equipmentpractika.ua/wp-content/uploads/practika_bank_equpment_-eng.pdf · vestibule-sluice is a...
TRANSCRIPT
BANKEQUIPMENT
Office:15, Metallistov Str.,Kyiv, 03057, Ukrainetel./fax: +38 044 241 83 18/19/20/21
Production Facilities:20 A, Malinskaya Str.,Kyiv, 03164, Ukrainetel./fax: +38 044 423 55 80/82
e-mail: [email protected]://www.practika.com.ua
This State Standard completely equal to EN 1143-1:1997/A2:2002.
The Ukrainian legal norms that set the banks technical security equipping rules are completely equal to the European analogs and the protection requirements set in were copied from the European Standards.This fact makes the resistance levels comparison quite easier
1. “Regulations on requirements concerning technical condition and organization of bank premises protection of Ukraine”
2. “Designing, building, equipping rules by methods of technical bank conso lidation” (Ministry of domestic affairs order on 25.10.02#1090).
3. “Secure storage units. Vault, vault's doors, safes, ATM safes. Requirements, classification and test's methods for resistance to burglary” State Standard of Ukraine 4012.1:2005.
PRACTIKA obtains the following documents, necessary for banking security equipment manufacturing:
? Certificate of conformance of the Quality Management System according to the requirements of the State Standard of Ukraine ISO 9001-2001
? Permission of the Security Service of Ukraine to work with information constituting the State secret
? License of the State Committee of Ukraine for Construction to perform special works (designing of bank institutions, manufacture and assembly of main types of products)
? Certificates of the State Center for Certification of Security Means within the Central Department of the State Security Service of the Ministry of Internal Affairs of Ukraine
? Certification of trade mark
? Patent for production prototype of bank door.
PRACTIKA produces different types of cash-in-transit vehicles:
VW Transporter T-5 FORD Transit 350
VW Сrafter 35 Mercedes Sprinter 313
VW Caddy Kasten
GAZ 2705
Chevrolet Niva
IVECO
Mercedes Axor
Toyota Hilux
MAZ
KAMAZ
PRACTIKA – Bank's armoring
The Research and Production Association “PRACTIKA” was founded in 1993. At present, it is the leading national manufacturer at the market of technical strengthening means.
PRACTIKA contains 4 production divisions:
? Bank equipment? Armoured vechicles ? Fireproof equipment? Equipment for nuclear station
In 2002, the Company completed the quality management system introduction in accordance with ISO 9001 requirments that guarantees the highest quality of products.
PRACTIKA is:
? office premises-800 sq.m.? factory-7500 sq.m.? design construction-and-erection department? testing laboratory? security-back-room(first)department? personnel-more than 300 employees
Content:
Monolithic vaults
Modular vaults
Vault doors
Single-winged bank safes
Safes-collectors
Double-winged bank safes
Depositary bank safes
Depositary cells
Office safes
Archival boxes
Screened premises
Screened doors
Screened server safes
Armoured cabins
Collection sluice-boxes
Cash-units
Transmissive shuts
Shielding constructions
Customers
National Bank of UkiraineManagement of national security service at Ministry of Domestic Affairs of UkrainePROMINVESTBAMKState Saving Bank of UkraineBank for Social Development UKROSOTSBANK The State Export-Import Bank of UkraineVAB bank Agrarian Commercial Bank Alfa-BankBasis BankBank BoguslavBank NRB Bank Petrokommerts-UkraineBank Reneisance Capital LLC Bank Russain StandartBank UniversaBrokBusinessBank BTA BankEastern-European BankVTB BankDongorbankIkar-BankIMEKSBANKINDUSTRIALBANKIndustrial-export bankKiev BankBank Kievska RusClearing Hause BankCommercial Bank Active-BankCredit-Dnepr BankKreditprombankCREDOBANKMegabankMetallurgNadra BankNational Investments BankOTP BankPARTNER-BANKThe first investment bank First Ukrainian International BankSouthern BankPolikombankPoltava-bankPraveks-Bank Prime-BankProCredit BankRaiffaisen Bank AvalRodovid BankSEB Bank Syntez BankStarokievskyy BankUkrainsky Promislovy BankUkrGasBankBank UkrSibbankUniversal Bank for Development and PartnershipFactorial BankFinance and Credit BankFINEXBANKFinrostbank Forum BankExpress-BankERSTE BANK
Azerbaijan Republic "Triada LLC"Azerbaijan Republic "Azerdemiroilbank"Azerbaijan Republic "Atrabank"Azerbaijan Republic "Republic"
National bank of Georgia Republic of Georgia "Bank Kartu" Pridnistrovian Moldovian Republic "Mortgage"Pridnistrovian Moldovian Republic "Agroprombank" Pridnistrovian Moldovian Republic "Gas Prombank”
BANK EQUIPMENTCustomers:
Purpose
The monolithic vault is a ferroconcrete (reinforced concrete) construction with a special armouring inside. The thickness and design of the construction is defined according to the required break-in resistance class.
The monolithic vault is produced by the unceasing concreting method directly on the place of usage: at the open space or inside the existing building.
Monolithic vaults
V, VII, IX, X, XI and XIII
Assembling variants
- vestibule-sluices are mounted by the modular system, that allows to create any configuration and design- vestibule-sluices consist of a window block with an armoured tray and two doors equipped with
electromagnetic locking system; the doors are to be mounted into reinforced wall embrasures - vestibule-sluices consist of security-staff cabin and inside partitions with doors- vestibule-sluices consist of guard post and checkpoint with automatic sliding doors
This State Standard completely equal to EN 1143-1:1997/A2:2002
protection levelsaccording to SSU requirements 4012.1-2001;SSU 4012.3-2001
Protective constructions
Purpose
Design
Door types
Vestibule-sluice is a security post with entrance lobby. Entrance and exit are realized through two doors with electro-magnetic lock system, whose operation is carried out from the security post.
