MATR IX

Instructionmanual

Slick 3C-V2, Slick 4C-V2, Slick 5C-V2, Slick 6C-V2

C O M P O N E N T

2

OWNERS MANUAL

CAUTION

Congratulations on purchasing your VIBE speakers. Please read this manual in order to fully understand how to get the best results from this product and ensure that all advice on how to look after the product is followed.

Thank you for buying VIBE, we hope you enjoy listening to your product as much as we enjoyed creating it.

DO NOT EXPOSE THIS PRODUCT TO DAMP OR MOISTUREor damage to the product.BEFORE WIRING DISCONNECT THE CABLE FROM THE POSITIVE BATTERY TERMINAL -failure to do so may result in electric shock or injury.ENSURE GOOD AND CORRECT CONNECTIONS - failure to make the correct connections may

DO NOT USE ANY FUNCTIONS OF THIS EQUIPMENT THAT MAY TAKE YOUR CONCENTRA-TION AWAY FROM DRIVING YOUR VEHICLE -may result in an accident. For prolonged setting up, make sure that your vehicle is stationary and in a safe location.KEEP THE VOLUME AT A LEVEL SO YOU CAN STILL HEAR OUTSIDE NOISE - failure to do this may result in an accident. VIBE equipment is capable of producing sound levels that can per-manently damage your hearing. VIBE recommends caution when listening at high volume. For safe and enjoyable listening the sound should be comfortable and clear without distortion.

CAUTIONNever connect any speaker lead to the car chassis. This can cause severe damage to your speaker

Before drilling or cutting any holes, investigate the layout of your vehicle thoroughly.Use caution when working near the fuel / hydraulic lines and electrical wiring.Observe the correct polarity when wiring, improper phasing may cause a loss of bass response.Ensure that no moving parts catch on the speaker or grill (e.g. window or door handles, or window glass inside the door)

INSTALLATION

tank to prevent causing any damage.

3

LIMITED WARRANTY

All VIBE products carry a full 12 month warranty, valid from the date of the original receipt and proof of purchase. In order to validate this warranty, the online warranty card should be completed within seven days of the original purchase date. The original receipt and packaging should be retained for this twelve month period. If the product develops a problem any stage during the warranty period,it should be returned to the point of purchase in it’s original packaging, and complete with no items missing. If the store is unable to repair the product it may have to be returned to VIBE. A full description of VIBE’s warranty information can be found on our website:

www.vibeaudio.co.uk/warranty

WHAT IS NOT COVERED

radiation.

be considered abuse.

INTERNATIONAL WARRANTYcountry’s warranty policies. www.vibeaudio.co.uk/warranty

WARNINGVIBE equipment is capable of sound pressure levels that can cause permanent damage to your hearing and those around you. Please use common sense when listening to your audio system and practice safe sound.

COPYRIGHT-

trade dress may not be used in connection with any product or service that is not VIBE’s, in any manner that is likely to cause confusion among customers or in any manner that disparages or discredits VIBE. All other trademarks not owned by VIBE or its subsidiaries that appear in this manual are the property

-sentatives will be liable for damages arising out of or in connection with the use of this manual or the information, content, materials or products included.This is a comprehensive limitation of liability that applies to all damages of any kind, including (without limitation) compensatory, direct, indirect or

representatives.

4

WOOFER INSTALLATION GUIDELINES

WOOFER INSTALLATION

standard vehicle speakers. Please use the mounting depth and hole cut dimensions as detailed in this manual for guidance.

place it over the speaker and screw through both the grill and the speaker using the provided screws. Be careful not to over tighten the screws as it may cause damage to the grill.

5

TWEETER INSTALLATION GUIDELINES

SURFACE MOUNT INSTALLATION

Try and take into account the following when locating a suitable position.For optimum staging try and locate a position that is higher than the woofer but within twelve

It is vital that the tweeter is adjusted so that it is focused towards the listener.

position.Using the base, mark the two mounting holes and the hole for the wire to pass through.

and ensure that the hole cut for the cable is big enough and will not cause the cable to become chaffed in any way.Pass the tweeter cable through the bottom of the base and through the previously drilled hole.

6

FLUSH MOUNT INSTALLATION

FIGURE A

FIGURE B

See Figure A)

and mark around it.

damaged.

The second requires the use of the metal strip provided. (See Figure B)

and mark around it.

damaged.

handles.

strip.

7

WIRING CONNECTIONS TO AN OEM OR AFTERMARKET HEADUNIT

WIRING CONNECTIONS TO AN EXTERNAL AMPLIFIER

attached to the crossover and the tweeter.

attached to the crossover.

that correct polarity is observed. Positive: Black / white stripe Negative: Black

attached to the crossover and the tweeter.

attached to the crossover.

vehicle ensuring that correct polarity is observed. Positive: Black / white stripe Negative: Black

8

UK TECHNICAL ENQUIRIES

INTERNATIONAL TECHNICAL ENQUIRIES For international technical support please contact the distribution agent for your country.

Please visit www.vibeaudio.co.uk/contact for more details.

Call 09067031420Calls cost 50p per minute. Call costs correct at date of publication (01/02/12)

All calls are recorded for training purposes.

9

SPECIFICATION

component kit2-way3.5“ (90mm)40 watts120 watts20 watts RMS87dB80Hz - 25kHz 4 Ohms1.4”(39mm)3.1”(80mm)1”(25mm)Ferrite3.5ozY30Slick Stereo 2Slick Stereo 4

component kit2-way4“ (100mm)50 watts150 watts25 watts RMS88dB66Hz - 25kHz 4 Ohms1.7”(44mm)3.7”(94mm)1”(25mm)Ferrite5.3ozY30Slick Stereo 2Slick Stereo 4

component kit2-way5.25“ (130mm)70 watts210 watts35 watts RMS90dB60Hz - 25kHz 4 Ohms1.9”(48mm)4.5”(114mm)1”(25mm)Ferrite10ozY30Slick Stereo 2Slick Stereo 4

component kit2-way6.5“ (165mm)80 watts240 watts40 watts RMS91dB54Hz - 25kHz 4 Ohms1.8”(46mm)5.7”(144mm)1”(25mm)Ferrite10ozY30Slick Stereo 2Slick Stereo 4

t kit

SSLLIICCK K 3c3c

component kit

SSLLIICCK K 4c4c

component kit

SSLLIICCK K 5c5ccomponent kit

SSLLIICCK K 6c6c

Model code: SLICK3C-V2 SLICK4C-V2 SLICK5C-V2 SLICK6C-V2

10

NOTES:

11

NOTES:

www.vibeaudio.co.uk