Micronics, Inc. 300 Constitution Avenue Portsmouth, NH 03801 USA

Tel: 603.433.1299 Fax: 603.433.6673

www.Micronicsinc.com

Trusted Pressure Filtration Experts

Since 1983

What You Need for CGR Filter Cloth Installation

Cloth change-out is critical to efficient, effective press operations. Micronics provides you with both the tools and “How-To” tips to make CGR Filter Cloth Installation & Removal much easier.

• Allows for the least amount of fatigue for press operators – a replacement for cumbersome hammers and mallets

• Delivers over 1000 blows per minute• Interchangeable tips• Lightweight at 2 lbs• Easily held in palm of hand• Operating pressure: 50-125 psi• Air consumption: 2-4 cfm

Steel Tip PN #009183

Aluminum Tip PN #009848

Hard Plastic Tip PN #007078

Tip Options for AH-1 Air Hammer

Micronics Model AH-1 Air Hammer – PN #005752

Micronics Polypropylene Wedges

Used in conjunction with the Micronics Air Hammer to make filter cloth installation even easier

Contact your trusted Micronics sales team for all your filter cloth, plates, press, parts, and service needs.

Check-out our new How-to Videos on the Filter Cloth Overview page on the Micronics website, and see how Micronics can help you minimize operator fatigue during CGR Filter Cloth Installation.

Polypropylene Cloth/Cake Cleaning Spatulas (Scrapers)

Used to loosen or discharge filter press cake from the filter cloth. Note: Sharp metal scrapers will damage cloth and shorten the life of all filter media. Only polypropylene should be used.

PN #006078 PN #006079

12 inch Red Standard Scraper PN #006545

26 inch Gray Scraper PN #008430

5 foot Red Standard Scraper plus 5 ft. extension

PN #006543Micronics Filtration, LLC1201 Riverfront Parkway Chattanooga, TN 37402 USA1 423.698.8988

www.Micronicsinc.com

Trusted Pressure Filtration Experts

Since 1983