wall mount handrail options - cooper industries mount handrail options ramps ramp handrail wall...
TRANSCRIPT
Wall Mount Handrail Options
Ramps Ramp handrail wall returns may be specified with a 12" extension. io requires field verified “horizontal” and “diagonal” ramp dimensions in order to generate shop drawings. Additional field dimensions may be required depending on the complexity of the handrail design.
401 E. MichiganDesigner: Gary Steffy Lighting DesignPhotographer: Nelson Nave
Mississippi River Overlook Designer: HOK Photographer: Dave Pickett
12"(0.3m)
6"(0.15m)
3.25" (83mm)
Wall Return
Ext. Wall Return
3.25" (83mm)
12"(0.3m)
6"(0.15m)
3.25" (83mm)
Wall Return
Ext. Wall Return
3.25" (83mm)
Horizontal
Elevation Change
6" (0.15m)
10" (0.15m)
Diagonal
slope
Horizontal
Elevation Change
Diagonal
slope
staiRs Stair handrail wall returns may be specified with a 12" extension. io requires field verified “horizontal” and “diagonal” stair dimensions in order to generate shop drawings. Additional field dimensions may be required depending on the complexity of the handrail design.
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com
Posts are chosen to match or complement your handrail selection. Posts are spaced between 4' and 5' on-center depending on specified size and alloy. Posts may be surface mounted or embedded below concrete surface and set with quick-setting grout by contractor. Base plates are optional.
Post Mount Options
Surface Mounted Embedded
Cover Flange
41⁄2"(114mm)
13⁄1
6"(2
1mm
)
1" (2
5mm
)
Clear Hole for 3⁄8" bolts(9.6mm)
31⁄4" diameterBolt Circle(82.5mm)
Flange Base
Concrete
Rocktite
slip Flange with or without set screw
1⁄2" or 3⁄4" Conduit
(13mm or 19mm)
Return to Walking Surface
Return to Post
ADA Compliant Return Options
345 Park AvenueDesigner: Jaros Baum & BollesPhotographer: Dave Pickett
Lake Forest High School Designer: Perkins & Will Photographer: Dave Pickett
Eden Roc Hotel Photographer: Dave Pickett
12" min(0.3m)
12" min(0.3m)
1 tread width
12" min(0.3m)
12" min(0.3m)
1 tread width
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com
Length Options
Application Options
Standard grab bar lengths may be ordered available in nominal lengths of 2', 3', 4', and 5'.
grab bar may be customized to accommodate ADA lighting or aesthetic requirements. Submit concept sketches to io Lighting for design assistance.
standard grab bar
Custom grab bar
Custom grab bar
Railings shown are not to scale.
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com
505.7.1 CiRCulaR CRoss sECtion
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 11⁄4" (32mm) minimum and 2" (51mm) maximum.
The following references are taken from the 2004 Americans with Disabilities Act Accessibility Guidelines.
Capital One Designer: Oglesby Holtman DesignPhotographer: Dan Kohnen
Handrail Dimensions
Custom luxrail grab bar lengths can be specified to accommodate all ADA Compliant applications
Shower StallsBath TubsWater Closets
12"
36" min
36" min
12"
12"
54" min
54" min
17"-19"19" min 33"-36"
48" min12" max
33"-36" 33"-36"
15" max
9"
Back Wall
side Wall
With seat at Head of tub
Back
24" min12" max
33"-36"
15" max
9"33"-36"
24" min
27" max
Control area
38" min48" max
33"-36"
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com
Transition Sleeve
luxrail integrates a low voltage LED-based linear light fixture within the handrail. luxrail requires a power supply to transform and regulate the voltage. This power supply is called a “driver.”
The luxrail requires that the 24v driver be remotely located. The driver must be housed in an enclosure that is rated for use in both interior and exterior applications. luxrail utilizes a compact electronic driver which is protected against open circuit, short circuit, overload and overheating conditions. It is UL recognized and FCC compliant.
Electrical
When a handrail is installed on ramps, stairs or landings 30" above finished floor – it is referred to as a “guardrail.” Handrails provide guidance, while guardrails prevent accidental falls. Guardrails have opening limitations. The most common requirement is that no opening be large enough to allow a4" sphere to pass. luxrail has two infill options to address this requirement: stainless steel cable and glass. Stainless steel cable and all required hardware are supplied with system. For glass infill option, panel clips are supplied with system; glass is supplied by others.
Glass inFill
Panel clips are used to support 1⁄4" or 1⁄2" tempered glass infill panels. Glass is provided by others.
stainlEss stEEl CaBlE inFill
Stainless steel cable railing system integrates all cable hardware inside the end posts, making it virtually invisible. The cable railing system may only be usedwith the stainless steel railing frame. Stainless steel railing hardware can be factory swaged or field swaged by the installer. Cable infill is only available for flat surfaces.
Infill Options
io Studio Photographer: Dave Pickett
Light Backing Pad
Feed Termination
Slotted Tube Insert
Secondary Feed Routed through
Wall Bracket
Light Mounting Clip
Wall Mount Bracket
io Luxrail LED Fixture
22 AWG, 300 Volt Power Cord
Wire Nut Connections within Wireway
Driver with Enclosure
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com
Rubber O-ring
Glass Supported PinInstall through predrilled hole in the glass (optional)
2 1/8"(54mm)
2 1/4"(57mm)
Code Details
aCCEssiBility GuiDElinEs
Two references:1) ICC/AnSI A117.1: Accessible And Usable Buildings & Facilities2) The Americans with Disabilities Act Accessibility Guidelines (ADAAG) Note: ADA is a civil rights law – it is not a building code. However, the ADAAG has been incorporated into many state and local building codes.
illuminanCE lEvEl REquiREmEntsIBC: 1 footcandle for means of egress for emergency lighting. IRC: Light level not specified.AnSI A117: Stairways shall have 10 footcandles measured at the
center of the tread surface and on landing surfaces within 24" of step nosing.