Vestibule-sluice is produced from the aluminum reinforced shape with armoured glazing. Shut sets allow to organize the pass by means of identity cards and inspection of the suspicious objects and documents.
- with the straight folds- mechanical plowing doors- mechanical doors with telescopic arrangement blocking- nonautomatic doors with electromagnetic blocking system- single-winged and double-winged doors- with different glazing variants
Set of work and services
Additional equipment
Class raising of already existing vault
PRACTIKA developed the unique technology of break-in resistance class raising of already existing vaults, using special reinforcing panels that are set inside the already existing vault.
Reinforcing panel class is determined particularly for every object.
? deposit boxes
? boxes for cash keeping
? dressing works
? light and power supply system installation
? development of project documentation
? producing of vault covering of appropriate break-in resistance level
? complement with bank doors of appropriate break-in resistance level
? lock installation
? customer staff training
1, 2, 3protection levels
А
В
С
D
Е
Modular vault
V, VII, IX, XI
according to the State Standard of Ukraine 4012.1-2001
Modular production is made in factory conditions under the control of the State Center for Certification of the Ministry of Internal Affairs of Ukraine.
Modular vault is constructed by the minimal set of typical elements (panels and door blocks) produced by PRRACTIKA under plant conditions.
Modular design allows to build the vaults of any required configuration and space, including the mounting of the vault in the existing buildings.
The vault if needed can be dismantled and installed in the new place.
Advantages in comparison with monolithic vaults:
? possibility to produce the vaults of any configuration and space? possibility to build the vaults in any conditions, including already existing buildings? small panel thickness? greatly smaller weight and occupied area? efficient installation (10-14 days)? possibility of construction dismantling and transferring it to the new area? possibility of perspective widening or reduction of existing vault? possibility of the existing vaults strengthening by the additional panels
The vaults assemblage is implemented by the small mechanization means that allow to provide the installation far from the factory, in other regions at a low price.
Mobile transmissive tray
Tray is made from non corrosive steel and completed with transmissive shut from “black” metal and stationary armed panel (thickness- 18-22 mm.) that is built into window frame.
Single tray
Tray is made from non corrosive steel and “black” metal, dyed with polymeric dye.
Consists of two trays (for money and documents).
Double tray
Sizes
by consumer request min 130
by consumer request min 120
by consumer request min 308
by consumer request min 458
window ofcashman
box for documents panel
outside box oftransmission device
box for coin bags,and bills packing
1. Outside size of outside box chest, mm.: 476 x 246 x 146 (L. x W. x D.)2. Inside size of cash box, mm.: 170 x 222 x 101 (L. x W. x D.)3. Inside size of documents box, mm.: 160 x 222 x 20 (L. x W. x D.)
protection levels
Tt-A4 Tt-A5
Transmissive trays
Permanent transmissive trays
Transmissive trays are produced from non-corrosive steel and are built into the deck from laminated splint-slab. Steel tray painted with polymeric dye is completed to the set.
The whole set of work includes: Additional equipment
? project works? production, delivery and assembling of the vaults? complement with bank doors ? complement with ventilation canals and leading-in canals of
signalization cables? locks setting ? consumer staff training
? depositary boxes? boxes for cash keeping? dressing work? installation of power supply and light system
Sizes T-A4 T-A5
Vault doors
Purpose
The vault doors are destined for depositaries, valuable vaults, archives and other special security regime premises with the limited access.
Design
The vault door is a block completed for installation into the monolithic or module vault.The vault door block consists of:
The external armored door design provides the special additional protection against the mechanical break-in attempts.
High protective characteristics are provided by the internal composite door infilling, spatial girth armoring and ultra strong concrete.
The external armored door is fixed to the common frame by the external reinforced hinges produced by PRACTIKA.
frame (door box) that is to be fixed into the wall embrasure external armored door internal grill door that opens inside in
PATENTED
Cash desk hall
Armoured cash-unit
Operation hall
Operation hall consists of operation post with bank employees working places and client zone. Front side of the operation hall is made as cash-unit and completed with all necessary furniture.
To underline the individuality of every costumer, the front side of cash-cabin or operation post is decorated with different high-quality dressing materials:
- particle board laminated - artificial stone - natural stone.
Nowadays banks try to protect their employees and that is why PRACTIKA offers armoured cash-units with bullet-proof glazing (resistance level from 1 till 4).
By projection of these cash-desks all NBU requirements are met. Such armoured units have simple design that can be easily dismantled if it is necessary. Cashier working place is completed with furniture that is needed for the comfortable cashier work and qualitive service.
Cash desk hall consists of the cash desk cabin with front side on a client zone and cabin for converting of big amount of cash by the client.
Cash cabin consists of:? A set of partitions (in case of armouring, they are
reinforced with armoured plates)? Glazing (antivandal or bullet-proof from the front
side and 5 mm glass partitions between the cash cabins)
? Client desk with transmission chute (made out of the non-corrosive steel or artificial stone)
? Cashier working place: desk, pedestal with central lock ,shelf for keyboard and module for system block.
V, VII, IX and XI
in accordance with the State Standard of Ukraine 4012.1.
The vault door correspond to the requirements of the National Bank of Ukraine and the State Security Office of the Ministry of the Internal Affairs of Ukraine.
protection levels
Cash units
Blocking
Blocking of the door is realized with the help of the girth rail mechanism, that consists of the 10 moveable girth rails (6- horizontal and two girth rails upwards and two girth rails downwards) with diameter-40mm. Girth rails drive is realized by lever system of the central blocking mechanism with the help of rotary wheel.
