wilson aug 2016.doc

Kory L. Wilson3614 STONE CREST COURT • RICHMOND, TX 77406

281-381-7638 • [email protected]

Objective: Seeking a position as a Subsea Superintendent or Sr Subsea Engineer that will provide an opportunity for me to utilize and challenge my technical skills.

Qualifications:I am a well-organized, self-motivated individual. I have been working on DP and Moored MUX control drilling systems and production systems for over 20 years. I have over 10 years experience as a Sr. Subsea Engineer on at least 14 5th generation DP oilrigs and drill ships, 20 other rigs with MUX controls (Cameron/Shaffer/Hydril) and non-MUX BOP rigs. I was on the manufacturing and commissioning team for the BP Thunderhorse Project. While working for Cameron, I was the lead service engineer installing complete MUX BOP subsea systems on more than six rigs

Professional Certifications:H2s Recognition Course, DONUT Familiarization, North Sea Basic Water Survival Training,Isograph Application School, Helicopter Safety Course, Cameron MUX School, NOV MUX School, NOV AHC School, NOV CMC School, NOV MRT School, OPITO Tropical Basic Offshore Safety, SulfGulf IADC Rigpass, Well Control School

Technical Skills: Professionalism, Safety Orientated, Team Leader, Trouble Shooting Skills, Tubing bending, Microsoft Project

Technical Experience: Worked with Team Leads and HSE to compose many Commission, Testing and Safety

procedures. Commission, inspected, repaired & tested Cameron equipment

o Pod – MUX & Conventional (all Generations)o BOP – T, TL, U, U2o Rams – Standard, Booster, Super Shearso Ram Locks – Ram Lock, Wedge Lock, ST Locko Annulars – D, DLo Connectors – DWHC, HC, Model 70o Riser – HMF, Load Kingo Misc. - HPU, Diverter panels, MCS Failsafe valves, Acoustic Pods, Auto Shear &

HMF Panels Commission, inspected, repaired & tested NOV equipment

o Pod – MUX & Conventional (all Generations)o BOP – NXT, SLXo Rams – 14”, 22”, Boostero Ram Locks – Ultralock II, Ultralock IIB, Pos-locko Annulars – Standardo Riser – DT-2, FT-H, MR6Ho Misc. - HPU, Diverter panels, Acoustic Pods, Deadman Panels

Commission, inspected, repaired & tested Hydril equipmento Pod – MUX & Conventional (all Generations)o BOP – Standardo Annulars - GKo Misc. - HPU, Diverter panels

Commission, inspected, repaired & tested Vetco Connectors – HD, Super HD, LAR Operate & pressure tested the BOP on the surface & on the seabed as required.

of 2

mailto:[email protected]



Direct the deck and drill crews in the running and recovery of the BOP and Marine Riser equipment.

Direct the assembly, installation & nipple down the BOP & all well control equipment as required.

Performed the many job assignments of a Sr. Subsea Engineer such as operate, maintain, ordered parts and repair the subsea BOP control system.

Commissioning of Cameron, ABB, Oceaneering, Shaffer and NOV drilling equipment (BOP, Pods, umbilicals, MUX and Hydraulic reels and surface panels).

Commissioning of Cameron and Kvaerner production equipment (Trees, Production pods and surface equipment).

Commissioning of Cameron Shut down Panels on land wells. Commissioning and Installation of Maritime Hydraulics (Aker Kvaerner), Shaffer &

NOV BOP Transporter, Tree Transporter, BOP Crane, Tree Cranes, Moonpool Baskets, Underhull Guides, Riser Tensioners, CMC’s (Crown Mounted Compensators), AHC (Active Heave Compensators) and DSC (Drill String Compensators).

Commissioning, Installation and repair of NOV & Cameron Tension Ring, Spider and Gimbals.

Commissioning, Installation and repair of Cameron & NOV Riser Hydraulic and Manual test tools.

Installation of Kvaerner and Oceaneering Subsea hydraulic umbilicals. Installation of Cameron Electrical master control stations. Installation of Kvaerner and Cameron Hydraulic and Electrical flying leads. Installation of Customer Specific Transducers. (pressure and temperature) Manufacturing, assembly, testing, and installation of Kvaerner, ABB, Cameron and

NOV subsea/land hydraulic and electro hydraulic, production and drilling systems, and intervention equipment.

Assembly, installation and repair of Cameron & NOV Subsea Electronic Modules. (SEM)

Integration of units (Customer Specific) with current units already installed. Terminated and commissioned Cameron and ABB MUX cables with copper wire and

fiber optics. Inspected, repaired, and tested Vetco pods, HPU and Diverter panels and wellhead

connectors. Operated and Maintained WOM Choke Manifold Valves. Operated and Maintained Airdyne & Hamworthy HP air compressors. Worked with Oceaneering and Sonsub ROV’s. Worked on and repaired Hydraulics (Aker Kvaerner) and NOV Rig Main HPU. Tube bending (1/4-inch to 2-inch & ¼-inch to1-inch medium and high pressure

autoclave) Software knowledge (Windows, Microsoft Office, Microsoft Project, Rockwell Software

Programs, Excel, Adobe Acrobat and IsaGRAF 3.30)

Professional Experience: Sr. MUX Subsea Engineer, TOI (Deepwater Invictus) Feb 2015 Sr. MUX Subsea Engineer, Ensco (DS6) Aug2013 – Feb 2015 Sr. MUX Subsea Supervisor, Seadrill America (West Gemini) July 2010 – July 2013 Sr. MUX Subsea Supervisor, Seadrill America (West Polaris/Capella) May 2008 – July

2010 Sr. MUX Subsea Engineer/Surveyor, WEST Engineering February 2005 to May 2008 Sr. MUX Subsea Engineer, Pride Offshore (Thunderhorse Rig) May 2004 – February

2005 Service Engineer/Subsea Engineer, Cameron Controls 2000 - 2004 Service Technician, DEL Packaging 1999 - 2000

of 2




Hydraulic Service Technician, Kvaerner Oilfield Products FSSL Controls 1994-1999

Strengths: Highly self-motivated and enthusiastic. Dependable and diligent. Very organized and goal oriented. A team player / work well with others. Ability to walk into any situation, assess the problem and solve it fast and effectively. Strong troubleshooting skills

Education: Houston Community College - Houston, Texas - 1995 (35 hours) Wharton Junior College - Sugarland, Texas - 1994 (44 hours) McMurray University - Abilene, Texas -1993 (18 Hours) Graduated from Kempner High School - Sugarland, Texas - 1992

of 2


wilson aug 2016.doc

Career