Accessibility Code References
ICC: International Code Council
BOCA: Building Officials Code Administration
ICBO: International Conference of Building Officials
SBCCI: Southern Building Code Congress
IBC: International Building Code
IRC: International Residential Code
Prior to 2000, BOCA, SBCCI and ICBO each prepared their own model codes that were regionally applied. In 1999, these three organizations merged to form the International Code Council (ICC).
In 2000, the ICC published the International Building Code (IBC) and the International Residential Code (IRC). The IRC and the IBC model codes have since been adopted by states throughout the U.S.
AnSI Compliant Illumination Levels
Rio Hondo Pedestrian Bridge Designer: Steven Ehrlich ArchitectsPhotographer: Manuel Jaramillo
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com
Sustainability io Recommends Aluminum
Handrails and GuardrailsHanDRails pRoviDE GuiDanCE
Handrails are located between 34" and 38" above stair nosings or ramp surfaces and have dimensional limitations for graspability. In areas where children are the principal users (e.g., elementary schools), the ADAAG recommends a second set of handrails be located at 28" above stair nosings or ramp surfaces.
Reference: IBC 2000, ANSI A117.1, ADAAG
GuaRDRails pREvEnt aCCiDEntal Falls
Guardrails are generally required for ramps, stairs or landings above 30". The height will vary depending on local code. The IBC requires a guardrail to be 42" in height. If a 42" guardrail is called for on a stair or ramp, it will require a handrail at a height of between 34" and 38". The IRC requires 36" high guardrails for porches, balconies and raised floor surfaces. A guard’s top rail does not have to meet the requirements for graspability if a handrail is in place.
Capital One Designer: Oglesby Holtman DesignPhotographer: Dan Kohnen
GREEn
Aluminum is one of the most sustainable materials on earth. Making up 8% of the Earth’s crust, Aluminum is one of the most plentiful elements and most preferred building material because it can be indefinitely recycled without loss of properties or quality.
DuRaBlE
Aluminum generates a protective oxide coating which makes it naturally corrosion resistant, weather proof and immune to harmful effects of UV rays. Requiring little to no maintenance, Aluminum does not absorb moisture and is saltwater resistant. It will not rust, rot, swell, warp, twist, split or crack.
RoBust
Aluminum is about one-third the weight of steel yet its tensile strength is perfect for handrails, curtain walls, window frames, wall framing systems and solar shading.
lEED
Although recycled material percentages constantly change, approximately 25% of io’s aluminum handrail comes from recycled pre-consumer aluminum.
FinisH
Aluminum can be anodized or painted in any color. Some surface finishes can offer increased durability and corrosion resistance. Consult io Lighting for details.
Clear Anodized Aluminum Caprail
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com
luxrail crosses into two separate sections of the architectural specification – both as handrail which is listed in the “Miscellaneous Metals” section and as lighting which is listed in the “Electrical” section. As such, it requires two different trades for installation: an experienced handrail installer and a licensed electrician. It is important that contractors understand that luxrail must be bid on and installed by two separate trades to ensure accurate labor estimates. On some projects, architects have created an entirely new and separate section of the specification package for luxrail, spelling out exactly how the bidding and installation need to be handled.
When requesting a quote for luxrail, fully dimensioned plan and elevation drawings of each individual railing section are required. Stair and ramp elevations can be found in the Architectural details. Exterior railing locations and elevations are usually shown in the Landscape plans and details. The elevations illustrate the required style, size and features of each railing. The plan views show the location, length and quantity of rails needed. The lighting fixture schedule should also be provided as it lists the desired light output, color and distribution. From these project specific details a customized quotation is created.
After an order is placed, detailed submittal drawings are prepared and sent to the customer for approval. The submittals must be reviewed for compliance with site conditions, conformance with lighting specification and fulfillment of the electrical power requirements. This may require review by several parties.
The lead-time on luxrail fixtures begins once the signed approval drawings have been returned. Once approved, luxrail is custom fabricated to the exact project details and specifications as illustrated in the approvals.
Submittals should be reviewed with three objectives in mind:1. The handrail drawings must be reviewed for compliance to site conditions. Finished stair and ramp dimensions usually vary from the architectural plans. For this reason, actual field dimensions must be used when reviewing the submittals. This portion of the review is typically done by the handrail installer. Contact io Lighting for approved luxrail installers.
2. The LED fixture counts and run lengths must be reviewed to verify that adequate power is provided to each railing and that all remote driver restrictions have been met. This portion of the review is typically done by the electrical contractor.
3. The luxrail catalog code must be reviewed for compliance to the lighting specifications. The light output, beam spread and distribution should be verified. This portion of the review is typically done by the lighting designer.
io has a dedicated team for luxrail projects. Let us help you from design through installation.