Girth rail from the side of the vertical hinges is performed as a ledge along the height of the door leaf. Device that moves the girth rails is blocked by two not connected between each other locks of high secrecy “MAUER”. Every lock is completed with two keys.
Door
Heck
Heck has level lock of high secrecy (AZBE(Spain) BKS(Germany)) that is blocked on the internal and external sides.
Additional services
The replacement of the old doors of already existing vaults by new certified ones according to SSU 4012.1 without destruction of existing embrasures.
Face of any bank is a cash-desk hall and operation hall. They form the first impression of the bank Nowadays banks want to be recognizable, that is why they develop their own corporative style and try to save it forming their branch network.
Our designers will create interior of the operation and cash-desk halls for Your bank. They also will create working places for your employees in any style taking into account all nuances of the premise planning.
Work with every client is individual. Complete set of the work consists of project development, production and installation of the construction.
Requirements to the cash units1. “Cash unit – is complex of connected bank premises in which operations with cash and other values
are carried out. It consists of internal premises of cash unit, cash-desk hall and collector box.2. Internal premises of the cash unit are:
- Vaults with before vault premise - Premise of the cash-desk manager- Cashier cabins- Premise for bank notes and coins transferring - Premise for acceptance, delivery of the values to the collectors- Premises for keeping packing and subsidiary materials- Premises for keeping personnel staffs of the cash-desk workers- Lounge premise for cash-desk workers- Sanitary-hygienic premises for cash-desk workers
3. Internal premises of the cash-unit have to be isolated from other premises of the bank”Unapproved access to the internal premises of the cash unit have to be excluded.
Single-winged bank safe Collector sluice-boxes
Design
Design
Design of the box consists of the steel basket with two doors made out of the reinforced aluminium shape with armoured steel settings.
Armoured glasses provide visual control of the loading and unloading process of the sluice on the both sides.
Opening of the doors is carried out manually. Electromechanical door locks are operated by the control panel from the cashier side.
Overall size and colour are individual according to the Customer request.
? safe body is a double layer steel construction filled with the reinforced concrete
? the important zones of the doors and safe body are reinforced additionally
? possibility of fastening to the floor with the help of holdfasts according to the international requirements
? special reinforcing door hinges allow the door opening up to 180 degrees
? equipment for the sealing
? opening for the alarm cables leading-in
? polymeric wear proof covering “Dupont” (France); selection of the colour according to the RAL catalogue standard palette.
1, 2, 3
I - VIII protection levels
This State Standard completely equal to EN 1143-1:1997/A2:2002
protection levels
according to the State Standard of Ukraine 4012.1-2001
Armoured cabins
Purpose
Construction
Supply set
Armoured cabin is assembled out of the separate modules directly at the operation place or delivered there totally finished.
Basic model size – 1.5x1.5x2.3(h)m. By the request of the consumer sizes can be changed
Module armoured cabin cost doesn't exceed the costs of the widely used unprotected kiosks.
? Cash desk box with armoured glass and transmissive shut? talk-back equipment? ventilator? internal light? lock with girth rail blocking system? safe
? currency exchange stations? cash desks? security cabins
Reliability
Blocking
Performance variants
Extra
Safe particular feature is that protective qualities aren't reduced even after cutting of the door hinges. Locks are protected from the drilling and are blocked by the splitting-out attempt .
Notice that buying one big safe you have a possibility to keep bigger
amount of values and it is economically sound.
? module
? monolithic
? cassette
? By the customer request safes can be completed with trizer (build by blocking element)
? Possibility of non-standard safes production with individual complement
? Installation of the locks with hold up opening system
? particularized certificated locks “MAUER”,” Sergent and Greenlear”, ”STUV” with distributing mechanism
? complete ledge on hinge side
? girth rail mechanism developed by PRACTIKA has been used for many years
rotection levels1, 2, 3p
Single-winged bank safes
Single-winged bank safes characteristics
Resistance level Mass, kg Volume, L
Shelves quantity
Locks quantity
External sizes, mm Internal sizes, mm
height width depth height width depth
Type and size of the safe
Type and size
External sizes, mm Internal sizes, mm
height depthwidth height depthwidth
Construction and basic supply sets:
Additional equipment:
? safe – external protective body? screen- internal body? cable lead-in? ventilators ? electric filters? screened door (right opening) with mechanic lock? panel with special cutoffs and waveguide filters for
cables leading –in twisted fume STP – 20 items, fiber-optic cables- 10 items
? plug block (220 V- 3 items)? perforate corners (482.6 mm(19)(4 items)
? conditioning system? automatic fire fighting system ? installation shelves? electric equipment ? network inference-suppression filter
(Ip=10-a,Up=220 B)? ventilators panel (6 items), thermostat
Individual sizes and painting are possible.
Its possible to install into the safe with protection level II
Screened server safes Safes-collectors
Purpose
Charecteristics:
Provides protection
? Compactness ? Reliability? Reasonable price? Usability? Installation and dismantling during 1 hour ? Protection of the contents from the fire and external encroachment? Up-to-date design? Absence of project and building works? Accordance with the NBU's requirements to the screening effectiveness
? from thermal and fire influence? from leakage of information (screening effectiveness- no less then 20 db)? from influence of low-speed electromagnetic fields? from high-frequency signals of power supply net
? protection of the computer network elements (servers, work stations)
? safety ensuring of the confidential information and stability of functioning of communication systems in the adverse conditions.
