/11.jpg)
Strip sensor
#u-strip: 1-384ch #x-strip: 385-768ch
Ch1: Trigger w/ Scinti’s
ChM: Ch3-Ch4
Ch3: Analog pos.
Ch4: Analog neg.
Cosmic ray signal
![Page 12: Vertex Detector Options and R&D Requirements Upgrade DC Meeting December 11, 2002 Yuji Goto (RIKEN/RBRC) for the Silicon USG](https://reader035.vdocument.in/reader035/viewer/2022070411/56649f575503460f94c7b62a/html5/thumbnails/12.jpg)
Strip sensor
X-ADC (ch)
u-A
DC
(ch
)
Measured position Charge correlation
![Page 13: Vertex Detector Options and R&D Requirements Upgrade DC Meeting December 11, 2002 Yuji Goto (RIKEN/RBRC) for the Silicon USG](https://reader035.vdocument.in/reader035/viewer/2022070411/56649f575503460f94c7b62a/html5/thumbnails/13.jpg)
Strip sensor readout / Interface with PHENIX
• Technical options– SVX4 chip (preamp + digitized pipeline)
• AC coupling– must take care of accumulated leakage current
– by frequent reset ? (at the abort gap ?)
– operation temperature lower than the room temperature ?
– TGV preamp + AMU/ADC• DC coupling• output drive capability ?
– local processing or driving the preamp signals on kapton cables
– readout time ?– buffering capability ?
![Page 14: Vertex Detector Options and R&D Requirements Upgrade DC Meeting December 11, 2002 Yuji Goto (RIKEN/RBRC) for the Silicon USG](https://reader035.vdocument.in/reader035/viewer/2022070411/56649f575503460f94c7b62a/html5/thumbnails/14.jpg)
Strip sensor readout / Interface with PHENIX
• Technical options– data management ?
• FPGA (rad-hard ?) or digital-ASIC ?• low power data transmission that avoid using G-Links
• R&D– design concept– data transmission to the DCM– list of parts– build and test a prototype
![Page 15: Vertex Detector Options and R&D Requirements Upgrade DC Meeting December 11, 2002 Yuji Goto (RIKEN/RBRC) for the Silicon USG](https://reader035.vdocument.in/reader035/viewer/2022070411/56649f575503460f94c7b62a/html5/thumbnails/15.jpg)
Strip sensor readout / Interface with PHENIX
• Schedule / Manpower– design concept in FY2003– ORNL internal funding ?
• Milestones / Decision points– secure funding– data management and transmission– design completion– prototype construction– prototype testing
![Page 16: Vertex Detector Options and R&D Requirements Upgrade DC Meeting December 11, 2002 Yuji Goto (RIKEN/RBRC) for the Silicon USG](https://reader035.vdocument.in/reader035/viewer/2022070411/56649f575503460f94c7b62a/html5/thumbnails/16.jpg)
CDF-II silicon upgrade for Run-IIB
• Stave– ~1.5% radiation length per stave
Peek tube
water channel
cable busSilicon detector
hybrid substratereadout chip pitch adapter
C fiber
![Page 17: Vertex Detector Options and R&D Requirements Upgrade DC Meeting December 11, 2002 Yuji Goto (RIKEN/RBRC) for the Silicon USG](https://reader035.vdocument.in/reader035/viewer/2022070411/56649f575503460f94c7b62a/html5/thumbnails/17.jpg)
CDF-II silicon upgrade for Run-IIB
![Page 18: Vertex Detector Options and R&D Requirements Upgrade DC Meeting December 11, 2002 Yuji Goto (RIKEN/RBRC) for the Silicon USG](https://reader035.vdocument.in/reader035/viewer/2022070411/56649f575503460f94c7b62a/html5/thumbnails/18.jpg)
CDF-II silicon upgrade for Run-IIB
• Port card
![Page 19: Vertex Detector Options and R&D Requirements Upgrade DC Meeting December 11, 2002 Yuji Goto (RIKEN/RBRC) for the Silicon USG](https://reader035.vdocument.in/reader035/viewer/2022070411/56649f575503460f94c7b62a/html5/thumbnails/19.jpg)
Hybrid pixel
• ALICE1 chip– 32 x 256 pixels of 425 mm (z) x 50 mm (rf)– size: 13.6 mm x 15.95 mm
![Page 20: Vertex Detector Options and R&D Requirements Upgrade DC Meeting December 11, 2002 Yuji Goto (RIKEN/RBRC) for the Silicon USG](https://reader035.vdocument.in/reader035/viewer/2022070411/56649f575503460f94c7b62a/html5/thumbnails/20.jpg)
Hybrid pixel• Ladder structure
– 8 chips/ladder + 1 pilot
– 20 ladders for 1st layer• 8192 x 8 x 20 = 1.3 Mchannel
ladder
pilot chip
