wavewatch - netflex.lightriver.com
TRANSCRIPT
PROACTIVE NETWORK HEALTH SERVICES
Today’s Network Opera1ons organiza1ons are hard pressed to keep up with the demands of network growth, customer requests and base level event and alarm handling. As a result, network assurance teams are mostly reac1ve in nature, wai1ng-and-watching for something to break, swivel-chairing between disparate supplier management systems or associated direct interfaces (i.e CLI) and not ready to take on proac1ve network management.
LightRiver provides proac1ve monitoring of op1cal network health for companies that are not ready to invest in a network management system nor have the personnel required to proac1vely manage their cri1cal Op1cal Network infrastructure and customer services.
LightRiver WaveWatch provides the automa1on, advanced data & analy1cs and Op1cal Engineering personnel to take ac1on on these issues before they are service disrup1ng and/or reduce the impact of those impairments that are unavoidable.
WaveWatch leverages netFLEX® for data collec1on, trending and learning algorithms to make the data ‘ac1onable.’ Autonomous Networking is used to automa1cally detect, test, isolate and either auto-remediate an issue or no1fy the LightRiver Network Health Engineer to respond appropriately. netFLEX has industry-leading op1cal technology support for mul1-vendor and mul1-genera1on solu1ons to include network disaggrega1on (Open Op1cal). Technology plaRorms include Routers, ROADM, DCI, Line Systems, Pluggables and broader.
A dedicated LightRiver Engineer will gather baseline data from the network, establish automa1on profiles (Intent Based Networking) and set-up proac1ve no1fica1ons as defined against the Service Level Objec1ves for the customer. AZer upfront automa1ons and baselines are programmed, the Engineer will access the netFLEX PlaRorm daily/weekly and provide monthly reports to the customer on the performance of their network (as well as 1mely updates if excep1ons occur).
The engineer will proac1vely monitor the deployment to verify the system is running properly, review the various performance monitoring reports and look for chronic issues. Capacity monitoring and management is also provided on behalf of the customer.
Customers may also request specific wavelengths or circuits be given special a\en1on and monitored even more closely. The netFLEX plaRorm will be configured to automa1cally no1fy the Engineer immediately for any of the following issues:
NETWORK HEALTH ENGINEER
UH-OH... WAVES DOWN AGAIN?
+ +AutomationNetwork Engineer Data & Analytics
The netFLEX automa1on plaRorm is hosted by LightRiver and would be either:
Cloud-based (SoZware-as-a-Service via AWS, Azure, etc.) with secure access to the customer network (preferred)
Onsite Appliance with remote VPN access
1.
2.
NETFLEX HOSTING OPTIONS
ORCloud Hosted On Premises
• NE Loss of Visibility
• Database Backup Failure
• Cri1cal OTN Alarms
• Cri1cal Client Alarms
• Out of Spec Light Levels
• Degrading Light Levels
• Other High Priority Items
WAVEWATCH
SiteC
SiteB
SiteR
SiteG
SiteS
SiteH
SiteJ
SiteK
SiteT SiteD
SiteN
SiteESiteN
SiteF
SiteA
SiteQ
SiteM
SiteP
netFLEX.lightriver.com
XCVR
ET-1/0/22
TC: 100G
Card Type: PORTCARD
Port State: up, up
Alarm/Condi:on: domRxLossSignal
RX Light Level: [-5.25/10.50]
-4.40, -3.20, -3.80, -4.30
TX Light Level: [-4.30/11.25]
2.40, 2.00, 1.50, 1.90
Media Rate: 100 Gpbs
Traffic Test:
Current 24hr PM Data:
CARRIERTRANS: 3
ET-1/0/22
TC: 100G
Card Type: PORTCARD
Port State: up, up
Alarm/Condi:on: domRxLossSignal
RX Light Level: [-5.25/10.50]
-4.40, -3.20, -3.80, -4.30
TX Light Level: [-4.30/11.25]
2.40, 2.00, 1.50, 1.90
Media Rate: 100 Gpbs
Traffic Test:
Current 24hr PM Data:
CARRIERTRANS: 3
Router(PAM4 or 400GZR/ZR+)
Line System(multi-vendor, multi-device)
Line System(multi-vendor, multi-device)
Router(PAM4 or 400GZR/ZR+)
ET-1/0/22
if-1/9580
it-1/line-9580
it-1/line-9580
if-1/9580
ET-1/0/22
if-1/9580
if-1/line-9580
TC: OA
Card Type: DCP-M_CHASSIS
Port State: idle
Alarm/Condi:on: NE Comm. Down
RX Light Level: [-99/-99] -4.47
TX Light Level: [-99/-99] -2.24
Wavelength: 1302.00
Current 24hr PM Data:
RXPWR/R: -0.45. TXPWR/T: -0.22
TC: OA
Card Type: DCP-M_CHASSIS
Port State: up
Alarm/Condi:on: NE Comm. Down
RX Light Level: [-99/-99] -1.03
TX Light Level: [-99/-99] -1.24
if-1/line-9580
if-1/9580
TC: OA
Card Type: DCP-M_CHASSIS
Port State: up
Alarm/Condi:on: NE Comm. Down
RX Light Level: [-99/-99] -1.82
TX Light Level: [-99/-99] -0.43
TC: OA
Card Type: DCP-M_CHASSIS
Port State: idle
Alarm/Condi:on: NE Comm. Down
RX Light Level: [-99/-99] -4.23
TX Light Level: [-99/-99] -3.14
Wavelength: 1531.12
Current 24hr PM Data:
RXPWR/R: -0.45. TXPWR/T: -0.22
λ λ
Example of Patented Assurance Automa4onFull Device Support List: h=ps://ne?lex.lightriver.com/dev-toolkit/
As more proacXve issues can be resolved prior to a service interrupXon, the number of reacXve issues trend downward. This allows for controlled maintenance work that is meaningful, fewer outages, less overXme and be\er customer saXsfacXon.
Customers are billed based on the number of acXve Wavelength Carriers and/or Network Elements under monitoring and management by netFLEX at a compeXXve rate. Volume discounts will be applied to large networks with large amounts of wavelengths to proacXvely monitor.
THE CASE FOR PROACTIVE SERVICE ASSURANCE
PRICING
Proac&ve Issues Resolved
Reac&ve Troubles• ProacXve vs ReacXve Handling
• Drives down cost of credits paid out from missed SLA’s
• Creates a less stressful work environment
• Improves the Customer Experience
End CustomerOperator / SP Non-TraditionalService Provider
Realtime Inventory Data & Analytics(AI/ML)
~ 300 Supported Network Element Types
Direct Connect
Network ControlAutomation
UI & API
LegacyDevices
PacketDevices
NetworkDisaggregation
WavelengthDevices
netFLEX was architected for end-to-end network and service automaXon where realXme (discovered) inventory, acXonable analyXcs and control automaXon were built for SDN abstracXon to allow for uniform management of mulX-vendor and mulX-technology to make it ‘all look the same.’ This comprehensive OpXcal Domain Controller Framework supports full life-cycle service automaXon of legacy and nextgen transport networks. netFLEX supports a full complement of network-health-automaXon leveraging data/analyXcs to baseline performance and make it all ‘acXonable.’
• SDN: end-2-end network abstracXon
• MulX-Vendor SoluXon
• Network FLEXibility across every funcXonal area
• Programmability as defined by operator & customer
• Enablement of UI & API for seamless digital experience
Realize True Network Flexibility