Purpose
Construction
Principe of operation
Reliability
? locks of high secrecy of Germany and USA production? equipped with girth rail blocking system? consists of two steel bodies
In case of need (a big amount of cash was gathered or burglary threat arose) the cashier pushes the box and cash gets the safe-store becoming unavailable for the cashier and for the burglar.
Safe-collector consists of two sections:
? lower- safe- store, ordinary safe, that is opened in a safe time to carry out the cash
? upper – box, that reminds an element of cash register
Safe-collector is particularly designed for using it in the trade places where large amount of cash is gathered during the day and night and in the same time it is not enough protection from the burglary provided by others guards.
The correspond to the requirements of the National Bank of Ukraine and the State Security Office of the Ministry of the Internal Affairs of Ukraine.
screened server safes
Double-winged bank safes
The door is destined for localization of electromagnetic radiation and providing a gangway in the screened premise. In a closed state the door provides a set efficient of screening by means of creation of the permanent electric contact between the ceiling and door frame round the all perimeter.
The basic assembly units of the door are a frame, door leaf with the catch gear, caging with lock and inset element.
II-VIII
according to SSU requirements 4012.1-2001;SSU 4012.3-2001
Bank safes of the Secure System design series are certificated by the State Committee of Ukraine for technical regulation and consumer policy of the State Certification System.
Complete work set
Shielding doors
Purpose
Design
Electric contact is provided by tinned braid (inset element) that is set into the screened stripe.
Along the whole outline of the door adjacency a contact band from non-corrosive steel is placed on the door leaf. A contact band is fixed to the trimmed surface of the door leaf with rivets (50 mm distance).
Bearing component of the door is a frame. It is weld-fabricated construction, made out of the bent shape.
Door frame is welded on directly to the metal panels of the screened premise by permanent junction. For the comfort of the exploitation there is a door-knob from the external side of the blade.
The door leaf is painted by powder dye.
? designed works? production and installation? ceiling? hanging AMSTRONG- steel painting panel with build-in lamps? walls ? steel painting panel, colour-light-gray RAL7035? flour?splint-slab? antistatic linoleum ? wiring works? screening effectiveness measuring ? commission
Protection level
Depends on level protection*
500 - 1100 L
Screened premises
? walls and coverings modules? screened door-blocks? waveguide filters? electric interference-suppresion filters? girth rail blocking mechanism? locks: mechanical and coded
Purpose
Technical characteristics
Construction
Kitting
? wall and ceiling modules are made out of the steel (thickness-1.5 mm.)? screened door-block? cables leading-in? waveguide and electric filters
Frequency operating range- from 10 KHz to 1000MHZScreening efficiency – up to 80 db
Screened premises are intended to prevent the leakage of information by the influence of electromagnetic impulses and industrial disturbances.
View from above
Technical characteristics of folding bank safes
Resistance level Mass, kg Volume, L
Shelves quantity
Locks quantity
External sizes, mm Internal sizes, mm
height width depth height width depth
Frequency operating range- from 10 KHz to 1000MHZScreening efficiency – up to 80 db
Deposit bank safes Archival boxes
Purpose
Deposit bank safes are destined for keeping values and documents in individual deposit cells and correspond to SSU 4012.1
Construction
? the body of the safe is a steel two-ply construction that is filled with armoured concrete
? the important zones of doors and safe body are reinforced additionally? possibility to fix the safe to the floor with the help of anchors according to the NBU
and SSU 4012.1 requirements? special reinforcing door hinges allow the door opening up to 180 degrees ? equipment for sealing? opening for the alarm cables leading-in? polymeric wear proof covering “Dupont” (France)? single-winged and double-winged safes production (internal volume of double-
winged safes is from 500 up to 1100 litres)? completed with deposit modules with various cells quantity
Purpose
Construction
Blocking
Extra
Specification
Archival boxes are destined for long keeping of different account, bank, technical and other documentation.
Special internal mechanical door locks (cross-bar system) with three side clothing blocks.
? ? hole for fixing box to the floor
hole for alarm cables leading-in
? Produced out of the high quality steel (thickness 1.5 mm) and have welded design of the body
? additionally reinforced body and box doors? special reinforcing door hinges allow the door opening up to 180 degrees? equipment for sealing? polymeric wear proof covering
Name\brand External size, mm Mass, kg Locks quantity
II - VIII protection levels
This State Standard completely equal to EN 1143-1:1997/A2:2002
according to the State Standard of Ukraine 4012.1-2001
Box
Office safes
Purpose
Office safes are destined for keeping values, documents, stamps in the office premises.
Construction
Blocking
Additional equipment
Specification
Locks with distributing girth rail mechanism- in three sides
? opening for the alarm cables leading-in? opening for the box fixing to the floor ? special lock-up section
? safe body is a steel construction? special door hinges allow the door opening up to 180 degrees? equipment for sealing? polymeric wear proof covering? single-winged production
Safe particular feature is that protective qualities aren't reduced even after cutting of the door hinges. Locks are protected from the drilling and are blocked by the splitting-out attempt .
Reliability Blocking
Additional equipment
Deposit cells can be completed with special shuts.Selection of the colour according to the standard palette or RAL
catalogue.Locks setting with hold-up opening function.
? particularized certified locks “Mauer”, ”Sergen and Greenleaf” ,”STUV” with distributing mechanism (6 girth rails(25mm.) – on three sides, complete ledge on hinge side.
? special protection from lock splitting-out ? girth rail mechanism is worked out by PRACTIKA and is
used many years.
quantity of locks
weight, kgexternal sizes, mmname/mark
Case-safe depositary
Sizes of depositary safes
height depthwidth, mm , mm , mm
View from above
of safe
of safe
Depositary cells
Purpose
Depositary cells are destined for keeping of customer documents and values (money, jewelleries) .Depositary cells can be used in the depositaries of bank institutions, in the luggage offices.