The Specification Process
ElEvation DRaWinGs suBmittal DRaWinGs ComplEtED luxRail pRojECt
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com
Power suPPlies
Key Features Recommended for long
continuous runs Suitable for dry, damp and
wet locations Built in wiring compartments
for easy installation Built in EMI Filter for low noise Class 2 w/dual 24v output
specificationsLocation: wet iP65Output Voltage: 24v DCOutput Power: 200w (96 w/channel)Input Voltage: 90 to 264 VAC Frequency: 47 to 63 HZAmbient Temp: -20˚C to +50˚CWeight: 6.61 lbsDimming: Not Available
200-Watt Driverio PArT#: Dr2ØØAM
200W Max Run Length in Series Max Run Lengths in Parallel
line .75 - SO 50' (15.24m) 111' (33.83m)line .75 - MO 23' (7.01m) 50' (15.24m)line .75 - HO and color 15’ (4.57m) 34' (10.36m)line .75 - VHO 11' (3.35m) 25' (7.62m)line 1.5 - SO 15' (4.57m) 111' (33.83m)line 1.5 - MO 7.5' (2.29m) 50' (15.24m)line 1.5 - HO 6' (1.83m) 34' (10.36m)line 1.5 - VHO 4' (1.22m) 21' (6.40m)LEDge - SO 23' (7.01m) 50' (15.24m)LEDge - HO 15' (4.57m) 34' (10.36m)luxrail - SO 50' (15.24m) 111' (33.83m)luxrail - HO and color 15' (4.57m) 34' (10.36m)line 2.0 - SO 20' (6.10m) 46' (14.02m)line 2.0 - HO 14' (4.27m) 31' (9.45m)line 2.0 - VHO 10' (3.05m) 22' (6.71m)line 2.0 - V2HO 6' (1.83m) 15' (4.57m)
2 7 7 N O T A V A I L A B L E
Input Cable Output Cable
Input CableOutput Cable
Inpu
t Cab
leOu
tput
Cab
le
5.85"(148.6mm)
3.05"(77.5mm)
1.57"(39.9mm)
15.59"(396mm)
3.94"(100mm)
Single Line Voltage Input Dual Output Channels
Note: For higher IP enclosure alternatives contact io Lighting for availability.
REMOTE DISTANCE DIAMETER
7'-0" (2.1m) w/22 AWG (.644mm)18'-0" (5.5m) w/18 AWG (1.02mm)46'-0" (14.0m) w/14 AWG (1.63mm)71'-0" (21.6m) w/12 AWG (2.05 mm)
Key Features Light weight, low profile Short circuit and overload
protection Low power supply losses
specificationsLocation: DryOutput Voltage: 24v DCOutput Power: 20wInput Voltage: 120 to 240 VAC Frequency: 50 to 60 HZAmbient Temp: -20˚C to +50˚CWeight: .21 lbsDimming: Yes w/ 250ioXFDiM
20-Watt Driverio PArT#: Dr2Øos
20W Max Run Length in Series Max Run Lengths in Parallel
line .75 - SO 11' (3.35m) 11' (3.35m)line .75 - MO 5' (1.52m) 5' (1.52m)line .75 - HO and color 3’ (.91m) 3' (.91m)line .75 - VHO 2' (.61m) 2' (.61m)line 1.5 - SO 11' (3.35m) 11' (3.35m)line 1.5 - MO 5' (1.52m) 5' (1.52m)line 1.5 - HO 3' (.91m) 3' (.91m)line 1.5 - VHO 2' (.61m) 2' (.61m)LEDge - SO 5' (1.52m) 5' (1.52m)LEDge - HO 3' (.91m) 3' (.91m)luxrail - SO 11' (3.35m) 11' (3.35m)luxrail - HO and color 3' (.91m) 3' (.91m)line 2.0 - SO 4' (1.22m) 4' (1.22m)line 2.0 - HO 3' (.91m) 3' (.91m)line 2.0 - VHO 2' (.61m) 2' (.61m)line 2.0 - V2HO 1' (.30m) 1' (.30m)
2.20"(56.0mm)
2.20"(56.0mm)
24VDC+ –
2.36"(60.0mm)
1.20"(30.5mm)
2.36"(60.0mm)
Line
Load side: use 14 AWG wire
Line side: use 12 AWG wire
Load
4 LampN L
2.36"(60.0mm)
2.20"(56.0mm)
1.2"(30.5mm)
2.36"(60.0mm)
2.20"(56.0mm)
Line
Load
24VDC+ _
Line side: use 12 AWG wire
Load side: use 14 AWG wire
Note: 6" (L) x 4" (W) x 4" (H) enclosure is requied by UL.
REMOTE DISTANCE DIAMETER
7'-0" (2.1m) w/22 AWG (.644mm)18'-0" (5.5m) w/18 AWG (1.02mm)46'-0" (14.0m) w/14 AWG (1.63mm)71'-0" (21.6m) w/12 AWG (2.05 mm) 2 7 7 N O T A V A I L A B L E
Note: 11" (L) x 4" (W) x 4" (H) enclosure is requied by UL.
Key Features UL Class 2 Ultra small, compact size Tightly regulated output:
1% line, 5% load Power factor: 90% min Total harmonic distortion:
20% max Current crest factor: 1.5 max
specificationsLocation: Damp iP66Output Voltage: 24v DCOutput Power: 100wInput Voltage: 120 to 277 VAC Ambient Temp: -40˚C to +50˚CWeight: 1.41 lbsDimming: requires 250ioXFDiM (shown above)
100-Watt Driverio PArT#: 250ioADV100
100W Max Run Length in Series Max Run Lengths in Parallel
line .75 - SO 50' (15.24m) 55' (16.76m)line .75 - MO 23' (7.01m) 25' (7.62m)line .75 - HO and color 15’ (4.57m) 17' (5.18m)line .75 - VHO 11' (3.35m) 12' (3.66m)line 1.5 - SO 15' (4.57m) 55' (16.76m)line 1.5 - MO 7.5' (2.29m) 25' (7.62m)line 1.5 - HO 6' (1.83m) 17' (5.18m)line 1.5 - VHO 4' (1.22m) 10' (3.05m)LEDge - SO 23' (7.01m) 25' (7.62m)LEDge - HO 15' (4.57m) 17' (5.18m)luxrail - SO 50' (15.24m) 55' (16.76m)luxrail - HO and color 15' (4.57m) 17' (5.18m)line 2.0 - SO 20' (6.10m) 21' (6.40m)line 2.0 - HO 14' (4.27m) 15' (4.57m)line 2.0 - VHO 10' (3.05m) 10' (3.05m)line 2.0 - V2HO 6' (1.83m) 7' (2.13m)
REMOTE DISTANCE DIAMETER
7'-0" (2.1m) w/22 AWG (.644mm)18'-0" (5.5m) w/18 AWG (1.02mm)46'-0" (14.0m) w/14 AWG (1.63mm)71'-0" (21.6m) w/12 AWG (2.05 mm)
Dimming Module io PArT#: 250ioXFDiM
io Lighting 370 Corporate Woods Pkwy Vernon Hills, IL 60061-3107 T 847.735.7000 F 847.735.7001 E [email protected] W iolighting.com
Dimming Module Key Features• Utilizes pulse width
modulation, (PWM) tocontrol LED performance
• Options available for analogor DMX control protocols
• Dimming range: 0-100%• Short circuit, overload and
overheating protection
SpecificationsLocation: DryInput Voltage: 24v DCMax. Input Current: 5.3AControl Voltage: 0-10V DCOutput Frequency: 135 HZAmbient Temp: -20C to +50CWeight: .165 lbsPower Consumption Up to 3W
.13"3.5mm3.5mm
1.65"42mm42mm
.78"20mm
6.46 ± .02"164 ± 0.3 mm164 ± 0.3 mm
6.77 ± .02"6.77 ± .02"172 ± 0.3 mm
serutxiFDEL
gnimmiDeludoM
Input Line Voltageoltage
Control signal 1...10VDC
revirDDEL
Exterior Rated Enclosure
Two dimming modules can be located in each 11"x4"x4" enclosure
Specify wire gage, and number of dimming modules.
