Presented by-Subham Kumar Ghosh

Introduction

It is established in 2004 It is an ISO certified company Walplast have 6 manufacturing unit in all over India It is the highest manufacturing wallputty company It is a fastest growing company in wallputty passionate about quality and innovation

Products

Ready mix plaster Tile adhesive Masterplast

Ready mix Plaster

It is plaster which is ready to use at site by just mixing water.

It helps to eliminate job site mixing practices.

It is useful for both interior as well as exterior walls.

It provides protection against penetration of rainwater and other atmospheric change

Ready mix Plaster

Ingredients 4 type of sand1. 0 – 0.5mm2. 0.5 – 1mm3. 1 – 2mm4. 2 – 3.5mm Grey cement Polymers

Ready mix Plaster

Features and Benefits Compact plaster, reduce void gap Negligible silt content Reduces rebounding loss Cuts the repair and maintenance cost Paint finish wall Increases workability

Ready mix Plaster

Preparation , Mixing , Application

7-8 litre of water for 40 kg bag 4-5 mintues mixing , wait for 2-3 minutes and remix

again and it is ready for use Use steel trowel or wooden float for optimum bonding

Ready mix Plaster

Coverage 10-12mm light weight blocks is 17-18 sq.ft 10-12mm brick wall is 14-15 sq.ft 18mm light weight blocks is 11 sq.ft 25mm brick wall is 7- 7.5 sq.ft 10mm RCC is 20-22 sq.ft Pot life is 90 mins Intial setting time is 30 mins and final setting time is 600 mins

Tile Adhesive

It is ISI certified tile adhesive product Is available in 3 categories1. Silver star2. Gold star 3. Platinum star It contains high performance polymer

Tile Adhesive

Ingredients Highest grade of graded sand Grey cement for silver and gold star tile adhesive white cement for platinum star tile adhesive Polymers Selective fillers Chemical additives

Tile Adhesive

Features and benefits Excellent bonding to the base plaster which gives better

workability and durability Water resistant which is suitable for both interior and

exterior wall Can be used on new as well as old wall and floors Consistent work quality

Tile Adhesive

Application & Mixing and Preparation Silver Star and Gold star for 20 kg bag 5-5.5 litre water Platinum star requires 6-6.5 litre water for 20 kg bag Silver star is also available in 40 kg bag which require 10-

11 litre water Mix the content till it become lump free wait for 5 mins

and remix again for 2 mins and it is ready to use Use a steel trowel / blade to apply the mix Use a notched trowel to remove excess material, which is

6mm brush size.

Tile Adhesive

Coverage and Technical detail Open time 20 mins Adjustability time 5-15 mins Pot life 30 mins Initial setting time 30 minute Setting time 24 hours 2-3 sq.ft/kg for 3mm thickness

It is chemically active agent that improves the water retention

It creates smooth surface and it helps in to spread plaster easily

It helps to reduce cracks due to quality in built fibres

Ingredients and Application Lime and high quality polymers 500 gm pouch for 50 kg cement

Features and Benefits Excellent workability Optimum drying time Increase bond strength of mortar Easy spreadability Reduces re-bonding losses Reduces crack formation

Why us ?

Timely delivery Passion for innovation & Quality Transparent business policies Cost-effective prices Well trained professionals A long list of satisfied clients

Contact us

Walplast Prtoducts Private Limited

Rainbow Building ,plot no. 13,sector-24,Near Shikara Hotel,Opposite Sanpada Railway

station ,Turbhe Naka ,Vashi,Navi Mumbai,

Maharashtra -400705,india

www.walplast.co.in

THANK YOU