Construction
? the body of the post and depositary cell is made out of the steel (thikness-2mm)
? reinforced internal panel
? hatches are made out of the 8 mm steel
? panels are made out of the 1mm steel
Blocking
Cells sizes
Trays
Blocking is carried out according to the principle “customer key” and “banker key”. Locks from leading world producers “Steinbach and Volumann” ( German) and “Abloy” (Finland).
By customer request depositary cells can be supplied with metal penals for more convenient use of the cell.Penal body construction is produced from the 0.8mm. metal and is completed with a lid.Besides penals can be supplied with hinged lock.
Depositary boxes can be completed with depositary cells (height 75 mm, 100 m, 200 mm, 400 mm, 600 mm) in any other complement.
height, mm width, mm depth, mm
Depositary cells
Purpose
Depositary cells are destined for keeping of customer documents and values (money, jewelleries) .Depositary cells can be used in the depositaries of bank institutions, in the luggage offices.
Construction
? the body of the post and depositary cell is made out of the steel (thikness-2mm)
? reinforced internal panel
? hatches are made out of the 8 mm steel
? panels are made out of the 1mm steel
Blocking
Cells sizes
Trays
Blocking is carried out according to the principle “customer key” and “banker key”. Locks from leading world producers “Steinbach and Volumann” ( German) and “Abloy” (Finland).
By customer request depositary cells can be supplied with metal penals for more convenient use of the cell.Penal body construction is produced from the 0.8mm. metal and is completed with a lid.Besides penals can be supplied with hinged lock.
Depositary boxes can be completed with depositary cells (height 75 mm, 100 m, 200 mm, 400 mm, 600 mm) in any other complement.
height, mm width, mm depth, mm
Office safes
Purpose
Office safes are destined for keeping values, documents, stamps in the office premises.
Construction
Blocking
Additional equipment
Specification
Locks with distributing girth rail mechanism- in three sides
? opening for the alarm cables leading-in? opening for the box fixing to the floor ? special lock-up section
? safe body is a steel construction? special door hinges allow the door opening up to 180 degrees? equipment for sealing? polymeric wear proof covering? single-winged production
Safe particular feature is that protective qualities aren't reduced even after cutting of the door hinges. Locks are protected from the drilling and are blocked by the splitting-out attempt .
Reliability Blocking
Additional equipment
Deposit cells can be completed with special shuts.Selection of the colour according to the standard palette or RAL
catalogue.Locks setting with hold-up opening function.
? particularized certified locks “Mauer”, ”Sergen and Greenleaf” ,”STUV” with distributing mechanism (6 girth rails(25mm.) – on three sides, complete ledge on hinge side.
? special protection from lock splitting-out ? girth rail mechanism is worked out by PRACTIKA and is
used many years.
quantity of locks
weight, kgexternal sizes, mmname/mark
Case-safe depositary
Sizes of depositary safes
height depthwidth, mm , mm , mm
View from above
of safe
of safe
Deposit bank safes Archival boxes
Purpose
Deposit bank safes are destined for keeping values and documents in individual deposit cells and correspond to SSU 4012.1
Construction
? the body of the safe is a steel two-ply construction that is filled with armoured concrete
? the important zones of doors and safe body are reinforced additionally? possibility to fix the safe to the floor with the help of anchors according to the NBU
and SSU 4012.1 requirements? special reinforcing door hinges allow the door opening up to 180 degrees ? equipment for sealing? opening for the alarm cables leading-in? polymeric wear proof covering “Dupont” (France)? single-winged and double-winged safes production (internal volume of double-
winged safes is from 500 up to 1100 litres)? completed with deposit modules with various cells quantity
Purpose
Construction
Blocking
Extra
Specification
Archival boxes are destined for long keeping of different account, bank, technical and other documentation.
Special internal mechanical door locks (cross-bar system) with three side clothing blocks.
? ? hole for fixing box to the floor
hole for alarm cables leading-in
? Produced out of the high quality steel (thickness 1.5 mm) and have welded design of the body
? additionally reinforced body and box doors? special reinforcing door hinges allow the door opening up to 180 degrees? equipment for sealing? polymeric wear proof covering
Name\brand External size, mm Mass, kg Locks quantity
II - VIII protection levels
This State Standard completely equal to EN 1143-1:1997/A2:2002
according to the State Standard of Ukraine 4012.1-2001
Box
Screened premises
? walls and coverings modules? screened door-blocks? waveguide filters? electric interference-suppresion filters? girth rail blocking mechanism? locks: mechanical and coded
Purpose
Technical characteristics
Construction
Kitting
? wall and ceiling modules are made out of the steel (thickness-1.5 mm.)? screened door-block? cables leading-in? waveguide and electric filters
Frequency operating range- from 10 KHz to 1000MHZScreening efficiency – up to 80 db
Screened premises are intended to prevent the leakage of information by the influence of electromagnetic impulses and industrial disturbances.
View from above
Technical characteristics of folding bank safes
Resistance level Mass, kg Volume, L
Shelves quantity
Locks quantity
External sizes, mm Internal sizes, mm
height width depth height width depth
Frequency operating range- from 10 KHz to 1000MHZScreening efficiency – up to 80 db
Double-winged bank safes
The door is destined for localization of electromagnetic radiation and providing a gangway in the screened premise. In a closed state the door provides a set efficient of screening by means of creation of the permanent electric contact between the ceiling and door frame round the all perimeter.
The basic assembly units of the door are a frame, door leaf with the catch gear, caging with lock and inset element.
