welcome to the big 2012
TRANSCRIPT
8/10/2019 Welcome to the Big 2012
http://slidepdf.com/reader/full/welcome-to-the-big-2012 1/14
Page 1 of 14
Welcome to the Biofeedback Interfaced
Graphics (BIG) 2012!
8/10/2019 Welcome to the Big 2012
http://slidepdf.com/reader/full/welcome-to-the-big-2012 2/14
Page 2 of 14
Contents
What is the Biofeedback Interfaced Graphics (BIG) program? .................................................................. 3
How to use the Biofeedback Interfaced Graphics (BIG)? ........................................................................... 3
Activation of the Biofeedback Interfaced Graphics (BIG) ...................................................................... 3
Getting started ..................................................................................................................................... 5
The Energy Map ................................................................................................................................... 6
3D Energy In and Out ......................................................................................................................... 10
Balance Right and Left........................................................................................................................ 10
Balance Intensity ................................................................................................................................ 11
Biofeedback Movies and Autofocus Emphasis .................................................................................... 12
GSR Voluntary Change ....................................................................................................................... 14
8/10/2019 Welcome to the Big 2012
http://slidepdf.com/reader/full/welcome-to-the-big-2012 3/14
Page 3 of 14
What is the Biofeedback Interfaced Graphics (BIG) program?
The Biofeedback Interfaced Graphics (B.I.G.) program has been developed by the inventor of the SCIO
System, Prof. Nelson/Desire’ Dubounet and Levente Ungvary, our dedicated programmer. The
Biofeedback Interfaced Graphics is an external program like the Body Viewer, Iridology, and Disease
Dictionary, that can be used together with the main SCIO Software or by itself, externally.
The Biofeedback Interfaced Graphics (B.I.G.) is an illustration of the SCIO’s Biofeedback functions: seeing
the stress reactions of our body and being able to monitor variations and changes occurring in different
physiological parameters.
How to use the Biofeedback Interfaced Graphics (BIG)?
Activation of the Biofeedback Interfaced Graphics (BIG)
The Biofeedback Interfaced Graphics (BIG) is automatically installed with the 5-5-2012 SCIO Software. An
icon called BIG will appear on your desktop. You can load and activate the Biofeedback Interfaced
Graphics (BIG) either from inside of the main SCIO Software under System Power Settings or directly
from your desktop.
8/10/2019 Welcome to the Big 2012
http://slidepdf.com/reader/full/welcome-to-the-big-2012 4/14
Page 4 of 14
Double click on the BIG icon on your Desktop or start it from the main SCIO Software. If you start the BIG
from outside of the SCIO Software, you will get a device recognition panel. This means that your SCIO
device is properly connected and functioning.
8/10/2019 Welcome to the Big 2012
http://slidepdf.com/reader/full/welcome-to-the-big-2012 5/14
Page 5 of 14
Please click on ‘Close’ to proceed.
The next window will ask you for the Username and Password of your QXSUBSPACE account. This is the
first window that appears when you start the BIG from inside the main SCIO Software. Please type your
username and password in the appropriate box and click on ‘Send to Server’.
You will be redirected to Paypal where you need to complete the Activation fee payment. After
completing the payment, the following message will be displayed:
Please click on ‘OK’ to start the BIG Software.
Getting started
To start the Biofeedback Interfaced Graphics (BIG) program, double click on the BIG icon on the desktop
or click on System Power Settings and Biofeedback Interfaced Graphics inside the main test panel of the
SCIO Software. The program will start with the default screen, the Energy Map.
8/10/2019 Welcome to the Big 2012
http://slidepdf.com/reader/full/welcome-to-the-big-2012 6/14
Page 6 of 14
From this default screen, you can access several panels either from the top menu bar or from the drop
down menu.
The Energy Map
The Energy Map is a panel that allows the practitioner to view the real time changes of the physiological
parameters of the body electric. You can use this panel from inside and outside of the Main SCIOprogram.
8/10/2019 Welcome to the Big 2012
http://slidepdf.com/reader/full/welcome-to-the-big-2012 7/14
Page 7 of 14
The graphic in the middle shows the harnesses measurements changes in real time. You can use this
function while you do a therapy from the SCIO Program or just on its own and see how the parameters
are changing while the therapy is working or while the patient is meditating or doing other Biofeedback
trainings.