DMX CompatibilityA DMX to 0-10V converter will typically be required to interface with DMX control systems. ETC has tested the dimming module with the Unison Series Dimming Rack. The Unison Fluorescent Option Module will provide up to (24) 0-10V signals from a single unit. The dimming module has also been tested with a 0-10V converter from Northlight Systems.
Lutron Products
0-10 V (current sink) IEC 60929
Entire Room ControlsRadio TouchTM includedmicroWattTM includedGrafi k Eye 3000/2000 GRX-TVI 4000® TVM Module GXI includedSpacer System SPSF-6A + GRX-TVI
Building ControlsBuilding ControlsLCP128TM TVM ModuleG5000TM/6000®/7000TM TVM Module
Whole Home ControlsRadio RA® RA-6ND + GRX-TVIHomeworks® GRX-TVI, TVM
WallboxNovaT*® NTFTVNova® NFTVVareo® 2 VF10 + GRX-TVIDiva® 2 DVF103P + GRX-TVISkylark® 2 SF103P + GRX-TVI
Source: Lutron Application Note #138:
**Please contact specifi c manufacturers for details on specifi c dimming control.
Tested by OSRAM
Manufacturer Type ModelManufacturer Type ModelManufacturer Type Model
HUNT 0 - 10 wall mount PS-010Leviton 0 - 10 wall mount IP710-DLWLightolie 0 - 10 wall mount ZP600F-AM 120WLutron 0 - 10 wall mount NTFTV Series Control Panel Grafi k Eye Converter to 0- 10v dc GRX-TVI, GRX-TVMNortLight Systems DMX to 0-10v Converter 8 channels 24 channels
Source: OSRAM’s “Controllers for LED Modules” powerpoint
10
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
20 30 40 50 60
Output Power in Watts
Power loss curve for OTDIM
Po
we
r Lo
ss in
Wa
tts
70 80 90 100 110 120
10V
24V
IO PART#: 250IOXFDIM
Wiring Diagram
Key Features Utilizes pulse width modulation
(PWM), to control LED performance Options available for analog
or DMX protocols Dimming range: 0-100% Short circuit, overload and
overheating protection
specificationsLocation: DryInput Voltage: 24v DCMax Input Current: 5.3AControl Voltage: 0-10v DCFrequency: 135 HZAmbient Temp: -20˚C to +50˚CWeight: .165 lbsPower Consumption: up to 3w
io Lighting 370 Corporate Woods Pkwy Vernon Hills, IL 60061-3107 T 847.735.7000 F 847.735.7001 E [email protected] W iolighting.com
Dimming Module Key Features• Utilizes pulse width
modulation, (PWM) tocontrol LED performance
• Options available for analogor DMX control protocols
• Dimming range: 0-100%• Short circuit, overload and
overheating protection
SpecificationsLocation: DryInput Voltage: 24v DCMax. Input Current: 5.3AControl Voltage: 0-10V DCOutput Frequency: 135 HZAmbient Temp: -20C to +50CWeight: .165 lbsPower Consumption Up to 3W
.13"3.5mm3.5mm
1.65"42mm42mm
.78"20mm
6.46 ± .02"164 ± 0.3 mm164 ± 0.3 mm
6.77 ± .02"6.77 ± .02"172 ± 0.3 mm
serutxiFDEL
gnimmiDeludoM
Input Line Voltageoltage
Control signal 1...10VDC
revirDDEL
Exterior Rated Enclosure
Two dimming modules can be located in each 11"x4"x4" enclosure
Specify wire gage, and number of dimming modules.
DMX CompatibilityA DMX to 0-10V converter will typically be required to interface with DMX control systems. ETC has tested the dimming module with the Unison Series Dimming Rack. The Unison Fluorescent Option Module will provide up to (24) 0-10V signals from a single unit. The dimming module has also been tested with a 0-10V converter from Northlight Systems.