pixel chips
data bus with chip select
optical link
cross section
side view
![Page 21: Vertex Detector Options and R&D Requirements Upgrade DC Meeting December 11, 2002 Yuji Goto (RIKEN/RBRC) for the Silicon USG](https://reader035.vdocument.in/reader035/viewer/2022070411/56649f575503460f94c7b62a/html5/thumbnails/21.jpg)
Hybrid pixel
• NA60 pixel detector– pixel detector developed at CERN for application in
ALICE and LHCb– ALICE1LHCb chip: 8192 pixels of 50 µm x 425 µm,
radiation hard– 16 NA60 specific 4- and 8-chip planes, 10 MHz clk,
200 ns strobe– PCI readout by NA60– Linux based DAQ
![Page 22: Vertex Detector Options and R&D Requirements Upgrade DC Meeting December 11, 2002 Yuji Goto (RIKEN/RBRC) for the Silicon USG](https://reader035.vdocument.in/reader035/viewer/2022070411/56649f575503460f94c7b62a/html5/thumbnails/22.jpg)
Hybrid pixel
• NA60 pixel detector
1.0 cm
The first 4-chip pixel plane
Hit map
![Page 23: Vertex Detector Options and R&D Requirements Upgrade DC Meeting December 11, 2002 Yuji Goto (RIKEN/RBRC) for the Silicon USG](https://reader035.vdocument.in/reader035/viewer/2022070411/56649f575503460f94c7b62a/html5/thumbnails/23.jpg)
Hybrid pixel• NA60 pixel detector
– first three 4-chip pixel planes constructed– test of vertex spectrometer with 20 and 30 GeV/c Pb
beams on Pb targets, preparing for physics run in 2003
– tracking and vertex reconstruction with pixel planes
![Page 24: Vertex Detector Options and R&D Requirements Upgrade DC Meeting December 11, 2002 Yuji Goto (RIKEN/RBRC) for the Silicon USG](https://reader035.vdocument.in/reader035/viewer/2022070411/56649f575503460f94c7b62a/html5/thumbnails/24.jpg)
Hybrid pixel readout
• ALICE1 chip readout– 32 parallel lines, each reads 256 channels serially– readout speed: 10 MHz 25.6 s/chip– data buffer for 4 events
• PHENIX standard – 5 events
– no data format (header, footer, parity bits, ...)– no zero-suppression
• must be taken care at somewhere (pilot, FEM, or DCM ?)
– L1 trigger be in timing – 5.5 sec in ALICE• 4 sec in PHENIX – OK
![Page 25: Vertex Detector Options and R&D Requirements Upgrade DC Meeting December 11, 2002 Yuji Goto (RIKEN/RBRC) for the Silicon USG](https://reader035.vdocument.in/reader035/viewer/2022070411/56649f575503460f94c7b62a/html5/thumbnails/25.jpg)
Hybrid pixel readout
• ALICE pilot chip multi-chip module (PCMCM)– readout 10 chips serially 256 s/event in ALICE
• must 40 or 80 s/event in PHENIX
– slow control (via JTAG)
• R&D– parallelize readout ?
• 2 or more pilot chips in a ladder• sequential parallel readout• …
– development of our own pilot chip and/or other FEMs• KEK experts are interested in the development• data bus is a critical issue
![Page 26: Vertex Detector Options and R&D Requirements Upgrade DC Meeting December 11, 2002 Yuji Goto (RIKEN/RBRC) for the Silicon USG](https://reader035.vdocument.in/reader035/viewer/2022070411/56649f575503460f94c7b62a/html5/thumbnails/26.jpg)
Hybrid pixel readout / Interface with PHENIX
• FEM for hybrid pixel readout– data receiver from pixel detector– data processor
• FPGA for flexible data compression and data formatting ?
– data transmitter to the DCM– slow controller for setup and monitoring of the pixel
detectors• CCB (central control board) to separate the slow control ?
• FEM for strip readout ?– same FEM, different receiver
![Page 27: Vertex Detector Options and R&D Requirements Upgrade DC Meeting December 11, 2002 Yuji Goto (RIKEN/RBRC) for the Silicon USG](https://reader035.vdocument.in/reader035/viewer/2022070411/56649f575503460f94c7b62a/html5/thumbnails/27.jpg)
Hybrid pixel readout / Interface with PHENIX
• R&D– FPGA code development with a programmable fake
data source• readout with the DC-FEM DAQ chain• zero-suppression at the FEM ?
– transmitter / receiver interface– fake souce ALICE pixel prototype
• slow control system to be integrated in the PHENIX framework
• slow control at CCB ?
