All Diploma - Ist Semester

Computer Application Lab

1. Key in the various internal dos commands and observe the output.

2. Create a new document and perform the following. i) Type text document of about 200words.

ii) Select the second line of text and delete. iii) Select the third line of text and change the font style, size and color. iv) Add bullets and insert border line to the page, v) Format the paragraph and align.

a) Left - 1” b) Right - 1” c) Top - 1.5”d) Bottom - 1.5” e) Line spacing between the lines up to 6 pts.

vi) Save the document and create a duplicate copy of the same.

3. Prepare a document about history and evolution of computers with not less than 500 words and a minimum of 3 paragraphs and perform.

i) Add a drop cap letter to the first word in the Ist paragraph. ii) Use appropriate title and apply style to that.

iii) Insert a table with 3 rows and 3 columns and make the outer box of the able thicker.

iv) Check for spelling and grammar and change the paper size to “legal” v) Add header as history and evolution and footer with page no and insert data

and time. 4. (i)Record a macro and run this macro.

(ii)Create a hyperlink named my pictures and in the linked document gif image.

5. Create a spread sheet with employee details such as employee numbers, name, and designation salary. Enter 10 employees information.

i) Resize the cell width and height. ii) Arrange the name column in ascending order.

iii) Format the salary column with decimal up to 2 points. iv) Insert a new column Date –Of-Join between name and designation fields.

6. Create a spread sheet with student details such as Register Numbers, Name, Sub1, Sub2, Sub3, Sub4. Enter 10 students information.

i) Insert a column named serial no. and use auto fill option to fill the series. ii) Use auto sum option to find the total of sub1, sub2, sub3, sub4.

iii) Create a column graph with student name in x axis against total. iv) Name the chart title as marks title x axis title as student and y axis title as

total.

7. Prepare a PowerPoint presentation about classifications of computes. Use various font style, customized bullet numbering; add a new background pattern to the slide. Insert slide animation and add transition effects.

8. Create a blank data base of students with fields like Reg. No., name, address, class, combination, fees, date of admission and enter data into the fields enter brief description of the field, size set Reg, No. as Primary Key. Hide the address field create a form in design view with all the above fields and input data into the table by filling the fields of the form create another table department with fields dept. code, dept_name, dept_head and set a relation ship between student and department.

Basic Workshop Pracatice (Dip)

1. Practice correctly safety procedures in the workshop.

2. Perform sheet metal work according to prescribed procedures.

3. Carry out correctly basic gas and arc welding works involving various processes of welding and types of joining metals.

4. Describe clearly the importance of safety procedures and applications in general engineering workshop (machining, welding, fitting and foundry work).

5. Explain the use of measuring instruments and hand tools correctly.

6. Identify correctly welding defects, types of joints, distortion, welding terminologies and symbols in arc welding.

7. Perform wood turning work according to prescribed procedures.

Diploma 3rd Semester

E&C / E&E

Electronic Devices Lab

1 Explain VI characteristics of PN JN diode

2 Explain VI characteristics of Regulator

3 Explain Input/Output characteristics of CE Transistor

4 Explain Frequencis response of RC coupled amplifer

5 Explain Emitter follower

6 Explain RC phase shift oscillator

7 Explain UJT characteristics

Electrical Circuits & Instrumentation

1 Verification of Kirchoff’s Voltage and current law

2 Verification of Thevenin’s theorem

3 To conduct OC and SC test to determine the efficiency of transformer

4 To Calibrate of ammeter and Voltmeter

5 To measure the amplitude and frequency using dual trace CRO

6 To measure displacement using LVDT

7 To measure the strain using strain gauge

Mech / Civil

Engineering Mechanics Lab

LIST OF PRACTICALS

SL Topics

1. Determine of elongation of wire under external load.

2. Study the Universal testing machine and perform the tensile test..

3. Study the torsion testing machine and perform the torsion test.

4. Study the Impact testing machine and perform the Impact tests (Izod & Charpy).

5. study the Brinell hardness testing machine & perform the Brinell hardness test.

7. Perform compression & bending tests on UTM.

10. Draw shear Force, Bending Moment Diagrams for a simply Supported Beam under Point and Distributed Loads.

All B.Tech – Ist Semester

Chemistry

1. How water is softened for using boilers

2. What are the effects of water in boilers.

3. Give the mechanism of corrosion on iron

4. Give the methods of corrosion control.

5. How air pollution causes.

6. How water pollution causes.

7. Give the differences between conductor and semiconductor.

Electrical Technology

1 Conduct the necessary experiment to draw the open circuit characteristic of the given D.C Shunt generator. Tabulate the results and show the shape of the curve

2. Conduct the necessary experiment to draw the load characteristic of the given compound generator which is

a) Cumulatively Compoundedb) Differentially Compounded

Draw the shape of the load characteristic3. Conduct the necessary experimental to draw the load characteristic of the D.C generator

4.Conduct the necessary experiment to draw the speed load characteristic of a shunt motor. Draw the curve after tabulating the results.