II-VIII
according to SSU requirements 4012.1-2001;SSU 4012.3-2001
Bank safes of the Secure System design series are certificated by the State Committee of Ukraine for technical regulation and consumer policy of the State Certification System.
Complete work set
Shielding doors
Purpose
Design
Electric contact is provided by tinned braid (inset element) that is set into the screened stripe.
Along the whole outline of the door adjacency a contact band from non-corrosive steel is placed on the door leaf. A contact band is fixed to the trimmed surface of the door leaf with rivets (50 mm distance).
Bearing component of the door is a frame. It is weld-fabricated construction, made out of the bent shape.
Door frame is welded on directly to the metal panels of the screened premise by permanent junction. For the comfort of the exploitation there is a door-knob from the external side of the blade.
The door leaf is painted by powder dye.
? designed works? production and installation? ceiling? hanging AMSTRONG- steel painting panel with build-in lamps? walls ? steel painting panel, colour-light-gray RAL7035? flour?splint-slab? antistatic linoleum ? wiring works? screening effectiveness measuring ? commission
Protection level
Depends on level protection*
500 - 1100 L
Screened server safes Safes-collectors
Purpose
Charecteristics:
Provides protection
? Compactness ? Reliability? Reasonable price? Usability? Installation and dismantling during 1 hour ? Protection of the contents from the fire and external encroachment? Up-to-date design? Absence of project and building works? Accordance with the NBU's requirements to the screening effectiveness
? from thermal and fire influence? from leakage of information (screening effectiveness- no less then 20 db)? from influence of low-speed electromagnetic fields? from high-frequency signals of power supply net
? protection of the computer network elements (servers, work stations)
? safety ensuring of the confidential information and stability of functioning of communication systems in the adverse conditions.
Purpose
Construction
Principe of operation
Reliability
? locks of high secrecy of Germany and USA production? equipped with girth rail blocking system? consists of two steel bodies
In case of need (a big amount of cash was gathered or burglary threat arose) the cashier pushes the box and cash gets the safe-store becoming unavailable for the cashier and for the burglar.
Safe-collector consists of two sections:
? lower- safe- store, ordinary safe, that is opened in a safe time to carry out the cash
? upper – box, that reminds an element of cash register
Safe-collector is particularly designed for using it in the trade places where large amount of cash is gathered during the day and night and in the same time it is not enough protection from the burglary provided by others guards.
The correspond to the requirements of the National Bank of Ukraine and the State Security Office of the Ministry of the Internal Affairs of Ukraine.
screened server safes
Single-winged bank safes
Single-winged bank safes characteristics
Resistance level Mass, kg Volume, L
Shelves quantity
Locks quantity
External sizes, mm Internal sizes, mm
height width depth height width depth
Type and size of the safe
Type and size
External sizes, mm Internal sizes, mm
height depthwidth height depthwidth
Construction and basic supply sets:
Additional equipment:
? safe – external protective body? screen- internal body? cable lead-in? ventilators ? electric filters? screened door (right opening) with mechanic lock? panel with special cutoffs and waveguide filters for
cables leading –in twisted fume STP – 20 items, fiber-optic cables- 10 items
? plug block (220 V- 3 items)? perforate corners (482.6 mm(19)(4 items)
? conditioning system? automatic fire fighting system ? installation shelves? electric equipment ? network inference-suppression filter
(Ip=10-a,Up=220 B)? ventilators panel (6 items), thermostat
Individual sizes and painting are possible.
Its possible to install into the safe with protection level II
Armoured cabins
Purpose
Construction
Supply set
Armoured cabin is assembled out of the separate modules directly at the operation place or delivered there totally finished.
Basic model size – 1.5x1.5x2.3(h)m. By the request of the consumer sizes can be changed
Module armoured cabin cost doesn't exceed the costs of the widely used unprotected kiosks.
? Cash desk box with armoured glass and transmissive shut? talk-back equipment? ventilator? internal light? lock with girth rail blocking system? safe
? currency exchange stations? cash desks? security cabins
Reliability
Blocking
Performance variants
Extra
Safe particular feature is that protective qualities aren't reduced even after cutting of the door hinges. Locks are protected from the drilling and are blocked by the splitting-out attempt .
Notice that buying one big safe you have a possibility to keep bigger
amount of values and it is economically sound.
? module
? monolithic
? cassette
? By the customer request safes can be completed with trizer (build by blocking element)
? Possibility of non-standard safes production with individual complement
? Installation of the locks with hold up opening system
? particularized certificated locks “MAUER”,” Sergent and Greenlear”, ”STUV” with distributing mechanism
? complete ledge on hinge side
? girth rail mechanism developed by PRACTIKA has been used for many years
rotection levels1, 2, 3p
Single-winged bank safe Collector sluice-boxes
Design
Design
Design of the box consists of the steel basket with two doors made out of the reinforced aluminium shape with armoured steel settings.
Armoured glasses provide visual control of the loading and unloading process of the sluice on the both sides.
Opening of the doors is carried out manually. Electromechanical door locks are operated by the control panel from the cashier side.
Overall size and colour are individual according to the Customer request.
? safe body is a double layer steel construction filled with the reinforced concrete
? the important zones of the doors and safe body are reinforced additionally
? possibility of fastening to the floor with the help of holdfasts according to the international requirements
? special reinforcing door hinges allow the door opening up to 180 degrees
? equipment for the sealing
? opening for the alarm cables leading-in
? polymeric wear proof covering “Dupont” (France); selection of the colour according to the RAL catalogue standard palette.