Lutron Products
0-10 V (current sink) IEC 60929
Entire Room ControlsRadio TouchTM includedmicroWattTM includedGrafi k Eye 3000/2000 GRX-TVI 4000® TVM Module GXI includedSpacer System SPSF-6A + GRX-TVI
Building ControlsBuilding ControlsLCP128TM TVM ModuleG5000TM/6000®/7000TM TVM Module
Whole Home ControlsRadio RA® RA-6ND + GRX-TVIHomeworks® GRX-TVI, TVM
WallboxNovaT*® NTFTVNova® NFTVVareo® 2 VF10 + GRX-TVIDiva® 2 DVF103P + GRX-TVISkylark® 2 SF103P + GRX-TVI
Source: Lutron Application Note #138:
**Please contact specifi c manufacturers for details on specifi c dimming control.
Tested by OSRAM
Manufacturer Type ModelManufacturer Type ModelManufacturer Type Model
HUNT 0 - 10 wall mount PS-010Leviton 0 - 10 wall mount IP710-DLWLightolie 0 - 10 wall mount ZP600F-AM 120WLutron 0 - 10 wall mount NTFTV Series Control Panel Grafi k Eye Converter to 0- 10v dc GRX-TVI, GRX-TVMNortLight Systems DMX to 0-10v Converter 8 channels 24 channels
Source: OSRAM’s “Controllers for LED Modules” powerpoint
10
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
20 30 40 50 60
Output Power in Watts
Power loss curve for OTDIM
Po
we
r Lo
ss in
Wa
tts
70 80 90 100 110 120
10V
24V
IO PART#: 250IOXFDIM
Wiring Diagram
Tested by osrAM
io Lighting 370 Corporate Woods Pkwy Vernon Hills, IL 60061-3107 T 847.735.7000 F 847.735.7001 E [email protected] W iolighting.com
Dimming Module Key Features• Utilizes pulse width
modulation, (PWM) tocontrol LED performance
• Options available for analogor DMX control protocols
• Dimming range: 0-100%• Short circuit, overload and
overheating protection
SpecificationsLocation: DryInput Voltage: 24v DCMax. Input Current: 5.3AControl Voltage: 0-10V DCOutput Frequency: 135 HZAmbient Temp: -20C to +50CWeight: .165 lbsPower Consumption Up to 3W
.13"3.5mm3.5mm
1.65"42mm42mm
.78"20mm
6.46 ± .02"164 ± 0.3 mm164 ± 0.3 mm
6.77 ± .02"6.77 ± .02"172 ± 0.3 mm
serutxiFDEL
gnimmiDeludoM
Input Line Voltageoltage
Control signal 1...10VDC
revirDDEL
Exterior Rated Enclosure
Two dimming modules can be located in each 11"x4"x4" enclosure
Specify wire gage, and number of dimming modules.
DMX CompatibilityA DMX to 0-10V converter will typically be required to interface with DMX control systems. ETC has tested the dimming module with the Unison Series Dimming Rack. The Unison Fluorescent Option Module will provide up to (24) 0-10V signals from a single unit. The dimming module has also been tested with a 0-10V converter from Northlight Systems.
Lutron Products
0-10 V (current sink) IEC 60929
Entire Room ControlsRadio TouchTM includedmicroWattTM includedGrafi k Eye 3000/2000 GRX-TVI 4000® TVM Module GXI includedSpacer System SPSF-6A + GRX-TVI
Building ControlsBuilding ControlsLCP128TM TVM ModuleG5000TM/6000®/7000TM TVM Module
Whole Home ControlsRadio RA® RA-6ND + GRX-TVIHomeworks® GRX-TVI, TVM
WallboxNovaT*® NTFTVNova® NFTVVareo® 2 VF10 + GRX-TVIDiva® 2 DVF103P + GRX-TVISkylark® 2 SF103P + GRX-TVI
Source: Lutron Application Note #138:
**Please contact specifi c manufacturers for details on specifi c dimming control.
Tested by OSRAM
Manufacturer Type ModelManufacturer Type ModelManufacturer Type Model
HUNT 0 - 10 wall mount PS-010Leviton 0 - 10 wall mount IP710-DLWLightolie 0 - 10 wall mount ZP600F-AM 120WLutron 0 - 10 wall mount NTFTV Series Control Panel Grafi k Eye Converter to 0- 10v dc GRX-TVI, GRX-TVMNortLight Systems DMX to 0-10v Converter 8 channels 24 channels
Source: OSRAM’s “Controllers for LED Modules” powerpoint
10
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
20 30 40 50 60
Output Power in Watts
Power loss curve for OTDIM
Po
we
r Lo
ss in
Wa
tts
70 80 90 100 110 120
10V
24V
IO PART#: 250IOXFDIM
Wiring Diagramwiring Diagram
io Lighting 370 Corporate Woods Pkwy Vernon Hills, IL 60061-3107 T 847.735.7000 F 847.735.7001 E [email protected] W iolighting.com
Dimming Module Key Features• Utilizes pulse width
modulation, (PWM) tocontrol LED performance
• Options available for analogor DMX control protocols
• Dimming range: 0-100%• Short circuit, overload and
overheating protection
SpecificationsLocation: DryInput Voltage: 24v DCMax. Input Current: 5.3AControl Voltage: 0-10V DCOutput Frequency: 135 HZAmbient Temp: -20C to +50CWeight: .165 lbsPower Consumption Up to 3W
.13"3.5mm3.5mm
1.65"42mm42mm
.78"20mm
6.46 ± .02"164 ± 0.3 mm164 ± 0.3 mm
6.77 ± .02"6.77 ± .02"172 ± 0.3 mm
serutxiFDEL
gnimmiDeludoM
Input Line Voltageoltage
Control signal 1...10VDC
revirDDEL
Exterior Rated Enclosure
Two dimming modules can be located in each 11"x4"x4" enclosure
Specify wire gage, and number of dimming modules.
DMX CompatibilityA DMX to 0-10V converter will typically be required to interface with DMX control systems. ETC has tested the dimming module with the Unison Series Dimming Rack. The Unison Fluorescent Option Module will provide up to (24) 0-10V signals from a single unit. The dimming module has also been tested with a 0-10V converter from Northlight Systems.