5.Conduct the necessary experiment to draw the speed load characteristic of a Compound motor. Draw the curve

6.Conduct the necessary experiment to draw the speed load characteristic of DC series motor

7.Conduct the necessary experiments to find the efficency and regulation of a single phase transformer

Note: Each answer should havea) Circuit Diagramb) Steps in Conduct of Experimentc) Table of resultsd) Shapes of characteristic if anye) Steps in Calculation.

B.Tech – 3rd Semester

E&C / E&E

SUBJECT:DIGITAL ELECTRONICS Lab

1. Logic Gates-I-AND,OR,NOT(Using IC’S)

2. Logic Gates-II-NAND,NOR,Eclusive OR(Using IC’s)

3. Half- adder and Half-subtractor using IC Logic Gates

4. Full-adder and Full subtractor using IC Logic Gates

5. Master Slave JK Flip-Flop using Logic gates

6. Verification of Truth tables for RS,D,T and JK Flip-flops

7. Multiplexer and De-multiplexer Truth table verification

SUBJECT: Signals & Networks LAB

1 Explain about shift Invariance or time Invariance?

2 Explain the representation of Poles & Zeros in Laplace transform?

3. Explain the methods to find Inverse Laplace transform?

4. Explain about properties of Transfer Functions?

5 Explain about Hybrid and ABCD parameter?

6. Explain the Equilibrium equations used in Matrix forms?

7. Explain the input and output impedence of the two – port parameters

Mechanical FLUID MECHANICS LAB

1. To determine the coefficient of impact for vanes.

2. To determine coefficient of discharge of an orificemeter.

3. To determine the coefficient of discharge of Notch (V and Rectangular types ).

4. To determine the friction factor for the pipes.

5. To determine the coefficient of discharge of venturimeter.

6. To determine the coefficient of discharge, contraction & velocity of an orifice.

7. To verify the Bernoullis Theorem.

8. To find critical Reynolds number for a pipe flow.

9. To determine the meta-centric height of a floating body.

10. To determine the minor losses due to sudden enlargement, sudden contraction and bends.

Electrical Machines Lab

1 Conduct the necessary experiment to draw the open circuit characteristic of the given D.C Shunt generator. Tabulate the results and show the shape of the curve

2. Conduct the necessary experiment to draw the load characteristic of the given compound generator which is

a) Cumulatively Compoundedb) Differentially Compounded

Draw the shape of the load characteristic3. Conduct the necessary experimental to draw the load characteristic of the D.C generator

4.Conduct the necessary experiment to draw the speed load characteristic of a shunt motor. Draw the curve after tabulating the results.

5.Conduct the necessary experiment to draw the speed load characteristic of a Compound motor. Draw the curve

6.Conduct the necessary experiment to draw the speed load characteristic of DC series motor

7.Conduct the necessary experiments to find the efficency and regulation of a single phase transformer

Note: Each answer should have1 Circuit Diagram2 Steps in Conduct of Experiment3 Table of results4 Shapes of characteristic if any5 Steps in Calculation.

.

CIVIL

HYDRAULICS AND HYDRAULIC MACHINES

1.Explain how venture meter is calibrated?

2.Explain how orifice meter is calibrated ?

3.Explain how broad crested weir is calibrated?

4.Explain how coefficient of friction is found for a given pipe?

5.Explain how Cv,Cc,Cd are found for the given vertical orifice?

6.Explain how coefficient of impact of jet on flat vane?

7.Explain how overall efficiency of a centrifugal pump is found?

HIGHWAY OR TRANSPORTATION ENGG. LAB.

1.Explain how ductility of bitumen is found in laboratory?

2.Explain how C.B.R value is found for the given soil sample?

3.How aggregate crushing value is found for the given aggregate sample?

4. Explain how flash and fire point for the bituminous material is found/

5.Explain how viscosity of bitumen is found?

6.Explain how Marshal stability value is found

7.Explain how aggregate impact value is found?M.Tech – I st Semester

E&C

Semiconductor devices and modeling Lab

1 Conduct a suitable experiment on the given semiconductor diode to establish the “piece wise linear” model. What will be the mathematically idealized diode model? Draw the shape of the I-V characteristic. Write down the equation for the Shockley diode.

