vibratory feeder gb
TRANSCRIPT
Danske Bank A/S Tel.: +45 63 61 61 00 / Fax: +45 63 61 62 00 SKAKO CONCRETE A/S
Account No.: 3574 3100020300 Tel. service: +45 70 26 26 45 DK-5600 FaaborgIBAN Account: DK2030003100020300 e-mail: [email protected] CVR-No.: DK-6442 7512
www.skako.com
Technical specification
Vibratory feeder type FCE Feeder for aggregate proportioning
Feeder
size
W/L0
Capacity
kg/sec.
2)
Dimensions trough profile
1)
Vib
rator typ
e 1)
Weig
ht kg
Installation requirements
(mm)
Fixing holes
0º 6º 8º Width (W)
Height (H)
L0 L8 H0 H8 Hv S0 S8 A B C K
FCE
040/0050M3NL
15 18 19 400 160 8D 80 500 475 335 430 635 170 220 500 580 450 650 8xØ18
FCE
040/0100M3NL
20 24 26 400 160 20D 120 1000 980 360 510 745 170 220 500 580 450 650 8xØ18
FCE
056/0071M3NL
33 41 44 560 225 20D 180 710 690 485 620 860 300 380 710 800 610 870 8xØ22
FCE
056/0125M3NL
35 43 46 560 225 50D 310 1250 1210 460 680 1015 300 380 710 800 610 870 8xØ22
FCE
080/0100M3NL
77 94 100 800 315 50D 440 1000 950 650 850 1150 365 475 1000 1100 2x425 1200 12Ø22
FCE
080/0160M3NL
82 100 105 800 315 100D 640 1600 1550 660 930 1310 365 475 1000 1100 2x425 1200 12Ø22
Generally: Connection piece for moisture probe Coating: Galvanized
2) The capacities stated are valid for naturally moist sand 0-3 mm – by bulk density 1.6 t/m³. 3) In feeders with steel plate wear lining the capacity is reduced by approx. 25%.
SKAKO CONCRETE reserves the right to change or improve the above data and specifications
Danske Bank A/S Tel.: +45 63 61 61 00 / Fax: +45 63 61 62 00 SKAKO CONCRETEAccount No.: 3100 3100020300 Tel. service: +45 70 26 26 45 DK-5600 Faaborg
IBAN Account: DK2030003100020300 e-mail: [email protected] CVR-No.: DK-6442 7512 www.skako.com
Technical specification
Vibratory feeder type FCE-T
Feeder for aggregate proportioning
Feeder
size
Capacity
kg/sec.
2)
Dimensions
trough profile
Vib
rator typ
e 1)
Weig
ht kg
Installation requirements
(mm)
Fixing holes
0º 15º 25º Wid
th (W
)
Heig
ht (H
e)
Har-dox wear lining mm
L Lt H Hv S C A B K
L0º L15º L25º H0º H15º H25º S0º S15º S25º
040/0050
11 17 31 400 160 4 8D 110 510 450 400 862 345 460 530 615 210 250 280 450 500 580 650 8xØ18
056/0071
22 40 71 560 225 4 20D 220 710 625 545 1087 505 655 740 910 335 360 390 610 720 800 875 8xØ22
080/0100
48 102 222 800 315 5 50D 520 990 875 765 1524 705 920 1040 1170 490 550 580 850 980 1100 1200 8Ø22
1) Technical specifications for vibrators and controls (see relevant data sheets). 2) The capacities stated are valid for naturally moist sand 0-3 mm including wear plates in trough profile – by bulk density 1.6 t/m³. Working pressure: 7-10 bar.
Feeder for discharge of dump hopper
Feeder size
Motor vibrator Capacity
FCU056/1700-3C
BX 60-4 82 kg/sec. at 50 Hz
FCU056/1700-3C
BXZ 60-4 82 kg/sec. at 60 Hz
Generally: Including material sensor and self-acting closing gate Coating: Galvanized
Please contact SKAKO CONCRETE for further information regarding exact dimensions and installations. SKAKO CONCRETE reserves the right to change or improve the above data and specifications