Lutron Products
0-10 V (current sink) IEC 60929
Entire Room ControlsRadio TouchTM includedmicroWattTM includedGrafi k Eye 3000/2000 GRX-TVI 4000® TVM Module GXI includedSpacer System SPSF-6A + GRX-TVI
Building ControlsBuilding ControlsLCP128TM TVM ModuleG5000TM/6000®/7000TM TVM Module
Whole Home ControlsRadio RA® RA-6ND + GRX-TVIHomeworks® GRX-TVI, TVM
WallboxNovaT*® NTFTVNova® NFTVVareo® 2 VF10 + GRX-TVIDiva® 2 DVF103P + GRX-TVISkylark® 2 SF103P + GRX-TVI
Source: Lutron Application Note #138:
**Please contact specifi c manufacturers for details on specifi c dimming control.
Tested by OSRAM
Manufacturer Type ModelManufacturer Type ModelManufacturer Type Model
HUNT 0 - 10 wall mount PS-010Leviton 0 - 10 wall mount IP710-DLWLightolie 0 - 10 wall mount ZP600F-AM 120WLutron 0 - 10 wall mount NTFTV Series Control Panel Grafi k Eye Converter to 0- 10v dc GRX-TVI, GRX-TVMNortLight Systems DMX to 0-10v Converter 8 channels 24 channels
Source: OSRAM’s “Controllers for LED Modules” powerpoint
10
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
20 30 40 50 60
Output Power in Watts
Power loss curve for OTDIMP
ow
er
Lo
ss in
Wa
tts
70 80 90 100 110 120
10V
24V
IO PART#: 250IOXFDIM
Wiring Diagram
io Lighting 370 Corporate Woods Pkwy Vernon Hills, IL 60061-3107 T 847.735.7000 F 847.735.7001 E [email protected] W iolighting.com
Dimming Module Key Features• Utilizes pulse width
modulation, (PWM) tocontrol LED performance
• Options available for analogor DMX control protocols
• Dimming range: 0-100%• Short circuit, overload and
overheating protection
SpecificationsLocation: DryInput Voltage: 24v DCMax. Input Current: 5.3AControl Voltage: 0-10V DCOutput Frequency: 135 HZAmbient Temp: -20C to +50CWeight: .165 lbsPower Consumption Up to 3W
.13"3.5mm3.5mm
1.65"42mm42mm
.78"20mm
6.46 ± .02"164 ± 0.3 mm164 ± 0.3 mm
6.77 ± .02"6.77 ± .02"172 ± 0.3 mm
serutxiFDEL
gnimmiDeludoM
Input Line Voltageoltage
Control signal 1...10VDC
revirDDEL
Exterior Rated Enclosure
Two dimming modules can be located in each 11"x4"x4" enclosure
Specify wire gage, and number of dimming modules.
DMX CompatibilityA DMX to 0-10V converter will typically be required to interface with DMX control systems. ETC has tested the dimming module with the Unison Series Dimming Rack. The Unison Fluorescent Option Module will provide up to (24) 0-10V signals from a single unit. The dimming module has also been tested with a 0-10V converter from Northlight Systems.
Lutron Products
0-10 V (current sink) IEC 60929
Entire Room ControlsRadio TouchTM includedmicroWattTM includedGrafi k Eye 3000/2000 GRX-TVI 4000® TVM Module GXI includedSpacer System SPSF-6A + GRX-TVI
Building ControlsBuilding ControlsLCP128TM TVM ModuleG5000TM/6000®/7000TM TVM Module
Whole Home ControlsRadio RA® RA-6ND + GRX-TVIHomeworks® GRX-TVI, TVM
WallboxNovaT*® NTFTVNova® NFTVVareo® 2 VF10 + GRX-TVIDiva® 2 DVF103P + GRX-TVISkylark® 2 SF103P + GRX-TVI
Source: Lutron Application Note #138:
**Please contact specifi c manufacturers for details on specifi c dimming control.
Tested by OSRAM
Manufacturer Type ModelManufacturer Type ModelManufacturer Type Model
HUNT 0 - 10 wall mount PS-010Leviton 0 - 10 wall mount IP710-DLWLightolie 0 - 10 wall mount ZP600F-AM 120WLutron 0 - 10 wall mount NTFTV Series Control Panel Grafi k Eye Converter to 0- 10v dc GRX-TVI, GRX-TVMNortLight Systems DMX to 0-10v Converter 8 channels 24 channels
Source: OSRAM’s “Controllers for LED Modules” powerpoint
10
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
20 30 40 50 60
Output Power in Watts
Power loss curve for OTDIM
Po
we
r Lo
ss in
Wa
tts
70 80 90 100 110 120
10V
24V
IO PART#: 250IOXFDIM
Wiring Diagram
io Lighting 370 Corporate Woods Pkwy Vernon Hills, IL 60061-3107 T 847.735.7000 F 847.735.7001 E [email protected] W iolighting.com
Dimming Module Key Features• Utilizes pulse width
modulation, (PWM) tocontrol LED performance
• Options available for analogor DMX control protocols
• Dimming range: 0-100%• Short circuit, overload and
overheating protection
SpecificationsLocation: DryInput Voltage: 24v DCMax. Input Current: 5.3AControl Voltage: 0-10V DCOutput Frequency: 135 HZAmbient Temp: -20C to +50CWeight: .165 lbsPower Consumption Up to 3W
.13"3.5mm3.5mm
1.65"42mm42mm
.78"20mm
6.46 ± .02"164 ± 0.3 mm164 ± 0.3 mm
6.77 ± .02"6.77 ± .02"172 ± 0.3 mm
serutxiFDEL
gnimmiDeludoM
Input Line Voltageoltage
Control signal 1...10VDC
revirDDEL
Exterior Rated Enclosure
Two dimming modules can be located in each 11"x4"x4" enclosure
Specify wire gage, and number of dimming modules.