The graphic on the top right side of the panel shows the output level. As soon as we stop the
measurement and the output the graphic will reflect that. This function can be used from both inside
and outside of the main SCIO Program.
The bars on the left side of the panel show the connection intensity between the client and the harness
measured through all electrodes and combinations of different measurement points.
8/10/2019 Welcome to the Big 2012
http://slidepdf.com/reader/full/welcome-to-the-big-2012 8/14
Page 8 of 14
The Vitruvian Man on the bottom right corner is a representation of what the patient needs to balance.
By watching the feedback the device gives, the patient needs to concentrate and relax in order to have
the three bars in the middle. Here you have the option to increase sensitivity or Head gain if you feel it is
needed.
The VARHO Screen is only available when you start the BIG from the main SCIO Software. While doing a
therapy from inside the SCIO Software, you can see the how the VARHOP values modify during theBiofeedback training.
8/10/2019 Welcome to the Big 2012
http://slidepdf.com/reader/full/welcome-to-the-big-2012 9/14
Page 9 of 14
Please click on ‘Close’ when you wish to exit the VARHO panel and on ’Stop Measurement’ when you
completed the therapy or wish to switch to another panel.
8/10/2019 Welcome to the Big 2012
http://slidepdf.com/reader/full/welcome-to-the-big-2012 10/14
Page 10 of 14
3D Energy In and Out
3D Energy In and Out is a function available only from outside of the main SCIO Software that allows you
to view the patient’s ECG from different harness measurement points.
Select the harness point measurement and click on ‘Start ECG’. Click on ‘Stop ECG’ and ‘OK’ to stop the
measurement and move to another panel.
Balance Right and Left
Balance Right and Left Panel is a panel available both from inside and outside of the SCIO Software. This
is a Biofeedback Training Program that helps balancing the left and right side. To start the training please
click on ‘Start measurement’ and instruct your patient to concentrate and balance all bars to the middle.
You have the option of selecting a function filter from the right side. There is also the option of
increasing Gain or Sensitivity in case of a weak connection. To end the training, simply click on ‘Stop
Measurement’.
8/10/2019 Welcome to the Big 2012
http://slidepdf.com/reader/full/welcome-to-the-big-2012 11/14
Page 11 of 14
Balance Intensity
The Balance Intensity is only available from outside of the main SCIO Software. The goal of this particular
Biofeedback Training is to have the patient concentrate and move the blue dot in the middle in order to
achieve physiological improvements with the change of the negative thoughts, emotions and behaviors.
8/10/2019 Welcome to the Big 2012
http://slidepdf.com/reader/full/welcome-to-the-big-2012 12/14
Page 12 of 14
In this panel we have the possibility of loading a different background picture to increase the
effectiveness of the training and increase the sensitivity and gain in case of weak connection.
Biofeedback Movies and Autofocus Emphasis
This panel works from both inside and outside of the main SCIO Software, with the exception of the AFE
Autofocus Therapies. While you are doing a regular biofeedback session or you also have the option of
playing a guided imagery video to your patients that they can watch to help assist their session.
8/10/2019 Welcome to the Big 2012
http://slidepdf.com/reader/full/welcome-to-the-big-2012 13/14
Page 13 of 14
The AFE Autofocus Emphasis Therapies are only available from the BIG when started outside of the main
SCIO Software. You have the option of selecting between several therapy types. These are 30 minutes
therapies that can be stopped anytime the practitioner feels appropriate.
8/10/2019 Welcome to the Big 2012
http://slidepdf.com/reader/full/welcome-to-the-big-2012 14/14
Page 14 of 14
GSR Voluntary Change
The GSR Voluntary Change is available only from from the BIG started outside of the main SCIO Software.
This panel gives you the option of performing GSR measurements and stimulation. The practitioner can
set the Minimum and Maximum Frequency, the Intensity Level from 0 to 4 Volts, the Harmonic and
Fibonacci harmonic and click on ’Start GSR Stim’ to initiate the voltammetric signal.
To stop the stimulation, simply click on ‘Stop GSR Stim’.
If you have any questions, please feel free to contact us at [email protected]