what's new in sprutcam 11
TRANSCRIPT
3-axismilling
CAD systemdata
transform
Industrialrobots
Additivetechnology
Collisionsdetection
5-axis milling
Lathemachining
NC-codesimulation
Pencil millingPencil milling Corners cleanupCorners cleanup
The rest machining operation
generates passes along inner corners
of the part. There are single passes
and series of parallel passes.
The rest machining operation takes the
diameter of the previous tool as a
parameter and generates passes where
the previous tool would leave
unmachined material.
The operation generates continuous
helical passes with the given vertical
stepover between the top and the
bottom level.
Helical operationHelical operation Scallop operationScallop operation
The operation generates the path of
finishing machining of separately taken
surfaces regardless of their curvature.
• Grooving in multiple layers• The toolpath is built taking into an account the remaining material• Toolpath calculation on the left, the right or at once to two edges of the cutting insert• The automatic determination of the narrow grooves on the workpiece• Machining of the narrow grooves by the size of the width of cutting edge incisor
Grooving cycleGrooving cycle
Including the remaining materialExcluding the remaining material
RoughingRoughingVersionVersion 11 11VersionVersion 10 10
Roughing rotary operation generates NC program, taking into account the remaining material. It can be compared with the «waterline roughing» operation, but not in the plane and on the cylinder around the axis of rotation of the part.The job zone is defined by:
• the minimal and maximal axial positions• the angular sector• top and bottom levels of machining
Strategies:• circular• spiral• linear
Step depth is defined separately.
Along the isoparametric curves
Along the curves on the surface
Along the edges of the workpiece
ContouringContouring
Surfacing operationSurfacing operation
The finishing operation allows machining of surface
models with a variety of strategies and tool axis
orientation modes.
StrategiesStrategies
Parallel to vertical plane
Parallel to 3d plane
Parallel to horizontal plane
StrategiesStrategies
Across curve
Around rotary axis
Between two curves
Job zoneJob zone
Start margin
Limit by points
Zone width
ToolTool axisaxis orientationorientation modesmodes
Fixed
Automatic calculation of the
tilt angle
FlankNormal to surface
Gouge avoidance
Through the point
To rotary axis
Through the curve
ToolTool axisaxis orientationorientation modesmodes
In tool plane
Along tool axisBy surface normal
Perpendicular to tool axis
ElementsElements
ModesModesStraight Zig-zag Spline
On a plane At the surface
ModesModes
Check holder Check workpiece Check fixtures
• Visualization of reach in the graphics area
• Reach inspector at change the diameter of the
mandrel and the tool length
• Finding the optimal angle tilt of the tool axis at
which the greatest possible volume of the material
machining
StrategiesStrategies
Trim toolpath Frontal tilting Side tilting
• Automatically detect dangerous sites of the path
• Removal of dangerous path sections of NC
• Flexible mechanism for setting collision avoidance
• Tool axis position control while avoiding collisions
Max. tilt angle Additional tilt angle
Blend distance
ParametersParameters
Clearance Check tool
Smooth factor
Visualization of robot axes map:•Accelerated and work movement zones •Inaccessibility zones•Singularity zones•Collision zones•Permissible displacement zone
• Automatic construction of the optimal path of the robot
• Handling process simulation based on the kinematics of the robot
• Use of additional axes (linear and rotary)
Power SHAPE
1. Addins from new versions of
CAD systems are updated
2. New file formats are added:• PLY (Polygon File Format) –
for 3D scanner using• AMF files (Additive
Manufacturing File) – is an
open standard for describing
objects for additive
manufacturing processes
(such as 3D printing)