DMX CompatibilityA DMX to 0-10V converter will typically be required to interface with DMX control systems. ETC has tested the dimming module with the Unison Series Dimming Rack. The Unison Fluorescent Option Module will provide up to (24) 0-10V signals from a single unit. The dimming module has also been tested with a 0-10V converter from Northlight Systems.
Lutron Products
0-10 V (current sink) IEC 60929
Entire Room ControlsRadio TouchTM includedmicroWattTM includedGrafi k Eye 3000/2000 GRX-TVI 4000® TVM Module GXI includedSpacer System SPSF-6A + GRX-TVI
Building ControlsBuilding ControlsLCP128TM TVM ModuleG5000TM/6000®/7000TM TVM Module
Whole Home ControlsRadio RA® RA-6ND + GRX-TVIHomeworks® GRX-TVI, TVM
WallboxNovaT*® NTFTVNova® NFTVVareo® 2 VF10 + GRX-TVIDiva® 2 DVF103P + GRX-TVISkylark® 2 SF103P + GRX-TVI
Source: Lutron Application Note #138:
**Please contact specifi c manufacturers for details on specifi c dimming control.
Tested by OSRAM
Manufacturer Type ModelManufacturer Type ModelManufacturer Type Model
HUNT 0 - 10 wall mount PS-010Leviton 0 - 10 wall mount IP710-DLWLightolie 0 - 10 wall mount ZP600F-AM 120WLutron 0 - 10 wall mount NTFTV Series Control Panel Grafi k Eye Converter to 0- 10v dc GRX-TVI, GRX-TVMNortLight Systems DMX to 0-10v Converter 8 channels 24 channels
Source: OSRAM’s “Controllers for LED Modules” powerpoint
10
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
20 30 40 50 60
Output Power in Watts
Power loss curve for OTDIMP
ow
er
Lo
ss in
Wa
tts
70 80 90 100 110 120
10V
24V
IO PART#: 250IOXFDIM
Wiring Diagram
io Lighting 370 Corporate Woods Pkwy Vernon Hills, IL 60061-3107 T 847.735.7000 F 847.735.7001 E [email protected] W iolighting.com
Dimming Module Key Features• Utilizes pulse width
modulation, (PWM) tocontrol LED performance
• Options available for analogor DMX control protocols
• Dimming range: 0-100%• Short circuit, overload and
overheating protection
SpecificationsLocation: DryInput Voltage: 24v DCMax. Input Current: 5.3AControl Voltage: 0-10V DCOutput Frequency: 135 HZAmbient Temp: -20C to +50CWeight: .165 lbsPower Consumption Up to 3W
.13"3.5mm3.5mm
1.65"42mm42mm
.78"20mm
6.46 ± .02"164 ± 0.3 mm164 ± 0.3 mm
6.77 ± .02"6.77 ± .02"172 ± 0.3 mm
serutxiFDEL
gnimmiDeludoM
Input Line Voltageoltage
Control signal 1...10VDC
revirDDEL
Exterior Rated Enclosure
Two dimming modules can be located in each 11"x4"x4" enclosure
Specify wire gage, and number of dimming modules.
DMX CompatibilityA DMX to 0-10V converter will typically be required to interface with DMX control systems. ETC has tested the dimming module with the Unison Series Dimming Rack. The Unison Fluorescent Option Module will provide up to (24) 0-10V signals from a single unit. The dimming module has also been tested with a 0-10V converter from Northlight Systems.
Lutron Products
0-10 V (current sink) IEC 60929
Entire Room ControlsRadio TouchTM includedmicroWattTM includedGrafi k Eye 3000/2000 GRX-TVI 4000® TVM Module GXI includedSpacer System SPSF-6A + GRX-TVI
Building ControlsBuilding ControlsLCP128TM TVM ModuleG5000TM/6000®/7000TM TVM Module
Whole Home ControlsRadio RA® RA-6ND + GRX-TVIHomeworks® GRX-TVI, TVM
WallboxNovaT*® NTFTVNova® NFTVVareo® 2 VF10 + GRX-TVIDiva® 2 DVF103P + GRX-TVISkylark® 2 SF103P + GRX-TVI
Source: Lutron Application Note #138:
**Please contact specifi c manufacturers for details on specifi c dimming control.
Tested by OSRAM
Manufacturer Type ModelManufacturer Type ModelManufacturer Type Model
HUNT 0 - 10 wall mount PS-010Leviton 0 - 10 wall mount IP710-DLWLightolie 0 - 10 wall mount ZP600F-AM 120WLutron 0 - 10 wall mount NTFTV Series Control Panel Grafi k Eye Converter to 0- 10v dc GRX-TVI, GRX-TVMNortLight Systems DMX to 0-10v Converter 8 channels 24 channels
Source: OSRAM’s “Controllers for LED Modules” powerpoint
10
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
20 30 40 50 60
Output Power in Watts
Power loss curve for OTDIMP
ow
er
Lo
ss in
Wa
tts
70 80 90 100 110 120
10V
24V
IO PART#: 250IOXFDIM
Wiring Diagram
io Lighting 370 Corporate Woods Pkwy Vernon Hills, IL 60061-3107 T 847.735.7000 F 847.735.7001 E [email protected] W iolighting.com
Dimming Module Key Features• Utilizes pulse width
modulation, (PWM) tocontrol LED performance
• Options available for analogor DMX control protocols
• Dimming range: 0-100%• Short circuit, overload and
overheating protection
SpecificationsLocation: DryInput Voltage: 24v DCMax. Input Current: 5.3AControl Voltage: 0-10V DCOutput Frequency: 135 HZAmbient Temp: -20C to +50CWeight: .165 lbsPower Consumption Up to 3W
.13"3.5mm3.5mm
1.65"42mm42mm
.78"20mm
6.46 ± .02"164 ± 0.3 mm164 ± 0.3 mm
6.77 ± .02"6.77 ± .02"172 ± 0.3 mm
serutxiFDEL
gnimmiDeludoM
Input Line Voltageoltage
Control signal 1...10VDC
revirDDEL
Exterior Rated Enclosure
Two dimming modules can be located in each 11"x4"x4" enclosure
Specify wire gage, and number of dimming modules.
