www.echelon.com

WIRELESS OUTDOOR LIGHTING CONTROL

By

LUMEWAVE

Why Controls Matter• Up to 40% more savings on exterior

lighting, compared to LEDs alone • Full dimming and switching capabilities• Automatic diagnostics and reporting • Built-in motion detector interface• Reduced maintenance time and costs • Enhanced safety and security• Savings verified and monitored • California Title 24-2013 compliance• Adaptive control, embedded power meter

• Campus Lighting • Pathway and Area Lighting • Street Lighting • Parking Lot Lighting • Car Dealerships • Town Centers • City Parks

Lumewave by Echelon 900 Series of wireless control solutions for outdoor lighting can save energy, reduce maintenance costs, provide revenue-grade energy monitoring, report lighting system malfunctions, and work with fixtures from multiple manufacturers.Use the adaptive lighting and demand response features of the 900 Series system to drop lighting levels through multi-level dimming profiles—and bring all or some luminaires back up to high based on motion detector or other inputs. Control the system using LumeStar management software, which runs on any PC and provides a graphical map of your entire lighting system.

The Lumewave system’s distributed intelligence, point-to-multipoint communication and communication range in excess of a mile all help simplify wireless control. You gain greater efficiency and need fewer gateways, which reduces system costs while boosting reliability.

Adaptive lighting enhances public safety by providing high-quality illumination for dark streets, parking lots, and pathways.

Lumewave wireless control systems:• Are simple to install and use • Can be used with any fixture• Mount externally, with one component• Communicate peer to peer• Wireless range greater than one mile • Schedule up to eight events/night• Include AES 128 encryption for security • Available in gray and bronze colors• Feature high-side light level trimming

• Campus Lighting • Pathway and Area Lighting • Street Lighting • Parking Lot Lighting • Car Dealerships • Town Centers • City Parks

Provides the Right Amount of Light. Where it’s Needed. When it’s Needed.

This graph shows how light levels change over a 24-hour period in a typical parking lot situation. Lights are off during the day and are switched on to 50% power at dusk. Motion detectors take lighting instantly to 100%, dropping back to 50% when a user-determined time delay elapses. Soon after midnight, lighting goes off, but any motion detected brings lighting to 100% in a nearby group.

Adaptive Control with Predictive Behavior

Adding an advanced Lumewave by Echelon 900 Series control system to outdoor lighting increases savings—in energy use, maintenance costs and extended fixture life—up to 40% beyond a simple upgrade to LED technology, whether for campus pathways, a parking lot or an entire city.

Your outdoor lighting doesn’t have to be at full output all night long. Fixtures with TOP900 sys-tems can be grouped then dimmed, brought to full light levels and switched based on scheduling by time of day, or in response to light levels or nearby motion.

The Lumewave by Echelon system uses peer-to-peer communication and built-in motion detec-tors to bring lighting from low to high when motion is detected nearby. What’s more, thanks to the industry’s first Bluetooth-enabled microwave sensors (MWX-LVE), the systems can distinguish between vehicles and pedestrians and adjust the lighting accordingly, and to adapt it depending on the direction of travel.

The Lumewave by Echelon system reduces maintenance costs through nightly diagnostics, which automatically report detail information on energy usage, fixture function and malfunctions. Data can be exported in CSV format. Energy usage and operational data can be graphed within application for easy trending and analysis.

Lumewave 900 Series

Control Starts Here:

TOP900TN TOP900TL EMB-901

TOP900TLX MWX-LVE

• Works with any type of fixture • Astronomical & time-of-day programming• Peer-to-peer communication programming• Diagnostic thresholds for current and voltage• Operates from 90-305 Vac 50/60 Hz • Automatic failure notification• Photocell operation for daytime override • Average power consumption <1 W • Operates at -40 °C to +70 °C • Direct motion detector interface• 1000W/1000VA @ 100-277 Vac • Master photocell operation• 0-10 Volt dimming • On/Off and bi-level control • IEEE 802.15.4 Standard • FCC & IC Approved • IP66 Certified • Operates at 902-928mHz • RF Power +24dbm • UL & CUL Listed

Ethernet Gateway OR Cellular Gateway • Operates on 120-240 volts • Range in excess of 1 mile, or 3 miles with

base station • Range and coverage area can be increased with repeaters. Any TOP900 can be a repeater

LumeStar Software is a simple PC application• Simple to set up, schedule and program• Requires little, if any, IT department

Product Matrix

Component Product Description

Wireless Light Controller TOP900 TN Threaded Nipple Mounting for fixtures without an ANSI connector

Wireless Light Controller TOP900 TL Installs with Lumewave Photocell receptacle#900905

Wireless Light Controller TOP900 TLX Installs on Fixtures with ANSI 136.41 7 pin photocell connectors

Wireless Light Control Module EMB901 Module format for installation inside an OEM’s fixture

Microwave Sensor MWX-LVE-180U Bidirectional long range radar based sensor

Microwave Sensor MWX-LVE-90U One directional long range radar based sensor

Learn how you can benefit from our outdoor solutions by calling + 1 408 938 5200 or by visiting us online at www.echelon.com.

System SoftwareGateways

By

LUMEWAVE