– prototype boards of FEM and CCB
![Page 28: Vertex Detector Options and R&D Requirements Upgrade DC Meeting December 11, 2002 Yuji Goto (RIKEN/RBRC) for the Silicon USG](https://reader035.vdocument.in/reader035/viewer/2022070411/56649f575503460f94c7b62a/html5/thumbnails/28.jpg)
Hybrid pixel readout / Interface with PHENIX
• Schedule / Manpower– all decisions by end of FY2004
• 2 MSI students• 1 postdoc (1/2 by DOE fund)• 1/4 electrical engineer (by DOE fund)
![Page 29: Vertex Detector Options and R&D Requirements Upgrade DC Meeting December 11, 2002 Yuji Goto (RIKEN/RBRC) for the Silicon USG](https://reader035.vdocument.in/reader035/viewer/2022070411/56649f575503460f94c7b62a/html5/thumbnails/29.jpg)
Hybrid pixel readout / Interface with PHENIX• Milestones
– FY2003• define pixel-FEM and FEM-DCM interface• evaluate use pixel FEM for other PHENIX silicon detectors• readout fake data source by DC FEM to DCM• develop data processor FPGA code for zero-suppression• obtain ALICE pixel prototype• implement interface and readout single ALICE pixel-chip• adapt slow control to PHENIX framework
– FY2004• design readout system for central pixel barrel• decide to build separate CCB or incorporate into FEM• prototype PHENIX pixel FEM (and CCB)• test multi pixel-chip ladder with PHENIX FEM (and CCB)
prototype
![Page 30: Vertex Detector Options and R&D Requirements Upgrade DC Meeting December 11, 2002 Yuji Goto (RIKEN/RBRC) for the Silicon USG](https://reader035.vdocument.in/reader035/viewer/2022070411/56649f575503460f94c7b62a/html5/thumbnails/30.jpg)
Endcap hybrid pixel
• Plan– utilize the same sensor technology and the same chip
that is used for the barrel hybrid pixel– change the topology to match the endcap
requirements
• Issues– increased capacitance load on the readout chip– sensor pad topology– routing of control lines– location of the pilot chip
![Page 31: Vertex Detector Options and R&D Requirements Upgrade DC Meeting December 11, 2002 Yuji Goto (RIKEN/RBRC) for the Silicon USG](https://reader035.vdocument.in/reader035/viewer/2022070411/56649f575503460f94c7b62a/html5/thumbnails/31.jpg)
Endcap hybrid pixel
• Schedule / Manpower– begin design modifications in FY2004– finish prototyping in FY2005– who and where ? – answers by the review …
• Milestones– define the technology by the review next year– complete prototyping by the middle of FY2005
![Page 32: Vertex Detector Options and R&D Requirements Upgrade DC Meeting December 11, 2002 Yuji Goto (RIKEN/RBRC) for the Silicon USG](https://reader035.vdocument.in/reader035/viewer/2022070411/56649f575503460f94c7b62a/html5/thumbnails/32.jpg)
Bump bonding / Thinning
• Technical options– FNAL-led efforts
• McNC North Carolina / Unitive• AIT Hong-Kong
– CERN-led efforts• IZM Berlin• VTT Finland
![Page 33: Vertex Detector Options and R&D Requirements Upgrade DC Meeting December 11, 2002 Yuji Goto (RIKEN/RBRC) for the Silicon USG](https://reader035.vdocument.in/reader035/viewer/2022070411/56649f575503460f94c7b62a/html5/thumbnails/33.jpg)
Monolithic pixel
• Technical options– epitaxial monolithic detectors by LEPSI– float-zone monolithic detectors by Bonn and Munich
![Page 34: Vertex Detector Options and R&D Requirements Upgrade DC Meeting December 11, 2002 Yuji Goto (RIKEN/RBRC) for the Silicon USG](https://reader035.vdocument.in/reader035/viewer/2022070411/56649f575503460f94c7b62a/html5/thumbnails/34.jpg)
Support frame
• Technical options– conceptual design by the engineering team that
designed the ATLAS support frame (HYTEC)– recommendation as to the best technical approach
and the areas that need further study and prototyping
• Schedule– conceptual design complete in mid FY2003
• model concept by the review … (not the final)
– R&D and prototyping finished by mid FY2005
![Page 35: Vertex Detector Options and R&D Requirements Upgrade DC Meeting December 11, 2002 Yuji Goto (RIKEN/RBRC) for the Silicon USG](https://reader035.vdocument.in/reader035/viewer/2022070411/56649f575503460f94c7b62a/html5/thumbnails/35.jpg)
Support frame• Mockup of the barrel support structure
– made by CFPR– Precision, strength, deformation and material budget
to be measured