DMX CompatibilityA DMX to 0-10V converter will typically be required to interface with DMX control systems. ETC has tested the dimming module with the Unison Series Dimming Rack. The Unison Fluorescent Option Module will provide up to (24) 0-10V signals from a single unit. The dimming module has also been tested with a 0-10V converter from Northlight Systems.
Lutron Products
0-10 V (current sink) IEC 60929
Entire Room ControlsRadio TouchTM includedmicroWattTM includedGrafi k Eye 3000/2000 GRX-TVI 4000® TVM Module GXI includedSpacer System SPSF-6A + GRX-TVI
Building ControlsBuilding ControlsLCP128TM TVM ModuleG5000TM/6000®/7000TM TVM Module
Whole Home ControlsRadio RA® RA-6ND + GRX-TVIHomeworks® GRX-TVI, TVM
WallboxNovaT*® NTFTVNova® NFTVVareo® 2 VF10 + GRX-TVIDiva® 2 DVF103P + GRX-TVISkylark® 2 SF103P + GRX-TVI
Source: Lutron Application Note #138:
**Please contact specifi c manufacturers for details on specifi c dimming control.
Tested by OSRAM
Manufacturer Type ModelManufacturer Type ModelManufacturer Type Model
HUNT 0 - 10 wall mount PS-010Leviton 0 - 10 wall mount IP710-DLWLightolie 0 - 10 wall mount ZP600F-AM 120WLutron 0 - 10 wall mount NTFTV Series Control Panel Grafi k Eye Converter to 0- 10v dc GRX-TVI, GRX-TVMNortLight Systems DMX to 0-10v Converter 8 channels 24 channels
Source: OSRAM’s “Controllers for LED Modules” powerpoint
10
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
20 30 40 50 60
Output Power in Watts
Power loss curve for OTDIM
Po
we
r Lo
ss in
Wa
tts
70 80 90 100 110 120
10V
24V
IO PART#: 250IOXFDIM
Wiring Diagram
io Lighting 370 Corporate Woods Pkwy Vernon Hills, IL 60061-3107 T 847.735.7000 F 847.735.7001 E [email protected] W iolighting.com
Dimming Module Key Features• Utilizes pulse width
modulation, (PWM) tocontrol LED performance
• Options available for analogor DMX control protocols
• Dimming range: 0-100%• Short circuit, overload and
overheating protection
SpecificationsLocation: DryInput Voltage: 24v DCMax. Input Current: 5.3AControl Voltage: 0-10V DCOutput Frequency: 135 HZAmbient Temp: -20C to +50CWeight: .165 lbsPower Consumption Up to 3W
.13"3.5mm3.5mm
1.65"42mm42mm
.78"20mm
6.46 ± .02"164 ± 0.3 mm164 ± 0.3 mm
6.77 ± .02"6.77 ± .02"172 ± 0.3 mm
serutxiFDEL
gnimmiDeludoM
Input Line Voltageoltage
Control signal 1...10VDC
revirDDEL
Exterior Rated Enclosure
Two dimming modules can be located in each 11"x4"x4" enclosure
Specify wire gage, and number of dimming modules.
DMX CompatibilityA DMX to 0-10V converter will typically be required to interface with DMX control systems. ETC has tested the dimming module with the Unison Series Dimming Rack. The Unison Fluorescent Option Module will provide up to (24) 0-10V signals from a single unit. The dimming module has also been tested with a 0-10V converter from Northlight Systems.
Lutron Products
0-10 V (current sink) IEC 60929
Entire Room ControlsRadio TouchTM includedmicroWattTM includedGrafi k Eye 3000/2000 GRX-TVI 4000® TVM Module GXI includedSpacer System SPSF-6A + GRX-TVI
Building ControlsBuilding ControlsLCP128TM TVM ModuleG5000TM/6000®/7000TM TVM Module
Whole Home ControlsRadio RA® RA-6ND + GRX-TVIHomeworks® GRX-TVI, TVM
WallboxNovaT*® NTFTVNova® NFTVVareo® 2 VF10 + GRX-TVIDiva® 2 DVF103P + GRX-TVISkylark® 2 SF103P + GRX-TVI
Source: Lutron Application Note #138:
**Please contact specifi c manufacturers for details on specifi c dimming control.
Tested by OSRAM
Manufacturer Type ModelManufacturer Type ModelManufacturer Type Model
HUNT 0 - 10 wall mount PS-010Leviton 0 - 10 wall mount IP710-DLWLightolie 0 - 10 wall mount ZP600F-AM 120WLutron 0 - 10 wall mount NTFTV Series Control Panel Grafi k Eye Converter to 0- 10v dc GRX-TVI, GRX-TVMNortLight Systems DMX to 0-10v Converter 8 channels 24 channels
Source: OSRAM’s “Controllers for LED Modules” powerpoint
10
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
20 30 40 50 60
Output Power in Watts
Power loss curve for OTDIM
Po
we
r Lo
ss in
Wa
tts
70 80 90 100 110 120
10V
24V
IO PART#: 250IOXFDIM
Wiring Diagram
DMX Compatibility A DMX to 0-10V converter will typically be required to interface with DMX control systems. ETC has tested the dimming module with the Unison Series Dimming Rack. The Unison Flourescent Option Module will provide up to (24) 0-10 signals from a single unit. The dimming module has also been tested with a 0-10 converter from Northlight Systems.
Mississippi River OverlookDesigner: HOKPhotographer: Dave Pickett
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com