Video recorder NEOLINE EVO Z1

User manual

1

2

3

4

5

6

[ Meaning of buttons ]

Button

Power

Menu

UP

Down

RESET

Status of the device Description of the function

Feeding is turned off

Any mode

Main menu

Video mode Press to start / stop the recording

Press to shoot a photoPhoto mode

Playback mode

Video mode

Main menu

Main menu

Photo mode

Standby mode

Menu mode

Playback mode

Photo menu

Video mode

Menu mode

Playback mode

For reset

Press to block the current recording(Urgent recording function)

Press to switch to the Settings menu

Press and hold to switch modes: Video / Photo / Playback

Press to zoom in the image

Press and hold to turn the image 180 degrees on the display

Press to switch to Up

Press to speed up the playback

Press to remove the image

Press and hold to switch the micro-phone on/off

Press to switch to Down

Press to slow down the playback

Press to play back / pause

Press to acknowledge your choice

Press and hold to switch the device off

Press to switch the device on

7

8

9

10

11

12

13

Playback

In Playback mode press Menu button, then select any menu item for setting.

Settings

In order to enter the menu of general settings, press Menu button twice in any mode, then select any menu item for setting.

Playback

Settings

Description

Description

Submenu

Submenu

Removal of video or image

Setting of date and time

Selection of language

Protection of video or image from removal

Switching on the sound of button upon pressing

Selection of interval for automated file switch

Selection of network frequency

Entering of the Сar plate number stamp

SD card

No/Yes

Selection of an interval after which the display lighting will be switched off

Remove one / Remove all

YY/ MM/ DD XX:XX:XX

English/Russian

Block this file / Unblock this file / Block all / Unblock all

On/Off

Remove

Date/Time

Language

Block

Button sound

Slide show

Network frequency

Сar plate number stamp

Formatting

Manufacturer‘s settings

Software version

Memory card formatting

Reset of settings

Firmware version XXXX-XXXXXX-XXXXXXXXXX

Screen auto switch off

2 sec./5 sec./8 sec.

50Hz/60Hz

---------

Off/1 min./ 3 min. / 5 min.

14

[ Possible problems and their causes ]

If any problems with the video recorder emerge although the equipment maintenance and operation terms have been observed, read this section to solve them.

- It is impossible to shoot photos and record videos.

Check if there is enough free space on Micro SD card, and if it is not blocked.

- Spontaneous stop occurs during the recording.

Since HD quality video files occupy much space, use only high quality Micro SD cards no lower than 6 class (class 10 is recommended).

- When you try to view / back play a photo-video file, “wrong file” inscription appears on the display.

This is caused by incomplete file recording due to the file system failure on the Micro DS card. Format the Micro SD card.

- Blurred image.

Check for dirt or fingerprints on the lens. If you find any, wipe the lens with a piece of soft cloth before usage. (To avoid damage to the lens surface special substances for the maintenance of optical equipment are recommended).

- Image is darkened when you shoot the sky or water.

If a sharp contrast is present on the shooting scene, it will affect the exposure. Change the exposure value settings in menu.

- Unnatural colour on the recording and photo occurs when you shoot on a cloudy day or indoors.

Check White balance settings in menu, set White balance in Auto mode or select the value which suits the shooting conditions.

15

- Horizontal stripes are visible on the image.

They are caused by wrong settings of the electric network frequency. Set the frequency value corresponding to the parameters of your local electric network.

- Hang (no image on the display, no reaction to pressing on buttons).

Press RESET button to start a forced reset of the device.

Manufacturer:Shenzhen Nello Electronics Technology Co, Ltd.6/F, Building A, HuaYuan Industrial Park, 1st Industrial Area, Feng Huang, FuYong Town, Bao’an District, Shenzhen, ChinaMade in China

Official site: www.neoline.ruTechnical support: support@neoline.ru

Service life: 36 months

DC 5V, 1AOperating temperature: from -10 degrees to +40 degrees