vid eo out 4 - sony.com · hq, hsp, sp, lsp, lp, ep, slp, or sep hq offers the best quality...
TRANSCRIPT
![Page 1: VID EO OUT 4 - sony.com · HQ, HSP, SP, LSP, LP, EP, SLP, or SEP HQ offers the best quality picture, but with the shortest recording time. Recording time increases with each successive](https://reader031.vdocument.in/reader031/viewer/2022011808/5c8319ad09d3f295198d052d/html5/thumbnails/1.jpg)
Before hookup
©2005 Sony Corporation
Printed in China2-637-175-11(1)
AK68-00783A
VHF/UHF IN
YY
RF
T
VHF/UHF INLINE IN
ANT IN
OPTICAL S VIDEO
CAV
OUTTV
VIDEO OUT
TelevisionCable Box /
Satellite Receiver
DVD Recorder
to your antenna wall jack
to your antenna wall jack
You have a:Cable Box With Video / Audio Output –or–Satellite Receiver
Connect all power cords last!
You have a:Cable Box Without Video / Audio Output (or cable with no cable box) –or–Antenna (no cable TV)
Connect all power cords last!
You will need:
X2 X2(one audio/video cord is supplied) (one antenna cable is supplied)
You will need:
X1 X3(one audio/video cord is supplied) (one antenna cable is supplied)
to OUT TO TV
to VIDEO OUT/
AUDIO OUT
to LINE INto VHF/UHF IN
to an AC outlet
to VHF/UHF OUT
to RF IN
to RF OUT
to VHF/UHF IN
to an AC outlet
to CABLE IN
to LINE IN
to an AC outlet
to an AC outlet
If you don’t have a cable box, connect
this antenna cable directly to VHF/UHF
IN on the DVD recorder.
Cable Box / Satellite Receiver
DVD Recorder
Cable Box Television
to LINE 1 IN
to LINE OUT
to LINE OUT
to VHF/UHF IN
b
a
Connect one of the following cords (not supplied)audio cords -or-coaxial digital cord -or-optical digital cord
a
b
c
C
Optional Connecting an S video cord or a component video cord
Connect an S video cord (not supplied). You will enjoy high quality images.-or-
Connect the COMPONENT VIDEO OUT jacks using a component video cord (not supplied) or three video cords (not supplied) of the same kind and length. You will enjoy accurate color reproduction and high quality images.If your TV accepts progressive 480p format signals, you must use this connection and then set “Progressive” of “Video” to “On” in the Setup menu. For further explanations, see “Video Settings (Video)” in the Operating instructions.
Connecting an AV amplifi er (receiver)
Connecting to an AV amplifi er (receiver) with digital cords will enable you to listen to Dolby Digital or DTS surround effects. For further explanations, see “Connecting to Your AV Amplifi er (Receiver)” in the Operating Instructions.
DVD Recorder
to COMPONENT VIDEO IN
to COMPONENT VIDEO OUT
Television
a
b
to S VIDEO IN
LI
DIG
AV Amplifi er
DVD Recorder
to DIGITAL IN(COAXIAL)
to LINE IN(AUDIO)
to DIGITAL IN(OPTICAL)
ab
c
to DIGITAL OUT (COAXIAL or OPTICAL)
LINE OUT 2L/R
Follow the three steps below to connect, setup and make recordings on your DVD recorder.
RDR-GX315
Disconnect your VCRIf you have been using a VCR, you do not need to disconnect all of your equipment. Just disconnect your VCR from the other equipment and connect this DVD recorder in its place.
Select a connection Select one of the following two types of basic connections according to the type of equipment you have.
Cable Box With Video/Audio Output – or – Satellite Receiver
Cable Box Without Video/Audio Output (or cable with no cable box)
– or – Antenna (no cable TV)
Proceed to Step 1 and begin!
1
2
to LINE OUT (S VIDEO)
2
1
4
4
3
3
2
4
4
1
VCR
DVD Recorder
Television
![Page 2: VID EO OUT 4 - sony.com · HQ, HSP, SP, LSP, LP, EP, SLP, or SEP HQ offers the best quality picture, but with the shortest recording time. Recording time increases with each successive](https://reader031.vdocument.in/reader031/viewer/2022011808/5c8319ad09d3f295198d052d/html5/thumbnails/2.jpg)
Easy Setup
Searching for receivable Channels. 25Please wait.
SYSTEMMENUReturn Exit
1/4
Title List(Original)
CH 23
May/02/200508:00 PM
10:10 AM
No. Title Length Edit
01 >
02 >
03 >
04 >
CH 23 01:29:03
CH 66 00:31:23
CH 95 01:59:00
CH 97 00:58:56
ENTER SYSTEMMENUMove Enter Return Exit
1/4
Title List (Original)
CH 23
May/02/200508:00 PM
10:10 AM
No. Title Length Edit
01 >
02 >
03 >
04 >
CH 23 01:29:03
CH 66 00:31:23
CH 95 01:59:00
CH 97 00:58:56
ENTER SYSTEMMENUMove Enter Return Exit
Play
Title Erase
Chapter Erase
Protect
Title Name
A-B Erase
Divide Title
Record a TV ProgramThe following explains how to record a current TV program. For instructions on how to set the timer, see “Timer Recording” in the Operating Instructions.
