visual act winch p2014 rev2015:1
DESCRIPTION
Visual act Product DatasheetTRANSCRIPT
Visual act Scandinavia AB. Copyright 2015.
Winch P2014
Revision 2015:1
Technical Data SheetThe Winch P2014 is a flexible zero fleet point hoist for 250 or 125 kg loads. Matched with an
appropriate amplifier cabinet it can be used at speeds of up to 5 m/s. The winch can easily be converted
to a two point winch or to roll-on roll-off. Load cells are fitted so that the load on each line is individually
monitored.
Standard features • Load up to 250 kg
• Zero fleet
• Any mounting position
• Grooved for 6 mm rope (ropes)
• Double limit switches with simple linear adjustment
• Dual brakes on output shaft
• Brake monitors
• Stroke 60 m (single line)
• Synchronous motor
• Dual encoders
• Load cell per line
Model number
P2014 - x - 250 - 2.5 - 60 - 6 - xx
Model - Revision - Load - Speed - Stroke(single line)
- Line size - Options
Standard variations
Winch Load Stroke Speed Acceleration* AmplifierP2014-a-250-2.5-60-6-xx 250 kg 60 m 2.5 m/s 2 m/s2 Drive 10
P2014-a-125-5-60-6-xx 125 kg 60 m 5 m/s 4 m/s2 Drive 10
P2014-a-250-5-60-6-xx 250 kg 60 m 5 m/s 2 m/s2 Drive 16-25
*At full load. Higher accelerations possible with larger amplifier cabinets. OptionsP2014-a-xxx-xx-60-6-L2 Second line for two line winch (stroke will be reduced)
P2014-a-xxx-xx-60-6-RR Second line for roll-on roll-off (stroke will be reduced)
Contact information, rentals & salesVärmdövägen 703, SE-132 35 Saltsjö-Boo, Sweden
Ph: +46 (0)8 522 472 00 / Mail: [email protected]
w w w . v i s u a l a c t . s e
Dimension drawing
45
65
180
733 358
1170