2 On the given semiconductor diode (power diode), conduct a suitable experiment to obtain the voltage dependant “reverse recovery current” model. What is a SPICE model? Explain.

3 On the given Tunnel diode, conduct a suitable experiment to obtain a physical-compact model for tunneling action. Clearly indicate the tunneling area on the I-V characteristic obtained.

4 On the given power BJT, obtain “saturation curves compact modeling” of power bi-polar transistor and also determine h-parameters by open and short circuit tests.

5 Determine the and of the P-N-P transistor given to you and confirm the inter relationship between and experimentally.

6 Obtain the saturation currents for the given MOSFET and fetch the parameters of , rd and gm. Derive the inter relation between them.

E&E

Machines and drives modeling Lab

1. Conduct a suitable experiment to derive the load characteristic of a single phase induction motor and plot the curves of

a) B.H.P Vs load current

b) Torque Vs Speed

2. Experimentally, determine the speed-load characteristic for the given D/C series motor. Prepare a proper tabulation to plot the efficiency Vs load current. Mention the applications for the D/C series motor. Also mention the precautions for starting of a series motor.

3. What are the types of D/C shunt motor and mention the types of drives used with it.

(a) Obtain the load characteristic for a D/C shunt motor coupled to a proper load. Plot it on a graph paper. Also, calculate the torque at full load and efficiency at half load.

4. What are the several types of compound motors available and

a) Also mention the special drives that are used along with the cumulatively compounded D/C motor.

b) Obtain the speed load characteristic for cumulative compounded long shunt compound motor by using the dynamometer type brake load.

5. Explain with circuit diagrams the following models of differentially compounded D/C motor.

a) Short shunt compounded D/C motor

b) Long shunt compound D/C motor

c) The short shunt differential compounded D/C motor

Give suitable drives that are preferred for each of the above motors.6. Clearly explain the operation principle of stepper motor.

a) Write programmer for clockwise and anti-clockwise rotation and demonstrate. Use the given stepper motor and the micro controller.

b) Write down the types of stepper motors and the several applications.

Mechanical

Machine Vibration Analysis Lab)List of Experiments

1. Motorized gyroscope – Study of gyroscopic effect and couple.

2. Governor - Determination of range sensitivity, effort etc., for Watts, Porter, Proell, and Hartnell Governors.

3. Single degree of freedom Spring Mass System – Determination of natural frequency and verification of Laws of springs – Damping coefficient determination.

4. Multi degree freedom suspension system – Determination of influence coefficient.

5. Determination of torsional natural frequency of single and Double Rotor systems.- Undamped and Damped Natural frequencies.

6. Vibration Absorber – Tuned vibration absorber.

7. Vibration of Equivalent Spring mass system – undamped and damped vibration.

8. Whirling of shafts – Determination of critical speeds of shafts with concentrated loads.

9. Balancing of rotating masses. (b) Balancing of reciprocating masses.

10. Transverse vibration of Free-Free beam – with and without concentrated masses.

11. Forced Vibration of Cantilever beam – Mode shapes and natural frequencies.

12. Determination of transmissibility ratio using vibrating table.

13. Introduction to data acquisition systems.

14. Forced Vibration Analysis Using Digital vibration indicator.

15. Free/ Damped/ Forced Vibration Simulation using dynamic simulation software.

CIVIL

Behaviour & Design of Reinforced Concrete Structure.

1. Explain how compressive strength of cement is found?

2. Explain how simply supported beams are behaved under udl?

3. Explain how columns behave under different end conditions?

4. Explain how reinforcement helps resisting crack development in beams which are simply supported and how reinforcement should be in beams?

5. Explain how columns buckle under axial load when both ends are fixed?

6. Explain how workability of concrete is found by using compaction factor test?

7. Explain how fineness modulus of sand is found?

7. How to find initial and final setting time for cement?

BSIT-35B.Sc (IT) 3rd Semester Practical Programme List

OOP with C++

1. Write a c++ program to perform arithmetic operations using objects and classes.

2. Write a c++ program to find volume of cube, cylinder, rectangular, box using function overloading

3. Write a program to concatenate & two strings using Operator overloading4. Write a program to demonstrate virtual function5. Write a program to declare result of a student using multi level inheritance6. Wirte a program in c++ to accept details of N Employees. Generate the

employee number for them using the static variable and static functions7. Write a C++ program to define a class called customer, with account

number, name, address as data members; deposite(), withdraw() and balance () as member functions , consider the banking transactions, carefully

8. Write a C++ program to create an object of class called employee containing the employee code, name, designation, basic salary, HRA, DA, gross salary as data members. Process 10 such objects using constructors and destructors

