wireless internet camera wireless g usb 2.0...

Wireless G USB 2.0 AdapterWireless Internet Camera

with 3G Mobile Video

�D-Link DPG-�100 Quick Install Guide

• 900MHzorabovebasedcomputerwithaminimumof256MBRAMwithWindows®XP(SP2)or2000(SP4).

• IEEE802.11bor802.11gwireless-enabledcomputer.• InternetExplorer5.xorabove,Netscape6.xorabove,Mozilla1.0

orabove.• Projector or Monitor withVGA or DVI-D connector andVGA or

DVI-Dcable.

Minimum System Requirements

Package Contents

If any of the above items are missing, please contact your reseller.

PowerSupplyD-LinkDPG-2100

� D-Link DPG-�100 Quick Install Guide

Power LEDA solid amber light indicates thedeviceisinstandbyorisready.Asolidbluelightindicatesthedeviceisactive.

Hardware Overview

AntennaAllows you to connectwirelessly.

Reset ButtonPressandholdfor5secondstoresetthedevicebacktothedefaultsettings.

Power ReceptorConnectthesuppliedpoweradapter.

DVI ConnectorConnecttoaprojectorormonitorusingaDVIcable.

Ethernet PortConnecttotheInternettoupgradefirmware.

Audio JackConnecttospeakers.

VGA ConnectorConnect to a projector ormonitorusingaVGAcable.


Connecting the DPG-2100

1. Attach the wireless antenna to the antenna connector on therear panel. Secure the antenna in place by rotating the knobat thebaseof theantennaclockwise.Besure theantenna issecureandinanuprightposition.

2. ConnectastandardVGAorDVI-DmonitorcabletotheconnectorlabeledVGAorDVI-Dontherearpanel.Youmayconnecttoaprojectororacomputermonitor.

3. Attach the external power adapter to the power connectorlocatedontherearpanelandplugthepoweradaptertoanACpoweroutlet.

4. When the DPG-2100 is connected to a monitor or projectorandfullybooted,abannerscreenwillappear.TheSSIDwillbedisplayedonthescreen.ThedefaultSSIDisprojector-0.

5. Openyourwirelessutility foryouradapterandconnect to theprojector using the displayed SSID (in infrastructure mode).Mostwirelessutilitiesofferasitesurvey.Click thesitesurveyandconnecttoprojector-0.


ClickDownload

Onceyou’veestablishedawirelessconnection,openawebbrowser.Thebrowserwillautomatically redirect to thesoftware installationscreen.

Utility Installation

ClickRun


During the installation,yourscreenmayflickerorturnblack.

ClickFinish.

YoumayreceiveaSecurityWarning message. ClickRuntocontinue.


Oncethe installation iscomplete, theDPG-2100utilityscreenwillappear.Youmaynowclosethewebbrowserscreen.

Note: Itisrecommendedthatyoucloseyourcurrentwirelessutility.The DPG-2100 utility will control the wireless connection to theDPG-2100fromnowon.

The main page will display wireless information such as status,speed,andsignalstrength.

TheprojectorInformationsectionwilldisplaythestatus,resolution,andcolorquality.

In a multi-presenter environment, to switch presenters, the firstpresentermustclickConnect/Disconnecttodisconnect.ThenthenextpresentercanclickConnect/Disconnectfromhiscomputertotakecontroloftheprojector.

Click the Freeze button to take a screen shot of your computer(without the utility) which will display through the projector. ClickUnfreezetogobacktonormaldisplay.

ClicktheHidebuttontodisplayablackscreenthroughtheprojecter.ClickUnhidetogobacktonormaldisplay.

Wireless Utility Configuration


SelectDisplay Options tobringupthedisplaypropertiesofyourcomputer.Youmayadjustthescreenresolutionand/orcolorquality.

ClickSelect Projectortobringupalistofavailableprojectors.ClickontheprojectoryouwanttouseandthenclickConnect.


SelectSettingstoconfiguretheprojectorsettingssuchaspasswordsetup,firmwareupgrade,networksettings,andwirelesssettings.

Bydefault,thereisnopassword.YoumayclickPasswordSetuptoenteranewpassword.ThispasswordwillbeneededonlytoaccesstheSettingssection.

SelectUpgrade Firmwaretoseeifanewfirmwareisavailable.TheDPG-2100mustbeconnectedtotheInternetviatheEthernetport.The device will automate the firmware upgrade process if a newfirmwareisavailable.

10D-Link DPG-�100 Quick Install Guide

The wireless settings will allow you to change the SSID and theChannel.Youmayusechannels1-11.

TheSSIDmusthavetheprefixof“projector-”.Youcanonlychangethenumberattheend.

The network settings are only for the Ethernet port on theDPG-2100.ThisisfordownloadingfirmwareupgradesandprovidingInternetaccesstopresenters.Bydefault,thedeviceissettoObtain an IP Address Automatically.

IfyouareusingstaticIPaddressesonyournetwork,entertheIPsettingsmanually.

11 D-Link DPG-�100 Quick Install Guide

ChecktheEnter the Projector Access Number to begin projectingboxtosecuretheDPG-2100(refertothetopimageonpage9).Theaccessnumberwill bedisplayedon theprojectedscreensoonlypersonswhoare invisual contactwith thedisplaywill beable tocontrolthedevice.

EntertheaccessnumberandclickOK.

TheAboutpagewillshowthecurrentutilityversion.

1�D-Link DPG-�100 Quick Install Guide

Technical SupportD-Link’swebsitecontainsthelatestuserdocumentationand

softwareupdatesforD-Linkproducts.

U.S.andCanadiancustomerscancontactD-LinkTechnicalSupportthroughourwebsiteorbyphone.

United StatesTelephone

(877)453-5465

World Wide Webhttp://support.dlink.com

CanadaTelephone

(800)361-5265

World Wide Webhttp://support.dlink.ca

Version1.0August22,2006

Copyright ©�00� D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries in the United States and other countries. Intel, the Intel logo and Intel Viiv are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Other trademarks are the property of their respective owners. Maximum wireless signal rate based on IEEE Standard �0�.11g specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead lower actual data throughput rate. Product specifications, size and shape are subject to change without notice, and actual product appearance may differ from that depicted on the packaging. Visit www.dlink.com for more details.

wireless internet camera wireless g usb 2.0...

Documents