1, 2, 3
I - VIII protection levels
This State Standard completely equal to EN 1143-1:1997/A2:2002
protection levels
according to the State Standard of Ukraine 4012.1-2001
Cash units
Blocking
Blocking of the door is realized with the help of the girth rail mechanism, that consists of the 10 moveable girth rails (6- horizontal and two girth rails upwards and two girth rails downwards) with diameter-40mm. Girth rails drive is realized by lever system of the central blocking mechanism with the help of rotary wheel.
Girth rail from the side of the vertical hinges is performed as a ledge along the height of the door leaf. Device that moves the girth rails is blocked by two not connected between each other locks of high secrecy “MAUER”. Every lock is completed with two keys.
Door
Heck
Heck has level lock of high secrecy (AZBE(Spain) BKS(Germany)) that is blocked on the internal and external sides.
Additional services
The replacement of the old doors of already existing vaults by new certified ones according to SSU 4012.1 without destruction of existing embrasures.
Face of any bank is a cash-desk hall and operation hall. They form the first impression of the bank Nowadays banks want to be recognizable, that is why they develop their own corporative style and try to save it forming their branch network.
Our designers will create interior of the operation and cash-desk halls for Your bank. They also will create working places for your employees in any style taking into account all nuances of the premise planning.
Work with every client is individual. Complete set of the work consists of project development, production and installation of the construction.
Requirements to the cash units1. “Cash unit – is complex of connected bank premises in which operations with cash and other values
are carried out. It consists of internal premises of cash unit, cash-desk hall and collector box.2. Internal premises of the cash unit are:
- Vaults with before vault premise - Premise of the cash-desk manager- Cashier cabins- Premise for bank notes and coins transferring - Premise for acceptance, delivery of the values to the collectors- Premises for keeping packing and subsidiary materials- Premises for keeping personnel staffs of the cash-desk workers- Lounge premise for cash-desk workers- Sanitary-hygienic premises for cash-desk workers
3. Internal premises of the cash-unit have to be isolated from other premises of the bank”Unapproved access to the internal premises of the cash unit have to be excluded.
Vault doors
Purpose
The vault doors are destined for depositaries, valuable vaults, archives and other special security regime premises with the limited access.
Design
The vault door is a block completed for installation into the monolithic or module vault.The vault door block consists of:
The external armored door design provides the special additional protection against the mechanical break-in attempts.
High protective characteristics are provided by the internal composite door infilling, spatial girth armoring and ultra strong concrete.
The external armored door is fixed to the common frame by the external reinforced hinges produced by PRACTIKA.
frame (door box) that is to be fixed into the wall embrasure external armored door internal grill door that opens inside in
PATENTED
Cash desk hall
Armoured cash-unit
Operation hall
Operation hall consists of operation post with bank employees working places and client zone. Front side of the operation hall is made as cash-unit and completed with all necessary furniture.
To underline the individuality of every costumer, the front side of cash-cabin or operation post is decorated with different high-quality dressing materials:
- particle board laminated - artificial stone - natural stone.
Nowadays banks try to protect their employees and that is why PRACTIKA offers armoured cash-units with bullet-proof glazing (resistance level from 1 till 4).
By projection of these cash-desks all NBU requirements are met. Such armoured units have simple design that can be easily dismantled if it is necessary. Cashier working place is completed with furniture that is needed for the comfortable cashier work and qualitive service.
Cash desk hall consists of the cash desk cabin with front side on a client zone and cabin for converting of big amount of cash by the client.
Cash cabin consists of:? A set of partitions (in case of armouring, they are
reinforced with armoured plates)? Glazing (antivandal or bullet-proof from the front
side and 5 mm glass partitions between the cash cabins)
? Client desk with transmission chute (made out of the non-corrosive steel or artificial stone)
? Cashier working place: desk, pedestal with central lock ,shelf for keyboard and module for system block.
V, VII, IX and XI
in accordance with the State Standard of Ukraine 4012.1.
The vault door correspond to the requirements of the National Bank of Ukraine and the State Security Office of the Ministry of the Internal Affairs of Ukraine.
protection levels
Transmissive trays
Permanent transmissive trays
Transmissive trays are produced from non-corrosive steel and are built into the deck from laminated splint-slab. Steel tray painted with polymeric dye is completed to the set.
The whole set of work includes: Additional equipment
? project works? production, delivery and assembling of the vaults? complement with bank doors ? complement with ventilation canals and leading-in canals of
signalization cables? locks setting ? consumer staff training
? depositary boxes? boxes for cash keeping? dressing work? installation of power supply and light system
Sizes T-A4 T-A5
А
В
С
D
Е
Modular vault
V, VII, IX, XI
according to the State Standard of Ukraine 4012.1-2001
Modular production is made in factory conditions under the control of the State Center for Certification of the Ministry of Internal Affairs of Ukraine.
Modular vault is constructed by the minimal set of typical elements (panels and door blocks) produced by PRRACTIKA under plant conditions.
Modular design allows to build the vaults of any required configuration and space, including the mounting of the vault in the existing buildings.
The vault if needed can be dismantled and installed in the new place.
Advantages in comparison with monolithic vaults:
? possibility to produce the vaults of any configuration and space? possibility to build the vaults in any conditions, including already existing buildings? small panel thickness? greatly smaller weight and occupied area? efficient installation (10-14 days)? possibility of construction dismantling and transferring it to the new area? possibility of perspective widening or reduction of existing vault? possibility of the existing vaults strengthening by the additional panels
The vaults assemblage is implemented by the small mechanization means that allow to provide the installation far from the factory, in other regions at a low price.
Mobile transmissive tray
Tray is made from non corrosive steel and completed with transmissive shut from “black” metal and stationary armed panel (thickness- 18-22 mm.) that is built into window frame.
Single tray
Tray is made from non corrosive steel and “black” metal, dyed with polymeric dye.
