well pad process equipment and services

Well Pad Process Equipment and Services

Locations

Built to Order and Finished Goods InventoryVessel packaging Yes Yes Yes Yes

Vessel fabrication Yes Yes Yes

Blasting and painting Yes Yes YesHydrotesting Yes Yes Yes YesInspection Yes Yes Yes

Welding Yes Yes Yes Yes

Tank fabrication, repair, delivery, and setting Yes Yes

Tank stair and landing fabrication Yes Yes

Parts and ServicesRelief valve test and repair Yes Yes Yes Yes

Fire tube repair Yes Yes

Burner maintenance Yes Yes YesGeneral maintenance services Yes Yes Yes YesOTC parts sales Yes Yes Yes Yes

Bloomfield, NM Odessa, TX Casper, WY Williston, NDProperty size, acres 10 11.5 8.6 14Facility size, square footage 18,800 20,310 17,789 81,800

OneSurfaceReservoir integrated production system

Schlumberger is your one source for process equipment, parts, and services— both OEM and aftermarket—to meet your needs and solve production problems. From routine inspection and sample analysis to providing solutions that can integrate process engineering, manufacturing, project management, and a complete range of parts and onsite services, our OneSurfaceSM well pad process equipment and services offerings will help you achieve and maintain optimized production performance.

Wherever and whenever you need us, the OneSurface network of service locations is there for you.

Wherever and whenever you need us, Wherever and whenever you need us,

OneSurface is your one source for innovative technologies to increase throughput and improve efficiency while maintaining product quality. This approach to process optimization also lowers opex through reduced staffing, decreased power and chemicals consumption, and minimized downtime.

Glycol dehydration systems Effective removal of water and volatile organic compounds (VOCs) including BTEX at a lower opex than conventional desiccants and lower capex than solid bed systems

Horizontal longitudinal flow separatorNATCO* separation technology employed for efficient three-phase separation across the large interfacial area of the horizontal design

Key Process Equipment Offerings

NATCO VUF* three-phase vertical upflow separatorSimple, economical gas scrubber with high droplet-removal performance for streams at low pressure and low flow rate

NATCO DUAL FREQUENCY* electrostatic treater Dehydration and desalter with significant process improvement—often more than 100%—resulting from using both AC and DC power for a customized electrostatic field

MOZLEY Wellhead Desander* solids removal system Superior downstream protection from mechanical damage and erosion delivered by self-cleaning hydrocyclones with wear-resistant proprietary liners


ELECTROMAX* electrostatic heater treater Emulsion problems solved with tandem treatment: electrostatic-forced accelerated coalescence and gravity separation by the NATCO PERFORMAX* horizontal high-efficiency phase separator

NATCO SHV Combustor* internal-burner emission control system Greater than 99.9% destruction efficiency achieved for all VOCs by combining a low flame and wide-open external combustor area


NATCO SHV Flare* emission control system Proprietary internal-burner venturi for 95%–98% destruction efficiency of VOCs and BTEX paired with external superheater for reduced liquids accumulation and disposal

The all-encompassing OneSurface services provide peace of mind for owners and operators. A core element is the comprehensive preventive maintenance program for achieving and sustaining equipment reliability while maintaining regulatory compliance through inspection and diagnosis, maintenance, and the resolution of breakdowns, emissions issues, safety device failures, or other events that cause downtime and raise opex and capex. This integrated approach to optimizing all components and processes from the wellhead to the sales line increases both efficiency and field productivity.

Pressure relief device certification Application engineering, inspection, and repair with National Board of Boiler and Pressure Vessel Inspectors VR and NB certifications

Well Pad Services

Well Pad Services

Burner system analysis

Specification, maintenance and troubleshooting, and performance and emissions analysis for pilotless and conventional burners

Fire tube inspection

Comprehensive inspection for operability, safety, and heating efficiency and field repair and replacement

Startup and commissioning

Expertise-backed assurance that processing systems and components are properly designed, installed, and moved into operability

Emissions analysis

Emissions monitoring and analysis with adjustment and repair to maintain compliance and operational economics

OEM and aftermarket parts

Extensive inventory of parts that meet or exceed the OEM design standards and specifications to ensure reliability and lower maintenance costs following repair and installation

Retrofit and upgrade

Proprietary diagnosis of existing processes and any OEM or aftermarket equipment to identify simple enhancements for current technologies and opportunities to integrate new, more efficient technologies

Well Pad Services

Certifications

With service quality assurance to industry standards and our quality management system, OneSurface is your single interface to maximize recovery, manage risk, and optimize production.

API Recommended Practice 12N Operations, Maintenance, and Testing of Firebox Flame Arrestors

ASME Boiler and Pressure Vessel Code (BPVC) Section VIII Division 1, Division 2 and Repairs or Alterations U, U2, and R

ASME B31.3 Process Piping

ASME B31.1 Power Piping

National Board of Boiler and Pressure Vessel Inspectors NB-18 Pressure Relief Device Certification: VR and NB certifications

US Department of Transportation (DOT) Operator Qualification (OQ)

well pad process equipment and services

Documents