9. Write a program in C++ to add Co-ordinates of plain, the class contains X, Y Coordinates. Create Three objects, Use constructor to pass one pair of coordinates and a function to accept the Second Pair. Add these variables of two objects and store result in the third object

10. Write a program to create a palindrome numbers.

BSIT-33

B.Sc (IT) 3rd Semester Practical Programme List

Web Programming & Java Script

1. Write Java Script program to generate a login form with the following fieldsLoginname and Password use Submit and Cancel Button in the form and allow for the data entry to made in the form

2. Write a Java Script Program that’s simulates the working of simple calculator

3. Create an application format to get admission to a college4. Create a enquiry form to prepare a list of voter id’s5. Write a Java script that accepts a text and blinks it in a browser window at the

end of every second. Blink the text with alternate colour6. Write a java script function called “DELETE COOKIE” that will delete a

cookie which is created7. Write a cookie in javascript to maintain the history of URL’s which are

recently browsed8. Develop a website of college information which contains atleast five static

pages9. Write a java Script code that will display alert message “you are in the text

box”, whenever a user point a mouse on the text box10. Write a javascript program to display a message “Welcome to homepage” use

the following commands one at a time (Alert()), confirm(), prompt())

MSIT -17M.Sc (IT) I Semester Practical List [New Scheme]

Advanced RDBMS (Lab)

1. Create a table ‘STUDENT’ to store the details of marks of a student.After creating the tables, do the following:a. Set field properties of each field.b. Modify fields in the table.C. Add Records2. For the tables created in above problem, do the following:a. Apply filters to list students with marks greater then 60.b. Apply filters to get transactions for a date.c. Sort students by name.d. Sort transactions by date.e. Create queries to list students with Aggregate <300 and Aggregate

>= 250. f. Total transaction quantity for a given date.

3. Using the tables created in problem number 1, do the following:a. Create forms to view data.b. Add, Delete and Save records through the forms created.c. Change the structure of the above forms in design view.

4. Using the tables created in problem number 1, and/ or related queries,generate the following reports:

a. List of students with marks >60 in English.b. List of students whose Average is >80.c. List of Items for a given Transaction date.

d. Day-wise transactions for each month under the month’s headingshowing total transaction at the end.

5. Create Employee table to store the details with following fields 1. Emp Id 2. Name 3. Address 4. Basic Salary 5. Net Salary

6. Using above table Generate the following query with reportsa) By Employee Nob) By salary wisec) list the employees, whose basic salary is > 10000

MSIT-14M.Sc (IT) I Semester Practical List

Analysis and Design of Algorithms

Write Programs using C and Execute1. Implement Selection sort technique and find time and space complexity.2. Implement Insertion sort technique and find time and space complexity.3. Implement Merge sort technique and find time and space complexity.4. Implement Hashing technique to determine whether an arbitrary element ispresent or not.5. Write a program to find minimal spanning tree traversal considering your own tree.6. Write a program to find the product of two numbers using Halving and Doublingmethod.7. Implement Knapsack problem.8. Implement Heap sort technique.9. Implement backtracking algorithm.10. Implement Job scheduling method.11. Implement Cassette filling method.12. Sort number in ascending order using Bubble sort.

MSIT-12M.Sc (IT) I Semester Practical Programme List

Computer Programming Using C

1. PROGRAM to find the root of quadratic equation using nested IF.2. Given two numbers PROGRAM to perform arithmetic operations usingSwitch statements.3. PROGRAM to generate Fibonacci series up to N numbers using Do-Whileloop.4. PROGRAM to find reverse of the given number, sum & count the number ofdigits & Check whether the given no is Palindrome or not using While – doloop.5. PROGRAM to generate Prime numbers using For loop.6. PROGRAM to search an element using linear technique.7. PROGRAM to add & subtract two M x N Matrices.8. PROGRAM to multiply M x N Matrices.9. PROGRAM to Transpose M x N Matrix using function.10. PROGRAM to find the factorial of a number using recursion.11. PROGRAM to swap numbers using function & pointers.

12. PROGRAM to insert a sub-string into a string.13. PROGRAM to read &write information of an employee using structure.14. PROGRAM to find largest & smallest of n numbers.15. PROGRAM to sort numbers using selection sort.16. PROGRAM to construct Pyramid of digits.17. PROGRAM to generate Pascal triangle.18. PROGRAM to check whether the given number is a Fibonacci term or not.19. PROGRAM to check whether the given number is a factorial of a number ornot.20. PROGRAM to find the second largest of N numbers.