Consists of two trays (for money and documents).
Double tray
Sizes
by consumer request min 130
by consumer request min 120
by consumer request min 308
by consumer request min 458
window ofcashman
box for documents panel
outside box oftransmission device
box for coin bags,and bills packing
1. Outside size of outside box chest, mm.: 476 x 246 x 146 (L. x W. x D.)2. Inside size of cash box, mm.: 170 x 222 x 101 (L. x W. x D.)3. Inside size of documents box, mm.: 160 x 222 x 20 (L. x W. x D.)
protection levels
Tt-A4 Tt-A5
Protective constructions
Purpose
Design
Door types
Vestibule-sluice is a security post with entrance lobby. Entrance and exit are realized through two doors with electro-magnetic lock system, whose operation is carried out from the security post.
Vestibule-sluice is produced from the aluminum reinforced shape with armoured glazing. Shut sets allow to organize the pass by means of identity cards and inspection of the suspicious objects and documents.
- with the straight folds- mechanical plowing doors- mechanical doors with telescopic arrangement blocking- nonautomatic doors with electromagnetic blocking system- single-winged and double-winged doors- with different glazing variants
Set of work and services
Additional equipment
Class raising of already existing vault
PRACTIKA developed the unique technology of break-in resistance class raising of already existing vaults, using special reinforcing panels that are set inside the already existing vault.
Reinforcing panel class is determined particularly for every object.
? deposit boxes
? boxes for cash keeping
? dressing works
? light and power supply system installation
? development of project documentation
? producing of vault covering of appropriate break-in resistance level
? complement with bank doors of appropriate break-in resistance level
? lock installation
? customer staff training
1, 2, 3protection levels
Purpose
The monolithic vault is a ferroconcrete (reinforced concrete) construction with a special armouring inside. The thickness and design of the construction is defined according to the required break-in resistance class.
The monolithic vault is produced by the unceasing concreting method directly on the place of usage: at the open space or inside the existing building.
Monolithic vaults
V, VII, IX, X, XI and XIII
Assembling variants
- vestibule-sluices are mounted by the modular system, that allows to create any configuration and design- vestibule-sluices consist of a window block with an armoured tray and two doors equipped with
electromagnetic locking system; the doors are to be mounted into reinforced wall embrasures - vestibule-sluices consist of security-staff cabin and inside partitions with doors- vestibule-sluices consist of guard post and checkpoint with automatic sliding doors
This State Standard completely equal to EN 1143-1:1997/A2:2002
protection levelsaccording to SSU requirements 4012.1-2001;SSU 4012.3-2001
PRACTIKA – Bank's armoring
The Research and Production Association “PRACTIKA” was founded in 1993. At present, it is the leading national manufacturer at the market of technical strengthening means.
PRACTIKA contains 4 production divisions:
? Bank equipment? Armoured vechicles ? Fireproof equipment? Equipment for nuclear station
In 2002, the Company completed the quality management system introduction in accordance with ISO 9001 requirments that guarantees the highest quality of products.
PRACTIKA is:
? office premises-800 sq.m.? factory-7500 sq.m.? design construction-and-erection department? testing laboratory? security-back-room(first)department? personnel-more than 300 employees
Content:
Monolithic vaults
Modular vaults
Vault doors
Single-winged bank safes
Safes-collectors
Double-winged bank safes
Depositary bank safes
Depositary cells
Office safes
Archival boxes
Screened premises
Screened doors
Screened server safes
Armoured cabins
Collection sluice-boxes
Cash-units
Transmissive shuts
Shielding constructions
Customers
National Bank of UkiraineManagement of national security service at Ministry of Domestic Affairs of UkrainePROMINVESTBAMKState Saving Bank of UkraineBank for Social Development UKROSOTSBANK The State Export-Import Bank of UkraineVAB bank Agrarian Commercial Bank Alfa-BankBasis BankBank BoguslavBank NRB Bank Petrokommerts-UkraineBank Reneisance Capital LLC Bank Russain StandartBank UniversaBrokBusinessBank BTA BankEastern-European BankVTB BankDongorbankIkar-BankIMEKSBANKINDUSTRIALBANKIndustrial-export bankKiev BankBank Kievska RusClearing Hause BankCommercial Bank Active-BankCredit-Dnepr BankKreditprombankCREDOBANKMegabankMetallurgNadra BankNational Investments BankOTP BankPARTNER-BANKThe first investment bank First Ukrainian International BankSouthern BankPolikombankPoltava-bankPraveks-Bank Prime-BankProCredit BankRaiffaisen Bank AvalRodovid BankSEB Bank Syntez BankStarokievskyy BankUkrainsky Promislovy BankUkrGasBankBank UkrSibbankUniversal Bank for Development and PartnershipFactorial BankFinance and Credit BankFINEXBANKFinrostbank Forum BankExpress-BankERSTE BANK
Azerbaijan Republic "Triada LLC"Azerbaijan Republic "Azerdemiroilbank"Azerbaijan Republic "Atrabank"Azerbaijan Republic "Republic"
National bank of Georgia Republic of Georgia "Bank Kartu" Pridnistrovian Moldovian Republic "Mortgage"Pridnistrovian Moldovian Republic "Agroprombank" Pridnistrovian Moldovian Republic "Gas Prombank”
BANK EQUIPMENTCustomers:
BANKEQUIPMENT
Office:15, Metallistov Str.,Kyiv, 03057, Ukrainetel./fax: +38 044 241 83 18/19/20/21
Production Facilities:20 A, Malinskaya Str.,Kyiv, 03164, Ukrainetel./fax: +38 044 423 55 80/82
e-mail: [email protected]://www.practika.com.ua