vincentius andrew soesanto february 2 2015 cbe 555
TRANSCRIPT
![Page 1: Vincentius Andrew Soesanto February 2 2015 CBE 555](https://reader036.vdocument.in/reader036/viewer/2022062715/56649d975503460f94a81658/html5/thumbnails/1.jpg)
Vincentius Andrew SoesantoFebruary 2 2015
CBE 555
Manufacturing (degradable) polymers
![Page 2: Vincentius Andrew Soesanto February 2 2015 CBE 555](https://reader036.vdocument.in/reader036/viewer/2022062715/56649d975503460f94a81658/html5/thumbnails/2.jpg)
• First emerged in Europe due to landfill capacity and poor public image of plastics
• In 2012, demand fraction was 55% for Europe, 29% for North America and 16% for Asia
• Total demand was speculated to rise from 269,000 metric tons in 2012 to 525,000 metric tons in 2017
• Primary uses include food packaging and food–service products
I. Biodegradable polymer market
‡(no author) – (Plastics News Report), 2013, Report: Biodegradable plastics demand growing 15% annually‡(no author) – 2006, Global biodegradable polymer market by application
![Page 3: Vincentius Andrew Soesanto February 2 2015 CBE 555](https://reader036.vdocument.in/reader036/viewer/2022062715/56649d975503460f94a81658/html5/thumbnails/3.jpg)
• Primary components include PLA (47%) and starch–based polymers (41%)
• Nature Works: natural plant sugars PLA• Metabolix: switchgrass biodegradable polymers (using enzymes)• Compostability requirements:
1. Biodegradation
2. Disintegration
3. Non–toxicity• ISO 17088 requires at least 60% of biodegradation within 180 days
I. Biodegradable polymer market
‡(no author) – (Plastics News Report), 2013, Report: Biodegradable plastics demand growing 15% annually‡Talbot (2013), Plastic from Grass: Engineers seek a cheaper biodegradable polymer
![Page 4: Vincentius Andrew Soesanto February 2 2015 CBE 555](https://reader036.vdocument.in/reader036/viewer/2022062715/56649d975503460f94a81658/html5/thumbnails/4.jpg)
I. Biodegradable polymer market
‡Hermans & Banholzer, January 22 2015, Lecture Notes
![Page 5: Vincentius Andrew Soesanto February 2 2015 CBE 555](https://reader036.vdocument.in/reader036/viewer/2022062715/56649d975503460f94a81658/html5/thumbnails/5.jpg)
II. Manufacturing degradable polymers
![Page 6: Vincentius Andrew Soesanto February 2 2015 CBE 555](https://reader036.vdocument.in/reader036/viewer/2022062715/56649d975503460f94a81658/html5/thumbnails/6.jpg)
II. Manufacturing degradable polymers
Anionic polymerization:
Initiators: strong bases like metal hydroxides / alkoxidesSolvents: must contain no protic impurities (e.g. , , etc)
‡Young & (2011), Introduction to Polymers, pp. 179 – 180
![Page 7: Vincentius Andrew Soesanto February 2 2015 CBE 555](https://reader036.vdocument.in/reader036/viewer/2022062715/56649d975503460f94a81658/html5/thumbnails/7.jpg)
II. Manufacturing degradable polymers
Cationic polymerization:
Initiators: strong acids such as Solvents: non–polar (e.g. hexane) or very polar (e.g. methylene chloride) solvents
‡Young & (2011), Introduction to Polymers, pp. 174 – 175
![Page 8: Vincentius Andrew Soesanto February 2 2015 CBE 555](https://reader036.vdocument.in/reader036/viewer/2022062715/56649d975503460f94a81658/html5/thumbnails/8.jpg)
II. Manufacturing degradable polymers
• Anionic more rigorous• Both are carried out:
– Low temperatures– Stainless steel units
Cationic v.s. anionic polymerization:
![Page 9: Vincentius Andrew Soesanto February 2 2015 CBE 555](https://reader036.vdocument.in/reader036/viewer/2022062715/56649d975503460f94a81658/html5/thumbnails/9.jpg)
II. Manufacturing degradable polymers
Condensation polymerization:
• Small molecule by–products continuously removed using heating, drying agents, azeotropic distillation, imposing a partial vacuum or purging with an inert gas
• Interfacial polymerization used when possible
‡Young & (2011), Introduction to Polymers, pp. 23
![Page 10: Vincentius Andrew Soesanto February 2 2015 CBE 555](https://reader036.vdocument.in/reader036/viewer/2022062715/56649d975503460f94a81658/html5/thumbnails/10.jpg)
II. Manufacturing degradable polymers
Step–growth Controlled chain–growth
FundamentalThermodynamically controlled
Kinetically controlled
Number–average molecular weight,
Polydispersity index, (ranges btw. 1 and 2)
Step v.s. chain polymerization:
• is initial monomer concentration• is initial initiator concentration• is percent conversion of monomer
![Page 11: Vincentius Andrew Soesanto February 2 2015 CBE 555](https://reader036.vdocument.in/reader036/viewer/2022062715/56649d975503460f94a81658/html5/thumbnails/11.jpg)
II. Manufacturing degradable polymers
Polymer (transport) properties:
• Non–Newtonian fluids (i.e. )
• Numerous mechanical (anisotropic) properties (e.g. stresses, elongational viscosity, tensile strength etc)
‡Bird, Stewart & Lightfoot (2008), Transport Phenomena, pp. 231 – 257
![Page 12: Vincentius Andrew Soesanto February 2 2015 CBE 555](https://reader036.vdocument.in/reader036/viewer/2022062715/56649d975503460f94a81658/html5/thumbnails/12.jpg)
II. Manufacturing degradable polymersPolymer (transport) properties:
State Compound Thermal conductivity at ()
GasAirCarbon dioxide
LiquidAcetone 0.16MethanolWater
Solid
IronZincSodiumHDPELDPEPMMAPolypropylene
‡Engineering Toolbox
![Page 13: Vincentius Andrew Soesanto February 2 2015 CBE 555](https://reader036.vdocument.in/reader036/viewer/2022062715/56649d975503460f94a81658/html5/thumbnails/13.jpg)
II. Manufacturing degradable polymers
Polymer (transport) properties:
High viscosity laminar flow poor mixing
Low thermal conductivity slow heat conduction
High viscosity + low thermal conductivity radial temperature gradient & trapped heat (viscous heating)
Rec.:
‡Bird, Stewart & Lightfoot (2008), Transport Phenomena, pp. 298 – 300
![Page 14: Vincentius Andrew Soesanto February 2 2015 CBE 555](https://reader036.vdocument.in/reader036/viewer/2022062715/56649d975503460f94a81658/html5/thumbnails/14.jpg)
II. Manufacturing degradable polymers
Heat of polymerization:
MonomerTetrafluoroethyleneVinyl chlorideEthyleneVinyl acetateMethyl acrylateStyreneMethyl methacrylate
‡Middleman (1977), Fundamentals of Polymer Processing, p. 369
![Page 15: Vincentius Andrew Soesanto February 2 2015 CBE 555](https://reader036.vdocument.in/reader036/viewer/2022062715/56649d975503460f94a81658/html5/thumbnails/15.jpg)
II. Manufacturing degradable polymersIn the industry:
• Reactor: tubular reactors with temperature control bath• Separator(s):• Extrusion or fiber spinning to extract solid• Filtration, evaporation or vacuum distillation to remove
remaining solvent• How to handle viscous heating:• Cooling jackets• Smaller diameter tubes• Suspension / emulsion polymerization
• How to prevent runaway reaction(s):• Temperature adjusted using heat exchange area• Conversion adjusted using initiator or inhibitor concentration
‡Middleman (1977), Fundamentals of Polymer Processing, pp. 385 – 386‡Rawlings & Maravelias (1994), Process Dynamics & Control: Laboratory Manual, pp. 135 – 137
![Page 16: Vincentius Andrew Soesanto February 2 2015 CBE 555](https://reader036.vdocument.in/reader036/viewer/2022062715/56649d975503460f94a81658/html5/thumbnails/16.jpg)
Unit Operation Function
Dissolution Dissolving solid polymer (chips) in a solvent
ExtrusionPumping the polymer to produce a set of conditions (e.g. film thickness, temperature, linear speed, surface gloss etc)
CalenderingSqueezing of films between rolls for the purpose of thinning the film or imparting surface characteristics
Coating Coating another liquid on one side or both of a film
Drying Evaporating the solvent contained in the coating material
II. Manufacturing degradable polymers
Mechanical processing units:
‡Middleman (1977), Fundamentals of Polymer Processing, pp. 2 – 3
![Page 17: Vincentius Andrew Soesanto February 2 2015 CBE 555](https://reader036.vdocument.in/reader036/viewer/2022062715/56649d975503460f94a81658/html5/thumbnails/17.jpg)
II. Manufacturing degradable polymers
Mechanical processing units (mixer):
‡Middleman (1977), Fundamentals of Polymer Processing, pp. 345
![Page 18: Vincentius Andrew Soesanto February 2 2015 CBE 555](https://reader036.vdocument.in/reader036/viewer/2022062715/56649d975503460f94a81658/html5/thumbnails/18.jpg)
II. Manufacturing degradable polymers
• Made by mixing synthetic polymers (e.g. poly(lactide)) with starch or cellulose
• PLA made by Carothers (1932) and developed by DuPont:• Cargill Dow – solventless method with novel distillation• Mitsui and Toatsu – condensation with azeotropic distillation
Manufacturing biodegradable polymers:
Polymer Company Capacity (tons / year)