1 Press CH+/– to select a channel.
The channel number appears in the front panel display.
• If you connected your cable box or satellite receiver to the Line 1 input of the DVD recorder, press INPUT SELECT until “LINE1” appears in the front panel display. Then select a channel on your cable box or satellite receiver.
• If you connected your cable box to the DVD recorder’s antenna input jack, select channel 2, 3 or 4, whichever channel is used to receive the signal from the cable box. Then select a channel on your cable box.
Playback the Recorded DVD Disc1 Press TITLE LIST.
The Title List menu appears.
2 Press / to select the title you want to play and press ENTER.
The sub-menu appears.
3 Press / to select “Play” and press ENTER.
Playback starts from the beginning of the title.
Easy Setup is finished.
Finish
Easy Setup 10:10 AM
ENTER SYSTEMMENUMove Enter Return Exit
Insert a DVD Disc1 Press OPEN/CLOSE and
place a recordable DVD on the disc tray.
2 Press OPEN/CLOSE again to close the disc tray.
“LOAD” will appear for about a minute in the DVD recorder’s front panel display. See “Quick Guide to Disc Types” in the Operating Instructions for more details about the differences between disc types.
The Easy Setup display automatically appears on your TV screen when you turn on your recorder for the fi rst time. Follow the steps below to make the minimum number of basic adjustments to use the recorder. If you make a mistake, press RETURN.
Initial setting necessary to operate theDVD recorder will be made.
You can change them later using setup.
Easy Setup
Start
ENTER SYSTEMMENUEnter Return Exit
6 Press / to select “Auto” and press ENTER.
The recorder will automatically search for a channel that carries a time signal when you turn off the recorder after fi nishing Easy Setup.If no broadcaster in your area is sending a time signal, setect “Manual,” and press ENTER. Press / to set the month and press . Set the day, year, hour, minutes, and AM/PM in the same way. The day of the week is set automatically.
7 Press / to select whether or not you have a cable connection, and press ENTER.
If you use an antenna only (no cable TV), select “Antenna.” For all other connections, select “Cable.”
8 The Tuner Preset function starts searching for all receivable channels. This may take a couple of minutes.
9 Press / to select the typeof TV you have, then press ENTER.
If you have a wide-screen TV, select “16:9.” If you have a standard TV, select either “4:3 Letter Box”(shrink to fi t) or “4:3 Pan Scan” (stretch to fi t). This will determine how “wide-screen” images are displayed on your TV.
10 Press / to select the type of Dolby Digital signal you want to send to your AV amplifi er (receiver), then press ENTER.
If your AV amplifi er (receiver) has a Dolby Digital decoder, select “Dolby Digital.” If not, select “D-PCM.”
11 Press / to select the type of DTS signal you want to send to your AV amplifi er (receiver), then press ENTER.
If your AV amplifi er has a DTS decoder, select “On.” If not, select “Off.”
12 When “Finish” appears, pressENTER to complete Easy Setup.
1 Turn on your TV and any other connected equipment such as your cable box or satellite receiver.
2 Press / on the DVD recorder.
3 Switch the input selector on your TV so that the signal from the recorder appears on your TV screen.
If “Initial setting necessary to operate the DVD recorder will be made. You can change them later using setup.” does not appear on your TV screen, press SYSTEM MENU, select “Setup” and then select “Easy Setup.”
4 Press ENTER.
5 Press / to select a language for the on-screen display, then press ENTER.
2 Press REC MODE repeatedly to select the recording mode.
HQ, HSP, SP, LSP, LP, EP, SLP, or SEPHQ offers the best quality picture, but with the shortest recording time. Recording time increases with each successive mode, but the picture quality gradually deteriorates.
hintHow much disc space do I have?You can check disc information such as the remaining space, by pressing DISPLAY while the disc is inserted.
3 Press REC.
The recorder starts recording. To stop recording, press STOP.
Select a method for setting the clock.If you select "Auto", this recorder will look
for a time signal when you turn it off.
Auto
Manual
Easy Setup
ENTER SYSTEMMENUMove Enter Return Exit
Select the way in which you will receivechannels.
Antenna
Cable
Easy Setup
ENTER SYSTEMMENUMove Enter Return Exit
Select your TV screen type.
Easy Setup 10:10 AM
16 : 9
4 : 3 Letter Box
4 : 3 Pan Scan
ENTER SYSTEMMENUMove Enter Return Exit
Dolby Digital
Easy Setup 10:10 AM
D-PCM
Dolby Digital
ENTER SYSTEMMENUMove Enter Return Exit
DTS
Easy Setup 10:10 AM
On
Off
ENTER SYSTEMMENUMove Enter Return Exit
hintDon’t know what’s going on?Look at your TV screen, not the front panel display. Messages explaining the current status of the DVD recorder will appear on your TV screen. Note that the remote does not work while “LOAD” is fl ashing, so be patient!
Select the screen language.
English
Français
Español
Easy Setup
ENTER SYSTEMMENUMove Enter Return Exit
11 22 33
44 55 66
77 88 99
00
RECMODE
OPEN/CLOSE
CH/TRACKING
INPUTSELECT
DISPLAY
TITLELIST
ENTER
REC
ENTER
ENTER
ENTER
RETURN
///ENTERPress ENTER to make a selection
/ (on/standby)
Label side facing up
SYSTEM MENU