Poly(lactic acid) Cargill Dow LLC 140,000
Poly(ε-caprolacton) Union Carbide >5,000
Poly(ethylene terephthalate, adipate)
BASF 8,000
Master–Bi starch Novamont 20,000
‡Gross & Kalra (2002), Biodegradable Polymers for the Environment
![Page 19: Vincentius Andrew Soesanto February 2 2015 CBE 555](https://reader036.vdocument.in/reader036/viewer/2022062715/56649d975503460f94a81658/html5/thumbnails/19.jpg)
III. Degradation
• Biodegradable polymer packaging and their contents are degraded together to CO2, CH4, water, biomass and other natural substances
• Enzymatic degradation by microorganisms• Non-enzymatic degradation (e.g. hydrolysis)
‡Merechal, F. (2003), Biodegradable plastics: View of APME‡Gross & Kalra (2002), Biodegradable Polymers for the Environment
![Page 20: Vincentius Andrew Soesanto February 2 2015 CBE 555](https://reader036.vdocument.in/reader036/viewer/2022062715/56649d975503460f94a81658/html5/thumbnails/20.jpg)
III. DegradationNon–enzymatic pathway:
‡Mahanthappa (2014), Lecture Notes
![Page 21: Vincentius Andrew Soesanto February 2 2015 CBE 555](https://reader036.vdocument.in/reader036/viewer/2022062715/56649d975503460f94a81658/html5/thumbnails/21.jpg)
III. Degradation
Enzymatic pathway:
‡Tokiwa, Calabia, Ugwu, & Aiba (2009), Biodegradability of Plastics
• Enzymatic binding followed by a hydrolytic cleavage• Polymers oligomers dimers monomers low boilers• PLA degraded using Amycolatopsis or Saccharotrix strains
(Williams proteinase K)
![Page 22: Vincentius Andrew Soesanto February 2 2015 CBE 555](https://reader036.vdocument.in/reader036/viewer/2022062715/56649d975503460f94a81658/html5/thumbnails/22.jpg)
IV. Conclusion
![Page 23: Vincentius Andrew Soesanto February 2 2015 CBE 555](https://reader036.vdocument.in/reader036/viewer/2022062715/56649d975503460f94a81658/html5/thumbnails/23.jpg)
References1. (no author) – (Plastics News Report), 2013, Report: Biodegradable plastics demand
growing 15 percent annually (27 January 2015, http://www.plasticsnews.com/article/20130422/NEWS/130429995/report-biodegradable-plastics-demand-growing-15-percent-annually)
2. (no author) – 2006, Global biodegradable polymer market by application, 2000-10, (27 January 2015)
3. Talbot, D. (2013), Plastic from Grass: Engineers seek a cheaper biodegradable polymer, MIT Technology Review Magazine
4. (no author) (2013), Biodegradable plastics demand to grow 15% annually to 2015 (27 January 2015, http://www.plastemart.com/Plastic-Technical-Article.asp?LiteratureID=1958&Paper=biodegradable-plastics-demand-to-grow-15-percent-annually-to-2015)
5. Patel, M. (2003), Do Biopolymers Fulfill Our Expectations Concerning Environmental Benefits, Kluwer Academic / Plenum Publishers, New York
6. Source: Mohan, A. M. (2010), Biodegradable polymers market to grow at 13% through 2014, GreenerPackage.com (27 January 2015, http://www.greenerpackage.com/bioplastics/biodegradable_polymers_market_grow_13_through_2014)
7. Hermans, I. & Banholzer B., January 22 2015, Lecture Notes, University of Wisconsin–Madison
![Page 24: Vincentius Andrew Soesanto February 2 2015 CBE 555](https://reader036.vdocument.in/reader036/viewer/2022062715/56649d975503460f94a81658/html5/thumbnails/24.jpg)
References (continued)
8. Young, R. J. & Lovell, P. A. (2011), Introduction to Polymers, 3rd edition, CRC Press, Taylor & Francis Group, Boca Raton
9. Bird, R. B., Stewart, W. E & Lightfoot, E. N. (2008), Transport Phenomena, 2nd edition, John Wiley & Sons, New York
10. Engineering Toolbox
11. Middleman, S. (1977), Fundamentals of Polymer Processing, McGraw–Hill, Inc.
12. Rawlings, J. B. & Maravelias, C. T. (1994), Process Dynamics & Control: Laboratory Manual CBE 470, 3rd edition, pp. 135 – 137
13. Merechal, F. (2003), Biodegradable plastics: View of APME, Kluwer Academic / Plenum Publishers, New York
14. Gross, R. A. & Kalra, B. (2002), Biodegradable Polymers for the Environment, SCIENCE, VOL 297, www.sciencemag.org
15. Mahanthappa, M. K., September 2 2014, Lecture Notes, University of Wisconsin–Madison
16. Tokiwa, Y., Calabia, B. P., Ugwu, C. U. & Aiba S. (2009), Biodegradability of Plastics, Int J Mol Sci., 10(9), 3722 – 3742, doi: 10.3390/ijms10093722
17. Swift, G. (2003), Significance and implications of Green Polymer Chemistry, Kluwer Academic / Plenum Publishers, New York